SEARCH · Search USGS

Results for “Rocks & Minerals”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,369 records · Page 76Linked to original sources

USGS2007

Insight into the geology of the East Antarctic hinterland: a study of sediment inclusions from ice cores of the Lake Vostok borehole

The borehole at the southern part of subglacial Lake Vostok has been drilled into an ice layer that has been refrozen from the lake water. This ice layer contains random sediment inclusions, eight of which have been studied using state-of the-art analytical techniques. Six inclusions comprise soft aggregates consisting mainly of clay-mica minerals and micron-sized quartz grains while two others are solid clasts of fine-grained cemented rocks. The largest rock clast consists of poorly-rounded quartz and minor amounts of accessory minerals and is classified as quartzose siltstone. More than twenty grains of zircon and monazite have been identified in this siltstone and dated by SIMS SHRIMP-II. Two age clusters have been recognized for these detrital grains, in the ranges 0.8−1.2 Ga and 1.6−1.8 Ga. The compositions of the rock clasts suggest that the bedrock situated to the west of Lake Vostok is sedimentary. The age data on the detrital accessory minerals suggest that the provenance of these sedimentary rocks − the Gamburtsev Mountains and Vostok Subglacial Highlands, is mainly represented by Paleoproterozoic and MesoproterozoicNeoproterozoic crustal provinces

Open-File Report↗

USGS1967

Sierra Nevada batholith

The Sierra Nevada batholith is localized in the axial region of a complex faulted synclinorium that coincides with a downfold in the Mohorovicic discontinuity and in P-wave velocity boundaries within the crust. Observed P-wave velocities are compatible with downward increase in the proportion of diorite, quartz diorite, and calcic granodiorite relative to quartz monzonite and granite in the upper crust, with amphibolite or gabbro-basalt in the lower crust, and with periodotite in the upper mantle. The synclinorium was formed in Paleozoic and Mesozoic strata during early and middle Mesozoic time in a geosyncline marginal to the continent. Granitic magmas are believed to have formed in the lower half of the crust at depths of 25 to 45 kilometers or more, primarily as a result of high radiogenic heat production in the thickened prism of crustal rocks. Magma was generated at different times in different places as the locus of downfolding shifted. It rose into the upper crust because it was less dense than rock of the same composition or residual refractory rocks. Refractory rocks and crystals that were not melted and early crystallized mafic minerals that settled from the rising magma thickened the lower crust. Wall and roof rocks settled around, and perhaps through, the rising magma and provided space for its continued rise. Erosion followed each magmatic episode, and 10 to 12 kilometers of rock may have been eroded away since the Jurassic and 7 to 10 kilometers since the early Late Cretaceous.

California↗

USGS2006

Geochemical Characterization of Mine Waste, Mine Drainage, and Stream Sediments at the Pike Hill Copper Mine Superfund Site, Orange County, Vermont

The Pike Hill Copper Mine Superfund Site in the Vermont copper belt consists of the abandoned Smith, Eureka, and Union mines, all of which exploited Besshi-type massive sulfide deposits. The site was listed on the U.S. Environmental Protection Agency (USEPA) National Priorities List in 2004 due to aquatic ecosystem impacts. This study was intended to be a precursor to a formal remedial investigation by the USEPA, and it focused on the characterization of mine waste, mine drainage, and stream sediments. A related study investigated the effects of the mine drainage on downstream surface waters. The potential for mine waste and drainage to have an adverse impact on aquatic ecosystems, on drinking- water supplies, and to human health was assessed on the basis of mineralogy, chemical concentrations, acid generation, and potential for metals to be leached from mine waste and soils. The results were compared to those from analyses of other Vermont copper belt Superfund sites, the Elizabeth Mine and Ely Copper Mine, to evaluate if the waste material at the Pike Hill Copper Mine was sufficiently similar to that of the other mine sites that USEPA can streamline the evaluation of remediation technologies. Mine-waste samples consisted of oxidized and unoxidized sulfidic ore and waste rock, and flotation-mill tailings. These samples contained as much as 16 weight percent sulfides that included chalcopyrite, pyrite, pyrrhotite, and sphalerite. During oxidation, sulfides weather and may release potentially toxic trace elements and may produce acid. In addition, soluble efflorescent sulfate salts were identified at the mines; during rain events, the dissolution of these salts contributes acid and metals to receiving waters. Mine waste contained concentrations of cadmium, copper, and iron that exceeded USEPA Preliminary Remediation Goals. The concentrations of selenium in mine waste were higher than the average composition of eastern United States soils. Most mine waste was potentially acid generating because of paste-pH values of less than 4 and negative net-neutralization potentials (NNP). The processed flotation-mill tailings, however, had a near neutral paste pH, positive NNP, and a few weight percent calcite. Leachate tests indicated that elements and compounds such as Al, Cd, Cu, Fe, Mn, Se, SO4, and Zn were leached from mine waste in concentrations that exceeded aquatic ecosystem and drinking-water standards. Mine waste from the Pike Hill mines was chemically and mineralogically similar to that from the Elizabeth and Ely mines. In addition, metals were leached and acid was produced from mine waste from the Pike Hill mines in comparable concentrations to those from the Elizabeth and Ely mines, although the host rock of the Pike Hill deposits contains significant amounts of carbonate minerals and, thus, a greater acid-neutralizing capacity when compared to the host rocks of the Elizabeth and Ely deposits. Water samples collected from unimpacted parts of the Waits River watershed generally contained lower amounts of metals compared to water samples from mine drainage, were alkaline, and had a neutral pH, which was likely because of calcareous bedrock. Seeps and mine pools at the mine site had acidic to neutral pH, ranged from oxic to anoxic, and generally contained concentrations of metals, for example, aluminum, cadmium, copper, iron, and zinc, that exceeded aquatic toxicity standards or drinking-water standards, or both. Surface waters directly downstream of the Eureka and Union mines were acidic, as indicated by pH values from 3.1 to 4.2, and contained high concentrations of some elements including as much as 11,400 micrograms per liter (?g/L) Al, as much as 22.9 ?g/L Cd, as much as 6,790 ?g/L Cu, as much as 23,300 ?g/L Fe, as much as 1,400 ?g/L Mn, and as much as 3,570 ?g/L Zn. The concentrations of these elements exceeded water-quality guidelines. Generally, in surface waters, the pH increased and the concentrations of these elemen

Scientific Investigations Report↗

USGS1997

Geologic setting and characteristic of mineral deposits in the central Wasatch Mountains, Utah

Base- and precious-metal deposits in the central Wasatch Mountains southeast of Salt Lake City were mined for more than 100 years beginning in 1868. Deposits present in the Park City, Little Cottonwood, and Big Cottonwood mining districts include Ag-Pb-Zn ± Cu ± Au replacements and veins, a low-grade porphyry Cu-Au deposit, Cu-bearing skarns, a quartz monzonite-type (low F) porphyry Mo deposit, and high sulfidation (quartz-alunite) Au deposits. Most production came from polymetallic replacement and vein deposits in the Park City mining district, which has a recorded production of more than 1.4 million oz Au, 253 million oz Ag, 2.7 billion lbs Pb, 1.5 billion lbs Zn, and 129 million lbs Cu from 1872 to 1978. Production in the Little and Big Cottonwood districts, mostly from Pb-Ag replacement deposits, was much smaller. Most mineral deposits in the central Wasatch Mountains are genetically related to the Wasatch igneous belt, a series of high-K calc-alkaline stocks and cogenetic volcanic rocks that formed about 41(?) to 30 Ma. The mineral deposits mostly formed near the end of magmatic activity between about 36 to 31.4 Ma. A subeconomic porphyry Mo deposit in the Little Cottonwood stock is notably younger having formed about 26 to 23.5 Ma. The intrusive rocks were emplaced mostly along the westward extension of the west-trending Uinta arch during a period of NW-SE-directed extension, and much of the mineralization in the Park City district was controlled by ENE-striking normal faults. About 15 degrees of eastward tilting of the central Wasatch Mountains during Late Cenozoic Basin and Range extension has resulted in progressively deeper levels of exposure from <1 km on the east to about 11 km on the west and in profound variations in the types of mineral deposits exposed in different parts of the range. Most deposits formed at paleodepths ≤5 km, and the most productive deposits in the Park City district formed at depths of 1 to 2 km. The porphyry Mo deposit in the Little Cottonwood stock formed at greater depths of about 6 km.

Utah↗

USGS2007

Landscape geochemistry near mineralized areas of eastern Alaska: Chapter H in Recent U.S. Geological Survey studies in the Tintina Gold Province, Alaska, United States, and Yukon, Canada--results of a 5-year project

The Pogo lode gold deposit was discovered in eastern Alaska in the early 1990s and provided the opportunity to study elemental distribution and mobility in the natural environment prior to mine development. Studying mineralized systems prior to mining allows us to compare the natural biogeochemical signature in mineralized versus nonmineralized areas. The resultant data and interpretation also provide a baseline for evaluating what, if any, changes in elemental distribution result from development. This report investigates the chemistry of stream water, streambed sediment, and soil in the context of regional bedrock geology. The major-ion chemistry of the waters reflects a rock-dominated aqueous system, and the waters are classified as Ca 2+ and Mg 2+ - HCO 3 - to Ca 2+ and Mg 2+ - SO 4 -2 waters. Creeks draining the gneissic lithologies tend to be more sulfate dominated than those draining the intrusive units. Sulfate also dominated creeks draining mineralized areas; however, the underlying paragneiss unit could be contributing substantially to the sulfate concentration, and the sulfate concentration in these creeks may reflect a complex baltholith-paragneiss boundary rather than mineralization. Arsenic concentrations in bed sediments were elevated in mineralized areas relative to nonmineralized areas. Elevated concentrations of nickel, chromium, iron, manganese, and cobalt appear to reflect the presence of ultramafic rocks in the drainage. In general, aqueous metal concentrations were below the State of Alaska’s Aquatic Life Criteria and Drinking Water Standards, with the exception of arsenic in stream water, which ranged in concentration from less than 1 to 14 micrograms per liter (μg/L) and exceeded the drinking water standard at one site. The arsenic and antimony concentration in the A, B, and C soil horizons ranged from 3 to 410 milligrams per kilogram (mg/kg), 6.1 to 440 mg/kg, and 2 to 300 mg/kg, respectively, for arsenic and 0.4 to 24 mg/kg, 0.6 to 25 mg/kg, and 0.2 to 16 mg/kg, respectively, for antimony. The arsenic and antimony concentrations in stream waters correlate well with the concentrations in soils. However, significantly less arsenic and antimony was extracted from C horizon soils in water leaching experiments, indicating that the arsenic and antimony in the C horizon is present in a less available form than in the A or B horizons. Arsenic and antimony uptake by grayleaf willow (Salix glauca L.) appears minimal, with arsenic concentrations ranging from less than 0.01 to 0.14 mg/kg and antimony concentrations ranging from less than 0.003 to 0.23 mg/kg in willow leaves. In general, the highest concentrations of both arsenic and antimony in water and soils were found near mineralized areas. Elevated arsenic concentrations were also found in bed sediments from mineralized areas. In these sample matrices, the presence of arsenic and (or) antimony was a good indicator of contact with mineralized rock units.

Alaska;Yukon↗

USGS1979

The importance of dissolved free oxygen during formation of sandstone-type uranium deposits

One factor which distinguishes t, he genesis of roll-type uranium deposits from the Uravan Mineral Belt and other sandstone-type uranium deposits may be the presence and concentration of dissolved free oxygen in the ore-forming. solutions. Although dissolved oxygen is a necessary prerequisite for the formation of roll-type deposits, it is proposed that a lack of dissolved oxygen is a prerequisite for the Uravan deposits. Solutions that formed both types of deposits probably had a supergene origin and originated as meteoric water in approximate equilibrium with atmospheric oxygen. Roll-type deposits were formed where the Eh dropped abruptly following consumption of the oxygen by iron sulfide minerals and creation of kinetically active sulfur species that could reduce uranium. The solutions that formed the Uravan deposits, on the other hand, probably first equilibrated with sulfide-free ferrous-ferric detrital minerals and fossil organic matter in the host rock. That is, the uraniferous solutions lost their oxygen without lowering their Eh enough to precipitate uranium. Without oxygen, they then. became incapable of oxidizing iron sulfide minerals. Subsequent localization and formation of ore bodies from these oxygen-depleted solutions, therefore, was not necessarily dependent on large reducing capacities.

Open-File Report↗

USGS1973

Silica-carbonate alteration of serpentine: Wall rock alteration in mercury deposits of the California Coast Ranges

Chemical, isotopic, and thermodynamic properties have been measured of CO 2 -rich ground waters in the central California Coast Ranges. The acidic CO 2 -rich waters react with serpentine to form silica-carbonate rock, the host rock of many mercury deposits in the Coast Range of California. In part the waters are of a metamorphic origin and in part the waters are locally derived meteoric waters. The CO 2 is entirely derived from metamorphic reactions at depth. Depending on the relative importance of several reactions, the relative abundances of silica and carbonate minerals vary in the silica-carbonate rock. If the CO 2 -rich fluids react directly with peridotite or dunite, massive magnesite deposits may form. © 1973 Society of Economic Geologists, Inc.

California↗

USGS2000

Geochronology and geology of late Oligocene through Miocene volcanism and mineralization in the western San Juan Mountains, Colorado

Twenty-five new 40Ar/39Ar ages from volcanic rocks and veins in the western San Juan Mountains clarify relationships between volcanism and mineralization in this classic area. Five calc-alkaline ash-flow sheets erupted from caldera sources (Ute Ridge, Blue Mesa, Dillon Mesa, Sapinero Mesa, and Crystal Lake Tuffs) from 28.6 to 27.6 Ma. This is a much more restricted time interval than previously thought and indicates that the underlying batholith rose and evolved very rapidly beneath the western San Juan Mountains. The new ages and geologic relations constrain the timing of joint resurgence of the Uncompahgre and San Juan calderas to between 28.2 and 27.6 Ma. The collapse of the Silverton caldera produced a set of strong ring fractures that intersected with graben faults on the earlier resurgent dome to produce the complex set of structures that localized the mid-Miocene epithermal gold veins. Later calc-alkaline monzonitic to quartz monzontic plutons solidified at 26.5-26.0 Ma as the underlying batholith rose through its volcanic cover. A new age from lavas near Uncompahgre Peak supports earlier interpretations that these lavas were fed by nearby 26 Ma monzonite intrusions. Nearly all of these intrusions are associated with subeconomic Mo and Cu mineralization and associated alteration, and new ages of 26.40 and 25.29 Ma from the Ute-Ulay and Lilly veins in the Lake City region show that some of the most important silver and base-metal veins were temporally and possibly genetically connected to these plutons. In addition, the Golden Fleece telluride vein cuts all of the post-Uncompahgre caldera volcanics in the area and is probably temporally related to this cycle, though its age of 27.5 ? 0.3 Ma was determined by less precise U/Pb methods. The 22.9 Ma Lake City caldera collapsed within the older Uncompahgre caldera structure but is petrologically unrelated to the older calc-alkaline activity. The distinctive suite of high-silica rhyolite tuff and alkaline resurgent intrusions indicates that it is closely related to the early stages of bimodal high-silica rhyolite-alkali basalt volcanism that accompanied the onset of extensional tectonism in the region. Both 40Ar/39Ar ages and paleomagnetic data confirm that the entire caldera sequence formed in less than 330,000 years. Only weak quartz vein mineralization is present in the center of the caldera, and it appears to be related to leaching of metals from the intracaldera tuffs above the resurgent intrusion. Massive alunitization and weak Mo and Cu mineralization along the eastern ring fracture are associated with calc-alkaline lavas and stocks related to late stages of the caldera cycle. These calc-alkaline stocks also appear to be genetically and temporally linked to a radial pattern of barite-precious metal veins on the northeastern margin of the Lake City caldera.

Colorado↗

USGS2013

Zirconium

Zirconium is the 20th most abundant element in the Earth’s crust. It occurs in a variety of rock types and geologic environments but most often in igneous rocks in the form of zircon (ZrSiO 4 ). Zircon is recovered as a coproduct of the mining and processing of heavy mineral sands for the titanium minerals ilmenite and rutile. The sands are formed by the weathering and erosion of rock containing zircon and titanium heavy minerals and their subsequent concentration in sedimentary systems, particularly in coastal environments. A small quantity of zirconium, less than 10 kt/a (11,000 stpy), compared with total world production of 1.4 Mt (1.5 million st) in 2012, was derived from the mineral baddeleyite (ZrO 2 ), produced from a single source in Kovdor, Russia.

Mining Engineering↗

USGS1978

Origin of a South Texas roll-type uranium deposit; I, Alteration of iron-titanium oxide minerals

The detrital Fe-Ti oxide minerals and their authigenic alteration products in samples from cores spanning 1.7 km across a roll-type uranium deposit in the mid-Tertiary Catahoula Tuff, south Texas, record important information on host-rock preparation and on development of the altered tongue of the deposit. In reduced rock, in front of and enveloping the altered tongue, iron disulfide minerals (pyrite and marcasite) have partially to completely replaced titanomagnetite and, to a lesser extent, titanohematite. Subsequent oxidation of these sulfidized Fe-Ti oxides, by processes that formed the altered tongue and uranium roll, produced ferric oxide and hydroxide phases (limonite) pseudomorphous after the sulfides. Fe-Ti oxides 1.0 km updip from the roll front were never sulfidized; titanomagnetite (partly replaced by hematite) and martite constitute nearly half of the heavy mineral fraction and limonite is absent. Oxidized rocks 210 m and closer to the nose of the roll front, however, are nearly devoid of titanomagnetite and contain abundant limonite. The redox interface that bounds the altered tongue, therefore, moved more than 210 m but less than 1.0 km. Detrital Fe-Ti oxide minerals are increasingly sulfidized in the downdip direction indicating that initial sulfidizaton was more intense in that direction. Organic carbon content is uniformly very low throughout the host sandstone, which implies that heterotrophic sulfate-reducing bacteria were not involved in the generation of sulfide. The H 2 S for the initial sulfidization may have been derived from oil and gas in formations that underlie the Catahoula Tuff. The H 2 S probably invaded the Catahoula along a fault that is 1.5 km downdip from the present roll front.

Texas↗

USGS2007

Chemical data for rock, sediment, biological, precipitate, and water samples from abandoned copper mines in Prince William Sound, Alaska

Introduction In the early 20th century, approximately 6 million metric tons of copper ore were mined from numerous deposits located along the shorelines of fjords and islands in Prince William Sound, Alaska. At the Beatson, Ellamar, and Threeman mine sites (fig. 1), rocks containing Fe, Cu, Zn, and Pb sulfide minerals are exposed to chemical weathering in abandoned mine workings and remnant waste piles that extend into the littoral zone. Field investigations in 2003 and 2005 as well as analytical data for rock, sediment, precipitate, water, and biological samples reveal that the oxidation of sulfides at these sites is resulting in the generation of acid mine drainage and the transport of metals into the marine environment (Koski and others, 2008; Stillings and others, 2008). At the Ellamar and Threeman sites, plumes of acidic and metal-enriched water are flowing through beach gravels into the shallow offshore environment. Interstitial water samples collected from beach sediment at Ellamar have low pH levels (to ~3) and high concentrations of metals including iron, copper, zinc, cobalt, lead, and mercury. The abundant precipitation of the iron sulfate mineral jarosite in the Ellamar gravels also signifies a low-pH environment. At the Beatson mine site (the largest copper mine in the region) seeps containing iron-rich microbial precipitates drain into the intertidal zone below mine dumps (Foster and others, 2008). A stream flowing down to the shoreline from underground mine workings at Beatson has near-neutral pH, but elevated levels of zinc, copper, and lead (Stillings and others, 2008). Offshore sediment samples at Beatson are enriched in these metals. Preliminary chemical data for tissue from marine mussels collected near the Ellamar, Threeman, and Beatson sites reveal elevated levels of copper, zinc, and lead compared to tissue in mussels from other locations in Prince William Sound (Koski and others, 2008). Three papers presenting results of this ongoing investigation of sulfide oxidation in Prince William Sound are in press. Koski and others (2008) provide an overview of rock alteration, surface water chemistry, and the distribution of metals at the Ellamar, Threeman, and Beatson mine sites. Based on a 60-day, stream-discharge experiment at Beatson in 2005, Stillings and others (2008) analyze changes in water chemistry during storm events and the flux of metals to the shoreline. Foster and others (2008) investigate the biomass and diversity of microbial communities present in surface waters (streams, seeps, pore waters) using fatty acid methyl ester (FAMES) data and principal component analysis. The publications cited above contain a subset of the total chemical data for rock, sediment, biological, precipitate, and water samples collected from the three mine sites in 2003 and 2005. The purpose of this report is the presentation of complete chemical data sets for all samples collected during the two field periods of fieldwork. Data for a small number of samples collected at two other mines (Schlosser and Fidalgo, fig. 1), visited in 2003, are also included in the tables.

Alaska↗

USGS2007

Chemical data for rock, sediment, biological, precipitate, and water samples from abandoned copper mines in Prince William Sound, Alaska

In the early 20th century, approximately 6 million metric tons of copper ore were mined from numerous deposits located along the shorelines of fjords and islands in Prince William Sound, Alaska. At the Beatson, Ellamar, and Threeman mine sites (fig. 1), rocks containing Fe, Cu, Zn, and Pb sulfide minerals are exposed to chemical weathering in abandoned mine workings and remnant waste piles that extend into the littoral zone. Field investigations in 2003 and 2005 as well as analytical data for rock, sediment, precipitate, water, and biological samples reveal that the oxidation of sulfides at these sites is resulting in the generation of acid mine drainage and the transport of metals into the marine environment (Koski and others, 2008; Stillings and others, 2008). At the Ellamar and Threeman sites, plumes of acidic and metal-enriched water are flowing through beach gravels into the shallow offshore environment. Interstitial water samples collected from beach sediment at Ellamar have low pH levels (to ~3) and high concentrations of metals including iron, copper, zinc, cobalt, lead, and mercury. The abundant precipitation of the iron sulfate mineral jarosite in the Ellamar gravels also signifies a low-pH environment. At the Beatson mine site (the largest copper mine in the region) seeps containing iron-rich microbial precipitates drain into the intertidal zone below mine dumps (Foster and others, 2008). A stream flowing down to the shoreline from underground mine workings at Beatson has near-neutral pH, but elevated levels of zinc, copper, and lead (Stillings and others, 2008). Offshore sediment samples at Beatson are enriched in these metals. Preliminary chemical data for tissue from marine mussels collected near the Ellamar, Threeman, and Beatson sites reveal elevated levels of copper, zinc, and lead compared to tissue in mussels from other locations in Prince William Sound (Koski and others, 2008). Three papers presenting results of this ongoing investigation of sulfide oxidation in Prince William Sound are in press. Koski and others (2008) provide an overview of rock alteration, surface water chemistry, and the distribution of metals at the Ellamar, Threeman, and Beatson mine sites. Based on a 60-day, stream-discharge experiment at Beatson in 2005, Stillings and others (2008) analyze changes in water chemistry during storm events and the flux of metals to the shoreline. Foster and others (2008) investigate the biomass and diversity of microbial communities present in surface waters (streams, seeps, pore waters) using fatty acid methyl ester (FAMES) data and principal component analysis. The publications cited above contain a subset of the total chemical data for rock, sediment, biological, precipitate, and water samples collected from the three mine sites in 2003 and 2005. The purpose of this report is the presentation of complete chemical data sets for all samples collected during the two field periods of fieldwork. Data for a small number of samples collected at two other mines (Schlosser and Fidalgo, fig. 1), visited in 2003, are also included in the tables.

Alaska↗

USGS1990

As, Bi, Hg, S, Sb, Sn and Te geochemistry of the J-M Reef, Stillwater Complex, Montana: Constraints on the origin of PGE-enriched sulfides in layered intrusions

The J-M Reef is an interval of disseminated sulfides in the Lower Banded series of the Stillwater Complex that is enriched in the platinum group elements (PGE). Palladium and Pt occur in solid solution in base-metal sulfides and as discrete PGE minerals. PGE minerals include sulfides, tellurides, arsenides, antimonides, bismuthides, and alloys with Fe, Sn, Hg, and Au. Several subpopulations can be delineated based on whole-rock chemical analyses for As, Bi, Cu, Hg, Pd, Pt, S, Sb and Te for samples collected from and adjacent to the J-M Reef. In general, samples from within the reef have higher Pt/Cu, Pd/Cu, Pd/Pt, Te/Bi and S/(Te+Bi) than those collected adjacent to the reef. Vertical compositional profiles through the reef suggest that Pd/Cu and Pt/Cu decrease systematically upsection from mineralized to barren rock. The majority of samples with elevated As, Sb and Hg occur adjacent to the reef, not within it, or in sulfide-poor rocks Neither magma mixing nor fluid migration models readily explain why the minor quantities of sulfide minerals immediately adjacent to the sulfide-enriched layers that form the J-M Reef have different element ratios than the sulfide minerals that form the reef. If all the sulfides formed by exsolution during a magma mixing event and the modal proportion of sulfide now in the rocks are simply the result of mechanical processes that concentrated the sulfides into some layers and not others, then the composition of the sulfide would not be expected to be different. Models that rely upon ascending liquids or fluids are incompatible with the presence of sulfides that are not enriched in PGE immediately below or interlayered with the PGE-enriched sulfides layers. PGE-enriched postcumulus fluids should have reacted to the same extent with sulfides immediately outside the reef as within the reef.

Journal of Geochemical Exploration↗

USGS2015

Hydrogeochemistry and microbiology of mine drainage: An update

The extraction of mineral resources requires access through underground workings, or open pit operations, or through drillholes for solution mining. Additionally, mineral processing can generate large quantities of waste, including mill tailings, waste rock and refinery wastes, heap leach pads, and slag. Thus, through mining and mineral processing activities, large surface areas of sulfide minerals can be exposed to oxygen, water, and microbes, resulting in accelerated oxidation of sulfide and other minerals and the potential for the generation of low-quality drainage. The oxidation of sulfide minerals in mine wastes is accelerated by microbial catalysis of the oxidation of aqueous ferrous iron and sulfide. These reactions, particularly when combined with evaporation, can lead to extremely acidic drainage and very high concentrations of dissolved constituents. Although acid mine drainage is the most prevalent and damaging environmental concern associated with mining activities, generation of saline, basic and neutral drainage containing elevated concentrations of dissolved metals, non-metals, and metalloids has recently been recognized as a potential environmental concern. Acid neutralization reactions through the dissolution of carbonate, hydroxide, and silicate minerals and formation of secondary aluminum and ferric hydroxide phases can moderate the effects of acid generation and enhance the formation of secondary hydrated iron and aluminum minerals which may lessen the concentration of dissolved metals. Numerical models provide powerful tools for assessing impacts of these reactions on water quality.

Applied Geochemistry↗

USGS2007

Main Andean sinistral shear along the Cooper Bay Dislocation Zone, South Georgia?

The Cooper Bay Dislocation Zone (CBDZ) represents a major NW-SE trending tectonic boundary within the island of South Georgia that juxtaposes components of a Middle Jurassic to mid-Cretaceous island-arc and back-arc- basin system. New detailed structural data from the southern end of the dislocation zone reveal that earliest displacement along the boundary appears to have been associated with dip-slip reverse shear, characterised by widespread proto- to meso-mylonitic granitic rocks within the basement assemblage exposed to the southwest of the shear zone. Along the northeast margin, highly sheared and mylonitised metasedimentary and metabasic rocks reveal sinistral strike-slip kinematics and a sub-horizontal mineral lineation. Narrow zones of sinistral shear are locally superimposed within the basement rocks along the SW margin, that together with the presence of brittle sinistral faults suggest that the strike-slip component of deformation postdates the dip-slip. Comparison with the tectonic history of the Rocas Verdas Marginal Basin, Fuegian Andes, suggests that the sinistral shear event preserved along the CBDZ maybe be related to Late Cretaceous, main Andean orogenic transpression, although a Cenozoic event cannot to ruled out.

Open-File Report↗

USGS2025

Timing of hydrothermal alteration and Au-Sb-W mineralization, Stibnite-Yellow Pine district, Idaho

The Stibnite-Yellow Pine district of central Idaho was mined from the early 1900s until the 1990s, extracting gold, antimony, tungsten, and mercury from veins and disseminated and replacement ores in mountainous terrain along the headwaters of the Salmon River. Mining during the two World Wars supplied critical antimony and tungsten to the war efforts. Recent exploration has delineated mineral resources of over 187 metric tons Au, 274 metric tons Ag, and 93,000 metric tons Sb. Mineralization is hosted in Cretaceous Idaho batholith granitic rocks and a sequence of Neoproterozoic to Paleozoic metasedimentary strata of carbonate and siliciclastic compositions. Historical studies outlined some of the complex paragenesis but debated the absolute age of mineralization. New petrographic and geochronologic work documents a sequence of five hydrothermal events in the Stibnite-Yellow Pine district. Event 1 is related to Cretaceous magmatic and hydrothermal activity and includes events ranging in age from 86 to 75 Ma, including sparse quartz-molybdenite veins dated at 86 Ma. Disseminated gold mineralization of event 2 is associated with sericitic alteration and sulfidation of igneous biotite and replacement of plagioclase by potassium feldspar, largely in granodiorite. Gold is present in zoned arsenian pyrite in both disseminated ores and in crosscutting carbonate-quartz veins containing pyrite and arsenopyrite. The large Yellow Pine deposit, localized at a dilatant bend in the Meadow Creek fault, hosts such disseminated and vein gold. Event 2 is interpreted as the major gold-forming event; 40 Ar/ 39 Ar ages of sericite and potassium feldspar alteration range, respectively, from 70 to 59 and 66 to 56 Ma. The long span is interpreted to reflect the age of gold mineralization and local overprinting by event 3. A narrower range from 66 to 61 Ma is interpreted to date the peak of gold mineralization and alteration. Event 3, tungsten mineralization with scheelite, is texturally later than event 2 gold and localized along the Meadow Creek structure. Event 3 scheelite has been dated by isotope dilution-thermal ionization mass spectrometry (ID-TIMS) and laser ablation-inductively coupled plasma-mass spectrometry (LA-ICP-MS) U-Pb methods at 57 Ma. Event 4, best developed in the West End area, includes gold-silver–bearing quartz-carbonate-pyrite veins and breccias with epithermal textures and potassium feldspar alteration envelopes. Adularia from event 4 yields 40 Ar/ 39 Ar plateau ages of 52 to 51 Ma. Event 5 antimony and mercury mineralization consists of stibnite veins and breccia cements at the Yellow Pine and Hangar Flat deposits as well as cinnabar veins and replacements at the peripheral Fern and Hermes deposits; it is constrained by an LA-ICP-MS U-Pb date on scheelite (ca. 47 Ma) intergrown with stibnite. Minor propylitic and argillic alteration is evident in 47 Ma igneous dikes, which do not contain economic mineralization. The Au-Sb-W ores in the Stibnite-Yellow Pine mining district formed over an extended time period from about 70 to 45 Ma in multiple pulses that were localized along the Meadow Creek fault zone. Each event corresponds to episodes of magmatism and/or hydrothermal activity in the region. Insignificant event 1 skarn and molybdenum mineralization is similar in age to the Thompson Creek porphyry molybdenum deposit in central Idaho. Event 2 gold mineralization occurred during a magmatic gap in central Idaho but was synchronous with magmatism in the Bitterroot lobe further north; event 2 is similar in age to orogenic gold-arsenic mineralization at the Beartrack mine in eastern Idaho. Event 3 scheelite mineralization coincides with tungsten mineralization at the Quartz Creek deposit, late magmatism in the Bitterroot lobe, and rapid exhumation of the Atlanta lobe of the Idaho batholith. Event 4 gold mineralization is coincident with the onset of regional Challis magmatism and extension. Event 5 antimony and mercury mineralization is time-equivalent to epithermal gold mineralization in the nearby Thunder Mountain volcanic field and the peak of Challis magmatism.

Idaho↗

USGS1999

The USGS Abandoned Mine Lands Initiative: Protecting and restoring the environment near abandoned mine lands

The Abandoned Mine Lands (AML) Initiative is part of a larger strategy of the U.S. Department of the Interior and the U.S. Department of Agriculture to clean up Federal lands contaminated by abandoned mines. Thousands of abandond hard-rock metal mines (such as gold, copper, lead, and zinc) have left a dual legacy across the Western United States. They reflect the historic development of the west, yet at the same time represent a possible threat to human health and local ecosystems. Abandoned Mine Lands (AML) are areas adjacent to or affected by abandoned mines. AML's often contain unmined mineral deposits, mine dumps (the ore and rock removed to get to the ore deposits), and tailings (the material left over from the ore processing) that contaminate the surrounding watershed and ecosystem. For example, streams near AML's can contain metals and (or) be so acidic that fish and aquatic insects cannot live in them. Many of these abandoned hard-rock mines are located on or adjacent to public lands administered by the Bureau of Land Management, National Park Service, and U.S. Forest Service. These federal land management agencies and the USGS are committed to mitigating the adverse effects that AML's can have on water quality and stream habitats. The USGS AML Initiative began in 1997 and will continue through 2001 in two pilot watersheds - the Boulder River basin in southwestern Montana and the upper Animas River basin in southwestern Colorado. The USGS is providing a wide range of scientific expertise to help land managers minimize and, where possible, eliminate the adverse environmental effects of AML's. USGS ecologists, geologists, water quality experts, hydrologists, geochemists, and mapping and digital data collection experts are collaborating to provide the scientific knowledge needed for an effective cleanup of AML's.

Arizona, California, Colorado, Idaho, Montana, New↗

USGS1981

Sequential extraction techniques applied to a porphyry copper deposit in the basin and range province

Samples of minus-80-mesh (<180 μm) stream sediment, rock containing exposed fracture coatings, and jarosite and chrysocolla were collected from an area surrounding the North Silver Bell porphyry Cu deposit near Tucson, Arizona. The samples were subjected to a series of extractions in a scheme originally designed for use on samples from humid or sub-humid environments, in which the following fractions can effectively be separated: (1) carbonates and exchangeable metals; (2) Mn oxides; (3) organic compounds and sulfides; (4) hydrous Fe oxides; and (5) residual crystalline minerals. Jarosite and chrysocolla, two major minerals of the North Silver Bell area, were found to dissolve over two or more steps of the extraction scheme. The results represent only a limited number of samples from one copper deposit. Nevertheless, they do suggest that in a semiarid to arid environment, where mechanical dispersion of such minerals predominates, uncritical assignment of unique phases, such as Mn oxides or organics to a given extraction would lead to false interpretations of weathering processes. However, the relative proportions of elements dissolved in each step of the jarosite and chrysocolla extractions could be used as a “fingerprint” for recognition of the presence of these two minerals in the stream-sediment and rock samples. The relative abundance of hydrous Fe oxide and jarosite and the alteration zoning could be mapped using data from jarosite and chrysocolla extractions. Manganese oxides were also found to have a greater influence on Zn than on Cu or Pb during supergene alteration. The rapid change in relative importance of the first (1 M -acetic acid) extraction for Cu, Zn, and Pb near the mineralized zone suggested the occurrence of minor hydromorphic processes within the stream sediments. Thus, the acetic acid extraction proved the most effective for pinpointing mineralization in sediments. In contrast, the residual fraction had the longest dispersion train, suggesting that total metal concentrations are most effective in arid environments for reconnaissance surveys.

Journal of Geochemical Exploration↗