Search USGS⌕ Search

SEARCH · Search USGS

Results for “Journal of Geophysical Research - Oceans”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,243 records · Page 69Linked to original sources
USGS1996

Thermal and unroofing history of a thick, tilted Basin-and-Range crustal section in the Tortilla Mountains, Arizona

We estimate here a geothermal gradient of only 17 ± 5°C km −1 for the tilted Grayback fault block in southeastern Arizona when extension began ∼25 Ma. This gradient is lower than preextension gradients estimated elsewhere in the Basin and Range, is only about 50% of typical gradients in the Basin and Range today, and needs to be accounted for in models of continental extension. The Grayback block exposes a 12-km-thick crustal section of Proterozoic and Cretaceous granitoids, which was tilted 90° during extension between 25 and 15 Ma. Zircon fission-track ages decrease structurally downward (westward) across the block and were all within a zone of partial track annealing prior to tilting and quenching. The zircon age gradient suggests that the 220°–240°C isotherm migrated downward 5–6 km during Paleogene erosion and regional cooling. Apatite fission-track ages decrease westward from ∼83 Ma in the structurally highest crystalline rocks to ∼24 Ma at ∼6-km paleodepth and then to ∼15 Ma another 6 km farther west. Track-length analysis confirms that apatites above the break in slope in age at ∼5.7-km paleodepth resided in a zone of partial annealing prior to tilting, and deeper apatites record rapid cooling upon tilting and unroofing beginning ∼25 Ma. At that time the 110 ± 10°C isotherm determined by the depth at which tracks in apatite were fully erased was at a basement paleodepth of ∼5.7 km, and the 220 ± 30°C isotherm as estimated from zircon data resided at a pretilting basement depth of ∼12.15 km. From consistent values of paleogeothermal gradient for two depth intervals we estimate the pretilt gradient was 17 ± 5°C km −1 . From 25 to 15 Ma the rotating Grayback block cooled rapidly as higher, westward moving blocks unroofed it tectonically at a rate of ∼1 km m.y. −1 .

Journal of Geophysical Research B: Solid Earth↗
USGS1996

Gravity field over the Sea of Galilee: Evidence for a composite basin along a transform fault

The Sea of Galilee (Lake Kinneret) is located at the northern portion of the Kinneret-Bet Shean basin, in the northern Dead Sea transform. Three hundred kilometers of continuous marine gravity data were collected in the lake and integrated with land gravity data to a distance of more than 20 km around the lake. Analyses of the gravity data resulted in a free-air anomaly map, a variable density Bouguer anomaly map, and a horizontal first derivative map of the Bouguer anomaly. These maps, together with gravity models of profiles across the lake and the area south of it, were used to infer the geometry of the basins in this region and the main faults of the transform system. The Sea of Galilee can be divided into two units. The southern half is a pull-apart that extends to the Kinarot Valley, south of the lake, whereas the northern half was formed by rotational opening and transverse normal faults. The deepest part of the basinal area is located well south of the deepest bathymetric depression. This implies that the northeastern part of the lake, where the bathymetry is the deepest, is a young feature that is actively subsiding now. The pull-apart basin is almost symmetrical in the southern part of the lake and in the Kinarot Valley south of the lake. This suggests that the basin here is bounded by strike-slip faults on both sides. The eastern boundary fault extends to the northern part of the lake, while the western fault does not cross the northern part. The main factor controlling the structural complexity of this area is the interaction of the Dead Sea transform with a subperpendicular fault system and rotated blocks.

Sea of Galilee↗
USGS1996

Three-dimensional P and S wave velocity structure of Redoubt Volcano, Alaska

The three‐dimensional P and S wave structure of Redoubt Volcano, Alaska, and the underlying crust to depths of 7–8 km is determined from 6219 P wave and 4008 S wave first‐arrival times recorded by a 30‐station seismograph network deployed on and around the volcano. First‐arrival times are calculated using a finite‐difference technique, which allows for flexible parameterization of the slowness model and easy inclusion of topography and source‐receiver geometry. The three‐dimensional P wave velocity structure and hypocenters are determined simultaneously, while the three‐dimensional S wave velocity model is determined using the relocated seismicity and an initial S wave velocity model derived from the P wave velocity model assuming an average Vp / Vs ratio of 1.78. Convergence is steady with approximately 73% and 52% reduction in P and S wave arrival time RMS, respectively, after 10 iterations. The most prominent feature observed in the three‐dimensional velocity models derived for both P and S waves is a relative low‐velocity, near‐vertical, pipelike structure approximately 1 km in diameter that extends from 1 to 6 km beneath sea level. This feature aligns axially with the bulk of seismicity and is interpreted as a highly fractured and altered zone encompassing a magma conduit. The velocity structure beneath the north flank of the volcano between depths of 1 and 6 km is characterized by large lateral velocity variations. High velocities within this region are interpreted as remnant dikes and sills and low velocities as regions along which magma migrates. No large low‐velocity body suggestive of a magma chamber is resolved in the upper 7–8 km of the crust.

Journal of Geophysical Research B: Solid Earth↗
USGS1996

Mauna Loa lava accumulation rates at the Hilo drill site: Formation of lava deltas during a period of declining overall volcanic growth

Accumulation rates for lava flows erupted from Mauna Loa, as sampled in the uppermost 280 m of the Hilo drill hole, vary widely for short time intervals (several thousand years), but overall are broadly similar to those documented elsewhere on this volcano since 100 ka. Thickness variations and accumulation rates for Mauna Loa lavas at the Hilo drill site have been strongly affected by local paleotopography, including funneling and ponding between Mauna Kea and Kilauea. In addition, gentle submerged slopes of Mauna Kea in Hilo Bay have permitted large shoreline displacements by Mauna Loa flows. Ages of eruptive intervals have been determined from published isotopic data and from eustatic sea level curves modified to include the isostatic subsidence of the island of Hawaii at 2.2-2.6 mm/yr. Prior to 10 ka, rates of Mauna Loa lava accumulation at the drill site varied from 0.6 to 4.3 mm/yr for dateable intervals, with an overall rate of 1.8 mm/yr. Major eruptive pulses at about 1.3 and 10 ka, each probably representing a single long-lived eruption based on lack of weathering between flow units, increase the overall accumulation rate to 2.4 mm/yr. The higher rate since 10 ka reflects construction of thick near-shoreline lava deltas as postglacial sea levels rose rapidly. Large lava deltas form only along coastal segments where initially subaerial slopes have been submerged by the combined effects of eustatic sea level rise, isostatic subsidence, or spreading of volcano flanks. Overall accumulation of 239 m of lava at the drill site since 100-120 ka closely balances submergence of the Hilo area, suggesting that processes of coastal lava deposition have been modulated by rise in sea level. The Hilo accumulation rate is slightly higher than average rates of 1-2 mm/yr determined elsewhere along the Mauna Loa coast, based on rates of shoreline coverage and dated sea cliff and fault scarp exposures. Low rates of coastal lava accumulation since 100 ka, near or below the rate of island-wide isostatic subsidence, indicate that Mauna Loa is no longer growing vigorously or even maintaining its size above sea level.

Journal of Geophysical Research B: Solid Earth↗
USGS1996

Coral ages and island subsidence, Hilo drill hole

A 25.8-m-thick sedimentary section containing coral fragments occurs directly below a surface lava flow (the ∼1340 year old Panaewa lava flow) at the Hilo drill hole. Ten coral samples from this section dated by accelerator mass spectrometry (AMS) radiocarbon and five by thermal infrared multispectral scanner (TIMS) 230 Th/U methods show good agreement. The calcareous unit is 9790 years old at the bottom and 1690 years old at the top and was deposited in a shallow lagoon behind an actively growing reef. This sedimentary unit is underlain by a 34-m-thick lava flow which in turn overlies a thin volcaniclastic silt with coral fragments that yield a single 14 C date of 10,340 years. The age-depth relations of the dated samples can be compared with proposed eustatic sea level curves after allowance for island subsidence is taken. Island subsidence averages 2.2 mm/yr for the last 47 years based on measurements from a tide gage near the drill hole or 2.5–2.6 mm/yr for the last 500,000 years based on the ages and depths of a series of drowned coral reefs offshore from west Hawaii. The age-depth measurements of coral fragments are more consistent with eustatic sea levels as determined by coral dating at Barbados and Albrolhos Islands than those based on oxygen isotopic data from deep sea cores. The Panaewa lava flow entered a lagoon underlain by coral debris and covered the drill site with 30.9 m of lava of which 11 m was above sea level. This surface has now subsided to 4.2 m above sea level, but it demonstrates how a modern lava flow entering Hilo Bay would not only change the coastline but could extensively modify the offshore shelf.

Journal of Geophysical Research B: Solid Earth↗
USGS1996

Stress/strain changes and triggered seismicity at The Geysers, California

The principal results of this study of remotely triggered seismicity in The Geysers geothermal field are the demonstration that triggering (initiation of earthquake failure) depends on a critical strain threshold and that the threshold level increases with decreasing frequency, or, equivalently, depends on strain rate. This threshold function derives from (1) analyses of dynamic strains associated with surface waves of the triggering earthquakes, (2) statistically measured aftershock zone dimensions, and (3) analytic functional representations of strains associated with power production and tides. The threshold is also consistent with triggering by static strain changes and implies that both static and dynamic strains may cause aftershocks. The observation that triggered seismicity probably occurs in addition to background activity also provides an important constraint on the triggering process. Assuming the physical processes underlying earthquake nucleation to be the same, Gomberg [this issue] discusses seismicity triggered by the M W 7.3 Landers earthquake, its constraints on the variability of triggering thresholds with site, and the implications of time delays between triggering and triggered earthquakes. Our results enable us to reject the hypothesis that dynamic strains simply nudge prestressed faults over a Coulomb failure threshold sooner than they would have otherwise. We interpret the rate-dependent triggering threshold as evidence of several competing processes with different time constants, the faster one(s) facilitating failure and the other(s) inhibiting it. Such competition is a common feature of theories of slip instability. All these results, not surprisingly, imply that to understand earthquake triggering one must consider not only simple failure criteria requiring exceedence of some constant threshold but also the requirements for generating instabilities.

Journal of Geophysical Research B: Solid Earth↗
USGS1996

Stress perturbation associated with the Amazonas and other ancient continental rifts

The state of stress in the vicinity of old continental rifts is examined to investigate the possibility that crustal structure associated with ancient rifts (specifically a dense rift pillow in the lower crust) may modify substantially the regional stress field. Both shallow (2.0–2.6 km depth) breakout data and deep (20–45 km depth) crustal earthquake focal mechanisms indicate a N to NNE maximum horizontal compression in the vicinity of the Paleozoic Amazonas rift in central Brazil. This compressive stress direction is nearly perpendicular to the rift structure and represents a ∼75° rotation relative to a regional E‐W compressive stress direction in the South American plate. Elastic two‐dimensional finite element models of the density structure associated with the Amazonas rift (as inferred from independent gravity modeling) indicate that elastic support of this dense feature would generate horizontal rift‐normal compressional stresses between 60 and 120 MPa, with values of 80–100 MPa probably most representative of the overall structure. The observed ∼75° stress rotation constrains the ratio of the regional horizontal stress difference to the rift‐normal compressive stress to be between 0.25 and 1.0, suggesting that this rift‐normal stress may be from 1 to 4 times larger than the regional horizontal stress difference. A general expression for the modification of the normalized local horizontal shear stress (relative to the regional horizontal shear stress) shows that the same ratio of the rift‐normal compression relative to the regional horizontal stress difference, which controls the amount of stress rotation, also determines whether the superposed stress increases or decreases the local maximum horizontal shear stress. The potential for fault reactivation of ancient continental rifts in general is analyzed considering both the local stress rotation and modification of horizontal shear stress for both thrust and strike‐slip stress regimes. In the Amazonas rift case, because the observed stress rotation only weakly constrains the ratio of the regional horizontal stress difference to the rift‐normal compression to be between 0.25 and 1.0, our analysis is inconclusive because the resultant normalized horizontal shear stress may be reduced (for ratios >0.5) or enhanced (for ratios <0.5). Additional information is needed on all three stress magnitudes to predict how a change in horizontal shear stress directly influences the likelihood of faulting in the thrust‐faulting stress regime in the vicinity of the Amazonas rift. A rift‐normal stress associated with the seismically active New Madrid ancient rift may be sufficient to rotate the horizontal stress field consistent with strike‐slip faults parallel to the axis of the rift, although this results in a 20–40% reduction in the local horizontal shear stress within the seismic zone. Sparse stress data in the vicinity of the seismically quiescent Midcontinent rift of the central United States suggest a stress state similar to that of New Madrid, with the local horizontal shear stress potentially reduced by as much as 60%. Thus the markedly different levels of seismic activity associated with these two subparallel ancient rifts is probably due to other factors than stress perturbations due to dense rift pillows. The modeling and analysis here demonstrate that rift‐normal compressive stresses are a significant source of stress acting on the lithosphere and that in some cases may be a contributing factor to the association of intraplate seismicity with old zones of continental extension.

Journal of Geophysical Research B: Solid Earth↗
USGS1996

Thermal and mass implications of magmatic evolution in the Lassen volcanic region, California, and minimum constraints on basalt influx to the lower crust

We have analyzed the heat and mass demands of a petrologic model of basalt-driven magmatic evolution in which variously fractionated mafic magmas mix with silicic partial melts of the lower crust. We have formulated steady state heat budgets for two volcanically distinct areas in the Lassen region: the large, late Quaternary, intermediate to silicic Lassen volcanic center and the nearby, coeval, less evolved Caribou volcanic field. At Caribou volcanic field, heat provided by cooling and fractional crystallization of 52 km 3 of basalt is more than sufficient to produce 10 km of rhyolitic melt by partial melting of lower crust. Net heat added by basalt intrusion at Caribou volcanic field is equivalent to an increase in lower crustal heat flow of ∼7 mW m −2 , indicating that the field is not a major crustal thermal anomaly. Addition of cumulates from fractionation is offset by removal of erupted partial melts. A minimum basalt influx of 0.3 km 3 (km 2 Ma) −1 is needed to supply Caribou volcanic field. Our methodology does not fully account for an influx of basalt that remains in the crust as derivative intrusives. On the basis of comparison to deep heat flow, the input of basalt could be ∼3 to 7 times the amount we calculate. At Lassen volcanic center, at least 203 km 3 of mantle-derived basalt is needed to produce 141 km 3 of partial melt and drive the volcanic system. Partial melting mobilizes lower crustal material, augmenting the magmatic volume available for eruption at Lassen volcanic center; thus the erupted volume of 215 km 3 exceeds the calculated basalt input of 203 km 3 . The minimum basalt input of 1.6 km 3 (km 2 Ma) −1 is >5 times the minimum influx to the Caribou volcanic field. Basalt influx high enough to sustain considerable partial melting, coupled with locally high extension rate, is a crucial factor in development of Lassen volcanic center; in contrast, Caribou volcanic field has failed to develop into a large silicic center primarily because basalt supply there has been insufficient.

Journal of Geophysical Research B: Solid Earth↗
USGS1996

Rheology of water ices V and VI

We have measured the mechanical strength (σ) of pure water ices V and VI under steady state deformation conditions. Constant displacement rate compressional tests were conducted in a gas apparatus at confining pressures from 400 < P < 800 MPa, temperatures from 209 < T < 270 K, and strain rates 7 × 10 −7 < < 7 × 10 −4 s −1 . Most of the results fit to an empirical flow law of the form = A σ n exp {−( E * + PV *)/ RT }, where the four material constants A , n , E *, and V * are (for in inverse seconds and P and σ in megapascals) 10 23.0 , 6.0, 136 kJ/mol, and 29 cm 3 /mol, respectively, for ice V; and 10 6.7 , 4.5, 66 kJ/mol, and 11 cm 3 /mol, respectively, for ice VI. Ice VI may weaken to a mechanism of higher E * at T > 250 K. Ices V and VI are thus rheologically distinct but by coincidence have approximately the same strength under the conditions chosen for these experiments. To avoid misidentification, these tests are therefore accompanied by careful observations of the occurrences and characteristics of phase changes. One sample each of ice V and VI was quenched at pressure to metastably retain the high-pressure phase and the acquired deformation microstructures; X ray diffraction analysis of these samples confirmed the phase identification. Surface replicas of the deformed and quenched samples suggest that ice V probably deforms largely by dislocation creep, while ice VI deforms by a more complicated process involving substantial grain size reduction through recrystallization.

Journal of Geophysical Research B: Solid Earth↗
USGS1996

The 40Ar/39Ar and K/Ar dating of lavas from the Hilo 1-km core hole, Hawaii Scientific Drilling Project

Mauna Kea lava flows cored in the Hilo hole range in age from <200 ka to about 400 ka based on 40 Ar/ 39 Ar incremental heating and K‐Ar analyses of 16 groundmass samples and one coexisting plagioclase. The lavas, all subaerially deposited, include a lower section consisting only of tholeiitic basalts and an upper section of interbedded alkalic, transitional tholeiitic, and tholeiitic basalts. The lower section has yielded predominantly complex, discordant 40 Ar/ 39 Ar age spectra that result from mobility of 40 Ar and perhaps K, the presence of excess 40 Ar, and redistribution of 39 Ar by recoil. Comparison of K‐Ar ages with 40 Ar/ 39 Ar integrated ages indicates that some of these samples have also lost 39 Ar. Nevertheless, two plateau ages of 391 ± 40 and 400 ± 26 ka from deep in the hole, combined with data from the upper section, show that the tholeiitic section accumulated at an average rate of about 7 to 8 m/kyr and has a mean recurrence interval of 0.5 kyr/flow unit. Samples from the upper section yield relatively precise 40 Ar/ 39 Ar plateau and isotope correlation ages of 326 ± 23, 241 ± 5, 232 ± 4, and 199 ± 9 ka for depths of −415.7 m to −299.2 m. Within their uncertainty, these ages define a linear relationship with depth, with an average accumulation rate of 0.9 m/kyr and an average recurrence interval of 4.8 kyr/flow unit. The top of the Mauna Kea sequence at −280 m must be older than the plateau age of 132 ± 32 ka, obtained for the basal Mauna Loa flow in the corehole. The upward decrease in lava accumulation rate is a consequence of the decreasing magma supply available to Mauna Kea as it rode the Pacific plate away from its magma source, the Hawaiian mantle plume. The age‐depth relation in the core hole may be used to test and refine models that relate the growth of Mauna Kea to the thermal and compositional structure of the mantle plume.

Journal of Geophysical Research B: Solid Earth↗
USGS1996

Crustal structure of the Colorado Plateau, Arizona: Application of new long-offset seismic data analysis techniques

The Colorado Plateau is a large crustal block in the southwestern United States that has been raised intact nearly 2 km above sea level since Cretaceous marine sediments were deposited on its surface. Controversy exists concerning the thickness of the plateau crust and the source of its buoyancy. Interpretations of seismic data collected on the plateau vary as to whether the crust is closer to 40 or 50 km thick. A thick crust could support the observed topography of the Colorado Plateau isostatically, while a thinner crust would indicate the presence of an underlying low-density mantle. This paper reports results on long-offset seismic data collected during the 1989 segment of the U.S. Geological Survey Pacific to Arizona Crustal Experiment that extended from the Transition Zone into the Colorado Plateau in northwest Arizona. We apply two new methods to analyze long-offset data that employ finite difference travel time calculations: (1) a first-arrival time inverter to find upper crustal velocity structure and (2) a forward-modeling technique that allows the direct use of the inverted upper crustal solution in modeling secondary reflected arrivals. We find that the crustal thickness increases from 30 km beneath the metamorphic core complexes in the southern Basin and Range province to about 42 km beneath the northern Transition Zone and southern Colorado Plateau margin. We observe some crustal thinning (to ∼37 km thick) and slightly higher lower crustal velocities farther inboard; beneath the Kaibab uplift on the north rim of the Grand Canyon the crust thickens to a maximum of 48 km. We observe a nonuniform crustal thickness beneath the Colorado Plateau that varies by ∼15% and corresponds approximately to variations in topography with the thickest crust underlying the highest elevations. Crustal compositions (as inferred from seismic velocities) appear to be the same beneath the Colorado Plateau as those in the Basin and Range province to the southwest, implying that the plateau crust represents an unextended version of the Basin and Range. Some of the variability in crustal structure appears to correspond to preserved lithospheric discontinuities that date back to the Proterozoic Era.

Journal of Geophysical Research B: Solid Earth↗
USGS1996

Hydrogeology of the Hawaii Scientific Drilling Project borehole KP-1 2. Groundwater geochemistry and regional flow patterns

A series of downhole and surface water samples were taken from the 1‐km‐deep KP‐1 borehole located on the eastern flank of the island of Hawaii. Early samples from depths of more than 700 m showed salinities nearly equivalent to seawater but having anomalous cation concentrations that are attributed to ion exchange between formation fluids and residual drilling mud clays. Later deep samples found only minor variations from seawater cation chemistry that are consistent with low‐temperature weathering of basalts; δ 18 O values are equivalent to seawater values and are consistent with this interpretation. Carbon 14 activities of dissolved inorganic carbonate indicate a water age ranging from 5890 to 7170 years B.P. and fluid transport rates of 1.8 to 2.2 m/yr. Fluid samples from perforations at 310 m in the borehole demonstrate that a freshwater aquifer is present at the Mauna Kea/Mauna Loa interface; borehole resistivity logs indicate that it is ∼200 m thick. Although it has not yet been possible to obtain samples of the freshwater zone without contamination from the deep saline fluids, the chloride concentrations of the low‐salinity zone are estimated using a mixing enthalpy calculation to be less than 100 mg/L. Light stable isotope data indicate that the fresh water at 320 m is derived from recharge entering the island at an average elevation of 2000 m. Inferred 14 C activities of the dissolved bicarbonate in the freshwater zone indicate an average calibrated age of 2200 years B.P. and an average fluid velocity of at least 14 m/yr. A regional water flow model is proposed that suggests that the fresh water found at the 320‐m depth is derived from rainfall recharge from the middle elevations of Mauna Kea volcano. This rainfall is channeled beneath the Mauna Loa lavas by the thick soil layer separating the two volcanoes. A second shallow fresh‐to‐brackish water zone, derived from Mauna Loa recharge, is also inferred to exist below the carbonate formation that underlies the shallow basal lens. The results of our preliminary study of the groundwater system below the KP‐1 drill site demonstrate that intervolcano and interflow aquicludes can have a substantial impact on water circulation and discharge from young island volcanoes.

Journal of Geophysical Research B: Solid Earth↗
USGS1996

Analysis of fractures intersecting Kahi Puka Well 1 and its relation to the growth of the island of Hawaii

As part of the Hawaii Scientific Drilling Project, Kahi Puka Well 1 penetrated about 275 m of Mauna Loa basalts overlying a sequence of Mauna Kea flow units as it was drilled and cored to a total depth of 1053 m below land surface. A borehole televiewer (BHTV) was run in most of the well in successive stages prior to casing in order to obtain magnetically oriented acoustic images of the borehole wall. A total of 283 individual fractures were identified from this log and characterized in terms of strike and dip. These data are divided into three vertical sections based upon age and volcanic source, and lower hemisphere stereographic plots identify two predominant, subparallel fracture subsets common to each section. Assuming that most of the steeply dipping fractures observed in the BHTV log are tensile features generated within basalt flows during deposition and cooling, this fracture information can be combined with models of the evolution of the island of Hawaii to investigate the depositional history of these Mauna Loa and Mauna Kea basalts over the past 400 kyr. The directions of high-angle fractures appear to be generally parallel to topography or to the coastline at the time of deposition, as is supported by surface mapping of modern flows. Consequently, an overall counterclockwise rotation of about 75?? in the strike of these fractures from the bottom to the top of the well represents a systematic change in depositional slope direction over time. We attribute the observed rotation in the orientations of the two predominant fracture subsets over the past 400 kyr to changes in the configurations of volcanic sources during shield building and to the structural interference of adjacent volcanoes that produces shifts in topographic patterns.

Journal of Geophysical Research B: Solid Earth↗
USGS1996

Potential climatic impacts of vegetation change: A regional modeling study

The human species has been modifying the landscape long before the development of modern agrarian techniques. Much of the land area of the conterminous United States is currently used for agricultural production. In certain regions this change in vegetative cover from its natural state may have led to local climatic change. A regional climate version of the Colorado State University Regional Atmospheric Modeling System was used to assess the impact of a natural versus current vegetation distribution on the weather and climate of July 1989. The results indicate that coherent regions of substantial changes, of both positive and negative sign, in screen height temperature, humidity, wind speed, and precipitation are a possible consequence of land use change throughout the United States. The simulated changes in the screen height quantities were closely related to changes in the vegetation parameters of albedo, roughness length, leaf area index, and fractional coverage.

Journal of Geophysical Research D: Atmospheres↗
USGS1996

Modeling of fluidized ejecta emplacement over digital topography on Venus

The FLOW computer model of McEwen and Malin (1989) modified for application to the study of Venus fluidized ejecta blankets (FEBs) demonstrates that relatively low viscosities, yield strengths, and initial velocities are required to duplicate the observed flow paths of the outflow materials. The model calculates the velocities and simulated flow paths of gravity flows over Magellan topography. The model is formulated to determine flow movements from initial conditions, gravitational acceleration, and resistance to motion as described by Coulomb, viscous, and turbulent resistance forces. Successful duplication of observed FEB flow paths has been achieved for the FEB craters Addams, Isabella, and Cochran. When used as a simple energy‐line model, the model requires low coefficients of friction to extend FEBs to near their observed termini in the synthetic aperture radar (SAR) imagery, although the resulting straight flow lines do not follow the observed flow paths well. For Bingham flow, the model requires low values of viscosity and yield strength which are more similar to pyroclastic or debris flows than basaltic lavas. Flows of 100‐m depth require 1 to 2 orders of magnitude higher values of both viscosity and yield strength than 10‐m‐deep flows. The complicated nature of the flow lines for the low velocity model suggests that FEBs were probably emplaced under variably laminar and turbulent flow conditions, where underlying topography influenced both the direction and energy of flow materials.

Journal of Geophysical Research E: Planets↗
USGS2012

Compositional variations on the Moon: Recalibration of Galileo solid‐state imaging data for the Orientale region and farside

Updated radiometric calibration and systematic processing procedures for Galileo solid‐state imaging (SSI) data from the first (1990) Earth‐Moon encounter are presented. These procedures were applied to a whole‐disk imaging sequence of the Moon centered near Mare Orientale, called Lunmap 14 (L14). Processing of L14 data included radiometric calibration, subpixel coregistration, scattered light removal, geometric control and reprojection, photometric normalization, and calibration to Earth‐based spectra. Coregistration and scattered‐light removal procedures are improvements over the initial calibration of the SSI mosaics. The effects of scattered light correction are best seen using a whole‐Moon view such as L14; resolution of the debated amounts of light scattering from within or outside the camera field of view is not necessary. Scattered light removal particularly affects the 1‐μm spectral region and has implications for interpretation of mafic mineral signatures in mare deposits of the lunar limb and farside. Recalibrated spectra indicate that mare ponds of the limb show moderately deep 1‐μm absorptions, and thus mafic mineral contents, comparable to those of other nearside basalts. Mafic mineral contents of Schiller‐Shickard cryptomaria are higher than previously thought and are similar to some low‐Ti nearside basalts. Many of the recalibrated spectra from South Pole/Aitken are similar to those of Schiller‐Schickard cryptomaria, suggesting that many of these soils represent a mixed mare/highland lithology. The hypothesis that there is an olivine enrichment in southern South Pole/Aitken basin is not supported strongly by spectra shown here.

Journal of Geophysical Research: Planets↗