SEARCH · Search USGS

Results for “Data Science in Science”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,171 records · Page 65Linked to original sources

USGS1977

Worldwide standardized seismograph network

A global network of seismographs is as indispensable to seismologists as telescopes are to astronomers. The network is used to catalog the thousands of earthquakes that occur each year and to provide the data needed for detailed studies of earthquake mechanisms, deep Earth structure, and tectonic processes. Like astronomy, seismology is an observational science, and most of the scientific advances have been preceded by improvements in instrument technology. To be useful for seismic studies, new technology must be applied on a global scale. During the past two decades, there has been notable success in meeting this objective. The network that exists today (fig. 1) is a vital scientific resource. Continued innovations and improvements are needed to insure that its keeps pace with the data needs of the seismological community.

Earthquake Information Bulletin (USGS)↗

USGS2021

System characterization report on Resourcesat-2 Advanced Wide Field Sensor

Executive Summary This report addresses system characterization of the Indian Space Research Organisation Resourcesat-2 Advanced Wide Field Sensor (AWiFS) and is part of a series of system characterization reports produced and delivered by the U.S. Geological Survey Earth Resources Observation and Science Cal/Val Center of Excellence in 2021. These reports present and detail the methodology and procedures for characterization; present technical and operational information about the specific sensing system being evaluated; and provide a summary of test measurements, data retention practices, data analysis results, and conclusions. Resourcesat-2 is a medium-resolution satellite launched in 2011 on the Polar Satellite Launch Vehicle-C16. Resourcesat-2 carries the same sensing elements as Resourcesat-1 (launched in October 2003) and provides continuity for the mission. The objectives of the Resourcesat mission are to provide remote sensing data services to global users, focusing on data for integrated land and water resources management. Resourcesat-2A is identical to Resourcesat-2 and was launched in 2016 on the Polar Satellite Launch Vehicle-C36 launch vehicle for continuity of data and improved temporal resolution. The two satellites operating in tandem improved the revisit capability from 5 days to 2–3 days. The Resourcesat-2 platform is of Indian Remote Sensing Satellites-1C/1D–P3 heritage and was built by the Indian Space Research Organisation. Resourcesat-2 and Resourcesat-2A carry the AWiFS, Linear Imaging Self Scanning-3, and Linear Imaging Self Scanning-4 sensors for medium-resolution imaging. More information on Indian Space Research Organisation satellites and sensors is available in the “2020 Joint Agency Commercial Imagery Evaluation—Remote Sensing Satellite Compendium” and from the manufacturer at https://www.isro.gov.in/ . The Earth Resources Observation and Science Cal/Val Center of Excellence system characterization team completed data analyses to characterize the geometric (interior and exterior), radiometric, and spatial performances. Results of these analyses indicate that AWiFS has an interior geometric performance in the range of −16.080 (−0.268 pixel) to 35.520 meters (m; 0.592 pixel) in easting and −25.680 (−0.428 pixel) to 23.400 m (0.390 pixel) in northing in band-to-band registration, an exterior geometric error of −64.262 (−1.071 pixels) to −19.059 m (−0.318 pixel) in easting and −29.028 (−0.484 pixel) to 41.249 m (0.687 pixel) in northing offset in comparison to the Landsat 8 Operational Land Imager, a radiometric performance in the range of 2.29–2.36 pixels for full width at half maximum, with a modulation transfer function at a Nyquist frequency in the range of 0.030–0.035.

Open-File Report↗

USGS2023

System characterization report on the BlackSky Global multispectral sensor

Executive Summary This report addresses system characterization of the BlackSky Global satellites and is part of a series of system characterization reports produced and delivered by the U.S. Geological Survey Earth Resources Observation and Science Cal/Val Center of Excellence. These reports present and detail the methodology and procedures for characterization; present technical and operational information about the specific sensing system being evaluated; and provide a summary of test measurements, data retention practices, data analysis results, and conclusions. The BlackSky Global satellites are three-band multispectral imagers (red, green, and blue multispectral bands plus a panchromatic band) with a 0.8- to 0.9-meter (m) pixel ground sample distance for the assessed satellites. BlackSky Global satellites 9 and 12–17 were launched in March and December 2021, respectively, into a Sun-synchronous orbit of 430–450 kilometers with an inclination of 42–53 degrees and a swath width of 6 kilometers at nadir. Each Global satellite has an expected lifetime of about 3 years. More information on the BlackSky Global satellites is available in the “Land Remote Sensing Satellites Online Compendium” ( https://calval.cr.usgs.gov/apps/compendium ) and from BlackSky at Real-Time Space-Based Intelligence (blacksky.com) The Earth Resources Observation and Science Cal/Val Center of Excellence system characterization team completed data analyses to characterize the geometric (interior and exterior) and spatial performances. Results of these analyses indicate that the assessed BlackSky Global satellites have an interior geometric performance in the range of −0.011 m (−0.012 pixel) to 0.007 m (0.008 pixel) in easting and −0.018 m (−0.020 pixel) to 0.012 m (0.013 pixel) in northing in band-to-band registration; an exterior geometric performance using ground control points of 8.0-m circular error (95-percent certainty) for orthorectified products and 10.7- to 17.4-m circular error (95-percent certainty) for nonorthorectified products, depending on the geolocation metadata used; and a spatial performance in the range of 1.70 to 2.43 pixels for full width at half maximum, with a modulation transfer function at a Nyquist frequency in the range of 0.032 to 0.084.

Open-File Report↗

USGS2025

Trade-offs in designing a participatory acoustic study of bats: Comparison of user engagement and data quality between two ultrasonic detectors

Technology for the acoustic detection of animals has advanced rapidly over the past few decades. Due to ease of use, consistency, and safety, acoustic methods are particularly useful for science applications that engage the public. In this study, we evaluated the technological and educational trade-offs between 2 acoustic bat detectors in a participatory science application along the Colorado River in the Grand Canyon, Arizona. Both devices were deployed simultaneously by commercial river guides in parallel with sampling insect prey for 1 h at dusk on 48 dates between April and October 2022. The detector with higher data quality capabilities recorded more bats overall (a mean of 231 more passes per hour) and more species (19 species, including 4 not detected by the lower quality detector). However, data from both detectors showed a decrease in total bat activity from spring to fall, despite the differences in recording capabilities. We conclude that detector quality matters, but user engagement is important when designing participatory research.

Journal of North American Bat Research↗

USGS2012

Reformatted data sets used in the Cooperative LACSD/USGS Palos Verdes Flow Study, 2000--2008

Beginning in 1997, the Environmental Protection Agency (EPA) defined a contaminated section of the Palos Verdes shelf in southern California as a Superfund site, initiating a continuing investigation of this area. A number of agencies, including the EPA, U.S. Geological Survey (USGS), and Science Applications International Corporation (SAIC), conducted two oceanographic measurement programs in 2004 and 2007-2008 (SAIC, 2004, 2005; Rosenberger and others, 2010; Sherwood and others, unpublished data) to improve our understanding of the natural processes that resuspend and transport sediment in the area, especially in the region southeast of the Whites Point ocean outfall where earlier measurements were thought to be deficient. Los Angeles County Sanitation Districts (LACSD) deployed a simpler but much broader array of instruments on the Palos Verdes shelf and within the northern reaches of San Pedro Bay from 2000 to 2008 in order to characterize the current and temperature patterns within these regions. This program overlapped the two programs run by USGS and other agencies in 2004 and 2007. The LACSD data were made available to the USGS and the EPA in order to support their joint efforts to model the transport of the contaminated sediments in the region. This report describes the LACSD data sets, the instruments and data-processing procedures used, and the archive that contains the data sets that have passed our quality-assurance procedures.

California↗

USGS2025

Potential for continental scientific drilling to inform fault mechanics and earthquake science

Our understanding of fault mechanics and earthquake processes remains limited, largely due to minimal direct observations near active faults at seismogenic depths. This lack of data restricts our ability to accurately assess and mitigate both natural and human-induced seismic hazards. However, recent advancements in drilling capabilities and downhole sensing technologies offer an opportunity: the ability to observe the physical conditions within a volume near active fault zones. In this contribution, we highlight how scientific drilling can provide access to the near-fault environment, enabling measurements of the stress, temperature, fluid pressure, and rock properties at depths where ruptures initiate, propagate, and arrest. These observations are essential to refine models of earthquake nucleation and dynamic rupture, bridging gaps between laboratory experiments, numerical simulations, and surface observations. These insights can advance fundamental understanding in earthquake science but also support the development of more effective seismic hazard assessments and risk mitigation strategies.

Seismica↗

USGS2021

System characterization report on Resourcesat-2 Linear Imaging Self Scanning-3 (LISS–3) sensor

Executive Summary This report addresses system characterization of the Indian Space Research Organisation Resourcesat-2 Linear Imaging Self Scanning-3 (LISS–3) sensor and is part of a series of system characterization reports produced and delivered by the U.S. Geological Survey Earth Resources Observation and Science Cal/Val Center of Excellence in 2021. These reports present and detail the methodology and procedures for characterization; present technical and operational information about the specific sensing system being evaluated; and provide a summary of test measurements, data retention practices, data analysis results, and conclusions. Resourcesat-2 is a medium-resolution satellite launched in 2011 on the Polar Satellite Launch Vehicle-C16 launch vehicle. Resourcesat-2 carries the same sensing elements as Resourcesat-1 (launched in October 2003) and provides continuity for the mission. The objectives of the Resourcesat mission are to provide remote sensing data services to global users, focusing on data for integrated land and water resources management. Resourcesat-2A is identical to Resourcesat-2 and was launched in 2016 on the Polar Satellite Launch Vehicle-C36 launch vehicle for continuity of data and improved temporal resolution. The two satellites operating in tandem improved the revisit capability from 5 days to 2–3 days. The Resourcesat-2 platform is of Indian Remote Sensing Satellites-1C/1D–P3 heritage and was built by the Indian Space Research Organisation. Resourcesat-2 and Resourcesat-2A carry the Advanced Wide Field Sensor and LISS–3, as well as the Linear Imaging Self Scanning-4 for medium-resolution imaging. More information on Indian Space Research Organisation satellites and sensors is available in the “2020 Joint Agency Commercial Imagery Evaluation—Remote Sensing Satellite Compendium” and from the manufacturer at https://www.isro.gov.in/ . The Earth Resources Observation and Science Cal/Val Center of Excellence system characterization team completed data analyses to characterize the geometric (interior and exterior), radiometric, and spatial performances. Results of these analyses indicate that LISS–3 has an interior geometric performance in the range of −4.620 (−0.154 pixel) to 13.230 meters (m; 0.441 pixel) in easting and −12.360 (−0.412 pixel) to 1.500 m (0.050 pixel) in northing in band-to-band registration, an exterior geometric error of −27.805 (−0.927 pixel) to 26.578 m (0.886 pixel) in easting and −35.341 (−1.178 pixel) to −6.286 m (−0.210 pixel) in northing offset in comparison to the Landsat 8 Operational Land Imager, a radiometric performance in the range of −0.096 to 0.036 in offset and 0.585–0.946 in slope, and a spatial performance in the range of 1.87–1.95 pixels for full width at half maximum, with a modulation transfer function at a Nyquist frequency in the range of 0.045–0.070.

Open-File Report↗

USGS2026

Prioritizing resource protection and understanding potential susceptibility of springs to surficial changes in a low-temperature geothermal system

Geothermal systems are vulnerable to changes in water budget and composition, requiring science-based management. This study uses a dataset of spring water temperatures, time series of groundwater residence time tracers (tritium and carbon-14), and stable isotopes of water to understand geothermal flow in a low-temperature geothermal system in north west Colorado, United States (Steamboat Springs). The geothermal system is bisected by the Yampa River, necessitating a stream mass balance approach to quantify total discharge. Time series analysis of water temperature data provides a ranked list of features more susceptible to surficial changes, which is corroborated using time series of tritium which indicate spatially distinct patterns of mixing between modern and pre-modern groundwater. All springs contain a portion of pre-modern groundwater that is thousands to tens of thousands of years old, a period coinciding with melting of extensive Pleistocene glaciers that was likely one of the recharge sources to the geothermal system. Stream mass balance indicates that greater than 80% of the total geothermal discharge is derived from diffuse or small springs, highlighting the extensive nature of the geothermal outflow zone and the association with local geologic structures. This study provides baseline data to support management of the Steamboat Springs geothermal system and indicates the utility of these approaches in developing science-based geothermal management.

Colorado↗

USGS2021

System characterization report on Planet’s Dove Classic

Executive Summary This report addresses system characterization of Planet’s Dove Classic satellites and is part of a series of system characterization reports produced and delivered by the U.S. Geological Survey Earth Resources Observation and Science Cal/Val Center of Excellence. These reports present and detail the methodology and procedures for characterization; present technical and operational information about the specific sensing system being evaluated; and provide a summary of test measurements, data retention practices, data analysis results, and conclusions. Since 2013, Planet has launched more than 360 Dove 3U CubeSats, where U stands for 10-centimeter (cm) x 10-cm x 10-cm stowed dimensions, each weighing about 5 kilograms. Since 2015, all Dove satellites have had four-band imagers with about a 4-meter (m) pixel ground sample distance. Since 2016, all Doves have been launched into Sun-synchronous orbits varying from 474 to 524 kilometers, with inclinations between 97 and 98 degrees. The Dove series satellites do not have orbit maintenance capabilities; thus, their orbits decay slowly over time, contributing to shorter lifetimes of about 3 years. More information on Planet satellites and sensors is available in the “2020 Joint Agency Commercial Imagery Evaluation—Remote Sensing Satellite Compendium” and from the manufacturer at https://www.planet.com/ . The Earth Resources Observation and Science Cal/Val Center of Excellence system characterization team completed data analyses to characterize the geometric (interior and exterior), radiometric, and spatial performances. Results of these analyses indicate that Dove Classic has an interior geometric performance in the range of −0.218 (−0.073 pixel) to −0.037 m (−0.012 pixel) in easting and −0.167 (−0.056 pixel) to −0.111 m (−0.037 pixel) in northing in band-to-band registration, an exterior geometric error of −6.841 (−2.280 pixels) in easting and −6.235 m (−2.078 pixels) in northing offset in comparison to Landsat 8 Operational Land Imager, a radiometric performance in the range of −0.057 to −0.010 in offset and 0.963 to 1.298 in slope, and a spatial performance in the range of 2.77 to 3.35 pixels for full width at half maximum, with a modulation transfer function at a Nyquist frequency in the range of 0.003 to 0.010.

Open-File Report↗

USGS2021

System characterization report on Planet’s Dove-R

Executive Summary This report addresses system characterization of Planet’s Dove-R and is part of a series of system characterization reports produced and delivered by the U.S. Geological Survey Earth Resources Observation and Science Cal/Val Center of Excellence. These reports present and detail the methodology and procedures for characterization; present technical and operational information about the specific sensing system being evaluated; and provide a summary of test measurements, data retention practices, data analysis results, and conclusions. Since 2013, Planet has launched more than 360 Dove 3U CubeSats, where U stands for 10-centimeter (cm) x 10-cm x 10-cm stowed dimensions, each weighing about 5 kilograms. Since 2015, all Dove satellites have had four-band imagers with about a 4-meter (m) pixel ground sample distance. Since 2016, all Doves have been launched into Sun-synchronous orbits varying from 474 to 524 kilometers, with inclinations between 97 and 98 degrees. The Dove series satellites do not have orbit maintenance capabilities; thus, their orbits decay slowly over time, contributing to shorter lifetimes of about 3 years. More information on Planet satellites and sensors is available in the “2020 Joint Agency Commercial Imagery Evaluation—Remote Sensing Satellite Compendium” and from the manufacturer at https://www.planet.com/ . The Earth Resources Observation and Science Cal/Val Center of Excellence system characterization team completed data analyses to characterize the geometric (interior and exterior), radiometric, and spatial performances. Results of these analyses indicate that Dove-R has an interior geometric performance in the range of −0.306 (−0.102 pixel) to 0.286 m (0.095 pixel) in easting and 0.090 (0.030 pixel) to 1.084 m (0.361 pixel) in northing in band-to-band registration, an exterior geometric performance of −5.10 m (−0.51 pixel) in easting and 3.30 m (0.33 pixel) in northing offset in comparison to Sentinel-2, a radiometric performance in the range of −0.023 to −0.008 in offset and 0.948 to 1.077 in slope, and a spatial performance in the range of 2.96 to 3.15 pixels for full width at half maximum, with a modulation transfer function at a Nyquist frequency in the range of 0.001 to 0.003.

Open-File Report↗

USGS2022

System characterization report on Planet’s SuperDove

Executive Summary This report addresses system characterization of Planet’s SuperDove and is part of a series of system characterization reports produced and delivered by the U.S. Geological Survey Earth Resources Observation and Science Cal/Val Center of Excellence. These reports present and detail the methodology and procedures for characterization; present technical and operational information about the specific sensing system being evaluated; and provide a summary of test measurements, data retention practices, data analysis results, and conclusions. Since 2013, Planet has launched more than 360 Dove 3U CubeSats, where U stands for 10-centimeter (cm) x 10-cm x 10-cm stowed dimensions, each weighing about 5.8 kilograms. Since 2015, all Dove satellites have had four-band imagers with about a 3-meter (m) pixel ground sample distance. Since 2016, all Doves have been launched into Sun-synchronous orbits varying from 474 to 524 kilometers, with inclinations between 97 and 98 degrees. The Dove series satellites do not have orbit maintenance capabilities; thus, their orbits decay slowly over time, contributing to shorter lifetimes of about 3 years. More information on Planet satellites and sensors is available in the “2020 Joint Agency Commercial Imagery Evaluation—Remote Sensing Satellite Compendium” and from the manufacturer at https://www.planet.com/ . The Earth Resources Observation and Science Cal/Val Center of Excellence system characterization team completed data analyses to characterize the geometric (interior and exterior), radiometric, and spatial performances. Results of these analyses indicate that SuperDove has a band-to-band geometric performance in the range of −1.701 m (−0.567 pixel) to 1.173 m (0.391 pixel) in easting and −4.950 m (−1.650 pixels) to 6.051 m (2.017 pixels) in northing, an image-to-image geometric performance of −1.17 m (−0.39 pixel) to 23.45 m (7.82 pixels) in easting and −10.61 m (−3.54 pixels) to −4.43 m (−1.48 pixels) in northing offset in comparison to Sentinel-2, a radiometric performance in the range of −0.043 to 0.020 in offset and 0.812 to 1.246 in slope, and a spatial performance in the range of 3.59 to 3.70 pixels for full width at half maximum, with a modulation transfer function at a Nyquist frequency in the range of 0.005 to 0.008.

Open-File Report↗

USGS2024

Polar science results from Mars Reconnaissance Orbiter: Multiwavelength, multiyear insights

Mars Reconnaissance Orbiter (MRO), with its arrival in 2006 and nearly continuous operation since, has provided data for the study of martian polar processes spanning nine Mars years. Mars' polar deposits have long been thought to preserve records of past climates, potentially readable like terrestrial ice cores. However, unraveling millions of years of history in the ice depends on understanding Mars' current and recent-past climate, including the interactions of atmospheric and surface processes . MRO has allowed for revolutionary discoveries, long-term monitoring of ongoing processes, and multiple complementary datasets to address the question of how the polar ice deposits reflect climatological changes. In part, MRO has been able to do this from its variety of instrumentation simultaneously observing interannual changes in geomorphology of the surface in up to ∼25 cm/pixel detail, repeatable processes and changes in the atmosphere, and surface composition, as well as investigating signs of past changes recorded in the icy polar layered deposits. In this paper, we summarize the contribution of MRO to our current understanding of Mars polar science, and in particular how MRO's long-duration mission has improved our understanding of the fundamental volatile cycles on Mars.

Icarus↗

USGS2006

EMMMA: A web-based system for environmental mercury mapping, modeling, and analysis

Mercury in our environment - in our air, water, soil, and especially our food - poses significant hazards to human health, particularly for developing fetuses and young children. Because of the importance of this issue and the length of time it has been studied, large and complex data sets of mercury concentrations in various media and associated ancillary data have been generated by many Federal, State, Tribal, and local agencies. To facilitate efficient and effective use of these data in managing and mitigating human and wildlife exposure to mercury, the U.S. Geological Survey (USGS) and the National Institute of Environmental Health Sciences have developed a website for visualizing and studying the distribution of mercury in our environment. The Environmental Mercury Mapping, Modeling, and Analysis (EMMMA) website (http://emmma.usgs.gov) provides health and environmental researchers, managers, and other decision-makers the ability to: 1) Interactively view and access a nationwide collection of environmental mercury data (fish tissue, atmospheric emissions and deposition, stream sediments, soils, and coal) and mercuryrelated data (mine locations); 2) Interactively view and access predictions of the National Descriptive Model of Mercury in Fish (NDMMF) at 4,976 sites and 6,829 sampling events (events are unique combinations of site and sampling date) across the United States; and 3) Use interactive mapping and graphing capabilities to visualize spatial and temporal trends and study relationships between mercury and other variables.

Open-File Report↗

USGS2021

Managing water resources on Long Island, New York, with integrated, multidisciplinary science

Nutrients, harmful algal blooms, and synthetic chemicals like per- and polyfluoroalkyl substances (PFAS) and 1,4-dioxane threaten Long Island’s water resources by affecting the quality of drinking water and ecologically sensitive habitats that support the diverse wildlife throughout the island. Understanding the occurrence, fate, and transport of these potentially harmful chemicals is critical to protect these vital resources. The U.S. Geological Survey (USGS) is collecting and analyzing data to support informed water-resource management decisions. This fact sheet introduces ongoing efforts and future areas of study aimed to help water professionals develop a comprehensive science strategy to address contamination of the Long Island aquifer system, the sole source of drinking water for nearly 3 million people. These studies include surface and groundwater collection and groundwater flow modeling. Funding for the data collection has been provided by the USGS, New York State Department of Environmental Conservation, New York City Department of Environmental Protection, Suffolk County Water Authority, Nassau County Department of Public Works, State and local agencies, and Tribal and Federal partners. Without the foresight and long-term commitment of these funding partners, evaluating sustainability and planning for future water needs would not be possible.

New York↗

USGS2019

Nearshore survey and cleanup of benthic marine debris using citizen science divers along the Mediterranean coast of Israel

Information on marine debris along the Mediterranean coast of Israel, especially on the seafloor, is limited. Many recreational divers are enthusiasts of marine conservation and can thus contribute to data collection which does not require highly specialized training. The Society for the Protection of Nature in Israel together with The Israeli Diving Federation established the diver volunteer program “Sea Guard” (“Mishmar Hayam” in Hebrew), which supports marine conservation through citizen science. The divers were trained in marine ecology and survey methods to conduct independent surveys and lead underwater cleanups. For the first time, we have described the patterns of benthic debris density and composition in the nearshore environment of the southeastern part of the Mediterranean Sea. We found that benthic marine debris in the nearshore along the Israeli Mediterranean coast is primarily plastic, likely originating from the use of local beaches. Fishing, boating and domestic activities also play an important role as sources for marine debris. The currents' regime prevented the debris from accumulating on the seafloor in the nearshore environment, with the exception of several “debris traps”. Our findings will be useful for the development of programs to improve coastal waste management.

Ocean and Coastal Management↗

USGS2015

Archive of sediment data from vibracores collected in 2010 offshore of the Mississippi barrier islands

In 2010, scientists from the U.S. Geological Survey St. Petersburg Coastal and Marine Science Center collected sediment cores from coastal waters offshore of the Mississippi barrier islands. With funding support from the Northern Gulf of Mexico (NGOM) Ecosystem Change and Hazard Susceptibility project, 65 subaqueous sediment cores were collected over an area of 480 square kilometers (km 2 ), from Ship Island to Petit Bois Island Pass, Mississippi, within the boundary of Gulf Islands National Seashore. This represents only a fraction of the total area encompassed by the NGOM project, which extends from Sabine Lake, Louisiana, to Perdido Bay, Alabama. The primary objectives of the NGOM project are to understand the evolution of coastal ecosystems on the northern gulf coast, the impact of human activities on these ecosystems, and the vulnerability of ecosystems and human communities to more frequent and intense hurricanes in the future. Selection of the core site locations was based on geophysical surveys conducted around the islands from 2008 to 2010. The surveys, using acoustic systems to image and interpret the nearsurface stratigraphy, were conducted to investigate the geologic controls on island evolution. This data series serves as an archive of sediment data collected from August to September 2010, offshore of the Mississippi barrier islands. Data products, including descriptive core logs, core photographs, results of sediment grain-size analyses, sample location maps, and geographic information system (GIS) data files with accompanying formal Federal Geographic Data Committee (FDGC) metadata can be downloaded from the data products and downloads page.

Mississippi↗

USGS2018

Nearshore coastal bathymetry data collected in 2016 from West Ship Island to Horn Island, Gulf Islands National Seashore, Mississippi

The U.S. Geological Survey (USGS) St. Petersburg Coastal and Marine Science Center, in cooperation with the U.S. Army Corps of Engineers, Mobile District, conducted bathymetric surveys of the nearshore waters surrounding Ship and Horn Islands, Gulf Islands National Seashore, Mississippi. The objective of this study was to establish base-level elevation conditions around West Ship, East Ship, and Horn Islands and their associated active littoral system prior to restoration activities. These activities include the closure of Camille Cut and the placement of sediment in the littoral zone of East Ship Island. These surveys can be compared with future surveys to monitor sediment migration patterns post-restoration and can also be measured against historic bathymetric datasets to further our understanding of island evolution. The USGS collected 667 line-kilometers (km) of single-beam bathymetry data and 844 line-km of interferometric swath bathymetry data in July 2016 under Field Activity Number 2016-347-FA. Data are provided in three datums: (1) the International Terrestrial Reference Frame of 2000 (ellipsoid height); (2) the North American Datum of 1983 (NAD83) CORS96 realization and the North American Vertical Datum of 1988 with respect to the GEOID12B model (orthometric height); and (3) NAD83 (CORS96) and Mean Lower Low Water (tidal datum). Data products, including x,y,z point datasets, trackline shapefiles, digital and handwritten Field Activity Collection Systems logs, 50-meter digital elevation model, and formal Federal Geographic Data Committee metadata, are available for download.

Mississippi↗

USGS2025

Absolute radiometric calibration evaluation of Uncrewed Aerial System (UAS) Headwall and MicaSense sensors and improving data quality using the Empirical Line Method

The use of Uncrewed Aerial Systems (UASs) for remote sensing applications has increased significantly in recent years due to their low cost, operational flexibility, and rapid advancements in sensor technologies. In many cases, UAS platforms are considered viable alternatives to conventional satellite and crewed airborne platforms, offering very high spatial, spectral, and temporal resolution data. However, the radiometric quality of UAS-acquired data has not received equivalent attention, particularly with respect to absolute calibration. In this study, we (1) evaluate the absolute radiometric performance of two commonly used UAS sensors: the Headwall Nano-Hyperspec hyperspectral sensor and the MicaSense RedEdge-MX Dual Camera multispectral system; (2) assess the effectiveness of the Empirical Line Method (ELM) in improving the radiometric accuracy of reflectance products generated by these sensors; and (3) investigate the influence of calibration target characteristics—including size, material type, reflectance intensity, and quantity—on the performance of ELM for UAS data. A field campaign was conducted jointly by the U.S. Geological Survey (USGS) Earth Resources Observation and Science (EROS) Center and the USGS National Uncrewed Systems Office (NUSO) from 15 to 18 July 2023, at the USGS EROS Ground Validation Radiometer (GVR) site in Sioux Falls, South Dakota, USA, over a 160 m × 160 m vegetated area. Absolute calibration accuracy was evaluated by comparing UAS sensor-derived reflectance to in situ measurements of the site. Results indicate that the Headwall Nano-Hyperspec and MicaSense sensors underestimated reflectance by approximately 0.05 and 0.015 reflectance units, respectively. While the MicaSense sensor demonstrated better inherent radiometric accuracy, it exhibited saturation over bright targets due to limitations in its automatic gain and exposure settings. Application of the ELM using just two calibration targets reduced discrepancies to within 0.005 reflectance units. Reflectance products generated using various target materials—such as felt, melamine, or commercially available validation targets—showed comparable agreement with in situ measurements when used with the Nano-Hyperspec sensor. Furthermore, increasing the number of calibration targets beyond two did not yield measurable improvements in calibration accuracy. At a flight altitude of 200 ft above ground level (AGL), a target size of 0.6 m × 0.6 m or larger was sufficient to provide pure pixels for ELM implementation, whereas smaller targets (e.g., 0.3 m × 0.3 m) posed challenges in isolating pure pixels. Overall, the standard manufacturer-recommended calibration procedures were insufficient for achieving high radiometric accuracy with the tested sensors, which may restrict their applicability in scenarios requiring greater accuracy and precision. The use of the ELM significantly improved data quality, enhancing the reliability and applicability of UAS-based remote sensing in contexts requiring high precision and accuracy.

Remote Sensing↗