SEARCH · Search USGS

Results for “Polar Record”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5Linked to original sources

USGS1991

Planktic foraminifer census data from Northwind Ridge Core 5, Arctic Ocean

The U.S. Geological Survey recovered 9 piston cores from the Northwind Ridge in the Canada Basin of the Arctic Ocean from a cruise of the USCGC Polar Star during 1988. Preliminary analysis of the cores suggests sediments deposited on Northwind Ridge preserve a detailed record of glacial and interglacial cycles for the last few hundred-thousand to one million years. This report includes quantitative data on foraminifers and selected sediment size-fraction data in samples from Northwind Ridge core PI-88AR P5.

Open-File Report↗

USGS2020

Strain-estimated ground motions associated with recent earthquakes in California

Peak ground velocity (PGV) is a commonly used parameter in earthquake ground‐motion models (GMMs) and hazard analyses, because it is closely related to structural damage and felt ground shaking, and is typically measured on broadband seismometers. Here, we demonstrate that strainmeters, which directly measure in situ strain in the bulk rock, can easily be related to ground velocity by a factor of bulk shear‐wave velocity and, thus, can be used to measure strain‐estimated PGV. We demonstrate the parity of velocity to strain utilizing data from borehole strainmeters deployed along the plate boundaries of the west coast of the United States for nine recent M "> M M 4.4–7.1 earthquakes in California, including the largest two events of the July 2019 Ridgecrest earthquake sequence. PGVs derived from maximum horizontal shear strains fall within the range of seismic‐estimated values recorded at the same distances. We compare the strain‐estimated data with GMMs based on seismic PGVs and find consistency in residual polarity (positive vs. negative; the sign of the difference between observed and modeled data) for certain earthquake–station paths, where some paths indicate an overestimation and others indicate an underestimation of strain‐derived PGVs, as compared with the GMMs. We surmise that this may be indicative of over or underestimation of shear‐wave velocity along those paths, as compared with the average velocity used to derive PGV from strain measurements, or indicative of repeatable site and path effects that are not accounted for in our analyses. This direct comparison of strain with velocity can highlight physical path effects, as well as improve the density and capability of ground‐motion recordings.

California↗

USGS2013

Differential preservation in the geologic record of intraoceanic arc sedimentary and tectonic processes

Records of ancient intraoceanic arc activity, now preserved in continental suture zones, are commonly used to reconstruct paleogeography and plate motion, and to understand how continental crust is formed, recycled, and maintained through time. However, interpreting tectonic and sedimentary records from ancient terranes after arc–continent collision is complicated by preferential preservation of evidence for some arc processes and loss of evidence for others. In this synthesis we examine what is lost, and what is preserved, in the translation from modern processes to the ancient record of intraoceanic arcs. Composition of accreted arc terranes differs as a function of arc–continent collision geometry. ‘Forward-facing’ collision can accrete an oceanic arc on to either a passive or an active continental margin, with the arc facing the continent and colliding trench- and forearc-side first. In a ‘backward-facing’ collision, involving two subduction zones with similar polarity, the arc collides backarc-first with an active continental margin. The preservation of evidence for contemporary sedimentary and tectonic arc processes in the geologic record depends greatly on how well the various parts of the arc survive collision and orogeny in each case. Preservation of arc terranes likely is biased towards those that were in a state of tectonic accretion for tens of millions of years before collision, rather than tectonic erosion. The prevalence of tectonic erosion in modern intraoceanic arcs implies that valuable records of arc processes are commonly destroyed even before the arc collides with a continent. Arc systems are most likely to undergo tectonic accretion shortly before forward-facing collision with a continent, and thus most forearc and accretionary-prism material in ancient arc terranes likely is temporally biased toward the final stages of arc activity, when sediment flux to the trench was greatest and tectonic accretion prevailed. Collision geometry and tectonic erosion vs. accretion are important controls on the ultimate survival of material from the trench, forearc, arc massif, intra-arc basins, and backarc basins, and thus on how well an ancient arc terrane preserves evidence for tectonic processes such as subduction of aseismic ridges and seamounts, oblique plate convergence, and arc rifting. Forward-facing collision involves substantial recycling, melting, and fractionation of continent-derived material during and after collision, and so produces melts rich in silica and incompatible trace elements. As a result, forward-facing collision can drive the composition of accreted arc crust toward that of average continental crust.

Earth-Science Reviews↗

USGS2024

SKHASH: A python package for computing earthquake focal mechanisms

We introduce a Python package for computing focal mechanism solutions. This algorithm, which we refer to as SKHASH, is largely based on the HASH algorithm originally written in Fortran over 20 yr ago. HASH innovated the use of suites of solutions, spanning the expected errors in polarities and takeoff angles, to estimate focal mechanism uncertainty. SKHASH benefits from new features with flexible input formats and allows users to take advantage of recent advances in constraining focal mechanisms for small magnitude or poorly recorded earthquakes. The 3D locations of earthquakes and the velocity models used are varied when finding acceptable solutions. As a result, source–receiver azimuths are reflective of errors from the earthquake locations and velocity models, in addition to the takeoff angles. Users can consider weighted P ‐wave first‐motion polarities derived from traditional or machine‐learning picks, cross‐correlation consensus, and/or imputation techniques using SKHASH. Focal mechanism solutions can also be further constrained using traditional, machine learning, and/or cross‐correlation consensus S / P amplitude ratios. With improved reporting of individual and collective P polarity and S / P amplitude misfits, users can better evaluate the success of the solutions and the quality of the measurements. The reporting also makes it easier to identify potential issues with metadata, including incorrectly reported station polarity reversals. In addition, by leveraging vectorized operations, taking advantage of an efficient backend Python C Application Programming Interface, and the use of a parallel environment, the Python SKHASH routine may compute mechanisms quicker than the HASH routine.

Seismological Research Letters↗

USGS2021

Wastewater disposal has not significantly altered the regional stress state in southern Kansas

Wastewater disposal is primarily responsible for the increased seismicity rate since ~2013 in southern Kansas. Previous work that used shear wave splitting (SWS) in southern Kansas interpreted a ~90º temporal rotation in the fast polarization direction and attributed it to increased pore pressures resulting from fluid injection. However, this interpreted rotation coincided with a change in the stations used to make the SWS measurements. We investigate the temporal variability of fast azimuths in southern Kansas by making SWS measurements on earthquake families with similar source-receiver paths recorded on a stable local seismic network. We select high-quality SWS measurements by investigating the stability of results across 65 different frequency bands between 0.5-15 Hz. We find that the fast polarization direction in southern Kansas is relatively constant with an average ENE (~N79ºE) orientation between 2014-2017. Our fast polarization measurements are primarily a reflection of the maximum principal horizontal stress direction (SHmax). We observe a slight spatial change in SHmax to the NE (~N55°E) near the Nemaha Ridge in Oklahoma. However, we do not observe any significant temporal rotation of SHmax or variation in delay time (i.e., crack density) in southern Kansas, contrary to the earlier study. The previously interpreted ~90º rotation may either be a reflection of a very local stress change or a misinterpretation of SWS results potentially due to the use of inconsistent source-receiver paths. Our SWS measurements cover the period of peak wastewater disposal and seismicity rates and suggest an absence of significant temporal rotations in the local anisotropy and stress orientations associated with wastewater disposal.

Kansas↗

USGS2005

Strong ground motion in the Taipei basin from the 1999 Chi-Chi, Taiwan, earthquake

The Taipei basin, located in northwest Taiwan about 160 km from the epicenter of the Chi-Chi earthquake, is a shallow, triangular-shaped basin filled with low-velocity fluvial deposits. There is a strong velocity contrast across the basement interface of about 600 m/sec at a depth of about 600-700 m in the deeper section of the basin, suggesting that ground motion should be amplified at sites in the basin. In this article, the ground-motion recordings are analyzed to determine the effect of the basin both in terms of amplifications expected from a 1D model of the sediments in the basin and in terms of the 3D structure of the basin. Residuals determined for peak acceleration from attenuation curves are more positive (amplified) in the basin (average of 5.3 cm/ sec2 compared to - 24.2 cm/sec2 for those stations outside the basin and between 75 and 110 km from the surface projection of the faulted area, a 40% increase in peak ground acceleration). Residuals for peak velocity are also significantly more positive at stations in the basin (31.8 cm/sec compared to 20.0 cm/sec out). The correlation of peak motion with depth to basement, while minor in peak acceleration, is stronger in the peak velocities. Record sections of ground motion from stations in and around the Taipei basin show that the largest long-period arrival, which is coherent across the region, is strongest on the vertical component and has a period of about 10-12 sec. This phase appears to be a Rayleigh wave, probably associated with rupture at the north end of the Chelungpu fault. Records of strong motion from stations in and near the basin have an additional, higher frequency signal: nearest the deepest point in the basin, the signal is characterized by frequencies of about 0.3 - 0.4 Hz. These frequencies are close to simple predictions using horizontal layers and the velocity structure of the basin. Polarizations of the S wave are mostly coherent across the array, although there are significant differences along the northwest edge that may indicate large strains across that edge of the basin. The length of each record after the main S wave are all longer at basin stations compared to those outside. This increase in duration of ground shaking is probably caused by amplification of ground motion at basin stations, although coda Q (0.67 - 1.30 Hz) is slightly larger inside the basin compared to those at local stations outside the basin. Durations correlate with depth to basement. These motions are in the range that can induce damage in buildings and may have contributed to the structural collapse of multistory buildings in the Taipei basin.

Bulletin of the Seismological Society of America↗

USGS2014

Landsat-8: Science and product vision for terrestrial global change research

Landsat 8, a NASA and USGS collaboration, acquires global moderate-resolution measurements of the Earth's terrestrial and polar regions in the visible, near-infrared, short wave, and thermal infrared. Landsat 8 extends the remarkable 40 year Landsat record and has enhanced capabilities including new spectral bands in the blue and cirrus cloud-detection portion of the spectrum, two thermal bands, improved sensor signal-to-noise performance and associated improvements in radiometric resolution, and an improved duty cycle that allows collection of a significantly greater number of images per day. This paper introduces the current (2012–2017) Landsat Science Team's efforts to establish an initial understanding of Landsat 8 capabilities and the steps ahead in support of priorities identified by the team. Preliminary evaluation of Landsat 8 capabilities and identification of new science and applications opportunities are described with respect to calibration and radiometric characterization; surface reflectance; surface albedo; surface temperature, evapotranspiration and drought; agriculture; land cover, condition, disturbance and change; fresh and coastal water; and snow and ice. Insights into the development of derived ‘higher-level’ Landsat products are provided in recognition of the growing need for consistently processed, moderate spatial resolution, large area, long-term terrestrial data records for resource management and for climate and global change studies. The paper concludes with future prospects, emphasizing the opportunities for land imaging constellations by combining Landsat data with data collected from other international sensing systems, and consideration of successor Landsat mission requirements.

Remote Sensing of Environment↗

USGS2009

Magnetostratigraphic correlations of Permian-Triassic marine-to-terrestrial sections from China

We have studied three Permian–Triassic (PT) localities from China as part of a combined magnetostratigraphic, 40 Ar/ 39 Ar and U–Pb radioisotopic, and biostratigraphic study aimed at resolving the temporal relations between terrestrial and marine records across the Permo-Triassic boundary, as well as the rate of the biotic recovery in the Early Triassic. The studied sections from Shangsi (Sichuan Province), Langdai (Guihzou Province), and the Junggar basin (Xinjiang Province), span marine, paralic, and terrestrial PT environments, respectively. Each of these sections was logged in detail in order to place geochronologic, paleomagnetic, geochemical, conodont and palynologic samples within a common stratigraphic context. Here we present rock-magnetic, paleomagnetic and magnetostratigraphic results from the three localities. At Shangsi, northern Sichuan Province, we sampled three sections spanning Permo-Triassic marine carbonates. Magnetostratigraphic results from the three sections indicate that the composite section contains at least eight polarity chrons and that the PT boundary occurs within a normal polarity chron a short distance above the mass extinction level and a reversed-to-normal (R-N) polarity reversal. Furthermore, the onset of the Illawarra mixed interval lies below the sampled section indicating that the uppermost Permian Changhsingian and at least part of the Wuchiapingian stages postdate the end of the Kiaman Permo-Carboniferous Reversed Superchron. At Langdai, Guizhou Province, we studied magnetostratigraphy of PT paralic mudstone and carbonate sediments in two sections. The composite section spans an R-N polarity sequence. Section-mean directions pass a fold test at the 95% confidence level, and the section-mean poles are close to the mean PT pole for the South China block. Based on biostratigraphic constraints, the R-N transition recorded at Langdai is consistent with that at Shangsi and demonstrates that the PT boundary occurred within a normal polarity chron a short distance above the mass extinction level. In the southern Junggar basin, Xinjiang Province, in northwest China, we determined the magnetostratigraphy of three sections of a terrestrial sequence. Normal and reversed polarity directions are roughly antipodal, and magnetostratigraphies from the three sections are highly consistent. Combined bio- and magneto-stratigraphy used to correlate this sequence to other PT sequences suggests that the previously-proposed biostratigraphic PT boundary in the Junggar sections was most likely misplaced by earlier workers suggesting that further work is necessary to confidently place the PT boundary there.

Journal of Asian Earth Sciences↗

USGS2012

Seismic constraints on the nature of lower crustal reflectors beneath the extending Southern Transition Zone of the Colorado Plateau, Arizona

We determine the reflection polarity and exploit variations in P and S wave reflectivity and P wave amplitude versus offset (AVO) to constrain the origin of lower crustal reflectivity observed on new three-component seismic data recorded across the structural transition of the Colorado Plateau. The near vertical incidence reflection data were collected by Stanford University in 1989 as part of the U.S. Geological Survey Pacific to Arizona Crustal Experiment that traversed the Arizona Transition Zone of the Colorado Plateau. The results of independent waveform modeling methods are consistent with much of the lower crustal reflectivity resulting from thin, high-impedance layers. The reflection polarity of the cleanest lower crustal events is positive, which implies that these reflections result from high-velocity contrasts, and the waveform character indicates that the reflectors are probably layers less than or approximately equal to 200 m thick. The lower crustal events are generally less reflective to incident S waves than to P waves, which agrees with the predicted behavior of high-velocity mafic layering. Analysis of the P wave AVO character of lower crustal reflections demonstrates that the events maintain a constant amplitude with offset, which is most consistent with a mafic-layering model. One exception is a high-amplitude (10 dB above background) event near the base of lower crustal reflectivity which abruptly decreases in amplitude at increasing offsets. The event has a pronounced S wave response, which along with its negative AVO trend is a possible indication of the presence of fluids in the lower crust. The Arizona Transition Zone is an active but weakly extended province, which causes us to discard models of lower crustal layering resulting from shearing because of the high degree of strain required to create such layers. Instead, we favor horizontal basaltic intrusions as the primary origin of high-impedance reflectors based on (1) The fact that most xenoliths in eruptive basalts of the Transition Zone are of mafic igneous composition, (2) indications that a pulse of magmatic activity crossed the Transition Zone in the late Tertiary period, and (3) the high regional heat flow observed in the Transition Zone. The apparent presence of fluids near the base of the reflective zone may indicate a partially molten intrusion. We present a mechanism by which magma can be trapped and be induced to intrude horizontally at rheologic contrasts in extending crust.

Arizona↗

USGS2011

Old ice in rock glaciers may provide long-term climate records

Anyone who spends much time above the treeline has probably seen rock glaciers and paused to wonder about them. Their curious and occasionally spectacular forms (Figure 1) occur in alpine and polar regions throughout the world, yet much remains uncertain about how they develop. A core of ice recently recovered from a rock glacier in the Absaroka Mountains of northwestern Wyoming vividly illustrates several important aspects about rock glaciers. At least some rock glaciers are a form of debris-covered glacier, and original isotopic stratigraphy may be preserved within their ice. Perhaps most interesting of all, the core of some rock glaciers is composed of layered ice that can be drilled and recovered, and some of this ice is exceptionally old.

Eos, Transactions, American Geophysical Union↗

USGS1999

Source processes of industrially-induced earthquakes at the Geysers geothermal area, California

Microearthquake activity at The Geysers geothermal area, California, mirrors the steam production rate, suggesting that the earthquakes are industrially induced. A 15-station network of digital, three-component seismic stations was operated for one month in 1991, and 3,900 earthquakes were recorded. Highly-accurate moment tensors were derived for 30 of the best recorded earthquakes by tracing rays through tomographically derived 3-D VP and VP / VS structures, and inverting P-and S-wave polarities and amplitude ratios. The orientations of the P-and T-axes are very scattered, suggesting that there is no strong, systematic deviatoric stress field in the reservoir, which could explain why the earthquakes are not large. Most of the events had significant non-double-couple (non-DC) components in their source mechanisms with volumetric components up to ???30% of the total moment. Explosive and implosive sources were observed in approximately equal numbers, and must be caused by cavity creation (or expansion) and collapse. It is likely that there is a causal relationship between these processes and fluid reinjection and steam withdrawal. Compensated linear vector dipole (CLVD) components were up to 100% of the deviatoric component. Combinations of opening cracks and shear faults cannot explain all the observations, and rapid fluid flow may also be involved. The pattern of non-DC failure at The Geysers contrasts with that of the Hengill-Grensdalur area in Iceland, a largely unexploited water-dominated field in an extensional stress regime. These differences are poorly understood but may be linked to the contrasting regional stress regimes and the industrial exploitation at The Geysers.

Geophysics↗

USGS2010

Very rapid geomagnetic field change recorded by the partial remagnetization of a lava flow

A new paleomagnetic result from a lava flow with a distinctive, two-part remanence reinforces the controversial hypothesis that geomagnetic change during a polarity reversal can be much faster than normal. The 3.9-m-thick lava (“Flow 20”) is exposed in the Sheep Creek Range (north central Nevada) and was erupted during a reverse-to-normal (R-N) geomagnetic polarity switch at 15.6 Ma. Flow 20 began to acquire a primary thermoremanence while the field was pointing east and down but was soon buried, reheated, and partially-remagnetized in a north-down direction by the 8.2-m-thick flow that succeeded it. A simple conductive cooling calculation shows that the observed remagnetization could not have occurred unless Flow 20 was still warm (about 150°C near its base) when buried and that the 53° change from east-down to north-down field occurred at an average rate of approximately 1°/week, several orders of magnitude faster than typical of secular variation.

Nevada↗

USGS2024

Arctic Alaska deepwater organic carbon burial and environmental changes during the late Albian–early Campanian (103–82 Ma)

The middle Cretaceous greenhouse period experienced profound environmental change including episodes of enhanced global burial of organic carbon marked by carbon isotopic excursions (CIEs). However, the role and response of polar regions like the newly formed, partially enclosed Arctic Ocean Basin during middle Cretaceous carbon burial remains enigmatic. We present the first Arctic deepwater CIE record that characterizes conditions offshore of the Alaska margin north of 75°N paleolatitude. Organic carbon isotopes (δ 13 C org ) and 103–82 Ma ash zircon U-Pb dates from the distal Hue Shale record multiple Albian–Campanian CIEs during slow ∼3–15 m/Myr sediment accumulation rates. Average total organic carbon (TOC) increased substantially during large 2–3 ‰ CIEs of the ∼101 Ma Albian-Cenomanian boundary event (from 7 to 18 % TOC) and ∼94 Ma Cenomanian-Turonian boundary event (5 to 10 % TOC). Turonian TOC remained elevated (8–13 %) during high global sea levels and temperatures of the Cretaceous Thermal Maximum, followed by an increase from 7 to 11 % TOC during the ∼90 Ma late Turonian event 1.5 ‰ CIE. Average TOC subsequently decreased in the Coniacian–Campanian, but relative maxima occurred during subtle 0.5–1 ‰ CIEs interpreted as the ∼87 Ma late Coniacian event (increase from 4 to 7 % TOC), ∼85 Ma Horseshoe Bay event (3.5 to 4.5 % TOC), and ∼84 Ma Santonian-Campanian boundary event (3.5 to 5 % TOC). Increases in hydrogen index and productivity proxies (P, Ba, Nd) that accompanied each CIE episode with enhanced TOC suggest a strong link between marine productivity and organic carbon burial at short-term CIE timescales. However, long-term (>5–8 Myr) changes in trace metal redox (Mo, Fe, V) and salinity (B/Ga) proxies suggest shifts in prevailing environmental conditions at timescales longer than the CIEs. Late Albian–middle Turonian marine salinity occurred during euxinic (103–98 Ma) and suboxic (98–90 Ma) conditions with deposition interpreted to have occurred within and beneath an oxygen minimum zone, respectively. In contrast, late Turonian–early Campanian (90–82 Ma) freshening and restricted euxinic basin conditions may signal the start of widespread restriction known to characterize the Paleogene Arctic. Overall, these results highlight that middle Cretaceous Arctic deepwater remained a productive marine carbon sink coupled to the global carbon cycle despite evolving Arctic greenhouse conditions.

Alaska↗

USGS2015

Validation of mercury tip-switch and accelerometer activity sensors for identifying resting and active behavior in bears

Activity sensors are often included in wildlife transmitters and can provide information on the behavior and activity patterns of animals remotely. However, interpreting activity-sensor data relative to animal behavior can be difficult if animals cannot be continuously observed. In this study, we examined the performance of a mercury tip-switch and a tri-axial accelerometer housed in collars to determine whether sensor data can be accurately classified as resting and active behaviors and whether data are comparable for the 2 sensor types. Five captive bears (3 polar [ Ursus maritimus ] and 2 brown [ U. arctos horribilis ]) were fitted with a collar specially designed to internally house the sensors. The bears’ behaviors were recorded, classified, and then compared with sensor readings. A separate tri-axial accelerometer that sampled continuously at a higher frequency and provided raw acceleration values from 3 axes was also mounted on the collar to compare with the lower resolution sensors. Both accelerometers more accurately identified resting and active behaviors at time intervals ranging from 1 minute to 1 hour (≥91.1% accuracy) compared with the mercury tip-switch (range = 75.5–86.3%). However, mercury tip-switch accuracy improved when sampled at longer intervals (e.g., 30–60 min). Data from the lower resolution accelerometer, but not the mercury tip-switch, accurately predicted the percentage of time spent resting during an hour. Although the number of bears available for this study was small, our results suggest that these activity sensors can remotely identify resting versus active behaviors across most time intervals. We recommend that investigators consider both study objectives and the variation in accuracy of classifying resting and active behaviors reported here when determining sampling interval.

Ursus↗

USGS1997

Lower to middle Eocene sequences of the New Jersey coastal plain and their significance for global climate change

Boreholes from Island Beach, Allaire, Atlantic City, and Mays Landing, NJ provide an excellent chronology of lower to middle Eocene passive margin sequences and allow analysis of long-term sea-level changes and sedimentation patterns. These New Jersey sequences are tied directly to the geomagnetic polarity time scale through magnetostratigraphy. Integrated stratigraphy (including magnetostratigraphy, lithostratigraphy, plankton biostratigraphy, and benthic foraminiferal biofacies studies) reveals that these sections contain a relatively continuous record of lowermost Eocene to middle Eocene deposition interrupted by short hiatuses. A sequence boundary at the base of the section spans the Paleocene/Eocene boundary, representing a hiatus from 55.8 to 54.7 Ma. A second sequence boundary is associated with a hiatus from 54.0 to 53.4 Ma. A third sequence boundary is associated with a hiatus from 52.9 to 52.3 Ma. Two major unconformities occur near the lower/middle Eocene boundary at all three boreholes. The first represents a hiatus between 50.9 and ~50.5 to 49.9 Ma; the second, between ~49.6 and 48.6 Ma. Early Eocene water depths inferred from benthic foraminiferal biofacies analysis varied from 150 to 200 m and reached their maximum depth between 53.4 and 53.2 Ma. In the middle Eocene, the sedimentation record is less continuous with hiatuses from 48.3 to 47.9 Ma, 46.9 to 44.5 Ma, and 43.4 to ~41.2 Ma. A major lithofacies change from carbonate dominated to siliciclastic dominated occurred by 41.2 Ma. Of the 14 sequences inferred by Exxon for the early to middle Eocene, nine are resolvable on the New Jersey Margin and the remaining five appear to be combined with others. Thus the New Jersey record is consistent with the Exxon record for the early to middle Eocene, although the New Jersey record is better dated. Comparison of the record of sedimentation with the global δ 18 O record shows interesting parallels. It is unlikely that early Eocene sequence boundaries are the result of glacioeustasy because hiatuses from the New Jersey Coastal Plain in this interval do not match increases in the δ 18 O record. In the late middle Eocene, concomitant increases in the planktonic and benthic δ 18 O records coincide with the timing of hiatuses on the New Jersey Coastal Plain. Increases in the δ 18 O records between 43 and 41 Ma coincide with a New Jersey hiatus and a corresponding change in sedimentation type from carbonate dominated to siliciclastic dominated. We conclude that these represent evidence of the first Antarctic ice cap and the beginning of the “Icehouse” world.

New Jersey↗

USGS2007

New vitrinite reflectance data for the Bighorn Basin, north-central Wyoming and south-central Montana

The Bighorn Basin is a large Laramide (Late Cretaceous through Eocene) structural and sedimentary basin that encompasses about 10,400 mi2 in north-central Wyoming and south-central Montana (fig. 1). Important conventional oil and gas resources have been discovered and produced from reservoirs ranging in age from Cambrian through Tertiary (Fox and Dolton, 1989, 1996a, b; De Bruin, 1993). In addition, a potential unconventional basin-centered gas accumulation may be present in Cretaceous reservoirs (Johnson and Finn, 1998; Johnson and others, 1999). The purpose of this report is to present new vitrinite reflectance data to be used in support of the U.S Geological Survey’s assessment of undiscovered oil and gas resources of the Bighorn Basin. These new data supplement previously published data by Nuccio and Finn (1998), and Yin (1997), and lead to a better understanding and characterization of the thermal maturation and burial history of potential source rocks. Eighty-nine samples of Cretaceous and Tertiary strata (fig. 2) were collected and analyzed—15 samples were from outcrops around the margins of the basin and 74 samples were well cuttings (fig. 1). Forty-one of the samples were shale, two were carbonaceous shale, and the remainder from coal. All samples were analyzed by vitrinite reflectance to determine levels of thermal maturation. Preparation of samples for reflectance analysis required (1) crushing the larger pieces into 0.25-to 1-mm pieces, (2) casting the pieces with epoxy in pre-cut and drilled plugs, and (3) curing the samples overnight. Subsequently, a four-step grinding and polishing process was implemented that included sanding with progressively finer sandpaper (60 and 600 grit) followed with a two-step polishing process (0.3 and 0.05 micron). Vitrinite reflectance measurements were determined at 500 X magnification using plane-polarized incident white light and a 546-nm monochromatic filter in immersion oil. For samples containing sufficiently high quality vitrinite, at least 25 measurements were recorded. For samples of poorer quality, either due to a poor polish or to the presence of mineral or other inorganic material, fewer measurements were recorded. Analytical results are given in tables 1 and 2.

Open-File Report↗

USGS2005

Tropical to mid-latitude snow and ice accumulation, flow and glaciation on Mars

Images from the Mars Express HRSC (High-Resolution Stereo Camera) of debris aprons at the base of massifs in eastern Hellas reveal numerous concentrically ridged lobate and pitted features and related evidence of extremely ice-rich glacier-like viscous flow and sublimation. Together with new evidence for recent ice-rich rock glaciers at the base of the Olympus Mons scarp superposed on larger Late Amazonian debris-covered piedmont glaciers, we interpret these deposits as evidence for geologically recent and recurring glacial activity in tropical and mid-latitude regions of Mars during periods of increased spin-axis obliquity when polar ice was mobilized and redeposited in microenvironments at lower latitudes. The data indicate that abundant residual ice probably remains in these deposits and that these records of geologically recent climate changes are accessible to future automated and human surface exploration.

Nature↗

USGS2025

A wavier polar jet stream contributed to the mid-20th century winter warming hole in the United States

Winter waves in the polar jet stream are associated with extreme cold outbreaks and can modulate longer-term winter temperature trends in the mid-latitudes. Recent research has highlighted a positive trend in jet stream waviness from 1990 to 2010, with a hypothesized connection to Arctic amplification of anthropogenic warming. However, an increase in jet stream waviness has also been hypothesized to contribute to the winter “warming hole” (WH) in eastern North America, a cooling phenomenon from 1958–1988, beginning several decades prior to the recent waviness trend. These potentially conflicting hypotheses highlight the uncertainty of long-term jet stream waviness variability prior to the satellite era (1979–present). Here we develop a new record of wintertime jet stream waviness spanning 1901–2023 based on self-organizing maps and nine different temperature and reanalysis data sets with the dual purpose of (a) understanding the historical variability of polar jet stream waviness in the eastern United States, and (b) quantifying the impact of jet stream waviness on WH-era surface temperatures. Our analysis reveals elevated jet stream waviness in the 1960s–1980s that surpassed modern waviness levels, and we find that jet stream waviness contributed to two-thirds of winter WH cooling beginning in 1958. These results are consistent with a strong connection between temperature trends in the eastern U.S. and jet stream troughing but indicate that additional mechanisms also contributed to the WH. Our analysis further highlights that recent increases in jet stream waviness are well within the range of early to mid-20th century variability, prior to the emergence of Arctic amplification.

AGU Advances↗