SEARCH · Search USGS

Results for “Chemical Physics”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 991 records · Page 55Linked to original sources

USGS2010

Can we improve the salinity tolerance of genotypes of Taxodium by using varietal and hybrid crosses?

Taxodium distichum (L.) Rich. var. distichum [baldcypress (BC)], Taxodium distichum var. mexicanum Gordon [Montezuma cypress (MC)], and a Taxodium hybrid (\'Nanjing Beauty\': BC x MC cross, T302) were evaluated for salt tolerance in 2006 at Nacogdoches, TX. Plants were irrigated weekly with four levels of salinity [0, 1, 3.5, and 6 ppt (0, 17, 60, and 102 mol*m -3 )] for 13 weeks and then 0, 2, 7, and 12 ppt (0, 34, 120, and 204 mol*m -3 ) for another 12 weeks. Salinity treatments did not have a significant effect on growth rate; however, there were significant differences in growth rate among the three genotypes. Genotype T302 produced the greatest wet weight, whereas MC had stronger apical dominance and exhibited the greatest increase in height over the course of study. As expected, sodium (Na) concentration in Taxodium leaves increased as sea salt concentrations increased but did not tilt Na/potassium (K) ratios to stressful disproportions. Of the three genotypes, BC exhibited the highest leaf content of Na, calcium (Ca), sulfur (S), and iron (Fe); MC had the lowest leaf content of Na, Ca, S, and Fe; and T302 was intermediate. The benefits of using a hybrid cross (T302) that maintains greater biomass than BC or MC across a range of salinities must be weighed against the potential additional pruning and training necessary for cutting-grown clones relative to BC and MC propagated from seed and flood tolerance relative to BC. Still, combining the best characteristics of different varieties of T. distichum should facilitate the production of favorable genotypes tolerant to a number of soil physical and chemical property fluctuations for arboricultural operations.

HortScience↗

USGS2003

Herbicides and herbicide degradation products in upper midwest agricultural streams during august base-flow conditions

Herbicide concentrations in streams of the U.S. Midwest have been shown to decrease through the growing season due to a variety of chemical and physical factors. The occurrence of herbicide degradation products at the end of the growing season is not well known. This study was conducted to document the occurrence of commonly used herbicides and their degradation products in Illinois, Iowa, and Minnesota streams during base-flow conditions in August 1997. Atrazine, the most frequently detected herbicide (94%), was present at relatively low concentrations (median 0.17 μg L −1 ). Metolachlor was detected in 59% and cyanazine in 37% of the samples. Seven of nine compounds detected in more than 50% of the samples were degradation products. The total concentration of the degradation products (median of 4.4 μg L −1 ) was significantly greater than the total concentration of parent compounds (median of 0.26 μg L −1 ). Atrazine compounds were present less frequently and in significantly smaller concentrations in streams draining watersheds with soils developed on less permeable tills than in watersheds with soils developed on more permeable loess. The detection and concentration of triazine compounds was negatively correlated with antecedent rainfall (April–July). In contrast, acetanalide compounds were positively correlated with antecedant rainfall in late spring and early summer that may transport the acetanalide degradates into ground water and subsequently into nearby streams. The distribution of atrazine degradation products suggests regional differences in atrazine degradation processes.

Midwest region↗

USGS2009

Soil nitrogen balance under wastewater management: Field measurements and simulation results

The use of treated wastewater for irrigation of crops could result in high nitrate-nitrogen (NO3-N) concentrations in the vadose zone and ground water. The goal of this 2-yr field-monitoring study in the deep silty clay loam soils south of Dodge City, Kansas, was to assess how and under what circumstances N from the secondary-treated, wastewater-irrigated corn reached the deep (20-45 m) water table of the underlying High Plains aquifer and what could be done to minimize this problem. We collected 15.2-m-deep soil cores for characterization of physical and chemical properties; installed neutron probe access tubes to measure soil-water content and suction lysimeters to sample soil water periodically; sampled monitoring, irrigation, and domestic wells in the area; and obtained climatic, crop, irrigation, and N application rate records for two wastewater-irrigated study sites. These data and additional information were used to run the Root Zone Water Quality Model to identify key parameters and processes that influence N losses in the study area. We demonstrated that NO3-N transport processes result in significant accumulations of N in the vadose zone and that NO3-N in the underlying ground water is increasing with time. Root Zone Water Quality Model simulations for two wastewater-irrigated study sites indicated that reducing levels of corn N fertilization by more than half to 170 kg ha-1 substantially increases N-use efficiency and achieves near-maximum crop yield. Combining such measures with a crop rotation that includes alfalfa should further reduce the accumulation and downward movement of NO3-N in the soil profile. Copyright ?? 2009 by the American Society of Agronomy, Crop Science Society of America, and Soil Science Society of America. All rights reserved.

Journal of Environmental Quality↗

USGS2014

Soil-plant-microbial relations in hydrothermally altered soils of Northern California

Soils developed on relict hydrothermally altered soils throughout the Western USA present unique opportunities to study the role of geology on above and belowground biotic activity and composition. Soil and vegetation samples were taken at three unaltered andesite and three hydrothermally altered (acid-sulfate) sites located in and around Lassen VolcanicNational Park in northeastern California. In addition, three different types of disturbed areas (clearcut, thinned, and pipeline) were sampled in acid-sulfate altered sites. Soils were sampled (0–15 cm) in mid-summer 2010 from both under-canopy and between-canopy areas within each of the sites. Soils were analyzed for numerous physical and chemical properties along with soil enzyme assays, C and N mineralization potential, microbial biomass-C and C-substrate utilization. Field vegetation measurements consisted of canopy cover by life form (tree, shrub, forb, and grass), tree and shrub density, and above-ground net primary productivity of the understory. Overall, parameters at the clearcut sites were more similar to the unaltered sites, while parameters at the thinned and pipeline sites were more similar to the altered sites. We employed principal components analysis (PCA) to develop two soil quality indices (SQI) to help quantify the differences among the sites: one based on the correlation between soil parameters and canopy cover, and the second based on six sub-indices. Soil quality indices developed in these systems could provide a means for monitoring and identifying key relations between the vegetation, soils, and microorganisms.

California↗

USGS2007

Research activities at U.S. Government agencies in subsurface reactive transport modeling

The fate of contaminants in the environment is controlled by both chemical reactions and transport phenomena in the subsurface. Our ability to understand the significance of these processes over time requires an accurate conceptual model that incorporates the various mechanisms of coupled chemical and physical processes. Adsorption, desorption, ion exchange, precipitation, dissolution, growth, solid solution, redox, microbial activity, and other processes are often incorporated into reactive transport models for the prediction of contaminant fate and transport. U.S. federal agencies use such models to evaluate contaminant transport and provide guidance to decision makers and regulators for treatment issues. We provide summaries of selected research projects and programs to demonstrate the level of activity in various applications and to present examples of recent advances in subsurface reactive transport modeling.

Vadose Zone Journal↗

USGS2016

Structured heterogeneity in a marine terrace chronosequence: Upland mottling

Soil mottles generally are interpreted as a product of reducing conditions during periods of water saturation. The upland soils of the Santa Cruz, CA, marine terrace chronosequence display an evolving sequence of reticulate mottling from the youngest soil (65 ka) without mottles to the oldest soil (225 ka) with well-developed mottles. The mottles consist of an interconnected network of clay and C-enriched regions (gray, 2.5Y 6/1) bordered by leached parent material (white, 2.5Y 8/1) within a diminishing matrix of oxidized parent material (orange, 7.5YR 5/8). The mottles develop in soils that formed from relatively uniform nearshore sediments and occur below the depth of soil bioturbation. To explore how a presumably wetland feature occurs in an unsaturated upland soil, physical and chemical characteristics of mottle separates (orange, gray, and white) were compared through the deep time represented by the soil chronosequence. Mineralogical, isotopic, and surface-area differences among mottle separates indicate that rhizogenic centimeter-scale mass transfer acting across millennia is an integral part of weathering, pedogenesis, and C and nutrient transfer. Elemental analysis, electron microscopy, and Fe-isotope systematics indicate that mottle development is driven by deep roots together with their fungal and microbial symbionts. Taken together, these data suggest that deep soil horizons on old stable landforms can develop reticulate mottling as the long-term imprint of rhizospheric processes. The processes of rhizogenic mottle formation appear to regulate pedogenesis, nutrients, and C sequestration at depth in unsaturated zones.

California↗

USGS2018

UZIG research: Measurement and characterization of unsaturated zone processes under wide-ranging climates and changing conditions

Unsaturated zone properties and processes are central to understanding the interacting effects of land-use change, contamination, and hydroclimate on our ability to grow food, sustain clean water supplies, and minimize loss of life and property. Advances in unsaturated zone science are being achieved through collaborations across traditional boundaries where information from biological, physical, and chemical disciplines is combined for new insights. The Unsaturated Zone Interest Group (UZIG) is an organization that exists principally to promote multidisciplinary collaborations and the sharing of ideas, expertise, and technical assets. Here we summarize key findings from 14 papers, several of which originated from a meeting convened by UZIG in 2017 at the University of Florida in Gainesville titled “Land-Use Change, Climate Change, and Hydrologic Extremes: Unsaturated Zone Responses and Feedbacks.” This special section of Vadose Zone Journal contains multidisciplinary research in three general categories relevant to measuring and understanding unsaturated zone responses to changing land uses and climate: (i) unsaturated zone properties and processes; (ii) soil–plant–atmosphere interactions; and (iii) novel field sampling devices. A strong cross-cutting theme in these papers is the value of continuous monitoring data and ways of utilizing them to discover novel hydrologic, biologic, and pedologic information. As climatic and land-use conditions change and demands for resources and stresses on ecosystems continue to intensify, it is vital to improve our fundamental understanding of the processes at work in the unsaturated zone. Toward that goal, we discuss the need for improved ground-based unsaturated zone monitoring networks.

Vadose Zone Journal↗

USGS2006

Intensity of quartz cathodoluminescence and trace-element content in quartz from the porphyry copper deposit at Butte, Montana

Textures of hydrothermal quartz revealed by cathodoluminescence using a scanning electron microscope (SEM-CL) reflect the physical and chemical environment of quartz formation. Variations in intensity of SEM-CL can be used to distinguish among quartz from superimposed mineralization events in a single vein. In this study, we present a technique to quantify the cathodoluminescent intensity of quartz within individual and among multiple samples to relate luminescence intensity to specific mineralizing events. This technique has been applied to plutonic quartz and three generations of hydrothermal veins at the porphyry copper deposit in Butte, Montana. Analyzed veins include early quartz-molybdenite veins with potassic alteration, pyrite-quartz veins with sericitic alteration, and Main Stage veins with intense sericitic alteration. CL intensity of quartz is diagnostic of each mineralizing event and can be used to fingerprint quartz and its fluid inclusions, isotopes, trace elements, etc., from specific mineralizing episodes. Furthermore, CL intensity increases proportional to temperature of quartz formation, such that plutonic quartz from the Butte quartz monzonite (BQM) that crystallized at temperatures near 750 ??C luminesces with the highest intensity, whereas quartz that precipitated at ???250 ??C in Main Stage veins luminesces with the least intensity. Trace-element analyses via electron microprobe and laser ablation-ICP-MS indicate that plutonic quartz and each generation of hydrothermal quartz from Butte is dominated by characteristic trace amounts of Al, P, Ti, and Fe. Thus, in addition to CL intensity, each generation of quartz can be distinguished based on its unique trace-element content. Aluminum is generally the most abundant element in all generations of quartz, typically between 50 and 200 ppm, but low-temperature, Main Stage quartz containing 400 to 3600 ppm Al is enriched by an order of magnitude relative to all other quartz generations. Phosphorous is present in abundances between 25 and 75 ppm, and P concentrations in quartz show little variation among quartz generations. Iron is the least abundant of these elements in most quartz types and is slightly enriched in CL-dark quartz in pyrite-quartz veins with sericitic alteration. Titanium is directly correlated with both temperature of quartz precipitation, and intensity of quartz luminescence, such that BQM quartz contains hundreds of ppm Ti, whereas Main Stage quartz contains less than 10 ppm Ti. Our results suggest that Ti concentration in quartz is controlled by temperature of quartz precipitation and that increased Ti concentrations in quartz may be responsible for increased CL intensities.

American Mineralogist↗

USGS2000

Stable isotope systematics of sulfate minerals

Stable isotope studies of sulfate minerals are especially useful for unraveling the geochemical history of geological systems. All sulfate minerals can yield sulfur and oxygen isotope data. Hydrous sulfate minerals, such as gypsum, also yield oxygen and hydrogen isotope data for the water of hydration, and more complex sulfate minerals, such as alunite and jarosite also yield oxygen and hydrogen isotope data from hydroxyl sites. Applications of stable isotope data can be divided into two broad categories: geothermometry and tracer studies. The equilibrium partitioning of stable isotopes between two substances, such as the isotopes of sulfur between barite and pyrite, is a function of temperature. Studies can also use stable isotopes as a tracer to fingerprint various sources of hydrogen, oxygen, and sulfur, and to identify physical and chemical processes such as evaporation of water, mixing of waters, and reduction of sulfate to sulfide. Studies of sulfate minerals range from low-temperature surficial processes associated with the evaporation of seawater to form evaporite deposits to high-temperature magmatic-hydrothermal processes associated with the formation of base-and precious-metal deposits. Studies have been conducted on scales from submicroscopic chemical processes associated with the weathering of pyrite to global processes affecting the sulfur budget of the oceans. Sulfate isotope studies provide important information to investigations of energy and mineral resources, environmental geochemistry, paleoclimates, oceanography (past and present), sedimentary, igneous, and metamorphic processes, Earth systems, geomicrobiology, and hydrology. One of the most important aspects of understanding and interpreting the stable isotope characteristics of sulfate minerals is the complex interplay between equilibrium and kinetic chemical and isotopic processes. With few exceptions, sulfate minerals are precipitated from water or have extensively interacted with water at some time in their history. Because of this nearly ubiquitous association with water, the kinetics of isotopic exchange reactions among dissolved species and solids are fundamental in dictating the isotopic composition of sulfate minerals. In general, the heavier isotope of sulfur is enriched in the higher oxidation state, such that under equilibrium conditions, sulfate minerals (e.g. barite, anhydrite) are expected to be enriched in the heavy isotope relative to disulfide minerals (e.g. pyrite, marcasite), which in turn are expected to be enriched relative to monosulfide minerals (e.g. pyrrhotite, sphalerite, galena) ( Sakai 1968 , Bachinski 1969 ). The kinetics of isotopic exchange among minerals with sulfur at the same oxidation state, such as sphalerite, and galena, are such that equilibrium is commonly observed. In contrast, isotopic equilibrium for exchange reactions between minerals of different oxidation states depends on factors such as the pH, time and temperature of reaction, the direction of reaction, fluid composition, and the presence or absence of catalysts ( Ohmoto and Lasaga 1982 ). The kinetics of oxygen isotope exchange between dissolved sulfate and water are extremely sluggish. Extrapolation of the high-temperature (100 to 300°C) isotopic exchange kinetic data of Chiba and Sakai (1985) to ambient temperatures suggests that it would take several billions of years for dissolved sulfate and seawater to reach oxygen isotopic equilibrium. In contrast, the residence time of sulfate in the oceans is only 7.9 million years ( Holland 1978 ). However, at higher temperatures (>200°C), oxygen isotopic exchange is sufficiently rapid to permit application of sulfate isotope geothermometry to geothermal systems and hydrothermal mineral deposits. In general, equilibrium prevails at low pH and high temperatures, whereas kinetic factors preclude equilibrium at low temperatures even at low pH. Thus, the sluggish kinetics of sulfur and oxygen isotope exchange reaction at low temperatures impair the use of these isotopes to understand the conditions of formation of sulfate minerals in these environments. However, because of these slow kinetics, the oxygen and sulfur isotopic compositions of sulfate minerals may preserve a record of the sources and processes that initially produced the dissolved sulfate, because the isotope ratios may not re-equilibrate during fluid transport and mineral precipitation. The first part of this chapter is designed to provide the reader with a basic understanding of the principles that form the foundations of stable isotope geochemistry. Next, an overview of analytical methods used to determine the stable isotope composition of sulfate minerals is presented. This overview is followed by a discussion of geochemical processes that determine the stable isotope characteristics of sulfate minerals and related compounds. The chapter then concludes with an examination of the stable isotope systematics of sulfate minerals in a variety of geochemical environments.

Reviews in Mineralogy and Geochemistry↗

USGS1976

Feeding ecology of breeding gadwalls on saline wetlands

The feeding ecology of breeding gadwalls ( Anas strepera ) from saline wetlands in North Dakota was examined in relation to sex, pair mates, reproductive status, food availability, and wetland type during the spring and summer of 1971 and 1972. Esophagi of males and females contained 40.4 and 48.2 percent animal food, respectively, between 17 April and 25 August. Animal foods consumed by paired females varied with reproductive condition and were independent of their mates. Invertebrates increased from 47.7 i?? 17.4 percent in the diet during prelaying to 72.0 i?? 18.4 percent during laying and declined to 46.3 i?? 30.0 percent during postlaying. Aquatic insects dominated the diet during egg-laying and were selected disproportionately relative to their availability. Esophageal contents indicated that diversity of plant and animal foods in the diet varied inversely with specific conductance. Major factors influencing food selection of the breeding birds are discussed as interactions among their physiological status, their anatomical and behavioral characteristics, and the abundance and behavior of food organisms as influenced by chemical and physical features of the environment. The data suggested that these interrelated ecological factors act simultaneously to control the phenology of events and determine the foods utilized.

North Dakota↗

USGS2024

Factors affecting the density of Metabetaeus lohena (Decapoda: Alpheidae) at a high-density anchialine pool environment on the Kona Coast of the Island of Hawai‘i

Caridean shrimps (Caridea) are the dominant macroinvertebrates in most anchialine ecosystems. Hawaiian anchialine ecosystems, primarily composed of shallow surface pools connected to the ocean via hypogeal networks of cracks, tubes, and other voids, support 10 caridean shrimp species, including two federally listed as endangered. Little is known about most of these species. The objective of this study was to identify factors that affect the abundance and distribution of Metabetaeus lohena (Alpheidae), an uncommon species found across the Hawaiian Archipelago, at Kaloko-Honokōhau National Historical Park, Island of Hawai‘i. This park supports the highest concentration of anchialine pools in the State of Hawai‘i and is critical to protecting this threatened ecosystem. During 2017, we measured the density of M. lohena during nighttime surveys, as well as a variety of other biological, physical, and chemical parameters, in 130 pools. Metabetaeus lohena occupied 71.5% of the pools surveyed, with a mean density of 7.32 individuals/m 2 (95% CI = 5.14–9.49). Invasive fish and the endemic shrimp Halocaridina rubra (Atyidae) had the strongest effects on M. lohena density, with negative and positive relations, respectively. In the first estimate of M. lohena density at this scale, our data indicate that Kaloko-Honokōhau supports about 11,480 shrimp (95% CI = 8,054–14,906) in the pools surveyed. Furthermore, our models predict that this park could support an additional 1,695 individuals (95% CI = 955–3,008) for a population of about 13,175 shrimp if fish were removed from 19 pools in which M. lohena are absent.

Hawaii↗

USGS2020

Volcanological applications of unoccupied aircraft systems (UAS): Developments, strategies, and future challenges

Unoccupied aircraft systems (UAS) are developing into fundamental tools for tackling the grand challenges in volcanology; here, we review the systems used and their diverse applications. UAS can typically provide image and topographic data at two orders of magnitude better spatial resolution than space-based remote sensing, and close-range observations at temporal resolutions down to those of video frame rates. Responsive deployments facilitate dense time-series measurements, unique opportunities for geophysical surveys, sample collection from hostile environments such as volcanic plumes and crater lakes, and emergency deployment of ground-based sensors (and robots) into hazardous regions. UAS have already been used to support hazard management and decision-makers during eruptive crises. As technologies advance, increased system capabilities, autonomy and availability, supported by more diverse and lighter-weight sensors, will offer unparalleled potential for hazard monitoring. UAS are expected to provide opportunities for pivotal advances in our understanding of complex physical and chemical volcanic processes.

Volcanica↗

USGS1970

Remote Sensor Application Studies Progress Report, July L, 1968 to June 30, 1969. Controlled Field Experiments

Field Sites have been selected for controlled experiments to analyze physical and chemical parameters affecting the response of electromagnetic radiation to geological materials. Considerations in the selection of the sites are the availability of good exposures of nearly monomineralic rocks, level of geologic understanding, and ease of access. Seven sites, where work is underway or planned, contain extensive outcrops of the following rocks: stanstone, limestone, dolomite, and gypsum. Field measurement of quartz have been conducted at four sites.

Report↗

USGS1962

Molar volumes and densities of minerals

These tables present critically chosen "best values" for the density and molar volume of selected mineral compounds. No attempt was made to be all-inclusive; rather we have tried to present data for chemically and physically well-defined phases for which the molar volume and/or density was knovvn to the order of 0. 2 percent.

Trace Elements Investigations↗

USGS1998

Radiogenic isotopes and the Eastern Mineral Resources Program of the U.S. Geological Survey

Radiogenic isotope geology relies on a small group of naturally occurring but unstable elements that naturally produce energy and disintegrate or decay to more stable atoms of different elements. Because this phenomenon occurs at a known rate, is unaffected by most physical and chemical processes, and takes place over periods of time comparable to the age of the Earth, these elements can be used in radiometric dating or geochronology.

Information Handout↗

USGS1963

Fluvial sediments a summary of source, transportation, deposition, and measurement of sediment discharge

This paper presents a broad but undetailed picture of fluvial sediments in streams, reservoirs, and lakes and includes a discussion of the processes involved in the movement of sediment by flowing water. Sediment is fragmental material that originates from the chemical or physical disintegration of rocks. The disintegration products may have many different shapes and may range in size from large boulders to colloidal particles. In general, they retain about the same mineral composition as the parent rocks. Rock fragments become fluvial sediment when they are entrained in a stream of water. The entrainment may occur as sheet erosion from land surfaces, particularly for the fine particles, or as channel erosion after the surface runoff has accumulated in streams. Fluvial sediments move in streams as bedload (particles moving within a few particle diameters of the streambed) or as suspended sediment in the turbulent flow. The discharge of bedload varies with several factors, which may include particle size and a type of effective shear on the surface of the streambed. The discharge of suspended sediment depends partly on concentration of moving sediment near the streambed and hence on discharge of bedload. However, the concentration of fine sediment near the streambed varies widely, even for equal flows, and, therefore, the discharge of fine sediment normally cannot be computed theoretically. The discharge of suspended sediment also depends on velocity, turbulence, depth of flow, and fall velocity of the particles. In general, the coarse sediment transported by a stream moves intermittently and is discharged at a rate that depends on properties of the flow and of the sediment. If an ample supply of coarse sediment is available at the surface of the streambed, the discharge of the coarse sediment, such as sand, can be roughly computed from properties of the available sediment and of the flow. On the other hand, much of the fine sediment in a stream usually moves nearly continuously at about the velocity of the flow, and even low flows can transport large amounts of fine sediment. Hence, the discharge of fine sediments, being largely dependent on the availability of fine sediment upstream rather than on the properties of the sediment and of the flow at a cross section, can seldom be computed from properties, other than concentrations based directly on samples, that can be observed at the cross section. Sediment particles continually change their positions in the flow; some fall to the streambed, and others are removed from the bed. Sediment deposits form locally or over large areas if the volume rate at which particles settle to the bed exceeds the volume rate at which particles are removed from the bed. In general, large particles are deposited more readily than small particles, whether the point of deposition is behind a rock, on a flood plain, within a stream channel, or at the entrance to a reservoir, a lake, or the ocean. Most samplers used for sediment observations collect a water-sediment mixture from the water surface to within a few tenths of a foot of the streambed. They thus sample most of the suspended sediment, especially if the flow is deep or if the sediment is mostly fine; but they exclude the bedload and some of the suspended sediment in a layer near the streambed where the suspended-sediment concentrations are highest. Measured sediment discharges are usually based on concentrations that are averages of several individual sediment samples for a cross section. If enough average concentrations for a cross section have been determined, the measured sediment discharge can be computed by interpolating sediment concentrations between sampling times. If only occasional samples were collected, an average relation between sediment discharge and flow can be used with a flow-duration curve to compute roughly the average or the total sediment discharges for any periods of time for which the flow-duration c

Bulletin↗

USGS2003

Chapter E: History and Overview of the U.S. Diatomite Mining Industry, with Emphasis on the Western United States

The United States is the largest producer and consumer of diatomite in the world. In 2001, the United States produced about a third of the estimated global production of 1.95 million metric tons (Mt) of diatomite (Dolley, 2003). In any given year, the United States accounts for at least 50 percent of all the diatomite exported in the world (Roskill, 1994). Seven diatomite companies operating in the United States produce diatomite in various grades for a range of applications, including filtration, absorbents, fillers, insulation, and cement manufacture. Economic deposits of diatomite within the United States depend on variations in the physical and chemical properties between and within deposits, potential end uses, and proximity to suitable markets. On the basis of historical production figures, estimated U.S. diatomite-production capacity is currently about 800,000 metric tons per year (t/yr).

Bulletin↗

USGS1953

Fluorspar deposits of the Eagle Mountains, Trans-Pecos Texas

The Eagle Mountains are in the southeastern part of Hudspeth County, Tex., about 17 miles southwest of Van Horn and 100 miles southeast of El Paso, Tex. The fluorspar deposits are in the northern and northeastern parts of the mountains, except for the Rocky Ridge deposits, which are near the center of the mountainous mass. A good all-weather road leads south from Allamoore on U. S. Highway 80 to the mine and mill at Spar Valley. With the exception of the Rocky Ridge deposits, all deposits can be reached by ranch roads from the main Spar Valley road. Fluorspar was first found in the Eagle Mountains in 1919, but no development was undertaken until 1942. Since then, mining has been done at Eagle Spring and at the various deposits in Spar Valley. Many other deposits have been found in the area. About 12,000 tons of fluorspar had been shipped previous to January 1949, most of which came from the North ore body in Spar Valley. A mill was built near the deposits In 1945. With the exception of the Eagle Spring and Tank Canyon deposits, both of minor importance, the fluorspar deposits as of 1950 are all controlled by Texas Fluorspar Mines, Inc., of Van Horn, Tex. Cretaceous sedimentary rocks, which crop out on the flanks of the mountains, are overlain by a thick series of Tertiary volcanics that make up much of the central part of the mountains. Low on the northeast side, the Cretaceous rocks are underlain by Permian (?) limestones and the pre-Cambrian Carrizo Mountain schist. The Cretaceous sedimentary rocks range from the Yucca formation of Early Cretaceous (lower Trinity) age through the Eagle Ford formation of Late Cretaceous age. The rocks on the northeast side of the mountains dip southwest, and those on the southwest and west sides dip east-northeast and northeast. The axis of the large syncline thus formed roughly parallels the axis of the range. The igneous rocks occur within the trough of the syncline. Both intrusive and extrusive rocks are present. The extrusive rocks have been separated into three divisions : the lower rhyolitic series, trachyte porphyry, and the upper rhyolitic series. Both rhyolitic series consist of flows, flow breccias, volcanic breccias, and tuffaceous sediments, all predominantly of rhyolitic composition, although tending toward andesite locally. These volcanics have been intruded by a small stock of syenite, named in this report the Eagle Peak syenite, which crops out in the central, higher parts of the mountains. Rhyolite sills have invaded the sedimentary rocks near the margin of the volcanics, and diabase and late rhyolite dikes have intruded both sedimentary and volcanic rocks. Faults are common in the area, and six series of faults have been recognized. Thrusting from the southwest occurred both before and after the igenous activity and the subsequent downwarping of the central part of the mountains. The early thrust faults were followed by high-angle normal and reverse faults that trend northeastward and cut the volcanics. Later normal and reverse faults trending northwestward, and faults with large horizontal displacements trending roughly eastward, also are present, in addition to very late faults trending in a general northwesterly direction. Fluorspar occurs in the Eagle Mountains both as replacement deposits in limestone and as fissure veins, chiefly in rhyolite. Chief among the fissure veins are those occurring along the Rhyolite fault, the Wind Canyon fault, the vein at Shaft 4, and the veins on Fox claims 9 and 10. The most important replacement deposits are in the Rocky Ridge area and in Spar Valley. • At the North ore body in Spar Valley, the fluorine-bearing solutions replaced a series of sandy limestones in the upper beds of the lower part of the Finlay formation. Structural conditions limited the extent of the replaceable beds and consequently of the fluorspar mineralization. The fluorine-bearing solutions represent a very late stage of the igneous activity of the area. The large east-trending faults with their wide zones of gouge and breccia, typified by the Rhyolite and Wind Canyon faults, acted as the major channels for the solutions in their upward course. From these faults, the solutions spread outward into other faults and fractures, chiefly those with a northeasterly trend, and into the adjoining limestones. The physical and chemical nature of the surrounding rock, as well as structural conditions affecting the presence of openings in the rock, were the major controlling factors governing the size, extent, and position of the fluorspar deposits.

Texas↗