Search USGS⌕ Search

SEARCH · Search USGS

Results for “Rock Products”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38Linked to original sources
USGS2011

Biomarker chemistry and flux quantification methods for natural petroleum seeps and produced oils, offshore southern California

Sustained, natural oil seepage from the seafloor is common off southern California, and is of great interest to resource managers, who are tasked with distinguishing natural from anthropogenic oil sources. The major purpose of this study was to build upon the work previously funded by the Bureau of Ocean Energy Management (BOEM) and the U.S. Geological Survey (USGS) that has refined the oil-fingerprinting process to enable differentiation of the highly similar Monterey Formation oils from Outer Continental Shelf (OCS) production and adjacent natural seeps. In these initial studies, biomarker and stable carbon isotope ratios were used to infer the age, lithology, organic-matter input, and depositional environment of the source rocks for 388 samples of produced crude oil, seep oil, and tarballs mainly from coastal California. The analysis resulted in a predictive model of oil source families that could be applied to samples of unknown origin.

California↗
USGS1993

Factors affecting the geochemistry of a thick, subbituminous coal bed in the Powder River Basin: Volcanic, detrital, and peat-forming processes

The inorganic geochemistry and mineralogy of three cores from the Anderson-Dietz 1 coal bed, a 15.2-m-thick subbituminous coal bed in the Tongue River Member (Paleocene) of the Fort Union Formation, were examined (1) to determine if the cores could be correlated by geochemical composition alone over a total distance of 2 km and (2) to identify the major factors that influenced the geochemistry of the coal bed. Chemical data (46 elements on a coal-ash basis) for 81 coal samples and 4 carbonaceous rock samples, with most samples representing a 0.6-m-thick (2-ft) interval of core, were grouped into compositional clusters by means of cluster analysis. Seven major clusters were produced; two of these clusters can be used to correlate the coal bed throughout the study area. Data from scanning electron and optical microscope analyses indicate that several factors influenced the geochemistry of the Anderson-Dietz 1 coal bed. The majority of mineral grains in the coal bed are interpreted to be detrital (water borne); evidence includes the presence of rounded to subrounded quartz grains having two-phase, aqueous fluid inclusions characteristic of hydrothermal or low-to-moderate grade metamorphic quartz. These quartz grains are found throughout the coal bed but are most abundant in samples from the midpart of the bed, which was influenced by detrital input associated with the deposition of the clastic rocks that form the split between the Anderson and Dietz 1 coal beds 900 m to the east of the study area. In addition to the detrital minerals mentioned above, volcanic ash that was fluvially transported to the sites of peat deposition or possibly deposited as air-fall volcanic ash also affected the geochemistry of the coal bed. For example, crandallite(?), a mineral reported to form as an alteration product of volcanic ash, is found in seven samples from the coal bed. The presence of quartz grains containing silicate-melt inclusions in eight samples from the coal bed.provides further support for a volcanic ash component. Other factors that probably affected the geochemistry of the coal bed include (1) detrital input associated with the deposition of the roof rocks of the coal bed, (2) peat-forming processes and plant material, and (3) epigenetic ground-water flow.

Montana, Wyoming↗
USGS2005

Hydrogeology and simulation of source areas of water to production wells in a colluvium-mantled carbonate-bedrock aquifer near Shippensburg, Cumberland and Franklin Counties, Pennsylvania

This report presents the results of a study by the U.S. Geological Survey in cooperation with the Shippensburg Borough Authority to evaluate the source areas of water to production wells in a colluvium-mantled carbonate-bedrock aquifer in Cumberland and Franklin Counties, Pa. The areal extent of the zone of contribution was simulated for three production wells near Shippensburg, Pa. by use of a ground-water-flow model. A 111-square-mile area was selected as the model area and includes areas of the South Mountain Section and the Great Valley Section of the Valley and Ridge Physiographic Province. Within the model area, the geologic units in the South Mountain area are predominantly metamorphic rocks and the geologic units in the Great Valley are predominantly carbonate rocks. Hydrologic and geologic information were compiled to establish a conceptual model of ground-water flow. Characteristics of aquifer materials were determined, and streamflow and water levels were measured. Streamflow measurements in November 2003 showed all streams lost water as they flowed from South Mountain over the colluvium-mantled carbonate aquifer into the Great Valley. Some streams lost more than 1 cubic foot per second to the aquifer in this area. The Shippensburg Borough Authority owns three production wells in the model area. Two wells, Cu 969 and Fr 823, are currently (2004) used as production wells and produce 500,000 and 800,000 gallons per day, respectively. Well Cu 970 is intended to be brought on line as a production well in the future. Water levels were measured in 43 wells to use for model calibration. Water-level fluctuations and geophysical logs indicated confined conditions in well Cu 970. Ground-water flow was simulated with a model that consisted of two vertical layers, with five zones in each layer. The units were hydrostratigraphic units that initially were based on geologic formations, but boundaries were adjusted during model calibration. Model calibration resulted in a root mean square error of 9.8 feet. A parameter-estimation package was used during model calibration to estimate three parameters. The parameter estimation resulted in a value of 233 feet per day for horizontal hydraulic conductivity of the highly fractured carbonate rocks and sandy colluvium in layer 1; 3.97 feet per day for horizontal hydraulic conductivity of the ridge-forming unit in layer 1; and a value of 1.73 for horizontal anisotropy in both layers. The calibrated model was used to delineate the areal extent of the zone of contribution for wells Cu 969 and Fr 823. Although well Cu 970 is not currently (2004) being used, the areal extent of its zone of contribution also was simulated without additional model calibration. The shape of the areal extent of the zone of contribution was similar for each well and included an area that extended from the well southwest along the Tomstown Formation, and then extended southeast into the metamorphic rocks of South Mountain. The contributing areas from the watersheds of losing streams were also delineated because losing stream reaches bisect the areal extent of the zones of contribution. Spatial uncertainty of the areal extent of the zone of contribution was illustrated using a Monte-Carlo analysis. The model was run 1,000 times using randomly generated parameter sets that were normally distributed within the confidence interval around the optimal values for the three estimated parameters. The model converged and had a reasonable water budget for 980 of the model runs. For each of those 980 model runs, the recharge area was determined, and the results for all runs were compiled and contoured. The results of the Monte-Carlo analysis were compared to the results of the deterministic model, illustrating that the deterministic model has the greatest certainty in the area closest to each well in the Tomstown Formation. The areas farther from the well, upgradient, and in the metamorphic rocks have a higher degree

Pennsylvania↗
USGS1976

Ground water in the Harrisburg-Halsey area, southern Willamette Valley, Oregon

The Harrisburg-Halsey area lies between the Cascade and Coast Ranges in the southern Willamette Valley in northwestern Oregon. The area consists of approximately 350 square miles (910 km 2 ) and includes a part of the lower foothills of the Coast and Cascade Ranges. Volcanic and marine sedimentary units exposed in the foothills range in age from Eocene to Miocene. The volcanic rocks are primarily of dacitic and andesitic composition and yield only small quantities of water that are generally adequate only for domestic and stock use. The alluvial deposits (sand and gravel) of the valley plain contain the more productive aquifers in the area and yield most of the water that is pumped from wells in the area. Aquifers in the area are recharged principally by direct infiltration of precipitation. Most of the precipitation, which averages about 40 in. (1,020 mm) per year occurs during late autumn and winter. During 1974 the seasonal decline of water levels from winter to late summer averaged about 10 ft 13 m) for the alluvial deposits. The seasonal change of storage for 1974 was estimated to be about 170,000 acre-ft (210 hm3). Of this volume, about 14,300 acre-ft (17.6 hm 3 ) was pumped from wells; the rest, about 156,000 acre-ft (190 hm 3 ), was discharged naturally by seepage and spring flow to streams and by evapotranspiration. The difference between pumpage and natural discharge indicates that a large quantity of additional water is available for development. The storage capacity of the alluvial aquifers is estimated to be about 800,000 acre-ft (1,000 hm 3 ) in the zone 10-100 ft (3-30 m} below land surface. Ground water from the alluvial deposits is chemically suitable for irrigation and other uses, as is most of the water obtained from perched-water bodies in the older sedimentary and volcanic rocks. However, the mineral concentration of water from the older sedimentary rocks, particularly from deeper producing zones beneath the valley plain, is greater than that of water from the alluvial deposits. Locally, some of the water from the older rocks is too saline for general use. Water samples from domestic wells were analyzed for fecal coliform bacteria. Although these analyses did not indicate ground-water pollution, further study would be required to establish that none exists in the area.

Oregon↗
USGS1991

Modelling the petrogenesis of high Rb/Sr silicic magmas

Rhyolites can be highly evolved with Sr contents as low as 0.1 ppm and Rb Sr > 2,000. In contrast, granite batholiths are commonly comprised of rocks with Rb Sr < 10 and only rarely > 100. Mass-balance modelling of source compositions, differentiation and contamination using the trace-element geochemistry of granites are therefore commonly in error because of the failure to account for evolved differentiates that may have been erupted from the system. Rhyolitic magmas with very low Sr concentrations (???1 ppm) cannot be explained by any partial melting models involving typical crustal source compositions. The only plausible mechanism for the production of such rhyolites is Rayleigh fractional crystallization involving substantial volumes of cumulates. A variety of methods for modelling the differentiation of magmas with extremely high Rb/Sr is discussed. In each case it is concluded that the bulk partition coefficients for Sr have to be large. In the simplest models, the bulk DSr of the most evolved types is modelled as > 50. Evidence from phenocryst/glass/whole-rock concentrations supports high Sr partition coefficients in feldspars from high silica rhyolites. However, the low modal abundance of plagioclase commonly observed in such rocks is difficult to reconcile with such simple fractionation models of the observed trace-element trends. In certain cases, this may be because the apparent trace-element trend defined by the suite of cognetic rhyolites is the product of different batches of magma with separate differentiation histories accumulating in the magma chamber roof zone. ?? 1991.

Chemical Geology↗
USGS1997

Geologic setting and characteristic of mineral deposits in the central Wasatch Mountains, Utah

Base- and precious-metal deposits in the central Wasatch Mountains southeast of Salt Lake City were mined for more than 100 years beginning in 1868. Deposits present in the Park City, Little Cottonwood, and Big Cottonwood mining districts include Ag-Pb-Zn ± Cu ± Au replacements and veins, a low-grade porphyry Cu-Au deposit, Cu-bearing skarns, a quartz monzonite-type (low F) porphyry Mo deposit, and high sulfidation (quartz-alunite) Au deposits. Most production came from polymetallic replacement and vein deposits in the Park City mining district, which has a recorded production of more than 1.4 million oz Au, 253 million oz Ag, 2.7 billion lbs Pb, 1.5 billion lbs Zn, and 129 million lbs Cu from 1872 to 1978. Production in the Little and Big Cottonwood districts, mostly from Pb-Ag replacement deposits, was much smaller. Most mineral deposits in the central Wasatch Mountains are genetically related to the Wasatch igneous belt, a series of high-K calc-alkaline stocks and cogenetic volcanic rocks that formed about 41(?) to 30 Ma. The mineral deposits mostly formed near the end of magmatic activity between about 36 to 31.4 Ma. A subeconomic porphyry Mo deposit in the Little Cottonwood stock is notably younger having formed about 26 to 23.5 Ma. The intrusive rocks were emplaced mostly along the westward extension of the west-trending Uinta arch during a period of NW-SE-directed extension, and much of the mineralization in the Park City district was controlled by ENE-striking normal faults. About 15 degrees of eastward tilting of the central Wasatch Mountains during Late Cenozoic Basin and Range extension has resulted in progressively deeper levels of exposure from <1 km on the east to about 11 km on the west and in profound variations in the types of mineral deposits exposed in different parts of the range. Most deposits formed at paleodepths ≤5 km, and the most productive deposits in the Park City district formed at depths of 1 to 2 km. The porphyry Mo deposit in the Little Cottonwood stock formed at greater depths of about 6 km.

Utah↗
USGS2003

Stable lead isotopes reveal a natural source of high lead concentrations to gasoline-contaminated groundwater

Concentrations of total lead as high as 1,600 μg/L were detected in gasoline-contaminated and uncontaminated groundwater at three gasoline-release sites in South Carolina. Total lead concentrations were highest in turbid groundwater samples from gasoline-contaminated and uncontaminated wells, whereas lower turbidity groundwater samples (collected using low-flow methods) had lower total lead concentrations. Dissolved lead concentrations in all wells sampled, however, were less than 15 μg total lead/L, the current United States Environmental Protection Agency (US EPA) maximum contaminant level (MCL). Because many total lead concentrations exceeded the MCL, the source of lead to the groundwater system at two of the three sites was investigated using a stable lead isotope ratio approach. Plots of the stable isotope ratios of lead (Pb) in groundwater as 207 Pb/ 206 Pb versus 208 Pb/ 206 Pb, and 208 Pb/ 204 Pb versus 206 Pb/ 204 Pb were similar to ratios characteristic of lead-based minerals in local rocks of the southeastern US, and were not similar to the stable lead isotopes ratios characteristic of distant lead ore deposits such as Broken Hill, Australia, used to produce tetraethyl lead in gasoline products prior to its phase-out and ban in the United States. Moreover, the isotopic composition of dissolved lead was equivalent to the isotopic composition of total lead in turbid samples collected from the same well, suggesting that the majority of the lead detected in the groundwater samples was associated with sediment particulates of indigenous aquifer material, rather than lead associated with spilled leaded gasoline. The results of this investigation indicate that (1) lead detected at some gasoline-release sites may be derived from the local aquifer material, rather than the gasoline release, and consequently may affect site-specific remediation goals; (2) non-low flow groundwater sampling methods, such as a disposable bailer, may result in turbid groundwater samples and high total lead concentrations, and; (3) stable lead isotopes can be used to clarify the source of lead detected above permissible levels in gasoline-contaminated groundwater systems.

Environmental Geology↗
USGS2014

Shale hydrocarbon reservoirs: Some influences of tectonics and paleogeography during deposition

Continuous hydrocarbon accumulations in shale reservoirs appear to be characterized by common paleotectonic and paleogeographic histories and are limited to specific intervals of geologic time. In addition, most North American self-sourced shale correlates with geologic time periods of calcitic seas and greenhouse conditions and with evolutionary turnover of marine metazoans. More knowledge about the relations among these controls on deposition is needed, but conceptual modeling suggests that integrating tectonic histories, paleogeographic reconstructions, and eustatic curves may be a useful means by which to better understand shale plays already in development stages and potentially identify new organic-carbon-rich shale targets suitable for continuous resource development. Upwelling and anoxic waters are commonly cited to explain the accumulation and preservation, respectively, of marine organic carbon. In addition, and perhaps alternatively, the broad correlation of self-sourced shale with macroevolutionary trends in land plants and marine metazoans suggests that reduced consumption of organic matter by benthos during periods of high terrestrial and marine organic productivity was responsible. Fundamental to any of the processes that acted during deposition, however, was active tectonism. Basin type can often distinguish self-sourced shale plays from other types of hydrocarbon source rocks. The deposition of North American self-sourced shale was associated with the assembly and subsequent fragmentation of Pangea. Flooded foreland basins along collisional margins were the predominant depositional settings during the Paleozoic, whereas deposition in semirestricted basins was responsible along the rifted passive margin of the U.S. Gulf Coast during the Mesozoic. Tectonism during deposition of self-sourced shale, such as the Upper Jurassic Haynesville Formation, confined (re)cycling of organic materials to relatively closed systems, which promoted uncommonly thick accumulations of organic matter.

Book chapter↗
USGS1986

Platinum-group element resources in podiform chromitites from California and Oregon

Rock samples from about 280 podiform chromite deposits in California and Oregon were analyzed for Pt, Pd, Rh, and Ir by fire assay-atomic absorption and spectrographic techniques to estimate by-product platinum-group element potential of chromite mining. These deposits include ophiolites from the Sierra Nevada, Klamath Mountains, Coast Ranges, and the Canyon Mountain Complex; the deposits vary from Paleozoic to Mesozoic age and vary in size, shape, texture, and degree of metamorphism. The maximum platinum-group element contents (in ppm) measured for chromitites are: Pt, 2.53; Pd, 0.2; Rh, 0.14; Ru, 4.93; and Ir, 2.93.Correlations between Pt and Rh (0.60), Rh and Ir (0.64), Rh and Ru (0.71), and Ir and Ru (0.85) are significant at the 1 percent level. Relatively small but significant differences in platinum-group element content exist between geologic terranes. Chromite production from California and Oregon amounts to about 692,000 metric tons (1914-1985); the mean contained platinum-group element amounts in troy ounces are: Pt, 850; Pd, 100; Rh, 260; Ru, 4200; and Ir, 1,700, using estimated grades. Previous investigators have suggested that relatively few samples can represent the platinum-group element content of a podiform chromite deposit; therefore, these analyses are assumed to approximate "grades." Total world resources of platinum-group elements in podiform chromite deposits are estimated in troy ounces to be: Pt, 210,000; Pd, 25,000; Rh, 64,000; Ru, 1,000,000; and Ir, 420,000.

Economic Geology↗
USGS1979

Maps showing generalized structure contours on the tops of the Wasatch and Green River Formations, geologic sections, and contours of thickness of the Green River Formation, southeastern Uinta Basin, Utah and Colorado

These maps were prepared as part of a hydrologic investigation in the southeastern Uinta Basin, Utah and Colorado. (See index map.) Most of the study area of 2,350 square miles is underlain by consolidated rocks of Tertiary age – the Wasatch, Green River, and Uinta Formations. The Green River Formation contains thick beds of oil shale, which are of considerable economic importance as a potential source of petroleum products. Cashion (1967, pl. 1) showed detailed structure contours on the top of the thickest of the oil-shale beds – the Mahogany bed. The generalized structure contours shoe=wn on sheet 1 for the tops of the Wasatch and Green River Formations were prepared to serve as a guide to further data acquisition. Structural high or low areas, which could affect the direction of ground-water movement, would be considered in planning future test wells. The generalized map of the Green River formation (sheet 2) could be an indication of changes in aquifer thickness, and this would also serve as a guide for future test drilling.

Colorado, Utah↗
USGS1997

Bedrock geology of snyderville basin: Structural geology techniques applied to understanding the hydrogeology of a rapidly developing region, Summit County, Utah

The availability of ground water is a problem for many communities throughout the west. As these communities continue to experience growth, the initial allocation of ground water supplies proves inadequate and may force restrictions on existing, and future, development plans. Much of this new growth relies on ground water supplies extracted from fractured bedrock aquifers. An example of a community faced with this problem is western Summit County, near Park City, Utah, This area has experienced significant water shortages coupled with a 50% growth rate in the past 10-15 years. Recent housing development rests directly on complexly deformed Triassic to Jurassic sedimentary rocks in the hanging wall of the Mount Raymond-Absaroka thrust system. The primary fractured bedrock aquifers are the Nugget Sandstone, and limestones in the Thaynes and Twin Creek Formations. Ground water production and management strategies can be improved if the geometry of the structures and the flow properties of the fractured and folded bedrock can be established. We characterize the structures that may influence ground water flow at two sites: the Pinebrook and Summit Park subdivisions, which demonstrate abrupt changes (less than 1 mi/1.6 km) within the hydrogeologic systems. Geologic mapping at scales of 1:4500 (Pinebrook) and 1:9600 (Summit Park), scanline fracture mapping at the outcrop scale, geologic cross sections, water well data, and structural analysis, provides a clearer picture of the hydrogeologic setting of the aquifers in this region, and has been used to successfully site wells. In the Pinebrook area, the dominate map-scale structures of the area is the Twomile Canyon anticline, a faulted box-like to conical anticline. Widely variable bedding orientations suggest that the fold is segmented and is non-cylindrical and conical on the western limb with a fold axis that plunges to the northwest and also to the southeast, and forms a box-type fold between the middle and eastern limbs with a fold axis that plunges to the northeast. The fold is cut by several faults including the Toll Canyon fault, which we interpret as a west-directed folded hanging-wall splay off the east-directed Mt. Raymond thrust. These complex geometries may be due to at least two phases of deformation. Results from outcrop analyses show that the fractured bedrock aquifers are lithologically heterogeneous, anisotropic, and compartmentalized. Two exposures of the Toll Canyon fault show that even though the fault cores may be thin, extensive damage zones develop in the Nugget Sandstone and Thaynes Limestone, and shale smears form in the Triassic shales. The damaged zones may be regions of enhanced fracture permeability, whereas the shale smears act as flow barriers. The orientation, density, and hydrogeologic characteristics for predominate fracture sets vary within meters. In the Summit Park area, chronic water shortages required new wells to be sited in the northeast-plunging Summit Park anticline. The anticline experienced two phases of folding and at least one episode of faulting. Structural analysis of the fold defined the geometry of the structure, and a down plunge projection along the fold hinge was used to estimate the location of the Nugget Sandstone at a depth of 700 ft (213 m). The crestal region of the anticline was drilled in order to intercept regions of higher fracture density in the fold. The test well penetrated the Nugget Sandstone at 698 ft depth, and two production wells with long-term yields of 120 and 180 gpm completed. One well in the Sliderock Member (Twin Creek Formation) experiences seasonal fluctuations whereas production in the Nugget sandstone has only subdued seasonal variations, suggesting the Nugget may have great storage. Complex structures work against the typical basin yield approach for water budgets, therefore, water supply estimates may benefit from detailed studies within local areas. The results of this study demonstrate how tradition

Brigham Young University Geology Studies↗
USGS1997

In-situ stress and fracture permeability in a fault-hosted geothermal reservoir at Dixie Valley, Nevada

As part of a study relating fractured rock hydrology to in-situ stress and recent deformation within the Dixie Valley Geothermal Field, borehole televiewer logging and hydraulic fracturing stress measurements were conducted in a 2.7-km-deep geothermal production well (73B-7) drilled into the Stillwater fault zone. Borehole televiewer logs from well 73B-7 show numerous drilling-induced tensile fractures, indicating that the direction of the minimum horizontal principal stress, Shmin, is S57 ??E. As the Stillwater fault at this location dips S50 ??E at approximately 3??, it is nearly at the optimal orientation for normal faulting in the current stress field. Analysis of the hydraulic fracturing data shows that the magnitude of Shmin is 24.1 and 25.9 MPa at 1.7 and 2.5 km, respectively. In addition, analysis of a hydraulic fracturing test from a shallow well 1.5 km northeast of 73B-7 indicates that the magnitude of Shmin is 5.6 MPa at 0.4 km depth. Coulomb failure analysis shows that the magnitude of Shmin in these wells is close to that predicted for incipient normal faulting on the Stillwater and subparallel faults, using coefficients of friction of 0.6-1.0 and estimates of the in-situ fluid pressure and overburden stress. Spinner flowmeter and temperature logs were also acquired in well 73B-7 and were used to identify hydraulically conductive fractures. Comparison of these stress and hydrologic data with fracture orientations from the televiewer log indicates that hydraulically conductive fractures within and adjacent to the Stillwater fault zone are critically stressed, potentially active normal faults in the current west-northwest extensional stress regime at Dixie Valley.

Conference Paper↗
USGS1988

Microbial and biogeochernical processes Soda Lake, Nevada

Meromictic, alkaline lakes represent modern-day analogues of lacustrine source rock depositional environments. In order to further our understanding of how these lakes function in terms of limnological and biogeochemical processes, we have conducted an interdisciplinary study of Big Soda Lake. Annual mixolimnion productivity (ca. 500 g m -2 ) is dominated by a winter diatom bloom (60% of annual) caused by upward transport of ammonia to the epilimnion. The remainder of productivity is attributable to chemoautotrophs (30%) and photosynthetic bacteria (10%) present at the oxic -anoxic interface from May to November. Studies of bacterial heterotrophy and particulate fluxes in the water column indicate that about 90% of annual productivity is remineralized in the mixolimnion, primarily by fermentative bacteria. However, high rates of sulphate reduction (9-29 mmol m -2 yr -1 ) occur in the monimolimnion waters, which could remineralize most (if not all) of the primary productivity. This discrepancy has not as yet been fully explained. Low rates of methanogenesis also occur in the monimolimnion waters and sediments. Most of the methane is consumed by anaerobic methane oxidation occurring in the monimolimnion water column. Other bacterial processes occurring in the lake are also discussed. Preliminary studies have been made on the organic geochemistry of the monimolimnion sediments. Carbon-14-dating indicates a lower depositional rate prior to meromixis and a downcore enrichment in 13 C of organic carbon and chlorophyll derivatives. Hydrous pyrolysis experiments indicate that the sediment organic matter is almost entirely derived from the water column with little or no contribution from terrestrial sources. The significance of the organics released by hydrous pyrolysis is discussed.

Book chapter↗
USGS2016

Silicic lunar volcanism: Testing the crustal melting model

Lunar silicic rocks were first identified by granitic fragments found in samples brought to Earth by the Apollo missions, followed by the discovery of silicic domes on the lunar surface through remote sensing. Although these silicic lithologies are thought to make up a small portion of the lunar crust, their presence indicates that lunar crustal evolution is more complex than originally thought. Models currently used to describe the formation of silicic lithologies on the Moon include in situ differentiation of a magma, magma differentiation with silicate liquid immiscibility, and partial melting of the crust. This study focuses on testing a crustal melting model through partial melting experiments on compositions representing lithologies spatially associated with the silicic domes. The experiments were guided by the results of modeling melting temperatures and residual melt compositions of possible protoliths for lunar silicic rocks using the thermodynamic modeling software, rhyolite-MELTS. Rhyolite-MELTS simulations predict liquidus temperatures of 950–1040 °C for lunar granites under anhydrous conditions, which guided the temperature range for the experiments. Monzogabbro, alkali gabbronorite, and KREEP basalt were identified as potential protoliths due to their ages, locations on the Moon (i.e., located near observed silicic domes), chemically evolved compositions, and the results from rhyolite-MELTS modeling. Partial melting experiments, using mixtures of reagent grade oxide powders representing bulk rock compositions of these rock types, were carried out at atmospheric pressure over the temperature range of 900–1100 °C. Because all lunar granite samples and remotely sensed domes have an elevated abundance of Th, some of the mixtures were doped with Th to observe its partitioning behavior. Run products show that at temperatures of 1050 and 1100 °C, melts of the three protoliths are not silicic in nature (i.e., they have <63 wt% SiO 2 ). By 1000 °C, melts of both monzogabbro and alkali gabbronorite approach the composition of granite, but are also characterized by immiscible Si-rich and Fe-rich liquids. Furthermore, Th strongly partitions into the Fe-rich, and not the Si-rich glass in all experimental runs. Our work provides important constraints on the mechanism of silicic melt formation on the Moon. The observed high-Th content of lunar granite is difficult to explain by silicate liquid immiscibility, because through this process, Th is not fractionated into the Si-rich phase. Results of our experiments and modeling suggests that silicic lunar rocks could be produced from monzogabbro and alkali gabbronorite protoliths by partial melting at T < 1000 °C. Additionally, we speculate that at higher pressures ( P ≥ 0.005 GPa), the observed immiscibility in the partial melting experiments would be suppressed.

American Mineralogist↗
USGS1976

Water resources of Lincoln County coastal area, Oregon

The Lincoln County coastal area is underlain by Tertiary volcanic and sedimentary rocks of low permeability that store only a small volume of the annual precipitation which averages 68 inches (1,730 millimeters). Consequently, the Tertiary units yield small quantities of water to wells and furnish little ground-water discharge to maintain the base flow of streams. Although streamflow is normally abundant during the wet season, flow decreases greatly during summer when needed most. Quaternary marine terrace deposits of semiconsolidated sand border the western part of the area and are the most productive aquifers. Several wells drilled into the Quaternary deposits are among the highest producing wells of the area, with yields of 25 to 60 gallons per minute (1.6 to 3.8 liters per second). The Siletz River Volcanics is one of the better aquifers in the area and generally yields water in volumes sufficient for domestic use. The average well drilled into these rocks yields 5 to 10 gallons per minute (0.3 to 0.6 liters per second). Locally, this formation is quite permeable and has a producing well in the study area, with a yield of 120 gallons per minute (7.6 liters per second). Other volcanic rocks of small areal extent and largely untested, are the basalts near Depoe Bay, Cape Foulweather, Yachats, and Cape Perpetua. Wells drilled in January 1976 near Depoe Bay indicate that as much as 125 gal/min (10 L/s) of water can be obtained from wells drilled into the basalt. Tertiary marine sedimentary rocks of siltstone and sandstone are widespread throughout the area. Yields of wells drilled in these rocks are generally low (less than 5 gallons per minute, or 0.3 liters per second), and many wells in these formations produce no usable quantities of ground water. Approximately 5,000,000 acre-feet (6,000 cubic hectometers) of water discharges annually into the Pacific Ocean from all streams along the Lincoln County coast. About 85 percent of the annual streamflow occurs from November through April. Minimum streamflaws occur from August through October when, at times, as little as 450 acre-feet (55 hectometers) per day flows from all streams. Most of the ground water, with the exception of water from some wells drilled in the marine siltstone and sandstone, contains relatively small concentrations of dissolved minerals. Wells that tap the marine deposits at low altitudes have high concentrations of dissolved minerals, particularly sodium and chloride. In general, analyses of water from the 14 streams sampled in Lincoln County show very good chemical quality. The iron content of Depoe and Thiel Creeks is above the Environmental Protection Agency's recommended limit of 0.3 milligrams per liter for drinking water. Annual water use totals 6.7 billion gallons, which is less than 0.5 percent of runoff. About 70 percent of the use is for industrial purposes at one lumber products mill, about 25 percent is for public supplies, and less than 5 percent for irrigation. Water supplies for all municipalities in Lincoln County currently (1975) are obtained from surface-water sources. Because of rapid economic development of the coastal area, it is expected that additional water will be needed in the future. Additional water can be supplied (1) by reservoirs on major streams; (2) by the expansion, in some locations, of present surface-water facilities on small streams; and (3) locally, by an additional small volume of supplemental water from ground-water sources.

Oregon↗
USGS1930

Shorter contributions to general geology, 1929

Thin beds that consist almost wholly of euhedral analcite crystals occur at five or more horizons in the upper half of the Green River formation of Utah and Colorado, a series of Eocene lake beds that contain large deposits of oil shale. Most of these beds contain also minute crystals of apophyllite. The analcite crystals in some beds are cemented only by chalcedony, but in other beds that have less analcite the matrix is tuffaceous and consists of chalcedony in which are embedded splinters of feldspar, hornblende, and quartz, laths of biotite, and euhedral crystals of sanidine, apatite, and zircon. Analcite occurs plentifully also, disseminated in many of the oil-shale beds, and locally makes up as much as 16 per cent of weight of the rock. In these beds the analcite is accompanied by apophyllite, euhedral crystals of sanidine and orthoclase, angular fragments of quartz, and a little volcanic glass. The rocks associated with the beds of analcite and analcite-bearing oil shale contain salt-crystal cavities, that strongly suggest the former presence of glauberite and anhydrite. Both clastic and hydrothermal hypotheses for the origin of the zeolites are considered and dismissed in the paper. The field and microscopic evidence presented leads to the conclusion that all the analcite and apophyllite formed in place on the lake bottom as a result of interactions between salts dissolved in the lake water and the dissolution products of volcanic ash that fell into the lake. Meerschaum, or fibrous sepiolite, occurs in several thin beds near the top of the Green River formation in Duchesne County, Utah. It is mixed with structureless organic matter like that in the oil shale and apparently formed in place on the lake bottom. Chemical analyses of the analcite rock and of the sepiolite are given.

Professional Paper↗
USGS1989

Uranium-series nuclides in the Golden fault, Colorado, U.S.A.: Dating latest fault displacement and measuring recent uptake of radionuclides by fault-zone materials

Concentrations and isotopic ratios of U, Th and Ra were measured in a fault zone near Golden, Colorado where major displacement occurred between about 190 and 615 ka. Faulting created new surfaces for leaching and provided the pathways for U-rich ground water. Uranium and 230 Th, the latter produced by the decay of dissolved 234 U, are adsorbed by fault gouge, hematite-stained sand and brecciated sand- and claystones. The observed U enrichment is as much as six times baseline value and the simultaneous enrichment of 230 Th is estimated at about ninefold relative to 238 U. The adsorption of radionuclides chemically analogous to Th, such as Pu (IV) and Np, and 237 Np decay products, on fault-zone materials would contribute to the immobilization of high-level radioactive waste in the vicinity of a repository in the event of leakage from engineered barriers into fractured rock-mass.

Colorado↗
USGS2022

Microbial community response to a bioaugmentation test to degrade trichloroethylene in a fractured rock aquifer, Trenton, N.J

Bioaugmentation is a promising strategy for enhancing trichloroethylene (TCE) degradation in fractured rock. However, slow or incomplete biodegradation can lead to stalling at degradation byproducts such as 1,2-dichloroethene ( cis -DCE) and vinyl chloride (VC). Over the course of 7 years, we examined the response of groundwater microbial populations in a bioaugmentation test where an emulsified vegetable oil solution (EOS ® ) and a dechlorinating consortium (KB-1 ® ), containing the established dechlorinator Dehalococcoides (DHC), were injected into a TCE-contaminated fractured rock aquifer. Indigenous microbial communities responded within 2 days to added substrate and outcompeted KB-1 ® , and over the years of monitoring, several other notable turnover events were observed. Concentrations of ethene, the end product in reductive dechlorination, had the strongest correlations ( P < .05) with members of Candidatus Colwellbacteria but their involvement in reductive dechlorination is unknown and warrants further investigation.DHC never exceeded 0.6% relative abundance of groundwater microbial communities, despite its previously presumed importance at the site. Increased concentrations of carbon dioxide, acetic acid, and methane were positively correlated with increasing ethene concentrations; however, concentrations of cis- DCE and VC remained high by the end of the monitoring period suggesting preferential enrichment of indigenous partial dechlorinators over bioaugmented complete dechlorinators. This study highlights the importance of characterizing in situ microbial populations to understand how they can potentially enhance or inhibit augmented TCE degradation.

New Jersey↗