Search USGS⌕ Search

Geology topics

Angela K. Diefenbach

Publications and source records attributed to Angela K. Diefenbach.

At least 19 recordsLinked to original sources
USGS2024

Special topic—Unoccupied aircraft systems

Introduction Unoccupied aircraft systems (UAS) increasingly support volcano monitoring and eruption response activities in the United States and abroad (James and others, 2020). Advances in UAS platforms and miniaturization of sensors over the past decade have expanded the use of this technology for a wide range of applications within volcanology (Jordan, 2019; James and others, 2020). UAS can greatly enhance existing ground-, aerial-, and satellite-based observation and in situ monitoring networks at volcanoes by providing new avenues for data collection in terms of access, resolution, and timing. UAS can collect data in difficult and hazardous environments, reducing risk to occupied aircraft and (or) ground crews; support the generation of dense time series of data through frequent, low-cost, high-resolution surveys; and provide real-time, on-demand measurements at volcanic systems for indicators such as gas, thermal output, and topographic change without the need to wait for contracted aerial flight services or satellite orbit intervals. During the 2018 response to the Kīlauea eruption on the Island of Hawaiʻi, UAS were used extensively and successfully to monitor, track, investigate, and (or) warn of ongoing volcanic activity (fig. L1; Neal and others, 2019). Throughout the eruption, the UAS team was able to provide data products rapidly to emergency managers for situational awareness and to scientists for quantitative hazard assessment (Diefenbach and others, 2018). Over the course of 4 months, more than 1,200 UAS missions were flown and yielded critical data that included (1) live video to emergency operations centers in Hilo and Honolulu for situational awareness; (2) gas emission rates, compositions, and concentrations; (3) repeat nadir videos over sections of the lava channel to support measurements of lava effusion rate; (4) oblique videos for hazards assessment and outreach; and (5) photogrammetry surveys to create very high-resolution topographic models and orthophoto mosaics (Diefenbach and others, 2018). In coming years, the U.S. Geological Survey (USGS) Volcano Hazards Program (VHP) plans to expand its fleet of UAS, associated sensors, and remote pilots to enhance volcano monitoring and response capabilities. Currently (2023), USGS operational capabilities are restricted to small class UAS (sUAS; less than [<] 55 pounds) that are limited in range, payload capacity, and flight duration. Additionally, USGS-piloted platforms are restricted to the U.S. Department of the Interior Office of Aviation Services approved fleet, which includes a limited number of small and medium multi-rotor aircraft and vertical take-off and landing fixed-wing aircraft ( https://www.doi.gov/aviation/uas/fleet ). Each type of platform has advantages and disadvantages. Small rotor-wing quadcopters are fast to deploy, can be carried in a backpack, and are highly maneuverable, but are typically only equipped with a small camera and have a minimal flight range. Medium rotor-wing hexacopters can carry larger payloads (< 20 kilograms [kg]) and varied sensors, but, with the drawback of minimal flight time (<30 minutes), they typically have similar range capabilities to their smaller counterparts and are not as easily deployable. Fixed-wing platforms provide relatively long endurance (<60 minutes) and range and, with the vertical take-off and landing capabilities, can launch and land in relatively small spaces; however, they have less maneuverability and hovering capability than the rotor-wing platforms. Although the 2018 Kīlauea response showed the benefit of the current UAS fleet, all platforms have limited range [<10 kilometers (km)], such that operators must be stationed relatively close to the region of interest. To expand UAS monitoring capabilities, VHP staff have been working closely with industry partners and the National Aeronautics and Space Administration to develop a next-generation UAS for volcano monitoring (Kern and others, 2020). This ruggedized, mid-range (>20 km), multiparametric (gas and photogrammetry) UAS has been developed to meet volcano monitoring needs, particularly at less accessible, more dangerous stratovolcanoes. It is expected in the coming years that additional UAS platforms with new and smaller sensors will expand our capabilities to meet the Nation’s volcano monitoring objectives.

Scientific Investigations Report↗
USGS2024

Twenty years of explosive-effusive activity at El Reventador volcano (Ecuador) recorded in its geomorphology

Shifts in activity at long-active, open-vent volcanoes are difficult to forecast because precursory signals are enigmatic and can be lost in and amongst daily activity. Here, we propose that crater and vent morphologies, along with summit height, can help us bring some insights into future activity at one of Ecuador’s most active volcanoes El Reventador. On 3 November 2002, El Reventador volcano experienced the largest eruption in Ecuador in the last 140 years and has been continuously active ever since with transitions between and coexistence of explosive and effusive activity, characterized by Strombolian and Vulcanian behavior. Based on the analysis of a large dataset of thermal and visual images, we determined that in the last 20 years of activity, the volcano faced three destructive events: A. Destruction of the upper part of the summit leaving a north-south breached crater (3 November 2002), B. NE border crater collapse (2017), and C. NW flank collapse (2018), with two periods of reconstruction of the edifice: Period 1. Refill of the crater (2002-early 2018) and Period 2. Refill of the 2018 scar (April 2018–December 2022). Through photogrammetric analysis of visual and thermal images acquired in 11 overflights of the volcano, we created a time-series of digital elevation models (DEMs) to determine the maximum height of the volcano at each date, quantify the volume changes between successive dates, and characterize the morphological changes in the summit region. We estimate that approximately 34.1x10 6 m 3 of volcanic material was removed from the volcano due to destructive events, whereas 64.1x10 6 m 3 was added by constructive processes. The pre-2002 summit height was 3,560 m and due to the 2002 eruption it decreased to 3,527 m; it regained its previous height between 2014 and 2015 and the summit crater was completely filled by early April 2018. Event A resulted from an intrusion of magma that erupted violently; we proposed that Events B and C could be a result of an intrusion as well but may also be due to a lack of stability of the volcano summit which occurs when it reaches its maximum height of approximately 3,590 and 3,600 m.

El Reventador↗
USGS2023

High-resolution InSAR reveals localized pre-eruptive deformation inside the crater of Agung Volcano, Indonesia

During a volcanic crisis, high-rate, localized deformation can indicate magma close to the surface, with important implications for eruption forecasting. However, only a few such examples have been reported, because frequent, dense monitoring is needed. High-resolution Synthetic Aperture Radar (SAR) is capable of achieving <1 m spatial resolution and sub-weekly revisit times, but is under-used. Here we use high-resolution satellite SAR imagery from COSMO-SkyMed, TerraSAR-X, and Sentinel-1 to detect intra-crater uplift preceding the November 2017 onset of eruptive activity at Agung, Indonesia. Processing the SAR imagery with an up-to-date, accurate, high-resolution digital elevation model was crucial for preventing aliasing of the deformation signal and for accurate georeferencing. We show that >15 cm of line-of-sight shortening occurred over a 400-by-400 m area on the crater floor in September-October 2017, accompanying a deep seismic swarm and flank dyke intrusion. We attribute the deformation to the pressurization of a shallow (<200 m deep) hydrothermal system by the injection of magmatic gases and fluids. We also observe a second pulse of intra-crater deformation of 3–5 cm within 4 days to 11 hr prior to the first phreatomagmatic eruption, which is consistent with interaction between the hydrothermal system and the ascending magma. This phreatomagmatic eruption created the central pathway used during the final stages of magma ascent. Our observations have important implications for understanding unrest and eruption forecasting, and demonstrate the potential of monitoring with high-resolution SAR.

Agung Volcano, Bali↗
USGS2021

Lava effusion rate evolution and erupted volume during the 2018 Kīlauea lower East Rift Zone eruption

The 2018 eruption on the lower East Rift Zone of Kīlauea Volcano produced one of the largest and most destructive lava flows in Hawai’i during the past 200 years. Over the course of more than 3 months, twenty-four fissures erupted, and the rate of lava effusion varied by two orders of magnitude, with significant implications for evolving flow behavior and hazards. Syn-eruptive data were collected to quantify these changes in lava effusion rate, including video of flow through channels and digital elevation models acquired using small unoccupied aircraft systems, airborne lidar, and airborne single-pass interferometric synthetic aperture radar. Topographic data through time allowed calculation of subaerial lava flow volume and time-averaged discharge rate over the course of the eruption, which we integrated with pre- and post-eruption bathymetric surveys. Repeat videos of the near-vent channel were analyzed with particle velocimetry to extract flow velocities, and these were combined with open channel flow theory to calculate a time series of instantaneous effusion rates. Results show a general increase in dense rock equivalent (DRE) effusion rate from ~7 to ~100 m 3 /s from early to late May for the whole flow field and ≥ 200 m 3 /s by mid-June after the eruption had focused at a primary vent. By the end of the eruption in August, 0.9–1.4 km 3 DRE of lava had erupted, with 0.4 km 3 deposited on land and at least 0.5 km 3 offshore. The trends in effusion rate through time reflect magmatic processes in the connected summit and rift zone system that controlled eruption rate, with resulting implications for lava flow dynamics and hazards.

Hawaii↗
USGS2020

Volcanological applications of unoccupied aircraft systems (UAS): Developments, strategies, and future challenges

Unoccupied aircraft systems (UAS) are developing into fundamental tools for tackling the grand challenges in volcanology; here, we review the systems used and their diverse applications. UAS can typically provide image and topographic data at two orders of magnitude better spatial resolution than space-based remote sensing, and close-range observations at temporal resolutions down to those of video frame rates. Responsive deployments facilitate dense time-series measurements, unique opportunities for geophysical surveys, sample collection from hostile environments such as volcanic plumes and crater lakes, and emergency deployment of ground-based sensors (and robots) into hazardous regions. UAS have already been used to support hazard management and decision-makers during eruptive crises. As technologies advance, increased system capabilities, autonomy and availability, supported by more diverse and lighter-weight sensors, will offer unparalleled potential for hazard monitoring. UAS are expected to provide opportunities for pivotal advances in our understanding of complex physical and chemical volcanic processes.

Volcanica↗
USGS2019

Seismo-acoustic evidence for vent drying during shallow submarine eruptions at Bogoslof volcano, Alaska

Characterizing the state of the volcanic vent is key for interpreting observational datasets and accurately assessing volcanic hazards. This is particularly true for remote, complex eruptions such as the 2016–2017 Bogoslof volcano, Alaska eruption sequence. Bogoslof’s eruptions in this period were either shallow submarine or subaerial, or some combination of both. Our results demonstrate how low-frequency sound waves (infrasound), integrated with seismic and satellite data, can provide unique insight into shallow vent processes, otherwise not available. We use simple metrics, such as the infrasound frequency index (FI), event duration, and acoustic-seismic amplitude ratio, to look at changes in the elastic energy radiation and infer changes in seawater access to the vent. Satellite imagery before and after selected eruptions is used to ground-truth inferences on vent conditions. High FI and gradual increases in infrasound frequency content at Bogoslof correspond with transitions from submarine to subaerial vent conditions and a diminished or absent role of water, likely resulting in a drying out of the vent region. Event durations generally correlate with high FI and the range of FI values for each event, suggesting long duration events were more effective at drying out the vent region. A trend from low to high acoustic-seismic amplitude ratios for some long duration events also suggests an increase in acoustic efficiency as the vent dried out. We demonstrate that infrasound can serve as a robust indicator of seawater involvement for Bogoslof and other shallow submarine eruptions that may not be inferable from other datasets, particularly in near-real-time.

Alaska↗
USGS2019

The 2017-19 activity at Mount Agung in Bali (Indonesia): Intense unrest, monitoring, crisis response, evacuation, and eruption

After 53 years of quiescence, Mount Agung awoke in August 2017, with intense seismicity, measurable ground deformation, and thermal anomalies in the summit crater. Although the seismic unrest peaked in late September and early October, the volcano did not start erupting until 21 November. The most intense explosive eruptions with accompanying rapid lava effusion occurred between 25 and 29 November. Smaller infrequent explosions and extrusions continue through the present (June 2019). The delay between intense unrest and eruption caused considerable challenges to emergency responders, local and national governmental agencies, and the population of Bali near the volcano, including over 140,000 evacuees. This paper provides an overview of the volcanic activity at Mount Agung from the viewpoint of the volcano observatory and other scientists responding to the volcanic crisis. We discuss the volcanic activity as well as key data streams used to track it. We provide evidence that magma intruded into the mid-crust in early 2017, and again in August of that year, prior to intrusion of an inferred dike between Mount Agung and Batur Caldera that initiated an earthquake swarm in late September. We summarize efforts to forecast the behavior of the volcano, to quantify exclusion zones for evacuations, and to work with emergency responders and other government agencies to make decisions during a complex and tense volcanic crisis.

Scientific Reports↗
USGS2019

The 2018 rift eruption and summit collapse of Kilauea Volcano

In 2018, Kīlauea Volcano experienced its largest lower East Rift Zone (LERZ) eruption and caldera collapse in at least 200 years. After collapse of the Pu'u 'Ō'ō vent on 30 April, magma propagated downrift. Eruptive fissures opened in the LERZ on 3 May, eventually extending ~6.8 km. A 4 May earthquake (M6.9) produced ~5 m of fault slip. Lava erupted at rates exceeding 100 m3/s, eventually covering 35.5 km2. The summit magma system partially drained, producing minor explosions and near-daily collapses releasing energy equivalent to M4.7-M5.4 earthquakes. Activity declined rapidly on 4 August. Summit collapse and lava flow volume estimates are roughly equivalent--about 0.8 km3. Careful historical observation and monitoring of Kīlauea enabled successful forecasting of hazardous events.

Hawaii↗
USGS2019

Cyclic lava effusion during the 2018 eruption of Kīlauea Volcano

Lava flows present a recurring threat to communities on active volcanoes, and volumetric eruption rate is one of the primary factors controlling flow behavior and hazard. The timescales and driving forces of eruption rate variability, however, remain poorly understood. In 2018, a highly destructive eruption occurred on the lower flank of Kīlauea Volcano, Hawaiʻi, where the primary vent exhibited dramatic cyclic eruption rates on both short (minutes) and long (tens of hours) timescales. We use multiparameter data to show that the short cycles were driven by shallow outgassing, while longer cycles were pressure-driven surges in magma supply triggered by summit caldera collapse events 40 km upslope. The results provide a clear link between eruption rate fluctuations and their driving processes in the magmatic system.

Hawaii↗
USGS2018

2018 update to the U.S. Geological Survey national volcanic threat assessment

When erupting, all volcanoes pose a degree of risk to people and infrastructure, however, the risks are not equivalent from one volcano to another because of differences in eruptive style and geographic location. Assessing the relative threats posed by U.S. volcanoes identifies which volcanoes warrant the greatest risk-mitigation efforts by the U.S. Geological Survey and its partners. This update of the volcano threat assessment of Ewert and others (2005) considers new research in order to determine which volcanic systems should be added or removed from the list of potentially active volcanoes, updates the scoring of active volcanoes, and updates the 24-factor hazard and exposure matrix used to create the threat ranking. The threat assessment places volcanoes into five threat categories: very low, low, moderate, high, and very high. Within all five threat categories there are changes in relative rankings of volcanoes, and in a few cases, volcanoes moved between categories owing to changes in our understanding of their hazard, unrest, and exposure factors. Scorings of hazard factors were updated for some volcanoes where new research has identified Holocene eruptive activity or clarified our understanding of Holocene eruptive history and the occurrence of particular hazards such as tephra fall or pyroclastic density currents. The most numerous scoring changes made in the threat matrix since 2005 have been made among the hazard factors, particularly those accounting for observed eruptive activity or unrest. The very low threat category underwent the greatest amount of change, dropping from 32 to 21 volcanoes, owing to better knowledge of the eruptive histories of those volcanoes. The list of 18 very high threat volcanoes determined by Ewert and others (2005) remains the same; 11 of the 18 volcanoes are located in Washington, Oregon, or California, where explosive and often snow- and ice-covered edifices can project hazards long distances to densely populated and highly developed areas. Five of the 18 very high threat volcanoes are in Alaska near important population centers, economic infrastructure, or below busy air traffic corridors. The remaining two very high threat volcanoes are on the Island of Hawaiʻi, where densely populated and highly developed areas now exist on the flanks of highly active volcanoes. The high- and moderate-threat categories are dominated by Alaskan volcanoes. In these categories the generally more active and more explosive volcanoes in Alaska can have a substantial effect on national and international aviation, and large eruptions from any of the moderate- to very-high-threat volcanoes could cause regional or national-scale disasters. This revised threat assessment includes 18 very high threat, 39 high threat, 49 moderate threat, 34 low threat, and 21 very low threat volcanoes. The total of 161 volcanoes is a decrease of 8 from the total reported by Ewert and others (2005).

Scientific Investigations Report↗
USGS2018

Mass addition at Mount St. Helens, Washington, inferred from repeated gravity surveys

Measurements of subtle changes in the Earth’s gravityfield can provideinformation on the addition/loss of mass (e.g., magma or aqueousfluids) beneath a volcano. In this study, wemeasured gravity at Mount St. Helens from 2010 to 2016 to investigate possible mass changes followingthe 2004–2008 dome-forming eruption. The raw gravity measurements were corrected for changes in themass and shape of Crater Glacier and for deformation of the volcanic edifice to obtain residual gravity values.We found positive residual gravity changes that we interpret as evidence for partial recharge of the magmareservoir that fed the 2004–2008 eruption and/or for accumulation of groundwater in one or more shallowaquifers. Most of the gravity signal can be explained by groundwater accumulation; magma recharge is notrequired. However, there is additional evidence for at least partial recharge from seismic, deformation, andgeochemical observations

Washington↗
USGS2018

Geomorphic expression of rapid Holocene silicic magma reservoir growth beneath Laguna del Maule, Chile

Large rhyolitic volcanoes pose a hazard, yet the processes and signals foretelling an eruption are obscure. Satellite geodesy has revealed surface inflation signaling unrest within magma reservoirs underlying a few rhyolitic volcanoes. Although seismic, electrical, and potential field methods may illuminate the current configuration and state of these reservoirs, they cannot fully address the processes by which they grow and evolve on geologic time scales. We combine measurement of a deformed paleoshore surface, isotopic dating of volcanism and surface exposure, and modeling to determine the rate of growth of a rhyolite-producing magma reservoir. The numerical approach builds on a magma intrusion model developed to explain the current, decade-long, surface inflation at >20 cm/year. Assuming that the observed 62-m uplift reflects several non-eruptive intrusions of magma, each similar to the unrest over the past decade, we find that ~13 km 3 of magma recharged the reservoir at a depth of ~7 km during the Holocene, accompanied by the eruption of ~9 km 3 of rhyolite. The long-term rate of magma input is consistent with reservoir freezing and pluton formation. Yet, the unique set of observations considered here implies that large reservoirs can be incubated and grow at shallow depth via episodic high-flux magma injections. These replenishment episodes likely drive rapid inflation, destabilize cooling systems, propel rhyolitic eruptions, and thus should be carefully monitored.

Laguna del Maule↗
USGS2015

Variations in community exposure to lahar hazards from multiple volcanoes in Washington State (USA)

Understanding how communities are vulnerable to lahar hazards provides critical input for effective design and implementation of volcano hazard preparedness and mitigation strategies. Past vulnerability assessments have focused largely on hazards posed by a single volcano, even though communities and officials in many parts of the world must plan for and contend with hazards associated with multiple volcanoes. To better understand community vulnerability in regions with multiple volcanic threats, we characterize and compare variations in community exposure to lahar hazards associated with five active volcanoes in Washington State, USA—Mount Baker, Glacier Peak, Mount Rainier, Mount Adams and Mount St. Helens—each having the potential to generate catastrophic lahars that could strike communities tens of kilometers downstream. We use geospatial datasets that represent various population indicators (e.g., land cover, residents, employees, tourists) along with mapped lahar-hazard boundaries at each volcano to determine the distributions of populations within communities that occupy lahar-prone areas. We estimate that Washington lahar-hazard zones collectively contain 191,555 residents, 108,719 employees, 433 public venues that attract visitors, and 354 dependent-care facilities that house individuals that will need assistance to evacuate. We find that population exposure varies considerably across the State both in type (e.g., residential, tourist, employee) and distribution of people (e.g., urban to rural). We develop composite lahar-exposure indices to identify communities most at-risk and communities throughout the State who share common issues of vulnerability to lahar-hazards. We find that although lahars are a regional hazard that will impact communities in different ways there are commonalities in community exposure across multiple volcanoes. Results will aid emergency managers, local officials, and the public in educating at-risk populations and developing preparedness, mitigation, and recovery plans within and across communities.

Washington↗
USGS2013

The Chaitén rhyolite lava dome: Eruption sequence, lava dome volumes, rapid effusion rates and source of the rhyolite magma

We use geologic field mapping and sampling, photogrammetric analysis of oblique aerial photographs, and digital elevation models to document the 2008-2009 eruptive sequence at Chaitén Volcano and to estimate volumes and effusion rates for the lava dome. We also present geochemical and petrologic data that contribute to understanding the source of the rhyolite and its unusually rapid effusion rates. The eruption consisted of five major phases: 1. An explosive phase (1-11 May 2008); 2. A transitional phase (11-31 May 2008) in which low-altitude tephra columns and simultaneous lava extrusion took place; 3. An exogenous lava flow phase (June-September 2008); 4. A spine extrusion and endogenous growth phase (October 2008-February 2009); and 5. A mainly endogenous growth phase that began after the collapse of a prominent Peléean spine on 19 February 2009 and continued until the end of the eruption (late 2009 or possibly earliest 2010). The 2008-2009 rhyolite lava dome has a total volume of approximately 0.8 km3. The effusion rate averaged 66 m3s-1 during the first two weeks and averaged 45 m3s-1 for the first four months of the eruption, during which 0.5 km3 of rhyolite lava was erupted. These are among the highest rates measured world-wide for historical eruptions of silicic lava. Chaitén’s 2008-2009 lava is phenocryst-poor obsidian and microcrystalline rhyolite with 75.3±0.3% SiO2. The lava was erupted at relatively high temperature and is remarkably similar in composition and petrography to Chaitén’s pre-historic rhyolite. The rhyolite’s normative composition plots close to that of low pressure (100-200 MPa) minimum melts in the granite system, consistent with estimates of approximately 5 to 10 km source depths based on phase equilibria and geodetic studies. Calcic plagioclase, magnesian orthopyroxene and aluminous amphibole among the sparse phenocrysts suggest derivation of the rhyolite by melt extraction from a more mafic magmatic mush. High temperature and relatively low viscosity enabled rapid magma ascent and high effusion rates during the dome-forming phases of the 2008-2009 eruption.

Chaitén Volcano↗
USGS2013

Photogrammetric monitoring of lava dome growth during the 2009 eruption of Redoubt Volcano

The 2009 eruption of Redoubt Volcano, Alaska, began with a phreatic explosion on 15 March followed by a series of at least 19 explosive events and growth and destruction of at least two, and likely three, lava domes between 22 March and 4 April. On 4 April explosive activity gave way to continuous lava effusion within the summit crater. We present an analysis of post-4 April lava dome growth using an oblique photogrammetry approach that provides a safe, rapid, and accurate means of measuring dome growth. Photogrammetric analyses of oblique digital images acquired during helicopter observation flights and fixed-wing volcanic gas surveys produced a series of digital elevation models (DEMs) of the lava dome from 16 April to 23 September. The DEMs were used to calculate estimates of volume and time-averaged extrusion rates and to quantify morphological changes during dome growth. Effusion rates ranged from a maximum of 35 m 3 s − 1 during the initial two weeks to a low of 2.2 m 3 s − 1 in early summer 2009. The average effusion rate from April to July was 9.5 m 3 s − 1 . Early, rapid dome growth was characterized by extrusion of blocky lava that spread laterally within the summit crater. In mid-to-late April the volume of the dome had reached 36 × 10 6 m 3 , roughly half of the total volume, and dome growth within the summit crater began to be limited by confining crater walls to the south, east, and west. Once the dome reached the steep, north-sloping gorge that breaches the crater, growth decreased to the south, but the dome continued to inflate and extend northward down the gorge. Effusion slowed during 16 April–1 May, but in early May the rate increased again. This rate increase was accompanied by a transition to exogenous dome growth. From mid-May to July the effusion rate consistently declined. The decrease is consistent with observations of reduced seismicity, gas emission, and thermal anomalies, as well as declining rates of geodetic deflation or inflation. These trends suggest dome growth ceased by July 2009. The volume of the dome at the end of the 2009 eruption was about 72 × 10 6 m 3 , more than twice the estimated volume of the largest dome extruded during the 1989–1990 eruption. In total, the 2009 dome extends over 400 m down the glacial gorge on the north end of the crater, with a total length of 1 km, width of 500 m and an average thickness of 200 m.

Alaska↗
USGS2013

Emplacement of the final lava dome of the 2009 eruption of Redoubt Volcano, Alaska

After more than 8 months of precursory activity and over 20 explosions in 12 days, Redoubt Volcano, Alaska began to extrude the fourth and final lava dome of the 2009 eruption on April 4. By July 1 the dome had filled the pre-2009 summit crater and ceased to grow. By means of analysis and annotations of time-lapse webcam imagery, oblique-image photogrammetry techniques and capture and analysis of forward-looking infrared (FLIR) images, we tracked the volume, textural, effusive-style and temperature changes in near-real time over the entire growth period of the dome. The first month of growth (April 4–May 4) produced blocky intermediate- to high-silica andesite lava (59–62.3 wt.% SiO 2 ) that initially formed a round dome, expanding by endogenous growth, breaking the surface crust in radial fractures and annealing them with warmer, fresh lava. On or around May 1, more finely fragmented and scoriaceous andesite lava (59.8–62.2 wt.% SiO 2 ) began to appear at the top of the dome coincident with increased seismicity and gas emissions. The more scoriaceous lava spread radially over the dome surface, while the dome continued to expand from endogenous growth and blocky lava was exposed on the margins and south side of the dome. By mid-June the upper scoriaceous lava had covered 36% of the dome surface area. Vesicularity of the upper scoriaceous lava range from 55 to 66%, some of the highest vesicularity measurements recorded from a lava dome. We suggest that the stability of the final lava dome primarily resulted from sufficient fracturing and clearing of the conduit by preceding explosions that allowed efficient degassing of the magma during effusion. The dome was thus able to grow until it was large enough to exceed the magmastatic pressure in the chamber, effectively shutting off the eruption.

Alaska↗
USGS2011

Rapid, low-cost photogrammetry to monitor volcanic eruptions: An example from Mount St. Helens, Washington, USA

We describe a low-cost application of digital photogrammetry using commercially available photogrammetric software and oblique photographs taken with an off-the-shelf digital camera to create sequential digital elevation models (DEMs) of a lava dome that grew during the 2004–2008 eruption of Mount St. Helens (MSH) volcano. Renewed activity at MSH provided an opportunity to devise and test this method, because it could be validated against other observations of this well-monitored volcano. The datasets consist of oblique aerial photographs (snapshots) taken from a helicopter using a digital single-lens reflex camera. Twelve sets of overlapping digital images of the dome taken during 2004–2007 were used to produce DEMs and to calculate lava dome volumes and extrusion rates. Analyses of the digital images were carried out using photogrammetric software to produce three-dimensional coordinates of points identified in multiple photos. The evolving morphology of the dome was modeled by comparing successive DEMs. Results were validated by comparison to volume measurements derived from traditional vertical photogrammetric surveys by the US Geological Survey Cascades Volcano Observatory. Our technique was significantly less expensive and required less time than traditional vertical photogrammetric techniques; yet, it consistently yielded volume estimates within 5% of the traditional method. This technique provides an inexpensive, rapid assessment tool for tracking lava dome growth or other topographic changes at restless volcanoes.

Washington↗