Search USGS⌕ Search

SEARCH · Search USGS

Results for “ESS Open Archive”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

218 records · Page 10Linked to original sources
USGS1977

Leachate plumes in ground water from Babylon and Islip landfills, Long Island, New York

Landfills operated by the Towns of Babylon and Islip in southwest and central Suffolk County contain urban refuse, incinerated garbage, and scavenger (cesspool) waste; some industrial refuse is deposited at the Babylon site. The Islip landfill was started in 1933, the Babylon landfill in 1947. The landfills are in contact with and discharge leachate into the highly permeable upper glacial aquifer (hydraulic conducitvity 190 to 500 ft/d [feet per day]). The aquifer is 74 feet thick at the Babylon landfill and 170 feet thick at the Islip landfill. The leachate-enriched water occupies the entire thickness of the aquifer beneath both landfills, but hydrologic boundaries retard downward migration of the plumes to deeper aquifers. The Babylon plume is 1,900 feet wide at the landfill and narrows to about 700 feet near its terminus 10,000 feet from the landfill. The Islip plume is 1,400 feet wide at the landfill and narrows to 500 feet near its terminus 5,000 feet from the landfill. Hydrochemical maps and sections show the distribution of the major chemical constituents of the plumes. The most highly leachate-enriched ground water obtained was from the Babylon site; it contained 860 mg/L (milligrams per liter) sodium, 110 mg/L potassium, 565 mg/L calcium, 100 mg/L magnesium, 2,700 mg/L bicarbonate, and 1,300 mg/L chloride. Sulfate was notably absent or in low concentration in most parts of both plumes. Nitrogen in plume water was mostly in the form NH4+, and concentrations as high as 90 mg/L were found; concentrations of nitrogen as N in the plume were less than 10 mg/L. As much as 440 mg/L iron and 190 mg/L manganese were found in the leachate-enriched water. Samples were also tested for arsenic, boron, cadmium, cobalt, chromium, copper, mercury, nickel, lead, selenium, strontium, and zinc. Boron was more or less ubiquitous and was found in concentrations as high as 2 mg/L. Organic carbon was found in concentrations as high as 2,250 mg/L in the most highly leachate-enriched water but attenuated rapidly to less than 20 mg/L. Dissolved-solids concentrations near the landfills were between 400 and 3,000 mg/L at Babylon and between 500 and 1,500 mg/L at Islip. Ground-water temperatures near the landfills exceed those in ambient water by as much as 7°C at Babylon and 16°C at Islip. Heat contributed by the landfills was mostly dissipated within 0.4 mi of the landfill, butat Islip, the warm leachate-enriched water extended 0.5 mi downgradient. The entrance of leachate into the less dense ground water as pulsations after rainfall may explain the presence of high leachate enrichment near the bottom of the aquifer. A comparison of the physical characteristics of leachate-enriched ground water with those of ambient water suggests that the downward movement of leachate results from its greater density. Simulation of the movement and dispersion of the Babylon plume with a mathematical dispersion model indicated the coefficient of longitudinal dispersion to be about 60 ft 2 /d (feet squared per day) and the ground-water velocity to be 1 ft/d. However, the velocity determined from the hydraulic gradient and public-supply wells in the area was 4 ft/d, which would cause a plume four times as long as that predicted by the mathmatical dispersion model. At the Islip site, the plume was one-third the length calculated on the basis of the age of the landfill. The shortness of the plumes has not been explained; it may be a result of the leachate's having been too dilute to form a plume during the early years of the landfills.

New York↗
USGS1976

Helium detection as a guide for uranium exploration

Helium, a byproduct of radioactive decay, may prove to be a valuable indicator of the presence and distribution of uranium deposits. Recent technological advances permit the development of instrumentation not previously adapted for this purpose. Commercially available equipment can provide high sensitivity at low cost and allow reasonable mobility for field use. A truck-mounted mass-spectrometer, tuned for helium-4, permits immediate adjustment or modification of sampling patterns in response to accumulating data. The inlet system of the spectrometer has been designed to allow flexibility in gas analyses from various sample types--soil gas, atmosphere, or gases in water. Sensitivity of the instrument is better than 50 parts of helium per 10 9 parts of gas. Replicate samples and standards can be analyzed in only 3 minutes. Helium in soil gas is being used for the initial evaluation of the technique. A hollow probe, as much as 2 m long, is driven into the ground; and a 10-cc syringe is used to purge the probe and extract the gas. This sample is then injected into the inlet system and introduced into the spectrometer at constant pressure. The output signal is displayed on a chart recorder. Investigations can be performed on a qualitative, relative basis, or on a quantitative basis by comparison to calibrated helium standards. Preliminary field testing includes studies of the responses to variations in wind speed, temperature, barometric pressure, moisture, and sampling depth over extended time periods, as well as studies of geologic controls on the helium content in soil gas. Surveys over known uranium occurrences reveal some anomalous helium distributions. This report describes an updated technological approach to an old idea: that of using helium, a byproduct of uranium radioactive decay, as an exploration tool for uranium. Helium is the sixth most abundant gas found in the earth's atmosphere (Table 1). It is an inert gas and very mobile, mixing rapidly. When the alpha particles from the radioactive decay of uranium and thorium pick up two electrons, atoms of the isotope helium-4 are formed. Several helium-4 atoms are produced from each decay series of U-238, U-235, and Th-232 (fig. 1). The half-lives of the parent isotopes are5also shown in figure 1. One gram of uranium will produce ~10 5 atoms of helium-4 per second, and one gram of thorium produces ~2.5 x 10 4 atoms of helium-4 per second (fig. 2). Calculations of the helium produced from the crust and mantle reveal that 1,125 x 10 30 atoms per year are produced, but only 7 x 10 30 atoms per year escape from the earth (Damon and Kulp, 1958). More is being produced than is being lost; in fact, the total atmospheric content of helium could be produced in only 2 million years (MacDonald, 1963)! However, all the crustal and mantle helium-4 does not degas into the atmosphere as it is formed. It is trapped in crystal lattices and in pore spaces within the earth. What this means is that there is excess helium-4 in the earth--excess, that is, compared to the atmospheric concentration in equilibrium with the helium-4 escape rate into space and the helium-4 flux from the crust and mantle (Nicolet, 1957). Near-surface pockets of high helium-4 concentrations are known, and some natural gas fields are so enriched that they are the source for commercial production of helium. Work by Roberts and others (1975) has shown high helium concentration in the soil gas associated with geothermal areas; and work by Clark and Kugler (1973), Dyck (1975), and Goldak (1974), for example, has noted high helium concentrations in soils and waters in the vicinity of uranium deposits. These latter studies certainly indicate the potential of helium detection for use as an exploration tool for uranium.

Open-File Report↗
USGS2024

Elastic stress coupling between supraglacial lakes

Supraglacial lakes have been observed to drain within hours of each other, leading to the hypothesis that stress transmission following one drainage may be sufficient to induce hydro-fracture-driven drainages of other nearby lakes. However, available observations characterizing drainage-induced stress perturbations have been insufficient to evaluate this hypothesis. Here, we use ice-sheet surface-displacement observations from a dense global positioning system array deployed in the Greenland Ice Sheet ablation zone to investigate elastic stress transmission between three neighboring supraglacial lake basins. We find that drainage of a central lake can place neighboring basins in either tensional or compressional stress relative to their hydro-fracture scarp orientations, either promoting or inhibiting hydro-fracture initiation beneath those lakes. For two lakes located within our array that drain close in time, we identify tensional surface stresses caused by ice-sheet uplift due to basal-cavity opening as the physical explanation for these lakes' temporally clustered hydro-fracture-driven drainages and frequent triggering behavior. However, lake-drainage-induced stresses in the up-flowline direction remain low beyond the margins of the drained lakes. This short stress-coupling length scale is consistent with idealized lake-drainage scenarios for a range of lake volumes and ice-sheet thicknesses. Thus, on elastic timescales, our observations and idealized-model results support a stress-transmission hypothesis for inducing hydro-fracture-driven drainage of lakes located within the region of basal cavity opening produced by the initial drainage, but refute this hypothesis for distal lakes.

JGR Earth Surface↗
USGS2026

Computation of regional groundwater budgets for the Virginia Coastal Plain aquifer system

Computation of detailed groundwater flow budgets for subdivisions of the Virginia Coastal Plain aquifer system has enabled quantification and more thorough understanding of groundwater flow within this important water resource. A zone budget analysis based on previously published groundwater models of the Virginia Coastal Plain and Virginia Eastern Shore indicates that groundwater conditions vary substantially throughout the Coastal Plain aquifer system because of local variations in hydrogeology and historical and ongoing variations in groundwater use and management. Decades of substantial groundwater withdrawal from the Coastal Plain aquifer system have altered groundwater flow from predevelopment conditions. Rates of sustainable withdrawal are limited because the downward groundwater flow rate into confined aquifers is a relatively small part of the total groundwater budget for the aquifer system compared to the rate of recharge at the land surface. Analyses of groundwater budgets from the Virginia Coastal Plain model indicate that groundwater flow is generally outward from the surficial aquifer to rivers and coastal waterbodies and downward through a series of underlying aquifers and confining units to the Potomac aquifer, which is the deepest aquifer and the source of most groundwater withdrawals. Downward flow into the Potomac aquifer is estimated to be only 7 percent of total net precipitation-derived net recharge at the land surface but makes up about 66 percent of inflow to the aquifer in Virginia, with much of the remaining inflow occurring laterally from outside of defined groundwater budget regions in Virginia. For several decades prior to 2010, high rates of withdrawal from the Potomac aquifer resulted in substantial decline in groundwater storage in the aquifer and in most overlying aquifers and confining units. From 2010 to 2023, rates of withdrawal substantially lower than the historical maximum resulted in small net increases in groundwater storage in the confined aquifer system for most regions of the Virginia Coastal Plain. Nevertheless, for the same period, groundwater storage for the entire model domain continues to incrementally decline, indicating that storage recovery in Virginia is offset by a continued decrease in storage in areas beneath the Chesapeake Bay or adjacent areas of Maryland and North Carolina. Withdrawals from the Potomac aquifer have induced substantial downward flow which is a large part of groundwater budgets for confined aquifers such as the Potomac. For the most recent simulated conditions (2023) downward groundwater flow continues, but because vertical flow rates are a function of the difference between water pressure in the upper surficial systems and lower confined units, rates of downward flow are lower than those in earlier decades as the confined water levels partially recover from larger groundwater withdrawals in the past. Geographically, groundwater flow is generally inward from perimeter regions of the Virginia Coastal Plain toward central regions with the largest withdrawal rates. Groundwater inflow from coastal regions could be contributing to saltwater intrusion, even though that was not measured in this study. Analyses of groundwater budgets from the Virginia Eastern Shore peninsula, a geographic region of the Virginia Coastal Plain, indicate that groundwater flow for that isolated aquifer system is generally outward from the surficial aquifer to coastal water bodies and downward into the confined Yorktown-Eastover aquifer system, which is the source of most withdrawals. Downward groundwater flow into the confined Yorktown-Eastover aquifer system is estimated to be less than 2 percent of total recharge and less than 9 percent of net recharge at the water table but makes up more than 93 percent of all inflow to the confined aquifer system. Decades of substantial but relatively consistent groundwater withdrawals have induced greater downward flow rates into the confined aquifer system but also have resulted in loss of groundwater from storage. For the most recent simulated period (2023), estimated storage loss accounts for slightly under 7 percent of withdrawals from the confined aquifer system. The reported withdrawal rate for this period from the confined Yorktown-Eastover system is near the highest reported rate for the Virginia Eastern Shore, which means that the storage depletion is expected to continue, even though groundwater levels appear to be relatively stable. Estimated groundwater flow rates upward from the confining unit underlying the Yorktown-Eastover system and low rates of inflow from coastal water bodies underscore ongoing concerns about up-coning and lateral intrusion of salty groundwater.

Virginia↗
USGS2000

Regional evaluation of evapotranspiration in the Everglades

Nine sites in the Florida Everglades were selected and instrumented for collection of data necessary for evapotranspiration-determination using the Bowen-ratio energy-budget method. The sites were selected to represent the sawgrass or cattail marshes, wet prairie, and open-water areas that constitute most of the natural Everglades system. At each site, measurements necessary for evapotranspiration (ET) calculation and modeling were automatically made and stored on-site at 15- or 30-minute intervals. Data collected included air temperature and humidity at two heights, wind speed and direction, incoming solar radiation, net solar radiation, water level and temperature, soil moisture content, soil temperature, soil heat flux, and rainfall. Data summarized in this report were collected from January 1996 through December 1997, and the development of site-specific and regional models of ET for this period is described. Latent heat flux is the energy flux density equivalent of the ET rate. Modified Priestley-Taylor models of latent heat flux as a function of selected independent variables were developed at each site. These models were used to fill in periods of missing latent heat flux measurement, and to develop regional models of the entire Everglades region. The regional models may be used to estimate ET in wet prairie, sawgrass or cattail marsh, and open-water portions of the natural Everglades system. The models are not applicable to forested areas or to the brackish areas adjacent to Florida Bay. Two types of regional models were developed. One type of model uses measurements of available energy at a site, together with incoming solar energy and water depth, to estimate hourly ET. This available-energy model requires site data for net radiation, water heat storage, and soil heat flux, as well as data for incoming solar radiation and water depth. The other type of model requires only incoming solar energy, air temperature, and water depth data to provide estimates of hourly ET. The second model thus uses data that are more readily available than the data required for the available-energy model. Computed ET mean annual totals for all nine sites for the 1996-97 period ranged from 42.4 inches per year at a site where the water level is below land surface for several months each year to 57.4 inches per year at an open-water site with no emergent vegetation. Although the density of photosynthetically-active plant leaves has been shown to relate directly to ET in some studies, it does not appear to relate directly to ET in the Everglades, based on comparison of annual ET data with leaf-area index, defined as the Normalized Difference Vegetation Index (NDVI), data from satellite imagery. NDVI and ET appear to be inversely related in the Everglades. The greatest ET rates occurred at open-water sites where the NDVI data indicated the lowest leaf-area index. Among the remaining vegetated sites, there is no clear relation between ET and NDVI, though the highest ET rate corresponded to the lowest NDVI and one of the lowest ET rates corresponded to the highest NDVI value. The variation in ET follows a seasonal pattern, with lowest monthly ET totals occurring in December through February, and highest ET occurring in May through August. The greatest range in monthly ET among all nine sites for the 2-year period occurred at site 3: from 1.81 inches in December 1997 to 6.84 inches in July 1996. A study to compare the Bowen-ratio/energy balance method of ET measurement with the eddy-correlation method was done at one site from June 22, 1998, through September 28, 1998. This comparison indicated that both methods gave comparable values of the Bowen ratio, but there was a considerable difference in available energy measured by the two methods. The mean of all 30-minute measured turbulent heat fluxes from the eddy-correlation apparatus for June 22 through September 29, 1998, was 137.4 watts per square meter, and the mean of the corresponding measured energy was 163.6 watts per square meter, or about 20 percent greater. The disagreement in mean energy fluxes measured by the two methods is problematical and is not fully understood. Although the difference seems to be related to friction velocity, and is practically non-existent at values of friction velocity greater than 0.3 meter per second, the "correctness" of either method cannot be determined with the data available.

Florida↗
USGS2024

Groundwater, surface-water, and water-chemistry data, Black Mesa area, northeastern Arizona—2019–2021

The Navajo (N) aquifer is an extensive aquifer and the primary source of groundwater in the 5,400-square-mile Black Mesa area in northeastern Arizona. Water availability is an important issue in the Black Mesa area because of the arid climate, past industrial water use, and continued water requirements for municipal use by a growing population. Precipitation in the area typically ranges from less than 6 to more than 16 inches per year, depending on location. The U.S. Geological Survey water-monitoring program in the Black Mesa area began in 1971 and provides information about the long-term effects of groundwater withdrawals from the N aquifer for industrial and municipal uses. This report presents the results of data collected as part of the monitoring program in the Black Mesa area from calendar years 2020–2021 and, additionally, uses streamflow statistics from November and December 2019. The monitoring program includes measurements of (1) groundwater withdrawals (pumping), (2) groundwater levels, (3) spring discharge, (4) surface-water discharge, and (5) groundwater chemistry. In calendar year 2020, total groundwater withdrawals were estimated to be 2,680 acre-feet (acre-ft), and, in 2021, total withdrawals were estimated to be 2,570 acre-ft. Total withdrawals during 2021 were about 65 percent less than total withdrawals in 2005 because the Peabody Western Coal Company discontinued its use of water to transport coal in a coal slurry pipeline after 2005 and ceased mining operations in 2019. Owing to Navajo Nation and Hopi Reservation access restrictions during the Coronavirus pandemic, water levels were not collected from municipal wells in 2020 or 2021. Water levels measured in 2021 from wells completed in the unconfined areas of the N aquifer within the Black Mesa area showed a decline in 7 of 13 wells when compared with water levels from the prestress period (prior to 1965). The changes in water levels across all 13 wells ranged from +8.4 feet (ft) to −42.4 ft, and the median change was −0.4 ft. Water levels also showed decline in 11 of 12 wells measured in the confined area of the aquifer when compared to the prestress period. The median change for the confined area of the aquifer was −25.9 ft, with changes across all 12 wells ranging from +17.3 ft to −133.7 ft. Spring flow was measured at four springs between 2020 and 2021. Flow fluctuated during the period of record for Burro Spring and Pasture Canyon Spring, but a decreasing trend was statistically significant (p<0.05) at Moenkopi School Spring and Unnamed Spring near Dennehotso, Arizona. Discharge at Burro Spring has remained relatively constant since it was first measured in the 1980s, and discharge at Pasture Canyon Spring has fluctuated for the period of record. Continuous records of surface-water discharge in the Black Mesa area were collected from streamflow-gaging stations at the following sites: Moenkopi Wash at Moenkopi 09401260 (1976–2021), Dinnebito Wash near Sand Springs 09401110 (1993–2020), Polacca Wash near Second Mesa 09400568 (1994–2020), and Pasture Canyon Springs 09401265 (2004–2021). Median winter flows (November through February) of each winter were used as an estimate of the amount of groundwater discharge at the above-named sites. For the period of record, the median winter flows have generally remained constant at Polacca Wash and Pasture Canyon Springs, whereas a decreasing trend was observed at Moenkopi Wash and Dinnebito Wash. In 2020 and 2021, water samples were collected from a total of four springs in the Black Mesa area and analyzed for selected chemical constituents. Results from the four springs were compared with previous analyses from the same springs. Dissolved solids, chloride, and sulfate concentrations increased at Moenkopi School Spring during the more than 30 years of record at that site. Concentrations of dissolved solids and sulfate at Pasture Canyon Spring have not varied significantly (p>0.05) since the early 1980s, and there is no increasing or decreasing trend in those data. However, concentrations of chloride from Pasture Canyon Spring show a diminishing trend. Concentrations of dissolved solids, chloride, and sulfate at Unnamed Spring near Dennehotso have varied for the period of record, but there is no statistical trend in the data. Concentrations of dissolved solids at Burro Spring have varied for the period of record, but there is no statistical trend in the data. However, concentrations of chloride and sulfate from Burro Spring show a trend towards lower concentrations.

Arizona↗
USGS2024

Assessment of water levels, nitrate, and arsenic in the Carson Valley Alluvial Aquifer and the development of a data visualization tool for the Carson River Basin, Nevada

Residents of Carson Valley, Douglas County, Nevada, rely on the basin-fill alluvial aquifer underlying the valley for drinking water. Since the 1980s, groundwater levels and water-quality data have been collected to monitor the status of the aquifer system and to assist in planning efforts to address current (2024) and future demand. The U.S. Geological Survey (USGS), in cooperation with Douglas County, Nevada, evaluated trends in water levels, nitrate, and arsenic concentrations from a network of monitoring and domestic wells in Carson Valley. This work also assessed the monitoring well network to determine the suitability of wells for characterizing the occurrence of arsenic in the groundwater. Monitoring of constituents, such as nitrate and arsenic concentrations, is needed to assess changes in contaminant distribution and to evaluate the effect that changing land use and groundwater pumping has on their occurrence and transport. Results of the trend analysis indicate water levels are declining ( p <0.05) in 17 of 26 selected monitoring wells (65 percent). Areas with the largest change in water levels, with more than 20 feet of declines, were within the community areas of Johnson Lane, Ruhenstroth, South Agricultural, East Valley, and Fish Springs. Variations in water levels measured in wells from the Central Agricultural, Minden, Foothill, Alpine County (one well), and Gardnerville Ranchos areas show periods of increase and decrease over time, but they also maintain long-term declining trends ( p <0.05). Increases in nitrate concentrations in groundwater samples collected from 9 out of 14 selected monitoring wells (64 percent) are statistically significant ( p <0.05) within the Ruhenstroth, Gardnerville Ranchos, East Valley, Genoa, and Johnson Lane community areas. Samples collected from a well in Indian Hills/Jacks Valley indicated a decreasing trend in nitrate concentration over time. Nitrate concentrations in samples collected from wells in East Valley, Genoa, Johnson Lane, and Indian Hills/Jack Valley were consistently low (less than 3 milligrams per liter [mg/L]) and stable. Nitrate concentrations from selected wells in Johnson Lane and Garnerville Ranchos exceeded the U.S. Environmental Protection Agency (EPA) maximum contaminant level (MCL) of 10 mg/L (as nitrogen) and have trends that are increasing over time. In 2022, a sample collected from Johnson Lane had a concentration (7.3 mg/L) below the MCL with an increasing trend over time. Temporal trend analyses for groundwater arsenic concentrations in Carson Valley could not be done because of a lack of temporal data. However, using available historical data, arsenic concentrations seem to be greater in groundwater from wells located on the eastern and northern areas of the valley than in wells located on the western or southern areas. Groundwater arsenic concentrations exceed 5 micrograms per liter (μg/L) in most samples collected from wells in Johnson Lane, Airport, Central Agricultural, and East Valley areas and in many cases exceed the U.S. Environmental Protection Agency (EPA) MCL of 10 μg/L. Data indicate that groundwater from domestic wells screened at deeper intervals are likely more vulnerable to elevated arsenic concentrations than shallower wells. A groundwater network evaluation for Carson Valley identified potential modifications in the sampling locations and frequency to better understand the effect of groundwater pumping in communities where municipal and domestic demand are greatest, potentially enhancing understanding of contaminant transport in these areas. Potential modifications to the active well network include reducing the frequency of sample collection from existing network wells (6 out of 11) that have consistently shown low and stable nitrate concentrations, adding wells in areas where data are sparse, and increasing the number of wells in areas with elevated groundwater nitrate concentrations. Including the analysis of arsenic in samples from the active groundwater monitoring well network will provide more detail on the temporal and spatial variability of arsenic concentrations. A visualization tool for the Carson River Basin was developed to provide access to discrete and near real-time hydrologic and water-quality data. The Carson River Basin Hydro Mapper (CBH; U.S. Geological Survey, 2023b) shows active and historical discrete water levels measured by the USGS and the State of Nevada Division of Water Resources, discrete groundwater nitrate and arsenic concentration data collected by the USGS, near real-time streamflow, and surface water levels for select waterbodies. The hydrologic data in the CBH provides resource managers, the public, and the scientific community with an easily accessible tool to present and communicate the most up-to-date information available about local and basin-wide water resources.

Nevada↗
USGS2025

Land cover change within wetland complexes at Dixie Meadows, Churchill County, Nevada: 2015 – 2023

Dixie Meadows, Nevada, is a system of geothermal springs and seeps that feed a complex of marshes and wetland meadows that are located within lands managed by the Bureau of Land Management (BLM) and the Department of Defense (DOD). A previous U.S. Geological Survey report documented variability in satellite imagery-based land cover classifications for seven wetland complexes at near monthly time intervals between October 2015 and January 2022. This report presents additional data, extending analysis to November 2023. Land cover classifications between October 2015 and November 2023 demonstrated an association between vegetation cover characteristics and surface moisture, with Class 1 having dry, bare soil or sparse upland vegetation, Class 2 having moist, bare soil or sparse to small vegetation, Class 3 having dense green vegetation with potentially saturated soil conditions, Class 4 having a mix of shallow surface water, saturated soil, and dense green vegetation, and Class 5 having open surface water. Most of the wetland complexes occur close to spring outflows primarily within land managed by the DOD, though portions are also within BLM lands. The intervening and surrounding landscape outside of the wetland complexes assessed in this study are managed by the BLM. As a result, Class 1 land covers had the largest areal coverage for BLM managed lands. Classes 2 and 3 land covers were primarily mapped inside the wetland complexes and thus had the largest area coverage within DOD managed lands. Class 4 was almost exclusively mapped within the wetland complexes and thus was largely contained within DOD managed lands. Class 5 (open water) was exclusively mapped in and adjacent to a single wetland complex with catchment ponds on land managed by the BLM. The distribution of these land cover classes over the study period was seasonally and annually variable. Land cover areas of Classes 1 and 2 were larger during the spring months. Conversely, land cover areas of Classes 3 and 4 tended to be greatest during the summer or fall. These patterns might be influenced by differences in seasonal water sources and phenology.

Nevada↗
USGS2026

Shallow differentiation of primitive arc magmas at the Jurassic Emigrant Gap mafic complex, Sierra Nevada, California

The Emigrant Gap composite pluton exposes ultramafic to silicic intrusive rocks that preserve the chemical evolution of primitive mafic arc magmas and their open-system interactions in the upper crust during mid-Jurassic growth of the Sierra Nevada batholith (California). We present field and petrographic observations and mineral and whole-rock chemistry of the ~35-km 2 ultramafic to dioritic Emigrant Gap mafic complex and an adjacent penecontemporaneous ~90-km 2 granodiorite that together make up the composite pluton. In the Emigrant Gap mafic complex, four roughly central masses of dunite, wehrlite, and olivine clinopyroxenite are surrounded by weakly layered gabbronorite and non-layered diorite. The ultramafic rocks are cumulates formed from near-liquidus minerals of primitive arc magmas that accumulated in steep feeder zones with substantial modification by melt–mush reaction as primitive liquids repeatedly transited the mush-filled conduits. The dominant gabbronoritic rocks are the variably accumulative products of more advanced crystallization–differentiation of arc tholeiitic basalts and basaltic andesites. The adjacent granodiorite intrusion originated separately and preserves field and geochemical evidence for assimilation of metasedimentary rocks. Open-system hybridization between the gabbronoritic mushes and the granodioritic magma produced an intervening body of two-pyroxene diorite. We infer that the ultramafic rocks and gabbronorite of the Emigrant Gap mafic complex crystallized from near-primitive arc basaltic to basaltic andesitic magmas at ~0.15–0.3 GPa, with estimated f O 2 of ≥FMQ +1 and dissolved H 2 O concentrations of only ~0.5–2 wt %. Notably, the Emigrant Gap composite pluton is distinct from other Mesozoic plutons in the Sierra Nevada batholith because of (1) its abundance of mafic and ultramafic rocks that crystallized from relatively primitive mafic melts and (2) the low inferred H 2 O concentrations of its parental magmas, indicated by a near absence of igneous amphibole and by the intermediate rather than calcic compositions of plagioclase. A Jurassic regional extension event probably accounts for the formation of relatively dry primitive arc magmas, as well as for their ascending to the upper crust.

California↗
USGS2025

Reconnaissance of potential alternate water supply sources for the City of Gary, West Virginia

Seven potential sources of water, consisting of free-flowing discharge from abandoned coal mines at six locations and one abandoned flooded underground coal mine air shaft, were sampled for chemical analysis to assess the quality of the groundwater emanating from the seven mine sources. The six free-flowing mine discharge sources were also assessed for discharge by current-meter measurements on two separate occasions. The U.S. Geological Survey assessed these seven sources to provide information to the City of Gary, West Virginia (W. Va.), and the City of Gary’s consulting engineer with groundwater-quality and flow data to allow them to assess the seven sites as potential alternate sources of water for the City of Gary to augment its existing supply. For the six sites where discharge could be measured, discharge ranged from a minimum of 0.082 cubic feet per second (ft 3 /s) to a maximum of 3.685 ft 3 /s. Of the six sites measured, only two, Harmon Branch at Thorpe, W. Va. (USGS site 372201081303501) and the abandoned public-supply water wells near Havaco, W. Va. (USGS site 372358081344601), had discharge in excess of 1.00 ft 3 /s. Discharge from the abandoned public supply wells was 3.685 ft 3 /s on September 20, 2023, and 2.888 ft 3 /s on October 16, 2023, and discharge from Harmon Branch at Thorpe, W. Va., was 1.049 ft 3 /s on September 22, 2023, and 1.038 ft 3 /s on October 17, 2023. Discharge in the abandoned underground mine air shaft (USGS site 372224081340901) could not be assessed, but the air shaft drains an abandoned mine that likely contains water stored in approximately 1.7 square miles (mi 2 ) of abandoned underground coal mines in the Pocahontas No. 3 coal seam, and possibly an additional 0.9 mi 2 of leakage from the overlying Pocahontas No. 4 coal seam. Discharge for the six sites measured for the study was measured during a period between September 20 and October 18, 2023, and corresponded to the 12th to the 15th percentile of flow-duration statistics for the Tug Fork downstream of Elkhorn Creek at Welch, W. Va. streamgage (USGS site 03212750). Water-quality data for the seven sites sampled overall were acceptable with respect to drinking water standards. Of the 203 constituents analyzed, only a few failed to meet applicable U.S. Environmental Protection Agency (EPA) drinking water standards. Iron exceeded the 300 micrograms per liter (μg/L) secondary maximum contaminant level (SMCL) at only 1 of the 7 sites (14.3 percent) sampled. Iron concentrations ranged from a minimum of less than (<) 5.00 μg/L to a maximum of 724 μg/L with a median concentration of 7.62 μg/L. Manganese exceeded the 50.0 μg/L SMCL at 2 of the 7 sites (28.6 percent) sampled. Manganese concentrations ranged from a minimum of 1.93 μg/L to a maximum of 271 μg/L with a median concentration of 4.03 μg/L. No sites sampled exceeded the arsenic maximum contaminant level (MCL) of 10 μg/L. Arsenic concentrations ranged from a minimum of <0.100 μg/L to a maximum of 2.35 μg/L with a median arsenic concentration of 0.200 μg/L. None of the seven sites sampled for selenium for this study exceeded the EPA MCL of 50.0 μg/L. Selenium concentrations ranged from a minimum of <0.050 μg/L to a maximum of 5.26 μg/L with a median concentration of 3.21 μg/L. All seven sites were sampled for volatile organic compounds (VOCs), semivolatile organic compounds (SVOCs), and polychlorinated biphenyls (PCBs), but most had concentrations below the detection limit. Of the 10 PCB compounds analyzed for the seven sites sampled, none contained detectable concentrations of PCBs or Aroclor compounds. Of the 44 SVOCs analyzed at each of the seven sites sampled, only 1 SVOC, acenaphthene, was detected, at a concentration of 0.02 μg/L. Of the 96 VOCs analyzed, from each of the seven sites sampled, only two were found at detectable concentrations. Trichloromethane was detected only at 1 of the 7 (14.3 percent) sites sampled at a concentration of 0.027 μg/L, and benzene was detected at the same site and 3 additional sites (4 of the 7 sites or 57.1 percent of the sites sampled) at concentrations of 0.028, 0.029, 0.021, and 0.035 μg/L, but none exceeded the EPA MCL for benzene of 5.00 μg/L. Total coliform bacteria are ubiquitous in the environment, and their presence only suggests the potential for contamination by near-surface processes. Escherichia coli ( E. coli ) bacteria are derived from either human or animal fecal material and can be an indicator of potential contamination by pathogenic bacteria or viruses. Total coliform bacteria were detected at all 7 sites sampled at concentrations ranging from 17.5 to greater than (>) 2,420 most probable number per 100 mL (MPN/100 mL) of sample, with a median total coliform concentration of 1,553 MPN/100 mL. Escherichia coli bacteria were detected at 4 of the 7 sites sampled at concentrations ranging from <1 to 11.9 MPN/100 mL, with a median E. coli concentration of 5.1 MPN/100 mL.

West Virginia↗
USGS2026

Multiple machine-learning estimation of groundwater levels and trends for the regional Mississippi River Valley alluvial aquifer

The Mississippi River Valley alluvial aquifer provides irrigation, public, and domestic water supplies across the south-central United States. Declining groundwater levels require improved characterization of changing conditions. Traditional potentiometric-surface mapping does not use all available water-level data or quantify uncertainty. To address these limitations, we developed a data-driven multiple machine-learning (MML) framework delivered through two open-source R packages. The covMRVAgen1 software assembles covariates to 155,960 monthly groundwater levels from 57,695 wells; the mmlMRVAgen1 software trains Cubist and Random Forest models, blends them, and makes 1-kilometer gridded predictions of monthly potentiometric surfaces for the period January 1980–December 2022. The MML approach provides a methodological foundation for region-scale spatiotemporal groundwater prediction and uncertainty quantification, generating 90-percent prediction limits with appropriate empirical coverage. Model performance is acceptable, with a root-mean-square error of about 4.2 feet, standard deviation of 24.82 feet, and a normalized Nash–Sutcliffe efficiency of 0.973.

Arkansas, Illinois, Louisiana, Mississippi, Missou↗
USGS1993

Hydraulic properties of the Madison aquifer system in the western Rapid City area, South Dakota

Available information on hydrogeology, data from borehole geophysical logs, and aquifer tests were used to determine the hydraulic properties of the Madison aquifer. From aquifer-test analysis, transmissivity and storage coefficient were determined for the Minnelusa and Madison aquifers, and vertical hydraulic conductivity (K v ') along with specific storage (Ss') for the Minnelusa confining bed. Borehole geophysical well logs were used to determine the thickness and location of the Minnelusa aquifer, the lower Minnelusa confining bed, and the Madison aquifer within the Madison Limestone. Porosity values determined from quantitative analysis of borehole geophysical well logs were used in analyzing the aquifer-test data. The average porosity at the two aquifer-test sites is about 10 percent in the Minnelusa aquifer, 5 percent in the lower Minnelusa confining bed, and 35 percent in the Madison aquifer. The first aquifer test, which was conducted at Rapid City production well #6, produced measured drawdown in the Minnelusa and Madison aquifers. Neuman and Witherspoon's method of determining the hydraulic properties of leaky two-aquifer systems was used to evaluate the aquifer-test data by assuming the fracture and solution-opening network is equivalent to a porous media. Analysis of the aquifer test for the Minnelusa aquifer yielded a transmissivity value of 12,000 feet squared per day and a storage coefficient of 3 x 10 -3 . The specific storage of the Minnelusa confining bed was 2 x 10 -7 per foot, and its vertical hydraulic conductivity was 0.3 foot per day. The transmissivity of the Madison aquifer at this site was 17,000 feet squared per day, and the storage coefficient was 2 x 10 -3 . The second aquifer test, which was conducted at Rapid City production well #5 (RC-5) produced measured drawdown only in the Madison aquifer. Hantush and Jacob's method of determining the hydraulic properties of leaky confined aquifers with no storage in the confining bed was used to evaluate the aquifer-test data by assuming the fracture and solution-opening network is equivalent to a porous media. The analysis of data from the RC-5 aquifer test showed that transmissivity was not equal in all directions. Hantush's method was used to determine the direction of radial anisotropy and magnitude of the major and minor axes of transmissivity. The major axis of transmissivity is at an angle of 42° east of north, and the transmissivity along this axis is about 56,000 feet squared per day. The minor axis of transmissivity is at an angle of 48° west of north, and the transmissivity along this axis is about 1,300 feet squared per day. The major axis of transmissivity intersects Cleghorn Springs, a large resurgent spring on the west edge of Rapid City. The shape of the potentiometric contours of the Madison aquifer near RC-5 agree with the orientation of the transmissivity ellipse. The average value of the storage coefficient from the isotropic analysis of the aquifer-test data was 3.5 x 10 -4 , and the average vertical hydraulic conductivity of the lower Minnelusa confining bed was 9.6 x 10 -3 foot per day.

South Dakota↗
USGS2025

REDPy: A Python tool for automated repeating earthquake detection and visualization

Detecting and cataloging seismic events are among the most fundamental tasks in seismology. Many standardized tools for these tasks exist, including the open‐source package repeating earthquake detector in Python (REDPy). REDPy generates an organized catalog of seismic events from continuous waveform data, in which events are automatically separated into groups (“families”) by their waveform similarity through cross‐correlation. REDPy also automatically generates various outputs that allow a user to visualize important trends in the catalog, which may be used in real time or in retrospective analyses to allow rapid identification of interesting features. The code was designed for near‐real‐time volcano monitoring but is applicable across a broad range of use cases in seismology and seismoacoustics. In this article, the utility and performance of REDPy are demonstrated on two highly seismogenic volcanic eruption sequences: the onset of the dome‐building eruption of Mount St. Helens, Washington, from 2004 to 2005, and the entirety of the summit caldera collapse sequence of Kīlauea, Hawai‘i, in 2018. This article is meant to be a companion to the documentation of the code; in addition to detailing the basic required inputs, script functionality, and resulting outputs, the reasonings behind several important design decisions are also discussed.

Seismological Research Letters↗
USGS2024

Developments in African industrial minerals for renewable energy

Introduction Africa is emerging as a leading source for minerals used in the manufacture of batteries for electric vehicles and in other renewable energy applications. New graphite, lithium, and rare-earth mines have or could be opened in African countries from 2017 through 2026. Estimates of production capacities for graphite, lithium, and rare-earth mines for 2023 and beyond are based upon supply-side assumptions, such as announced plans for new capacity construction and bankable feasibility studies, as well as projected trends that could affect current producing facilities in 2023 and planned new facilities projected to come online by 2026. Forward-looking information, including estimates of future production capacities, graphite flake distributions, and timing of the start of operations, are subject to risk factors and uncertainties that could cause actual events or results to differ significantly from expected outcomes. Projects listed in this report are presented as an indication of industry plans and are not a U.S. Geological Survey (USGS) prediction of what will take place. Only projects with planned startup dates are included in this report; ther graphite, lithium, and rare-earth projects in Africa without startup dates were known to be in various stages of development but are not included in this fact sheet.

Fact Sheet↗
USGS2026

CRESCENT earthquake dynamic rupture, earthquake cycle, and tsunami code verification platform

Physics-based simulations are critical for understanding natural hazards. The increasing complexity of numerical codes requires benchmark exercises to verify that different computational methods yield consistent results when solving the same governing equations. Here, we present an open-access web platform designed for the verification of earthquake dynamic rupture, seismic cycle, and tsunami simulations. The platform architecture utilizes a modular, serverless backend on Amazon Web Services (AWS) to provide scalable file processing and visualization. A lightweight static web application provides a secure interface for uploading and managing results, while the browser-based data visualization enables interactive analysis of time series and surface grid data. By using structured JavaScript Object Notation (JSON) text files to define benchmark structures, the system remains fully extensible, allowing the addition of new scenarios without modifying the underlying software logic. The platform hosts the "The Tsunami Problem Versions" (TTPV) 1 & 2, two benchmarks for 3D fully coupled earthquake dynamic rupture and tsunami generation, and provides a framework for earthquake cycle models. This community resource aims to build trust in numerical simulations and facilitate long-term collaborative code verification as modeling software continues to evolve.

Seismica↗
USGS2025

Phase 1 technical implementation plan for the expansion of the ShakeAlert earthquake early warning system to Alaska

Executive Summary The conference report accompanying the fiscal year (FY) 2022 Consolidated Appropriations Act (Public Law 117–103) for the U.S. Department of the Interior and related agencies directed the U.S. Geological Survey (USGS) to “work with the State of Alaska to develop an implementation plan to be completed within two years in order to put ShakeAlert/Earthquake Early Warning in Alaska” (p. 29). Congress included $1 million in the FY 2022 appropriation to conduct this effort. The USGS Earthquake Hazards Program, along with partner organizations, has developed the ShakeAlert earthquake early warning (EEW) system for the West Coast, which currently operates in California, Oregon, and Washington. The purpose of the system and its alert delivery partners is to reduce the impact of earthquakes and save lives and property by delivering ShakeAlert-powered alerts that are transmitted to the public via mass notification technologies, and by providing more detailed data streams to institutional users and commercial service providers to trigger automated, user-specific, protective actions. ShakeAlert was designed in such a way that it could be expanded to other U.S. regions with high earthquake risk, after the build-out of seismic and geodetic networks to support ShakeAlert in a specified region is completed and the necessary funding is secured for long-term operation and maintenance. When an earthquake occurs, seismic waves radiate from the rupturing fault like waves on a pond. It is these waves that people feel as earthquake shaking and that can cause damage to structures. Using networks of ground-motion sensors and sophisticated computer algorithms, ShakeAlert can detect an earthquake seconds after it begins, calculate its location and magnitude, and estimate the resulting intensity of shaking. Early warnings of impending shaking are then sent to people and systems that may experience damaging shaking, allowing them to take appropriate protective actions. Depending on the user’s distance from the earthquake, alerts may be delivered before, during, or after the arrival of strong shaking. There will almost always be a region near the earthquake epicenter where alerts arrive after damaging shaking has begun. The ShakeAlert system updates its ground-motion estimates as an earthquake grows larger. In response to the FY 2022 congressional direction, the USGS worked with the State of Alaska to devise this implementation plan for ShakeAlert expansion to Alaska. The USGS engaged with the Alaska Division of Homeland Security and Emergency Management (DHS&EM) and the Alaska Division of Geological and Geophysical Surveys (DGGS). A cooperative agreement was awarded to the Alaska Earthquake Center (AEC) at the University of Alaska Fairbanks (UAF) for their contributions to the plan and their work coordinating with other networks in Alaska. The USGS engaged with the Alaska Seismic Hazards Safety Commission (ASHSC) throughout the process. The USGS also held a series of Alaska stakeholder engagements. The process of developing the implementation plan was facilitated by contracted staff from Corner Alliance, which is a government consulting firm. This implementation plan describes the details and estimates the costs for a Phase 1 expansion of the ShakeAlert system to Alaska. A geographically limited Phase 1 goal was chosen that covers the highest risk and most populated areas of Alaska. The areas proposed encompass the State’s main population centers and 90 percent of the State’s population. This Phase 1 design is considered very challenging and ambitious from the viewpoint of network operators. The lessons learned if this plan is implemented could be used to consider subsequent phases to expand EEW beyond Phase 1 in Alaska in the future. ShakeAlert is built on the foundation of the sensor networks and data processing infrastructure of the USGS-led Advanced National Seismic System (ANSS). This implementation plan calls for a total of 450 high-quality, real-time EEW-capable ANSS seismic stations in Alaska: 270 new stations, 160 upgraded stations, and 20 existing stations. These seismic station numbers are based on a station spacing of 10 kilometers (km) in urban areas, 20 km in seismic source areas that endanger population centers, and 40 km in other areas. The associated costs also include support for some EEW-capable global navigation satellite system (GNSS) stations, with a focus on improving warnings for large subduction zone earthquakes. For effective EEW, ShakeAlert requires low-latency, high-availability, robust telemetry links to deliver continuous, real-time data from field stations to the data centers. The Alaska data processing hardware infrastructure would follow the general design for fail-safe operation that is used for the ShakeAlert system on the West Coast. The ShakeAlert architecture uses two independent layers: the production layer for earthquake processing and the alert layer to make alerting decisions and serve alerts to users. This implementation plan includes two geographically separated data centers in Alaska, each with two fully independent production and alert layers using the same system design developed for the West Coast. As of March 2024, the ShakeAlert system is at version 3.0.1, with more advanced versions in the development and testing pipeline. ShakeAlert originally used two algorithms to determine the location and magnitude of earthquakes using seismic data. A third algorithm that can calculate very large magnitudes of very large earthquakes with geodetic data was added in March 2024. ShakeAlert publishes several data and alert products to meet the needs of different users. All messages include the location of the earthquake, either as a point or a line, and its magnitude. Ground-shaking estimates are published in two forms, as ground-motion contours and a map grid. Providing adequate warning time for strong shaking (the “target threshold”) requires sending alerts at a threshold lower than that strong shaking level (the “alert threshold”). The thresholds for public alerting in Alaska would be a joint USGS and State decision. To have the greatest benefit, ShakeAlert-powered alerts would be delivered to institutional users and individuals by all practical pathways. The USGS alert layer can support thousands of institutional users and alert redistributors, but the USGS does not have the mission nor the infrastructure and expertise to perform mass notifications to the public or implement automatic actions for end users of the alerts. To meet this need, ShakeAlert recruits private sector “technology enablers” that have the necessary expertise to develop end-user implementations using EEW alerts with the goal of stimulating an EEW industry. Earthquake early warning alerts are useless if people do not know how to respond to them. Although the alert messages include instructions about what to do (drop, cover, and hold on), alerts are more effective if people have been trained in advance. Messages about ShakeAlert’s capabilities, limitations, and benefits could be integrated with existing earthquake education programs, including State-run programs. Therefore, ShakeAlert would coordinate with both public and private partners and stakeholders through various partnerships and agreements to accomplish consistent and ongoing public earthquake hazard education. The estimated capital cost of completing the computing infrastructure and sensor networks for the Phase 1 ShakeAlert expansion to Alaska is approximately $66 million in 2024 dollars. The annual operation and maintenance cost of the completed system is estimated to be $12 million per year in 2024 dollars when fully built out.

Alaska↗
USGS2026

Teach me how to pycap: A high-capacity well decision support tool using analytical solutions in Python

Regulatory agencies in humid temperate environments rely on timely evaluations of streamflow depletion and drawdown to protect aquatic ecosystems and existing water users. Numerical models offer detailed insights, but their complexity and time demands often preclude their practical use in rapid decision-making. We present pycap-dss, an open-source Python package that implements a suite of analytical solutions for estimating streamflow depletion and drawdown. The tool supports superposition of multiple wells and time-varying pumping, enabling cumulative impact assessments in situations with multiple wells and streams. The software is modular and extensible, allowing users to interchange solutions or add new analytical methods. A YAML-based configuration supports batch processing of multiple wells, and an optional AnalysisProject class facilitates integration with regulatory workflows. Rigorous unit and regression testing ensures computational reliability, and continuous integration supports ongoing development. We demonstrate deterministic examples of drawdown where multiple solutions are readily compared and streamflow depletion with multiple wells in the Central Sands region of Wisconsin. We also show the value of Monte Carlo analyses of streamflow depletion in the same Central Sands example, leveraging computational efficiency to evaluate the uncertainty of individual and cumulative streamflow depletion calculations from over 200 high-capacity wells.

Wisconsin↗
USGS2025

A method to obtain remotely sensed grain size distributions from nonplanar granular deposits

Constraining the grain size distribution of granular deposits with complex surfaces is difficult with existing approaches. Field and laboratory techniques are time consuming and limited by the maximum grain size that laboratories can accommodate. In this study, we present a new method to identify the coarse fraction of the grain size distribution at a debris-flow fan deposit surveyed with terrestrial laser scanning (TLS) in Glenwood Canyon, Colorado, USA. This method is a novel grain segmentation algorithm developed for application to point cloud data of deposits with complex surfaces and angular grains ranging in size from centimeters to a meter. This approach combines an existing random forest machine learning method with a novel iterative clustering algorithm. We compared the grain size distribution from our algorithm with a Wolman pebble count conducted in the field, and found a root mean squared error of less than 2 cm from the 5th to 95th percentile of the grain size distribution of grains ranging from cobble to boulder sized (6.3–78 cm in our application). Finally, we compared our new algorithm with an existing open-source grain segregation algorithm, and our method outperformed the selected alternative when applied to the debris-flow deposit point cloud.

Colorado↗