Search USGS⌕ Search

SEARCH · Search USGS

Results for “Sensors”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4Linked to original sources
USGS2008

Evaluation of candidate Landsat Data Gap Sensors

The capabilities of the currently operational Landsat satellites may be lost before the launch of the follow-on Landsat Data Continuity Mission (LDCM), thus producing a gap in the Landsat data record and the National Satellite Land Remote Sensing Data Archive (NSLRSDA). In anticipation of a gap, the Federal agencies responsible for Landsat program management, the National Aeronautics and Space Administration (NASA) and the Department of Interior (DOI) U. S. Geological Survey (USGS), convened a Landsat Data Gap Study Team (LDGST). The study team assessed the basic characteristics of multiple systems and identified sensors aboard the China-Brazil Earth Resources Satellite (CBERS-2) and the Indian Remote Sensing (IRS-P6) ResourceSat-1 satellite as the most promising sources of Landsat-like data. The sensors include the combination of CBERS-2 Infrared Multi-spectral Scanner (IRMSS) and High Resolution Charged Coupled Device (CCD), as well as the IRS-P6 Advanced Wide Field Sensor (AWiFS) and the IRS-P6 Linear Imaging Self Scanning Sensor (LISS-III). The study team concluded that more robust technical evaluations of data and sensor performance are required before gap mitigation strategies can be fully formulated. A technical report is made available that summarizes the results from those evaluations, including the initial data characterization and science utility evaluation. The report can be accessed at http://calval.cr.usgs.gov/LDGST.php.

Conference Paper↗
USGS2010

The use of the Sonoran Desert as a pseudo-invariant site for optical sensor cross-calibration and long-term stability monitoring

The Sonoran Desert is a large, flat, pseudo-invariant site near the United States-Mexico border. It is one of the largest and hottest deserts in North America, with an area of 311,000 square km. This site is particularly suitable for calibration purposes because of its high spatial and spectral uniformity and reasonable temporal stability. This study uses measurements from four different sensors, Terra Moderate Resolution Imaging Spectroradiometer (MODIS), Landsat 7 (L7) Enhanced Thematic Mapper Plus (ETM+), Aqua MODIS, and Landsat 5 (L5) Thematic Mapper (TM), to assess the suitability of this site for long-term stability monitoring and to evaluate the “radiometric calibration differences” between spectrally matching bands of all four sensors. In general, the drift in the top-of-atmosphere (TOA) reflectance of each sensor over a span of nine years is within the specified calibration uncertainties. Monthly precipitation measurements of the Sonoran Desert region were obtained from the Global Historical Climatology Network (GHCN), and their effects on the retrieved TOA reflectances were evaluated. To account for the combined uncertainties in the TOA reflectance due to the surface and atmospheric Bi-directional Reflectance Distribution Function (BRDF), a semi-empirical BRDF model has been adopted to monitor and reduce the impact of illumination geometry differences on the retrieved TOA reflectances. To evaluate calibration differences between the MODIS and Landsat sensors, correction for spectral response differences using a hyperspectral sensor is also demonstrated.

Conference Paper↗
USGS2007

Time-optimum packet scheduling for many-to-one routing in wireless sensor networks

This paper studies the WSN application scenario with periodical traffic from all sensors to a sink. We present a time-optimum and energy-efficient packet scheduling algorithm and its distributed implementation. We first give a general many-to-one packet scheduling algorithm for wireless networks, and then prove that it is time-optimum and costs max(2N(u1) - 1, N(u 0) -1) time slots, assuming each node reports one unit of data in each round. Here N(u0) is the total number of sensors, while N(u 1) denotes the number of sensors in a sink's largest branch subtree. With a few adjustments, we then show that our algorithm also achieves time-optimum scheduling in heterogeneous scenarios, where each sensor reports a heterogeneous amount of data in each round. Then we give a distributed implementation to let each node calculate its duty-cycle locally and maximize efficiency globally. In this packet scheduling algorithm, each node goes to sleep whenever it is not transceiving, so that the energy waste of idle listening is also eliminated. Finally, simulations are conducted to evaluate network performance using the Qualnet simulator. Among other contributions, our study also identifies the maximum reporting frequency that a deployed sensor network can handle. ??2006 IEEE.

Conference Paper↗
USGS2016

Emerging tools for continuous nutrient monitoring networks: Sensors advancing science and water resources protection

Sensors and enabling technologies are becoming increasingly important tools for water quality monitoring and associated water resource management decisions. In particular, nutrient sensors are of interest because of the well-known adverse effects of nutrient enrichment on coastal hypoxia, harmful algal blooms, and impacts to human health. Accurate and timely information on nutrient concentrations and loads is integral to strategies designed to minimize risk to humans and manage the underlying drivers of water quality impairment. Using nitrate sensors as an example, we highlight the types of applications in freshwater and coastal environments that are likely to benefit from continuous, real-time nutrient data. The concurrent emergence of new tools to integrate, manage and share large data sets is critical to the successful use of nutrient sensors and has made it possible for the field of continuous nutrient monitoring to rapidly move forward. We highlight several near-term opportunities for Federal agencies, as well as the broader scientific and management community, that will help accelerate sensor development, build and leverage sites within a national network, and develop open data standards and data management protocols that are key to realizing the benefits of a large-scale, integrated monitoring network. Investing in these opportunities will provide new information to guide management and policies designed to protect and restore our nation’s water resources.

Journal of the American Water Resources Associatio↗
USGS2023

Modeled predictions of human-associated and fecal-indicator bacteria concentrations and loadings in the Menomonee River, Wisconsin using in-situ optical sensors

Human sewage contamination of waterways is a major issue in the United States and throughout the world. Models were developed for estimation of two human-associated fecal-indicator and three general fecal-indicator bacteria (HIB and FIB) using in situ optical field-sensor data for estimating concentrations and loads of HIB and FIB and the extent of sewage contamination in the Menomonee River in Milwaukee, Wisconsin. Three commercially available optical sensor platforms were installed into an unfiltered custom-designed flow-through system along with a refrigerated automatic sampler at the Menomonee River sampling location. Ten-minute optical sensor measurements were made from November 2017 to December 2018 along with the collection of 153 flow-weighted discrete water samples (samples) for HIB, FIB, dissolved organic carbon (DOC), and optical properties of water. Of those 153 samples, 119 samples were from event-runoff periods, and 34 were collected during low-flow periods. Of the 119 event-runoff samples, 43 samples were from event-runoff combined sewer overflow (CSO) influenced periods (event-CSO periods). Models included optical sensor measurements as explanatory variables with a seasonal variable as an interaction term. In some cases, separate models for event-CSO periods and non CSO-periods generally improved model performance, as compared to using all the data combined for estimates of FIB and HIB. Therefore, the CSO and non-CSO models were used in final estimations for CSO and non-CSO time periods, respectively. Estimated continuous concentrations for all bacteria markers varied over six orders of magnitude during the study period. The greatest concentrations, loads, and proportion of sewage contamination occurred during event-runoff and event-CSO periods. Comparison to water quality standards and microbial risk assessment benchmarks indicated that estimated bacteria levels exceeded recreational water quality criteria between 34 and 96% of the entire monitoring period, highlighting the benefits of high-frequency monitoring compared to traditional grab sample collection. The application of optical sensors for estimation of HIB and FIB markers provided a thorough assessment of bacterial presence and human health risk in the Menomonee River.

Wisconsin↗
USGS2002

Calibration and temperature correction of heat dissipation matric potential sensors

This paper describes how heat dissipation sensors, used to measure soil water matric potential, were analyzed to develop a normalized calibration equation and a temperature correction method. Inference of soil matric potential depends on a correlation between the variable thermal conductance of the sensor's porous ceramic and matric potential. Although this correlation varies among sensors, we demonstrate a normalizing procedure that produces a single calibration relationship. Using sensors from three sources and different calibration methods, the normalized calibration resulted in a mean absolute error of 23% over a matric potential range of −0.01 to −35 MPa. Because the thermal conductivity of variably saturated porous media is temperature dependent, a temperature correction is required for application of heat dissipation sensors in field soils. A temperature correction procedure is outlined that reduces temperature dependent errors by 10 times, which reduces the matric potential measurement errors by more than 30%. The temperature dependence is well described by a thermal conductivity model that allows for the correction of measurements at any temperature to measurements at the calibration temperature.

Soil Science Society of America Journal↗
USGS2025

System characterization report on Resourcesat-2A Linear Imaging Self Scanning-4 sensor

Executive Summary This report documents the system characterization of the Indian Space Research Organisation Resourcesat-2A Linear Imaging Self Scanning-4 (LISS–4) sensor. It is part of a series of system characterization reports produced by the U.S. Geological Survey Earth Resources Observation and Science Cal/Val Center of Excellence. These reports describe the methodology and procedures used for characterization, present technical and operational information about the specific sensing system being evaluated, and provide a summary of test measurements, data retention practices, data analysis results, and conclusions. Resourcesat-2A was launched in 2016 on the Polar Satellite Launch Vehicle-C36; it is identical to Resourcesat-2, and together, they decrease imaging revisit time from 5 days to 2–3 days, providing data continuity and improved temporal resolution. Resouresat-2 and 2A carry the Advanced Wide Field Sensor, Linear Imaging Self Scanning-3, and LISS–4 medium-resolution imaging sensors, continuing the legacy of the Indian Space Research Organisation’s Indian Remote Sensing-1C/1D/P3 satellite programs. More information about the Indian Space Research Organisation’s satellites and sensors is available through the Joint Agency Commercial Imagery Evaluation Earth Observing Satellites Online Compendium at https://calval.cr.usgs.gov/apps/compendium/ and from the manufacturer at https://www.isro.gov.in/ . The Earth Resources Observation and Science Cal/Val Center of Excellence system characterization team assessed the geometric, radiometric, and spatial performances of the Resourcesat-2A LISS–4 sensor. Geometric performance is divided into the interior geometric performance of band-to-band registration and the exterior geometric performance of geolocation accuracy. The interior geometric performance had mean offsets in the range of −0.118 to 0.024 pixel in easting and −0.053 to 0.022 pixel in northing with root mean square error values from 0.067 to 0.230 pixel in easting and from 0.087 to 0.2 pixel in northing. The exterior geometric performance had offsets in the range of 2.55 to 7.85 meters (m) in easting and −6.15 to 11.15 m in northing with root mean square error values in the range of 2.6 to 8.2 m in easting and 6.35 to 11.8 m in northing compared to the U.S. Department of Agriculture National Agriculture Imagery Program and WorldView-3 orthoimages. The measured radiometric performance had offsets from 0.003 to 0.024 and slopes from 0.736 to 0.952, and spatial performance was in the range of 1.633 to 1.903 pixels for the full width at half maximum with a modulation transfer function at a Nyquist frequency in the range of 0.0529 to 0.0952.

Open-File Report↗
USGS2025

System characterization report on Resourcesat-2A Advanced Wide Field Sensor

Executive Summary This report documents the system characterization of the Indian Space Research Organisation Resourcesat-2A Advanced Wide Field Sensor (AWiFS) and is part of a series of system characterization reports produced by the U.S. Geological Survey Earth Resources Observation and Science Cal/Val Center of Excellence. These reports describe the methodology and procedures used for characterization, present technical and operational information about the specific sensing system being evaluated, and provide a summary of test measurements, data retention practices, data analysis results, and conclusions. Resourcesat-2A was launched in 2016 on the Polar Satellite Launch Vehicle-C36; it is identical to Resourcesat-2, and together, they decrease imaging revisit time from 5 days to 2–3 days, providing data continuity and improved temporal resolution. Resourcesat-2 and -2A carry the AWiFS, Linear Imaging Self Scanning-3, and Linear Imaging Self Scanning-4 medium-resolution imaging sensors, continuing the legacy of the Indian Space Research Organisation’s Indian Remote Sensing-1C/1D/P3 satellite programs. More information about Indian Space Research Organisation satellites and sensors is available through the Joint Agency Commercial Imagery Evaluation Earth Observing Satellites Online Compendium and from the Indian Space Research Organisation at https://www.isro.gov.in/ . The Earth Resources Observation and Science Cal/Val Center of Excellence system characterization team assessed the geometric, radiometric, and spatial performance of the Resourcesat-2A AWiFS sensor. Geometric performance is divided into the interior geometric performance of band-to-band registration and the exterior geometric performance of geolocation accuracy. The interior geometric performance had offsets in the range of −1.10 meters (m; −0.020 pixel) to 3.67 m (0.066 pixel) in easting and −5.68 m (−0.101 pixel) to 10.38 m (0.185 pixel) in northing with root mean square error values from 5.60 m (0.100 pixel) to 11.31 m (0.202 pixel) in easting and from 3.00 m (0.054 pixel) to 13.52 m (0.241 pixel) in northing. The exterior geometric performance had mean offsets of −25.29 m in easting and 16.22 m northing with root mean square error values of 26.07 m in easting and 17.60 m in northing compared to the Landsat 8 Operational Land Imager sensor. The radiometric performance had offsets from −0.002 to 0.029 and slopes from 0.733 to 1.012. Spatial performance was in the range of 1.354 to 1.639 pixels for full width at half maximum with a modulation transfer function at a Nyquist frequency in the range of 0.108 to 0.174.

Open-File Report↗
USGS2014

Terrestrial reference standard sites for postlaunch sensor calibration

In an era when the number of Earth observation satellites is rapidly growing and measurements from satellite sensors are used to address increasingly urgent global issues, often through synergistic and operational combinations of data from multiple sources, it is imperative that scientists and decision-makers are able to rely on the accuracy of Earth observation data products. The characterization and calibration of these sensors, particularly their relative biases, are vital to the success of the developing integrated Global Earth Observation System of Systems (GEOSS) for coordinated and sustained observations of the Earth. This can only reliably be achieved in the postlaunch environment through the careful use of observations by multiple sensor systems over common, well-characterized terrestrial targets (i.e., on or near the Earth's surface). Through greater access to and understanding of these vital reference standard sites and their use, the validity and utility of information gained from Earth remote sensing will continue to improve. This paper provides a brief overview of the use of reference standard sites for postlaunch sensor radiometric calibration from historical, current, and future perspectives. Emphasis is placed on optical sensors operating in the visible, near-infrared, and shortwave infrared spectral regions.

Canadian Journal of Remote Sensing↗
USGS2021

Invasive sea lamprey detection and characterization using interdigitated electrode (IDE) contact sensor

The ability to monitor invasive sea lamprey (Petromyzon marinus) populations in the Laurentian Great Lakes is critical to protecting the region’s $ 7 billion USD fishing industry and preserving its biodiversity. Monitoring these invaders requires considerable fieldwork and human power, making remote lamprey detection systems attractive for their continuous monitoring capabilities and potential for workload reduction. However, a lack of available methods for detecting sea lamprey hampers development of such systems. Here we present a sensor composed of two exposed planar interdigitated electrodes (IDE) along with a DC measurement system for the detection of lamprey attachment underwater. Measuring voltage instead of impedance, reduces cost and signal processing complexity, making the device more attractive for field deployment. The system is calibrated to a baseline output voltage and deviations from this baseline occur when objects touch the IDE. Validation was done through testing on live adult sea lampreys using video recordings to correlate lamprey attachments to the sensor response. Three response types were identified corresponding to different attachments: sustained, short and sliding-sustained. Sensor response to sustained and sliding-sustained attachments showed a characteristic exponential decay whereas the response due to short attachments was indistinguishable from measurement noise. Lamprey size was found to have a weak linear correlation with both response parameters, positive for the voltage drop and negative for the time constant of voltage drop. A representative circuit for the lamprey-sensor interaction is proposed and simulated using element values calculated from the response parameters. The response of the model shows agreement with experimental data.

Great Lakes↗
USGS2018

Challenges in complementing data from ground-based sensors with satellite-derived products to measure ecological changes in relation to climate – lessons from temperate wetland-upland landscapes

Assessing climate-related ecological changes across spatiotemporal scales meaningful to resource managers is challenging because no one method reliably produces essential data at both fine and broad scales. We recently confronted such challenges while integrating data from ground- and satellite-based sensors for an assessment of four wetland-rich study areas in the U.S. Midwest. We examined relations between temperature and precipitation and a set of variables measured on the ground at individual wetlands and another set measured via satellite sensors within surrounding 4 km 2 landscape blocks. At the block scale, we used evapotranspiration and vegetation greenness as remotely sensed proxies for water availability and to estimate seasonal photosynthetic activity. We used sensors on the ground to coincidentally measure surface-water availability and amphibian calling activity at individual wetlands within blocks. Responses of landscape blocks generally paralleled changes in conditions measured on the ground, but the latter were more dynamic, and changes in ecological conditions on the ground that were critical for biota were not always apparent in measurements of related parameters in blocks. Here, we evaluate the effectiveness of decisions and assumptions we made in applying the remotely sensed data for the assessment and the value of integrating observations across scales, sensors, and disciplines.

Sensors↗
USGS2016

Application of activity sensors for estimating behavioral patterns

The increasing use of Global Positioning System (GPS) collars in habitat selection studies provides large numbers of precise location data points with reduced field effort. However, inclusion of activity sensors in many GPS collars also grants the potential to remotely estimate behavioral state. Thus, only using GPS collars to collect location data belies their full capabilities. Coupling behavioral state with location data would allow researchers and managers to refine habitat selection models by using diel behavioral state changes to partition fine-scale temporal shifts in habitat selection. We tested the capability of relatively unsophisticated GPS-collar activity sensors to estimate behavior throughout diel periods using free-ranging female elk ( Cervus canadensis ) in the Jemez Mountains of north-central New Mexico, USA, 2013–2014. Collars recorded cumulative number of movements (hits) per 15-min recording period immediately preceding GPS fixes at 0000, 0600, 1200, and 1800 hr. We measured diel behavioral patterns of focal elk, categorizing active (i.e., foraging, traveling, vigilant, grooming) and inactive (i.e., resting) states. Active behaviors (foraging, traveling) produced more average hits (0.87 ± 0.69 hits/min, 4.0 ± 2.2 hits/min, respectively; 95% CI) and inactive (resting) behavior fewer hits (−1.1 ± 0.61 95% CI). We differentiated active and inactive behavioral states with a bootstrapped threshold of 5.9 ± 3.9 hits/15-min recording period. Mean cumulative activity-sensor hits corresponded with observed diel behavioral patterns: hits increased during crepuscular (0600, 1800 hr) observations when elk were most active (0000–0600 hr: d = 0.19; 1200–1800 hr: d = 0.64) and decreased during midday and night (0000 hr, 1200 hr) when elk were least active (1800–0000 hr: d = −0.39; 0600–1200 hr: d = −0.43). Even using relatively unsophisticated GPS-collar activity sensors, managers can remotely estimate behavioral states, approximate diel behavioral patterns, and potentially complement location data in developing habitat selection models.

New Mexico↗
USGS2019

Using maintenance records from a long-term sensor monitoring network to evaluate the relationship between maintenance schedule and data quality

Sensor-based environmental monitoring networks are beginning to provide the large-scale, long-term data required to address important fundamental and applied questions in ecology. However, the data quality from deployed sensors can be difficult and costly to ensure. In this study, we use maintenance records from the 12-year history of Louisiana’s Coastwide Reference Monitoring System (CRMS) to assess the relationship between various dimensions of data quality and the frequency of field visits to the sensors. We use hierarchical Bayesian models to estimate the probability of missing data, the probability that a corrective offset of the sensor is required, and the magnitude of required offsets for water elevation and salinity data. We compared these estimates to predetermined risk thresholds to the help identify maintenance schedules that balanced the efficient use of labor resources without sacrificing data quality. We found that the relationship between data quality and increasing maintenance interval varied across metrics. Additionally, for most metrics, the maintenance interval when the metric’s credible interval and risk threshold intersected varied throughout the year and with wetland type. These results suggest that complex maintenance schedules, in which field visits vary in frequency throughout the year and with environmental context, are likely to provide the best tradeoff between labor cost and data quality. This analysis demonstrates that quantitative assessment of maintenance records can positively impact the sustainability of long-term data collection projects by helping identify new potential efficiencies in monitoring program management.

Louisiana↗
USGS2013

Effects of suspended sediment concentration and grain size on three optical turbidity sensors

Purpose: Optical turbidity sensors have been successfully used to determine suspended sediment flux in rivers, assuming the relation between the turbidity signal and suspended sediment concentration (SSC) has been appropriately calibrated. Sediment size, shape and colour affect turbidity and are important to incorporate into the calibration process. Materials and methods: This study evaluates the effect of SSC and particle size (i.e. medium sand, fine sand, very fine sand, and fines (silt + clay)) on the sensitivity of the turbidity signal. Three different turbidity sensors were used, with photo detectors positioned at 90 and 180 degrees relative to the axis of incident light. Five different sediment ratios of sand:fines (0:100, 25:75, 50:50, 75:25 and 100:0) were also evaluated for a single SSC (1000 mg l -1 ). Results and discussion: The photo detectors positioned at 90 degrees were more sensitive than sensor positioned at 180 degrees in reading a wide variety of grain size particles. On average for the three turbidity sensors, the sensitivity for fines were 170, 40, and 4 times greater than sensitivities for medium sand, fine sand, and very fine sand, respectively. For an SSC of 1000 mg l -1 with the treatments composed of different proportions of sand and fines, the presence of sand in the mixture linearly reduced the turbidity signal. Conclusions: The results indicate that calibration of the turbidity signal should be carried out in situ and that the attenuation of the turbidity signal due to sand can be corrected, as long as the proportion of sand in the SSC can be estimated.

Journal of Soils and Sediments↗
USGS2009

Summary of current radiometric calibration coefficients for Landsat MSS, TM, ETM+, and EO-1 ALI sensors

This paper provides a summary of the current equations and rescaling factors for converting calibrated Digital Numbers (DNs) to absolute units of at-sensor spectral radiance, Top-Of-Atmosphere (TOA) reflectance, and at-sensor brightness temperature. It tabulates the necessary constants for the Multispectral Scanner (MSS), Thematic Mapper (TM), Enhanced Thematic Mapper Plus (ETM+), and Advanced Land Imager (ALI) sensors. These conversions provide a basis for standardized comparison of data in a single scene or between images acquired on different dates or by different sensors. This paper forms a needed guide for Landsat data users who now have access to the entire Landsat archive at no cost.

Remote Sensing of Environment↗
USGS2011

Coordinating standards and applications for optical water quality sensor networks

Joint USGS-CUAHSI Workshop: In Situ Optical Water Quality Sensor Networks; Shepherdstown, West Virginia, 8-10 June 2011; Advanced in situ optical water quality sensors and new techniques for data analysis hold enormous promise for advancing scientific understanding of aquatic systems through measurements of important biogeochemical parameters at the time scales over which they vary. High-frequency and real-time water quality data also provide the opportunity for early warning of water quality deterioration, trend detection, and science-based decision support. However, developing networks of optical sensors in freshwater systems that report reliable and comparable data across and between sites remains a challenge to the research and monitoring community. To address this, the U.S. Geological Survey (USGS) and the Consortium of Universities for the Advancement of Hydrologic Science, Inc. (CUAHSI), convened a 3-day workshop to explore ways to coordinate development of standards and applications for optical sensors, as well as handling, storage, and analysis of the continuous data they produce.

Conference Paper↗
USGS2025

An integrated sensor network and data driven approach to satellite remote sensing of dissolved organic matter

Traditional remote sensing retrieval models for water quality have historically relied on limited, localized data sets due to the prohibitive costs of extensive field campaigns and logistical challenges of collecting match-up data with satellite overpasses. As a result, these models often lack generalizability across seasons, tides, and sites. Furthermore, small field data sets limit the utility of modern machine learning techniques to advance remote sensing retrieval models. In situ optical sensors deployed in a sensor network to continuously monitor larger water bodies can drastically increase the number of measurements, providing the opportunity to develop new approaches for building robust remote sensing retrieval models by leveraging both remote sensing data and in situ networks as an integrated monitoring system. This study leverages a large “ground-to-space” sensor network that combines an in situ optical sensor network with satellite-based remote sensing to overcome these limitations. Utilizing a large-scale data set from the U.S. Geological Survey's Sacramento—San Joaquin River Delta monitoring network, of dissolved organic matter fluorescence measurements, and remote sensing data from the European Space Agency's Sentinel-2A and -2B satellites, this study implemented a data driven approach for dissolved organic matter models. The data set, consisting of 982 samples collected between 2018 and 2021 was used to train and validate a random forest model ( R 2 = 0.76, RMSE = 6.1 Quinine Sulfate Equivalents), with demonstrated applicability across diverse site conditions, tidal stages, and seasons. This work provides a scalable solution to address critical challenges in water quality monitoring and offers a replicable framework for global water quality management.

Calfornia↗
USGS2010

Surface phenology and satellite sensor-derived onset of greenness: An initial comparison

The objective of this work was to document the utility of phenological data derived from satellite sensors by comparing them with modelled phenology. Surface phenological model outputs (first leaf and first bloom dates) were correlated positively with satellite sensor-derived start of season (SOS) dates for 1991-1995 across the eastern United States. The correlation was highest for forest (r 0.62 for deciduous trees and 0.64 for mixed woodland) and tall grass (r 0.46) and lowest for short grass (r 0.37). The average correlation over all land cover types was 0.61. Average SOS dates were consistently earlier than Spring Index dates across all land cover types. This finding and limited native tree phenology data suggest that the SOS technique detects understorey green-up in the forest rather than overstorey species. The biweekly temporal resolution of the satellite sensor data placed an upper limit on prediction accuracy; thus, year-to-year variations at individual sites were typically small. Nevertheless, the correct biweek SOS could be identified from the surface models 61% of the time, and 1 biweek 96% of the time. Further temporal refinement of the satellite sensor measurements is necessary in order to connect them with surface phenology adequately and to develop links among 'green wave' components in selected biomes.

International Journal of Remote Sensing↗