Search USGS⌕ Search

SEARCH · Search USGS

Results for “Final Technical Report”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

763 records · Page 6Linked to original sources
USGS2026

Importance of fish in the diet of Adélie penguins across multiple life stages

Over recent decades, the Adélie penguin ( Pygoscelis adeliae ) population has grown across most of its range, the exception being the northern coast of the western Antarctic Peninsula (WAP). In the Ross Sea, the very large Cape Crozier colony grew to reach ~9% of the global population. Demographic factors driving the Cape Crozier trend have yet to be identified. However, low chick fledging mass - a negative influence in the northern WAP where the diet is mostly less-energy-dense krill - is not showing an effect in the Cape Crozier colony. Previously, we hypothesized that Cape Crozier fledglings, and post-breeding adults, must be finding sufficient higher-quality prey once free of the prey-depleted colony foraging area, with subsequent higher survival. Here we explore penguin diet within and outside the colony foraging area using stable isotope analysis (SIA) of feathers: those grown by post-breeding adults outside the foraging area, prior to moult, compared to those of near-fledged chicks raised on meals obtained within the foraging area. Second, we explore whether a major difference occurs between breeding and post-breeding diet of adults from a small, nearby colony (Cape Royds) that exploits a smaller, little-depleted preyscape. Finally, we compare the results to SIA analyses published by others to explore whether the pre-moult diet of Ross Island adults, mostly foraging within the north-eastern Ross Sea, compares with that of adults nesting in the southern WAP (Bellingshausen Sea coast). At the latter, populations are not decreasing, with diet containing an appreciable contribution of fish. The results confirmed that fish contributed greatly to chick diets at both Ross Island colonies (δ 15 N 10.6–11.4). Once adults were released from central-place foraging, SIA levels (δ 15 N 9.7–12.9) were similar to those of the southern WAP. Foraging on energy-dense fish in coastal Antarctic waters could be one reason Adélie penguins are among the most abundant and therefore most ecologically successful penguin species.

Antarctic Science↗
USGS2024

Comparing subduction ground-motion models to observations for Cascadia

We evaluate Cascadia subduction ground-motion models (GMMs), considered for the 2023 US National Seismic Hazard Model (NSHM) update, by comparing observations to model predictions. The observations comprise regional recordings from intraslab earthquakes, including contributions from 2021 and 2022 events in southern Cascadia and global records from interface earthquakes. Since the 2018 NSHM update, new GMMs for Cascadia have been published by the Next Generation Attenuation (NGA)-Subduction Project that require independent evaluation. In the regional intraslab comparisons, we highlight a characteristic frequency dependence for Cascadia data, with short periods having lower ground motions and longer periods being comparable to other subduction zones. We evaluate differences in northern and southern Cascadia and find that the NGA-Subduction GMMs developed using southern Cascadia data perform better in this region than the model that did not consider these data. We compare ground-motion variability in Cascadia with the NGA-Subduction model predictions and find differences at short periods ( T = 0.1 s) due to the use of global versus regional data in the development of these models. Moreover, the within-event component of aleatory variability from the GMMs overpredicts the standard deviation of Cascadia recordings at very short periods ( T < 0.05 s). Using global interface earthquakes as a proxy to evaluate the Cascadia GMMs, we find long-period overprediction from a simulation-based GMM and some of the empirical GMMs. When comparing recent observations, we find a similar misfit to GMMs and the 2010 and 2022 Ferndale earthquakes. Finally, we observe different basin amplification factors arising in different subsets of the data, which indicate that differences in basin factors between empirical GMMs could arise from the data selection choices by the developers. As part of evaluating the regional basin terms, we apply basin amplification factors from the magnitude 9 Cascadia earthquake simulations to the empirical GMMs for interface earthquakes. The comparisons presented in this study indicate that the NGA-Subduction GMMs for Cascadia perform well relative to observations and older subduction GMMs.

British Columbia, California, Oregon, Washington↗
USGS2024

Limited evidence of late Quaternary tectonic surface deformation in the eastern Tennessee seismic zone, USA

The ~300-km-long eastern Tennessee seismic zone (ETSZ), USA, is the second-most seismically active region east of the Rocky Mountains. Seismicity generally occurs below the Paleozoic fold-and-thrust belt within the Mesoproterozoic basement, at depths of 5–26 km, and earthquake magnitudes during the instrumental record have been moment magnitude ( M w )≤4.8. Evidence of surface deformation may not exist or be difficult to detect because of the vegetated and soil-mantled landscape, landslides, locally steep topography, anthropogenic landscape modification, or long, irregular recurrence intervals between surface-rupturing earthquakes. Despite the deep seismicity, analog models indicate that accumulation of strike-slip or oblique-slip displacement at depth could be expected to propagate upward through the Paleozoic section, producing a detectable surficial signal of distributed faulting. To identify potential surface deformation, we interrogated the landscape at different spatial scales. We evaluated morphotectonic and channel metrics, such as channel sinuosity and catchment-scale hypsometry. Additionally, we mapped possible fault-related topographic features on 1-m lidar. Finally, we integrated our observations with available bedrock and Quaternary surficial mapping and subsurface geophysical data. At a regional scale, most morphotectonic and channel metrics have a strong lithologic control. Within smaller regions of similar lithology, we observe changes in landscape metrics like channel sinuosity and catchment-scale hypsometry that spatially correlate with new lineaments identified in this study and previously mapped east–west Cenozoic faults. These faults have apparent left-lateral offsets, are optimally oriented to slip in the current stress field, and match kinematics from recent focal mechanisms, but do not clearly preserve evidence of late Pleistocene or Holocene tectonic surface deformation. Most newly mapped lineaments might be explained by either tectonic or non-tectonic origins, such as fluvial or karst processes. We also re-evaluated a previously described paleoseismic site and interpret that the exposure does not record evidence of late Pleistocene faulting but instead is explained by fluvial stratigraphy.

Tennessee↗
USGS2025

Groundwater structures fish growth and production across a riverscape

Landscapes are composed of habitat patches and conditions that vary across space and time. While habitat variability and complexity can support important ecological processes and ecosystem services, the dynamic nature of habitats can also constrain organismal growth and production as optimal conditions are fleeting. In riverine ecosystems, groundwater discharge to streams stabilises water temperature and flow regimes, thus mediating how habitat complexity is expressed. Yet, how stable habitats structure growth and production within the broader landscape matrix is not well understood. In this study, we explored the effects of groundwater on spatiotemporal variation in growth and production for juvenile Yellowstone cutthroat trout ( Oncorhynchus virginalis bouvieri ) across the upper Snake River catchment, Wyoming, USA. We combined machine learning techniques and remotely sensed landscape data to estimate groundwater availability across the river network, which we linked to stream temperature regimes and conspecific density. We then used Bayesian hierarchical models to quantify the effects of temperature, density and groundwater on spatiotemporal variation in fish growth and production in 52 focal reaches. Finally, we predicted body size trajectories and trends in total production continuously over both space and time to understand the effect of groundwater at the riverscape scale. Groundwater discharged to streams where topography changes abruptly in valley-bottom areas underlain by coarse glacial deposits. Groundwater stabilised temperature regimes and was associated with high trout densities. Temperature and density, in turn, interacted to influence growth rates: growth increased strongly with temperature, but this effect was reduced when density was high. Accordingly, variation in groundwater availability among stream reaches diversified growth and production regimes. In reaches with low groundwater availability, growth and production declined over time from summer maxima. In contrast, in reaches with high groundwater availability, temporal trends in growth and production were hump-shaped—peaking in autumn—and mean production was greater. At the riverscape scale, temporal asynchrony in growth rates generated convergent spatial variation in growth capacity, but—when combined with density—led to the formation of distinct hotspots of production. Our results demonstrate how groundwater, an important driver of aquatic ecosystem heterogeneity, structures trout growth and production across space and time. Importantly, rare, but stable habitats may disproportionately affect ecological processes and serve as key sources of population diversity at larger spatial scales.

Wyoming↗
USGS2025

James Buttle review: The characteristics of baseflow resilience across diverse ecohydrological terrains

The dynamic storage of aquifers is the portion of groundwater that can potentially drain to any given point along a stream to create baseflow. Baseflow typically occurs year-round in perennial streams, though the characteristics and stability of dynamic storage are often most important to instream processes during extended dry periods (without precipitation and snowmelt) when runoff and quickflows are minimised. The term ‘baseflow resilience’ is defined for this review as the tendency of baseflow in streams to maintain a consistent volume and water quality year to year while under stress from climate variability and extremes, along with anthropogenic stressors such as water withdrawals, land use change, and water quality degradation. ‘Baseflow resilience’ has, in part, a user-defined meaning spanning water supply and water quality variables of primary interest. Watershed characteristics that directly impact resilience can often produce non-intuitive feedbacks that enhance some attributes of baseflow while simultaneously impairing others. For example, permeable stream corridor geology creates strong stream-groundwater hydrologic connectivity, yet fast groundwater drainage via preferential high-permeability flowpaths can lead to streamflow not being sustained during extended dry periods. Also, shallow groundwater sources are generally more immediately vulnerable to extreme events, warming, salinization, transpiration, and precipitation drought, compared to deeper groundwater. Yet baseflow drought in streams influenced by deeper groundwater can lag precipitation drought by years, and contaminant legacies may propagate through deep groundwater flowpaths to receiving waters for decades to centuries. Finally, irrigation withdrawals can intercept groundwater that would have drained to streams, and the application of irrigation may leach contaminants from the soil zone by unnaturally raising water tables, yet irrigation return flows can sustain baseflow and groundwater-dependent habitats in semiarid areas. This review covers the concept of hydrologic resilience in the context of stream baseflow processes and summarises the common hydrogeological controls on, and multiscale stressors of, dynamic groundwater storage. Further, we present several quantitative metrics to assess a range of water supply to water quality baseflow characteristics using both broadly available and boutique data types, a subset of which are demonstrated using data from the Delaware River Basin, USA.

Delaware River Basin↗
USGS2026

Evolution of arsenic speciation during thermal treatment simulating wildfire heating in arsenic-rich sediments

Understanding arsenic transformations during wildfires can help better constrain the environmental impacts of increased wildfire intensity, frequency, and burned area. Previous studies have monitored the evolution of metal(loid) speciation at specific time/temperature endpoints, hampering the comprehension of the dynamic transformations of metal(loid)s during wildfires. Here, a novel approach, namely in situ time-resolved X-ray absorption near edge structure (TR-XANES) spectroscopy, was used for the first time to monitor the heat-induced redox transformations of arsenic (As) in two As-rich sediments with different characteristics. No arsenic transformations were observed in either sediment at room temperature or when the sediments were heated to a maximum temperature of 400 ºC. When heated to a maximum temperature of 600 or 700 ºC, As underwent complex, dynamic, and partially reversible redox transformations, the extent of which varied with sediment properties, initial As speciation, and heating temperature and duration. In the case of sediments initially containing As(V) and a low sulfide/sulfate ratio, the As(V) was reduced to As(III) over a short period of time, followed by immediate reoxidation of As(III) to As(V). The extent of the transient As reduction increased with increasing maximum temperature. The final As speciation at the end of the heating experiment was not substantially different from that at the beginning of the experiment. In contrast, in sediments that were best described by a more complex combination of reference compounds (As(V) coprecipitated with or adsorbed on iron oxide, arseniosiderite, arsenopyrite) with a high sulfide/sulfate ratio, As(V) phases were reduced to As(III) and As(III) was further reduced to As(-I) (at 700 ºC, only), followed by delayed reoxidation of As(-I) to As(III) (at 700 ºC, only) and reoxidation of As(III) to As(V). Approximately 9% and 26% of all As remained as As(III) ( i.e., was not reoxidized to As(V)) at the end of the experiment when heated to a maximum temperature of 600 and 700 ºC, respectively, which is higher than the relative abundance of As(III) in the native sediment. These fire-induced As transformations can potentially enhance As mobilization to surface water and groundwater, posing risks to environmental and human health.

California↗
USGS2025

Identifying precursors and tracking pulses of magma ascent in multidisciplinary data during the 2018–2023 phreatomagmatic eruption at Semisopochnoi Island, Alaska

The 2018–2023 phreatomagmatic eruptions at Semisopochnoi Island, Alaska produced abundant long-period (LP) seismicity, harmonic and broadband tremor, and explosion signals over several well-monitored periods of eruption and quiescence. The corresponding dataset provides an excellent opportunity to investigate precursory and syn -eruptive geophysical signals of long-lived phreatomagmatic eruptions using multiparameter observations. We generated explosion and LP event catalogs through novel implementations of the REDPy ( Hotovec-Ellis, 2024 ) repeating event detector in mid-2021 following a network upgrade and the onset of a new phase of the eruption. The hundreds of detected explosions show a high degree of infrasound waveform similarity over more than a year, indicating a repeating source mechanism likely associated with explosive magma-water interaction. The seismic LP catalog shows that events began over a month prior to renewed explosive activity at the beginning of August 2021, and that lower frequency index (FI) LPs were generated in the week prior to the onset of explosions. We applied a recently developed machine learning tool (VOISS-Net, Tan et al., 2024 ) to catalog abundant broadband and harmonic seismic tremor recorded before and during the renewed explosive activity, along with LPs and explosions. The tremor catalogs complement the LP and explosion catalogs by filling out the seismic sequence with the dominant signal types. Together, these catalogs reveal a seismic sequence of renewed unrest that started with several weeks of LP events, followed by LPs with lower FI values and harmonic tremor in the days prior to explosive activity, and finally the onset of discrete explosions and broadband eruption tremor. We interpret this sequence as the ascent of a new pulse of magma that first interacted with the hydrothermal/groundwater system to produce LPs, followed by harmonic tremor, and that ultimately drove explosive magma-water interactions and periods of continuous ash emissions. The 2021 seismic sequence, in combination with long-term records of satellite SO 2 emissions, deformation from interferometric synthetic aperture radar (InSAR) analysis, ash sample analysis, infrasound, and volcano tectonic seismicity, allows us to interpret the entire 9-year period of unrest and eruption that began with an intrusion and earthquake swarm in 2014.

Alaska↗
USGS2025

Factors affecting the distribution of water-bearing fractures in the bedrock aquifers of West Virginia

Bedrock aquifers cover 23,601 square miles within the State of West Virginia and comprise 97.4 percent of the surficial area within the State; the remaining 2.6 percent (621 square miles) consists of alluvial sand-and-gravel and glacial outwash aquifers bordering the State’s major rivers. While West Virginia’s alluvial aquifers have been studied extensively, bedrock aquifers have only been characterized for studies completed in a few areas in Jefferson, McDowell, and Monroe Counties. Bedrock aquifers are water supplies for public supply, agriculture, industry, and residential homeowner use. In this study, the U.S. Geological Survey, in cooperation with the West Virginia Department of Environmental Protection Division of Water and Waste Management, provides a statewide assessment of the occurrence and distribution of fractures within bedrock aquifers of the State and the various topographic, physiographic, and lithologic influences controlling the occurrence and distribution of bedrock fractures. The results of this study provide an increased understanding of the distribution of fractures in bedrock aquifers in West Virginia and help to verify trends that have been suspected for many years but were never well documented or verified by data. The results confirmed that the density of fractures and those that were determined to be water bearing decrease significantly with depth. A statistically significant difference in the density of fractures was observed at a depth of 215 feet for wells in the Appalachian Plateaus Physiographic Province’s and in the Valley and Ridge Physiographic Province’s aquifers; a higher density of fractures and water-bearing fractures were above a depth of 215 feet than below that depth. This is an important consideration when drilling wells for residential, commercial, industrial, or agricultural water supply. Abandoned underground coal mines are commonly believed to form large pools of water in the interconnected mine entries in abandoned room and pillar coal mines. Such pools of water can and do exist in abandoned underground coal mines, but many mines lack open entries and are held up by overburden strata and pillars that can collapse and form aquifers comprised of vast interconnected rubble zones (gob), especially in older mines. Data assessed for this study showed that shale-corrected values of effective porosity for limestone aquifers in West Virginia had a median value of 2 percent and an average value of 4 percent and generally are mineralized with low effective porosity. Argillaceous or sandy limestone has a median shale-corrected porosity of 4 percent and an average shale-corrected porosity of 5 percent. The median and average shale-corrected porosity of sandstone aquifers was estimated to be 14 percent, but the median shale-corrected porosity for argillaceous or calcareous sandstone was 5 percent and the average shale-corrected porosity for argillaceous or calcareous sandstone was 6 percent. Even though shale has a relatively high total sonic porosity compared to other lithologies, shale and siltstone had relatively low shale-corrected porosity, ranging from 0 to 2 percent. Well yields were previously documented to be highest in valley settings, lowest on hilltops, and intermediate on hillsides. Transmissivity data provided by this study confirm this general pattern within the Appalachian Plateaus Province; however, the Valley and Ridge Province does not follow this pattern. While still lowest on hilltop settings, the highest well yields were in hillside settings. The trend for the Valley and Ridge Province was likely skewed because of 9 high-yield wells specifically targeting deeper thin limestone units, such as the Tonoloway and Helderberg Limestones, at depths with transmissivity in excess of 2,000 feet squared per day in Mineral County, West Virginia, or targeting karst aquifers in Berkeley, Jefferson, or Greenbrier Counties, West Virginia. Finally, water-bearing fractures have been hypothesized to comprise a small number of all fractures within a typical bedrock well in West Virginia. Data collected for this study support this theory. A total of 3,403 fractures were identified during this study; 3,151 (92.6 percent) of those fractures are low-transmissive, and only 252 (7.4 percent) fractures are water-bearing. Even though a well may contain many fractures, less than 8 percent are considered water-bearing fractures.

West Virginia↗
USGS2024

Simulated mean monthly groundwater-transported nitrogen loads in watersheds on the north shore of Long Island Sound, 1993–2022

Elevated nitrogen loads are pervasive in the Long Island Sound, an estuary that receives freshwater and nutrients from both surface-water and groundwater discharge. Surface-water nitrogen loads to the Long Island Sound are relatively well characterized, but less is known about groundwater-transported nitrogen loads. Prior work on the northern shore of Long Island Sound (Connecticut and areas of New York and Rhode Island) suggested that groundwater travel times are relatively short (median less than 2 years) and that decade-long nutrient legacies are not widespread. Because the travel times are short, groundwater flow and nutrient loads likely vary substantially between months. In the current study, the U.S. Geological Survey, in cooperation with the U.S. Environmental Protection Agency’s Long Island Sound Study and the Connecticut Department of Energy and Environmental Protection, developed a set of models to better characterize spatial and temporal patterns of groundwater-transported nitrogen loading from atmospheric deposition, septic systems, and fertilizers within the study area. The models provide an estimate, with uncertainty, of groundwater-transported nitrogen loads in the study area, filling a key gap in the nitrogen budget for Long Island Sound. The models also highlight the spatial and temporal variation in nitrogen loading throughout the study area. The modeling workflow involved four models. (1) A soil-water-balance model was developed by using the Soil-Water-Balance software to simulate groundwater recharge across the study area for water years 2005 through 2022. The simulated mean monthly recharge from the soil-water-balance model was used as input into a groundwater-flow model. (2) The groundwater-flow model was developed by using the MODFLOW 6 software and data for water years 1993 through 2022 and simulates average monthly hydrologic conditions. The groundwater-flow model was calibrated by using the Iterative Ensemble Smoother method within the PEST++ software. The Iterative Ensemble Smoother method generates an ensemble of sets of parameter values, with each set producing reasonable simulated hydrologic parameter values. (3) An ensemble of MODPATH particle-tracking simulations were run to generate particle flow paths and travel times, with each simulation using a different set of the flow model parameters. (4) A nitrogen load model uses the MODPATH simulation outputs to track nitrogen from the land surface through multiple attenuation zones until it discharges into fresh or saline surface water. As with the groundwater-flow model, the nitrogen model simulated average monthly groundwater-transported nitrogen loads for water years 1993 through 2022. One novel aspect of the nitrogen load model is that the nitrogen attenuation parameters were calibrated to observed nitrogen loads. Across the ensemble of simulated nitrogen loads, the median study-area-wide monthly simulated nitrogen loads from the aquifer to Long Island Sound throughout the year ranged from 900 to 18,600 kilograms of nitrogen per day, with a median load of 5,100 kilograms of nitrogen per day. The simulated loads were based on average monthly conditions for water years 1993 through 2022. Loads were highest during the winter and early spring and lowest during the late summer. However, simulated travel times for groundwater and nitrogen loads discharged to Long Island Sound during summer were longer than travel times for groundwater and loads discharged during the winter, indicating that, on average, groundwater discharged during summer traveled along different, and longer, flow paths, than groundwater discharged during winter. This indicates that summer loads would respond more slowly to changes in nitrogen inputs at the water table than winter loads. Over the entire study area, approximately 15 percent of the simulated load is from atmospheric deposition sources, 30 to 40 percent is from fertilizer, and 50 to 60 percent is from septic systems. The final analysis of the study involved simulating the change in groundwater-transported nitrogen load in response to upgrading septic systems or reducing fertilizing inputs to areas of turf grass. Both management interventions reduced the groundwater-transported nitrogen load, and reductions were greater in areas with greater loads from septic systems or turf-grass fertilizers. The delay between management actions and substantial reductions in groundwater-transported nitrogen loads varied seasonally; loads during the late summer months remained elevated longer than the winter loads.

Connecticut, Rhode Island↗
USGS2025

Permafrost–wildfire interactions: active layer thickness estimates for paired burned and unburned sites in northern high latitudes

As the northern high-latitude permafrost zone experiences accelerated warming, permafrost has become vulnerable to widespread thaw. Simultaneously, wildfire activity across northern boreal forest and Arctic/subarctic tundra regions impacts permafrost stability through the combustion of insulating organic matter, vegetation, and post-fire changes in albedo. Efforts to synthesis the impacts of wildfire on permafrost are limited and are typically reliant on antecedent pre-fire conditions. To address this, we created the FireALT dataset by soliciting data contributions that included thaw depth measurements, site conditions, and fire event details with paired measurements at environmentally comparable burned and unburned sites. The solicitation resulted in 52 466 thaw depth measurements from 18 contributors across North America and Russia. Because thaw depths were taken at various times throughout the thawing season, we also estimated end-of-season active layer thickness (ALT) for each measurement using a modified version of the Stefan equation. Here, we describe our methods for collecting and quality-checking the data, estimating ALT, the data structure, strengths and limitations, and future research opportunities. The final dataset includes 48 669 ALT estimates with 32 attributes across 9446 plots and 157 burned–unburned pairs spanning Canada, Russia, and the United States. The data span fire events from 1900 to 2022 with measurements collected from 2001 to 2023. The time since fire ranges from 0 to 114 years. The FireALT dataset addresses a key challenge: the ability to assess impacts of wildfire on ALT when measurements are taken at various times throughout the thaw season depending on the time of field campaigns (typically June through August) by estimating ALT at the end-of-season maximum. This dataset can be used to address understudied research areas, particularly algorithm development, calibration, and validation for evolving process-based models as well as extrapolating across space and time, which could elucidate permafrost–wildfire interactions under accelerated warming across the high-northern-latitude permafrost zone. The FireALT dataset is available through the Arctic Data Center ( https://doi.org/10.18739/A2RN3092P , Talucci et al., 2024).

Arctic↗
USGS2023

Hydrogeology, karst, and groundwater availability of Monroe County, West Virginia

Monroe County is in southeastern West Virginia, encompassing an area of 474 square miles. The area consists of karst and siliciclastic aquifers of Ordovician, Silurian, Devonian, and Mississippian age and is in parts of two physiographic provinces: the Valley and Ridge Province to the east of Peters Mountain, and the Appalachian Plateau Province to the west of Peters Mountain. This study was developed in response to inquiries from the Monroe County Commission requesting assessment of the water resources of the county to better understand the quantity of the county’s groundwater resources, for both current [2023] and future demand, and to provide information to support protection and management of the county’s valuable groundwater resources. Various products were developed for this study that provide knowledge with respect to water availability and contamination susceptibility of the karst aquifers within the county. U.S. Geological Survey (USGS) geologists conducted extensive geologic mapping in support of the project, producing (1) a countywide bedrock geologic map, (2) a countywide hydrogeologic map, and (3) a light detection and ranging (lidar)-derived countywide digital elevation model and associated sinkhole map. A significant part of this work was to map in detail the Greenbrier Group at the formation level, which prior to this study had only partially been completed. The report also includes (4) a description of the lithologic units identified as part of the geologic mapping process. U.S. Geological Survey hydrologists completed several additional products for the hydrology part of the effort, including development of (1) a countywide potentiometric surface (water-table) map, (2) a countywide base-flow stream assessment, (3) countywide water-budget estimates, (4) well log surveys for 15 wells to better understand subsurface controls on groundwater flow within the study area, (5) two groundwater tracer tests to better refine the groundwater divide from the northern and southern parts of the karst aquifer in Monroe County; and finally, based on all available data collected for the study including the potentiometric surface map, geologic map, current [2023] and legacy fluorometric groundwater tracer tests, and base-flow stream assessments, (6) groundwater-basin delineations were reassessed for principal groundwater basins within the Greenbrier aquifer. In Monroe County, four principal hydrogeologic settings produce large yields of water for residential, agricultural, and other uses. The most relied upon water-bearing zone with respect to current [2023] public water supply is from springs along Peters Mountain. These springs are derived from intervals of fractured sandstone and resultant alluvial deposits. Groundwater flows downslope through these permeable alluvial deposits and discharges at the contact with less permeable strata, such as the Reedsville Shale. The second most relied upon water-bearing zone in Monroe County is within the karstic Greenbrier Group aquifer, in which the basal Hillsdale Limestone overlies the less permeable Maccrady Shale. This geologic contact between the Hillsdale Limestone and Maccrady Shale is not only targeted as a source of water for agricultural supply but also is targeted as a source of water for residential supply. The third most relied upon water-bearing zone is composed of shallow perched aquifers within the Greenbrier Group. The discontinuous nature of these perched aquifers makes mapping their extent impossible, but they are related to permeable geologic strata, such as karstified limestones with solutionally enhanced permeability that overlies less permeable shale or chert bedrock. During geologic mapping of the county, several of these perched aquifers were documented in the Pickaway, Union, and Alderson Limestones. A fourth zone consists of springs from Ordovician carbonates at the base of Peters Mountain, which are influenced by sinking streams as well as upwelling along faults. In terms of water quantity, the most sustainable springs are those having deeper-sourced flows. Public supplies are a principal source of water used for residential and commercial supply in the region, accounting for 0.49 million gallons per day (Mgal/d) of fresh-water withdrawals (0.14 Mgal/d of groundwater and 0.35 Mgal/d of surface water) for residential and commercial use and serving 6,645 individuals (49.2 percent of the population). An estimated 6,861 people, (50.8 percent of the population) primarily rely on private wells or other unregulated sources, such as springs, and withdraw 0.55 Mgal/d of groundwater for their residential use. Public water supply in the region is primarily (71.4 percent) derived from springs and augmented by stream withdrawals (backup sources mainly during low-flow periods), with the remaining portion (28.6 percent) derived from groundwater withdrawals from wells. For rural residents, however, 100 percent of their withdrawals are derived from groundwater (wells or springs).

West Virginia↗
USGS2021

Geology, mineralogy, and cassiterite geochronology of the Ayawilca Zn-Pb-Ag-In-Sn-Cu deposit, Pasco, Peru

The Ayawilca deposit in Pasco, Peru, represents the most significant recent base-metal discovery in the central Andes and one of the largest undeveloped In resources globally. As of 2018, it hosts an 11.7 Mt indicated resource grading 6.9% Zn, 0.16% Pb, 15 g/t Ag, and 84 g/t In, an additional 45.0 Mt inferred resource grading 5.6% Zn, 0.23% Pb, 17 g/t Ag, and 67 g/t In, and a separate Sn-Cu-Ag inferred resource of 14.5 Mt grading 0.63% Sn, 0.21% Cu, and 18 g/t Ag. Newly obtained U–Pb dates for cassiterite by LA-ICP-MS (22.77 ± 0.41 and 23.05 ± 2.06 Ma) assign the Ayawilca deposit to the Miocene polymetallic belt of central Peru. The polymetallic mineralization occurs as up to 70-m-thick mantos hosted by carbonate rocks of the Late Triassic to Early Jurassic Pucará Group, and subordinately, as steeply dipping veins hosted by rocks of the Pucará Group and overlying Cretaceous sandstones-siltstones of the Goyllarisquizga Group. Relicts of a distal retrograde magnesian skarn and cassiterite (stage pre-A) were identified in the deepest mantos. The volumetrically most important mineralization at Ayawilca comprises a low-sulfidation assemblage (stage A) with quartz, pyrrhotite, arsenopyrite, chalcopyrite, Fe-rich sphalerite, and traces of stannite and herzenbergite. Stage A sphalerite records progressive Fe depletion, from 33 to 10 mol% FeS, which is compatible with the observed transition from low- to a subsequent intermediate-sulfidation stage (B) marked by the crystallization of abundant pyrite and marcasite. Finally, during a later intermediate-sulfidation stage (C) sphalerite (up to 11 mol% FeS), galena, native bismuth, Cu-Pb-Ag sulfosalts, siderite, Mn-Fe carbonates, kaolinite, dickite, and sericite were deposited. This paragenetic evolution shows striking similarities with that at the Cerro de Pasco Cordilleran-type polymetallic deposit, even if at Ayawilca stage C did not reach high-sulfidation conditions. The occurrence of an early retrograde skarn assemblage suggests that the manto bodies at Ayawilca formed at the transition between distal skarn and skarn-free (Cordilleran-type) carbonate-replacement mineralization. Mineral assemblages define a T- f S 2 evolutionary path close to the pyrrhotite-pyrite boundary. Buffering of hydrothermal fluids by underlying Devonian carbonaceous phyllites of the Excelsior Group imposed highly reduced conditions during stage A mineralization (log f O 2 < − 30 atm). The low f O 2 favored efficient Sn mobility during stages pre-A and A, in contrast to other known ore deposits in the polymetallic belt of central Peru, in which the occurrence of Sn minerals is minor. Subsequent cooling, progressive sealing of vein walls, and decreasing buffering potential of the host rocks promoted the shift from low- (stage A) to intermediate-sulfidation (stages B and C) states. LA-ICP-MS analyses reveal significant In contents in Fe-rich sphalerite (up to 1.7 wt%), stannite (up to 1908 ppm), and chalcopyrite (up to 1185 ppm). The highest In content was found in stage A sphalerite that precipitated along with chalcopyrite and stannite, thus pointing to the early, low-sulfidation assemblage as prospective for this high-tech metal in similar mineral systems. Indium was likely incorporated into the sphalerite crystal lattice via Cu + + In 3+ ↔ 2 Zn 2+ and (Sn, Ge) 4+ + (Ga, In) 3+ + (Cu + Ag) + ↔ 4 Zn 2+ coupled substitutions. Indium incorporation mechanisms into the stannite and chalcopyrite crystal lattices remain unclear.

Pasco↗
USGS2025

The National Map Corps—Federal Emergency Management Agency and Oak Ridge National Laboratory pilot project report

This report provides an overview of the U.S. Geological Survey National Map Corps —Federal Emergency Management Agency and Oak Ridge National Laboratory pilot project in St. James Parish, Louisiana, that began in February 2024 and ended at the end of March 2024. The project used the power of The National Map Corps’ volunteer community to improve building classifications in the original Federal Emergency Management Agency’s U.S.A. Structures dataset. The report highlights the project’s completion and details the work and results achieved through a collaborative effort to enhance geospatial data quality and utility.

Open-File Report↗
USGS2025

Woods Hole Coastal and Marine Science Center—2023 annual report

The 2023 annual report of the U.S. Geological Survey Woods Hole Coastal and Marine Science Center highlights accomplishments of 2023, includes a list of 2023 publications, and summarizes the work of the center, as well as the work of each of its science groups. This product allows readers to gain a general understanding of the focus areas of the center’s scientific research and learn more about specific projects and progress made throughout 2023, all while enjoying photographs taken in various environments and laboratories, and applicable maps and figures.

Circular↗