SEARCH · Search USGS

Results for “Applied Optics”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5Linked to original sources

USGS2026

Luminescence dating of hydrothermal explosions in the Yellowstone Plateau volcanic field

Hydrothermal explosions are a significant geological hazard in some active volcanic systems; however, the timing and triggering mechanisms of these explosions are poorly constrained. This study applies luminescence dating techniques to hydrothermal explosion deposits in the Yellowstone Plateau volcanic field to constrain explosion chronologies and evaluate potential triggering mechanisms. We tested four luminescence dating techniques: K-feldspar post-infrared infrared stimulated luminescence (pIRIR225), quartz blue light optically stimulated luminescence (BLOSL), quartz blue thermoluminescence (BTL), and quartz red thermoluminescence (RTL). The pIRIR225 and RTL protocols produce consistent age estimates that agree with independent radiocarbon ages and with the timing of the Pinedale deglaciation. This study focuses on two craters, Mary Bay, along the northern shore of Yellowstone Lake, and Pocket Basin in Lower Geyser Basin. The mean pIRIR225 ages from Mary Bay deposits (11.99 ± 0.68 ka) agree with previous radiocarbon constraints. The mean pIRIR225 results from Pocket Basin deposits (13.44 ± 1.06 ka) suggest a history of explosion following Pinedale deglaciation, followed by recent hydrothermal alteration. Luminescence dating techniques are a promising tool for reconstructing the timing of hydrothermal explosions in the Late Pleistocene and Holocene, helping to constrain recurrence intervals of the largest hydrothermal systems, informing risk, and improving hazard assessments.

Idaho, Montana, Wyoming↗

USGS1982

Analysis of barium and strontium in sediments by dc plasma emission spectrometry

The dc plasma arc is suited to analysis of barium and strontium in a wide range of sedimentary rock matrices, from sands, shales, and carbonates, to ferromanganese nodules. Samples containing 10 ppm to more than 3000 ppm barium and strontium were studied. Both alkali (3500 ppm lithium borate, from a preliminary fusion) and lanthanum salts (1%) in the final solution are needed to achieve freedom from systematic effects due to extreme variation in matrix. In the absence of La, neither Li, Na, K, nor Cs totally eliminated effects of Al and other constituents on emission. Silica addition to the fusion helps achieve proper flux viscosity to aid removal of fused beads from graphite crucibles. The effect of refractory-substance formers such as aluminum with calcium can be reduced or removed by selection of a portion of the arc for emission measurement. However, it was decided not to pursue this approach because of loss in analytical sensitivity and need for greater precision in optical adjustment. Analysis of standard rock samples showed generally satisfactory agreement with precision methods of analysis, and some new standard rock data are reported.

Applied Spectroscopy↗

USGS2016

The removal kinetics of dissolved organic matter and the optical clarity of groundwater

Concentrations of dissolved organic matter (DOM) and ultraviolet/visible light absorbance decrease systematically as groundwater moves through the unsaturated zones overlying aquifers and along flowpaths within aquifers. These changes occur over distances of tens of meters (m) implying rapid removal kinetics of the chromophoric DOM that imparts color to groundwater. A one-compartment input-output model was used to derive a differential equation describing the removal of DOM from the dissolved phase due to the combined effects of biodegradation and sorption. The general solution to the equation was parameterized using a 2-year record of dissolved organic carbon (DOC) concentration changes in groundwater at a long-term observation well. Estimated rates of DOC loss were rapid and ranged from 0.093 to 0.21 micromoles per liter per day (μM d −1 ), and rate constants for DOC removal ranged from 0.0021 to 0.011 per day (d −1 ). Applying these removal rate constants to an advective-dispersion model illustrates substantial depletion of DOC over flow-path distances of 200 m or less and in timeframes of 2 years or less. These results explain the low to moderate DOC concentrations (20–75 μM; 0.26–1 mg L −1 ) and ultraviolet absorption coefficient values ( a 254 < 5 m −1 ) observed in groundwater produced from 59 wells tapping eight different aquifer systems of the United States. The nearly uniform optical clarity of groundwater, therefore, results from similarly rapid DOM-removal kinetics exhibited by geologically and hydrologically dissimilar aquifers.

California, Colorado, Connecticut, Georgia, Illino↗

USGS2021

Synthesis of geochronologic research on Late Pliocene to Holocene emergent shorelines in the lower Savannah River area of southeastern Georgia, USA

Emergent late Pliocene and Pleistocene shoreline deposits, morphologically identifiable Pleistocene shoreline units, and seaward-facing scarps characterize the easternmost Atlantic Coastal Plain (ACP) of the United States of America. In some areas of the ACP, these deposits, units, and scarps have been studied in detail. Within these areas, temporal and spatial data are sufficient for time-depositional frameworks for shoreline-evolution to have been developed and published. For other areas, such as the southeastern Atlantic Coastal Plain (SEACP), available data are conflicting and (or) insufficient to develop such a framework, or to make shoreline correlations. Differential epeirogenic uplift and shoreline deformation, resulting from mantle-flow and climate-induced isostatic adjustments, complicate regional shoreline correlations. In the SEACP, the topographically prominent Orangeburg Scarp (hereafter, the Scarp) rises tens of meters in elevation from southeastern Georgia to southeastern North Carolina. The degree to which the Scarp and shoreline units seaward of the Scarp are deformed continues to be debated, but there is general agreement that the lower Savannah River area (LSRA) of Georgia and South Carolina is the least deformed area of the SEACP. This paper synthesizes published and previously unpublished numerical age and stratigraphic data for emergent Pliocene and younger shoreline deposits in the LSRA in Georgia. Age data are applied to these shoreline deposits as they are delineated (map units) on the 1976 geologic map of Georgia by Lawton and others. Age assignments are based on stratigraphic position, fossil content, soil and weathering diagnostic properties, and numerical ages as determined by meteoric Beryllium‑10 paleosol residence time ( 10 BePRT), optically stimulated luminescence (OSL), uranium disequilibrium series (U-series), amino acid racemization (AAR), and radiocarbon ( 14 C) analyses. These data provide a preliminary Pliocene-Pleistocene geochronology for the Orangeburg Scarp and shoreline deposits seaward of the Scarp in the LSRA of Georgia. Minimum ages and age ranges indicate the following: the Orangeburg Scarp formed sometime in the late Pliocene and early Pleistocene, between 3 Ma and 1 Ma; three, and possibly four, shoreline complexes were deposited in the middle Pleistocene; two shoreline complexes were deposited in the late middle and the late Pleistocene; deposition of the youngest shoreline complex began in the late Pleistocene and continues to the present; each shoreline complex was modified by multiple sea level highstands over time periods that lasted tens of thousands to hundreds of thousands of years; and Pleistocene shoreline chronology differs in part from modeled global sea level highstands.

Georgia, South Carolina↗

USGS1947

The sensitized luminescence of manganese-activated calcite

Synthetic manganese-activated calcites are shown to be practically inert to ultraviolet excitation in the range 2000-3500A, while they are luminescent under cathode-ray excitation. The incorporation of small amounts of an auxiliary impurity along with the manganese produces the strong response to ultraviolet radiation hitherto ascribed to CaCO3:Mn itself. Three such impurities have been studied: lead, thallium, and cerium. The first two induce excitation in the neighborhood of the mercury resonance line, while the cerium introduces a response principally to longer wave ultraviolet. The strong response to 2537A excitation shown by some natural calcites is likewise found to be due to the presence of lead along with the manganese, rather than to the manganese alone. The data do not warrant ascribing the longer wave-length ultraviolet-excited luminescence of all natural calcites to the action of an auxiliary impurity. The essential identity of the cathode-ray excited luminescence spectra of CaCO 3:Mn, CaCO3: (Pb+Mn), CaCO3:(Tl+Mn), and CaCO3:(Ce+Mn) with the 2537A-excited spectra of the latter three is evidence that the luminescent center in all cases is the manganese ion or the MnO6 group. It is shown that a "cascade" mechanism for the action of the auxiliary impurities, lead, thallium, and cerium, is incorrect; and that the phenomenon must be considered as a case of sensitized luminescence. Owing to the nature of cathode-ray excitation, the manganese activator can be excited by this agent even in the absence of a second impurity. For optical excitation, however, an absorption band for the ultraviolet must be established by building into the CaCO3:Mn a second impurity or "sensitizer.".

Journal of Applied Physics↗

USGS2018

Operational tracking of lava lake surface motion at Kīlauea Volcano, Hawai‘i

Surface motion is an important component of lava lake behavior, but previous studies of lake motion have been focused on short time intervals. In this study, we implement the first continuous, real-time operational routine for tracking lava lake surface motion, applying the technique to the persistent lava lake in Halema‘uma‘u Crater at the summit of Kīlauea Volcano, Hawai‘i. We measure lake motion by using images from a fixed thermal camera positioned on the crater rim, transmitting images to the Hawaiian Volcano Observatory (HVO) in real time. We use an existing optical flow toolbox in Matlab to calculate motion vectors, and we track the position of lava upwelling in the lake, as well as the intensity of spattering on the lake surface. Over the past 2 years, real-time tracking of lava lake surface motion at Halema‘uma‘u has been an important part of monitoring the lake’s activity, serving as another valuable tool in the volcano monitoring suite at HVO.

Hawai‘i↗

USGS2017

Remote measurement of river discharge using thermal particle image velocimetry (PIV) and various sources of bathymetric information

Although river discharge is a fundamental hydrologic quantity, conventional methods of streamgaging are impractical, expensive, and potentially dangerous in remote locations. This study evaluated the potential for measuring discharge via various forms of remote sensing, primarily thermal imaging of flow velocities but also spectrally-based depth retrieval from passive optical image data. We acquired thermal image time series from bridges spanning five streams in Alaska and observed strong agreement between velocities measured in situ and those inferred by Particle Image Velocimetry (PIV), which quantified advection of thermal features by the flow. The resulting surface velocities were converted to depth-averaged velocities by applying site-specific, calibrated velocity indices. Field spectra from three clear-flowing streams provided strong relationships between depth and reflectance, suggesting that, under favorable conditions, spectrally-based bathymetric mapping could complement thermal PIV in a hybrid approach to remote sensing of river discharge; this strategy would not be applicable to larger, more turbid rivers, however. A more flexible and efficient alternative might involve inferring depth from thermal data based on relationships between depth and integral length scales of turbulent fluctuations in temperature, captured as variations in image brightness. We observed moderately strong correlations for a site-aggregated data set that reduced station-to-station variability but encompassed a broad range of depths. Discharges calculated using thermal PIV-derived velocities were within 15% of in situ measurements when combined with depths measured directly in the field or estimated from field spectra and within 40% when the depth information also was derived from thermal images. The results of this initial, proof-of-concept investigation suggest that remote sensing techniques could facilitate measurement of river discharge.

Journal of Hydrology↗

USGS2008

A new method for synthesizing fluid inclusions in fused silica capillaries containing organic and inorganic material

Considerable advances in our understanding of physicochemical properties of geological fluids and their roles in many geological processes have been achieved by the use of synthetic fluid inclusions. We have developed a new method to synthesize fluid inclusions containing organic and inorganic material in fused silica capillary tubing. We have used both round (0.3 mm OD and 0.05 or 0.1 mm ID) and square cross-section tubing (0.3 ?? 0.3 mm with 0.05 ?? 0.05 mm or 0.1 ?? 0.1 mm cavities). For microthermometric measurements in a USGS-type heating-cooling stage, sample capsules must be less than 25 mm in length. The square-sectioned capsules have the advantage of providing images without optical distortion. However, the maximum internal pressure (P; about 100 MPa at 22 ??C) and temperature (T; about 500 ??C) maintained by the square-sectioned capsules are less than those held by the round-sectioned capsules (about 300 MPa at room T, and T up to 650 ??C). The fused silica capsules can be applied to a wide range of problems of interest in fluid inclusion and hydrothermal research, such as creating standards for the calibration of thermocouples in heating-cooling stages and frequency shifts in Raman spectrometers. The fused silica capsules can also be used as containers for hydrothermal reactions, especially for organic samples, including individual hydrocarbons, crude oils, and gases, such as cracking of C18H38 between 350 and 400 ??C, isotopic exchanges between C18H38 and D2O and between C19D40 and H2O at similar temperatures. Results of these types of studies provide information on the kinetics of oil cracking and the changes of oil composition under thermal stress. When compared with synthesis of fluid inclusions formed by healing fractures in quartz or other minerals or by overgrowth of quartz at elevated P-T conditions, the new fused-silica method has the following advantages: (1) it is simple; (2) fluid inclusions without the presence of water can be formed; (3) synthesized inclusions are large and uniform, and they are able to tolerate high internal P; (4) it is suitable for the study of organic material; and (5) redox control is possible due to high permeability of the fused silica to hydrogen.

Geochimica et Cosmochimica Acta↗

USGS2025

Improving hydroacoustic methods for monitoring suspended-sand flux and grain size in sediment-laden rivers

Suspended-sand concentration and grain-size data in rivers provide valuable information on the catchment's dynamics for scientists and river managers. Producing continuous measurements of suspended-sand concentrations remains a scientific challenge due to their high spatial and temporal variability. Traditional methods such as sediment-rating curves may be highly uncertain, and optical turbidity is insensitive to coarse particles when there are many fine particles. Surrogate hydroacoustic methods aim to improve sand concentration measurements. These single- or dual-frequency acoustic methods use acoustic attenuation and/or backscatter to estimate fine-sediment (i.e., silt and clay) and/or sand concentration and possibly grain size. New methods have recently been developed and applied in rivers exhibiting a wide range of sediment conditions in North America but not independently tested elsewhere by other researchers. In this article, we apply, adapt and evaluate hydroacoustic methods to continuously estimate suspended-sand concentration and grain size in an Alpine river with high suspended-sediment concentrations. From the example of the River Isère at Grenoble Campus, France, we show that the hydroacoustic methods adapted to local conditions may yield valuable sand concentration estimates consistent with traditional measurements. Compared with prior knowledge, limited additional information on the grain size can be obtained due to high uncertainties. Hydroacoustic concentration estimates are more sensitive to real changes in concentration at the event scale than traditional rating-curve methods that relate concentration to discharge only. These findings open the perspective for facilitated sand concentration monitoring at a higher temporal resolution with decreased field work.

Grenoble Campus↗

USGS2026

Evaluating drivers of environmental change in a lake sediment core: Insights from spectroscopic metrics of water-extractable organic matter and stable carbon isotopes

Freshwater lakes play a critical role in the global carbon cycle by storing and transforming organic matter (OM) from both terrestrial and aquatic sources. Small lakes in northern temperate regions, despite their limited surface area, disproportionately influence regional carbon budgets. Buried sediments integrate OM inputs over time and archive ecosystem responses to natural and anthropogenic disturbances. However, the direction and magnitude of recent environmental changes on sediment carbon (C) dynamics remain poorly understood. A 23-cm core was collected from a small temperate lake in northeastern USA to evaluate sediment OM content and composition over timescales relevant to historical land-use change, damming, and recovery from acid deposition. Patterns in OM burial and source contributions were revealed via elemental and isotopic analyses of bulk OM and ultraviolet-visible spectrophotometry of water-extractable organic matter (WEOM). The optical metrics expanded observations of likely OM sources beyond the information gained from bulk carbon metrics (total carbon, δ 13 C). The aromaticity of WEOM increased downcore, which is consistent with a shift from increased terrestrial inputs during early logging and damming activity (pre ∼1920) to more microbial-derived OM in recent surficial sediments. Future applications of WEOM optical properties as complements to traditional geochemical metrics can enhance interpretations of lake ecosystem responses recorded in lake sediments to environmental perturbations in temperate lakes.

New York↗

USGS2014

Evaluation of a mass-balance approach to determine consumptive water use in northeastern Illinois

A principal component of evaluating and managing water use is consumptive use. This is the portion of water withdrawn for a particular use, such as residential, which is evaporated, transpired, incorporated into products or crops, consumed by humans or livestock, or otherwise removed from the immediate water environment. The amount of consumptive use may be estimated by a water (mass)-balance approach; however, because of the difficulty of obtaining necessary data, its application typically is restricted to the facility scale. The general governing mass-balance equation is: Consumptive use = Water supplied - Return flows . This study explored a mass-balance field-based computation of consumptive use in a residential setting at the scale of a sanitary sewer service area (sewershed). In addition, the feasibility (cost and difficulty) and relative uncertainties (accuracies) associated with applying the approach at this scale were evaluated. The study was conducted during 2011–13 within a 3.5-square mile (mi 2 ) sewershed confined to a predominantly residential area of Elk Grove Village, Illinois. Following background evaluation of the geohydrologic setting, sewershed infrastructure, and possible components of supplied and returned water, the identified primary components were 1. public water deliveries by the Elk Grove Village Department of Public Works, 2. self-served groundwater withdrawals in an included unincorporated neighborhood with public sanitary sewer service, 3. return flows to the sanitary sewer system, and 4. direct return of water discharged from swimming pools to Salt Creek. Water volumes principally were reported for deliveries, measured for sanitary sewer returns by using an acoustic Doppler current-velocity meter, and estimated for domestic withdrawals and swimming pool discharges to storm sewers. All water volumes required some degree of estimation. Observation wells were installed adjacent to sewer pipelines (lines) to determine the depth of the water table relative to that of the sewer lines and to collect water samples for detection of optical brighteners, as they are routinely discharged as clotheswashing waste to sanitary sewers. These data provided qualitative information on gains (inflow and infiltration) and losses (exfiltration) of sewer flow by pipe leakage, which might otherwise not be considered in the sewer flow return measurements. Hydrographs of sewer flow also were evaluated to identify and estimate storm-associated inputs to sewer flow. The volume of sanitary sewer return flow (778 million gallons per year [Mgal/yr]) was determined to substantially exceed the volume of supplied water (566 Mgal/yr), thus, for this study setting, voiding the utility of the applied mass-balance approach for estimating consumptive water use. Mass-balance components, including sanitary sewer flow and supplied-water use, were estimated within reasonable limits of uncertainty. Evidence of a water table that is typically shallower than the area’s sewer lines, yet is sometimes depressed near more deeply buried sewer lines, suggests groundwater infiltration into the sewers contributes to the excess volume of return flow. Technical obstacles and project resources precluded accurate quantification of infiltration volumes and other gains and losses to sanitary sewer flow. As estimated from various simplified methods, a minimum of 26 percent of return flow measured in the sanitary sewer represented groundwater infiltration and stormwater inflow; separately, about 2 percent of return flow was estimated as inflow. On the basis of the alternative winter base-rate method, consumptive use in the sewershed was estimated as 13 percent, which compares favorably with that used by the State of Illinois for Lake Michigan allocation accounting (10 percent) and other States and Canadian Provinces in the Great Lakes region (generally 10-15 percent). The study also provided other findings considered useful to studies of water use and to performance evaluation of sanitary sewer infrastructure. In urban residential settings, the comparatively small volumes of nonpublic sources of water (self-supplied) and direct (nonsanitary) return flow potentially can be ignored in the estimation of consumptive use. An acoustic Doppler current-velocity meter can be used in sanitary sewers to accurately measure discharge and reasonably estimate storm-associated inflows. Hourly to daily patterns of water use can be readily identified and quantified in the return flow record for the sanitary sewers. Relative volumes of infiltration gains (and exfiltration losses) can be substantial, even in sewer systems of communities making significant investments in system upgrades to limit sewer line leakage. Monitoring of optical brighteners in groundwater (and potentially in sanitary sewer flow) can provide a useful means of identifying probable leakage from (and to) sewer lines. Accurate quantification of gains and losses to sanitary sewer flow at the sewershed scale will require additional research effort and technical advances. Under ideal conditions, accurate quantification of consumptive use at the sewershed scale by the described mass-balance approach might be possible. Under most prevailing conditions, quantification likely would be more costly and time consuming than that of the present study, given the freely contributed technical support of the host community and relatively appropriate conditions of the study area. Essentials to quantification of consumptive use are a fully cooperative community, storm and sanitary sewers that are separate, and newer sewer infrastructure and (or) a robust program for limiting infiltration, exfiltration, and inflow.

Illinois↗

USGS1993

Compositing multitemporal remote sensing data sets

To eliminate cloud and atmosphere-affected pixels, the compositing of multi temporal remote sensing data sets is done by selecting the maximum vale of the normalized different vegetation index (NDVI) within a compositing period. The NDVI classifier, however, is strongly affected by surface type and anisotropic properties, sensor viewing geometries, and atmospheric conditions. Consequently, the composited, multi temporal, remote sensing data contain substantial noise from these external conditions. Consequently, the composited, multi temporal, remote sensing data contain substantial noise from these external effects. To improve the accuracy of compositing products, two key approaches can be taken: one is to refine the compositing classifier (NDVI) and the other is to improve existing compositing algorithms. In this project, an alternative classifier was developed and an alternative pixel selection criterion was proposed for compositing. The new classifier and the alternative compositing algorithm were applied to an advanced very high resolution radiometer data set of different biome types in the United States. The results were compared with the maximum value compositing and the best index slope extraction algorithms. The new approaches greatly reduced the high frequency noises related to the external factors and repainted more reliable data. The results suggest that the geometric-optical canopy properties of specific biomes may be needed in compositing. Limitations of the new approaches include the dependency of pixel selection on the length of the composite period and data discontinuity.

Pecora 12 Symposium↗

USGS2006

Overview of selected surrogate technologies for continuous suspended-sediment monitoring

Surrogate technologies for inferring selected characteristics of suspended sediments in surface waters are being tested by the U.S. Geological Survey and several partners with the ultimate goal of augmenting or replacing traditional monitoring methods. Optical properties of water such as turbidity and optical backscatter are the most commonly used surrogates for suspended-sediment concentration, but use of other techniques such as those based on acoustic backscatter, laser diffraction, digital photo-optic, and pressure-difference principles is increasing for concentration and, in some cases, particle-size distribution and flux determinations. The potential benefits of these technologies include acquisition of automated, continuous, quantifiably accurate data obtained with increased safety and at less expense. When suspended-sediment surrogate data meet consensus accuracy criteria and appropriate sediment-record computation techniques are applied, these technologies have the potential to revolutionize the way fluvial-sediment data are collected, analyzed, and disseminated.

Conference Paper↗

USGS2007

A multiple-tracer approach for identifying sewage sources to an urban stream system

The presence of human-derived fecal coliform bacteria (sewage) in streams and rivers is recognized as a human health hazard. The source of these human-derived bacteria, however, is often difficult to identify and eliminate, because sewage can be delivered to streams through a variety of mechanisms, such as leaking sanitary sewers or private lateral lines, cross-connected pipes, straight pipes, sewer-line overflows, illicit dumping of septic waste, and vagrancy. A multiple-tracer study was conducted to identify site-specific sources of sewage in Accotink Creek, an urban stream in Fairfax County, Virginia, that is listed on the Commonwealth's priority list of impaired streams for violations of the fecal coliform bacteria standard. Beyond developing this multiple-tracer approach for locating sources of sewage inputs to Accotink Creek, the second objective of the study was to demonstrate how the multiple-tracer approach can be applied to other streams affected by sewage sources. The tracers used in this study were separated into indicator tracers, which are relatively simple and inexpensive to apply, and confirmatory tracers, which are relatively difficult and expensive to analyze. Indicator tracers include fecal coliform bacteria, surfactants, boron, chloride, chloride/bromide ratio, specific conductance, dissolved oxygen, turbidity, and water temperature. Confirmatory tracers include 13 organic compounds that are associated with human waste, including caffeine, cotinine, triclosan, a number of detergent metabolites, several fragrances, and several plasticizers. To identify sources of sewage to Accotink Creek, a detailed investigation of the Accotink Creek main channel, tributaries, and flowing storm drains was undertaken from 2001 to 2004. Sampling was conducted in a series of eight synoptic sampling events, each of which began at the most downstream site and extended upstream through the watershed and into the headwaters of each tributary. Using the synoptic sampling approach, 149 sites were sampled at least one time for indicator tracers; 52 of these sites also were sampled for confirmatory tracers at least one time. Through the analysis of multiple-tracer levels in the synoptic samples, three major sewage sources to the Accotink Creek stream network were identified, and several other minor sewage sources to the Accotink Creek system likely deserve additional investigation. Near the end of the synoptic sampling activities, three additional sampling methods were used to gain better understanding of the potential for sewage sources to the watershed. These additional sampling methods included optical brightener monitoring, intensive stream sampling using automated samplers, and additional sampling of several storm-drain networks. The samples obtained by these methods provided further understanding of possible sewage sources to the streams and a better understanding of the variability in the tracer concentrations at a given sampling site. Collectively, these additional sampling methods were a valuable complement to the synoptic sampling approach that was used for the bulk of this study. The study results provide an approach for local authorities to use in applying a relatively simple and inexpensive collection of tracers to locate sewage sources to streams. Although this multiple-tracer approach is effective in detecting sewage sources to streams, additional research is needed to better detect extremely low-volume sewage sources and better enable local authorities to identify the specific sources of the sewage once it is detected in a stream reach.

Virginia↗

USGS2025

Landsat surface product validation instrumentation: The BigMAC exercise

Users of Earth remotely sensed optical imagery are increasingly demanding a surface reflectance or surface temperature product instead of the top-of-atmosphere products that have been produced historically. Validating the accuracy of surface products remains a difficult task since it involves assessment across a range of atmospheric profiles, as well as many different land surface types. Thus, standard approaches from the satellite calibration community do not apply and new technologies need to be developed. The Big Multi-Agency Campaign (BigMAC) was developed to assess current technologies that might be used for validation of surface products derived from satellite imagery, with emphasis on Landsat. Conducted in August, 2021, in Brookings, SD, USA, a variety of measurement technologies were fielded and assessed for accuracy, precision, and deployability. Each technology exhibited its strengths and weaknesses. Handheld spectroradiometers are capable of surface reflectance measurements with accuracies in the 0.01 - 0.02 absolute reflectance units, but are expensive to deploy. Unmanned Aircraft System (UAS)-based radiometers have the potential of making measurements with similar accuracy, but are also difficult to deploy. Mirror-based empirical line methods showed improving accuracy potential, but deployment also remains an issue. However, there are inexpensive radiometers designed for long-term autonomous use that exhibited good accuracy and precision, as well as being easy to deploy. Thermal measurement technologies showed accuracy potential in the 1 - 2K range, and some easily deployable instruments are available. Results from BigMAC indicate there are technologies available today to begin making operational surface reflectance/temperature measurements and strong potential for improvements in the future.

Sensors↗

USGS2023

Critical minerals: Germanium and cobalt in the Bornite deposit, southwestern Brooks Range, Alaska

Increasing demand for Ge and Co has led to a renewed interest and focus on advancing our understanding of the occurrence, distribution, and sequestration of these critical elements in known ore deposits. A workflow using a variety of analytical techniques and co-registered datasets has been developed and was applied to the carbonate hosted Bornite Cu-Co (Zn,-Ge) deposit in Alaska, where a new orebody (“the South Reef”) was discovered in 2011. The South Reef is host to substantial amounts of high-grade Cu, Co, and appreciable Zn, but also contains localised elevated concentrations of Ge. We describe the mineralogy and paragenesis of the South Reef based on detailed optical petrography, scanning electron microscopy, scanning electron microscopy-based automated mineralogy, and mapping μ-X-ray fluorescence analysis. Germanium was found to exist in renierite, white mica, illite, galena and feldspars within the South Reef. Cobalt was found to occur in cobaltiferous pyrite, carrollite, and cobaltite.

Alaska↗

USGS2008

MODIS and SeaWIFS on-orbit lunar calibration

The Moon plays an important role in the radiometric stability monitoring of the NASA Earth Observing System's (EOS) remote sensors. The MODIS and SeaWIFS are two of the key instruments for NASA's EOS missions. The MODIS Protoflight Model (PFM) on-board the Terra spacecraft and the MODIS Flight Model 1 (FM1) on-board the Aqua spacecraft were launched on December 18, 1999 and May 4, 2002, respectively. They view the Moon through the Space View (SV) port approximately once a month to monitor the long-term radiometric stability of their Reflective Solar Bands (RSB). SeaWIFS was launched on-board the OrbView-2 spacecraft on August 1, 1997. The SeaWiFS lunar calibrations are obtained once a month at a nominal phase angle of 7??. The lunar irradiance observed by these instruments depends on the viewing geometry. The USGS photometric model of the Moon (the ROLO model) has been developed to provide the geometric corrections for the lunar observations. For MODIS, the lunar view responses with corrections for the viewing geometry are used to track the gain change for its reflective solar bands (RSB). They trend the system response degradation at the Angle Of Incidence (AOI) of sensor's SV port. With both the lunar observation and the on-board Solar Diffuser (SD) calibration, it is shown that the MODIS system response degradation is wavelength, mirror side, and AOI dependent. Time-dependent Response Versus Scan angle (RVS) Look-Up Tables (LUT) are applied in MODIS RSB calibration and lunar observations play a key role in RVS derivation. The corrections provided by the RVS in the Terra and Aqua MODIS data from the 412 nm band are as large as 16% and 13%, respectively. For SeaWIFS lunar calibrations, the spacecraft is pitched across the Moon so that the instrument views the Moon near nadir through the same optical path as it views the Earth. The SeaWiFS system gain changes for its eight bands are calibrated using the geometrically-corrected lunar observations. The radiometric corrections to the SeaWiFS data, after more than ten years on orbit, are 19% at 865 nm, 8% at 765 nm, and 1-3% in the other bands. In this report, the lunar calibration algorithms are reviewed and the RSB gain changes observed by the lunar observations are shown for all three sensors. The lunar observations for the three instruments are compared using the USGS photometric model. The USGS lunar model facilitates the cross calibration of instruments with different spectra bandpasses whose measurements of the Moon differ in time and observing geometry.

Conference Paper↗

USGS2004

Acoustic and optical borehole-wall imaging for fractured-rock aquifer studies

Imaging with acoustic and optical televiewers results in continuous and oriented 360° views of the borehole wall from which the character, relation, and orientation of lithologic and structural planar features can be defined for studies of fractured-rock aquifers. Fractures are more clearly defined under a wider range of conditions on acoustic images than on optical images including dark-colored rocks, cloudy borehole water, and coated borehole walls. However, optical images allow for the direct viewing of the character of and relation between lithology, fractures, foliation, and bedding. The most powerful approach is the combined application of acoustic and optical imaging with integrated interpretation. Imaging of the borehole wall provides information useful for the collection and interpretation of flowmeterand other geophysical logs, core samples, and hydraulic and water-quality data from packer testing and monitoring.

Journal of Applied Geophysics↗