Search USGSSearch

USGS · 70022687

Identification of a basaltic component on the Martian surface from Thermal Emission Spectrometer data

Abstract

The Mars Global Surveyor Thermal Emission Spectrometer (TES) instrument collected 4.8×10 6 spectra of Mars during the initial aerobraking and science‐phasing periods of the mission (September 14, 1997, through April 29, 1998). Two previously developed atmosphere‐removal models were applied to data from Cimmeria Terra (25°S, 213°W). The surface spectra derived for these two models agree well, indicating that the surface and atmosphere emission can be separated and that the exact atmosphere‐removal model used has little effect on the derived surface composition. The Cimmeria spectra do not match terrestrial high‐silica igneous rocks (granite and rhyolite), ultramafic igneous rocks, limestone, or quartz‐ and clay‐rich sandstone and siltstone. A particulate (sand‐sized) sample of terrestrial flood basalt does provide an excellent match in both spectral shape and band depth to the Cimmeria spectrum over the entire TES spectral range. No unusual particle size effects are required to account for the observed spectral shape and depth. The implied grain size is consistent with the thermal inertia and albedo of this region, which indicate a sand‐sized surface with little dust. The identification of basalt is consistent with previous indications of pyroxene and basalt‐like compositions from visible/near‐infrared and thermal‐infrared spectral measurements. A linear spectral deconvolution model was applied to both surface‐only Cimmeria spectra using a library of 60 minerals to determine the composition and abundance of the component minerals. Plagioclase feldspar (45%; 53%) and clinopyroxene (26%; 19%) were positively identified above an estimated detection threshold of 10–15% for these minerals. The TES observations provide the first identification of feldspars on Mars. The best fit to the Mars data includes only clinopyroxene compositions; no orthopyroxene compositions are required to match the Cimmeria spectra. Olivine (12%; 12%) and sheet silicate (15%; 11%) were identified with lower confidence. Carbonates, quartz, and sulfates were not identified in Cimmeria at detection limits of ∼5, 5, and 10%, respectively. Their presence elsewhere, however, remains open. The Cimmeria spectra are not well matched by any one SNC meteorite spectrum, indicating that this region is not characterized by a single SNC lithology. The occurrence of unweathered feldspar and pyroxene in Cimmeria, together with the inferred presence of pyroxene and unweathered basalts in other dark regions and at the Viking and Pathfinder landing sites, provides evidence that extensive global chemical weathering of materials currently exposed on the Martian surface has not occurred.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

P. R. Christensen, J. L. Bandfield, M. D. Smith, V.E. Hamilton, Roger N. Clark. 2000. Identification of a basaltic component on the Martian surface from Thermal Emission Spectrometer data. https://doi.org/10.1029/1999je001127

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

Origins of the water ice excavated by the Christmas Eve crater formation on Mars

On the 24th of December, 2021, a meteoroid struck the martian surface, producing a 150-m wide crater and excavating the lowest-latitude water ice observed on Mars to date. Knowledge of the preimpact depth, thickness and lateral continuity of the excavated ice would provide new insight into past environmental changes such as temperature and humidity of the atmosphere. In this work, we use the iSALE3D shock physics code to simulate the crater formation and constrain both the impact parameters and the original location of excavated ice. Analysis of the distal ejecta pattern suggests that the impact angle was 20±2.5◦ from horizontal. Based on a comparison of the simulated and observed crater morphology, we find the preimpact subsurface likely contained a stronger bedrock layer overlain by 15 m thick regolith layer. Our simulation results show that the ejected ice blocks visible in orbital images originated from shallow depths 3.2–11 m and from radii 30–60 m from the crater center. We conclude that the ice most likely originated from a massive ice layer at 3.2-11 m depth. The ice was likely also laterally discontinuous under the preimpact surface.

Journal of Geophysical Research: Planets

Likely ferromagnetic minerals identified by the Perseverance rover and implications for future paleomagnetic analyses of returned Martian samples

Although Mars today does not have a core dynamo, magnetizations in the Martian crust and in meteorites suggest a magnetic field was present prior to 3.7 billion years (Ga) ago. However, the lack of ancient, oriented Martian bedrock samples available on Earth has prevented accurate estimates of the dynamo's intensity, lifetime, and direction. Constraining the nature and lifetime of the dynamo are vital to understanding the evolution of the Martian interior and the potential habitability of the planet. The Perseverance rover, which is exploring Jezero crater, is providing an unprecedented opportunity to address this gap by acquiring absolutely oriented bedrock samples with estimated ages from ∼2.3 to >4.1 Ga. As a first step in establishing whether these samples could contain records of Martian paleomagnetism, it is important to determine their ferromagnetic mineralogy, the grain sizes of the phases, and the forms of any natural remanent magnetization. Here, we synthesize data from various Perseverance instruments to achieve those goals and discuss the implications for future laboratory paleomagnetic analyses. Using the rover's instrument payload, we find that cored samples likely contain iron oxides enriched in Cr and Ti. The relative proportions of Fe, Ti, and Cr indicate that the phases may be titanomagnetite or Fe-Ti-Cr spinels that are ferromagnetic at room temperature, but we cannot rule out the presence of non-ferromagnetic ulvöspinel, ilmenite, and chromite due to signal mixing. Importantly, the inferred abundance of iron oxides in the samples suggests that even <1 mm-sized samples will be easily measurable by present-day magnetometers.

Journal of Geophysical Research: Planets

Relationship between explosive and effusive volcanism in the Montes Apenninus region of the Moon

Lunar Pyroclastic Deposits (LPDs) are sites of explosive volcanism and often occur in areas of effusive volcanism on the Moon. On Earth, it has been observed that most volcanism has both effusive and explosive phases, whereas on the Moon, these two types of volcanism have typically been considered separately. We hypothesize that the relationship between explosive and effusive volcanism on the Moon is similar to what is observed on the Earth, where individual eruptions can experience multiple phases rather than one type of volcanism always preceding another or occurring separately. We present observations from the Moon Mineralogy Mapper detailing compositional relationships between volcanic features in the lunar Montes Apenninus region. We evaluated whether co-located LPDs and effusive features (e.g., rilles, mare) could have erupted from the same volcanic vent or even at the same time based on their compositional similarities and stratigraphic relationships. We found that the LPDs have varied stratigraphic relationships with co-located effusive features. We identified LPDs near sinuous rilles that may be related to the formation of the rille, where explosive and effusive volcanism occurred at the same vent (e.g., Mozart Rille), and LPDs that may be unrelated to the rille (e.g., Rimae Bode and Rima Bode LPD). Our results suggest that lunar volcanism can mirror terrestrial volcanism, with explosive and effusive eruptions demonstrating more complex dynamics and relationships than previously thought. This variability suggests that the relationship between LPDs and nearby volcanic features cannot be generalized for studies on their resource potential, eruption styles, or deposit volume.

Journal of Geophysical Research: Planets