Timing of hydrothermal alteration and Au-Sb-W mineralization, Stibnite-Yellow Pine district, Idaho

Virginia S. Gillerman; Leah E. Morgan; Albert H. Hofstra; Niki E. Wintzer; Peter Vikre; Mitchell M. Bennett; Christopher S. Holm-Denoma; Jeff A. Benowitz; Mark D. Schmitz; Sergey A. Konyshev; Paul W. Layer

doi:10.5382/econgeo.5061

USGS · 70279226

Timing of hydrothermal alteration and Au-Sb-W mineralization, Stibnite-Yellow Pine district, Idaho

Virginia S. Gillerman·Leah E. Morgan·Albert H. Hofstra·Niki E. Wintzer·Peter Vikre·Mitchell M. Bennett·Christopher S. Holm-Denoma·Jeff A. Benowitz·Mark D. Schmitz·Sergey A. Konyshev·Paul W. Layer

View original source ↗Export metadata ↓

Abstract

The Stibnite-Yellow Pine district of central Idaho was mined from the early 1900s until the 1990s, extracting gold, antimony, tungsten, and mercury from veins and disseminated and replacement ores in mountainous terrain along the headwaters of the Salmon River. Mining during the two World Wars supplied critical antimony and tungsten to the war efforts. Recent exploration has delineated mineral resources of over 187 metric tons Au, 274 metric tons Ag, and 93,000 metric tons Sb. Mineralization is hosted in Cretaceous Idaho batholith granitic rocks and a sequence of Neoproterozoic to Paleozoic metasedimentary strata of carbonate and siliciclastic compositions. Historical studies outlined some of the complex paragenesis but debated the absolute age of mineralization. New petrographic and geochronologic work documents a sequence of five hydrothermal events in the Stibnite-Yellow Pine district. Event 1 is related to Cretaceous magmatic and hydrothermal activity and includes events ranging in age from 86 to 75 Ma, including sparse quartz-molybdenite veins dated at 86 Ma. Disseminated gold mineralization of event 2 is associated with sericitic alteration and sulfidation of igneous biotite and replacement of plagioclase by potassium feldspar, largely in granodiorite. Gold is present in zoned arsenian pyrite in both disseminated ores and in crosscutting carbonate-quartz veins containing pyrite and arsenopyrite. The large Yellow Pine deposit, localized at a dilatant bend in the Meadow Creek fault, hosts such disseminated and vein gold. Event 2 is interpreted as the major gold-forming event; 40 Ar/ 39 Ar ages of sericite and potassium feldspar alteration range, respectively, from 70 to 59 and 66 to 56 Ma. The long span is interpreted to reflect the age of gold mineralization and local overprinting by event 3. A narrower range from 66 to 61 Ma is interpreted to date the peak of gold mineralization and alteration. Event 3, tungsten mineralization with scheelite, is texturally later than event 2 gold and localized along the Meadow Creek structure. Event 3 scheelite has been dated by isotope dilution-thermal ionization mass spectrometry (ID-TIMS) and laser ablation-inductively coupled plasma-mass spectrometry (LA-ICP-MS) U-Pb methods at 57 Ma. Event 4, best developed in the West End area, includes gold-silver–bearing quartz-carbonate-pyrite veins and breccias with epithermal textures and potassium feldspar alteration envelopes. Adularia from event 4 yields 40 Ar/ 39 Ar plateau ages of 52 to 51 Ma. Event 5 antimony and mercury mineralization consists of stibnite veins and breccia cements at the Yellow Pine and Hangar Flat deposits as well as cinnabar veins and replacements at the peripheral Fern and Hermes deposits; it is constrained by an LA-ICP-MS U-Pb date on scheelite (ca. 47 Ma) intergrown with stibnite. Minor propylitic and argillic alteration is evident in 47 Ma igneous dikes, which do not contain economic mineralization. The Au-Sb-W ores in the Stibnite-Yellow Pine mining district formed over an extended time period from about 70 to 45 Ma in multiple pulses that were localized along the Meadow Creek fault zone. Each event corresponds to episodes of magmatism and/or hydrothermal activity in the region. Insignificant event 1 skarn and molybdenum mineralization is similar in age to the Thompson Creek porphyry molybdenum deposit in central Idaho. Event 2 gold mineralization occurred during a magmatic gap in central Idaho but was synchronous with magmatism in the Bitterroot lobe further north; event 2 is similar in age to orogenic gold-arsenic mineralization at the Beartrack mine in eastern Idaho. Event 3 scheelite mineralization coincides with tungsten mineralization at the Quartz Creek deposit, late magmatism in the Bitterroot lobe, and rapid exhumation of the Atlanta lobe of the Idaho batholith. Event 4 gold mineralization is coincident with the onset of regional Challis magmatism and extension. Event 5 antimony and mercury mineralization is time-equivalent to epithermal gold mineralization in the nearby Thunder Mountain volcanic field and the peak of Challis magmatism.

Explore related subjects

Economic Geology Article

Source-reported bounding extent: 44.833° to 45.133° latitude; -115.5° to -115.1333° longitude. This indicates report coverage, not an exact sampling location. View area on OpenStreetMap.

Keep this discovery

Explore connections, maps & timelines

BibTeX RIS

Virginia S. Gillerman, Leah E. Morgan, Albert H. Hofstra, Niki E. Wintzer, Peter Vikre, Mitchell M. Bennett, Christopher S. Holm-Denoma, Jeff A. Benowitz, Mark D. Schmitz, Sergey A. Konyshev, Paul W. Layer. 2025. Timing of hydrothermal alteration and Au-Sb-W mineralization, Stibnite-Yellow Pine district, Idaho. https://doi.org/10.5382/econgeo.5061

Cite the original work for its findings. Save a collection to share your selection of sources.

Discover connections

Idaho place United STates place Article subject Economic Geology subject Stibnite-Yellow Pine district place

Connections use source metadata and explicit phrase matches, not verified experimental comparisons.

KEEP EXPLORING

Related USGS reports

USGS2026

Origin of the Pd/Pt ratio of the J-M Reef, Stillwater Complex, Montana, USA

The J-M reef of the Stillwater Complex is characterized by a high Pd/Pt ratio (mean ~3.8 with a standard error of 0.03) with a homogeneous geospatial distribution at the deposit scale. In this contribution, we demonstrate that the Pd/Pt ratio of the reef is the product of equilibration of an immiscible sulfide liquid with a silicate melt rich in Pd relative to Pt. Despite the high tenors of the J-M reef sulfides (avg 2,700 ppm Pt and 770 ppm Pt), numerical modeling shows that the parental melts did not have extraordinary Pd and Pt concentrations. Instead, the initial composition of a plausible parental silicate melt can have Pd and Pt contents well within the expected range of a normal, mantle-derived partial melt (i.e., ~10–20 ppb for both Pd and Pt with Pd/Pt of ~1). The relative differences in the partitioning behavior of Pt and Pd between sulfide liquid and silicate melt are unlikely to produce a consistent Pd/Pt ratio across a wide range of silicate melt to sulfide liquid mass ratios (i.e., R factors). Instead, the pre-emplacement fractionation of Pt alloy from S-undersaturated silicate magma accounts for the homogeneous and high Pd/Pt ratio of the J-M reef. We show that batch equilibration of sulfide liquid with silicate melt can produce the high Pd/Pt ratios of the reef if the partition coefficients between sulfide liquid and silicate melt for Pd and Pt are extremely high (>10 6 ). In an alternative model, Pd enrichment could be achieved by sulfide upgrading in resident footwall mush even if the partition coefficients between sulfide liquid and silicate melt are relatively small (between 10 4 and 10 6 ) because the instantaneous mass ratio of silicate melt to sulfide liquid is small (R ≈ 100–700), so the partitioning behavior of Pt and Pd has little impact on the composition of sulfide liquid.

Montana↗

USGS2025

Depth of magma crystallization and fluid exsolution beneath the porphyry-skarn Cu deposits at Santa Rita and Hanover-Fierro, New Mexico, USA

The depth level at which porphyry Cu–forming magmas fractionated and exsolved mineralizing fluids is actively debated. In the classic model, extensive magma fractionation occurs in large, upper crustal magma chambers, and concomitant fluid exsolution leads to forceful expulsion of residual magmas in the form of porphyry dikes, stocks, and breccia pipes, which subsequently serve as pathways for the mineralizing fluids. In contrast, some recent studies highlighting the role of deep crustal magma fractionation in the production of fertile magmas essentially deny the existence of upper crustal magma chambers at the time of mineralization. To address this, we conducted a detailed thermobarometric investigation of 13 intermediate to felsic, porphyritic intrusive rocks related to porphyry-skarn Cu mineralization at Santa Rita and Hanover-Fierro, New Mexico, United States, representing two premineralization magmas (61–60 Ma), seven synmineralization magmas (60–58 Ma), and four late- to postmineralization magmas (58–57 Ma). For each sample, the pressure of last magma crystallization before final magma ascent to the current exposure level was reconstructed based on Al-in-hornblende barometry of small hornblende inclusions trapped within quartz phenocrysts and through titanium-in-quartz (TitaniQ) thermobarometry of the host quartz phenocrysts themselves. Since quartz is one of the last crystallizing magmatic minerals, and no significant phenocryst growth could have occurred in small dikes and stocks after final magma emplacement, quartz phenocrysts and their contained hornblende inclusions record the depth of last magma crystallization before final magma ascent. When present, hornblende phenocrysts and hornblende inclusions within other major phenocrysts were also analyzed. Both quartz and hornblende barometers return consistent average pressures of 3.2 ± 0.4 kbar for the entire suite of pre- to postmineralization magmas, corresponding to depths of 11 to 14 km. The synmineralization magmas return even more consistent average pressures of 3.1 ± 0.2 kbar, corresponding to a depth of 12 ± 1 km. The volume of the mineralizing porphyry dikes and stocks at the emplacement level is far too small to have provided all the fluids and metals required to form the observed ore deposits. Therefore, the majority of the ore-forming fluids must have originated from the magmas that crystallized at 12 ± 1 km depth. The ore deposits, conversely, formed at ~5-km paleodepth. This implies that most of the mineralizing fluids traveled an average vertical distance of ~7 km from their magmatic source to the eventual site of ore precipitation. The relatively unaltered nature and low veining degree of deeper parts of mineralized porphyry dikes and stocks suggest that the fluid transport through these intrusive bodies occurred mostly at near-solidus conditions by means of fluid percolation along grain boundaries. In summary, our results suggest that (1) a large, upper crustal pluton exists ~7 km beneath the Santa Rita and Hanover-Fierro deposits; (2) abundant phenocryst crystallization occurred at this depth level; and (3) this pluton was the main source for the exsolution of ore-forming fluids. However, the investigated rocks have elevated whole-rock Sr/Y ratios, indicating magma fractionation at deep crustal levels. As a result, our preferred model is a combination of the two end-member models introduced above, with most magma fractionation having occurred in the deep crust and with residual, intermediate to felsic melts having ascended and accumulated at 11 to 14 km paleodepth, where they continued to crystallize with comparatively little crystal-liquid separation, before some of these magmas ascended further to shallow levels and quenched to porphyries.

New Mexico↗

USGS2025

Assimilation of reduced carbon triggers platinum alloy saturation in mafic and ultramafic magmas

It is generally observed that magmatic sulfide ores have higher ratios of Pd/Pt than the mantle-like values of their parental magmas. This discrepancy has defied simple explanation because the partitioning behavior of both elements between sulfide and silicate liquids is very similar. Assimilation of sulfur- and carbon-rich country rocks by mafic and ultramafic magmas is considered a critical, if not essential, step in the formation of magmatic base metal sulfide deposits. Although there is general consensus that the assimilation of external sulfur and carbon promotes sulfide saturation, the effect of carbon assimilation on the solubilities of platinum-group elements in natural S-bearing silicate melt has been overlooked. In this study, we investigate the variations of platinum and palladium solubilities during assimilation of graphite and methane through thermodynamic modeling, in comparison with data from an array of highly distinctive magmatic sulfide ore systems representing ages from Archean to Paleozoic, melt compositions from komatiite to basalt, and magmatic settings including lavas, hypabyssal intrusions, plutonic continental arc roots, and plutonic layered intrusions, namely: Raglan, Norilsk-Talnakh, Lac des Iles, and the J-M Reef of the Stillwater Complex. We model assimilation-fractional crystallization processes to estimate the reduction of oxygen fugacity ( ⁠fO2⁠ ) of the melt due to incorporation of graphite and methane. The simulations show that although Pd remains highly soluble during the progressive assimilation of reduced carbon, Pt solubility decreases significantly as the silicate melt becomes increasingly reduced. With less than 8 % of sediment assimilation, Pt alloy may saturate and then deviate from sulfide-undersaturated silicate melts, concomitantly increasing the Pd/Pt value of the remaining melts of the Raglan and Norilsk-Talnakh systems. For the Lac des Iles and Stillwater systems, a higher extent of assimilation is needed to reach Pt saturation because of the relatively carbon-poor nature of the lower crustal rocks. The assimilation of methane volatiles is shown to be more effective than graphite assimilation, and it provides a pathway to Pt alloy fractionation in the absence of detectable amounts of bulk host-rock assimilation. High Pd/Pt values have been documented in many world-class magmatic sulfide deposits whose parental magmas have demonstrably experienced crustal contamination. Our model suggests that although anomalous Pd/Pt values may be explained by other mechanisms such as incongruent melting of preexisting sulfide or differences in the diffusivities of the metals within achieving equilibration, the assimilation of graphite or methane may play an important role in the global occurrence of magmatic sulfide ores with elevated Pd/Pt values.

Economic Geology↗