Search USGS⌕ Search

USGS · 70019433

Bedrock geology of snyderville basin: Structural geology techniques applied to understanding the hydrogeology of a rapidly developing region, Summit County, Utah

Abstract

The availability of ground water is a problem for many communities throughout the west. As these communities continue to experience growth, the initial allocation of ground water supplies proves inadequate and may force restrictions on existing, and future, development plans. Much of this new growth relies on ground water supplies extracted from fractured bedrock aquifers. An example of a community faced with this problem is western Summit County, near Park City, Utah, This area has experienced significant water shortages coupled with a 50% growth rate in the past 10-15 years. Recent housing development rests directly on complexly deformed Triassic to Jurassic sedimentary rocks in the hanging wall of the Mount Raymond-Absaroka thrust system. The primary fractured bedrock aquifers are the Nugget Sandstone, and limestones in the Thaynes and Twin Creek Formations. Ground water production and management strategies can be improved if the geometry of the structures and the flow properties of the fractured and folded bedrock can be established. We characterize the structures that may influence ground water flow at two sites: the Pinebrook and Summit Park subdivisions, which demonstrate abrupt changes (less than 1 mi/1.6 km) within the hydrogeologic systems. Geologic mapping at scales of 1:4500 (Pinebrook) and 1:9600 (Summit Park), scanline fracture mapping at the outcrop scale, geologic cross sections, water well data, and structural analysis, provides a clearer picture of the hydrogeologic setting of the aquifers in this region, and has been used to successfully site wells. In the Pinebrook area, the dominate map-scale structures of the area is the Twomile Canyon anticline, a faulted box-like to conical anticline. Widely variable bedding orientations suggest that the fold is segmented and is non-cylindrical and conical on the western limb with a fold axis that plunges to the northwest and also to the southeast, and forms a box-type fold between the middle and eastern limbs with a fold axis that plunges to the northeast. The fold is cut by several faults including the Toll Canyon fault, which we interpret as a west-directed folded hanging-wall splay off the east-directed Mt. Raymond thrust. These complex geometries may be due to at least two phases of deformation. Results from outcrop analyses show that the fractured bedrock aquifers are lithologically heterogeneous, anisotropic, and compartmentalized. Two exposures of the Toll Canyon fault show that even though the fault cores may be thin, extensive damage zones develop in the Nugget Sandstone and Thaynes Limestone, and shale smears form in the Triassic shales. The damaged zones may be regions of enhanced fracture permeability, whereas the shale smears act as flow barriers. The orientation, density, and hydrogeologic characteristics for predominate fracture sets vary within meters. In the Summit Park area, chronic water shortages required new wells to be sited in the northeast-plunging Summit Park anticline. The anticline experienced two phases of folding and at least one episode of faulting. Structural analysis of the fold defined the geometry of the structure, and a down plunge projection along the fold hinge was used to estimate the location of the Nugget Sandstone at a depth of 700 ft (213 m). The crestal region of the anticline was drilled in order to intercept regions of higher fracture density in the fold. The test well penetrated the Nugget Sandstone at 698 ft depth, and two production wells with long-term yields of 120 and 180 gpm completed. One well in the Sliderock Member (Twin Creek Formation) experiences seasonal fluctuations whereas production in the Nugget sandstone has only subdued seasonal variations, suggesting the Nugget may have great storage. Complex structures work against the typical basin yield approach for water budgets, therefore, water supply estimates may benefit from detailed studies within local areas. The results of this study demonstrate how tradition

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

K.E. Keighley, W.A. Yonkee, F.X. Ashland, J.P. Evans. 1997. Bedrock geology of snyderville basin: Structural geology techniques applied to understanding the hydrogeology of a rapidly developing region, Summit County, Utah. https://pubs.usgs.gov/publication/70019433

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

Conodont and fusulinid biostratigraphy and history of the Pennsylvanian to Lower Permian Keeler Basin, east-central California

The Pennsylvanian-Lower Permian Keeler Canyon Formation and lower part of the Lower Permian Lone Pine Formation in east-central California were deposited in a deep-water basin that originated in the Morrowan (Early Pennsylvanian), was fully established by the Desmoinesian (Middle Pennsylvanian), and lasted into the Sakmarian (Early Permian). Stratigraphic studies indicate that the Keeler Canyon Formation can be divided into members recognizable throughout the area of our detailed mapping. From older to younger they are the Tinemaha Reservoir, Tihvipah Limestone, Cerro Gordo Spring, and Salt Tram Members. Rocks in this basin, here referred to as the Keeler basin, contain numerous fusulinid and conodont faunas most of which were deposited by sediment-gravity flows probably originating at the margin of the Bird Spring carbonate platform to the northeast. Sixty-one species of Atokan to Sakmarian fusulinids and 38 species of Desmoinesian to Sakmarian conodonts are recognized. These, in addition to four species of Morrowan conodonts previously reported, show that every stage from the Morrowan to Sakmarian is represented in the basin. The fusulinid faunas are composed largely of taxa of the North American craton, especially the south-central USA, with important endemic constituents and some McCloud Limestone forms, representing the Eastern Klamath terrane. Conodonts are closely similar to species in the Ural Mountains region of Russia and Kazakhstan, as well as the American midcontinent. The co-occurrence of fusulinids and conodonts in the Keeler basin results in a better correlation of zones based on these two groups of fossils than generally is possible.

Brigham Young University Geology Studies↗

The crazy hollow formation (Eocene) of central Utah

The Late Eocene Crazy Hollow Formation is a fluviatile and lacustrine unit that was deposited locally in the southwest arm of Lake Uinta during and after the last stages of the lake the deposited the Green River Formation. Most exposures of the Crazy Hollow are located in Sanpete and Sevier Counties. The unit is characterized by a large variety of rock types, rapid facies changes within fairly short distances, and different lithofacies in the several areas where outcrops of the remnants of the formation are concentrated. Mudstone is dominant, volumetrically, but siltstone, shale, sandstone, conglomerate and several varieties of limestone are also present. The fine-grained rocks are mostly highly colored, especially in shades of yellow, orange and red. Sand grains, pebbles and small cobbles of well-rounded black chert are widespread, and "salt-and-pepper sandstone" is the conspicuous characteristic of the Crazy Hollow. The salt-and-pepper sandstone consists of grains of black chert, white chert, quartz and minor feldspar. The limestone beds and lenses are paludal and lacustrine in origin; some are fossiliferous, and contain the same fauna found in the Green River Formation. With trivial exceptions, the Crazy Hollow Formation lies on the upper, limestone member of the Green River Formation, and the beds of the two units are always accordant in attitude. The nature of the contact differs locally: at some sites there is gradation from the Green River to the Crazy Hollow; at others, rocks typical of the two units intertongue; elsewhere there is a disconformity between the two. A variety of bedrock units overlie the Crazy Hollow at different sites. In the southeasternmost districts it is overlain by the late Eocene formation of Aurora; in western Sevier County it is overlain by the Miocene-Pliocene Sevier River Formation; in northernmost Sanpete County it is overlain by the Oligocene volcanics of the Moroni Formation. At many sites bordering Sanpete and Sevier Valleys the Crazy Hollow beds dip beneath Quaternary sediments that fill the two valleys. The Crazy Hollow Formation ranges from 0 to 1,307 feet (0-398 m) thick in the region, but is usually much thinner than the maximum value. At most outcrops it is only a few scores of feet (12-50 m) thick. Its age is middle Eocene, for it is only a little younger than the underlying Green River Formation. The unit developed by the washing of detritus into the basin of the southwest arm of Lake Uinta from the various source rocks in the highlands surrounding the basin. The limestone beds and lenses formed in ponds and small lakes that developed in the basin from time to time during and following the draining and evaporation of Lake Uinta. The qualities of the Crazy Hollow Formation are described in detail for 10 different areas of outcrops in the Sanpete and Sevier Valleys and vicinity.

Brigham Young University Geology Studies↗

Iapetonudus (N. gen.) and Iapetognathus Landing, unusual Earliest Ordovician multielement conodont taxa and their utility for biostratigraphy

The Early Ordovician (Tremadocian) multielement conodont genus Iapetognathus is one of the oldest denticulate euconodont genera known. The ramiform-ramiform apparatus structure of Iapetognathus is not similar morphologically to other Late Cambrian to Earliest Ordovician denticulate multielement taxa, such as Eodentatus or Cordyloduts, because the major denticulate process has a lateral rather than a posterior orientation as it is in the other two examples. For this reason the genus is believed to have developed from the coniform-coniform apparatus Iapetonudus ibexensis (N.gen., n.sp.) through the development of the denticulate lateral processes. The two genera have a number of morphologic features in common and appear in stratigraphic succession. Iapetognathus aengensis (Lindstro??m) is redefined as a multielement taxon using topotype material and Ig. preaengensis Landing is placed in synonymy with it. Iapetognathus sprakersi, recently described by Landing in Landing and others (1996), is recognized as a multielement species and the new multielement species, Ig. fluctivagus, Ig. jilinensis and Ig. landingi n. spp. are described herein, based on type specimens from Utah (U.S.A.), Jilin (China) and Colorado (U.S.A.) respectively. Iapetonudus and Iapetognathus are important genera in defining the level of the Cambrian-Ordovician boundary. Iapetonudus is currently recognized only from Utah, Texas and Oklahoma, but Iapetognathus is cosmopolitan in its distribution.

Brigham Young University Geology Studies↗