SEARCH · Search USGS

Results for “GIS Development”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9Linked to original sources

USGS2005

Hydrostratigraphic modeling of a complex, glacial-drift aquifer system for importation into MODFLOW

Deposition from at least three episodes of glaciation left a complex glacial-drift aquifer system in central Illinois. The deepest and largest of these aquifers, the Sankoty-Mahomet Aquifer, occupies the lower part of a buried bedrock valley and supplies water to communities throughout central Illinois. Thin, discontinuous aquifers are present within glacial drift overlying the Sankoty-Mahomet Aquifer. This study was commissioned by local governments to identify possible areas where a regional water supply could be obtained from the aquifer with minimal adverse impacts on existing users. Geologic information from more than 2200 existing water well logs was supplemented with new data from 28 test borings, water level measurements in 430 wells, and 35 km of surface geophysical profiles. A three-dimensional (3-D) hydrostratigraphic model was developed using a contouring software package, a geographic information system (GIS), and the 3-D geologic modeling package, EarthVision??. The hydrostratigraphy of the glacial-drift sequence was depicted as seven uneven and discontinuous layers, which could be viewed from an infinite number of horizontal and vertical slices and as solid models of any layer. Several iterations were required before the 3-D model presented a reasonable depiction of the aquifer system. Layers from the resultant hydrostratigraphic model were imported into MODFLOW, where they were modified into continuous layers. This approach of developing a 3-D hydrostratigraphic model can be applied to other areas where complex aquifer systems are to be modeled and is also useful in helping lay audiences visualize aquifer systems.

Ground Water↗

USGS2006

Creation of GIS compatible, historic detailed soil data sets for the Collier and Miami-Dade Counties, Florida

When soils data are in digital format compatible with geographic information systems (GIS), a wide variety of analyses and display capabilities are afforded. Detailed information on soils that may be important to Everglades ecosystem restoration has been created in hardcopy form using traditional soils mapping techniques. However, accurate conversion of these analogue geographic data to GIS compatible information is a complicated process. Because detailed digital soils data for Southern Florida were not yet available from the US Department of Agriculture, the U.S. Geological Survey (USGS) Eastern Geographic Science Center (EGSC) developed a means for digitizing and attributing historic soil survey data for GIS analysis. This report documents that process and the two soil survey datasets created through it, one for Collier and one for Miami-Dade Counties in Florida. First, the sources for the soils data are described. Then the approach used to determine how data would be collected and organized is provided, followed by details of the spatial data collection and attribute data encoding.

Florida↗

USGS2019

Probability of streamflow permanence model (PROSPER): A spatially continuous model of annual streamflow permanence throughout the Pacific Northwest

The U.S. Geological Survey (USGS) has developed the PRObability of Streamflow PERmanence (PROSPER) model, a GIS raster-based empirical model that provides streamflow permanence probabilities (probabilistic predictions) of a stream channel having year-round flow for any unregulated and minimally-impaired stream channel in the Pacific Northwest region, U.S. The model provides annual predictions for 2004-2016 at a 30-m spatial resolution based on monthly or annually updated values of climatic conditions and static physiographic variables associated with the upstream basin. Predictions correspond to any pixel on the channel network consistent with the medium resolution National Hydrography Dataset channel network stream grid. Total annual precipitation and percent forest cover were consistently the most important predictor variables among global and most subregional models, which had error rates between 17 and 22%. Probabilities were converted to wet and dry streamflow permanence classes with an associated confidence. Wet and dry classifications were used to derive descriptors that characterize the statistical and spatial distribution of streamflow permanence in three focal basins. Predicted dry channel segments account for 52 to 92% of the stream network across the three focal basins; streamflow permanence decreased during climatically drier years. Predictions are publicly available through the USGS StreamStats platform. Results demonstrate the utility of the PROSPER model as a tool for identifying areas that may be resilient or sensitive to drought conditions, allowing for management efforts that target protecting critical reaches. Importantly, PROSPER’s successful predictive performance can be improved with new datasets of streamflow permanence underscoring the importance of field observations.

Idaho, Montana, Nevada, Oregon, Utah, Washington↗

USGS2013

Map design and production issues for the Utah Gap Analysis Project

The cartographic preparation and printing of four maps for the Utah GAP Project presented a wide range of challenges in cartographic design and production. In meeting these challenges, the map designers had to balance the purpose of the maps together with their legibility and utility against both the researchers' desire to show as much detail as possible and the technical limitations inherent in the printing process. This article describes seven design and production issues in order to illustrate the challenges of making maps from a merger of satellite data and GIS databases, and to point toward future investigation and development.

Utah↗

USGS2000

Summary of precipitation data for the Black Hills area of South Dakota, water years 1931-98

Long-term precipitation records are sum-marized for the Black Hills area of South Dakota. Precipitation data are available for numerous gaging locations; however, few gages have continuous, long-term records, and periods of missing record are common. Thus, a geographic information system (GIS) utilizing an inverse-distance weighting method was developed to generate spatial precipitation distributions from point precipitation data for the Black Hills area, based on available monthly records. The spatial distributions were used to estimate periods of missing record for all 94 gages considered. The resulting monthly records of measured and estimated precipitation are tabulated for water years 1931-98. Average values for water years 1961-90, which is the period used for calculation of climatic normals, were used to develop an isohyetal map of normal annual precipitation for the Black Hills area. Temporal trends in precipitation for the Black Hills area also were examined. Sustained periods of deficit precipitation occurred during 1931-40 and 1948-61. Sustained periods of surplus precipitation occurred during 1941-47, 1962-68, and 1991-98, with the late 1990's identified as the wettest period since 1931. The driest 30-year period was 1931-60, when annual precipitation averaged 17.17 inches for the study area. The wettest 30-year period was 1969-98, when annual precipitation averaged 19.61 inches. Normal annual precipitation (1961-90) for the study area is 19.06 inches, compared with the long-term (1931-98) annual average of 18.61 inches. Annual extremes for the study area have ranged from 10.22 inches in water year 1936 to 27.39 inches in water year 1995.

Open-File Report↗

USGS2008

Modeling landslide recurrence in Seattle, Washington, USA

To manage the hazard associated with shallow landslides, decision makers need an understanding of where and when landslides may occur. A variety of approaches have been used to estimate the hazard from shallow, rainfall-triggered landslides, such as empirical rainfall threshold methods or probabilistic methods based on historical records. The wide availability of Geographic Information Systems (GIS) and digital topographic data has led to the development of analytic methods for landslide hazard estimation that couple steady-state hydrological models with slope stability calculations. Because these methods typically neglect the transient effects of infiltration on slope stability, results cannot be linked with historical or forecasted rainfall sequences. Estimates of the frequency of conditions likely to cause landslides are critical for quantitative risk and hazard assessments. We present results to demonstrate how a transient infiltration model coupled with an infinite slope stability calculation may be used to assess shallow landslide frequency in the City of Seattle, Washington, USA. A module called CRF (Critical RainFall) for estimating deterministic rainfall thresholds has been integrated in the TRIGRS (Transient Rainfall Infiltration and Grid-based Slope-Stability) model that combines a transient, one-dimensional analytic solution for pore-pressure response to rainfall infiltration with an infinite slope stability calculation. Input data for the extended model include topographic slope, colluvial thickness, initial water-table depth, material properties, and rainfall durations. This approach is combined with a statistical treatment of rainfall using a GEV (General Extreme Value) probabilistic distribution to produce maps showing the shallow landslide recurrence induced, on a spatially distributed basis, as a function of rainfall duration and hillslope characteristics.

Washington↗

USGS1996

A spatial decision support system for coastal management: A research project at the National Wetlands Research Center of the U.S. Geological Survey

Environmental resource managers and scientists are being challenged in developing strategies to manage complex coastal systems. From an ecological perspective, there are myriad dynamic, interrelated natural and human-induced processes that affect the health and stability of coastal systems. However, the problems associated with managing coastal resources usually transcend purely ecological factors when one considers societal needs and expectations from these resources. For example, at least nine Federal, State, and local government agencies, often with widely varying responsibilities or interests, are charged with managing environmental resources and/or regulating human activities within Louisiana's coastal systems; that number may be higher in other coastal areas of the United States. In many coastal systems, a declining resource base and environmental quality combined with an expanding human population exert increased demands on those systems. This results in a number of conflicting resource management and environmental impact assessment issues. The issues include determining the most cost-effective strategies for restoring degraded natural systems, local and regional planning for future urban and commercial development in or near sensitive coastal habitats, predicting impacts from acute and chronic pollutant discharges (oil spills, fecal coliform contamination) as well as from natural hazard damages to coastal systems, and optimal partitioning of coastal resources among competing user groups (e.g., commercial and recreational fishermen). Solving such complex environmental resource management problems often involves a multidisciplinary approach, requires computerized analytical modeling abilities to manipulate large quantities of spatial-temporal data according to a defined set of objectives or constraints, and needs a mechanism to provide quick responses for dynamic resource and environmental issues. For this, a GIS-based multifunctional Spatial Decision Support System (SDSS) is being developed at the National Wetlands Research Center of the U.S. Geological Survey (formerly the Southern Science Center of the US. Fish and Wildlife Service/National Biological Service).

Louisiana↗

USGS2000

Estimating forest crown area removed by selection cutting: a linked regression-GIS approach based on stump diameters

The purpose of this research was to develop a model that could be used to provide a spatial representation of uneven-aged silvicultural treatments on forest crown area. We began by developing species-specific linear regression equations relating tree DBH to crown area for eight bottomland tree species at White River National Wildlife Refuge, Arkansas, USA. The relationships were highly significant for all species, with coefficients of determination (r(2)) ranging from 0.37 for Ulmus crassifolia to nearly 0.80 for Quercus nuttalliii and Taxodium distichum. We next located and measured the diameters of more than 4000 stumps from a single tree-group selection timber harvest. Stump locations were recorded with respect to an established gl id point system and entered into a Geographic Information System (ARC/INFO). The area occupied by the crown of each logged individual was then estimated by using the stump dimensions (adjusted to DBHs) and the regression equations relating tree DBH to crown area. Our model projected that the selection cuts removed roughly 300 m(2) of basal area from the logged sites resulting in the loss of approximate to 55 000 m(2) of crown area. The model developed in this research represents a tool that can be used in conjunction with remote sensing applications to assist in forest inventory and management, as well as to estimate the impacts of selective timber harvest on wildlife.

Forest Ecology and Management↗

USGS2011

A working environment for digital planetary data processing and mapping using ISIS and GRASS GIS

Since the beginning of planetary exploration, mapping has been fundamental to summarize observations returned by scientific missions. Sensor-based mapping has been used to highlight specific features from the planetary surfaces by means of processing. Interpretative mapping makes use of instrumental observations to produce thematic maps that summarize observations of actual data into a specific theme. Geologic maps, for example, are thematic interpretative maps that focus on the representation of materials and processes and their relative timing. The advancements in technology of the last 30 years have allowed us to develop specialized systems where the mapping process can be made entirely in the digital domain. The spread of networked computers on a global scale allowed the rapid propagation of software and digital data such that every researcher can now access digital mapping facilities on his desktop. The efforts to maintain planetary missions data accessible to the scientific community have led to the creation of standardized digital archives that facilitate the access to different datasets by software capable of processing these data from the raw level to the map projected one. Geographic Information Systems (GIS) have been developed to optimize the storage, the analysis, and the retrieval of spatially referenced Earth based environmental geodata; since the last decade these computer programs have become popular among the planetary science community, and recent mission data start to be distributed in formats compatible with these systems. Among all the systems developed for the analysis of planetary and spatially referenced data, we have created a working environment combining two software suites that have similar characteristics in their modular design, their development history, their policy of distribution and their support system. The first, the Integrated Software for Imagers and Spectrometers (ISIS) developed by the United States Geological Survey, represents the state of the art for processing planetary remote sensing data, from the raw unprocessed state to the map projected product. The second, the Geographic Resources Analysis Support System (GRASS) is a Geographic Information System developed by an international team of developers, and one of the core projects promoted by the Open Source Geospatial Foundation (OSGeo). We have worked on enabling the combined use of these software systems throughout the set-up of a common user interface, the unification of the cartographic reference system nomenclature and the minimization of data conversion. Both software packages are distributed with free open source licenses, as well as the source code, scripts and configuration files hereafter presented. In this paper we describe our work done to merge these working environments into a common one, where the user benefits from functionalities of both systems without the need to switch or transfer data from one software suite to the other one. Thereafter we provide an example of its usage in the handling of planetary data and the crafting of a digital geologic map. ?? 2010 Elsevier Ltd. All rights reserved.

Conference Paper↗

USGS2007

A Geographic Information System procedure to quantify drainage-basin characteristics

The Basin Characteristics System (BCS) has been developed to quantify characteristics of a drainage basin. The first of four main BCS processing steps creates four geographic information system (GIS) digital maps representing the drainage divide, the drainage network, elevation contours, and the basin length. The drainage divide and basin length are manually digitized from 1:250,000-scale topographic maps. The drainage network is extracted using GIS software from 1:100,000-scale digital line graph data. The elevation contours are generated using GIS software from 1:250,000-scale digital elevation model data. The second and third steps use software developed to assign attributes to specific features in three of the four digital maps and analyze the four maps to quantify 24 morphometric basin characteristics. The fourth step quantifies two climatic characteristics from digitized State maps of precipitation data. Compared to manual methods of measurement, the BCS provides a reduction in the time required to quantify the 26 basin characteristics. Comparison tests indicate the BCS measurements are not significantly different from manual topographic-map measurements for 11 of 12 primary drainage-basin characteristics. Tests indicate the BCS significantly underestimates basin slope. Comparison-measurement differences for basin slope, main channel slope, and basin relief appear to be due to limitations in the digital elevation model data.

Conference Paper↗

USGS2024

Geothermal Play Fairway Analysis, Part 2: GIS methodology

Play Fairway Analysis (PFA) in geothermal exploration originates from a systematic methodology developed within the petroleum industry and is based on a geologic, geophysical, and hydrologic framework of identified geothermal systems. We tailored this methodology to study the geothermal resource potential of the Snake River Plain and surrounding region, but it can be adapted to other geothermal resource settings. We adapted the PFA approach to geothermal resource exploration by cataloging the critical elements controlling exploitable hydrothermal systems, establishing risk matrices that evaluate these elements in terms of both probability of success and level of knowledge, and building a code-based ‘processing model’ to process results.

Geothermics↗

USGS2015

Avian Influenza spread and transmission dynamics

The spread of highly pathogenic avian influenza (HPAI) viruses of type A of subtype H5N1 has been a serious threat to global public health. Understanding the roles of various (migratory, wild, poultry) bird species in the transmission of these viruses is critical for designing and implementing effective control and intervention measures. Developing appropriate models and mathematical techniques to understand these roles and to evaluate the effectiveness of mitigation strategies have been a challenge. Recent development of the global health surveillance (especially satellite tracking and GIS techniques) and the mathematical theory of dynamical systems combined have gradually shown the promise of some cutting-edge methodologies and techniques in mathematical biology to meet this challenge.

Book chapter↗

USGS2021

Grassland live fractional cover map creation and Geographic Information System (GIS) analysis for rangeland management supporting Kenya Northern Rangelands Trust Conservancies

The handbooks and synchronized MP4 recordings provide hands-on instruction for creating and analyzing vegetation live fractional cover (LFC) maps. The methods and protocols used in the instruction materials follow those developed and recorded in Rangoonwala and Ramsey (2019). The LFC mapping and geographic information system (GIS) analyses highlight the consortium of rangeland conservancies covering the semiarid central region of Kenya (approximately 44,000 square kilometers). The instruction materials are separated into two parts: processing and map-product creation based on remote-sensing images and GIS analyses of the created maps for rangeland management. The image processing is conducted using the advanced and professional software package SeNtinels Application Platform (SNAP) that is supported and maintained by the European Space Agency. SNAP is a free image analyses software package available for download. It is largely icon driven but offers simple to advanced program inserts and batch processing. The GIS analyses are conducted using the software package Quantum Geographic Information System (QGIS), another free and downloadable software. QGIS is compatible with numerous software, including the Esri suite of ArcGIS software and database structure. The image data includes both high-spatial-resolution Sentinel-2 optical data and Sentinel-1 synthetic aperture radar (SAR). Both datasets are freely available via a public portal that is maintained by the European Space Agency. The image-processing instruction handbook covers all aspects of acquiring and processing satellite-image data and importing vector-data sources into SNAP. The GIS analysis handbook covers final creation of map products from the maps created in SNAP and creation of GIS procedures in QGIS that are needed to manage the rangeland resources for wildlife and pastoral grazing. Although focused on the Kenyan conservancies and their semiarid environment, the processing methods and procedures are applicable for similar environments and management, and to a large part, even for integrated mapping and GIS functionality of any managed landscape resource. The instruction handbooks are synchronized to MP4 training videos created with U.S. Geological Survey-licensed Camtasia 9 software. The workbook and MP4 video combinations are suitable for a single user or a workshop setting.

Open-File Report↗

USGS2005

Karst database development in Minnesota: Design and data assembly

The Karst Feature Database (KFD) of Minnesota is a relational GIS-based Database Management System (DBMS). Previous karst feature datasets used inconsistent attributes to describe karst features in different areas of Minnesota. Existing metadata were modified and standardized to represent a comprehensive metadata for all the karst features in Minnesota. Microsoft Access 2000 and ArcView 3.2 were used to develop this working database. Existing county and sub-county karst feature datasets have been assembled into the KFD, which is capable of visualizing and analyzing the entire data set. By November 17 2002, 11,682 karst features were stored in the KFD of Minnesota. Data tables are stored in a Microsoft Access 2000 DBMS and linked to corresponding ArcView applications. The current KFD of Minnesota has been moved from a Windows NT server to a Windows 2000 Citrix server accessible to researchers and planners through networked interfaces. ?? Springer-Verlag 2005.

Environmental Geology↗

USGS2023

Georectified polygon database of ground-mounted large-scale solar photovoltaic sites in the United States

Over 4,400 large-scale solar photovoltaic (LSPV) facilities operate in the United States as of December 2021, representing more than 60 gigawatts of electric energy capacity. Of these, over 3,900 are ground-mounted LSPV facilities with capacities of 1 MWdc or more. Ground mounted LSPV installations continue increasing, with more than 400 projects appearing online in 2021 alone; however, a comprehensive, publicly available georectified dataset including spatial footprints of these facilities is lacking. Analysts from U.S. Over 4,400 large-scale solar photovoltaic (LSPV) facilities operate in the United States as of December 2021, representing more than 60 gigawatts of electric energy capacity. Of these, over 3,900 are ground-mounted LSPV facilities with capacities of 1 megawatt direct current (MW dc ) or more. Ground-mounted LSPV installations continue increasing, with more than 400 projects appearing online in 2021 alone; however, a comprehensive, publicly available georectified dataset including spatial footprints of these facilities is lacking. The United States Large-Scale Solar Photovoltaic Database (USPVDB) was developed to fill this gap. Using US Energy Information Administration (EIA) data, locations of 3,699 LSPV facilities were verified using high-resolution aerial imagery, polygons were digitized around panel arrays, and attributes were appended. Quality assurance and control were achieved via team peer review and comparison to other US PV datasets. Data are publicly available via an interactive web application and multiple downloadable formats, including: comma-separated value (CSV), application programming interface (API), and GIS shapefile and GeoJSON. Survey and Lawrence Berkeley National Laboratory collaborated to develop the United States Large-Scale Solar Photovoltaic Database (USPVDB). Using Energy Information Administration (EIA) data, locations of LSPV facilities were verified using high-resolution aerial imagery, polygons were digitized around panel arrays, and attributes were appended. Quality assurance and control were achieved via team peer review and comparison to other US PV datasets. Data are publicly available in an interactive web application, and a number of downloadable formats, including: comma-separated value spreadsheet (CSV), application programming interface (API), and GIS shapefile.

Scientific Data↗

USGS2004

Vulnerability of port and harbor communities to earthquake and tsunami hazards: The use of GIS in community hazard planning

Abstract Earthquakes and tsunamis pose significant threats to Pacific Northwest coastal port and harbor communities. Developing holistic mitigation and preparedness strategies to reduce the potential for loss of life and property damage requires community-wide vulnerability assessments that transcend traditional site-specific analyses. The ability of a geographic information system (GIS) to integrate natural, socioeconomic, and hazards information makes it an ideal assessment tool to support community hazard planning efforts. This article summarizes how GIS was used to assess the vulnerability of an Oregon port and harbor community to earthquake and tsunami hazards, as part of a larger risk-reduction planning initiative. The primary purposes of the GIS were to highlight community vulnerability issues and to identify areas that both are susceptible to hazards and contain valued port and harbor community resources. Results of the GIS analyses can help decision makers with limited mitigation resources set priorities for increasing community resiliency to natural hazards.

Coastal Management↗

USGS1999

Digital mapping techniques '99 -- workshop proceedings

The Digital Mapping Techniques '99 (DMT'99) workshop was attended by 91 technical experts from 42 agencies, universities, and private companies, including representatives from 30 state geological surveys (see Appendix A ). This workshop was similar in nature to the first two meetings, held in June, 1997, in Lawrence, Kansas (Soller, 1997), and in May, 1998, in Champaign, Illinois (Soller, 1998a). This year's meeting was hosted by the Wisconsin Geological and Natural History Survey, from May 19 to 22, 1999, on the University of Wisconsin campus in Madison. As in the previous meetings, the objective was to foster informal discussion and exchange of technical information. When, based on discussions at the workshop, an attendee adopts or modifies a newly learned technique, the workshop clearly has met that objective. Evidence of learning and cooperation among participating agencies continued to be a highlight of the DMT workshops (see example in Soller, 1998b, and various papers in this volume). The meeting's general goal was to help move the state geological surveys and the USGS toward development of more cost-effective, flexible, and useful systems for digital mapping and geographic information systems (GIS) analysis. Through oral and poster presentations and special discussion sessions, emphasis was given to: 1) methods for creating and publishing map products (here, ìpublishingî includes Web-based release); 2) continued development of the National Geologic Map Database; and 3) progress toward building a standard geologic map data model. Especially to support the interest in map preparation and publication, five representatives of the GIS hardware and software vendor community were invited to participate. The three annual DMT workshops were coordinated by the AASG/USGS Data Capture Working Group, which was formed in August, 1996, to support the Association of American State Geologists and the USGS in their effort to build a National Geologic Map Database (see Soller and Berg, this volume, and http://ncgmp.usgs.gov/ngmdbproject/standards/datacapt/datacaptureWG.html ). The Working Group was formed because increased production efficiencies, standardization, and quality of digital map products were needed to help the Database, and the State and Federal geological surveys, provide more high-quality digital maps to the public.

Open-File Report↗

USGS1998

Geospatial Technology Applications and Infrastructure in the Biological Resources Division

Executive Summary -- Automated spatial processing technology such as geographic information systems (GIS), telemetry, and satellite-based remote sensing are some of the more recent developments in the long history of geographic inquiry. For millennia, humankind has endeavored to map the Earth's surface and identify spatial relationships. But the precision with which we can locate geographic features has increased exponentially with satellite positioning systems. Remote sensing, GIS, thematic mapping, telemetry, and satellite positioning systems such as the Global Positioning System (GPS) are tools that greatly enhance the quality and rapidity of analysis of biological resources. These technologies allow researchers, planners, and managers to more quickly and accurately determine appropriate strategies and actions. Researchers and managers can view information from new and varying perspectives using GIS and remote sensing, and GPS receivers allow the researcher or manager to identify the exact location of interest. These geospatial technologies support the mission of the U.S. Geological Survey (USGS) Biological Resources Division (BRD) and the Strategic Science Plan (BRD 1996) by providing a cost-effective and efficient method for collection, analysis, and display of information. The BRD mission is 'to work with others to provide the scientific understanding and technologies needed to support the sound management and conservation of our Nation's biological resources.' A major responsibility of the BRD is to develop and employ advanced technologies needed to synthesize, analyze, and disseminate biological and ecological information. As the Strategic Science Plan (BRD 1996) states, 'fulfilling this mission depends on effectively balancing the immediate need for information to guide management of biological resources with the need for technical assistance and long-range, strategic information to understand and predict emerging patterns and trends in ecological systems.' Information sharing plays a key role in nearly everything BRD does. The Strategic Science Plan discusses the need to (1) develop tools and standards for information transfer, (2) disseminate information, and (3) facilitate effective use of information. This effort centers around the National Biological Information Infrastructure (NBII) and the National Spatial Data Infrastructure (NSDI), components of the National Information Infrastructure. The NBII and NSDI are distributed electronic networks of biological and geographical data and information, as well as tools to help users around the world easily find and retrieve the biological and geographical data and information they need. The BRD is responsible for developing scientifically and statistically reliable methods and protocols to assess the status and trends of the Nation's biological resources. Scientists also conduct important inventory and monitoring studies to maintain baseline information on these same resources. Research on those species for which the Department of the Interior (DOI) has trust responsibilities (including endangered species and migratory species) involves laboratory and field studies of individual animals and the environments in which they live. Researchboth tactical and strategicis conducted at the BRD's 17 science centers and 81 field stations, 54 Cooperative Fish and Wildlife Research Units in 40 states, and at 11 former Cooperative Park Study Units. Studies encompass fish, birds, mammals, and plants, as well as their ecosystems and the surrounding landscape. Biological Resources Division researchers use a variety of scientific tools in their endeavors to understand the causes of biological and ecological trends. Research results are used by managers to predict environmental changes and to help them take appropriate measures to manage resources effectively. The BRD Geospatial Technology Program facilitates the collection, analysis, and dissemination of data and informat

Information and Technology Report↗