Estimating the settling velocity of bioclastic sediment using common grain-size analysis techniques

Michael V. W. Cuttler; Ryan J. Lowe; James L. Falter; Daniel D. Buscombe

doi:10.1111/sed.12338

Home/Archive/USGS

USGS · 70179447

Estimating the settling velocity of bioclastic sediment using common grain-size analysis techniques

Michael V. W. Cuttler·Ryan J. Lowe·James L. Falter·Daniel D. Buscombe

View original source ↗Export metadata ↓

Abstract

Most techniques for estimating settling velocities of natural particles have been developed for siliciclastic sediments. Therefore, to understand how these techniques apply to bioclastic environments, measured settling velocities of bioclastic sedimentary deposits sampled from a nearshore fringing reef in Western Australia were compared with settling velocities calculated using results from several common grain-size analysis techniques (sieve, laser diffraction and image analysis) and established models. The effects of sediment density and shape were also examined using a range of density values and three different models of settling velocity. Sediment density was found to have a significant effect on calculated settling velocity, causing a range in normalized root-mean-square error of up to 28%, depending upon settling velocity model and grain-size method. Accounting for particle shape reduced errors in predicted settling velocity by 3% to 6% and removed any velocity-dependent bias, which is particularly important for the fastest settling fractions. When shape was accounted for and measured density was used, normalized root-mean-square errors were 4%, 10% and 18% for laser diffraction, sieve and image analysis, respectively. The results of this study show that established models of settling velocity that account for particle shape can be used to estimate settling velocity of irregularly shaped, sand-sized bioclastic sediments from sieve, laser diffraction, or image analysis-derived measures of grain size with a limited amount of error. Collectively, these findings will allow for grain-size data measured with different methods to be accurately converted to settling velocity for comparison. This will facilitate greater understanding of the hydraulic properties of bioclastic sediment which can help to increase our general knowledge of sediment dynamics in these environments.

Explore related subjects

Sedimentology Article

Keep this discovery

Explore connections, maps & timelines

BibTeX RIS

Michael V. W. Cuttler, Ryan J. Lowe, James L. Falter, Daniel D. Buscombe. 2016-12-29. Estimating the settling velocity of bioclastic sediment using common grain-size analysis techniques. https://doi.org/10.1111/sed.12338

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

USGS2023

Spatial distribution and variability of lobe facies in a large sand-rich submarine fan system: Neoproterozoic Zerrissene Group, Namibia

The deposits of the upper Neoproterozoic Zerrissene Group of central-western Namibia represent a large siliciclastic deep-water depositional system that showcases the intricacies of facies and architectural relationships from bed-scale to fan-system-scale. The lack of vegetation in the Namib Desert and regular east–west repetition of folded stratigraphy (reflecting ca 50% tectonic shortening) provides quasi-three-dimensional exposure over a current area of approximately 2700 square kilometres. The Brak River Formation, the middle sand-rich unit of the Zerrissene Group, consists of nearly 600 m of strata exposed in multiple parallel continuous outcrops up to ca 10 km in length and oriented obliquely to depositional dip. Ten stratigraphic sections are correlated ca 32 km ( ca 64 km restored) across the basin and offer exposure comparable in scale to modern submarine fans. Six sedimentary facies are identified and grouped into four facies associations that represent axial-to-marginal portions of deep-water lobes in an unconfined submarine fan system. Spatial facies patterns, regional thickness variations, and palaeocurrents indicate that Brak River Formation sediments were transported primarily from the north to south–south-west through a trough-like basin, and deposited within an unconfined basin plain at the junction of the Adamastor and Khomas oceans. The unique outcrop exposure and extent permits the documentation of system-scale architecture and basin configuration of the Brak River submarine fan system. A transition from the sand-rich lower Brak River Formation to more intercalated mudstone-dominated intervals in the middle and upper Brak River Formation is interpreted to record a change from aggradational to compensational stacking of lobe deposits. This records the evolution of a large submarine fan as it filled the subtle seafloor topography and became less confined at the system-scale. The documentation of these deep-water deposits from centimetre-scale to basin-scale provides a new model for a system with extensive long-distance transport of sand-rich sediment gravity flows to submarine lobes without apparent channelization.

Sedimentology↗

USGS2022

Coupling near-surface geomorphology with mangrove community diversity at the estuarine scale: A case study at Dongzhaigang Bay, China

Coastal wetlands are key features of the Earth’s surface and are characterized by a diverse array of coupled geomorphological and biological processes. However, the links between the distribution of biodiversity (e.g., species and structural diversity) and the formation of coastal geomorphology are not well understood on a landscape scale most useful to coastal zone managers. This study describes the relationship between select geomorphological and biological mangrove community features (i.e., species composition and functional root type) in a landscape-distributed coastal zone of Dongzhaigang Bay, Northeastern Hainan Island, China. A total of 11 mangrove species and five functional aerial root types were encountered, with the location of species by root types being controlled by the elevation of the soil surface. Plank roots, prop roots, and pneumatophores occupied the lowest intertidal elevations, while knee roots and fibrous roots of the mangrove fern, Acrostichum aureum , preferred the highest intertidal elevations. Surface sediment deposition in areas with mangroves was greater than deposition in non-mangrove forest zones, establishing an important biological mechanism for this large-area response as surface erosion/compaction was also more prominent within mangrove roots. Indeed, functional root type influenced the magnitude of deposition, erosion, and compaction, with knee roots and pneumatophores being more effective in promoting deposition and preventing surface erosion/compaction than prop roots. These results indicate a potential role for vegetation type (especially functional root type) to influence coastal geomorphological processes at large landscape scales. While soil surface elevation is correlated to the distribution of mangrove species and functional root types, a significant feedback exists between elevation change and the capacity of those root types to influence coastal geomorphological differentiation within sustainable intertidal elevations. An enhanced understanding of geomorphological development, mangrove species distribution, and functional root type may improve management to support nature-based solutions that adjust more effectively to sea-level rise through feedbacks.

Houpai, Sanjiang, Tashi↗

USGS2022

Unravelling a 2300 year long sedimentary record of megathrust and intraslab earthquakes in proglacial Skilak Lake, south-central Alaska

Seismic hazards in subduction settings typically arise from megathrust, intraslab and crustal earthquake sources. Despite the frequent occurrence of intraslab earthquakes in subduction zones and their potential threat to communities, their long-term recurrence behaviour is barely studied. Sedimentary sequences in lakes may register ground shaking from different seismic sources. This study investigates two long sediment cores (13 m and 16 m) from Skilak Lake, a proglacial lake in south-central Alaska, to evaluate whether different seismic sources leave a distinct imprint. The sedimentary record shows a continuously varved sediment sequence, occasionally interrupted by turbidites, slump deposits and tephra beds. Turbidites and slump deposits were objectively identified using a statistical outlier analysis on varve thickness. The earthquake origin of these deposits was ascertained by resemblance with deposits induced by instrumentally recorded earthquakes (for example, 1964 ce M w 9.2 megathrust and 1954 ce M w 6.4 intraslab earthquakes) and correlation with multiple coeval landslide deposits on sub-bottom profiles. The Skilak Lake record chronicles 19 earthquakes with moderate to very high confidence level in the past 1350 years. The sedimentary evidence of instrumentally-recorded intraslab and megathrust earthquakes within the past 70 years demonstrates that not only megathrust earthquakes, but also past intraslab events are recorded. Although reported seismic intensities at Skilak Lake are comparable for the 1964 ce megathrust and the 1954 ce intraslab earthquakes, the long duration and low frequency content of seismic ground motion during megathrust earthquakes facilitate the triggering of multiple, voluminous landslides and the generation of megaturbidites. In contrast, the shorter duration and higher frequency source spectrum of intraslab earthquakes may only induce surficial slope remobilization and the generation of thinner turbidites. This study demonstrates that the sedimentary record of Skilak Lake has the potential to decipher multiple seismic sources, which opens possibilities for a comprehensive seismic hazard analysis for south-central Alaska.

Alaska↗