Search USGS⌕ Search

SEARCH · Search USGS

Results for “Total Quality Review”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3Linked to original sources
USGS1979

Annual water-resources review, White Sands Missile Range, New Mexico, 1978

Ground-water data were collected in 1978 at White Sands Missile Range in south-central New Mexico. Total ground-water pumpage in 1978 was 692,045,700 gallons or 7,248,300 less than in 1977. Wells at the Post Headquarters produced 98 percent of the total volume. Water levels in test wells around the Post Headquarters well field show seasonal declines ranging from 14.78 feet to 0.71 feet. The water samples collected from the supply wells show that the chemical quality of the water is slightly better during the period of greatest declines. (Woodard-USGS)

Open-File Report↗
USGS2009

Quality-assurance data for routine water analyses by the U.S. Geological Survey laboratory in Troy, New York - July 2003 through June 2005

The laboratory for analysis of low-ionic-strength water at the U.S. Geological Survey (USGS) Water Science Center in Troy, N.Y., analyzes samples collected by USGS projects throughout the Northeast. The laboratory's quality-assurance program is based on internal and interlaboratory quality-assurance samples and quality-control procedures that were developed to ensure proper sample collection, processing, and analysis. The quality-assurance and quality-control data were stored in the laboratory's Lab Master data-management system, which provides efficient review, compilation, and plotting of data. This report presents and discusses results of quality-assurance and quality control samples analyzed from July 2003 through June 2005. Results for the quality-control samples for 20 analytical procedures were evaluated for bias and precision. Control charts indicate that data for five of the analytical procedures were occasionally biased for either high-concentration or low-concentration samples but were within control limits; these procedures were: acid-neutralizing capacity, total monomeric aluminum, pH, silicon, and sodium. Seven of the analytical procedures were biased throughout the analysis period for the high-concentration sample, but were within control limits; these procedures were: dissolved organic carbon, chloride, nitrate (ion chromatograph), nitrite, silicon, sodium, and sulfate. The calcium and magnesium procedures were biased throughout the analysis period for the low-concentration sample, but were within control limits. The total aluminum and specific conductance procedures were biased for the high-concentration and low-concentration samples, but were within control limits. Results from the filter-blank and analytical-blank analyses indicate that the procedures for 17 of 18 analytes were within control limits, although the concentrations for blanks were occasionally outside the control limits. The data-quality objective was not met for dissolved organic carbon. Sampling and analysis precision are evaluated herein in terms of the coefficient of variation obtained for triplicate samples in the procedures for 18 of the 22 analytes. At least 85 percent of the samples met data-quality objectives for all analytes except total monomeric aluminum (82 percent of samples met objectives), total aluminum (77 percent of samples met objectives), chloride (80 percent of samples met objectives), fluoride (76 percent of samples met objectives), and nitrate (ion chromatograph) (79 percent of samples met objectives). The ammonium and total dissolved nitrogen did not meet the data-quality objectives. Results of the USGS interlaboratory Standard Reference Sample (SRS) Project indicated good data quality over the time period, with ratings for each sample in the satisfactory, good, and excellent ranges or less than 10 percent error. The P-sample (low-ionic-strength constituents) analysis had one marginal and two unsatisfactory ratings for the chloride procedure. The T-sample (trace constituents)analysis had two unsatisfactory ratings and one high range percent error for the aluminum procedure. The N-sample (nutrient constituents) analysis had one marginal rating for the nitrate procedure. Results of Environment Canada's National Water Research Institute (NWRI) program indicated that at least 84 percent of the samples met data-quality objectives for 11 of the 14 analytes; the exceptions were ammonium, total aluminum, and acid-neutralizing capacity. The ammonium procedure did not meet data quality objectives in all studies. Data-quality objectives were not met in 23 percent of samples analyzed for total aluminum and 45 percent of samples analyzed acid-neutralizing capacity. Results from blind reference-sample analyses indicated that data-quality objectives were met by at least 86 percent of the samples analyzed for calcium, chloride, fluoride, magnesium, pH, potassium, sodium, and sulfate. Data-quality objectives were not met by samples analyzed for fluoride.

Open-File Report↗
USGS2006

Quality-Assurance Data for Routine Water Analyses by the U.S. Geological Survey Laboratory in Troy, New York-July 1997 through June 1999

The laboratory for analysis of low-ionic-strength water at the U.S. Geological Survey (USGS) Water Science Center in Troy, N.Y., analyzes samples collected by USGS projects throughout the Northeast. The laboratory's quality-assurance program is based on internal and interlaboratory quality-assurance samples and quality-control procedures that were developed to ensure proper sample collection, processing, and analysis. The quality-assurance/quality-control data for the time period addressed in this report were stored in the laboratory's SAS data-management system, which provides efficient review, compilation, and plotting of data. This report presents and discusses results of quality-assurance and quality- control samples analyzed from July 1997 through June 1999. Results for the quality-control samples for 18 analytical procedures were evaluated for bias and precision. Control charts indicate that data for eight of the analytical procedures were occasionally biased for either high-concentration and (or) low-concentration samples but were within control limits; these procedures were: acid-neutralizing capacity, total monomeric aluminum, total aluminum, ammonium, calcium, chloride, specific conductance, and sulfate. The data from the potassium and sodium analytical procedures are insufficient for evaluation. Results from the filter-blank and analytical-blank analyses indicate that the procedures for 11 of 13 analytes were within control limits, although the concentrations for blanks were occasionally outside the control limits. Blank analysis results for chloride showed that 22 percent of blanks did not meet data-quality objectives and results for dissolved organic carbon showed that 31 percent of the blanks did not meet data-quality objectives. Sampling and analysis precision are evaluated herein in terms of the coefficient of variation obtained for triplicate samples in the procedures for 14 of the 18 analytes. At least 90 percent of the samples met data-quality objectives for all analytes except total aluminum (70 percent of samples met objectives) and potassium (83 percent of samples met objectives). Results of the USGS interlaboratory Standard Reference Sample (SRS) Project indicated good data quality for most constituents over the time period. The P-sample (low-ionic-strength constituents) analysis had good ratings in two of these studies and a satisfactory rating in the third. The results of the T-sample (trace constituents) analysis indicated high data quality with good ratings in all three studies. The N-sample (nutrient constituents) studies had one each of excellent, good, and satisfactory ratings. Results of Environment Canada's National Water Research Institute (NWRI) program indicated that at least 80 percent of the samples met data-quality objectives for 9 of the 13 analytes; the exceptions were dissolved organic carbon, ammonium, chloride, and specific conductance. Data-quality objectives were not met for dissolved organic carbon in two NWRI studies, but all of the samples were within control limits for the last study. Data-quality objectives were not met in 41 percent of samples analyzed for ammonium, 25 percent of samples analyzed for chloride, and 30 percent of samples analyzed for specific conductance. Results from blind reference-sample analyses indicated that data-quality objectives were met by at least 84 percent of the samples analyzed for calcium, chloride, magnesium, pH, and potassium. Data-quality objectives were met by 73 percent of those analyzed for sulfate. The data-quality objective was not met for sodium. The data are insufficient for evaluation of the specific conductance results.

Open-File Report↗
USGS2006

Quality-Assurance Data for Routine Water Analyses by the U.S. Geological Survey Laboratory in Troy, New York--July 1999 through June 2001

The laboratory for analysis of low-ionic-strength water at the U.S. Geological Survey (USGS) Water Science Center in Troy, N.Y., analyzes samples collected by USGS projects throughout the Northeast. The laboratory's quality-assurance program is based on internal and interlaboratory quality-assurance samples and quality-control procedures that were developed to ensure proper sample collection, processing, and analysis. The quality-assurance and quality-control data were stored in the laboratory's LabMaster data-management system, which provides efficient review, compilation, and plotting of data. This report presents and discusses results of quality-assurance and quality-control samples analyzed from July 1999 through June 2001. Results for the quality-control samples for 18 analytical procedures were evaluated for bias and precision. Control charts indicate that data for eight of the analytical procedures were occasionally biased for either high-concentration or low-concentration samples but were within control limits; these procedures were: acid-neutralizing capacity, total monomeric aluminum, total aluminum, calcium, chloride and nitrate (ion chromatography and colormetric method) and sulfate. The total aluminum and dissolved organic carbon procedures were biased throughout the analysis period for the high-concentration sample, but were within control limits. The calcium and specific conductance procedures were biased throughout the analysis period for the low-concentration sample, but were within control limits. The magnesium procedure was biased for the high-concentration and low concentration samples, but was within control limits. Results from the filter-blank and analytical-blank analyses indicate that the procedures for 14 of 15 analytes were within control limits, although the concentrations for blanks were occasionally outside the control limits. The data-quality objective was not met for dissolved organic carbon. Sampling and analysis precision are evaluated herein in terms of the coefficient of variation obtained for triplicate samples in the procedures for 17 of the 18 analytes. At least 90 percent of the samples met data-quality objectives for all analytes except ammonium (81 percent of samples met objectives), chloride (75 percent of samples met objectives), and sodium (86 percent of samples met objectives). Results of the USGS interlaboratory Standard Reference Sample (SRS) Project indicated good data quality over the time period, with most ratings for each sample in the good to excellent range. The P-sample (low-ionic-strength constituents) analysis had one satisfactory rating for the specific conductance procedure in one study. The T-sample (trace constituents) analysis had one satisfactory rating for the aluminum procedure in one study and one unsatisfactory rating for the sodium procedure in another. The remainder of the samples had good or excellent ratings for each study. Results of Environment Canada's National Water Research Institute (NWRI) program indicated that at least 89 percent of the samples met data-quality objectives for 10 of the 14 analytes; the exceptions were ammonium, total aluminum, dissolved organic carbon, and sodium. Results indicate a positive bias for the ammonium procedure in all studies. Data-quality objectives were not met in 50 percent of samples analyzed for total aluminum, 38 percent of samples analyzed for dissolved organic carbon, and 27 percent of samples analyzed for sodium. Results from blind reference-sample analyses indicated that data-quality objectives were met by at least 91 percent of the samples analyzed for calcium, chloride, fluoride, magnesium, pH, potassium, and sulfate. Data-quality objectives were met by 75 percent of the samples analyzed for sodium and 58 percent of the samples analyzed for specific conductance.

Open-File Report↗
USGS2001

Statewide water-quality network for Massachusetts

A water-quality monitoring program is proposed that would provide data to meet multiple information needs of Massachusetts agencies and other users concerned with the condition of the State's water resources. The program was designed by the U.S. Geological Survey and the Massachusetts Department of Environmental Protection, Division of Watershed Management, with input from many organizations involved in water-quality monitoring in the State, and focuses on inland surface waters (streams and lakes). The proposed monitoring program consists of several components, or tiers, which are defined in terms of specific monitoring objectives, and is intended to complement the Massachusetts Watershed Initiative (MWI) basin assessments. Several components were developed using the Neponset River Basin in eastern Massachusetts as a pilot area, or otherwise make use of data from and sampling approaches used in that basin as part of a MWI pilot assessment in 1994. To guide development of the monitoring program, reviews were conducted of general principles of network design, including monitoring objectives and approaches, and of ongoing monitoring activities of Massachusetts State agencies. Network tiers described in this report are primarily (1) a statewide, basin-based assessment of existing surface-water-quality conditions, and (2) a fixed-station network for determining contaminant loads carried by major rivers. Other components, including (3) targeted programs for hot-spot monitoring and other objectives, and (4) compliance monitoring, also are discussed. Monitoring programs for the development of Total Maximum Daily Loads for specific water bodies, which would constitute another tier of the network, are being developed separately and are not described in this report. The basin-based assessment of existing conditions is designed to provide information on the status of surface waters with respect to State water-quality standards and designated uses in accordance with the reporting requirements [Section 305(b)] of the Clean Water Act (CWA). Geographic Information System (GIS)-based procedures were developed to inventory streams and lakes in a basin for these purposes. Several monitoring approaches for this tier and their associated resource requirements were investigated. Analysis of the Neponset Basin for this purpose demonstrated that the large number of sites needed in order for all the small streams in a basin to be sampled (about half of stream miles in the basin were headwater or first-order streams) pose substantial resource-based problems for a comprehensive assessment of existing conditions. The many lakes pose similar problems. Thus, a design is presented in which probabilistic monitoring of small streams is combined with deterministic or targeted monitoring of large streams and lakes to meet CWA requirements and to provide data for other information needs of Massachusetts regulatory agencies and MWI teams. The fixed-station network is designed to permit the determination of contaminant loads carried by the State's major rivers to sensitive inland and coastal receiving waters and across State boundaries. Sampling at 19 proposed sites in 17 of the 27 major basins in Massachusetts would provide information on contaminant loads from 67 percent of the total land area of the State; unsampled areas are primarily coastal areas drained by many small streams that would be impossible to sample within realistic resource limitations. Strategies for hot-spot monitoring, a targeted monitoring program focused on identifying contaminant sources, are described with reference to an analysis of the bacteria sampling program of the 1994 Neponset Basin assessment. Finally, major discharge sites permitted under the National Pollutant Discharge Elimination System (NPDES) were evaluated as a basis for ambient water-quality monitoring. The discharge sites are well distributed geographically among basins, but are primarily on large rivers (two-thirds or more on fourth- or higher order streams). Thus, NPDES sites alone would provide a biased estimate of existing water-quality conditions, but might be useful for some loads determinations if data of sufficient quality could be collected.

Massachusetts↗
USGS2024

Analysis and review of fishery-dependent data for Hawaiian nearshore noncommercial fisheries

Noncommercial, shore-based fisheries provide economic, social, and cultural services to communities throughout the Hawaiian Islands. The State of Hawai‘i Department of Land and Natural Resources (DLNR), Division of Aquatic Resources (DAR) routinely conducts surveys to monitor noncommercial fisheries such that estimates of fishing effort and catch by gear type can be generated and used to implement more sustainable management practices. DAR executes both the Hawai‘i Marine Recreational Fishery Survey (HMRFS), a nationally standardized survey that focuses on intercepting fishers at access points (i.e., boat ramps) across the main Hawaiian Islands, and a set of roving creel surveys on O‘ahu, Maui Nui, and Kaua‘i that observe and intercept fishers at locations along the shoreline outside of those targeted by HMRFS. The latter set of creel surveys were designed to complement HMRFS by expanding its geographic coverage and thus providing a more representative picture of noncommercial fishing in Hawai‘i. Sustainable management priorities set by DAR rely on the availability of statewide, fishery- dependent data. Thus, we collate information from island-based roving creel surveys into a cohesive Statewide Creel Survey Database. Further, we provide preliminary analyses and describe ways that surveys could be streamlined to improve future data collection, analysis, and utility. In so doing, we synthesize the most detailed information to-date about noncommercial shore-based fisheries of Hawai‘i. The unprecedented spatial and temporal coverage of DAR’s dataset reveals the value of their survey efforts over the last decade to address fishery management needs. Our primary objectives, results, and conclusions are summarized below: 1) Integrate DAR roving creel survey data from different islands into a single Statewide Creel Survey Dataset (Chapter II). We describe the collation of creel survey data from O‘ahu, Maui Nui, and Kaua‘i into a statewide dataset. We also offer ways in which these surveys could be streamlined to meet the needs of managers and decision makers. Briefly, these are to create a statewide strategic plan, standardize the execution of standard operating procedures, centralize the creel survey database and associated metadata, and consider using technology that improves the data pipeline, including transitioning from paper-based to electronic systems for data entry and processing. 2) Assess whether the new Statewide Creel Survey Dataset can provide inputs for length-based stock assessments (Chapter III). Only on Maui were interviews conducted with associated catch data. There was reasonably high taxonomic coverage (42 species from 186 interviews with 310 fishers), but low sample sizes for nearly all species precluded the development of length-based stock assessments. We provide summary statistics from the existing data and briefly discuss how technologies could be used to automate analysis of images of noncommercial catch. 3) Analyze the Statewide Creel Survey Dataset for spatial and temporal patterns in fishing effort (Chapter IV): a. Visualizing noncommercial fishing pressure . We found that fishing effort (mean number of fishers observed per survey event at a site) on O'ahu was over three times greater than that recorded during similar surveys conducted on Maui or Kaua'i. We create maps that display the distribution of angling and spearfishing effort around each of the three islands. b. Factors that predict fishing “hotspots” around Maui . Fishing effort on Maui was associated with areas with more wave power and less parking availability. There were half as many fishers in areas with parking lots than in areas with parking on the road shoulder only. c. Changes in fishing effort during the COVID-19 pandemic . There was no change in fishing effort on O‘ahu during the first year of the pandemic, but there was a 20% decline in year 2 and a 33% decline in year 3, both in comparison to pre-pandemic levels. Pre-pandemic creel survey data were unavailable for Maui and Kaua‘i, but fishing effort on these islands also declined as the pandemic progressed at similar or greater rates than those observed on O‘ahu. 4) Quantify potential bias in survey methods by experimentally deriving fisher detection probabilities of shore-based and drone-based surveys (Chapter V): a. Shore-based surveys . We conducted roving creel surveys for four months at three locations around Hilo Bay, designed to emulate and estimate the efficacy of DAR standard operating procedures. There was high agreement between paired observers in counting fishers, leading to near-perfect detection probabilities of both anglers (94%) and spearfishers (97%), but relatively low agreement and detection probabilities of other fishers (throw net, ‘opihi picking, etc.) (52%). b. Drone-based surveys . We used an unmanned aerial vehicle (UAV; operated by DAR staff) to collect imagery of fishers along the Hilo Bay shoreline. We used still images and video clips (with known fishing activity) to build an online survey that was distributed to DAR and HCFRU personnel, asking them to count and categorize resource users as a snorkeler, spearfisher, angler, or other fisher. Only 40.0% of the responses correctly counted and categorized resource users in the image. Anglers were correctly identified and enumerated in 90.0% of the responses, but the correct response rates of the other three user categories ranged from 67.8% – 79.4%. Snorkelers and anglers tended to be undercounted while spearfishers and other fishers were overcounted. 5) Review the potential for incorporating emerging technologies that will improve, augment, and evolve creel survey data collection, especially for spearfishing (Chapter VI). Within the context of monitoring shore-based noncommercial fishing, we review the use of electronic data entry/processing systems with geospatial and image capabilities, field cameras, drones, smart buoys, citizen science apps, data mining social media, artificial intelligence and machine learning. We highlight several of the challenges and considerations when implementing these technologies into creel surveys and provide a synthesis of options that could be used to better estimate spearfishing. The general conclusion of this assessment is that the DAR roving creel survey program is collecting valuable data that supplement the existing HMRFS efforts. However, there are a number of areas that could be improved to make these efforts a more effective tool for decision-making processes in resource management and conservation: 1) Establishment of clear statewide and island objectives for the Statewide Creel Survey Dataset. Currently, data collection efforts are focused towards addressing a very broad purpose – supplementing the HMRFS data collection efforts. However, the results of the preliminary analyses conducted as part of this project suggest that the data could be used to address other areas of need if these objectives were clearly defined. Further, the design of the creel survey would benefit from greater standardization of survey protocols between islands and an effort to define a) the acceptable margins of error associated with the estimates generated by these data and b) the minimum level of change that the surveys would need to detect to be useful to managers. 2) Centralization of data entry, data quality assessment, and data accessibility. Currently, each DAR office manages data entry, checks the data for errors, and is responsible for managing and storing the data. Instituting a centralized data entry system, particularly an online database that can receive survey data from tablets or smartphones running a standardized data collection application would improve efficiency, reduce data entry errors, and accelerate the availability of data to managers. A substantial amount of time and effort from the project described in this report was devoted to checking the dataset for errors. The development and application of data quality assurance protocols would ensure that the data are reliable and available in a timely fashion to support management decisions. 3) Address lingering questions regarding the efficacy of current survey protocols to capture and characterize the spearfishing component of the noncommercial fishery. The results presented in the report suggest that the current creel survey protocols do a good job detecting spearfishers when present but are not capturing sufficient data about their catch or total effort. There are also questions remaining as to whether the survey times and sites are sufficiently capturing the behavior of spearfishers in Hawai‘i. A more thorough assessment – whether through additional research, alteration of survey design, or review of data by representatives of the spearfishing community – would provide insight on how to use the Statewide Creel Survey Database to inform management of spearfishing. 4) Investigate the integration of technological advancements into the creel survey methods. As priorities and needs are developed and formalized, it would be valuable to consider how various technological advancements might enhance and streamline data collection or open new avenues of inquiry.

Hawaii↗
USGS2002

Inventory and review of aquifer storage and recovery in southern Florida

Aquifer storage and recovery in southern Florida has been proposed on an unprecedented scale as part of the Comprehensive Everglades Restoration Plan. Aquifer storage and recovery wells were constructed or are under construction at 27 sites in southern Florida, mostly by local municipalities or counties located in coastal areas. The Upper Floridan aquifer, the principal storage zone of interest to the restoration plan, is the aquifer being used at 22 of the sites. The aquifer is brackish to saline in southern Florida, which can greatly affect the recovery of the freshwater recharged and stored. Well data were inventoried and compiled for all wells at most of the 27 sites. Construction and testing data were compiled into four main categories: (1) well identification, location, and construction data; (2) hydraulic test data; (3) ambient formation water-quality data; and (4) cycle testing data. Each cycle during testing or operation includes periods of recharge of freshwater, storage, and recovery that each last days or months. Cycle testing data include calculations of recovery efficiency, which is the percentage of the total amount of potable water recharged for each cycle that is recovered. Calculated cycle test data include potable water recovery efficiencies for 16 of the 27 sites. However, the number of cycles at most sites was limited; except for two sites, the highest number of cycles was five. Only nine sites had a recovery efficiency above 10 percent for the first cycle, and 10 sites achieved a recovery efficiency above 30 percent during at least one cycle. The highest recovery efficiency achieved per cycle was 84 percent for cycle 16 at the Boynton Beach site. Factors that could affect recovery of freshwater varied widely between sites. The thickness of the open storage zone at all sites ranged from 45 to 452 feet. For sites with the storage zone in the Upper Floridan aquifer, transmissivity based on tests of the storage zones ranged from 800 to 108,000 feet squared per day, leakance values indicated that confinement is not good in some areas, and the chloride concentration of ambient water ranged from 500 to 11,000 milligrams per liter. Based on review of four case studies and data from other sites, several hydrogeologic and design factors appear to be important to the performance of aquifer storage and recovery in the Floridan aquifer system. Performance is m aximized when the storage zone is thin and located at the top of the Upper Floridan aquifer, and transmissivity and salinity of the storage zone are moderate (less than 30,000 feet squared per day and 3,000 milligrams per liter of chloride concentration, respectively). The structural setting at a site could also be important because of the potential for updip migration of a recharged freshwater bubble due to density contrast or loss of overlying confinement due to deformation.

Florida↗
USGS1987

The U.S. Geological Survey Federal-State Cooperative Water-Resources Program, fiscal year 1986

The U.S. Geological Survey 's Federal-State Cooperative Water Resources Program has been in operation for 91 years as of fiscal year (FY) 1986. Hydrologic data collection and interpretive investigations are underway in every State, Puerto Rico, and several territories in cooperation with more than 900 State, regional and local agencies. Federal funds amounted to $49.8 million in this 50-50 matching activity. Total funding was about $106 million, which included $6.9 million furnished by cooperating agencies on an unmatched basis. The Cooperative Program comprised more than 40% of the overall FY 1986 budget of the Survey 's Water Resources Division. The areas of principal emphasis during the year included groundwater contamination, stream quality, water supply and demand, and hydrologic hazards. Information is presented on program priorities and investigations implemented under the merit proposal process. The status of water use information activities, which are being carried out in 48 states and Puerto Rico is reviewed briefly. Standard methods for collecting the data are being developed. Each state has a computerized State Water-Use Data System for storage and retrieval of water-use data for individual users or facilities. (Lantz-PTT)

Open-File Report↗
USGS2004

Analysis of phosphorus trends and evaluation of sampling designs in the Quinebaug River Basin, Connecticut

A time-series analysis approach developed by the U.S. Geological Survey was used to analyze trends in total phosphorus and evaluate optimal sampling designs for future trend detection, using long-term data for two water-quality monitoring stations on the Quinebaug River in eastern Connecticut. Trend-analysis results for selected periods of record during 1971?2001 indicate that concentrations of total phosphorus in the Quinebaug River have varied over time, but have decreased significantly since the 1970s and 1980s. Total phosphorus concentrations at both stations increased in the late 1990s and early 2000s, but were still substantially lower than historical levels. Drainage areas for both stations are primarily forested, but water quality at both stations is affected by point discharges from municipal wastewater-treatment facilities. Various designs with sampling frequencies ranging from 4 to 11 samples per year were compared to the trend-detection power of the monthly (12-sample) design to determine the most efficient configuration of months to sample for a given annual sampling frequency. Results from this evaluation indicate that the current (2004) 8-sample schedule for the two Quinebaug stations, with monthly sampling from May to September and bimonthly sampling for the remainder of the year, is not the most efficient 8-sample design for future detection of trends in total phosphorus. Optimal sampling schedules for the two stations differ, but in both cases, trend-detection power generally is greater among 8-sample designs that include monthly sampling in fall and winter. Sampling designs with fewer than 8 samples per year generally provide a low level of probability for detection of trends in total phosphorus. Managers may determine an acceptable level of probability for trend detection within the context of the multiple objectives of the state?s water-quality management program and the scientific understanding of the watersheds in question. Managers may identify a threshold of probability for trend detection that is high enough to justify the agency?s investment in the water-quality sampling program. Results from an analysis of optimal sampling designs can provide an important component of information for the decision-making process in which sampling schedules are periodically reviewed and revised. Results from the study described in this report and previous studies indicate that optimal sampling schedules for trend detection may differ substantially for different stations and constituents. A more comprehensive statewide evaluation of sampling schedules for key stations and constituents could provide useful information for any redesign of the schedule for water-quality monitoring in the Quinebaug River Basin and elsewhere in the state.

Scientific Investigations Report↗
USGS1999

Review of Phosphorus Control Measures in the United States and Their Effects on Water Quality

Historical information on phosphorus loadings to the environment and the effect on water quality are summarized in this report, which was produced as part of the U.S. Geological Survey's National Water-Quality Assessment (NAWQA) Program. Phosphorus is a water-quality constituent of concern because it is often the limiting nutrient responsible for accelerated eutrophication in water bodies. Phosphorus inputs to the environment have increased since 1950 as the use of phosphate fertilizer, manure, and phosphate laundry detergent increased; however, the manufacture of phosphate detergent for household laundry was ended voluntarily in about 1994 after many States had established phosphate detergent bans. Total phosphorus concentrations in raw wastewater effluent contained about 3 milligrams per liter of total phosphorus during the 1940's, increased to about 11 milligrams per liter at the height of phosphate detergent use (1970), and have currently declined to about 5 milligrams per liter. However, in some cases, tertiary wastewater treatment still is needed to effectively improve water quality of streams. Downward trends in phosphorus concentrations since 1970 have been identified in many streams, but median total phosphorus concentrations still exceed the recommended limit of 0.1 milligram per liter across much of the Nation. Data from the NAWQA Program are representative of a variety of phosphorus-control measures, and, therefore, may be used to evaluate the effects of various control strategies. Current areas of concern include: evaluation of the effects of increased manure loadings of phosphorus on soil phosphorus and, subsequently, on ground water and subsurface runoff; determination of point-source and nonpoint-source components of phosphorus loads by geographic modeling and hydrologic separation techniques; and development of methods or indices to evaluate nutrient impairment in streams and rivers to serve as a basis for developing phosphorus criteria or standards.

Water-Resources Investigations Report↗
USGS2024

Trends and environmental impacts of virtual water trade

Virtual water describes water embedded in the production of goods and offers meaningful insights about the complex interplay between water, trade and sustainability. In this Review, we examine the trends, major players, traded products and key drivers of virtual water trade (VWT). Roughly 20% of water used in global food production is traded virtually rather than domestically consumed. As such, agriculture dominates VWT, with livestock products, wheat, maize, soybean, oil palm, coffee and cocoa contributing over 70% of total VWT. These products are also driving VWT growth, the volume of which has increased 2.9 times from 1986 to 2022. However, the countries leading VWT contributions (with China, the United States, the Netherlands, Germany and India accounting for 34% of the global VWT in 2022) have remained relatively stable over time, albeit with China becoming an increasingly important importer. VWT can mitigate the effects of water scarcity and food insecurity, although there are concerns about the disconnect between consumers and the environmental impacts of their choices, and unsustainable resource exploitation. Indeed, approximately 16% of unsustainable water use and 11% of global groundwater depletion are virtually traded. Future VWT analyses must consider factors such as water renewability, water quality, climate change impacts and socioeconomic implications.

Nature Reviews Earth & Environment↗
USGS1999

Water-sediment controversy in setting environmental standards for selenium

A substantial amount of laboratory and field research on selenium effects to biota has been accomplished since the national water quality criterion was published for selenium in 1987. Many articles have documented adverse effects on biota at concentrations below the current chronic criterion of 5 μg/L. This commentary will present information to support a national water quality criterion for selenium of 2 μg/L, based on a wide array of support from federal, state, university, and international sources. Recently, two articles have argued for a sediment-based criterion and presented a model for deriving site-specific criteria. In one example, they calculate a criterion of 31 μg/L for a stream with a low sediment selenium toxicity threshold and low site-specific sediment total organic carbon content, which is substantially higher than the national criterion of 5 μg/L. Their basic premise for proposing a sediment-based method has been critically reviewed and problems in their approach are discussed.

Ecotoxicology and Environmental Safety↗
USGS2013

A review of selected inorganic surface water quality-monitoring practices: are we really measuring what we think, and if so, are we doing it right?

Successful environmental/water quality-monitoring programs usually require a balance between analytical capabilities, the collection and preservation of representative samples, and available financial/personnel resources. Due to current economic conditions, monitoring programs are under increasing pressure to do more with less. Hence, a review of current sampling and analytical methodologies, and some of the underlying assumptions that form the bases for these programs seems appropriate, to see if they are achieving their intended objectives within acceptable error limits and/or measurement uncertainty, in a cost-effective manner. That evaluation appears to indicate that several common sampling/processing/analytical procedures (e.g., dip (point) samples/measurements, nitrogen determinations, total recoverable analytical procedures) are generating biased or nonrepresentative data, and that some of the underlying assumptions relative to current programs, such as calendar-based sampling and stationarity are no longer defensible. The extensive use of statistical models as well as surrogates (e.g., turbidity) also needs to be re-examined because the hydrologic interrelationships that support their use tend to be dynamic rather than static. As a result, a number of monitoring programs may need redesigning, some sampling and analytical procedures may need to be updated, and model/surrogate interrelationships may require recalibration.

Environmental Science & Technology↗
USGS2006

Location and timing of river-aquifer exchanges in six tributaries to the Columbia River in the Pacific Northwest of the United States

The flow of water between rivers and contiguous aquifers influences the quantity and quality of water resources, particularly in regions where precipitation and runoff are unevenly distributed through the year, such as the Columbia Basin (CB) in northwestern United States. Investigations of basin hydrogeology and gains and losses of streamflow for six rivers in the CB were reviewed to characterize general patterns in the timing and location of river-aquifer exchanges at a reach-scale (0.5-150 km) and to identify geologic and geomorphic features associated with the largest exchanges. Ground-water discharge to each river, or the gain in streamflow, was concentrated spatially: more than one-half of the total gains along each river segment were contributed from reaches that represented no more than 30% of the total segment length with the largest and most concentrated gains in rivers in volcanic terrains. Fluvial recharge of aquifers, or losses of streamflow, was largest in rivers in sedimentary basins where unconsolidated sediments form shallow aquifers. Three types of geologic or geomorphic features were associated with the largest exchanges: (1) changes in the thickness of unconsolidated aquifers; (2) contacts between lithologic units that represent contrasts in permeability; and (3) channel forms that increase the hydraulic gradient or cross-sectional area of flow paths between a river and shallow ground-water. The down-valley component of ground-water flow and its vertical convergence on or divergence from a riverbed account for large streamflow gains in some reaches and contrast with the common assumption of lateral ground-water discharge to a river that penetrates completely through the aquifer. Increased ground-water discharge was observed during high-flow periods in reaches of four rivers indicating that changes in ground-water levels can be more important than stage fluctuations in regulating the direction and magnitude of river-aquifer exchanges and that assumptions about ground-water discharge during high flow periods used for base-flow separation must be verified. Given the variety of geologic terrains in the CB, the spatial and temporal patterns of river-aquifer exchanges provide a framework for investigations in other regions that includes a focus on reaches where the largest exchanges are likely to occur, integration of ground-water and surface-water data, and verification of assumptions regarding ground-water flow direction and temporal variation of exchanges. ?? 2006 Elsevier B.V. All rights reserved.

Journal of Hydrology↗
USGS2008

Potentiometric Surface in the Sparta-Memphis Aquifer of the Mississippi Embayment, Spring 2007

The most widely used aquifer for industry and public supply in the Mississippi embayment in Arkansas, Louisiana, Mississippi, and Tennessee is the Sparta-Memphis aquifer. Decades of pumping from the Sparta-Memphis aquifer have affected ground-water levels throughout the Mississippi embayment. Regional assessments of water-level data from the aquifer are important to document regional water-level conditions and to develop a broad view of the effects of ground-water development and management on the sustainability and availability of the region's water supply. This information is useful to identify areas of water-level declines, identify cumulative areal declines that may cross State boundaries, evaluate the effectiveness of ground-water management strategies practiced in different States, and identify areas with substantial data gaps that may preclude effective management of ground-water resources. A ground-water flow model of the northern Mississippi embayment is being developed by the Mississippi Embayment Regional Aquifer Study (MERAS) to aid in answering questions about ground-water availability and sustainability. The MERAS study area covers parts of eight states including Alabama, Arkansas, Illinois, Kentucky, Louisiana, Mississippi, Missouri, and Tennessee and covers approximately 70,000 square miles. The U.S. Geological Survey (USGS) and the Mississippi Department of Environmental Quality Office of Land and Water Resources measured water levels in wells completed in the Sparta-Memphis aquifer in the spring of 2007 to assist in the MERAS model calibration and to document regional water-level conditions. Measurements by the USGS and the Mississippi Department of Environmental Quality Office of Land and Water Resources were done in cooperation with the Arkansas Natural Resources Commission; the Arkansas Geological Survey; Memphis Light, Gas and Water; Shelby County, Tennessee; and the city of Germantown, Tennessee. In 2005, total water use from the Sparta-Memphis aquifer in the Mississippi embayment was about 540 million gallons per day (Mgal/d). Water use from the Sparta-Memphis aquifer was about 170 Mgal/d in Arkansas, about 68 Mgal/d in Louisiana, about 97 Mgal/d in Mississippi, and about 205 Mgal/d in Tennessee. The author acknowledges, with great appreciation, the efforts of the personnel in the U.S. Geological Survey Water Science Centers of Arkansas, Kentucky, Louisiana, Mississippi, Missouri, and Tennessee, and the Mississippi Department of Environmental Quality Office of Land and Water Resources that participated in the planning, water-level measurement, data evaluation, and review of the potentiometric-surface map. Without the contribution of data and the technical assistance of their staffs, this report would not have been completed.

Scientific Investigations Map↗
USGS2017

Acute and chronic toxicity of aluminum to a unionid mussel (Lampsilis siliquoidea) and an amphipod (Hyalella azteca) in water‐only exposures

The US Environmental Protection Agency (USEPA) is reviewing the protectiveness of the national ambient water quality criteria (WQC) for aluminum (Al) and compiling a toxicity data set to update the WQC. Freshwater mussels are one of the most imperiled groups of animals in the world, but little is known about their sensitivity to Al. The objective of the present study was to evaluate acute 96‐h and chronic 28‐d toxicity of Al to a unionid mussel ( Lampsilis siliquoidea ) and a commonly tested amphipod ( Hyalella azteca ) at a pH of 6 and water hardness of 100 mg/L as CaCO 3 . The acute 50% effect concentration (EC50) for survival of both species was >6200 μg total Al/L. The EC50 was greater than all acute values in the USEPA acute Al data set for freshwater species at a pH range of 5.0 to <6.5 and hardness normalized to 100 mg/L, indicating that the mussel and amphipod were insensitive to Al in acute exposures. The chronic 20% effect concentration (EC20) based on dry weight was 163 μg total Al/L for the mussel and 409 μg total Al/L for the amphipod. Addition of the EC20s to the USEPA chronic Al data set for pH 5.0 to <6.5 would rank the mussel ( L. siliquoidea ) as the fourth most sensitive species and the amphipod ( H. azteca ) as the fifth most sensitive species, indicating the 2 species were sensitive to Al in chronic exposures. The USEPA‐proposed acute and chronic WQC for Al would adequately protect the mussel and amphipod tested; however, inclusion of the chronic data from the present study and recalculation of the chronic criterion would likely lower the proposed chronic criterion.

Environmental Toxicology and Chemistry↗
USGS2010

Adherence to balance tolerance limits at the Upper Mississippi Science Center, La Crosse, Wisconsin

Verification of balance accuracy entails applying a series of standard masses to a balance prior to use and recording the measured values. The recorded values for each standard should have lower and upper weight limits or tolerances that are accepted as verification of balance accuracy under normal operating conditions. Balance logbooks for seven analytical balances at the Upper Mississippi Science Center were checked over a 3.5-year period to determine if the recorded weights were within the established tolerance limits. A total of 9435 measurements were checked. There were 14 instances in which the balance malfunctioned and operators recorded a rationale in the balance logbook. Sixty-three recording errors were found. Twenty-eight operators were responsible for two types of recording errors: Measurements of weights were recorded outside of the tolerance limit but not acknowledged as an error by the operator (n = 40); and measurements were recorded with the wrong number of decimal places (n = 23). The adherence rate for following tolerance limits was 99.3%. To ensure the continued adherence to tolerance limits, the quality-assurance unit revised standard operating procedures to require more frequent review of balance logbooks.

Quality assurance (San Diego, Calif.)↗
USGS2009

Quality-Assurance Data for Routine Water Analyses by the U.S. Geological Survey Laboratory in Troy, New York - July 2001 Through June 2003

The laboratory for analysis of low-ionic-strength water at the U.S. Geological Survey (USGS) Water Science Center in Troy, N.Y., analyzes samples collected by USGS projects throughout the Northeast. The laboratory's quality-assurance program is based on internal and interlaboratory quality-assurance samples and quality-control procedures that were developed to ensure proper sample collection, processing, and analysis. The quality-assurance and quality-control data were stored in the laboratory's Lab Master data-management system, which provides efficient review, compilation, and plotting of data. This report presents and discusses results of quality-assurance and quality control samples analyzed from July 2001 through June 2003. Results for the quality-control samples for 19 analytical procedures were evaluated for bias and precision. Control charts indicate that data for six of the analytical procedures were occasionally biased for either high-concentration or low-concentration samples but were within control limits; these procedures were: acid-neutralizing capacity, chloride, magnesium, nitrate (ion chromatography), potassium, and sodium. The calcium procedure was biased throughout the analysis period for the high-concentration sample, but was within control limits. The total monomeric aluminum and fluoride procedures were biased throughout the analysis period for the low-concentration sample, but were within control limits. The total aluminum, pH, specific conductance, and sulfate procedures were biased for the high-concentration and low-concentration samples, but were within control limits. Results from the filter-blank and analytical-blank analyses indicate that the procedures for 16 of 18 analytes were within control limits, although the concentrations for blanks were occasionally outside the control limits. The data-quality objective was not met for the dissolved organic carbon or specific conductance procedures. Sampling and analysis precision are evaluated herein in terms of the coefficient of variation obtained for triplicate samples in the procedures for 18 of the 21 analytes. At least 90 percent of the samples met data-quality objectives for all procedures except total monomeric aluminum (83 percent of samples met objectives), total aluminum (76 percent of samples met objectives), ammonium (73 percent of samples met objectives), dissolved organic carbon (86 percent of samples met objectives), and nitrate (81 percent of samples met objectives). The data-quality objective was not met for the nitrite procedure. Results of the USGS interlaboratory Standard Reference Sample (SRS) Project indicated satisfactory or above data quality over the time period, with most performance ratings for each sample in the good-to-excellent range. The N-sample (nutrient constituents) analysis had one unsatisfactory rating for the ammonium procedure in one study. The T-sample (trace constituents) analysis had one unsatisfactory rating for the magnesium procedure and one marginal rating for the potassium procedure in one study and one unsatisfactory rating for the sodium procedure in another. Results of Environment Canada's National Water Research Institute (NWRI) program indicated that at least 90 percent of the samples met data-quality objectives for 10 of the 14 analytes; the exceptions were acid-neutralizing capacity, ammonium, dissolved organic carbon, and sodium. Data-quality objectives were not met in 37 percent of samples analyzed for acid-neutralizing capacity, 28 percent of samples analyzed for dissolved organic carbon, and 30 percent of samples analyzed for sodium. Results indicate a positive bias for the ammonium procedure in one study and a negative bias in another. Results from blind reference-sample analyses indicated that data-quality objectives were met by at least 90 percent of the samples analyzed for calcium, chloride, magnesium, pH, potassium, and sodium. Data-quality objectives were met by 78 percent of

Open-File Report↗