SEARCH · Search USGS

Results for “Input”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4Linked to original sources

USGS2004

Historical trends in occurrence and atmospheric inputs of halogenated volatile organic compounds in untreated ground water used as a source of drinking water

Analyses of samples of untreated ground water from 413 community-, non-community- (such as restaurants), and domestic-supply wells throughout the US were used to determine the frequency of detection of halogenated volatile organic compounds (VOCs) in drinking-water sources. The VOC data were compiled from archived chromatograms of samples analyzed originally for chlorofluorocarbons (CFCs) by purge-and-trap gas chromatography with an electron-capture detector (GC-ECD). Concentrations of the VOCs could not be ascertained because standards were not routinely analyzed for VOCs other than trichloromonofluoromethane (CFC-11), dichlorodifluoromethane (CFC-12) and 1,1,2-trichloro-1,2,2-trifluoroethane (CFC-113). Nevertheless, the peak areas associated with the elution times of other VOCs on the chromatograms can be classified qualitatively to assess concentrations at a detection limit on the order of parts per quadrillion. Three or more VOCs were detected in 100% (percent) of the chromatograms, and 77.2% of the samples contained 10 or more VOCs. The maximum number of VOCs detected in any sample was 24. Modeled ground-water residence times, determined from concentrations of CFC-12, were used to assess historical trends in the cumulative occurrence of all VOCs detected in this analysis, as well as the occurrence of individual VOCs, such as CFC-11, carbon tetrachloride (CCl 4 ), chloroform and tetrachloroethene (PCE). The detection frequency for all of the VOCs detected has remained relatively constant from approximately 1940 to 2000; however, the magnitude of the peak areas on the chromatograms for the VOCs in the water samples has increased from 1940 to 2000. For CFC-11, CCl 4 , chloroform and PCE, small peaks decrease from 1940 to 2000, and large peaks increase from 1940 to 2000. The increase in peak areas on the chromatograms from analyses of more recently recharged water is consistent with reported increases in atmospheric concentrations of the VOCs. Approximately 44% and 6.7% of the CCl 4 and PCE detections, respectively, in pre-1940 water, and 68% and 62% of the CCl 4 and PCE detections, respectively, in water recharged in 2000 exceed solubility equilibrium with average atmospheric concentrations. These exceedences can be attributed to local atmospheric enrichment or direct contaminant input to ground-water flow systems. The detection of VOCs at concentrations indicative of atmospheric sources in 100% of the samples indicates that untreated drinking water from ground-water sources in the US recharged within the past 60 years has been affected by anthropogenic activity. Additional inputs from a variety of sources such as spills, underground injections and leaking landfills or storage tanks increasingly are providing additional sources of contamination to ground water used as drinking-water sources.

Science of the Total Environment↗

USGS2016

Effect of variable annual precipitation and nutrient input on nitrogen and phosphorus transport from two Midwestern agricultural watersheds

Precipitation patterns and nutrient inputs affect transport of nitrate (NO 3 -N) and phosphorus (TP) from Midwest watersheds. Nutrient concentrations and yields from two subsurface-drained watersheds, the Little Cobb River (LCR) in southern Minnesota and the South Fork Iowa River (SFIR) in northern Iowa, were evaluated during 1996–2007 to document relative differences in timings and amounts of nutrients transported. Both watersheds are located in the prairie pothole region, but the SFIR exhibits a longer growing season and more livestock production. The SFIR yielded significantly more NO 3 -N than the LCR watershed (31.2 versus 21.3 kg NO 3 -N ha − 1 y − 1 ). The SFIR watershed also yielded more TP than the LCR watershed (1.13 versus 0.51 kg TP ha − 1 yr − 1 ), despite greater TP concentrations in the LCR. About 65% of NO 3 -N and 50% of TP loads were transported during April–June, and < 20% of the annual loads were transported later in the growing season from July–September. Monthly NO 3 -N and TP loads peaked in April from the LCR but peaked in June from the SFIR; this difference was attributed to greater snowmelt runoff in the LCR. The annual NO 3 -N yield increased with increasing annual runoff at a similar rate in both watersheds, but the LCR watershed yielded less annual NO 3 -N than the SFIR for a similar annual runoff. These two watersheds are within 150 km of one another and have similar dominant agricultural systems, but differences in climate and cropping inputs affected amounts and timing of nutrient transport.

Science of the Total Environment↗

USGS1999

PAH refractory index as a source discriminant of hydrocarbon input from crude oil and coal in Prince William Sound, Alaska

Geochemical correlation and differentiation of hydrocarbons from crude oils and coals is difficult. The complex mixture of the hydrocarbon constituents and the dynamic nature of these constituents in the environment as they weather contribute to this difficulty A new parameter, the polycyclic aromatic hydrocarbon (PAH) refractory index, is defined here to help in this correlation. The PAH refractory index is a ratio of two of the most refractory constituents of most crude oils, namely triaromatic steranes and monomethylchrysenes. These are among the most persistent compounds in oil after deposition in the environment and thus retain reliably the signature of the original petroleum input. This index is utilized in Prince William Sound (PWS) to differentiate three different oils, as well as to provide evidence that coal, not oil, is the dominant source of the PAHs which are prominent constituents of marine sediments from PWS and the Gulf of Alaska.Geochemical correlation and differentiation of hydrocarbons from crude oils and coals is difficult. The complex mixture of the hydrocarbon constituents and the dynamic nature of these constituents in the environment as they weather contribute to this difficulty. A new parameter, the polycyclic aromatic hydrocarbon (PAH) refractory index, is defined here to help in this correlation. The PAH refractory index is a ratio of two of the most refractory constituents of most crude oils, namely triaromatic steranes and monomethylchrysenes. These are among the most persistent compounds in oil after deposition in the environment and thus retain reliably the signature of the original petroleum input. This index is utilized in Prince William Sound (PWS) to differentiate three different oils, as well as to provide evidence that coal, not oil, is the dominant source of the PAHs which are prominent constituents of marine sediments from PWS and the Gulf of Alaska.

Conference Paper↗

USGS2020

Occurrence and spatiotemporal dynamics of pharmaceuticals in a temperate-region wastewater effluent-dominated stream: Variable inputs and differential attenuation yield evolving complex exposure mixtures

Effluent-dominated streams are becoming increasingly common in temperate regions and generate complex pharmaceutical mixture exposure conditions that may impact aquatic organisms via drug–drug interactions. Here, we quantified spatiotemporal pharmaceutical exposure concentrations and composition mixture dynamics during baseflow conditions at four sites in a temperate-region effluent-dominated stream (upstream, at, and progressively downstream from effluent discharge). Samples were analyzed monthly for 1 year for 109 pharmaceuticals/degradates using a comprehensive U.S. Geological Survey analytical method and biweekly for 2 years focused on 14 most common pharmaceuticals/degradates. We observed a strong chemical gradient with pharmaceuticals only sporadically detected upstream from the effluent. Seventy-four individual pharmaceuticals/degradates were detected, spanning 5 orders of magnitude from 0.28 to 13 500 ng/L, with 38 compounds detected in >50% of samples. “Biweekly” compounds represented 77 ± 8% of the overall pharmaceutical concentration. The antidiabetic drug metformin consistently had the highest concentration with limited in-stream attenuation. The antihistamine drug fexofenadine inputs were greater during warm- than cool-season conditions but also attenuated faster. Differential attenuation of individual pharmaceuticals (i.e., high = citalopram; low = metformin) contributed to complex mixture evolution along the stream reach. This research demonstrates that variable inputs over multiple years and differential in-stream attenuation of individual compounds generate evolving complex mixture exposure conditions for biota, with implications for interactive effects.

Environmental Science & Technology↗

USGS2024

Using a time-of-travel sampling approach to quantify per- and polyfluoroalkyl substances (PFAS) stream loading and source inputs in a mixed-source, urban catchment

Understanding per- and polyfluoroalkyl substances (PFAS) mass distribution in surface and groundwater systems can support source prioritization, load reduction, and water management. Thirteen sites within an urban catchment were sampled utilizing a time-of-travel sampling approach to minimize the influence of subdaily fluctuations in mass from PFAS point sources and to quantify PFAS and ancillary chemical loads from various PFAS sources. A larger increase in perfluoroalkyl sulfonate (PFSA) loads (8 to 11 μg/s, up to 618%) than in perfluoroalkyl carboxylate (PFCA) loads (no change to 3.4 μg/s, up to 122%) was observed at sites below tributaries influenced by military bases with known groundwater discharge. Point discharges from two sewage treatment plants (STPs) resulted in increases in PFCA and PFSA loads that were similar (6 and 10 μg/s respectively) below the first STP and greater for PFCA compared to PFSA loads (23 and 13 μg/s respectively) below the second STP. Overall, percent increases in total PFAS load ranged from 20 to 277% for military base inputs and 44 to 77% for STP inputs. A focus catchment that represents only 14% (76.9 km 2 ) of the drainage area at the most downstream site (544 km 2 ) accounted for about 70% of PFSA and 40% of PFCA loads observed at the most downstream site. Results show that by using a time-of-travel sampling approach in mixed, urban settings with several PFAS sources, it is possible to quantify stream loads from individual PFAS sources, thereby improving source attribution and providing actionable data for water-resource managers.

ACS ES&T Water↗

USGS2007

Geochemical evidence for African dust inputs to soils of western Atlantic islands: Barbados, the Bahamas, and Florida

We studied soils on high-purity limestones of Quaternary age on the western Atlantic Ocean islands of Barbados, the Florida Keys, and the Bahamas. Potential soil parent materials in this region, external to the carbonate substrate, include volcanic ash from the island of St. Vincent (near Barbados), volcanic ash from the islands of Dominica and St. Lucia (somewhat farther from Barbados), the fine-grained component of distal loess from the lower Mississippi River Valley, and wind-transported dust from Africa. These four parent materials can be differentiated using trace elements (Sc, Cr, Th, and Zr) and rare earth elements that have minimal mobility in the soil-forming environment. Barbados soils have compositions that indicate a complex derivation. Volcanic ash from the island of St. Vincent appears to have been the most important influence, but African dust is a significant contributor, and even Mississippi River valley loess may be a very minor contributor to Barbados soils. Soils on the Florida Keys and islands in the Bahamas appear to have developed mostly from African dust, but Mississippi River valley loess may be a significant contributor. Our results indicate that inputs of African dust are more important to the genesis of soils on islands in the western Atlantic Ocean than previously supposed. We hypothesize that African dust may also be a major contributor to soils on other islands of the Caribbean and to soils in northern South America, central America, Mexico, and the southeastern United States. Dust inputs to subtropical and tropical soils in this region increase both nutrient-holding capacity and nutrient status and thus may be critical in sustaining vegetation. Copyright 2007 by the American Geophysical Union.

Journal of Geophysical Research F: Earth Surface↗

USGS2011

Estimating unknown input parameters when implementing the NGA ground-motion prediction equations in engineering practice

The ground-motion prediction equations (GMPEs) developed as part of the Next Generation Attenuation of Ground Motions (NGA-West) project in 2008 are becoming widely used in seismic hazard analyses. However, these new models are considerably more complicated than previous GMPEs, and they require several more input parameters. When employing the NGA models, users routinely face situations in which some of the required input parameters are unknown. In this paper, we present a framework for estimating the unknown source, path, and site parameters when implementing the NGA models in engineering practice, and we derive geometrically-based equations relating the three distance measures found in the NGA models. Our intent is for the content of this paper not only to make the NGA models more accessible, but also to help with the implementation of other present or future GMPEs.

Earthquake Spectra↗

USGS2024

Geologic input databases for the 2025 Puerto Rico – U.S. Virgin Islands National Seismic Hazard Model update: Crustal faults component

The last National Seismic Hazard Model (NSHM) for Puerto Rico and the U.S. Virgin Islands (PRVI) was published in 2003. In advance of the 2025 PRVI NSHM update, we created three geologic input databases to summarize new onshore and offshore fault source information in the northern Caribbean region between 62°–70° W and 16°–21° N. These databases, of fault sections, fault‐zone polygons, and geologic estimates of fault activity (fault‐slip rate and earthquake recurrence intervals) at specific sites, document updates to fault parameters used in prior seismic hazard models in PRVI. Fault sources were reviewed from published studies since 2003, which document substantial changes to the understanding of fault location, geometry, or activity. New fault section sources were added for features that meet the criteria of (1) length ≥7 km, (2) unequivocal evidence of recurrent tectonic Quaternary activity, and (3) documentation that is publicly available in a peer‐reviewed source. In addition, we revised several broad areal sources, such as the Mona and Anegada extensional zones. The 2003 model included three fault sections and two fault‐zone polygons (areal sources). These databases include 35 fault sections, 6 fault‐zone polygons, and 51 earthquake geology sites. To characterize fault activity rates, slip‐rate bins were assigned based on landscape expression and paleoseismic trench observations for faults without published slip‐rate sites. Additional fault sources were evaluated but not included in these databases due to a lack of published information about fault location, geometry, or recurrent Quaternary activity. The PRVI NSHM 2025 geologic input databases describe crustal faulting; the geometries and coupling of Puerto Rico subduction zone and Muertos Trough models are considered in a separate database. Updates to the fault sections, fault‐zone polygons, and earthquake geology databases can help inform the location and recurrence rate of damaging earthquakes in the PRVI NSHM implementation.

Puerto Rico, U.S. Virgin Islands↗

USGS2013

Macroinvertebrate diets reflect tributary inputs and turbidity-driven changes in food availability in the Colorado River downstream of Glen Canyon Dam

Physical changes to rivers associated with large dams (e.g., water temperature) directly alter macroinvertebrate assemblages. Large dams also may indirectly alter these assemblages by changing the food resources available to support macroinvertebrate production. We examined the diets of the 4 most common macroinvertebrate taxa in the Colorado River through Glen and Grand Canyons, seasonally, at 6 sites for 2.5 y. We compared macroinvertebrate diet composition to the composition of epilithon (rock and cliff faces) communities and suspended organic seston to evaluate the degree to which macroinvertebrate diets tracked downstream changes in resource availability. Diets contained greater proportions of algal resources in the tailwater of Glen Canyon Dam and more terrestrial-based resources at sites downstream of the 1st major tributary. As predicted, macroinvertebrate diets tracked turbidity-driven changes in resource availability, and river turbidity partially explained variability in macroinvertebrate diets. The relative proportions of resources assimilated by macroinvertebrates ranged from dominance by algae to terrestrial-based resources, despite greater assimilation efficiencies for algal than terrestrial C. Terrestrial resources were most important during high turbidity conditions, which occurred during the late-summer monsoon season (July–October) when tributaries contributed large amounts of organic matter to the mainstem and suspended sediments reduced algal production. Macroinvertebrate diets were influenced by seasonal changes in tributary inputs and turbidity, a result suggesting macroinvertebrate diets in regulated rivers may be temporally dynamic and driven by tributary inputs.

Arizona↗

USGS2002

A data input program (MFI2K) for the U.S. Geological Survey modular ground-water model (MODFLOW-2000)

MFI2K is a data-input (entry) program for the U.S. Geological Survey modular three-dimensional finite-difference ground-water model, MODFLOW-2000. MFI2K runs on personal computers. MFI2K supports the solute transport and parameter-estimation capabilities that are incorporated in MODFLOW-2000. Data for MODPATH, a particle-tracking program for use with MODFLOW-2000, also can be entered using MFI2K. MFI2K is designed to be easy to use; data are entered interactively through a series of display screens. MFI2K also can be used in conjunction with other data-input programs so that the different parts of a model dataset can be entered using the most suitable program. MFI2K interfaces to an external program for entering or editing two-dimensional arrays and lists of stress data. This report provides instructions for using MFI2K.

Open-File Report↗

USGS2004

Digital data used to relate nutrient inputs to water quality in the Chesapeake Bay watershed, version 3.0

Chesapeake Bay restoration efforts are focused on improving water quality, living resources, and ecological habitats by 2010. One aspect of the water-quality restoration is the refinement of strategies designed to implement nutrient-reduction practices within the Bay watershed. These strategies are being refined and implemented by resource managers of the Chesapeake Bay Program (CBP), a partnership comprised of various Federal, State, and local agencies that includes jurisdictions within Delaware, Maryland, New York, Pennsylvania, Virginia, West Virginia, and the District of Columbia. The U.S. Geological Survey (USGS), an active member of the CBP, provides necessary water-quality information for these Chesapeake Bay nutrient-reduction strategy revisions and evaluations. The formulation and revision of effective nutrient-reduction strategies requires detailed scientific information and an analytical understanding of the sources, transport, and delivery of nutrients to the Chesapeake Bay. The USGS is supporting these strategies by providing scientific information to resource managers that can help them evaluate and understand these processes. One statistical model available to resource managers is a collection of SPAtially Referenced Regressions On Watershed (SPARROW) attributes, which uses a nonlinear regression approach to spatially relate nutrient sources and watershed characteristics to nutrient loads of streams throughout the Chesapeake Bay watershed. Developed by the USGS, information generated by SPARROW can help resource managers determine the geographical distribution and relative contribution of nutrient sources and the factors that affect their transport to the Bay. Nutrient source information representing the late 1990s time period was obtained from several agencies and used to create and compile digital spatial datasets of total nitrogen and total phosphorus contributions that served as input sources to the SPARROW models. These data represent atmospheric deposition, point-source locations, land-use, land-cover, and agricultural sources such as commercial fertilizer and manure applications. Watershed-characteristics datasets representing factors that affect the transport of nutrients also were compiled from previous applications of the SPARROW models in the Chesapeake Bay watershed. Datasets include average-annual precipitation and temperature, slope, soil permeability, and hydrogeomorphic regions. Nutrient-input and watershed-characteristics datasets representing conditions during the late 1990s were merged with a connected network of stream reaches and watersheds to provide the spatial detail required by SPARROW. Stream-nutrient load estimates for 125 sampling sites (87 for total nitrogen and 103 for total phosphorus) served as the dependent variables for the regressions, and were used to calibrate models of total nitrogen and total phosphorus depicting late 1990s conditions in the Chesapeake Bay watershed. Spatial data generated for the models can be used to identify the location of nutrient sources, while the models' nutrient estimates can be used to evaluate stream-nutrient load contributed locally by each source evaluated, the amount of local load generated that is transported to the Bay, and the factors that affect the nutrient transport. Applying the SPARROW methodology to late 1990s information completes three time periods (late 1980s, early 1990s, and late 1990s) of viable data that resource managers can use to evaluate the water-quality conditions within the Bay watershed in order to refine restoration goals and nutrient-reduction strategies.

Chesapeake Bay watershed↗

USGS2011

A data-input program (MFI2005) for the U.S. Geological Survey modular groundwater model (MODFLOW-2005) and parameter estimation program (UCODE_2005)

The MFI2005 data-input (entry) program was developed for use with the U.S. Geological Survey modular three-dimensional finite-difference groundwater model, MODFLOW-2005. MFI2005 runs on personal computers and is designed to be easy to use; data are entered interactively through a series of display screens. MFI2005 supports parameter estimation using the UCODE_2005 program for parameter estimation. Data for MODPATH, a particle-tracking program for use with MODFLOW-2005, also can be entered using MFI2005. MFI2005 can be used in conjunction with other data-input programs so that the different parts of a model dataset can be entered by using the most suitable program.

Open-File Report↗

USGS2010

User's guide for MAGIC-Meteorologic and hydrologic genscn (generate scenarios) input converter

Meteorologic and hydrologic data used in watershed modeling studies are collected by various agencies and organizations, and stored in various formats. Data may be in a raw, un-processed format with little or no quality control, or may be checked for validity before being made available. Flood-simulation systems require data in near real-time so that adequate flood warnings can be made. Additionally, forecasted data are needed to operate flood-control structures to potentially mitigate flood damages. Because real-time data are of a provisional nature, missing data may need to be estimated for use in floodsimulation systems. The Meteorologic and Hydrologic GenScn (Generate Scenarios) Input Converter (MAGIC) can be used to convert data from selected formats into the Hydrologic Simulation System-Fortran hourly-observations format for input to a Watershed Data Management database, for use in hydrologic modeling studies. MAGIC also can reformat the data to the Full Equations model time-series format, for use in hydraulic modeling studies. Examples of the application of MAGIC for use in the flood-simulation system for Salt Creek in northeastern Illinois are presented in this report.

Open-File Report↗

USGS2013

Sediment geochemistry of Corte Madera Marsh, San Francisco Bay, California: have local inputs changed, 1830-2010?

Large perturbations since the mid-1800s to the supply and source of sediment entering San Francisco Bay have disturbed natural processes for more than 150 years. Only recently have sediment inputs through the Sacramento-San Joaquin Delta (the Delta) decreased to what might be considered pre-disturbance levels. Declining sediment inputs to San Francisco Bay raise concern about continued tidal marsh accretion, particularly if sea level rise accelerates in the future. The aim of this study is to explore whether the relative amount of local-watershed sediment accumulating in a tidal marsh has changed as sediment supply from the Sacramento-San Joaquin Rivers has decreased. To address this question, sediment geochemical indicators, or signatures, in the fine fraction (silt and clay) of Sacramento River, San Joaquin River, San Francisco Bay, and Corte Madera Creek sediment were identified and applied in sediment recovered from Corte Madera Marsh, one of the few remaining natural marshes in San Francisco Bay. Total major, minor, trace, and rare earth element (REE) contents of fine sediment were determined by inductively coupled plasma mass and atomic emission spectroscopy. Fine sediment from potential source areas had the following geochemical signatures: Sacramento River sediment downstream of the confluence of the American River was characterized by enrichments in chromium, zirconium, and heavy REE; San Joaquin River sediment at Vernalis and Lathrop was characterized by enrichments in thorium and total REE content; Corte Madera Creek sediment had elevated nickel contents; and the composition of San Francisco Bay mud proximal to Corte Madera Marsh was intermediate between these sources. Most sediment geochemical signatures were relatively invariant for more than 150 years, suggesting that the composition of fine sediment in Corte Madera Marsh is not very sensitive to changes in the magnitude, timing, or source of sediment entering San Francisco Bay through the Delta. Nor does there appear to be a ubiquitous increase in the proportion of fine sediment from Corte Madera watershed accumulating in the marsh during the last 20 years when sediment inflows through the Delta have decreased to pre-disturbance levels. We conclude that a large, well-mixed reservoir, such as the transportable fine sediment pool in San Francisco Bay, is the primary source of sediment to Corte Madera Marsh, and this source buffers the marsh against changes in sediment supply from the Delta and local watersheds. This study also found that Corte Madera Marsh sediment between about 10-30 centimeters depth is highly contaminated with lead, likely a legacy of lead smelter operations near Carquinez Strait and leaded gasoline use.

California↗

USGS2025

Methodology and technical input for the 2025 U.S. List of Critical Minerals—Assessing the potential effects of mineral commodity supply chain disruptions on the U.S. economy

The Secretary of the Interior, acting through the Director of the U.S. Geological Survey, is tasked by section 7002 (“Mineral Security”) of title VII (“Critical Minerals”) of the Energy Act of 2020 (Public Law 116–260, December 27, 2020, 116th Congress) with reviewing and revising the methodology used to evaluate mineral commodity supply risk and the U.S. List of Critical Minerals (LCM) no less than every 3 years. Following two previous LCM assessments, this analysis represents the latest technical input for evaluating each mineral commodity’s supply risk and determining their recommended status on the LCM. We evaluated mineral commodity supply risk using two criteria: (1) an economic effects assessment that quantified the potential effects of various trade disruption scenarios on the U.S. economy, and (2) an examination of whether the mineral commodity’s U.S. supply chain relied on a sole domestic producer that represented a single point of failure. For the first criterion, postdisruption equilibrium quantities and prices for each mineral commodity were calculated based on their price elasticities of supply and demand and the availability of excess production capacity for each yearlong foreign trade disruption scenario. Subsequently, a nonlinear optimization routine was used with detailed economic input-output tables to estimate the potential economic effects on the U.S. economy of over 1,200 scenarios for 84 mineral commodities. After accounting for the probability of each scenario’s occurrence, the overall results are presented in terms of changes in U.S. gross domestic product (GDP) by individual industry and the economy overall. The results, which ranged from a net decrease in U.S. GDP of nearly $4.5 billion to a net increase of $33 million, largely reflect U.S. import dependency and world production concentration. Using the Jenks natural breaks optimization method, a statistical classification technique, we categorized the mineral commodities into several classes based on this overall risk quantification. Mineral commodities with annualized probability-weighted net decreases in U.S. GDP greater than $2 million were recommended for inclusion on the LCM. If a mineral commodity did not meet the threshold for inclusion on the LCM under the first criterion, its domestic supply chain was examined under the second criterion, which recommended a mineral commodity for inclusion on the LCM if there was only a single domestic producer. Ultimately, the two criteria resulted in the recommendation of the addition of six mineral commodities (in descending risk order, potash, silicon, copper, silver, rhenium, and lead) to and the removal of two mineral commodities (arsenic and tellurium) from the LCM. By using an economic effects assessment, the results of this analysis provide a prioritization that can also be compared directly against other risk analyses and the cost of various risk mitigation strategies.

Open-File Report↗

USGS1996

Documentation of model input and output values for simulation of pumping effects in Paradise Valley, a basin tributary to the Humboldt River, Humboldt County, Nevada

Documentation is provided of model input and sample output used in a previous report for analysis of ground-water flow and simulated pumping scenarios in Paradise Valley, Humboldt County, Nevada.Documentation includes files containing input values and listings of sample output. The files, in American International Standard Code for Information Interchange (ASCII) or binary format, are compressed and put on a 3-1/2-inch diskette. The decompressed files require approximately 8.4 megabytes of disk space on an International Business Machine (IBM)- compatible microcomputer using the MicroSoft Disk Operating System (MS-DOS) operating system version 5.0 or greater.

Open-File Report↗

USGS1994

Documentation of Model Input and Output Values Used for Analyses of Simulated Development in Stagecoac Valley, Lyon and Storey Counties, Western Nevada

A previously published Geological Survey report (Professional Paper 1409-H) describes ground-water flow and simulated development scenarios in Stagecoach Valley, Lyon and Storey Counties, Nevada. This study was done as part of the Survey's Great Basin Regional Aquifer-Systems Analysis program. Documentation of model input and output values used for analysis of ground-water flow and simulated development scenarios in Stagecoach Valley, Lyon and Storey Counties, in western Nevada, has not been published previously. In this report, the documen- tation, consisting of a listing of input values and sample output, is contained on a 5-1/4-inch diskette in files presented according to the American International Standard Code for Information Inter- change (ASCII) format. These files require approxi- mately 760,000 bytes of disk space on an IBM- compatible microcomputer using the MS-DOS operating system.

Open-File Report↗

USGS1993

Documentation of model input and output values for simulation of regional ground-water flow, carbonate-rock province, Nevada, Utah, and adjacent states

Documentation of model input values and sample output used during a conceptual evaluation of the regional ground-water flow in the carbonate-rock province of the Great Basin, Nevada, Utah, and adjacent states, was revised from previously published Open-File Report 91-479. The documentation, consisting of a listing of input values and sample output, is contained on a 5-1/4-inch diskette in files presented in American Standard Code for Information Interchange (ASCII) format. These files require approximately 740,000 bytes of disk space on an IBM-compatible microcomputer using the MS-DOS operating system.

Nevada, Utah↗