Search USGS⌕ Search

SEARCH · Search USGS

Results for “White Paper”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3Linked to original sources
USGS1905

The geology of the Perry Basin in southeastern Maine

The geologic examination of the Perry district, in southeastern Maine, was undertaken at the request of the Survey Commission of the State of Maine. During the 1902-3 session of the Maine legislature an effort was made by petitioners resident in Washington County to obtain from the State an appropriation of $10,000 for coal exploration. The resolve proposed contained a ,proviso necessitating an additional contribution of $5,000 by individuals or corporations interested. The $15,000 thus procured was to be expended in drilling for coal at the most promising localities. The resolve failed to pass, but the Maine Survey Commission decided that the same results could be accomplished by the expenditure of a small portion of the general appropriation for geologic work in cooperation with the United States Geological Survey.

Maine↗
USGS1976

Physical, chemical, and biological aspects of subsurface organic waste injection near Wilmington, North Carolina

From May 1968 to December 1972, an industrial organic waste was injected at rates of 100 to 200 gallons per minute (6.3 to 12.6 litres per second) into a sand, gravel, and limestone aquifer of Late Cretaceous age by Hercules Inc. located near Wilmington, North Carolina. This report presents both field and laboratory data pertaining to the physical, chemical, and biological effects of waste injection into the subsurface at this particular site, a case history of the operation, predictions of the reactions between certain organic wastes and the aquifer components, and descriptions of the effects of these reactions on the subsurface movement of the wastes. The case history documents a situation in which subsurface waste injection could not be considered a successful means of waste disposal. The first injection well was used only for 1 year due to excessive wellhead pressure build-up above the specified pressure limit of 150 pounds per square inch (10.3 bars). A second injection well drilled as a replacement operated for only 5 months before it too began to have problems with plugging. Upward leakage of waste into shallower aquifers was also detected at several wells in the injection-observation well system. The multiple problems of plugging, high pressures, and waste leakage suggested that the reactive nature of the waste with the aquifer into which it was injected was the primary reason for the difficulties experienced with waste injection. A site study was initiated in June 1971 to investigate waste-aquifer interactions. The first stage of the study determined the hydrogeologic conditions at the site, and characterized the industrial waste and the native ground water found in the injection zone and other aquifers. The injection zone consisted of multiple permeable zones ranging in depth from about 850 to 1,000 feet (259 to 305 metres) below land surface. In addition to the injection zone, aquifers were found near depths of 60, 300, 500, and 700 feet (18, 91, 152, and 213 metres) below land surface. The aquifers from 300 feet (91 metres) down to the injection zone were flowing artesian with the natural pressure of the injection zone being 65 feet (20 metres) above land surface at the site. The dissolved solids concentration in the native ground water increased with depth to an average value of 20,800 mg/l (milligram per litre) (two-thirds that of seawater) in the water from the injection zone. Sodium chloride was the major dissolved solid, and all of the ground water below 300-feet (91-metres) depth was slightly alkaline. Dissolved organic carbon of the industrial waste averaged 7,100 mg/l and 95 percent of the organic carbon was identified and quantified. The major organic waste constituents in order of decreasing abundance were acetic acid, formic acid, p-toluic acid, formaldehyde, methanol, terephthalic acid, phthalic acid, and benzoic acid. Prior to injection, the waste was neutralized with lime to pH 4 so that the major inorganic waste constituent was calcium at a concentration of 1,300 mg/l. The second stage of the site study involved the observation of waste-aquifer interactions at various wells as the waste arrived and passed by the wells. Water samples obtained from three observation wells located 1,500 to 2,000 feet (457 to 607 metres) from the original injection well gave evidence for biochemical waste transformations at low waste concentrations. Gas that effervesced from these water samples contained up to 54 percent methane by volume. Ferrous iron concentrations as high as 35 mg/l, hydrogen sulfide gas, and sulfide precipitates were additional indicators of biochemical reductive processes in the subsurface environment. Approximately 3,000 organisms per millilitre were found in uncontaminated ground water from the injection zone whereas in waste-contaminated wells, the number increased to levels as high as 1,000,000 organisms per millilitre. High concentrations of waste were found to be toxic to microo

Professional Paper↗
USGS2010

Integrated use of surface geophysical methods for site characterization — A case study in North Kingstown, Rhode Island

A suite of complementary, non‐invasive surface geophysical methods was used to assess their utility for site characterization in a pilot investigation at a former defense site in North Kingstown, Rhode Island. The methods included frequency‐domain electromagnetics (FDEM), ground‐penetrating radar (GPR), electrical resistivity tomography (ERT), and multi‐channel analysis of surface‐wave (MASW) seismic. The results of each method were compared to each other and to drive‐point data from the site. FDEM was used as a reconnaissance method to assess buried utilities and anthropogenic structures; to identify near‐surface changes in water chemistry related to conductive leachate from road‐salt storage; and to investigate a resistive signature possibly caused by groundwater discharge. Shallow anomalies observed in the GPR and ERT data were caused by near‐surface infrastructure and were consistent with anomalies observed in the FDEM data. Several parabolic reflectors were observed in the upper part of the GPR profiles, and a fairly continuous reflector that was interpreted as bedrock could be traced across the lower part of the profiles. MASW seismic data showed a sharp break in shear wave velocity at depth, which was interpreted as the overburden/bedrock interface. The MASW profile indicates the presence of a trough in the bedrock surface in the same location where the ERT data indicate lateral variations in resistivity. Depths to bedrock interpreted from the ERT, MASW, and GPR profiles were similar and consistent with the depths of refusal identified in the direct‐push wells. The interpretations of data collected using the individual methods yielded non‐unique solutions with considerable uncertainty. Integrated interpretation of the electrical, electromagnetic, and seismic geophysical profiles produced a more consistent and unique estimation of depth to bedrock that is consistent with ground‐truth data at the site. This test case shows that using complementary techniques that measure different properties can be more effective for site characterization than a single‐method investigation.

Rhode Island↗
USGS2016

Iterative ecological forecasting: Needs, opportunities, and challenges

A fundamental environmental challenge facing humanity in the 21st century and beyond is predicting the impacts of global environmental change. This challenge is complicated by the fact that we live on a non-stationary, unreplicated planet that is rapidly moving outside the envelope of natural variability into an historical non-analog world. In other words, while the past helps inform us about how the world has worked, it may no longer be the relevant frame of reference for management, conservation, and sustainability. In this future world the two questions at the foundation of sustainability are “How are ecosystems and the services they provide going to change in the future?” and “How do human decisions affect this trajectory?” These are, at their heart, questions about ecological forecasting.

Conference Paper↗
USGS1985

CHEMISTRY OF LOW-TEMPERATURE GEOTHERMAL WATERS AT KLAMATH FALLS, OREGON.

Chemical and isotopic analyses of well discharges indicate that in the aquifer mixing occurs between shallow cold groundwater containing 2. 0 TU tritium and a deeper tritium-free thermal groundwaer at 100 to 120 degree C. This deeper water apparently results from the mixing of old, tritium-free cold groundwater and deep thermal groundwater at about 190 degree C and 120 mg/kg Cl. The temperature and chlorinity of the deep thermal water are based on SO//4-isotope and silica geothermometers and chloride and silica mixing models.

Conference Paper↗
USGS1988

Stochastic system identification in structural dynamics

Recently, new identification methods have been developed by using the concept of optimal-recursive filtering and stochastic approximation. These methods, known as stochastic identification, are based on the statistical properties of the signal and noise, and do not require the assumptions of current methods. The criterion for stochastic system identification is that the difference between the recorded output and the output from the identified system (i.e., the residual of the identification) should be equal to white noise. In this paper, first a brief review of the theory is given. Then, an application of the method is presented by using ambient vibration data from a nine-story building.

Conference Paper↗
USGS2000

Wildlife tradeoffs based on landscape models of habitat preference

Wildlife tradeoffs based on landscape models of habitat preference were presented. Multiscale logistic regression models were used and based on these models a spatial optimization technique was utilized to generate optimal maps. The tradeoffs were analyzed by gradually increasing the weighting on a single species in the objective function over a series of simulations. Results indicated that efficiency of habitat management for species diversity could be maximized for small landscapes by incorporating spatial context.

Conference Paper↗
USGS1988

Using side scan sonar data in a geographic information system to locate and display lake trout spawning habitat in the Great Lakes

The National Fisheries Research Center-Great Lakes of the U.S. Fish and Wildlife Service has extensively used a side scan sonar to survey and pinpoint lake trout spawning grounds in the Great Lakes. The Geographic Information System (GIS) of the National Ecology Research Center produced maps from the side scan sonar data showing the exact location of the spawning grounds; this will enable current stocking programs to be carried out at those locations. These maps show the geographic position (latitude and longitude) of both the color-coded primary substrate types and the secondary substrate types, which are denoted by overstrikes. The maps must be supplemented with a Loran-C navigation grid for field use. The maps are proving useful to fishery managers by locating lake trout stocking areas in Lakes Michigan and Huron, as well as to researchers who investigate habitat quality on lake trout spawning grounds.

Conference Paper↗