SEARCH · Search USGS

Results for “Chemical Senses”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3Linked to original sources

USGS2011

Field Reconnaissance Geologic Mapping of the Columbia Hills, Mars: Results from MER Spirit and MRO HiRISE Observations

Chemical, mineralogic, and lithologic ground truth was acquired for the first time on Mars in terrain units mapped using orbital Mars Reconnaissance Orbiter's High Resolution Imaging Science Experiment (MRO HiRISE) image data. Examination of several dozen outcrops shows that Mars is geologically complex at meter length scales, the record of its geologic history is well exposed, stratigraphic units may be identified and correlated across significant areas on the ground, and outcrops and geologic relationships between materials may be analyzed with techniques commonly employed in terrestrial field geology. Despite their burial during the course of Martian geologic time by widespread epiclastic materials, mobile fines, and fall deposits, the selective exhumation of deep and well-preserved geologic units has exposed undisturbed outcrops, stratigraphic sections, and structural information much as they are preserved and exposed on Earth. A rich geologic record awaits skilled future field investigators on Mars. The correlation of ground observations and orbital images enables construction of a corresponding geologic reconnaissance map. Most of the outcrops visited are interpreted to be pyroclastic, impactite, and epiclastic deposits overlying an unexposed substrate, probably related to a modified Gusev crater central peak. Fluids have altered chemistry and mineralogy of these protoliths in degrees that vary substantially within the same map unit. Examination of the rocks exposed above and below the major unconformity between the plains lavas and the Columbia Hills directly confirms the general conclusion from remote sensing in previous studies over past years that the early history of Mars was a time of more intense deposition and modification of the surface. Although the availability of fluids and the chemical and mineral activity declined from this early period, significant later volcanism and fluid convection enabled additional, if localized, chemical activity.

Journal of Geophysical Research E: Planets↗

USGS1994

Why is the ocean salty?

All water, even rain water, contains dissolved chemicals which scientists call "salts." But not all water tastes salty. Water is fresh or salty according to individual judgment, and in making this decision man is more convinced by his sense of taste than by a laboratory test. It is one's taste buds that accept one water and reject another.

General Interest Publication↗

USGS2014

The Tetracorder user guide: version 4.4

Imaging spectroscopy mapping software assists in the identification and mapping of materials based on their chemical properties as expressed in spectral measurements of a planet including the solid or liquid surface or atmosphere. Such software can be used to analyze field, aircraft, or spacecraft data; remote sensing datasets; or laboratory spectra. Tetracorder is a set of software algorithms commanded through an expert system to identify materials based on their spectra (Clark and others, 2003). Tetracorder also can be used in traditional remote sensing analyses, because some of the algorithms are a version of a matched filter. Thus, depending on the instructions fed to the Tetracorder system, results can range from simple matched filter output, to spectral feature fitting, to full identification of surface materials (within the limits of the spectral signatures of materials over the spectral range and resolution of the imaging spectroscopy data). A basic understanding of spectroscopy by the user is required for developing an optimum mapping strategy and assessing the results.

Open-File Report↗

USGS2022

What determines the effectiveness of Pinyon-Juniper clearing treatments? Evidence from the remote sensing archive and counter-factual scenarios

In the intermountain western US, expansion of Pinyon ( Pinus edulis) and Juniper ( Juniperus spp. ) woodlands (PJ) into grasslands and shrublands is a pervasive phenomenon, and an example of the global trend towards enhanced woody growth in drylands. Due to the perceived impacts of these expansions on ecosystem services related to biodiversity, hydrology, soil stability, fire prevention, and livestock forage, mechanical and chemical PJ reduction treatments have been a long-standing practice in the region. More recently, PJ reduction practices have come under enhanced public scrutiny, due to potential impacts on PJ-dependent wildlife, risk of erosion due to soil disturbance, and cost effectiveness due to variable rates of long-term success. Moreover, there is growing interest in understanding the biotic, abiotic, and management conditions under which PJ reduction treatments are effective. Here, we evaluated PJ reduction treatment outcomes leveraging large, curated databases of land treatments, new remotely sensed fractional cover time-series products, gridded climate and soils data, and analytical approaches adopted from the econometric literature. From 302 treatment events and 1569 distinct treatment polygons we found evidence that treatments reduced tree cover and largely increased shrub and perennial herbaceous cover for 10 or more years. However, treatments were also associated with increases in annual, likely non-native, herbaceous cover . Importantly, we noted treatment outcomes varied by landscape context, with some soil and geomorphic settings exhibiting consistent returns to pre-treatment conditions within 10–15 years, and others exhibiting more persistent changes in functional type composition. Despite the overall trends we observed, there was considerable unexplained variability in outcomes from treatment to treatment, highlighting the need for caution and attention to local geomorphic and biological context in planning future treatments.

Arizona, Colorado, New Mexico, Utah↗

USGS2015

Baseline and premining geochemical characterization of mined sites

A rational goal for environmental restoration of new, active, or inactive mine sites would be ‘natural background’ or the environmental conditions that existed before any mining activities or other related anthropogenic activities. In a strictly technical sense, there is no such thing as natural background (or entirely non-anthropogenic) existing today because there is no part of the planet earth that has not had at least some chemical disturbance from anthropogenic activities. Hence, the terms ‘baseline’ and ‘pre-mining’ are preferred to describe these conditions. Baseline conditions are those that existed at the time of the characterization which could be pre-mining, during mining, or post-mining. Protocols for geochemically characterizing pre-mining conditions are not well-documented for sites already mined but there are two approaches that seem most direct and least ambiguous. One is characterization of analog sites along with judicious application of geochemical modeling. The other is reactive-transport modeling (based on careful synoptic sampling with tracer-injection) and subtracting inputs from known mining and mineral processing. Several examples of acidic drainage are described from around the world documenting the range of water compositions produced from pyrite oxidation in the absence of mining. These analog sites provide insight to the processes forming mineralized waters in areas untouched by mining. Natural analog water-chemistry data is compared with the higher metal concentrations, metal fluxes, and weathering rates found in mined areas in the few places where comparisons are possible. The differences are generally 1–3 orders of magnitude higher for acid mine drainage.

Applied Geochemistry↗

USGS2024

Metal mobilization from thawing permafrost to aquatic ecosystems is driving rusting of Arctic streams

Climate change in the Arctic is altering watershed hydrologic processes and biogeochemistry. Here, we present an emergent threat to Arctic watersheds based on observations from 75 streams in Alaska’s Brooks Range that recently turned orange, reflecting increased loading of iron and toxic metals. Using remote sensing, we constrain the timing of stream discoloration to the last 10 years, a period of rapid warming and snowfall, suggesting impairment is likely due to permafrost thaw. Thawing permafrost can foster chemical weathering of minerals, microbial reduction of soil iron, and groundwater transport of metals to streams. Compared to clear reference streams, orange streams have lower pH, higher turbidity, and higher sulfate, iron, and trace metal concentrations, supporting sulfide mineral weathering as a primary mobilization process. Stream discoloration was associated with dramatic declines in macroinvertebrate diversity and fish abundance. These findings have considerable implications for drinking water supplies and subsistence fisheries in rural Alaska.

Alaska↗

USGS2014

Mineralogical, chemical and K-Ar isotopic changes in Kreyenhagen Shale whole rocks and <2 µm clay fractions during natural burial and hydrous-pyrolysis experimental maturation

Progressive maturation of the Eocene Kreyenhagen Shale from the San Joaquin Basin of California was studied by combining mineralogical and chemical analyses with K–Ar dating of whole rocks and <2 μm clay fractions from naturally buried samples and laboratory induced maturation by hydrous pyrolysis of an immature outcrop sample. The K–Ar age decreases from 89.9 ± 3.9 and 72.4 ± 4.2 Ma for the outcrop whole rock and its <2 μm fraction, respectively, to 29.7 ± 1.5 and 21.0 ± 0.7 Ma for the equivalent materials buried to 5167 m. The natural maturation does not produce K–Ar ages in the historical sense, but rather K/Ar ratios of relative K and radiogenic 40 Ar amounts resulting from a combined crystallization of authigenic and alteration of initial detrital K-bearing minerals of the rocks. The Al/K ratio of the naturally matured rocks is essentially constant for the entire depth sequence, indicating that there is no detectable variation in the crystallo-chemical organization of the K-bearing alumino-silicates with depth. No supply of K from outside of the rock volumes occurred, which indicates a closed-system behavior for it. Conversely, the content of the total organic carbon (TOC) content decreases significantly with burial, based on the progressive increasing Al/TOC ratio of the whole rocks. The initial varied mineralogy and chemistry of the rocks and their <2 μm fractions resulting from differences in detrital sources and depositional settings give scattered results that homogenize progressively during burial due to increased authigenesis, and concomitant increased alteration of the detrital material. Hydrous pyrolysis was intended to alleviate the problem of mineral and chemical variations in initially deposited rocks of naturally matured sequences. However, experiments on aliquots from thermally immature Kreyenhagen Shale outcrop sample did not mimic the results from naturally buried samples. Experiments conducted for 72 h at temperatures from 270 to 365 °C did not induce significant changes at temperatures above 310 °C in the mineralogical composition and K–Ar ages of the rock and <2 μm fraction. The K–Ar ages of the <2 μm fraction range from 72.4 ± 4.2 Ma in the outcrop sample to 62.4 ± 3.4 Ma in the sample heated the most at 365 °C for 216 h. This slight decrease in age outlines some loss of radiogenic 40 Ar, together with losses of organic matter as oil, gas, and aqueous organic species. Large amounts of smectite layers in the illite–smectite mixed layers of the pyrolyzed outcrop <2 μm fraction remain during thermal experiments, especially above 310 °C. With no illitization detected above 310 °C, smectite appears to have inhibited rather than promoted generation of expelled oil from decomposition of bitumen. This hindrance is interpreted to result from bitumen impregnating the smectite interlayer sites and rock matrix. Bitumen remains in the <2 μm fraction despite leaching with H 2 O 2 . Its presence in the smectite interlayers is apparent by the inability of the clay fraction to fully expand or collapse once bitumen generation from the thermal decomposition of the kerogen is completed, and by almost invariable K–Ar ages confirming for the lack of any K supply and/or radiogenic 40 Ar removal. This suggests that once bitumen impregnates the porosity of a progressively maturing source rock, the pore system is no longer wetted by water and smectite to illite conversion ceases. Experimental attempts to evaluate the smectite conversion to illite should preferentially use low-TOC rocks to avoid inhibition of the reaction by bitumen impregnation.

California↗

USGS2019

Return flows from beaver ponds enhance floodplain-to-river metals exchange in alluvial mountain catchments

River to floodplain hydrologic connectivity is strongly enhanced by beaver- ( Castor canadensis ) engineered channel water diversions. The hydroecological impacts are wide ranging and generally positive, however, the hydrogeochemical characteristics of beaver-induced flowpaths have not been thoroughly examined. Using a suite of complementary ground- and drone-based heat tracing and remote sensing methodology we characterized the physical template of beaver-induced floodplain exchange for two alluvial mountain streams near Crested Butte, Colorado, USA. A flowpath-oriented perspective to water quality sampling allowed characterization of the chemical evolution of channel water diverted through floodplain beaver ponds and ultimately back to the channel in ‘beaver pond return flows’. Subsurface return flow seepages were universally suboxic, while ponds and surface return flows showed a range of oxygen concentration due to in-situ photosynthesis and atmospheric mixing. Median concentrations of reduced metals: manganese (Mn), iron (Fe), aluminum (Al), and arsenic (As) were substantially higher along beaver-induced flowpaths than in geologically controlled seepages and upstream main channel locations. The areal footprint of reduced return seepage flowpaths were imaged with surface electromagnetic methods, indicating extensive zones of high-conductivity shallow groundwater flowing back toward the main channels and emerging at relatively warm bank seepage zones observed with infrared. Multiple-depth redox dynamics within one focused seepage zone showed coupled variation over time, likely driven by observed changes in seepage rate that may be controlled by pond stage. High-resolution times series of dissolved Mn and Fe collected downstream of the beaver-impacted reaches demonstrated seasonal dynamics in mixed river metal concentrations. Al time series concentrations showed proportional change to Fe at the smaller stream location, indicating chemically reduced flowpaths were sourcing Al to the channel. Overall our results indicated beaver-induced floodplain exchanges create important, and perhaps dominant, transport pathways for floodplain metals by expanding chemically-reduced zones paired with strong advective exchange.

Colorado↗

USGS2006

Integration of coral reef ecosystem process studies and remote sensing

Worldwide, local-scale anthropogenic stress combined with global climate change is driving shifts in the state of reef benthic communities from coral-rich to micro- or macroalgal-dominated (Knowlton, 1992; Done, 1999). Such phase shifts in reef benthic communities may be either abrupt or gradual, and case studies from diverse ocean basins demonstrate that recovery, while uncertain (Hughes, 1994), typically involves progression through successional stages (Done, 1992). These transitions in benthic community structure involve changes in community metabolism, and accordingly, the holistic evaluation of associated biogeochemical variables is of great intrinsic value (Done, 1992). Effective reef management requires advance prediction of coral reef alteration in the face of anthropogenic stress and change in the global environment (Hatcher, 1997a). In practice, this goal requires techniques that can rapidly discern, at an early stage, sublethal effects that may cause long-term increases in mortality (brown, 1988; Grigg and Dollar, 1990). Such methods would improve our understanding of the differences in the population, community, and ecosystem structure, as well as function, between pristine and degraded reefs. This knowledge base could then support scientifically based management strategies (Done, 1992). Brown (1988) noted the general lack of rigor in the assessment of stress on coral reefs and suggested that more quantitative approaches than currently exist are needed to allow objective understanding of coral reef dynamics. Sensitive techniques for the timely appraisal of pollution effects or generalized endemic stress in coral reefs are sorely lacking (Grigg and Dollar, 1990; Wilkinsin, 1992). Moreover, monitoring methods based on population inventories, sclerochronology, or reproductive biology tend to myopic and may give inconsistent results. Ideally, an improved means of evaluating reef stress would discriminate mortality due to natural causes from morality to anthropogenic causes (Brown, 1988). Models of coral reef ecosystems, parameterized by process measurements and scaled in time-space using remote sensing, have the potential to address pressing research questions that are central to devising valid management strategies (Grigg el al., 1984; Hatcher, 1997b). To attain this goal, ecosystem-level models that integrate studies of physical and chemical forcing with observed biological and geological responses are required. This interdisciplinary approach to understanding reef biogeochemical dynamics can allow investigations that integrate the scales of time and space (Hatcher, 1997a), thereby enabling prediction of coral reef change (Andréfouët and Payri, 2001). In turn, prediction of holistic ecosystem function within various environmental focusing scenarios has substantial promise in mitigating future disturbance. Indeed, management of coral reefs at the ecosystem level has been suggested as the only meaningful approach to preserving coral reefs (Bohnsack and Ault, 1996; Christensen et al., 1996).

Florida↗

USGS2023

Interaction of a legacy groundwater contaminant plume with the Little Wind River from 2015 through 2017, Riverton Processing site, Wyoming

The Riverton Processing site was a uranium mill 4 kilometers southwest of Riverton, Wyoming, that prepared uranium ore for nuclear reactors and weapons from 1958 to 1963. The U.S. Department of Energy completed surface remediation of the uranium tailings in 1989; however, groundwater below and downgradient from the tailings site and nearby Little Wind River was not remediated. Beginning in 2010, a series of floods along the Little Wind River began to mobilize contaminants in the unsaturated zone, resulting in substantial increases of uranium and other contaminants of concern in monitoring wells completed inside the contaminant plume. In 2011, the U.S. Department of Energy started a series of university and Government agency retrospective and field investigations to understand the processes controlling contaminant increases in the groundwater plume. The goals of the field investigations described in this report were to (1) identify and quantify the contaminant flux and potential associated biological effects from groundwater associated with the legacy plume as it enters a perennial stream reach, and (2) assess chemical exposure and potential effects to biological receptors from the interaction of the contaminant plume and the river. Field investigations along the Little Wind River were completed by the U.S. Geological Survey during 2015–17 in cooperation with the U.S. Department of Energy Office of Legacy Management to characterize: (1) seepage areas and seepage rates; (2) pore-water and bed sediment chemistry and hyporheic exchange and reactive loss; and (3) exposure pathways and biological receptors. All data collected during the study are contained in two U.S. Geological Survey data releases, available at https://doi.org/10.5066/F7BR8QX4 and https://doi.org/10.5066/P9J9VJBR . A variety of tools and methods were used during the field characterizations. Streambed temperature mapping, electrical resistivity tomography, electromagnetic induction, fiber-optic distributed temperature sensing, tube seepage meters, vertical thermal sensor arrays, and an environmental tracer (radon) were used to identify areas of groundwater seepage and associated seepage rates along specific sections of the study reach of the river. Drive points, minipiezometers, diffusive equilibrium in thin-film/diffusive gradients in thin-film probes, bed-sediment samples, and equal discharge increment sampling methods were used to characterize pore-water chemistry, estimate hyporheic exchange and reactive loss of selected chemical constituents, and quantify contaminant loadings entering the study reach. Sampling and analysis of surface sediments, filamentous algae, periphytic algae, and macroinvertebrates were used to characterize biological exposure pathways, metal uptake, and receptors. Areas of focused groundwater discharge identified by the fiber-optic distributed temperature sensing surveys corresponded closely with areas of elevated electrical conductivity identified by the electromagnetic induction survey results in the top 5 meters of sediment. During three monitoring periods in 2016, the mean vertical seepage rate measured with tube seepage meters was 0.45 meter per day, ranging from −0.02 to 1.55 meters per day. Five of the 11 locations where vertical thermal profile data were collected along the study reach during August 2017 indicated mean upwelling values ranging from 0.11 to 0.23 meter per day. Radon data collected from the Little Wind River during June, July, and August 2016 indicated a consistent inflow of groundwater to the central part of the study reach, in the area congruous with the center of the previously mapped groundwater plume discharge zone. During August 2017, the greatest attenuation of uranium from reactive loss in pore-water samples was observed at three locations along the study reach, at depths between 6 and 15 centimeters, and similar trends in molybdenum attenuation were also observed. Bed-sediment concentration profiles collected during 2017 also indicated attenuation of uranium and molybdenum from groundwater during hyporheic mixing of surface water with the legacy plume during groundwater upwelling into the river. Streamflow measurements combined with equal discharge increment water sampling along the study reach indicated an increase in dissolved uranium concentrations in the downstream direction during 2016 and 2017. Net uranium load entering the Little Wind River study reach was about 290 and 435 grams per day during 2016 and 2017, respectively. Biological samples indicated that low levels of uranium and molybdenum exposure were confined to the benthos in the Little Wind River within and immediately downstream from the perimeter of the groundwater plume. Concentrations of molybdenum and uranium in filamentous algae were consistently low at all sites in the study reach with no indication of increased exposure of dissolved bioavailable molybdenum or uranium at sites next to or downstream from the groundwater plume. Comparison of the August 2017 results from electromagnetic induction, tube seepage meters, vertical thermal profiling, and pore-water chemistry surveys were in general agreement in identifying areas with upwelling groundwater conditions along the study reach. However, the electroconductivity values measured with electromagnetic induction in the top 100 centimeters of sediment did not agree with sodium concentrations measured in pore-water samples collected at similar streambed depths. Differences and similarities between multiple methods can result in additional insights into hydrologic and biogeochemical processes that may be occurring along a reach of a river system interacting with shallow groundwater inputs. It may be advantageous to apply a variety of geophysical, geochemical, hydrologic, and biological tools at other Uranium Mill Tailings Remedial Action ( https://www.energy.gov/sites/prod/files/2014/10/f19/UMTRCA.pdf ) sites during the investigation of legacy contaminant plume interactions with surface-water systems.

Wyoming↗

USGS2016

Silicic lunar volcanism: Testing the crustal melting model

Lunar silicic rocks were first identified by granitic fragments found in samples brought to Earth by the Apollo missions, followed by the discovery of silicic domes on the lunar surface through remote sensing. Although these silicic lithologies are thought to make up a small portion of the lunar crust, their presence indicates that lunar crustal evolution is more complex than originally thought. Models currently used to describe the formation of silicic lithologies on the Moon include in situ differentiation of a magma, magma differentiation with silicate liquid immiscibility, and partial melting of the crust. This study focuses on testing a crustal melting model through partial melting experiments on compositions representing lithologies spatially associated with the silicic domes. The experiments were guided by the results of modeling melting temperatures and residual melt compositions of possible protoliths for lunar silicic rocks using the thermodynamic modeling software, rhyolite-MELTS. Rhyolite-MELTS simulations predict liquidus temperatures of 950–1040 °C for lunar granites under anhydrous conditions, which guided the temperature range for the experiments. Monzogabbro, alkali gabbronorite, and KREEP basalt were identified as potential protoliths due to their ages, locations on the Moon (i.e., located near observed silicic domes), chemically evolved compositions, and the results from rhyolite-MELTS modeling. Partial melting experiments, using mixtures of reagent grade oxide powders representing bulk rock compositions of these rock types, were carried out at atmospheric pressure over the temperature range of 900–1100 °C. Because all lunar granite samples and remotely sensed domes have an elevated abundance of Th, some of the mixtures were doped with Th to observe its partitioning behavior. Run products show that at temperatures of 1050 and 1100 °C, melts of the three protoliths are not silicic in nature (i.e., they have <63 wt% SiO 2 ). By 1000 °C, melts of both monzogabbro and alkali gabbronorite approach the composition of granite, but are also characterized by immiscible Si-rich and Fe-rich liquids. Furthermore, Th strongly partitions into the Fe-rich, and not the Si-rich glass in all experimental runs. Our work provides important constraints on the mechanism of silicic melt formation on the Moon. The observed high-Th content of lunar granite is difficult to explain by silicate liquid immiscibility, because through this process, Th is not fractionated into the Si-rich phase. Results of our experiments and modeling suggests that silicic lunar rocks could be produced from monzogabbro and alkali gabbronorite protoliths by partial melting at T < 1000 °C. Additionally, we speculate that at higher pressures ( P ≥ 0.005 GPa), the observed immiscibility in the partial melting experiments would be suppressed.

American Mineralogist↗

USGS2021

Earthquakes indicated magma viscosity during Kīlauea’s 2018 eruption

Magma viscosity strongly controls the style (for example, explosive versus effusive) of a volcanic eruption and thus its hazard potential, but can only be measured during or after an eruption. The identification of precursors indicative of magma viscosity would enable forecasting of the eruption style and the scale of associated hazards 1 . The unanticipated May 2018 rift intrusion and eruption of Kīlauea Volcano, Hawai‘i 2 displayed exceptional chemical and thermal variability in erupted lavas, leading to unpredictable effusion rates and explosivity. Here, using an integrated analysis of seismicity and magma rheology, we show that the orientation of fault-plane solutions (which indicate a fault’s orientation and sense of movement) for earthquakes preceding and accompanying the 2018 eruption indicate a 90-degree local stress-field rotation from background, a phenomenon previously observed only at high-viscosity eruptions 3 , and never before at Kīlauea 4,5,6,7,8 . Experimentally obtained viscosities for 2018 products and earlier lavas from the Pu‘u ‘Ō‘ō vents tightly constrain the viscosity threshold required for local stress-field reorientation. We argue that rotated fault-plane solutions in earthquake swarms at Kīlauea and other volcanoes worldwide provide an early indication that unrest involves magma of heightened viscosity, and thus real-time monitoring of the orientations of fault-plane solutions could provide critical information about the style of an impending eruption. Furthermore, our results provide insight into the fundamental nature of coupled failure and flow in complex multiphase systems.

Hawaii↗

USGS2017

Optical and biochemical properties of a southwest Florida whiting event

“Whiting” in oceanography is a term used to describe a sharply defined patch of water that contains high levels of suspended, fine-grained calcium carbonate (CaCO 3 ). Whitings have been reported in many oceanic and lake environments, and recently have been reported in southwest Florida coastal waters. Here, field and laboratory measurements were used to study optical, biological, and chemical properties of whiting waters off southwest Florida. No significant difference was found in chlorophyll a concentrations between whiting and outside waters (non-whiting water), but average particle backscattering coefficients in whiting waters were double those in outside waters, and remote sensing reflectance in whiting waters was higher at all wavelengths (400–700 nm). While other potential causes cannot be completely ruled out, particle composition and biochemical differences between sampled whiting water, contiguous water, and outside water indicate a biologically precipitated mode of whiting formation. Taxonomic examination of marine phytoplankton samples collected during a whiting event revealed a community dominated by autotrophic picoplankton and a small (<10 μm), centric diatom species, identified as Thalassiosira sp. through the use of scanning electron microscopy. Amorphous to fully formed crystals of CaCO 3 were observed along the girdle bands of Thalassiosira sp. cells and autotrophic picoplankton cells. Although carbonate parameters differed from whiting and contiguous to outside water, more sampling is needed to determine if these results are statistically significant.

Florida↗

USGS1995

Making sense of soil ecotoxicology

The toxicity of pesticides and environmental contaminants to soil organisms has been measured in studies on earthworms, 1 soil arthropods, 3-6 soil microorganisms, 7 and other soil organisms. 8 Toxicity data on earthworms produced in the pesticide registration procedure required by the OECD (Organization for economic cooperation and Development) will provide data on many additional chemicals. 9 Deciding how to use the data generated is troublesome. In 1965, Edwards 10 suggested that the effects of soil insecticides on soils may remain long after the pesticides have disappeared, and that it was clear that pesticides could drastically change the populations of soil organisms; Edwards noted, however, that the effects did not seem to be serious when compared with the benefits to crop production of using pesticides. Since 1965, many studies have been conducted on changes in soil ecosystems caused by environmental contaminants, but we still know little about what the toxicity to particular groups of soil organisms means to the functioning of the soil ecosystem. the problem was illustrated in discussions at the International Conference on Earthworm Ecotoxicology in Sheffield, England, in 1991. there was general agreement that earthworms ahould be taken into account when evaluating pesticides. However, it was unclear what level of reduction in earthworm populations would reduce soil quality or crop yeild. Because populations of earthworms naturally fluctuate greatly even in the absence of pesticides, and because some soils are fertile without any earthworms, it is difficult to equate their population decreases with damage to the soil ecosystem. Broadbent and Tomlin found that the insecticide carbofuran caused fluctuations in the populations of some microarthropods in a cornfield but, in comparing the effects to those of cultivation or adding compost, they concluded that it was unlikely that litter decomposition was significantly affected. 3

Book chapter↗

USGS2001

Environmental studies of the World Trade Center area after the September 11, 2001 attack

This web site describes the results of an interdisciplinary environmental characterization of the World Trade Center (WTC) area after September 11, 2001. Information presented in this site was first made available to the World Trade Center emergency response teams on September 18, 2001 (Thermal hot spot information), and September 27, 2001 (maps and compositional results). The Airborne Visible / Infrared Imaging Spectrometer (AVIRIS), a hyperspectral remote sensing instrument, was flown by JPL/NASA over the World Trade Center (WTC) area on September 16, 18, 22, and 23, 2001 ( Link to the AVIRIS JPL data facility) . A 2-person USGS crew collected samples of dusts and airfall debris from more than 35 localities within a 1-km radius of the World trade Center site on the evenings of September 17 and 18, 2001. Two samples were collected of indoor locations that were presumably not affected by rainfall (there was a rainstorm on September 14). Two samples of material coating a steel beam in the WTC debris were also collected. The USGS ground crew also carried out on-the-ground reflectance spectroscopy measurements during daylight hours to field calibrate AVIRIS remote sensing data. Radiance calibration and rectification of the AVIRIS data were done at JPL/NASA. Surface reflectance calibration, spectral mapping, and interpretation were done at the USGS Imaging Spectroscopy Lab in Denver. The dust/debris and beam-insulation samples were analyzed for a variety of mineralogical and chemical parameters using Reflectance Spectroscopy (RS), Scanning Electron Microscopy (SEM), X-Ray Diffraction (XRD), chemical analysis, and chemical leach test techniques in U.S. Geological Survey laboratories in Denver, Colorado.

New York↗

USGS2017

A newly identified role of the deciduous forest floor in the timing of green‐up

Plant phenology studies rarely consider controlling factors other than air temperature. We evaluate here the potential significance of physical and chemical properties of soil (edaphic factors) as additional important controls on phenology. More specifically, we investigate causal connections between satellite‐observed green‐up dates of small forest watersheds and soil properties in the Adirondack Mountains of New York, USA. Contrary to the findings of previous studies, where edaphic controls of spring phenology were found to be marginal, our analyses show that at least three factors manifest themselves as significant controls of seasonal patterns of variation in vegetated land surfaces observed from remote sensing: (1) thickness of the forest floor, (2) concentration of exchangeable soil potassium, and (3) soil acidity. For example, a thick forest floor appears to delay the onset of green‐up. Watersheds with elevated concentrations of potassium are associated with early surface greening. We also found that trees growing in strongly acidified watersheds demonstrate delayed green‐up dates. Overall, our work demonstrates that, at the scale of small forest watersheds, edaphic factors can explain a significant percentage of the observed spatial variation in land surface phenology that is comparable to the percentage that can be explained by climatic and landscape factors. We conclude that physical and chemical properties of forest soil play important roles in forest ecosystems as modulators of climatic drivers controlling the rate of spring soil warming and the transition of trees out of winter dormancy.

New York↗

USGS2013

Landsat imagery reveals declining clarity of Maine’s lakes during 1995-2010

Water clarity is a strong indicator of regional water quality. Unlike other common water-quality metrics, such as chlorophyll a , total P, or trophic status, clarity can be accurately and efficiently estimated remotely on a regional scale. Satellite-based remote sensing is useful in regions with many lakes where traditional field-sampling techniques may be prohibitively expensive. Repeated sampling of easily accessed lakes can lead to spatially irregular, nonrandom samples of a region. Remote sensing remedies this problem. We applied a remote monitoring protocol we had previously developed for Maine lakes >8 ha based on Landsat satellite data recorded during 1995–2010 to identify spatial and temporal patterns in Maine lake clarity. We focused on the overlapping region of Landsat paths 11 and 12 to increase availability of cloud-free images in August and early September, a period of relative lake stability and seasonal poor-clarity conditions well suited for annual monitoring. We divided Maine into 3 regions (northeastern, south-central, western) based on morphometric and chemical lake features. We found a general decrease in average statewide lake clarity from 4.94 to 4.38 m during 1995–2010. Water clarity ranged from 4 to 6 m during 1995–2010, but it decreased consistently during 2005–2010. Clarity in both the northeastern and western lake regions has decreased from 5.22 m in 1995 to 4.36 and 4.21 m, respectively, in 2010, whereas lake clarity in the south-central lake region (4.50 m) has not changed since 1995. Climate change, timber harvesting, or watershed morphometry may be responsible for regional water-clarity decline. Remote sensing of regional water clarity provides a more complete spatial perspective of lake water quality than existing, interest-based sampling. However, field sampling done under existing monitoring programs can be used to calibrate accurate models designed to estimate water clarity remotely.

Maine↗

USGS1904

The superior analyses of igneous rocks from Roth's Tabellen, 1869 to 1884, arranged according to the quantitative system of classification

In Professional Paper No. 14 there were collected the chemical analyses of igneous rocks published from 1884 to 1900, inclusive, arranged according to the quantitative system of classification recently proposed by Cross, Iddings, Pirsson, and Washington. In order to supplement this work it has appeared advisable to select the more reliable and complete of the earlier analyses collected by Justus Roth and arrange them also in the same manner for publication. Petrographers would thus have available for use according to the new system almost the entire body of chemical work of real value on igneous rocks, the exceptions being a few analyses published prior to 1900 which may have been overlooked by both Roth and myself. The two collections would form a foundation as broad as possible for future research and discussion. I must express my sense of obligation to the United States Geological Survey for publishing the present collection of analyses, and my thanks to my colleagues in the new system of classification for their friendly advice and assistance.

Professional Paper↗