Search USGS⌕ Search

SEARCH · Search USGS

Results for “Developments in Sedimentology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

118 records · Page 7Linked to original sources
USGS2005

Stratigraphy and sedimentology of a dry to wet eolian depositional system, Burns formation, Meridiani Planum, Mars

Outcrop exposures of sedimentary rocks at the Opportunity landing site (Meridiani Planum) form a set of genetically related strata defined here informally as the Burns formation. This formation can be subdivided into lower, middle, and upper units which, respectively, represent eolian dune, eolian sand sheet, and mixed eolian sand sheet and interdune facies associations. Collectively, these three units are at least 7 m thick and define a “wetting-upward” succession which records a progressive increase in the influence of groundwater and, ultimately, surface water in controlling primary depositional processes. The Burns lower unit is interpreted as a dry dune field (though grain composition indicates an evaporitic source), whose preserved record of large-scale cross-bedded sandstones indicates either superimposed bedforms of variable size or reactivation of lee-side slip faces by episodic (possibly seasonal) changes in wind direction. The boundary between the lower and middle units is a significant eolian deflation surface. This surface is interpreted to record eolian erosion down to the capillary fringe of the water table, where increased resistance to wind-induced erosion was promoted by increased sediment cohesiveness in the capillary fringe. The overlying Burns middle unit is characterized by fine-scale planar-laminated to low-angle-stratified sandstones. These sandstones accumulated during lateral migration of eolian impact ripples over the flat to gently undulating sand sheet surface. In terrestrial settings, sand sheets may form an intermediate environment between dune fields and interdune or playa surfaces. The contact between the middle and upper units of the Burns formation is interpreted as a diagenetic front, where recrystallization in the phreatic or capillary zones may have occurred. The upper unit of the Burns formation contains a mixture of sand sheet facies and interdune facies. Interdune facies include wavy bedding, irregular lamination with convolute bedding and possible small tepee or salt-ridge structures, and cm-scale festoon cross-lamination indicative of shallow subaqueous flows marked by current velocities of a few tens of cm/s. Most likely, these currents were gravity-driven, possibly unchannelized flows resulting from the flooding of interdune/playa surfaces. However, evidence for lacustrine sedimentation, including mudstones or in situ bottom-growth evaporites, has not been observed so far at Eagle and Endurance craters. Mineralogical and elemental data indicate that the eolian sandstones of the lower and middle units, as well as the subaqueous and eolian deposits of the Burns upper unit, were derived from an evaporitic source. This indirectly points to a temporally equivalent playa where lacustrine evaporites or ground-water-generated efflorescent crusts were deflated to provide a source of sand-sized particles that were entrained to form eolian dunes and sand sheets. This process is responsible for the development of sulfate eolianites at White Sands, New Mexico, and could have provided a prolific flux of sulfate sediment at Meridiani. Though evidence for surface water in the Burns formation is mostly limited to the upper unit, the associated sulfate eolianites provide strong evidence for the critical role of groundwater in controlling sediment production and stratigraphic architecture throughout the formation.

Earth and Planetary Science Letters↗
USGS1994

The volcanic, sedimentologic, and paleolimnologic history of the Crater Lake caldera floor, Oregon:Evidence for small caldera evolution

Apparent phreatic explosion craters, caldera-floor volcanic cones, and geothermal features outline a ring fracture zone along which Mount Mazama collapsed to form the Crater Lake caldera during its climactic eruption about 6,850 yr B.P. Within a few years, subaerial deposits infilled the phreatic craters and then formed a thick wedge (10-20 m) of mass flow deposits shed from caldera walls. Intense volcanic activity (phreatic explosions, subaerial flows, and hydrothermal venting) occurred during this early postcaldera stage, and a central platform of subaerial andesite flows and scoria formed on the caldera floor. Radiocarbon ages suggest that deposition of Iacustrine hemipelagic sediment began on the central platform about 150 yr after the caldera collapse. This is the minimum time to fill the lake halfway with water and cover the platform assuming present hydrologic conditions of precipitation and evaporation but with negligible leakage of lake water. Wizard Island formed during the final part of the 300-yr lake-filling period as shown by its (1) upper subaerial lava flows from 0 to -70 m below present water level and lower subaqueous lava flows from -70 to -500 m and by (2) lacustrine turbidite sand derived from Wizard Island that was deposited on the central platform about 350 yr after the caldera collapse. Pollen stratigraphy indicates that the warm and dry climate of middle Holocene time correlates with the early lake deposits. Diatom stratigraphy also suggests a more thermally stratified and phosphate-rich environment associated respectively with this climate and greater hydrothermal activity during the early lake history. Apparent coarse-grained and thick-bedded turbidites of the early lake beds were deposited throughout northwest, southwest, and eastern basins during the time that volcanic and seismic activity formed the subaqueous Wizard Island, Merriam Cone, and rhyodacite dome. The last known postcaldera volcanic activity produced a subaqueous rhyodacite ash bed and dome about 4,240 yr B.P. The late lake beds with base-of-slope aprons and thin, fine-grained basin-plain turbidites were deposited during the volcanically quiescent period of the past 4,000 yr. Deposits in Crater Lake and on similar caldera floors suggest that four stages characterize the postcaldera evolution of smaller (≤10 km in diameter) terrestrial caldera lake floors: (1) initial-stage caldera collapse forms the ring fracture zone that controls location of the main volcanic eruptive centers and sedimentary basin depocenters on the caldera floor; (2) early-stage subaerial sedimentation rapidly fills ring-fracture depressions and constructs basin-floor debris fans from calderawall landslides; (3) first-stage subaqueous sedimentation deposits thick flat-lying lake turbidites throughout basins, while a thin blanket of hemipelagic sediment covers volcanic edifices that continue to form concurrently with lake sedimentation; and (4) second-stage subaqueous sedimentation after the waning of major volcanic activity and the earlier periods of most rapid sedimentation develops small sili-ciclastic basin base-of-slope turbidite aprons and central basin plains. Renewed volcanic activity or lake destruction could cause part or all of the cycle to repeat.

Oregon↗
USGS2009

Fine-scale relief related to late holocene channel shifting within the floor of the upper Redondo Fan, offshore Southern California

Erosional and depositional bedforms have been imaged at outcrop scale in the upper Redondo Fan, in the San Pedro Basin of offshore Southern California in ≥600 m water depths, using an Autonomous Underwater Vehicle developed by the Monterey Bay Aquarium Research Institute. The Autonomous Underwater Vehicle is equipped with multibeam and chirp sub-bottom sonars. Sampling and photographic images using the Monterey Bay Aquarium Research Institute Remotely Operated Vehicle Tiburon provide groundtruth for the Autonomous Underwater Vehicle survey. The 0·3 m vertical and 1·5 m lateral bathymetric resolution and 0·1 m sub-bottom profile resolution provide unprecedented detail of bedform morphology and structure. Multiple channels within the Redondo Fan have been active at different times during the Late Holocene (0 to 3000 yr bp ). The currently active channel extending from Redondo Canyon makes an abrupt 90° turn at the canyon mouth before resuming a south-easterly course along the east side of the Redondo Fan. This channel is floored by sand and characterized by small steps generally <1 m in relief, spaced 10 to 80 m in the down-channel direction. A broader channel complex lies along the western side of the fan valley that was last active more than 850 years ago. Two distinct trains of large scours, with widths ranging from tens to a few hundred metres and depths of 20 m, occur on the floor of the western channel complex, which has a thin mud drape. If observed in cross-section only, these large scours would probably be misidentified as the thalweg of an active channel.

California↗
USGS2006

Evolution of a Holocene delta driven by episodic sediment delivery and coseismic deformation, Puget Sound, Washington, USA

Episodic, large-volume pulses of volcaniclastic sediment and coseismic subsidence of the coast have influenced the development of a late Holocene delta at southern Puget Sound. Multibeam bathymetry, ground-penetrating radar (GPR) and vibracores were used to investigate the morphologic and stratigraphic evolution of the Nisqually River delta. Two fluvial–deltaic facies are recognized on the basis of GPR data and sedimentary characteristics in cores, which suggest partial emplacement from sediment-rich floods that originated on Mount Rainier. Facies S consists of stacked, sheet-like deposits of andesitic sand up to 4 m thick that are continuous across the entire width of the delta. Flat-lying, highly reflective surfaces separate the sand sheets and comprise important facies boundaries. Beds of massive, pumice- and charcoal-rich sand overlie one of the buried surfaces. Organic-rich material from that surface, beneath the massive sand, yielded a radiocarbon age that is time-correlative with a series of known eruptive events that generated lahars in the upper Nisqually River valley. Facies CF consists of linear sandbodies or palaeochannels incised into facies S on the lower delta plain. Radiocarbon ages of wood fragments in the sandy channel-fill deposits also correlate in time to lahar deposits in upstream areas. Intrusive, sand-filled dikes and sills indicate liquefaction caused by post-depositional ground shaking related to earthquakes. Continued progradation of the delta into Puget Sound is currently balanced by tidal-current reworking, which redistributes sediment into large fields of ebb- and flood-oriented bedforms.

Washington↗
USGS2020

A model for the growth and development of wave-dominated deltas fed by small mountainous rivers: Insights from the Elwha River delta, Washington

Observations from ground-penetrating radar, sediment cores, elevation surveys and aerial imagery are used to understand the development of the Elwha River delta in north-western Washington, USA, which prograded as a result of two dam removals in late 2011. Swash-bar, foreshore and swale depositional elements are recognized within ground-penetrating radar profiles and sediment cores. A model for the growth and development of small mountainous river wave-dominated deltas is proposed based on observation of both the fluvial and deltaic settings. If enough sediment is available in the fluvial system, mouth-bars form after higher than average river discharge events, creating a large platform seaward of the subaqueous delta plain. Swash-bars form concurrently or within a month of mouth-bar deposition as a result of wave action. Fair-weather waves drive swash-bar migration landward and in the direction of littoral drift. The signature of swash-bar welding to the shoreline is landward-dipping reflections, as a result of overwash processes and slipface migration. However, most swash-bars are eroded by the river mouth, as only 10 of the 37 swash-bars that formed between August 2011 and July 2016 survived within the Elwha River delta. The swash-bars that do survive either amalgamate onto the shoreline or an earlier deposited swash-bar, forming a single larger barrier at the delta front. In asymmetrical deltas, the signature of swash-bar welding is more likely to be preserved on the downdrift side of the delta, where formation is more likely and accommodation behind newer swash-bars preserves older deposits. On small mountainous river deltas, welded swash-bars may be more indicative of a large sediment pulse to the system, rather than large hydrological events.

Washington↗
USGS2002

Outcrop-scale acoustic facies analysis and latest Quaternary development of Hueneme and Dume submarine fans, offshore California

The uppermost Quaternary deposits of the Hueneme and Dume submarine fans in the Santa Monica Basin have been investigated using a closed-spaced grid of boomer seismic-reflection profiles, which give vertical resolution of a few tens of centimetres with acoustic penetration to 50 m. Acoustic facies integrated with geometry define six architectural elements, some with discrete subelements that are of a scale that can be recognized in outcrops of ancient turbidite systems. In the Santa Monica Basin, the relationship of these elements to fan morphology, stratigraphy and sediment source is precisely known. The width of upper Hueneme fan valley has been reduced from 5 km since the last glacial maximum to 1 km at present by construction of laterally confined sandy levees within the main valley. The middle fan comprises three main subelements: thick sand deposits at the termination of the fan valley, low-gradient sandy lobes typically 5 km long and < 10 m thick, and scoured lobes formed of alternating sand and mud beds with many erosional depressions. The site of thickest lobe sediment accumulation shifts through time, with each sand bed deposited in a previous bathymetric low (i.e. compensation cycles). The lower fan and basin plain consists of sheet-like alternations of sand and mud with shallow channels and lenses. Variations in the rate of late Quaternary sea level rise initiated changes in sediment facies distribution. At lowstand, and during the approximately 11 ka stillstand in sea level, the Hueneme Fan was fed largely by hyperpycnal flow from the Santa Clara River delta, depositing high sediment waves on the right hand levee and thick sandy lobes on the middle fan. At highstand of sea level, most turbidity currents were generated by failure of silty prodelta muds. In contrast, the smaller Dume Fan was apparently always fed from littoral drift of sand through a single-canyon point source.

Sedimentology↗
USGS2010

After a century: Revised Paleogene coal stratigraphy, correlation, and deposition, Powder River Basin, Wyoming and Montana

The stratigraphy, correlation, mapping, and depositional history of coal-bearing strata in the Paleogene Fort Union and Wasatch Formations in the Powder River Basin were mainly based on measurement and description of outcrops during the early 20th century. Subsequently, the quality and quantity of data improved with (1) exploration and development of oil, gas, and coal during the middle 20th century and (2) the onset of coalbed methane (CBM) development during the late 20th and early 21st centuries that resulted in the drilling of more than 26,000 closely spaced wells with accompanying geophysical logs. The closeness of the data control points, which average 0.5 mi (805 m) apart, made for better accuracy in the subsurface delineation and correlation of coal beds that greatly facilitated the construction of regional stratigraphic cross sections and the assessment of resources. The drillhole data show that coal beds previously mapped as merged coal zones, such as the Wyodak coal zone in the Wyoming part of the Powder River Basin, gradually thinned into several discontinuous beds and sequentially split into as many as 7 hierarchical orders westward and northward. The thinning and splitting of coal beds in these directions were accompanied by as much as a ten-fold increase in the thicknesses of sandstone-dominated intervals within the Wyodak coal zone. This probably resulted from thrust loading by the eastern front of the Bighorn uplift accompanied by vertical displacement along lineaments that caused subsidence of the western axial part of the Powder River Basin during Laramide deformation in Late Cretaceous and early Tertiary time. Accommodation space was thereby created for synsedimentary alluvial infilling that controlled thickening, thinning, splitting, pinching out, and areal distribution of coal beds. Equally important was differential subsidence between this main accommodation space and adjoining areas, which influenced the overlapping, for example, of the Dietz coal zone in Montana, over the Wyodak coal zone in Wyoming. Correlation in a circular track of the Wyodak coal zone in the southern part of the basin also demonstrates overlapping with lower coal zones. Recognition of this stratigraphic relationship has led to revision of the correlations and nomenclature of coal beds because of inconsistency within these zones as well as those below and above them, which have long been subjects of controversy. Also, it significantly changes the traditional coal bed-to-bed correlations, and estimates of coal and coalbed methane resources of these coal zones due to thinning and pinching out of beds. More notably, thickness isopach, orientation, and distribution of the merged Wyodak coal bodies in the south-southeast part of the basin suggest that differential movement of lineament zones active during the Cretaceous was not a major influence on coal accumulation during the Paleocene. Improved knowledge of alluvial depositional environments as influenced by external and internal paleotectonic conditions within the Powder River Basin permits more accurate correlation, mapping, and resource estimation of the Fort Union and Wasatch coal beds. The result is a better understanding of the sedimentology of the basin infill deposits in relation to peat bog accumulation.

Montana, Wyoming↗
USGS2016

Estimating the settling velocity of bioclastic sediment using common grain-size analysis techniques

Most techniques for estimating settling velocities of natural particles have been developed for siliciclastic sediments. Therefore, to understand how these techniques apply to bioclastic environments, measured settling velocities of bioclastic sedimentary deposits sampled from a nearshore fringing reef in Western Australia were compared with settling velocities calculated using results from several common grain-size analysis techniques (sieve, laser diffraction and image analysis) and established models. The effects of sediment density and shape were also examined using a range of density values and three different models of settling velocity. Sediment density was found to have a significant effect on calculated settling velocity, causing a range in normalized root-mean-square error of up to 28%, depending upon settling velocity model and grain-size method. Accounting for particle shape reduced errors in predicted settling velocity by 3% to 6% and removed any velocity-dependent bias, which is particularly important for the fastest settling fractions. When shape was accounted for and measured density was used, normalized root-mean-square errors were 4%, 10% and 18% for laser diffraction, sieve and image analysis, respectively. The results of this study show that established models of settling velocity that account for particle shape can be used to estimate settling velocity of irregularly shaped, sand-sized bioclastic sediments from sieve, laser diffraction, or image analysis-derived measures of grain size with a limited amount of error. Collectively, these findings will allow for grain-size data measured with different methods to be accurately converted to settling velocity for comparison. This will facilitate greater understanding of the hydraulic properties of bioclastic sediment which can help to increase our general knowledge of sediment dynamics in these environments.

Sedimentology↗
USGS2001

Petrographic and geochemical evidence for the formation of primary, bacterially induced lacustrine dolomite: La Roda 'white earth' (Pliocene, Central Spain)

Upper Pliocene dolomites ('white earth') from La Roda, Spain, offer a good opportunity to evaluate the process of dolomite formation in lakes. The relatively young nature of the deposits could allow a link between dolomites precipitated in modern lake systems and those present in older lacustrine formations. The La Roda Mg-carbonates (dolomite unit) occur as a 3??5- to 4-m- thick package of poorly indurated, white, massive dolomite beds with interbedded thin deposits of porous carbonate displaying root and desiccation traces as well as local lenticular gypsum moulds. The massive dolomite beds consist mainly of loosely packed 1- to 2-??m-sized aggregates of dolomite crystals exhibiting poorly developed faces, which usually results in a subrounded morphology of the crystals. Minute rhombs of dolomite are sparse within the aggregates. Both knobbly textures and clumps of spherical bodies covering the crystal surfaces indicate that bacteria were involved in the formation of the dolomites. In addition, aggregates of euhedral dolomite crystals are usually present in some more clayey (sepiolite) interbeds. The thin porous carbonate (mostly dolomite) beds exhibit both euhedral and subrounded, bacterially induced dolomite crystals. The carbonate is mainly Ca-dolomite (51-54 mol% CaCO3), showing a low degree of ordering (degree of ordering ranges from 0??27 to 0??48). Calcite is present as a subordinate mineral in some samples. Sr, Mn and Fe contents show very low correlation coefficients with Mg/Ca ratios, whereas SiO2 and K contents are highly correlated. ??18O- and ??13C-values in dolomites range from -3??07??? to 5??40??? PDB (mean = 0??06, ?? = 1??75) and from -6??34??? to -0??39??? PDB (mean = -3??55, ?? = 1??33) respectively. Samples containing significant amounts of both dolomite and calcite do not in general show significant enrichment or depletion in 18O and 13C between the two minerals. The correlation coefficient between ??18O and ??13C for dolomite is extremely low and negative (r = -0??05), whereas it is higher and positive (r = 0??47) for calcite. The lacustrine dolomite deposit from La Roda is interpreted mainly as a result of primary precipitation of dolomite in a shallow, hydrologically closed perennial lake. The lake was supplied by highly saturated HCO3-/CO32- groundwater that leached dolomitic Mesozoic formations. Precipitation of dolomite from alkaline lake waters took place under a semi-arid to arid climate. However, according to our isotopic data, strong evaporative conditions were not required for the formation of the La Roda dolomite. A significant contribution by bacteria to the formation of the dolomites is assumed in view of both petrographic and geochemical evidence.

Sedimentology↗
USGS2020

Recent planform changes in the Upper Mississippi River

Geomorphic changes in the Upper Mississippi River (UMR) have long been a concern of river agencies charged with maintaining and restoring river habitat (GREAT 1980; Jackson et al. 1981; USFWS 1992). Large meandering alluvial rivers like the UMR are expected to constantly change and adjust their fluvial landforms within their riparian corridors as a result of the natural interaction of hydrologic processes, sediment movement, and vegetation over time. However, present geomorphic changes in the UMR reflect altered hydrologic, hydraulic, and sediment conditions caused by regulated flows, constructed agricultural levees and navigation dams, altered land use in the watershed, and climate change. Levees reduce lateral hydrologic and sediment connectivity between channels and floodplains on many tributaries and on the Mississippi River downstream of Pool 13. Between each of the dams are a repeating series of landforms associated with tailwater, intermediate, and impounded conditions. The dams maintain a minimum water level, thus creating many off-channel areas that act as sediment traps. Whereas high-head dams cut off sedimentological connectivity longitudinally through the river corridor (Skalak et al., 2013), low head dams on the UMR only slightly altered transport longitudinally. Deltaic-like sedimentation can be common in the impounded sections of dammed rivers. Erosion of relict land surfaces that remained above the raised impounded water levels has been the dominant change in UMR impounded sections due to increased wind fetch leading to increased wave action. Even though upland sources of sediment from tributaries have decreased over the middle to late 20th century, increased annual precipitation, the interplay of increased variability in flood magnitudes from year to year, and more fall and winter flooding have likely changed erosion and sedimentation patterns in the UMR (Belby, et al., 2019). Paradoxically, monitoring and research indicates that the concentration of some water column constituents like total suspended solids and phosphorous has decreased during the 1991 to 2014 time period (Kreiling and Houser, 2016). In areas prone to increased sedimentation, bed elevations rise and thereby water depths are reduced at a given discharge, resulting in loss of fish habitat. Sediment deposition or erosion further influences water exchange rates between main channel and off-channel areas in the river by increasing resistance in connecting channels or enlarging existing connecting channels. Water depth and water exchange rates are the most prominent features describing habitat quality in the UMR (De Jager et al. 2018), and in some cases, the trajectory of planform change from heightened deposition promises to threaten deep backwater habitats particularly important for overwintering fish. Although information on the rate of vertical change in bed elevation is needed for a complete assessment of geomorphic change associated with the loss of deep backwater habitats, mapping planform changes over time (i.e., lateral changes between the land-water boundary) provide needed information on the location, potential cause, and progressive direction of deposition, especially in the mid sections between dams where deltaic processes are the most pronounced. Several types of planform changes have been observed and identified as concerns. For example, island loss in the large impounded areas of the upper part of the UMR was one of the concerns identified by river managers in the 1980s and 90s, and subsequently island construction became a common form of restoration implemented by the Upper Mississippi River Restoration (UMRR) Program (USACE 2012). Other subtler planform changes, such as channel bank erosion and delta formation in backwaters, are perceived to be important, but have largely gone unquantified. A systemwide reconnaissance of the UMR and IWW conducted in 1998 concluded that 14-percent of the river banks were eroding (Nakato and Anderson 1998). However, stabilization of existing river banks has never been widely pursued as a restoration measure, due to the high cost and uncertain benefits. Delta formation reduces the amount of backwater habitat; however, the deltas maintain and create a mix of riparian and aquatic habitats, and that is generally considered to be beneficial for wildlife and fish. If recent hydrologic trends of more frequent and longer duration flood events continue, a better understanding of planform changes can help in describing past changes, and then be used to forecast potential future trajectories of change. If UMR resource managers determine that past and forecasted conditions are undesirable, then UMRR projects could be identified and prioritized to address those concerns. Vegetative cover associations with landform changes have been used to detect and quantify planform changes in many rivers (Johnson 1985; Hiatt 2015; Volte et al. 2015). Freyer and Jefferson (2013) completed such a study in Pool 6 of the UMR using the landcover data from 12 dates over a 115-yr period, including the 1989, 2000, and 2010/2011 landcover/use (LCU) data from the UMRR Program. Planform change detected over the last 20 years represented by the UMRR Program data best reflect present-day geomorphic patterns, rates and processes. Changes occurring prior to dam construction and changes occurring soon after dam construction are likely not the same as those happening now, 50-70 years after dam construction and creation of the impoundments (McHenry et al., 1984; Bhowmik and Adams, 1986; WEST Consultants, 2000). The LCU data from each of the 1989, 2000, and 2010/2011 imagery was developed using similar methods and is available in a Geographical Information System (GIS) for the entire UMR and therefore provides the opportunity for a more comprehensive planform change analysis. This study used GIS overlays of LCU classes to map and quantify changes in planform features over two periods, looking specifically for depositional areas where terrestrial and wetland vegetation expanded at the expense of open water. The land expansion was grouped into four possible process-based types common in large floodplain rivers, some following that used by Lewin et al. (2017). The four types include: crevasse deltas emanating from a breach from a main channel through a natural levee or narrow floodplain into backwaters (crevasse deltas), tributary deltas expanding into backwaters (tributary deltas), deltaic bars at the upstream end of impoundments (impounded deltas), and linear-like bars extending from the downstream ends of narrow levees and remnant floodplains (bar-tail limbs). The methods deployed for change detection addressed possible errors from a variety of sources.

Illinois, Iowa, Minnesota, Missouri, Wisconsin↗