Search USGS⌕ Search
Home/Archive/USGS

USGS · sim2988

Net-infiltration map of the Navajo Sandstone outcrop area in western Washington County, Utah

Victor M. Heilweil·Tim S. McKinney
View original source ↗Read source document ↗Export metadata ↓

Abstract

As populations grow in the arid southwestern United States and desert bedrock aquifers are increasingly targeted for future development, understanding and quantifying the spatial variability of net infiltration and recharge becomes critically important for inventorying groundwater resources and mapping contamination vulnerability. A Geographic Information System (GIS)-based model utilizing readily available soils, topographic, precipitation, and outcrop data has been developed for predicting net infiltration to exposed and soil-covered areas of the Navajo Sandstone outcrop of southwestern Utah. The Navajo Sandstone is an important regional bedrock aquifer. The GIS model determines the net-infiltration percentage of precipitation by using an empirical equation. This relation is derived from least squares linear regression between three surficial parameters (soil coarseness, topographic slope, and downgradient distance from outcrop) and the percentage of estimated net infiltration based on environmental tracer data from excavations and boreholes at Sand Hollow Reservoir in the southeastern part of the study area. Processed GIS raster layers are applied as parameters in the empirical equation for determining net infiltration for soil-covered areas as a percentage of precipitation. This net-infiltration percentage is multiplied by average annual Parameter-elevation Regressions on Independent Slopes Model (PRISM) precipitation data to obtain an infiltration rate for each model cell. Additionally, net infiltration on exposed outcrop areas is set to 10 percent of precipitation on the basis of borehole net-infiltration estimates. Soils and outcrop net-infiltration rates are merged to form a final map. Areas of low, medium, and high potential for ground-water recharge have been identified, and estimates of net infiltration range from 0.1 to 66 millimeters per year (mm/yr). Estimated net-infiltration rates of less than 10 mm/yr are considered low, rates of 10 to 50 mm/yr are considered medium, and rates of more than 50 mm/yr are considered high. A comparison of estimated net-infiltration rates (determined from tritium data) to predicted rates (determined from GIS methods) at 12 sites in Sand Hollow and at Anderson Junction indicates an average difference of about 50 percent. Two of the predicted values were lower, five were higher, and five were within the estimated range. While such uncertainty is relatively small compared with the three order-of-magnitude range in predicted net-infiltration rates, the net-infiltration map is best suited for evaluating relative spatial distribution rather than for precise quantification of recharge to the Navajo aquifer at specific locations. An important potential use for this map is land-use zoning for protecting high net-infiltration parts of the aquifer from potential surface contamination.

Explore related subjects

Scientific Investigations MapReport
90° N90° S · 180° W ← longitude → 180° E
Source-reported bounding extent: 37.0275° to 37.36667° latitude; -113.875° to -113.2939° longitude. This indicates report coverage, not an exact sampling location. View area on OpenStreetMap.

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Victor M. Heilweil, Tim S. McKinney. 2007. Net-infiltration map of the Navajo Sandstone outcrop area in western Washington County, Utah. https://doi.org/10.3133/sim2988

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

USGS2026

Altitude of the potentiometric surface and depth to water in the Mississippi River Valley alluvial aquifer, spring 2024

Potentiometric-surface and depth-to-water maps for spring 2024 were created for the Mississippi River Valley alluvial aquifer using groundwater-altitude data from 1,151 wells completed in the Mississippi River Valley alluvial aquifer and from the altitude of the top of the water surface in area rivers from 160 U.S. Geological Survey and U.S. Army Corps of Engineers streamgages. The potentiometric-surface and depth-to-water maps for 2024 were created to support investigations to characterize the Mississippi River Valley alluvial aquifer as part of the U.S. Geological Survey Water Availability and Use Science Program. Sufficient data were available to map the potentiometric surface and depth to water of the Mississippi River Valley alluvial aquifer for spring 2024 for about 83 percent of the aquifer area. The potentiometric contours ranged from 0 to 330 feet (ft) above the North American Vertical Datum of 1988. The regional direction of the groundwater gradient was generally to the south-southwest, except in areas of groundwater-altitude depressions, where the groundwater gradient direction was into the depression, and near rivers, where the groundwater gradient direction was either from the aquifer to the river or from the river into the aquifer. Groundwater depressions in the potentiometric-surface map are in the lower one-half of the Cache region and in most of the Grand Prairie and Delta regions. Depth to water by well in the Mississippi River Valley alluvial aquifer in spring 2024 ranged from 0.27 ft above land surface to 145.65 ft below land surface.

Arkansas, Illinois, Kentucky, Louisiana, Mississip↗
USGS2026

Color-Shaded Relief Bathymetry of Lake Chelan, Washington

In 2023, the U.S. Geological Survey (USGS) completed a 3-week field operation in Lake Chelan, Washington, the third deepest lake in the conterminous United States, to acquire sediment cores, high-resolution bathymetry data, and chirp sub-bottom profiles. The high-resolution bathymetry displayed in this map publication was collected using a Norbit Winghead i67-curved array multibeam system; raw data were cleaned and gridded (3 by 3 meters [m]) in the Teledyne CARIS software. In some locations where the slopes of Lake Chelan are near-vertical, multibeam returns were sparse, resulting in artifacts resembling holes that appear as grey dots within the color-shaded bathymetric relief. Although the 2023 bathymetric mapping of Lake Chelan resulted in similar morphometric characteristics to previous hydrographic campaigns (table 1; Kendra and Singleton, 1987; Pelletier and others, 1989), these new data provide a much more detailed understanding of the two physiographic basins that comprise Lake Chelan: the deeper (as deep as 445.8 m [fig. 1]; previously reported as 453 m) and narrower (1–2 kilometers [km] wide) Lucerne Basin to the north, and the shallower (as deep as 127.8 m [fig. 1]), and wider (2–3 km wide) Wapato Basin to the south. With this detailed imaging of Lake Chelan, we find pervasive morphological evidence of slope failure and mass-transport deposits (MTDs) in at least 89 locations within the lake and 63 subaqueous deltas (fig. 2). The deeper Lucerne Basin is dominated by steep slopes and numerous subaqueous deltas fed by steep fluvial catchments, whereas the Wapato Basin contains numerous landslide scarps, scars, and debris aprons along the more gently sloping lake margins, and abundant relict kettle structures from the Pleistocene deglaciation. Lake Chelan’s geomorphic, geophysical, and sediment data contain important records of glacial retreat and advance, regional volcanic eruptions, and earthquakes that generate ground motions severe enough to induce landslides recorded in the sediment as MTDs. The epicenter of the 1872 Washington State Earthquake (M 6.5–7.2; Bakun and others, 2002; Brocher and others, 2017; Sherrod and others, 2021) is along the Spencer Canyon Fault, near the southern end of Lake Chelan. Shaking from this earthquake was strong enough to affect local aquifers, induce liquefaction of unconsolidated sediments, produce large seiches (Brocher and others, 2018), and likely cause landslides within Lake Chelan.

Washington↗