Search USGS⌕ Search

SEARCH · Search USGS

Results for “Advances in Geophysics”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7Linked to original sources
USGS2012

Liquefaction and foundation failure of Chevron oil and gasoline tanks at Moss Landing, California

Liquefaction of gray, coarse‐ to medium‐grained, esturine sand during the October 17, 1989 Loma Prieta (Ms=7.1) earthquake led to foundation failures of oil and tanks at the Chevron Marine Station at Moss Landing located about 25 km south‐southeast of the epicenter. Differential settlement of the foundations resulted in 1° to 6° of the tanks towards one another and an associated 2° to 7° inclination of tank piping. In addition, sand was vented around the bases of the tanks that contained the most oil and adjacent cracks. Liquefaction and related ground failure was not restricted to the vicinity of the Chevron tanks but was a widespread phenomenon at Moss Landing. Analysis of geological and geotechnical data at sites such as the Chevron Marine Station will serve to check and to advance current methods of assessing liquefaction potential at a site and of mapping liquefaction hazard on a regional scale.

California↗
USGS2007

Geosoft eXecutables (GX's) Developed by the U.S. Geological Survey, Version 2.0, with Notes on GX Development from Fortran Code

Introduction Geosoft executables (GX's) are custom software modules for use with the Geosoft Oasis montaj geophysical data processing system, which currently runs under the Microsoft Windows 2000 or XP operating systems. The U.S. Geological Survey (USGS) uses Oasis montaj primarily for the processing and display of airborne geophysical data. The ability to add custom software modules to the Oasis montaj system is a feature employed by the USGS in order to take advantage of the large number of geophysical algorithms developed by the USGS during the past half century. This main part of this report, along with Appendix 1, describes Version 2.0 GX's developed by the USGS or specifically for the USGS by contractors. These GX's perform both basic and advanced operations. Version 1.0 GX's developed by the USGS were described by Phillips and others (2003), and are included in Version 2.0. Appendix 1 contains the help files for the individual GX's. Appendix 2 describes the new method that was used to create the compiled GX files, starting from legacy Fortran source code. Although the new method shares many steps with the approach presented in the Geosoft GX Developer manual, it differs from that approach in that it uses free, open-source Fortran and C compilers and avoids all Fortran-to-C conversion.

Open-File Report↗
USGS2010

Volcanic hazards and their mitigation: progress and problems

At the beginning of the twentieth century, volcanology began to emerge as a modern science as a result of increased interest in eruptive phenomena following some of the worst volcanic disasters in recorded history: Krakatau (Indonesia) in 1883 and Mont Pelée (Martinique), Soufrière (St. Vincent), and Santa María (Guatemala) in 1902. Volcanology is again experiencing a period of heightened public awareness and scientific growth in the 1980s, the worst period since 1902 in terms of volcanic disasters and crises. A review of hazards mitigation approaches and techniques indicates that significant advances have been made in hazards assessment, volcano monitoring, and eruption forecasting. For example, the remarkable accuracy of the predictions of dome-building events at Mount St. Helens since June 1980 is unprecedented. Yet a predictive capability for more voluminous and explosive eruptions still has not been achieved. Studies of magma-induced seismicity and ground deformation continue to provide the most systematic and reliable data for early detection of precursors to eruptions and shallow intrusions. In addition, some other geophysical monitoring techniques and geochemical methods have been refined and are being more widely applied and tested. Comparison of the four major volcanic disasters of the 1980s (Mount St. Helens, U.S.A. (1980), El Chichón, Mexico (1982); Galunggung, Indonesia (1982); and Nevado del Ruíz, Colombia (1985) illustrates the importance of predisaster geoscience studies, volcanic hazards assessments, volcano monitoring, contingency planning, and effective communications between scientists and authorities. The death toll (>22,000) from the Ruíz catastrophe probably could have been greatly reduced; the reasons for the tragically ineffective implementation of evacuation measures are still unclear and puzzling in view of the fact that sufficient warnings were given. The most pressing problem in the mitigation of volcanic and associated hazards on a global scale is that most of the world's dangerous volcanoes are in densely populated countries that lack the economic and scientific resources or the political will to adequately study and monitor them. This problem afflicts both developed and developing countries, but it is especially acute for the latter. The greatest advances in volcanic hazards mitigation in the near future are most likely to be achieved by wider application of existing technology to poorly understood and studied volcanoes, rather than by refinements or new discoveries in technology alone.

Reviews of Geophysics↗
USGS2024

Influence of inherited structure on flexural extension in foreland basin systems: Evidence from the northern Arkoma basin and southern Ozark dome, USA

Extensional faults are key components of foreland basin systems. They form within the upper crust in response to flexure of the lithosphere and accommodate subsidence within the foredeep and forebulge depozones. Such faults are excellent proxies for orogenic system evolution and control the distribution of natural resources and hazards. However, the spatiotemporal evolution of flexural extension has not been documented previously at a regional scale, thereby limiting our understanding of underlying geodynamic controls. Here, we resolve late Paleozoic flexural extension in the northern Arkoma basin and southern Ozark dome, USA. We synthesize a large database of previous mapping, existing research, subsurface data, and geophysical data into 3D geologic and 2D kinematic models. Mesh surfaces representing several key horizons from the Carboniferous Period (ca. 335-306 Ma) were constructed. These surfaces were built from oil and gas well tops (n = ∼10,000) and surface geologic map contacts using an advanced kriging method. The mesh surfaces are offset by a complex 3D fault network, allowing detailed analysis of along-strike and down-dip variations in fault displacement. Analysis of the 3D model reveals a regular and repeated fault segmentation pattern wherein E -W striking, left- and foreland-stepping en échelon normal faults are segmented by inherited NE striking basement faults. Maximum vertical separation along the E -W normal faults is generally focused between the inherited NE-trending faults. This suggests that the inherited basement faults delocalized extensional strain during late Paleozoic normal faulting. Maximum vertical separation and fault localization may correlate to areas with high-amplitude positive magnetic anomalies interpreted as Mesoproterozoic granitic rocks. Speculative covariance of magnetic anomalies and fault displacements implies that the relatively strong basement granite concentrated stress, leading to localized faulting within the relatively thin sedimentary cover. Lastly, we show that flexural extension migrated southeast to northwest from the Chesterian-Morrowan (ca. 335-319 Ma) to the Desmoinesian (ca. 306 Ma). The migratory flexural extension may be explained by diachronous loading during Pangean assembly, or by synchronous loading but variable load compensation due to inherent factors.

Arkansas, Oklahoma↗
USGS2012

Applications of mineral surface chemistry to environmental problems

Environmental surface chemistry involves processes that occur at the interface between the regolith, hydrosphere and atmosphere. The more limited scope of the present review addresses natural and anthropogenically-induced inorganic geochemical reactions between solutes in surface and ground waters and soil and aquifer substrates. Important surficial reactions include sorption, ion exchange, dissolution, precipitation and heterogeneous oxidation/reduction processes occurring at the solid/aqueous interface. Recent research advances in this field have addressed, both directly and indirectly, societal issues related to water quality, pollution, biogeochemical cycling, nutrient budgets and chemical weathering related to long term global climate change. This review will include recent advances in the fundamental and theoretical understanding of these surficial processes, breakthroughs in experimental and instrumental surface characterization, and development of methodologies for field applications.

Reviews of Geophysics↗
USGS2020

Volcanological applications of unoccupied aircraft systems (UAS): Developments, strategies, and future challenges

Unoccupied aircraft systems (UAS) are developing into fundamental tools for tackling the grand challenges in volcanology; here, we review the systems used and their diverse applications. UAS can typically provide image and topographic data at two orders of magnitude better spatial resolution than space-based remote sensing, and close-range observations at temporal resolutions down to those of video frame rates. Responsive deployments facilitate dense time-series measurements, unique opportunities for geophysical surveys, sample collection from hostile environments such as volcanic plumes and crater lakes, and emergency deployment of ground-based sensors (and robots) into hazardous regions. UAS have already been used to support hazard management and decision-makers during eruptive crises. As technologies advance, increased system capabilities, autonomy and availability, supported by more diverse and lighter-weight sensors, will offer unparalleled potential for hazard monitoring. UAS are expected to provide opportunities for pivotal advances in our understanding of complex physical and chemical volcanic processes.

Volcanica↗
USGS2008

Magnetic monitoring of earth and space

For centuries, navigators of the world’s oceans have been familiar with an effect of Earth’s magnetic field: It imparts a directional preference to the needle of a compass. Although in some settings magnetic orientation remains important, the modern science of geomagnetismhas emerged from its romantic nautical origins and developed into a subject of great depth and diversity. The geomagnetic field is used to explore the dynamics of Earth’s interior and its surrounding space environment, and geomagnetic data are used for geophysical mapping, mineral exploration, risk mitigation, and other practical applications. A global distribution of ground-based magnetic observatories supports those pursuits by providing accurate records of the magnetic-field direction and intensity at fixed locations and over long periods of time. Magnetic observatories were first established in the early 19th century in response to the influence of Alexander von Humboldt and Carl Friedrich Gauss. Since then, magnetic measurement has advanced significantly, progressing from simple visual readings of magnetic survey instruments to include automatic photographic measurement and modern electronic acquisition. To satisfy the needs of the scientific community, observatories are being upgraded to collect data that meet ever more stringent standards, to achieve higher acquisition frequencies, and to disseminate data in real time. To appreciate why data from magnetic observatories can be used for so many purposes, one needs only to recall that the geomagnetic field is a continuum, connecting the different parts of Earth to each other and to nearby space. Beneath our feet and above our heads, electric currents generate magnetic fields that contribute to the totality of the geomagnetic field measured at an observatory on Earth’s surface. The many physical processes that operate in each geophysical domain give rise to a complicated field that exhibits a wide variety of time-dependent behavior. In this article I review the status of the global community of magnetic observatories, show how Earth and space can be monitored for purposes of scientific understanding and practical application, and highlight the role played by magnetic observatories in the history of geomagnetism research.

Physics Today↗
USGS2012

John B. "Jack" Townshend (1927-2012)

Jack Townshend, geophysicist and dedicated public servant, died on 13 August 2012 in Fairbanks, Alaska. He was 85. Jack's career with the federal government, most of it with the national magnetic observatory program, spanned more than six solar cycles of time, and he retired only days before his death. The duration of Jack's career encompassed an important period in the history of the advancement of our understanding of the Earth. Jack's career of contributions, his life, and his personality are worthy of retrospective celebration.

Eos, Transactions, American Geophysical Union↗
USGS2007

Pāhoehoe flow cooling, discharge, and coverage rates from thermal image chronometry

Theoretically- and empirically-derived cooling rates for active pāhoehoe lava flows show that surface cooling is controlled by conductive heat loss through a crust that is thickening with the square root of time. The model is based on a linear relationship that links log ( time ) with surface cooling. This predictable cooling behavior can be used assess the age of recently emplaced sheet flows from their surface temperatures. Using a single thermal image, or image mosaic, this allows quantification of the variation in areal coverage rates and lava discharge rates over 48 hour periods prior to image capture. For pāhoehoe sheet flow at Kīlauea (Hawai`i) this gives coverage rates of 1–5 m 2 /min at discharge rates of 0.01–0.05 m 3 /s, increasing to ∼40 m 2 /min at 0.4–0.5 m 3 /s. Our thermal chronometry approach represents a quick and easy method of tracking flow advance over a three-day period using a single, thermal snap-shot.

Hawaii↗
USGS1994

Triaxial testing of Lopez Fault gouge at 150 MPa mean effective stress

Triaxial compression experiments were performed on samples of natural granular fault gouge from the Lopez Fault in Southern California. This material consists primarily of quartz and has a self-similar grain size distribution thought to result from natural cataclasis. The experiments were performed at a constant mean effective stress of 150 MPa, to expose the volumetric strains associated with shear failure. The failure strength is parameterized by the coefficient of internal friction ??, based on the Mohr-Coulomb failure criterion. Samples of remoulded Lopez gouge have internal friction ??=0.6??0.02. In experiments where the ends of the sample are constrained to remain axially aligned, suppressing strain localisation, the sample compacts before failure and dilates persistently after failure. In experiments where one end of the sample is free to move laterally, the strain localises to a single oblique fault at around the point of failure; some dilation occurs but does not persist. A comparison of these experiments suggests that dilation is confined to the region of shear localisation in a sample. Overconsolidated samples have slightly larger failure strengths than normally consolidated samples, and smaller axial strains are required to cause failure. A large amount of dilation occurs after failure in heavily overconsolidated samples, suggesting that dilation is occurring throughout the sample. Undisturbed samples of Lopez gouge, cored from the outcrop, have internal friction in the range ??=0.4-0.6; the upper end of this range corresponds to the value established for remoulded Lopez gouge. Some kind of natural heterogeneity within the undisturbed samples is probably responsible for their low, variable strength. In samples of simulated gouge, with a more uniform grain size, active cataclasis during axial loading leads to large amounts of compaction. Larger axial strains are required to cause failure in simulated gouge, but the failure strength is similar to that of natural Lopez gouge. Use of the Mohr-Coulomb failure criterion to interpret the results from this study, and other recent studies on intact rock and granular gouge, leads to values of ?? that depend on the loading configuration and the intact or granular state of the sample. Conceptual models are advanced to account for these descrepancies. The consequences for strain-weakening of natural faults are also discussed. ?? 1994 Birkha??user Verlag.

Pure and Applied Geophysics PAGEOPH↗
USGS2000

On rate-state and Coulomb failure models

We examine the predictions of Coulomb failure stress and rate-state frictional models. We study the change in failure time (clock advance) Δt due to stress step perturbations (i.e., coseismic static stress increases) added to "background" stressing at a constant rate (i.e., tectonic loading) at time t 0 . The predictability of Δt implies a predictable change in seismicity rate r(t)/r 0 , testable using earthquake catalogs, where r 0 is the constant rate resulting from tectonic stressing. Models of r(t)/r 0 , consistent with general properties of aftershock sequences, must predict an Omori law seismicity decay rate, a sequence duration that is less than a few percent of the mainshock cycle time and a return directly to the background rate. A Coulomb model requires that a fault remains locked during loading, that failure occur instantaneously, and that Δt is independent of t 0 . These characteristics imply an instantaneous infinite seismicity rate increase of zero duration. Numerical calculations of r(t)/r 0 for different state evolution laws show that aftershocks occur on faults extremely close to failure at the mainshock origin time, that these faults must be "Coulomb-like," and that the slip evolution law can be precluded. Real aftershock population characteristics also may constrain rate-state constitutive parameters; a may be lower than laboratory values, the stiffness may be high, and/or normal stress may be lower than lithostatic. We also compare Coulomb and rate-state models theoretically. Rate-state model fault behavior becomes more Coulomb-like as constitutive parameter a decreases relative to parameter b. This is because the slip initially decelerates, representing an initial healing of fault contacts. The deceleration is more pronounced for smaller a, more closely simulating a locked fault. Even when the rate-state Δt has Coulomb characteristics, its magnitude may differ by some constant dependent on b. In this case, a rate-state model behaves like a modified Coulomb failure model in which the failure stress threshold is lowered due to weakening, increasing the clock advance. The deviation from a non-Coulomb response also depends on the loading rate, elastic stiffness, initial conditions, and assumptions about how state evolves.

Journal of Geophysical Research B: Solid Earth↗
USGS2010

Marine magnetic anomalies

Marine magnetic data have been available for many years from all of the world's oceans, and their contribution to marine geophysics and geology is profound. These data, for example, have allowed charting the age of the ocean floor, reconstruction of the geologic history of the major ocean basins, development of a Cenozoic and Mesozoic timescale of geomagnetic reversals, and speculation on the processes of sea‐floor spreading. Research on these and similar problems actively continued during this quadrennial, but here we discuss only a few topics in which we believe the most significant advances have been made during the last four years: the source of marine magnetic anomalies, the geomagnetic time‐scale, high‐amplitude anomalies, and studies of back‐arc basins. Source of Anomalies Studies of magnetic surveys over continental areas can often be constrained by the magnetic properties of samples collected from below the survey. Until recently, model studies of marine magnetic anomalies have enjoyed the luxury of an inaccessible source. Except for samples scraped from the ocean floor by dredging [e.g., Irving , 1970] and inferences drawn from magnetic studies of ophiolite sequences [e.g., Vine and Moores , 1972], very little information was available for constraining studies of marine magnetic anomalies.

Reviews of Geophysics↗
USGS2006

Effect of tree line advance on carbon storage in NW Alaska

We investigated the size, distribution, and temporal dynamics of ecosystem carbon (C) pools in an area of recent tree line advance, northwest Alaska. Repeat aerial photographs show forest cover increased ???10% in our study area since 1949. We sampled C pools of four principal ecosystem types, tussock tundra, shrub tundra, woodland, and forest, all located on a 600-800 year old river terrace. Significant differences between ecosystem C pools, both above ground and below ground existed. Tundra sites store >22.2 kg C/m2, shrub tundra sites and woodland sites store 9.7 kg C/m2 and 14.3 kg C/m2, respectively, and forest sites store 14.4 kg C/m2. Landscape variation of total ecosystem C was primarily due to organic soil C and was secondarily due to C stored in trees. Soil C/N profiles of shrub tundra sites and woodland sites showed similarities with forest site soils at surface and tundra site soils at depth. We hypothesize that tundra systems transformed to forest systems in this area under a progression of permafrost degradation and enhanced drainage. On the basis of C pool estimates for the different ecosystem types, conversion of tundra sites to forest may have resulted in a net loss of > 7.8 kg C/m2, since aboveground C gains were more than offset by belowground C losses to decomposition in the tundra sites. Tree line advance therefore might not increase C storage in high-latitude ecosystems and thus might not, as previously suggested, act as a negative feedback to warming. Key to this hypothesis and to its projection to future climate response is the fate of soil carbon upon warming and permafrost drainage. Copyright 2006 by the American Geophysical Union.

Journal of Geophysical Research G: Biogeosciences↗
USGS2014

Glacier‐measurements in the United States

It is doubtless known to many members of the Section of Hydrology that prior to the World War there existed an International Glacier Commission (la Commission Internationale des Glaciers) whose self‐appointed task it was to gather and publish the results of all available measurements showing the annual variations in length—advance or recession—of glaciers in different parts of the world. On this Commission the United States was represented by two men who made frequent contributions to the International record.

Eos, Transactions, American Geophysical Union↗
USGS2014

Methane hydrates in nature - Current knowledge and challenges

Recognizing the importance of methane hydrate research and the need for a coordinated effort, the United States Congress enacted the Methane Hydrate Research and Development Act of 2000. At the same time, the Ministry of International Trade and Industry in Japan launched a research program to develop plans for a methane hydrate exploratory drilling project in the Nankai Trough. India, China, the Republic of Korea, and other nations also have established large methane hydrate research and development programs. Government-funded scientific research drilling expeditions and production test studies have provided a wealth of information on the occurrence of methane hydrates in nature. Numerous studies have shown that the amount of gas stored as methane hydrates in the world may exceed the volume of known organic carbon sources. However, methane hydrates represent both a scientific and technical challenge, and much remains to be learned about their characteristics and occurrence in nature. Methane hydrate research in recent years has mostly focused on: (1) documenting the geologic parameters that control the occurrence and stability of methane hydrates in nature, (2) assessing the volume of natural gas stored within various methane hydrate accumulations, (3) analyzing the production response and characteristics of methane hydrates, (4) identifying and predicting natural and induced environmental and climate impacts of natural methane hydrates, (5) analyzing the methane hydrate role as a geohazard, (6) establishing the means to detect and characterize methane hydrate accumulations using geologic and geophysical data, and (7) establishing the thermodynamic phase equilibrium properties of methane hydrates as a function of temperature, pressure, and gas composition. The U.S. Department of Energy (DOE) and the Consortium for Ocean Leadership (COL) combined their efforts in 2012 to assess the contributions that scientific drilling has made and could continue to make to advance our understanding of methane hydrates in nature. COL assembled a Methane Hydrate Project Science Team with members from academia, industry, and government. This Science Team worked with COL and DOE to develop and host the Methane Hydrate Community Workshop, which surveyed a substantial cross section of the methane hydrate research community for input on the most important research developments in our understanding of methane hydrates in nature and their potential role as an energy resource, a geohazard, and/or as an agent of global climate change. Our understanding of how methane hydrates occur in nature is still growing and evolving, and it is known with certainty that field, laboratory, and modeling studies have contributed greatly to our understanding of hydrates in nature and will continue to be a critical source of the information needed to advance our understanding of methane hydrates.

Journal of Chemical and Engineering Data↗
USGS2006

Applications of geophysical methods to volcano monitoring

The array of geophysical technologies used in volcano hazards studies - some developed originally only for volcano monitoring - ranges from satellite remote sensing including InSAR to leveling and EDM surveys, campaign and telemetered GPS networks, electronic tiltmeters and strainmeters, airborne magnetic and electromagnetic surveys, short-period and broadband seismic monitoring, even microphones tuned for infrasound. They include virtually every method used in resource exploration except large-scale seismic reflection. By “geophysical ” we include both active and passive methods as well as geodetic technologies. Volcano monitoring incorporates telemetry to handle high-bandwith cameras and broadband seismometers. Critical geophysical targets include the flux of magma in shallow reservoir and lava-tube systems, changes in active hydrothermal systems, volcanic edifice stability, and lahars. Since the eruption of Mount St. Helens in Washington State in 1980, and the eruption at Pu’u O’o in Hawai’i beginning in 1983 and still continuing, dramatic advances have occurred in monitoring technology such as “crisis GIS” and lahar modeling, InSAR interferograms, as well as gas emission geochemistry sampling, and hazards mapping and eruption predictions. The on-going eruption of Mount St. Helens has led to new monitoring technologies, including advances in broadband Wi-Fi and satellite telemetry as well as new instrumentation. Assessment of the gap between adequate monitoring and threat at the 169 potentially dangerous Holocene volcanoes shows where populations are dangerously exposed to volcanic catastrophes in the United States and its territories . This paper focuses primarily on Hawai’ian volcanoes and the northern Pacific and Cascades volcanoes. The US Geological Survey, the US National Park System, and the University of Utah cooperate in a program to monitor the huge Yellowstone volcanic system, and a separate observatory monitors the restive Long Valley caldera in collaboration with the US Forest Service.

Conference Paper↗
USGS1985

Remote sensing; a geophysical perspective

In this review of developments in the field of remote sensing from a geophysical perspective, the subject is limited to the electromagnetic spectrum from 0.4 mu m to 25 cm. Three broad energy categories are covered: solar reflected, thermal infrared, and microwave.The reflected solar region has been the most intensely studied. Photointerpretation of images from individual spectral bands or from color composites remains the most widely used method of analysis. New instrumentation and digital processing, based on analysis of laboratory and field spectra, provide significant advances that are beginning to be applied to resource exploration. Color compositing techniques have been effectively used to detect the characteristic spectral reflectance features of iron oxides and hydroxyl-bearing materials in satellite multispectral data for mapping areas of hydrothermal alteration. Airborne spectrometers can now detect individual spectral features of many minerals which are diagnostic of different stages of hydrothermal alteration. Evolution was from discrimination, based on empirical experience, to mineralogic identification and leading to quantification. Current developments also indicate new, promising extensions to vegetated terrains.Advances in thermal infrared studies are due to development of thermal models that permit mapping of physical property variations and to detection of spectral differences that provide important compositional information. Analysis techniques are still in their infancy, and thermal satellite data remain appropriate only for regional investigations.Microwave data have been acquired mainly with radar systems, which can provide very high resolution from space, but use of textural and slope information has had limited application. Long-wavelength radiation has been shown to penetrate dry materials, and this may be applicable in extremely arid regions.

Geophysics↗