Search USGSSearch

SEARCH · Search USGS

Results for “Journal of Separation Science”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5Linked to original sources

Distribution of Pasteurella Trehalosi genotypes isolated from Bighorn Sheep in Waterton-Glacier International Peace Park

We studied the distribution of Pasteurella trehalosi genotypes isolated from oropharyngeal tissues of Rocky Mountain bighorn sheep ( Ovis canadensis canadensis ) in Waterton Lakes National Park, Alberta, Canada and Glacier National Park, Montana, USA. A separate radio-telemetry study indicated the bighorn metapopulation consisted of at least three neighborhoods of multiple ewe and ram social groups, with varying degrees of interchange among them. Genetic analysis using random amplified polymorphic DNA from 25 P. trehalosi isolates revealed three major genotypes. Our predictions were that genetic relatedness would be greatest among organisms collected in the same neighborhood, and that those collected from adjacent neighborhoods would show greater relatedness than those from distant or isolated neighborhoods. Results did not fully support these predictions. Nonetheless, the spatial distribution of P. trehalosi genotypes did vary with the observed neighborhood structure. Two of three genotypes occurred throughout the study area, but the third was found only in Waterton Lakes National Park. Because P. trehalosi is believed to be transmitted only via direct contact between individual sheep, this suggests the north Glacier neighborhood was further partitioned into two subpopulations. Overall, our results show the utility of using DNA from pathogens to elucidate the spatial structure of host populations.

Alberta, Montana

Tectonic framework and Late Cenozoic tectonic history of the northern part of Cyprus: Implications for earthquake hazards and regional tectonics

Located near the triple junction of the African, Arabia, and Eurasian Plate, Cyprus has had an active and complex neotectonic history, which includes devastating historical earthquakes. Investigations into the tectonic framework of the northern part of Cyprus provide important insights into regional tectonism of the Eastern Mediterranean and Middle East. The northern part of Cyprus is divided into two tectono-stratigraphic terranes, the boundary of which is the Ovgos fault zone. In the Middle Miocene, the Ovgos fault zone was a marine platform margin, which separated open-marine platform carbonates from deep-marine turbidites. Transpressive movement along easterly and northeasterly trending structures dominated the Late Miocene; deposition and preservation of Messinian evaporites occurred in grabens at intersections of these trends. N–S compression began in the Early Pliocene and produced contractional tectonism along east–west trends, including major thrusting of allochthonous rocks in the Kyrenia Range. Quaternary deformation has been dominated by strike-slip faults along northeast and northwest trends; movement during the Pleistocene occurred on several of these faults; Holocene movement is documented on one of these faults. A seismic hazard is implied for the Nicosia area because its proximity to the Quaternary faults. Since the Miocene, Cyprus has been continuously uplifted, but the tectonic setting is controversial, as some researchers invoke a subduction zone setting and others ascribe to a regime of strike-slip tectonics. Our neotectonic framework is consistent with a restraining bend model for Cyprus in a regional strike-slip regime.

Journal of Asian Earth Sciences

Environmental presence and persistence of pharmaceuticals: An overview

Emerging contaminants (ECs) in the environment – that is, chemicals with domestic, municipal, industrial, or agricultural sources that are not commonly monitored but may have the potential for adverse environmental effects – is a rapidly growing field of research. The use of “emerging” is not intended to infer that the presence of these compounds in the environment is new. These chemicals have been released into the environment as long as they have been in production or, in the case of hormones and other endogenous compounds, since the rise of animal life. What is emerging is the interest by the scientific and lay communities in the presence of these chemicals in the environment, the analytical capabilities required for detection, and the subtle effects that very small concentrations of these chemicals appear to have on aquatic biota. In December 2006, Environmental Science & Technology devoted an entire special issue (volume 40, number 23) to the topic of ECs, illustrating the increased interest in the subject. Within the EGs, one particular class that has seen a substantial increase in research over the past 10 years is pharmaceuticals and personal-care products (PPCPs). This increased research interest can be demonstrated by several means, including requests for proposals from funding agencies, but the clearest indication of a focused effort to understand the introduction, transformation, and potential health and environmental effects of PPCPs and ECs, in general, is the number of published reports. This increase can be shown by examining six environmental journals that regularly publish PPCP-related papers – Chemosphere , Environmental Science & Technology , Environmental Toxicology and Chemistry , Science of the Total Environment , Water Research , and Water Science and Technology . In 1998 there were 22 papers published on pharmaceuticals, antibiotics, or drugs in these 6 journals; by 2006, this number increased sixfold to 132 papers (Figure 1.1). This growth can be attributed to a number of factors. The presence of pharmaceuticals in surface-water samples from Europe and the United States was documented in several sentinel papers. These ground-breaking works encouraged other scientists to examine the rivers, streams, lakes, and reservoirs in their regions for such chemicals. In addition, the intense public attention paid to news reports on the environmental detections of these chemicals and possible effects of aquatic life has made this issue visible to the wastewater-treatment, drinking-water treatment, and regulatory communities. This has driven the funding bodies associated with these communities to fund studies or request proposals that address the presence, fate, and effects of PPCPs in aquatic systems. The release of the first comprehensive reconnaissance of pharmaceuticals and other wastewater contaminants in the United States provides an example of the intense media interest in this topic. Within 6 days on online publication of this study, 72 newspapers across the United States had published articles describing the results, either locally written or based on international media syndicate reports. There also was substantial concurrent coverage by local and national radio and television outlets, including the Cable News Network, ABC World News Tonight , and National Public Radio. A substantial fraction of these news stories may be attributable to press releases and media briefings prior to publication. However, the interest by television and print journalists in reporting the results of a peer-reviewed journal article to the general public was motivated by the recognition that describing the presence of PPCPs in water supplies would be of interest to the public. To better convey the results of the study published by Koplin et al. to the public, a separate general-interest fact sheet was published to summarize the important points of the study. Because PPCPs are commonly and widely used by individuals, there is likely a preexisting, personal identification with these compounds that does not occur for the wide range of other organic and inorganic contaminants whose presence in the environment has previously been described. This greater public “name recognition” makes itself known through the media to the regulatory and technical community and has prompted interest in sponsoring research that defines the composition and concentrations of PPCPs in potential sources and their fate and effects following relase into the environment. Independent of the drivers that potentially fuel the interest in studies of PPCPs, it is clear that PPCP research has grown beyond surface-water studies to examine issues such as: • Presence in other matrices, such as groundwater, landfill leachates, sediments, and biosolids. • Environmental transport and fate in surface water, groundwater, and soils amended with reclaimed water or biosolids. • PPCP source elucidation, such as wastewater treatment plant (WWTP) effluents, confined animal feeding operations (CAFOs), and aquaculture. • Removal during wastewater and drinking-water treatment. • Effects on aquatic ecosystems, terrestrial ecosystems, and human health. The chapters in this book provide an extensive examination of current environmental pharmaceutical research and are divided into three sections: “Occurrence and Analysis of Pharmaceuticals in the Environment,” “Environment Fate and Transformations of Veterinary Pharmaceuticals,” and “treatment of Pharmaceuticals in Drinking Water and Wastewater.” The purpose of this introductory overview chapter is to outline current (2004-2006) knowledge about the presence and concentration of PPCPs as described in the published literature. Previous reviews should be consulted for discussions on pre-2004 publications. Those reviews will provide the reader with a comprehensive introduction to the topic of PPCPs in the environment. This chapter describes the sources of PPCPs and other organic contaminants often associated with human wastewater into the environment, the range of concentrations present in various environmental compartments, and the potential routes of removal/sequestration. An overview of the sources and fate of veterinary pharmaceuticals will be discussed in Chapter 5, “Fate and Transport of Veterinary Medicines in the Soil Environment.”

Book chapter

Mars Exploration Rover Athena Panoramic Camera (Pancam) investigation

The Panoramic Camera (Pancam) investigation is part of the Athena science payload launched to Mars in 2003 on NASA's twin Mars Exploration Rover (MER) missions. The scientific goals of the Pancam investigation are to assess the high‐resolution morphology, topography, and geologic context of each MER landing site, to obtain color images to constrain the mineralogic, photometric, and physical properties of surface materials, and to determine dust and aerosol opacity and physical properties from direct imaging of the Sun and sky. Pancam also provides mission support measurements for the rovers, including Sun‐finding for rover navigation, hazard identification and digital terrain modeling to help guide long‐term rover traverse decisions, high‐resolution imaging to help guide the selection of in situ sampling targets, and acquisition of education and public outreach products. The Pancam optical, mechanical, and electronics design were optimized to achieve these science and mission support goals. Pancam is a multispectral, stereoscopic, panoramic imaging system consisting of two digital cameras mounted on a mast 1.5 m above the Martian surface. The mast allows Pancam to image the full 360° in azimuth and ±90° in elevation. Each Pancam camera utilizes a 1024 × 1024 active imaging area frame transfer CCD detector array. The Pancam optics have an effective focal length of 43 mm and a focal ratio of f /20, yielding an instantaneous field of view of 0.27 mrad/pixel and a field of view of 16° × 16°. Each rover's two Pancam “eyes” are separated by 30 cm and have a 1° toe‐in to provide adequate stereo parallax. Each eye also includes a small eight position filter wheel to allow surface mineralogic studies, multispectral sky imaging, and direct Sun imaging in the 400–1100 nm wavelength region. Pancam was designed and calibrated to operate within specifications on Mars at temperatures from −55° to +5°C. An onboard calibration target and fiducial marks provide the capability to validate the radiometric and geometric calibration on Mars.

Journal of Geophysical Research E: Planets

Gone with the wind: Eolian erasure of the Mars Rover tracks

The wheel tracks left by the Mars Exploration Rovers Spirit and Opportunity are unique artificial markings on the surface of Mars. The tracks stretch several kilometers across diverse terrain in two widely separated regions of the planet. The initial appearance and characteristics of the tracks were well documented by the science and navigation cameras aboard the vehicles at the time the tracks were formed. Orbital observations by Mars Global Surveyor and Mars Reconnaissance Orbiter document the erasure of the tracks over a period of more than 2 Mars years. Close‐up examinations of track crossings, where the rovers encountered tracks made hundreds of Martian solar days earlier, provide insights into the mechanisms and time scales of eolian alteration on Mars. These observations suggest that fallout of atmospheric dust plays only a minor role in obscuring rover tracks over time. Instead, track erasure is dominated by sediment that is transported by surface winds. Both deposition and erosion act to erase the rover tracks. The length scales for eolian sediment transport are hundreds of meters at least, much larger than the size of the tracks. Gradual processes such as dust devils and sand saltation have minor effects that can nonetheless erase rover tracks over long time periods. However, short‐lived strong wind events associated with seasonal dust storms have much more pronounced effects, significantly altering the tracks on time scales of days. These episodic strong winds tend to occur annually during the perihelion season. The time scale for track erasure is typically only 1 Martian year.

Journal of Geophysical Research E: Planets

Quantification of 15 bile acids in lake charr feces by ultra-high performance liquid chromatography–tandem mass spectrometry

Many fishes are hypothesized to use bile acids (BAs) as chemical cues, yet quantification of BAs in biological samples and the required methods remain limited. Here, we present an UHPLC–MS/MS method for simultaneous, sensitive, and rapid quantification of 15 BAs, including free, taurine, and glycine conjugated BAs, and application of the method to fecal samples from lake charr ( Salvelinus namaycush ). The analytes were separated on a C 18 column with acetonitrile–water (containing 7.5 mM ammonium acetate and 0.1% formic acid) as mobile phase at a flow rate of 0.25 mL/min for 12 min. BAs were monitored with a negative electrospray triple quadrupole mass spectrometer (Xevo TQ-S™). Calibration curves of 15 BAs were linear over the concentration range of 1.00–5,000 ng/mL. Validation revealed that the method was specific, accurate, and precise. The method was applied to quantitative analysis of feces extract of fry lake charr and the food they were eating. The concentrations of analytes CA, TCDCA, TCA, and CDCA were 242.3, 81.2, 60.7, and 36.2 ng/mg, respectively. However, other taurine conjugated BAs, TUDCA, TDCA, and THDCA, were not detected in feces of lake charr. Interestingly, TCA and TCDCA were detected at high concentrations in food pellets, at 71.9 and 38.2 ng/mg, respectively. Application of the method to feces samples from lake charr supported a role of BAs as chemical cues, and will enhance further investigation of BAs as chemical cues in other fish species.

Journal of Chromatography B: Analytical Technologi

Landsat TM and ETM+ thermal band calibration

Landsat-5 has been imaging the Earth since March 1984, and Landsat-7 was added to the series of Landsat instruments in April 1999. The Landsat Project Science Office and the Landsat-7 Image Assessment System have been monitoring the on-board calibration of Landsat-7 since launch. Additionally, two separate university teams have been evaluating the on-board thermal calibration of Landsat-7 through ground-based measurements since launch. Although not monitored as closely over its lifetime, a new effort is currently being made to validate the calibration of Landsat-5. Two university teams are beginning to collect ground truth under Landsat-5, along with using other vicarious calibration methods to go back into the archive to validate the history of the calibration of Landsat-5. This paper considers the calibration efforts for the thermal band, band 6, of both the Landsat-5 and Landsat-7 instruments. Though stable since launch, Landsat-7 had an initial calibration error of about 3 K, and changes were made to correct for this beginning 1 October 2000 for data processed with the National Landsat Archive Production System (NLAPS) and beginning 20 December 2000 for data processed with the Landsat Product Generation System (LPGS). Recent results from Landsat-5 vicarious calibration efforts show an offset of –0.7 K over the lifetime of the instrument. This suggests that historical calibration efforts may have been detecting errors in processing systems rather than changes in the instrument. A correction to the Landsat-5 processing has not yet been implemented but will be in the near future.

Canadian Journal of Remote Sensing

Density of basalt core from Hilo drill hole, Hawaii

Density measurements of 1600 samples of core from 889 to 3097 m depth below sea level in the Hawaii Scientific Drilling Program hole near Hilo, Hawaii show marked differences between the basaltic rock types and help define stratigraphy in the hole. Water-saturated densities of subaerial lava flows (occurring above 1079 m depth) have the broadest range because of the large density variation within a single lava flow. Water-saturated densities commonly range from 2.0 to 3.0 with an average of 2.55 ?? 0.24 g/cc. Dikes and sills range from 2.8 to 3.1 g/cc). Densities of hyaloclastite commonly range from 2.3 to 2.7, with an overall average of about 2.5 g/cc. The low-density of most hyaloclastite is due primarily to palagonitization of abundant glass and presence of secondary minerals in the interstices between fragments. Four principal zones of pillow lava, separated by hyaloclastite, occur in the drill core. The shallowest (1983-2136 m) is paradoxically the densest, averaging 3.01 ?? 0.10 g/cc. The second (2234-2470 m) is decidedly the lightest, averaging 2.67 ?? 0.13 g/cc. The third (2640-2790 m) and fourth (2918-bottom at 3097 m) are high, averaging 2.89 ?? 0.17 and 2.97 ?? 0.08 g/cc, respectively. The first pillow zone includes degassed pillows i.e. lava erupted on land that flowed into the sea. These pillows are poor in vesicles, because the subaerial, one-atmosphere vesicles were compressed when the flow descended to deeper water and higher pressure. The second (low-density, non-degassed) pillow zone is the most vesicle-rich, apparently because it was erupted subaqueously at a shallow depth. The higher densities of the third and fourth zones result from a low vesicularity of only a few percent and an olivine content averaging more than 5% for the third zone and about 10% for the fourth zone. The uppermost hyaloclastite extending about 400 m below the bottom of the subaerial basalt is poorly cemented and absorbs up to 6 wt% of water when immersed. Progressing downward the hyaloclastite absorbs less water and becomes better cemented. This change is apparently due to palagonitization of glass and addition of secondary minerals in the deeper older hyaloclastite, a process favored by the increase of temperature with depth. The cementation is largely complete at 1800 m depth where the temperature attains about 20??C. The zone of freshest, uncemented hyaloclastite represents the weakest rock in the drill hole and is a likely level for tectonic or landslide disruption. ?? 2001 Published by Elsevier Science B.V.

Journal of Volcanology and Geothermal Research

Petrology and age of volcanic-arc rocks from the continental margin of the Bering Sea: Implications for Early Eocene relocation of plate boundaries

Eocene volcanic flow and dike rocks from the Beringian margin have arc characteristics, implying a convergent history for this region during the early Tertiary. The extrusive rocks are basalt, basaltic andesite, andesite, and minor dacite and rhyolite. The intrusive sample is from a quartz diorite dike intruding serpentinized peridotite. Major-element oxide contents, particularly FeO*/MgO versus SiO 2 , identify both tholeiitic and calc-alkalic basalt; more silicic lavas have calc-alkalic affinities. Consistent with volcanic-arc compositions, spidergrams show pronounced Nb–Ta depletion and alkali enrichment relative to light-rare-earth-element ( LREE ) abundance. Chondrite-normalized REE plots show relatively flat patterns, with only slight LREE enrichment for tholeiitic compositions and greater LREE enrichment and lower heavy-rare-earth-element ( HREE ) abundance for calc-alkalic compositions. The samples, particularly those with calc-alkalic compositions, are rich in plagioclase that is strongly zoned; the more silicic samples contain orthopyroxene, clinopyroxene, and primary amphibole. The quartz diorite dike contains iron-rich almandine phenocrysts that appear to be magmatic, suggesting emplacement at great depth near the base of the crust or upper mantle.Chemical and mineralogical compositions are similar to those of modern Aleutian-arc lavas. They also resemble volcanic-arc compositions from western mainland Alaska, although greater chemical diversity and a stronger continental influence are observed in the Alaskan mainland rocks.Early Eocene ages of 54.4–50.2 Ma for the Beringian samples are well constrained by conventional K–Ar ages of nine plagioclase separates and by concordant 40 Ar/ 39 Ar incremental heating and total-fusion experiments. A concordant U–Pb zircon age of 53 Ma for the quartz-diorite dike is in good agreement with the K–Ar data.Plate motion studies of the North Pacific Ocean indicate more northerly directed subduction prior to the Tertiary and a continuous belt of arc-type volcanism extending from Siberia, along the Beringian margin, into mainland Alaska. Around 56 Ma (chron 25–24), subduction changed to a more westerly direction and subduction-related volcanism ceased for most of mainland Alaska. The increasingly oblique angle of convergence should have ended subduction along the Beringian margin as well. However, consistent ages of 54–50 Ma indicate a final pulse in arc-type magmatism during this period of plate adjustment, which may be explained by three different models: (1) The northern and central part of the Beringian margin maintained a higher angle of convergence, allowing a final pulse of arc-type magmatism. (2) The rocks erupted in an early, or proto, Aleutian arc and were rafted against the continental margin along transform faults. (3) The rocks erupted along a leaky transform fault, analogous to calc-alkalic volcanism in the southern California borderland.

Alaska

Interparticle migration of metal cations in stream sediments as a factor in toxics transport

Sorption of metal cations by stream sediments is an important process affecting the movement of released contaminants in the environment. The ability of cations to desorb from one sediment particle and subsequently sorb to another can greatly affect metal transport rates but rates for this process have not been reported. The objective of this study was to determine the rate at which sorbed metals can migrate from contaminated sediment particles to uncontaminated sediment particles as a function of the concentration of the contaminating solution and the duration of the contact with the contaminating solution. Samples of small sediment particles were exposed to solutions containing cobalt, after which they were rinsed and combined with larger uncontaminated sediment particles in the presence of stream water. Initial concentrations of the contaminating solution ranged from 1ng/l to 1000mg/l and exposures to the contaminating solution ranged from 6h to 14 days. The rate of the migration increased with increasing concentrations in the contaminating solution and with decreasing times of exposure to the contaminating solution. Under the conditions of these experiments, the time required for the migration to reach equilibrium was on the order of months or longer. In separate experiments, the kinetics of adsorption and desorption of cobalt were measured as a function of concentration of the contaminating solution. The time required to reach adsorption equilibrium increased with increasing concentration in the contaminating solution. Times to sorption equilibrium were on the order of months. Desorption was much slower than adsorption and, together with intraparticle diffusion, probably controls the rate of migration from contaminated to uncontaminated sediment. The results of this study show that interparticle migration of metal cations can proceed at significant rates that are strongly influenced by the length of time that the metal has been in contact with the sediment. Copyright ?? 2001 Elsevier Science B.V.Sorption of metal cations by stream sediments is an important process affecting the movement of released contaminants in the environment. The ability of cations to desorb from one sediment particle and subsequently sorb to another can greatly affect metal transport rates but rates for this process have not been reported. The objective of this study was to determine the rate at which sorbed metals can migrate from contaminated sediment particles to uncontaminated sediment particles as a function of the concentration of the contaminating solution and the duration of the contact with the contaminating solution. Samples of small sediment particles were exposed to solutions containing cobalt, after which they were rinsed and combined with larger uncontaminated sediment particles in the presence of stream water. Initial concentrations of the contaminating solution ranged from 1 ng/l to 1000 mg/l and exposures to the contaminating solution ranged from 6 h to 14 days. The rate of the migration increased with increasing concentrations in the contaminating solution and with decreasing times of exposure to the contaminating solution. Under the conditions of these experiments, the time required for the migration to reach equilibrium was on the order of months or longer. In separate experiments, the kinetics of adsorption and desorption of cobalt were measured as a function of concentration of the contaminating solution. The time required to reach adsorption equilibrium increased with increasing concentration in the contaminating solution. Times to sorption equilibrium were on the order of months. Desorption was much slower than adsorption and, together with intraparticle diffusion, probably controls the rate of migration from contaminated to uncontaminated sediment. The results of this study show that interparticle migration of metal cations can proceed at significant rates that are strongly influenced by the length of time that the metal has

Journal of Hazardous Materials

Porosity factors that control the hydraulic conductivity of soil-saprolite transitional zones

Slowly permeable transitional horizons separate soil and saprolite, but these horizons cannot be identified easily in the field. The objectives of this study were to determine why the soil-saprolite transitional zone (BC and CB horizons) is slowly permeable, and to evaluate ways for identifying it in the field. Two saprolite deposits were studied in the North Carolina Piedmont. At each site, saturated and unsaturated hydraulic conductivities ( K sat and K unsat ) were measured for major horizons. Volume fractions of water-conducting pores were also compared with the changes in hydraulic conductivity with depth. Horizon mean K sat values at both sites ranged from virtually 0 to approximately 3 cm h -1 . The lowest K sat values (<0.3 cm h -1 ) occurred in or near the transitional horizons that were directly below the Bt horizons. Changes in the volume of pores within or between mineral grains (termed inter/intraparticle pores ) with depth corresponded to changes in both K sat and K unsat . In the transitional horizons, the inter/intraparticle pores were plugged with clay and this caused the horizons to have low K values. In situ measurements of K sat with depth were the most accurate technique to use for identifying transitional zones in the field. Examination of both the soil and rock structures in pits was also an acceptable technique. Texture and consistence were not considered reliable for pin-pointing transitional horizons.

North Carolina

Tectono-stratigraphic evolution of the Early Proterozoic Wisconsin magmatic terranes of the Penokean Orogen

The Early Proterozoic Penokean Orogen developed along the southern margin of the Archean Superior craton. The orogen consists of a northern deformed continental margin prism overlying an Archean basement and a southern assemblage of oceanic arcs, the Wisconsin magmatic terranes. The south-dipping Niagara fault (suture) zone separates the south-facing continental margin from the accreted arc terranes. The suture zone contains a dismembered ophiolite.The Wisconsin magmatic terranes consist of two terranes that are distinguished on the basis of lithology and structure. The northern Pembine–Wausau terrane contains a major succession of tholeiitic and calc-alkaline volcanic rocks deposited in the interval 1860–1889 Ma and a more restricted succession of calc-alkaline volcanic rocks deposited about 1835 – 1845 Ma. Granitoid rocks ranging in age from about 1870 to 1760 Ma intrude the volcanic rocks. The older succession was generated as island arcs and (or) closed back-arc basins above the south-dipping subduction zone (Niagara fault zone), whereas the younger one developed as island arcs above a north-dipping subduction zone, the Eau Pleine shear zone. The northward subduction followed deformation related to arc–continent collision at the Niagara suture at about 1860 Ma. The southern Marshfield terrane contains remnants of mafic to felsic volcanic rocks about 1860 Ma that were deposited on Archean gneiss basement, foliated tonalite to granite bodies ranging in age from about 1890 to 1870 Ma, and younger undated granite plutons. Following amalgamation of the two arc terranes along the Eau Pleine suture at about 1840 Ma, intraplate magmatism (1835 Ma) produced rhyolite and anorogenic alkali-feldspar granite that straddled the internal suture.

Wisconsin

Deep structure beneath Lake Ontario: Crustal-scale Grenville subdivisions

Lake Ontario marine seismic data reveal major Grenville crustal subdivisions beneath central and southern Lake Ontario separated by interpreted shear zones that extend to the lower crust. A shear zone bounded transition between the Elzevir and Frontenac terranes exposed north of Lake Ontario is linked to a seismically defined shear zone beneath central Lake Ontario by prominent aeromagnetic and gravity anomalies, easterly dipping wide-angle reflections, and fractures in Paleozoic strata. We suggest the central Lake Ontario zone represents crustal-scale deformation along an Elzevir&ndash;Frontenac boundary zone that extends from outcrop to the south shore of Lake Ontario.Seismic images from Lake Ontario and the exposed western Central Metasedimentary Belt are dominated by crustal-scale shear zones and reflection geometries featuring arcuate reflections truncated at their bases by apparent east-dipping linear reflections. The images show that zones analogous to the interpreted Grenville Front Tectonic Zone are also present within the Central Metasedimentary Belt and support models of northwest-directed crustal shortening for Grenvillian deep crustal deformation beneath most of southeastern Ontario.A Precambrian basement high, the Iroquoian high, is defined by a thinning of generally horizontal Paleozoic strata over a crestal area above the basement shear zone beneath central Lake Ontario. The Iroquoian high helps explain the peninsular extension into Lake Ontario forming Prince Edward County, the occurrence of Precambrian inlier outcrops in Prince Edward County, and Paleozoic fractures forming the Clarendon&ndash;Linden structure in New York.

Lake Ontario

Atlantic spotted and bottlenose dolphin sympatric distribution in nearshore waters off Bimini, The Bahamas, 2003–2018

Within nearshore waters off Bimini, The Bahamas, Atlantic spotted ( Stenella frontalis ) and common bottlenose ( Tursiops truncatus ) dolphins are sympatric but separated spatially in different geographic areas and water depth ranges. Afternoon surveys during summer months across a 16-year period showed S. frontalis used the northern part of the nearshore area more, while T. truncatus used the southern area more. Generally, examination of geographic zones and water depth distributions of both species before and after construction of a pier in the study area suggested these dolphins were not impacted, long-term, by this anthropogenic activity. Still some differences in use of the nearshore area were identified. For water depth, S. frontalis varied use between 5–<12 m and 12–<20 m, depending on location along the coast. In contrast, T. truncatus consistently used the 5–<12 m depths. This difference may be related to how each species used the nearshore area, with T. truncatus feeding more and S. frontalis travelling and doing other activities. A small change in the distribution of S. frontalis by water depth off the northern coast of Bimini was found, specifically an increased use of deeper (12–20 m) water post 2014, which is unlikely an effect of pier construction as S. frontalis continued to use the 5–12 m depths as they had before pier construction. How this change might be related to an unprecedented 2013 S. frontalis immigration event, which might have disrupted the social structure, habitat/resource use, and distribution of both species, is discussed.

Bimini

Integrating distance sampling survey data with population indices to separate trends in abundance and temporary immigration

Managers rely on accurate estimators of wildlife abundance and trends for management decisions. Despite the focus of contemporary wildlife science on developing methods to improve inference from wildlife surveys, legacy datasets often rely on index counts that lack information about the detection process. Data integration can be a useful tool for combining index counts with data collected under more rigorous designs (i.e., designs that account for the detection process), but care is required when datasets represent different population processes or are mismatched in space and time. This can be particularly problematic in cases where animals aggregate in response to a spatially or temporally limited resource because individuals may temporarily immigrate from outside the study area and be included in the abundance index. Abundance indices based on brown bear ( Ursus arctos ) feeding aggregations within coastal meadows in early summer in Lake Clark National Park and Preserve, Alaska, USA, are one such example. These indices reflect the target population (brown bears residing within the park) and temporary immigrants (i.e., bears drawn from outside the park boundary). To properly account for the effects of temporary immigration, we integrated the index data with abundance data collected via park-wide distance sampling surveys, the latter of which properly addressed the detection process. By assuming that the distance data provide inference on abundance and the index counts represent some combination of abundance and temporary immigration processes, we were able to decompose the relative contribution of each to overall trend. We estimated that the density of brown bears within our study area was 38–54 adults/1,000 km 2 during 2003–2019 and that abundance increased at a rate of approximately 1.4%/year. The contribution of temporary immigrants to overall trend in the index was low, so we created 3 hypothetical scenarios to more fully demonstrate how the integrated approach could be useful in situations where the composite trend in meadow counts may obscure trends in abundance (e.g., opposing trends in abundance and temporary immigration). Our work represents a conceptual advance supporting the integration of legacy index data with more rigorous data streams and is broadly applicable in cases where trends in index values may represent a mixture of population processes.

Alaska

Comparison of the Eastern and Western Kentucky coal fields (Pennsylvanian), USA-why are coal distribution patterns and sulfur contents so different in these coal fields?

More than 130 Mt of Pennsylvanian coal is produced annually from two coal fields in Kentucky. The Western Kentucky Coal Field occurs in part of the Illinois Basin, an intercratonic basin, and the Eastern Kentucky Coal Field occurs in the Central Appalachian Basin, a foreland basin. The basins are only separated by 140 km, but mined western Kentucky coal beds exhibit significantly higher sulfur values than eastern Kentucky coals. Higher-sulfur coal beds in western Kentucky have generally been inferred to be caused by more marine influences than for eastern Kentucky coals. Comparison of strata in the two coal fields shows that more strata and more coal beds accumulated in the Eastern than Western Kentucky Coal Field in the Early and Middle Pennsylvanian, inferred to represent greater generation of tectonic accommodation in the foreland basin. Eastern Kentucky coal beds exhibit a greater tendency toward splitting and occurring in zones than time-equivalent western Kentucky coal beds, which is also inferred to represent foreland accommodation influences, overprinted by autogenic sedimentation effects. Western Kentucky coal beds exhibit higher sulfur values than their eastern counterparts, but western Kentucky coals occurring in Langsettian through Bolsovian strata can be low in sulfur content. Eastern Kentucky coal beds may increase in sulfur content beneath marine zones, but generally are still lower in sulfur than mined Western Kentucky coal beds, indicating that controls other than purely marine influences must have influenced coal quality. The bulk of production in the Eastern Kentucky Coal Field is from Duckmantian and Bolsovian coal beds, whereas production in the Western Kentucky Coal Field is from Westphalian D coals. Langsettian through Bolsovian paleoclimates in eastern Kentucky were favorable for peat doming, so numerous low-sulfur coals accumulated. These coals tend to occur in zones and are prone to lateral splitting because of foreland tectonic and sedimentation influences. In contrast, Westphalian D coal beds of western Kentucky accumulated during low differential tectonic accommodation, and therefore tend to be widespread and uniform in characteristics, but exhibit higher sulfur values because they accumulated in seasonally drier paleoclimates that were unfavorable for peat doming. Hence, basin analyses indicate that many differences between the mined coals of Kentucky's two coal fields are related to temporal changes in paleoclimate and tectonic accommodation, rather than solely being a function of marine influences. ?? 2002 Elsevier Science B.V. All rights reserved.

International Journal of Coal Geology

Trace element abundances in major minerals of Late Permian coals from southwestern Guizhou province, China

Fourteen samples of minerals were separated by handpicking from Late Permian coals in southwestern Guizhou province, China. These 14 minerals were nodular pyrite, massive recrystallized pyrite, pyrite deposited from low-temperature hydrothermal fluid and from ground water; clay minerals; and calcite deposited from low-temperature hydrothermal fluid and from ground water. The mineralogy, elemental composition, and distribution of 33 elements in these samples were studied by optical microscopy, scanning electron microscope equipped with energy-dispersive X-ray spectrometer (SEM-EDX), X-ray diffraction (XRD), cold-vapor atomic absorption spectrometry (CV-AAS), atomic fluorescence spectrometry (AFS), inductively coupled-plasma mass spectrometry (ICP-MS), and ion-selective electrode (ISE). The results show that various minerals in coal contain variable amounts of trace elements. Clay minerals have high concentrations of Ba, Be, Cs, F, Ga, Nb, Rb, Th, U, and Zr. Quartz has little contribution to the concentration of trace elements in bulk coal. Arsenic, Mn, and Sr are in high concentrations in calcite. Pyrite has high concentrations of As, Cd, Hg, Mo, Sb, Se, Tl, and Zn. Different genetic types of calcite in coal can accumulate different trace elements; for example Ba, Co, Cr, Hg, Ni, Rb, Sn, Sr, and Zn are in higher concentrations in calcite deposited from low-temperature hydrothermal fluid than in that deposited from ground water. Furthermore, the concentrations of some trace elements are quite variable in pyrite; different genetic types of pyrites (Py-A, B, C, D) have different concentrations of trace elements, and the concentrations of trace elements are also different in pyrite of low-temperature hydrothermal origin collected from different locations. The study shows that elemental concentration is rather uniform in a pyrite vein. There are many micron and submicron mosaic pyrites in a pyrite vein, which is enriched in some trace elements, such as As and Mo. The content of trace element in pyrite vein depends upon the content of mosaic pyrite and of trace elements in it. Many environmentally sensitive trace elements are mainly contained in the minerals in coal, and hence the physical coal cleaning techniques can remove minerals from coal and decrease the emissions of potentially hazardous trace elements. ?? 2002 Elsevier Science B.V. All rights reserved.

International Journal of Coal Geology

Identification of a basaltic component on the Martian surface from Thermal Emission Spectrometer data

The Mars Global Surveyor Thermal Emission Spectrometer (TES) instrument collected 4.8×10 6 spectra of Mars during the initial aerobraking and science‐phasing periods of the mission (September 14, 1997, through April 29, 1998). Two previously developed atmosphere‐removal models were applied to data from Cimmeria Terra (25°S, 213°W). The surface spectra derived for these two models agree well, indicating that the surface and atmosphere emission can be separated and that the exact atmosphere‐removal model used has little effect on the derived surface composition. The Cimmeria spectra do not match terrestrial high‐silica igneous rocks (granite and rhyolite), ultramafic igneous rocks, limestone, or quartz‐ and clay‐rich sandstone and siltstone. A particulate (sand‐sized) sample of terrestrial flood basalt does provide an excellent match in both spectral shape and band depth to the Cimmeria spectrum over the entire TES spectral range. No unusual particle size effects are required to account for the observed spectral shape and depth. The implied grain size is consistent with the thermal inertia and albedo of this region, which indicate a sand‐sized surface with little dust. The identification of basalt is consistent with previous indications of pyroxene and basalt‐like compositions from visible/near‐infrared and thermal‐infrared spectral measurements. A linear spectral deconvolution model was applied to both surface‐only Cimmeria spectra using a library of 60 minerals to determine the composition and abundance of the component minerals. Plagioclase feldspar (45%; 53%) and clinopyroxene (26%; 19%) were positively identified above an estimated detection threshold of 10–15% for these minerals. The TES observations provide the first identification of feldspars on Mars. The best fit to the Mars data includes only clinopyroxene compositions; no orthopyroxene compositions are required to match the Cimmeria spectra. Olivine (12%; 12%) and sheet silicate (15%; 11%) were identified with lower confidence. Carbonates, quartz, and sulfates were not identified in Cimmeria at detection limits of ∼5, 5, and 10%, respectively. Their presence elsewhere, however, remains open. The Cimmeria spectra are not well matched by any one SNC meteorite spectrum, indicating that this region is not characterized by a single SNC lithology. The occurrence of unweathered feldspar and pyroxene in Cimmeria, together with the inferred presence of pyroxene and unweathered basalts in other dark regions and at the Viking and Pathfinder landing sites, provides evidence that extensive global chemical weathering of materials currently exposed on the Martian surface has not occurred.

Journal of Geophysical Research: Planets