Search USGS⌕ Search

SEARCH · Search USGS

Results for “Interfaces”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14Linked to original sources
USGS2014

Hydrologic conditions in urban Miami-Dade County, Florida, and the effect of groundwater pumpage and increased sea level on canal leakage and regional groundwater flow

The extensive and highly managed surface-water system in southeastern Florida constructed during the 20th Century has allowed for the westward expansion of urban and agricultural activities in Miami-Dade County. In urban areas of the county, the surface-water system is used to (1) control urban flooding, (2) supply recharge to production well fields, and (3) control seawater intrusion. Previous studies in Miami-Dade County have determined that on a local scale, leakage from canals adjacent to well fields can supply a large percentage (46 to 78 percent) of the total groundwater pumpage from production well fields. Canals in the urban areas also receive seepage from the Biscayne aquifer that is derived from a combination of local rainfall and groundwater flow from Water Conservation Area 3 and Everglades National Park, which are west of urban areas of Miami-Dade County. To evaluate the effects of groundwater pumpage on canal leakage and regional groundwater flow, the U.S. Geological Survey (USGS) developed and calibrated a coupled surface-water/groundwater model of the urban areas of Miami-Dade County, Florida. The model was calibrated by using observation data collected from January 1997 through December 2004. The model calibration was verified using observation data collected from January 2005 through December 2010. A 1-year warmup period (January 1996 through December 1996) was added prior to the start of the calibration period to reduce the effects of inaccurate initial conditions on model calibration. The model is designed to simulate surface-water stage and discharge in the managed canal system and dynamic canal leakage to the Biscayne aquifer as well as seepage to the canal from the aquifer. The model was developed using USGS MODFLOW–NWT with the Surface-Water Routing (SWR1) Process to simulate surface-water stage, surface-water discharge, and surface-water/groundwater interaction and the Seawater Intrusion (SWI2) Package to simulate seawater intrusion, respectively. Automated parameter estimation software (PEST) and highly parameterized inversion techniques were used to calibrate the model to observed surface-water stage, surface-water discharge, net surface-water subbasin discharge, and groundwater level data from 1997 through 2004 by modifying hydraulic conductivity, specific storage coefficients, specific yield, evapotranspiration parameters, canal roughness coefficients (Manning’s n values), and canal leakance coefficients. Tikhonov regularization was used to produce parameter distributions that provide an acceptable fit between model outputs and observation data, while simultaneously minimizing deviations from preferred values based on field measurements and expert knowledge. Analytical and simulated water budgets for the period from 1996 through 2010 indicate that most of the water discharging through the salinity control structures is derived from within the urban parts of the study area and that, on average, the canals are draining the Biscayne aquifer. Simulated groundwater discharge from the urban areas to the coast is approximately 7 percent of the total surface-water inflow to Biscayne Bay and is consistent with previous estimates of fresh groundwater discharge to Biscayne Bay. Simulated groundwater budgets indicate that groundwater pumpage in some surface-water basins ranges from 13 to 27 percent of the sum of local sources of groundwater inflow. The largest percentage of groundwater pumpage to local sources of groundwater inflow occurs in the basins that have the highest pumping rates (C–2 and C–100 Basins). The ratio of groundwater pumpage to simulated local sources of groundwater inflow is less than values calculated in previous local-scale studies. The position of the freshwater-seawater interface at the base of the Biscayne aquifer did not change notably during the simulation period (1996–2010), consistent with the similar positions of the interface in 1984, 1995, and 2011 under similar hydrologic and groundwater pumping conditions. Landward movement of the freshwater-seawater interface above the base of the aquifer is more prone to occur during relatively dry years. The model was used to evaluate the effect of increased groundwater pumpage and (or) increased sea level on canal leakage, regional groundwater flow, and the position of the freshwater-seawater interface. Permitted groundwater pumping rates, which generally exceed historical groundwater pumping rates, were used for Miami-Dade County Water and Sewer Department groundwater pumping wells in the base-case future scenario. Base-case future and increased pumping scenario results suggest seawater intrusion may occur at the Miami-Springs well field if the Miami Springs, Hialeah, and Preston well fields are operated using current permitted groundwater pumping rates. Scenario simulations also show that, in general, the canal system limits the adverse effects of proposed groundwater pumpage increases on water-level changes and saltwater intrusion. Proposed increases (up to a 7 percent increase) in groundwater pumpage do not have a notable effect on movement of the freshwater-seawater interface. Increased groundwater pumpage increased lateral groundwater inflow into basins subject to additional groundwater pumpage; however, most (55 percent) of the additional groundwater extracted from pumping wells was supplied by changes in canal seepage and leakage in urban areas of the model. Increased sea level caused increased water-table elevations in urban areas and decreased hydraulic gradients across the system; the largest increases in water-table elevations occurred seaward of the salinity control structures. The extent of flood-prone areas and the percentage of time water-table elevations in flood-prone areas were less than 0.5 foot below land surface increased with increased sea level. Increased sea level also resulted in landward migration of the freshwater-seawater interface; the largest changes in the position of the interface occurred seaward of the salinity control structures except in parts of the model area that were inundated by increased sea level. Decreased water-table gradients reduced groundwater inflow, groundwater outflow, canal exchanges, surface-water inflow, and surface-water outflow through salinity control structures. Results for the scenario that evaluated the combination of increased groundwater pumpage and increased sea level did not differ substantially from the scenario that evaluated increased sea level alone. Groundwater inflow, groundwater outflow, and canal exchanges were reduced in urban areas of the study area as a result of decreased water-table gradients across the system, although reductions were less than those in the increased sea-level scenario. The decline in groundwater levels caused by increased groundwater pumpage was less under the increased sea-level scenario than under the increased groundwater-pumpage scenario. The largest reductions in surface-water outflow from the salinity control structures occurred with increased sea level and increased groundwater pumpage. The model was designed specifically to evaluate the effect of groundwater pumpage on canal leakage at the surface-water-basin scale and thus may not be appropriate for (1) predictions that are dependent on data not included in the calibration process (for example, subdaily simulation of high-intensity events and travel times) and (or) (2) hydrologic conditions that are substantially different from those during the calibration and verification periods. The reliability of the model is limited by the conceptual model of the surface-water and groundwater system, the spatial distribution of physical properties, the scale and discretization of the system, and specified boundary conditions. Some of the model limitations are manifested in model errors. Despite these limitations, however, the model represents the complexities of the interconnected surface-water and groundwater systems that affect how the systems respond to groundwater pumpage, sea-level rise, and other hydrologic stresses. The model also quantifies the relative effects of groundwater pumpage and sea-level rise on the surface-water and groundwater systems.

Florida↗
USGS2004

The rotating movement of three immiscible fluids - A benchmark problem

A benchmark problem involving the rotating movement of three immiscible fluids is proposed for verifying the density-dependent flow component of groundwater flow codes. The problem consists of a two-dimensional strip in the vertical plane filled with three fluids of different densities separated by interfaces. Initially, the interfaces between the fluids make a 45??angle with the horizontal. Over time, the fluids rotate to the stable position whereby the interfaces are horizontal; all flow is caused by density differences. Two cases of the problem are presented, one resulting in a symmetric flow field and one resulting in an asymmetric flow field. An exact analytical solution for the initial flow field is presented by application of the vortex theory and complex variables. Numerical results are obtained using three variable-density groundwater flow codes (SWI, MOCDENS3D, and SEAWAT). Initial horizontal velocities of the interfaces, as simulated by the three codes, compare well with the exact solution. The three codes are used to simulate the positions of the interfaces at two times; the three codes produce nearly identical results. The agreement between the results is evidence that the specific rotational behavior predicted by the models is correct. It also shows that the proposed problem may be used to benchmark variable-density codes. It is concluded that the three models can be used to model accurately the movement of interfaces between immiscible fluids, and have little or no numerical dispersion. ?? 2003 Elsevier B.V. All rights reserved.

Journal of Hydrology↗
USGS2007

Non-volcanic tremor driven by large transient shear stresses

Non-impulsive seismic radiation or 'tremor' has long been observed at volcanoes and more recently around subduction zones. Although the number of observations of non-volcanic tremor is steadily increasing, the causative mechanism remains unclear. Some have attributed non-volcanic tremor to the movement of fluids, while its coincidence with geodetically observed slow-slip events at regular intervals has led others to consider slip on the plate interface as its cause. Low-frequency earthquakes in Japan, which are believed to make up at least part of non-volcanic tremor, have focal mechanisms and locations that are consistent with tremor being generated by shear slip on the subduction interface. In Cascadia, however, tremor locations appear to be more distributed in depth than in Japan, making them harder to reconcile with a plate interface shear-slip model. Here we identify bursts of tremor that radiated from the Cascadia subduction zone near Vancouver Island, Canada, during the strongest shaking from the moment magnitude Mw = 7.8, 2002 Denali, Alaska, earthquake. Tremor occurs when the Love wave displacements are to the southwest (the direction of plate convergence of the overriding plate), implying that the Love waves trigger the tremor. We show that these displacements correspond to shear stresses of approximately 40 kPa on the plate interface, which suggests that the effective stress on the plate interface is very low. These observations indicate that tremor and possibly slow slip can be instantaneously induced by shear stress increases on the subduction interface - effectively a frictional failure response to the driving stress. ??2007 Nature Publishing Group.

Nature↗
USGS1999

Geostatistical applications in ground-water modeling in south-central Kansas

This paper emphasizes the supportive role of geostatistics in applying ground-water models. Field data of 1994 ground-water level, bedrock, and saltwater-freshwater interface elevations in south-central Kansas were collected and analyzed using the geostatistical approach. Ordinary kriging was adopted to estimate initial conditions for ground-water levels and topography of the Permian bedrock at the nodes of a finite difference grid used in a three-dimensional numerical model. Cokriging was used to estimate initial conditions for the saltwater-freshwater interface. An assessment of uncertainties in the estimated data is presented. The kriged and cokriged estimation variances were analyzed to evaluate the adequacy of data employed in the modeling. Although water levels and bedrock elevations are well described by spherical semivariogram models, additional data are required for better cokriging estimation of the interface data. The geostatistically analyzed data were employed in a numerical model of the Siefkes site in the project area. Results indicate that the computed chloride concentrations and ground-water drawdowns reproduced the observed data satisfactorily.This paper emphasizes the supportive role of geostatistics in applying ground-water models. Field data of 1994 ground-water level, bedrock, and saltwater-freshwater interface elevations in south-central Kansas were collected and analyzed using the geostatistical approach. Ordinary kriging was adopted to estimate initial conditions for ground-water levels and topography of the Permian bedrock at the nodes of a finite difference grid used in a three-dimensional numerical model. Cokriging was used to estimate initial conditions for the saltwater-freshwater interface. An assessment of uncertainties in the estimated data is presented. The kriged and cokriged estimation variances were analyzed to evaluate the adequacy of data employed in the modeling. Although water levels and bedrock elevations are well described by spherical semivariogram models, additional data are required for better cokriging estimation of the interface data. The geostatistically analyzed data were employed in a numerical model of the Siefkes site in the project area. Results indicate that the computed chloride concentrations and ground-water drawdowns reproduced the observed data satisfactorily.

Journal of Hydrologic Engineering↗
USGS2010

Quantifying data worth toward reducing predictive uncertainty

The present study demonstrates a methodology for optimization of environmental data acquisition. Based on the premise that the worth of data increases in proportion to its ability to reduce the uncertainty of key model predictions, the methodology can be used to compare the worth of different data types, gathered at different locations within study areas of arbitrary complexity. The method is applied to a hypothetical nonlinear, variable density numerical model of salt and heat transport. The relative utilities of temperature and concentration measurements at different locations within the model domain are assessed in terms of their ability to reduce the uncertainty associated with predictions of movement of the salt water interface in response to a decrease in fresh water recharge. In order to test the sensitivity of the method to nonlinear model behavior, analyses were repeated for multiple realizations of system properties. Rankings of observation worth were similar for all realizations, indicating robust performance of the methodology when employed in conjunction with a highly nonlinear model. The analysis showed that while concentration and temperature measurements can both aid in the prediction of interface movement, concentration measurements, especially when taken in proximity to the interface at locations where the interface is expected to move, are of greater worth than temperature measurements. Nevertheless, it was also demonstrated that pairs of temperature measurements, taken in strategic locations with respect to the interface, can also lead to more precise predictions of interface movement. Journal compilation ?? 2010 National Ground Water Association.

Ground Water↗
USGS2019

Map of the approximate inland extent of saltwater at the base of the Biscayne aquifer in Miami-Dade County, Florida, 2018

The inland extent of saltwater at the base of the Biscayne aquifer in eastern Miami-Dade County, Florida, was mapped in 2011, and it was mapped in the Model Land Area in 2016. The saltwater interface has continued to move inland in some areas and is now near several active well fields. An updated approximation of the inland extent of saltwater has been created by using data collected during March 8–December 13, 2018, from 111 monitoring wells open to the Biscayne aquifer near its base. Chloride concentrations in water samples from the monitoring wells and bulk conductivity from geophysical logs and measurements of the specific conductance of groundwater were used to approximate the position of the isochlor representing a chloride concentration of 1,000 milligrams per liter (mg/L) at the base of the Biscayne aquifer. An average rate of saltwater interface movement of about 102 meters per year in the Model Land Area along SW 360 Street was estimated from the approximated dates of arrival of the 250-, 500-, and 1,000-mg/L isochlors at wells TPGW-7L (2013–2014) and ACI-MW-05-FS (2017–2018). This estimate assumes that the interface is traveling in a path parallel to an imaginary line connecting the two monitoring wells. Of the 111 wells from which data were used, 80 wells have open intervals of ≤ 4 meters, 20 of the wells have open intervals that range from 4.3 to 39.6 meters, and the lengths of the open intervals could not be determined in 11 wells. Studies have shown that long open intervals might allow water from various depths to mix under ambient or pumped conditions, which in turn could alter the maximum chloride concentration sampled in the well, or it might change the depth at which the maximum specific conductance is measured within a well, relative to its depth in the aquifer. The approximation of the inland extent of the saltwater interface and the estimated rate of movement of the interface are dependent on the quality of existing data. Improved estimates could be obtained by installing uniformly designed monitoring wells in systematic transects extending landward of the advancing saltwater interface. To achieve this goal, Miami-Dade County and some other organizations are routinely adding new monitoring wells with short open intervals and replacing poorly designed or positioned monitoring wells to improve spatial coverage of the network.

Florida↗
USGS2016

Potential effects of alterations to the hydrologic system on the distribution of salinity in the Biscayne aquifer in Broward County, Florida

To address concerns about the effects of water-resource management practices and rising sea level on saltwater intrusion, the U.S. Geological Survey in cooperation with the Broward County Environmental Planning and Community Resilience Division, initiated a study to examine causes of saltwater intrusion and predict the effects of future alterations to the hydrologic system on salinity distribution in eastern Broward County, Florida. A three-dimensional, variable-density solute-transport model was calibrated to conditions from 1970 to 2012, the period for which data are most complete and reliable, and was used to simulate historical conditions from 1950 to 2012. These types of models are typically difficult to calibrate by matching to observed groundwater salinities because of spatial variability in aquifer properties that are unknown, and natural and anthropogenic processes that are complex and unknown; therefore, the primary goal was to reproduce major trends and locally generalized distributions of salinity in the Biscayne aquifer. The methods used in this study are relatively new, and results will provide transferable techniques for protecting groundwater resources and maximizing groundwater availability in coastal areas. The model was used to (1) evaluate the sensitivity of the salinity distribution in groundwater to sea-level rise and groundwater pumping, and (2) simulate the potential effects of increases in pumping, variable rates of sea-level rise, movement of a salinity control structure, and use of drainage recharge wells on the future distribution of salinity in the aquifer. Results from the simulation of historical conditions indicate that the model generally represents the observed greater westward extent of elevated salinity in the central part of the intruded area relative to the northern and southernmost parts of the intruded area. Results of sensitivity testing indicate that the extent of elevated salinity is most sensitive to pumping in areas where the source of saltwater is largely offshore, from the Atlantic Ocean, and is most sensitive to sea-level rise in areas where the source of salinity is downward leakage of brackish water from canals. Simulations of future scenarios indicate that increases in pumping near the existing interface may cause the interface to advance and decreases in pumping may cause it to retreat. Climatic effects, such as periods of prolonged drought or high precipitation, may augment or counteract long-term effects of changes in pumping on aquifer salinity at well fields. With increasing rates of sea-level rise, the freshwater-saltwater interface advances progressively inland, and flow-averaged salinities at well fields near the existing interface increase commensurately. Hypothetical southeastward (downstream) re-positioning of the existing G–54 salinity-control structure may prevent the interface from moving northwestward along and near the North New River canal, but beneficial effects are localized. Implementation of freshwater recharge wells in the city of Hallandale Beach may also have only a localized freshening effect in the aquifer and little appreciable effect on the freshwater-saltwater interface or on concentrations of salinity at well fields. Model accuracy and use are limited by uncertainty in the physical properties and boundary conditions of the system, uncertainty in historical and future conditions, and generalizations made in the mathematical relationships used to describe the physical processes of groundwater flow and transport. Because of these limitations, model results should be considered in relative rather than absolute terms. Nonetheless, model results do provide useful information on the relative scale of response of the system to changes in pumping distribution, sea-level rise, and mitigation activities.

Florida↗
USGS2015

Groundwater – The disregarded component in lake water and nutrient budgets. Part 2: effects of groundwater on nutrients

Lacustrine groundwater discharge (LGD) transports nutrients from a catchment to a lake, which may fuel eutrophication, one of the major threats to our fresh waters. Unfortunately, LGD has often been disregarded in lake nutrient studies. Most measurement techniques are based on separate determinations of volume and nutrient concentration of LGD: Loads are calculated by multiplying seepage volumes by concentrations of exfiltrating water. Typically low phosphorus (P) concentrations of pristine groundwater often are increased due to anthropogenic sources such as fertilizer, manure or sewage. Mineralization of naturally present organic matter might also increase groundwater P. Reducing redox conditions favour P transport through the aquifer to the reactive aquifer-lake interface. In some cases, large decreases of P concentrations may occur at the interface, for example, due to increased oxygen availability, while in other cases, there is nearly no decrease in P. The high reactivity of the interface complicates quantification of groundwater-borne P loads to the lake, making difficult clear differentiation of internal and external P loads to surface water. Anthropogenic sources of nitrogen (N) in groundwater are similar to those of phosphate. However, the environmental fate of N differs fundamentally from P because N occurs in several different redox states, each with different mobility. While nitrate behaves essentially conservatively in most oxic aquifers, ammonium's mobility is similar to that of phosphate. Nitrate may be transformed to gaseous N 2 in reducing conditions and permanently removed from the system. Biogeochemical turnover of N is common at the reactive aquifer-lake interface. Nutrient loads from LGD were compiled from the literature. Groundwater-borne P loads vary from 0.74 to 2900 mg PO 4 -P m −2 year −1 ; for N, these loads vary from 0.001 to 640 g m −2 year −1 . Even small amounts of seepage can carry large nutrient loads due to often high nutrient concentrations in groundwater. Large spatial heterogeneity, uncertain areal extent of the interface and difficult accessibility make every determination of LGD a challenge. However, determinations of LGD are essential to effective lake management.

Hydrological Processes↗
USGS2021

Complexity of groundwater age mixing near a seawater intrusion zone based on multiple tracers and Bayesian inference

Aquifer flow systems near seawater interfaces can be complicated by density-driven flows and the formation of stagnation zones, which inevitably introduces uncertainty into groundwater age-dating. While age-dating has proved effective to understand the seawater intrusion and aquifer salinization process in coastal aquifers, further efforts are needed to propagate model and data uncertainty to the uncertainty associated with the inferred age distributions. This study was performed in a coastal aquifer located close to the Yellow Sea, South Korea, where there is a decreasing trend of groundwater levels due to recent heavy exploitation, raising a warning of induced seawater intrusion. We inferred the groundwater age distributions in wells around the intrusion zone and estimated the uncertainty associated with the inference based on multiple age tracers including 3 H, tritiogenic 3 He, radiogenic 4 He, CFC-11, CFC-12 and CFC-113 using Bayesian inference. We examined various models representing the age distributions including traditional parametric Lumped Parameter Models (LPMs) and two non-parametric “shape-free” models. The results showed that the mean ages at the study site ranged from 10.9 to 522.5 y. Complex, multimodal distributions of ages occurred near a seawater intrusion area and upland recharge zones, implying converging paths of a wide range of different ages in those regions. In particular, the age distributions estimated near the seawater intrusion interface were characterized by heavy-tailed mixing structures with elevated concentrations of 4 He. This likely indicates density-driven upward flow at the seawater intrusion interface, forcing old groundwater rich in 4 He into the shallow aquifer. The Bayesian inference estimated large uncertainties particularly for the old age distributions, which was attributed partly to the gradual accumulation of 4 He in groundwater. The Bayesian inference improved understanding of flow dynamics at a complex seawater interface and identified opportunities to further reduce uncertainty of old water age estimates that characterize upwelling groundwater near the interface.

Jaancheon basin↗
USGS2004

Seismicity and tectonics of El Salvador

The large-scale plate-tectonics framework of El Salvador was defined in the “plate-tectonics revolution” of the 1960s and 1970s, but important issues related to seismic hazards depend on details that have been only recently, or are not yet, understood. Present evidence suggests that coupling across the interface-thrust zone beneath coastal El Salvador is sufficient to produce occasional interface-thrust earthquakes as large as M ∼8. The rate of such earthquakes is determined by the percentage of relative plate motion that is accumulated as elastic strain on the thrust-fault interface between the Cocos and Caribbean plates, which appears to be lower than in many other subduction zones, but is not well established. Earthquakes in the interior of the Cocos plate, such as the El Salvador earthquake of January 13, 2001, account for a significant percentage of Wadati-Benioff zone earthquakes. Separate consideration of the seismic hazard posed by, respectively, Cocos intraplate earthquakes and interface-thrust earthquakes is complicated by the difficulty of separating interface-thrust and Cocos intraplate events in earthquake catalogs. Earthquakes such as the San Vicente–San Salvador sequence of February 13–25, 2001, probably result from the motion of the Central American forearc northwestward with respect to the interior of the Caribbean plate; the geometry of the fault systems that accommodate the motion remains to be worked out. Understanding of this tectonic complexity and associated seismic hazards will be facilitated greatly by the long-term operation of high-sensitivity local seismograph networks, such as that operated by, and currently being upgraded by, the Servicio Nacional de Estudios Territoriales (SNET) of El Salvador.

Special Papers of the Geological Society of Americ↗
USGS2004

Simulated interaction between freshwater and saltwater and effects of ground-water pumping and sea-level change, lower Cape Cod aquifer system, Massachusetts

The U.S. Geological Survey, in cooperation with the National Park Service, Massachusetts Executive Office of Environmental Affairs, Cape Cod Commission, and the Towns of Eastham, Provincetown, Truro, and Wellfleet, began an investigation in 2000 to improve the understanding of the hydrogeology of the four freshwater lenses of the Lower Cape Cod aquifer system and to assess the effects of changing ground-water pumping, recharge conditions, and sea level on ground-water flow in Lower Cape Cod, Massachusetts. A numerical flow model was developed with the computer code SEAWAT to assist in the analysis of freshwater and saltwater flow. Model simulations were used to determine water budgets, flow directions, and the position and movement of the freshwater/saltwater interface. Model-calculated water budgets indicate that approximately 68 million gallons per day of freshwater recharge the Lower Cape Cod aquifer system with about 68 percent of this water moving through the aquifer and discharging directly to the coast, 31 percent flowing through the aquifer, discharging to streams, and then reaching the coast as surface-water discharge, and the remaining 1 percent discharging to public-supply wells. The distribution of streamflow varies greatly among flow lenses and streams; in addition, the subsurface geology greatly affects the position and movement of the underlying freshwater/saltwater interface. The depth to the freshwater/saltwater interface varies throughout the study area and is directly proportional to the height of the water table above sea level. Simulated increases in sea level appear to increase water levels and streamflows throughout the Lower Cape Cod aquifer system, and yet decrease the depth to the freshwater/saltwater interface. The resulting change in water levels and in the depth to the freshwater/saltwater interface from sea-level rise varies throughout the aquifer system and is controlled largely by non-tidal freshwater streams. Pumping from large-capacity municipal-supply wells increases the potential for effects on surface-water bodies, which are affected by pumping and wastewater-disposal locations and rates. Pumping wells that are upgradient of surface-water bodies potentially capture water that would otherwise discharge to these surface-water bodies, thereby reducing streamflow and pond levels. Kettle-hole ponds, such as Duck Pond in Wellfleet, that are near the top of a freshwater flow lens, appear to be more susceptible to changing pumping and recharge conditions than kettle-hole ponds closer to the coast or near discharge boundaries, such as the Herring River.

Scientific Investigations Report↗
USGS2012

Borehole geophysical, fluid, and hydraulic properties within and surrounding the freshwater/saline-water transition zone, San Antonio segment of the Edwards aquifer, south-central Texas, 2010-11

The freshwater zone of the San Antonio segment of the Edwards aquifer is used by residents of San Antonio and numerous other rapidly growing communities in south-central Texas as their primary water supply source. This freshwater zone is bounded to the south and southeast by a saline-water zone with an intermediate zone transitioning from freshwater to saline water, the transition zone. As demands on this water supply increase, there is concern that the transition zone could potentially move, resulting in more saline water in current supply wells. Since 1985, the U.S. Geological Survey (USGS), San Antonio Water System (SAWS), and other Federal and State agencies have conducted studies to better understand the transition zone. During 2010 and 2011, the USGS, in cooperation with SAWS, conducted a study to further assess the potential for movement of the transition zone in part of the San Antonio segment of the Edwards aquifer. Equivalent freshwater heads were computed to investigate the transition from saline to freshwater zones in the San Antonio segment and evaluate the potential for lateral flow at the freshwater/saline-water interface. Data were collected within and surrounding the transition zone from 13 wells in four transects (East Uvalde, Tri-County, Fish Hatchery, and Kyle). Hydraulic head and geophysical log data were used to calculate equivalent freshwater heads and then analyzed to identify possible horizontal gradients across the transition zone and thus flow. Unlike previous studies that used indirect methods to calculate fluid conductivity from fluid resistivity, in this study geophysical tools that directly measured fluid conductivity were used. Electromagnetic (EM) flowmeter logs were collected under both ambient and stressed (pumping) conditions and were processed to identify vertical flow zones within the borehole. The San Antonio segment of the Edwards aquifer (the study area) is about 175 miles long and extends from the western groundwater divide near Brackettville in Kinney County to the eastern groundwater divide near Kyle in Hays County. The four transects consist of two to five wells per transect and were configured approximately perpendicular to and across the expected trace of the freshwater/saline-water interface. The deep flow zone indicated by the EM flowmeter data for East Uvalde transect well EU2 corresponds directly with a large, negative deflection of the fluid logs, indicating an inflow of fresher water from the Devils River Limestone. To the southwest, towards the freshwater/saline-water interface, this same flow zone was observed in well EU1, but with a reduction of flow, and displayed no apparent fluid curve deflections. The highest observed transmissivity of the study area was observed in the saline zone of the Tri-County transect, at well TC3, which had a total transmissivity of 24,900 square feet per day. Zones of high transmissivity throughout the study site were observed to not be continuous and are likely caused by localized secondary porosity such as intersecting faults or karst features. Although analyses of daily mean equivalent freshwater heads for the East Uvalde transect indicated that the gradient across the freshwater/saline-water interface varied between into and out of the freshwater zone, the data indicate that there was a slightly longer period during which the gradient was out of the freshwater zone. Analyses of all daily mean equivalent freshwater heads for the Tri-County transect indicated that the lateral-head gradients across the freshwater/saline-water interface were typically mixed (not indicative of flow into or out of freshwater zone). Assessment of the daily mean equivalent freshwater heads indicated that, although the lateral-head gradient at the Kyle transect varied between into and out of the freshwater zone, the lateral-head gradient was typically from the transition zone into the freshwater zone.

Texas↗
USGS2015

Updated numerical model with uncertainty assessment of 1950-56 drought conditions on brackish-water movement within the Edwards aquifer, San Antonio, Texas

In 2010, the U.S. Geological Survey, in cooperation with the San Antonio Water System, began a study to assess the brackish-water movement within the Edwards aquifer (more specifically the potential for brackish-water encroachment into wells near the interface between the freshwater and brackish-water transition zones, referred to in this report as the transition-zone interface) and effects on spring discharge at Comal and San Marcos Springs under drought conditions using a numerical model. The quantitative targets of this study are to predict the effects of higher-than-average groundwater withdrawals from wells and drought-of-record rainfall conditions of 1950–56 on (1) dissolved-solids concentration changes at production wells near the transition-zone interface, (2) total spring discharge at Comal and San Marcos Springs, and (3) the groundwater head (head) at Bexar County index well J-17. The predictions of interest, and the parameters implemented into the model, were evaluated to quantify their uncertainty so the results of the predictions could be presented in terms of a 95-percent credible interval. The model area covers the San Antonio and Barton Springs segments of the Edwards aquifer; the history-matching effort was focused on the San Antonio segment. A previously developed diffuse-flow model of the Edwards aquifer, which forms the basis for the model in this assessment, is primarily based on a conceptualization in which flow in the aquifer is predominately through a network of numerous small fractures and openings. Primary updates to this model include an extension of the active area downdip, a conversion to an 8-layer SEAWAT variable-density flow and transport model to simulate dissolved-solids concentration effects on water density, history matching to 1999–2009 conditions, and parameter estimation in a highly parameterized context using automated methods in PEST (a model-independent Parameter ESTimation code). In addition to the best-fit parameter values derived from history matching, the uncertainty of model parameters was also estimated by using linear uncertainty analysis. Comparison of “prior” (before history matching) and “posterior” (after history matching) variances of parameters indicate that the information within the observation dataset used for history matching informs many parameters. The concentration threshold parameters were well-informed by the observation dataset as their posterior distributions were much narrower than their prior distributions. The transition-zone scaling parameters of hydraulic conductivity, effective porosity, and specific storage were all informed by the observation dataset, as evidenced by the difference between the prior and posterior variances. Saline-zone scaling parameters, alternatively, were not informed by the observation dataset for effective porosity and specific storage. Resulting posterior drier-month, wetter-month, and annual recharge multiplier parameter variances are important to understanding how well recharge is estimated and implemented within the model. The shifts of the posterior distributions left and right indicate that there were zones where less or more water was needed in the model. The widths of the distributions were not decreased substantially, indicating that many of the best-fit recharge parameters are not statistically different from the initial values specified in the history-matching effort. Recharge from rainfall is the driving force behind groundwater flow and heads in the aquifer; therefore, an increase in understanding of this process would benefit model development by potentially decreasing the uncertainty of this parameter. The history-matching effort was most helpful in informing the parameters in the model that control discharge at springs, namely, the spring orifice (drain) altitude and drain conductance parameters for each spring. The uncertainty assessment of the predictive model (a hypothetical recurrence of 1950–56 drought conditions and higher-than-average groundwater withdrawals from wells) provided insights into the potential effects of these conditions on dissolved-solids concentration changes at production wells near the transition-zone interface, discharges at Comal and San Marcos Springs, and heads at Bexar County index well J-17. Results at the 25 production wells near the transition-zone interface indicate that the uncertainty of model input parameters based on expert knowledge yielded an upper bound of the 95-percent credible interval of dissolved-solids concentrations that exceeds the secondary drinking water standards of 1,000 milligrams per liter (mg/L) of the Texas Commission on Environmental Quality (TCEQ) for many wells. However, the history-matching process provided key information to inform prediction-sensitive model parameters and therefore, contributed to a substantial decrease of the upper bound of the 95-percent credible interval to below the secondary drinking water standards. Reductions in dissolved-solids concentration changes were on the order of 400 mg/L to 1,300 mg/L. The reduction in uncertainty in regards to this prediction implies that this prediction of dissolved-solids concentration change can be made with some certainty using this current model and that those parameters that control this prediction are informed by the observation dataset. Even though predictive uncertainty was reduced for this prediction, dissolved-solids concentration changes were still greater than zero, indicating a minimal increase in concentration at these 25 production wells during the 7-year simulation period is likely. However, this minimal concentration increase indicates a small potential for movement of the brackish-water transition zone near these wells during the 7-year simulation period of drought-ofrecord (1950–56) rainfall conditions with higher-than-average groundwater withdrawals by wells. Predictive results of total spring discharge during the 7-year period, as well as head predictions at Bexar County index well J-17, were much different than the dissolved-solids concentration change results at the production wells. These upper bounds are an order of magnitude larger than the actual prediction which implies that (1) the predictions of total spring discharge at Comal and San Marcos Springs and head at Bexar County index well J-17 made with this model are not reliable, and (2) parameters that control these predictions are not informed well by the observation dataset during historymatching, even though the history-matching process yielded parameters to reproduce spring discharges and heads at these locations during the history-matching period. Furthermore, because spring discharges at these two springs and heads at Bexar County index well J-17 represent more of a cumulative effect of upstream conditions over a larger distance (and longer time), many more parameters (with their own uncertainties) are potentially controlling these predictions than the prediction of dissolved-solids concentration change at the prediction wells, and therefore contributing to a large posterior uncertainty.

Texas↗
USGS2019

Use of a Numerical Model to Simulate the Hydrologic System and Transport of Contaminants Near Joint Base Cape Cod, Western Cape Cod, Massachusetts

Historical training and operational activities at Joint Base Cape Cod (JBCC) on western Cape Cod, Massachusetts, have resulted in the release of contaminants into an underlying glacial aquifer that is the sole source of water to the surrounding communities. Remedial systems have been installed to contain and remove contamination from the aquifer. Groundwater withdrawals for public supply are expected to increase as the region continues to urbanize. Increases in water-supply withdrawals and wastewater return flow likely will affect the hydrologic system around JBCC and could affect the transport of any contamination that may remain in the aquifer following remediation of contamination from the JBCC. The U.S. Geological Survey, in cooperation with the Air Force Civil Engineer Center, developed a numerical, steady-state regional model of the Sagamore flow lens on western Cape Cod and evaluated the potential effects of future (2030) groundwater withdrawals on water levels, streamflows, hydraulic gradients, and advective transport near the JBCC. The aquifer consists generally of sandy sediments underlain by impermeable bedrock and is bounded laterally by a freshwater/saltwater interface. Data on the altitude of the bedrock surface, position of the freshwater/saltwater interface, lithology of the aquifer, spatial distribution of recharge, and hydrologic boundaries were incorporated into the three-dimensional, finite-difference groundwater flow model. Some inputs into the numerical model—aquifer properties, leakances, and recharge—are represented as parameters to facilitate estimation of optimal parameter values in an inverse calibration. A hybrid parameterization scheme, with both zones of piecewise constancy and pilot points, is used to represent hydraulic conductivity; other adjustable parameters include recharge, boundary leakance, and porosity. Data on water levels, the distribution of subsurface contamination, and groundwater ages were compiled, evaluated, and used to develop observations of long-term average hydraulic gradients and advective-transport patterns. These observations of steady-state hydrologic conditions were combined with the parameterized groundwater model in an inverse calibration to estimate model parameters that best fit the observations. Current (2010) and future (2030) conditions were simulated in the calibrated model to characterize the groundwater flow system and to determine potential effects of increased groundwater withdrawals on advective-transport patterns at the JBCC. Groundwater flow and advective transport are radially outward from a water-table divide in the northern part of the JBCC; flow diverges from the divide toward all points of the compass. Most groundwater flow and contaminant transport occur in shallow parts of the aquifer. On average, about one-half of the groundwater flux occurs in the shallowest 20 percent of the saturated thickness; shallow flow is even more predominant near streams and lakes. Projected (2030) increases in groundwater withdrawals decrease water levels by a maximum of about 1.2 feet in the northern part of the JBCC; drawdowns exceeding 1 foot generally are limited to areas near the largest increases in withdrawals, such as in the northern part of the JBCC, near Long Pond in Falmouth, and in eastern Barnstable. Streamflow decreases average about 6 percent; the largest decreases are in areas with the largest drawdowns. Changes in hydraulic-gradient directions at the water table exceed 1 degree in about 13 percent of the aquifer, generally near groundwater divides where gradient magnitudes are small and near large groundwater withdrawals. Predictions of advective transport from randomly selected locations at the water table are similar for current (2010) and future (2030) groundwater withdrawals. The results indicate that projected increases in groundwater withdrawals affect water levels and streamflows, but effects on hydraulic gradients and advective transport at the JBCC likely are small. Several underlying assumptions inherent in the model, including observations and weights used in the calibration, representation of local-scale heterogeneity, and simulation of the freshwater/saltwater interface, could affect model calibration and predictions; these assumptions were evaluated with alternative models and alternative inverse calibrations. Eight alternative calibrations were performed in which different, but reasonable, observations and weights were used. The preferred calibrated model had the best overall fit to the observations. Fine-grained silty sediments occur in many parts of the aquifer, and silt lenses can locally affect hydraulic gradients. A set of alternative models in which silts were represented with different correlation distances and hydraulic conductivities indicated that explicitly representing silt lenses could affect model calibration but that the implicit representation of local-scale heterogeneity may be sufficient at the regional scale to represent regional-scale hydraulic gradients. For the coastal boundary, two alternative models representing silty and sandy seabeds and their associated interface positions were developed to test the importance of the assumed coastal-boundary condition. The two alternative models resulted in different predictions of streamflow—streamflows increase with smaller (silty) seabed leakances. However, predictions of advective transport, particularly near the JBCC, generally were similar between the alternative and preferred calibrated models, indicating that the seabed leakance and associated interface position at the coastal boundary does not affect simulations of advective transport in inland parts of the aquifer.

Massachusetts↗
USGS2001

Simulation of ground-water discharge to Biscayne Bay, southeastern Florida

As part of the Place-Based Studies Program, the U.S. Geological Survey initiated a project in 1996, in cooperation with the U.S. Army Corps of Engineers, to quantify the rates and patterns of submarine ground-water discharge to Biscayne Bay. Project objectives were achieved through field investigations at three sites (Coconut Grove, Deering Estate, and Mowry Canal) along the coastline of Biscayne Bay and through the development and calibration of variable-density, ground-water flow models. Two-dimensional, vertical cross-sectional models were developed for steady-state conditions for the Coconut Grove and Deering Estate transects to quantify local-scale ground-water discharge patterns to Biscayne Bay. A larger regional-scale model was developed in three dimensions to simulate submarine ground-water discharge to the entire bay. The SEAWAT code, which is a combined version of MODFLOW and MT3D, was used to simulate the complex variable-density flow patterns. Field data suggest that ground-water discharge to Biscayne Bay relative to the shoreline is restricted to within 300 meters at Coconut Grove, 600 to 1,000 meters at Deering Estate, and 100 meters at Mowry Canal. The vertical cross-sectional models, which were calibrated to the field data using the assumption of steady state, tend to focus ground-water discharge to within 50 to 200 meters of the shoreline. With homogeneous distributions for aquifer parameters and a constant-concentration boundary for Biscayne Bay, the numerical models could not reproduce the lower ground-water salinities observed beneath the bay, which suggests that further research may be necessary to improve the accuracy of the numerical simulations. Results from the cross-sectional models, which were able to simulate the approximate position of the saltwater interface, suggest that longitudinal dispersivity ranges between 1 and 10 meters, and transverse dispersivity ranges from 0.1 to 1 meter for the Biscayne aquifer. The three-dimensional, regional-scale model was calibrated to ground-water heads, canal baseflow, and the general position of the saltwater interface for nearly a 10-year period from 1989 to 1998. The mean absolute error between observed and simulated head values is 0.15 meter. The mean absolute error between observed and simulated baseflow is 3 x 105 cubic meters per day. The position of the simulated saltwater interface generally matches the position observed in the field, except for areas north of the Miami Canal where the simulated saltwater interface is located about 5 kilometers inland of the observed saltwater interface. Results from the regional-scale model suggest that the average rate of fresh ground-water discharge to Biscayne Bay for the 10-year period (1989-98) is about 2 x 105 cubic meters per day for 100 kilometers of coastline. This simulated discharge rate is about 6 percent of the measured surface-water discharge to Biscayne Bay for the same period. The model also suggests that nearly 100 percent of the fresh ground-water discharge is to the northern half of Biscayne Bay, north of the Cutler Drain Canal. South of the Cutler Drain Canal, coastal lowlands prevent the water table from rising high enough to drive measurable quantities of ground water to Biscayne Bay. Annual variations in sea-level elevation, which can be as large as 0.3 meter, have a substantial effect on rates of ground-water discharge. During 1989-98, simulated rates of ground-water discharge to Biscayne Bay generally are highest when sea level is relatively low.

Florida↗
USGS2000

Flow and salinity characteristics of the upper Suwannee River Estuary, Florida

Continuous stage and salinity data were recorded from August 1995 to December 1997 at four gages located in the upper Suwannee River Estuary. Continuous velocity data were recorded at two of the four gages and continuous discharge data were computed for these two gages. Additional salinity data were collected at 15 monitoring sites from November 1992 to October 1997. Wind-speed data collected at Cedar Key, Florida, during the study period were utilized in the regression analysis. Correlations were developed to describe the longitudinal extent of the saltwater/freshwater interface (defined as 0.5 parts per thousand (ppt) salinity) and salinity distribution in the upper Suwannee River Estuary. On East Pass, the median of difference between daily maximum and daily minimum stage ranged from 2.92 feet for a gage at river mile 3.8 to 3.33 feet for a gage at river mile 1.2. Velocities tended to be unidirectional with some instances of bilateral flow. Reversal in flow direction was common and coincided with rising tides. Monthly mean discharges for the Suwannee River near Wilcox, Florida, during the study period typically were lower than the average for the period of record (1931.97). Discharge near Wilcox averaged 4,000 cubic feet per second (ft3/s) lower than the long-term average from June to September 1996. An El Ni�o event induced precipitation that was responsible for higher than average monthly mean discharge measured near Wilcox during November and December 1997. The maximum observed salinity concentrations for the study period ranged from 28.20 ppt at river mile 3.8 to 31.00 ppt at river mile 1.9. Median daily fluctuations of salinity at river miles 3.8 and 1.2 were 0.12 and 11.31 ppt, respectively. The maximum daily upstream extent of the saltwater/freshwater interface was at or upstream from river mile 4.0 for about 50 percent of the study period. The interface was at or upstream from river mile 3.8 and river mile 2.8 40 and 57 percent of the time. The interface was downstream from river mile 1.2 and river mile 1.9 11 and 21 percent of the time, respectively. The median daily maximum salinity for the four gages ranged from 0.22 ppt at river mile 3.8 to 11.50 ppt at river mile 1.2. Multiple linear-regression models were developed to determine the isohaline location for 0.5, 2, 5, 10, 15, and 20 ppt salinity, and to predict the maximum daily salinity concentrations at gages as a function of stage, river discharge, and wind. The salinity at a location was inversely proportional to the daily mean discharge at the Suwannee River near Wilcox. Under extreme low-flow conditions (3,500 ft3/s), the regression models predicted that the interface would occur at river mile 7.2, upstream from the Gopher River confluence with the Suwannee River. Wind speed did not have a substantial influence on model predictions. The period of record for the Suwannee River at Wilcox was applied to appropriate regression models to produce a synthetic record of historical salinity distributions. Two withdrawal scenarios, a 10-percent diversion and a 1,000 ft3/s diversion, were evaluated relative to high-, medium-, and low-flow conditions and compared to actual salinity distributions. The 10-percent and 1,000 ft3/s withdrawals scenarios resulted in the isohaline of 0.5 ppt migrating 0.6 and 1.58 miles upstream from the actual isohaline location for a low-flow condition of 4,500 ft3/s, and migrating 0.14 and 0.65 miles upstream from the actual isohaline location for a high-flow conditions of 20,300 ft3/s for Wadley Pass.

Florida↗
USGS1991

New hydrologic instrumentation in the U.S. Geological Survey

New water-level sensing and recording instrumentation is being used by the U.S. Geological Survey for monitoring water levels, stream velocities, and water-quality characteristics. Several of these instruments are briefly described. The Basic Data Recorder (BDR) is an electronic data logger, that interfaces to sensor systems through a serial-digital interface standard (SDI-12), which was proposed by the data-logger industry; the Incremental Shaft Encoder is an intelligent water-level sensor, which interfaces to the BDR through the SDI-12; the Pressure Sensor is an intelligent, nonsubmersible pressure sensor, which interfaces to the BDR through the SDI-12 and monitors water levels from 0 to 50 feet; the Ultrasonic Velocity Meter is an intelligent, water-velocity sensor, which interfaces to the BDR through the SDI-12 and measures the velocity across a stream up to 500 feet in width; the Collapsible Hand Sampler can be collapsed for insertion through holes in the ice and opened under the ice to collect a water sample; the Lighweight Ice Auger, weighing only 32 pounds, can auger 6- and 8-inch holes through approximately 3.5 feet of ice; and the Ice Chisel has a specially hardened steel blade and 6-foot long, hickory D-handle.

Conference Paper↗
USGS2002

Simulations of seismic hazard for the Pacific Northwest of the United States from earthquakes associated with the Cascadia subduction zone

We investigate the impact of different rupture and attenuation models for the Cascadia subduction zone by simulating seismic hazard models for the Pacific Northwest of the U.S. at 2% probability of exceedance in 50 years. We calculate the sensitivity of hazard (probabilistic ground motions) to the source parameters and the attenuation relations for both intraslab and interface earthquakes and present these in the framework of the standard USGS hazard model that includes crustal earthquakes. Our results indicate that allowing the deep intraslab earthquakes to occur anywhere along the subduction zone increases the peak ground acceleration hazard near Portland, Oregon by about 20%. Alternative attenuation relations for deep earthquakes can result in ground motions that differ by a factor of two. The hazard uncertainty for the plate interface and intraslab earthquakes is analyzed through a Monte-Carlo logic tree approach and indicates a seismic hazard exceeding 1 g (0.2 s spectral acceleration) consistent with the U.S. National Seismic Hazard Maps in western Washington, Oregon, and California and an overall coefficient of variation that ranges from 0.1 to 0.4. Sensitivity studies indicate that the paleoseismic chronology and the magnitude of great plate interface earthquakes contribute significantly to the hazard uncertainty estimates for this region. Paleoseismic data indicate that the mean earthquake recurrence interval for great earthquakes is about 500 years and that it has been 300 years since the last great earthquake. We calculate the probability of such a great earthquake along the Cascadia plate interface to be about 14% when considering a time-dependent model and about 10% when considering a time-independent Poisson model during the next 50-year interval.

Pure and Applied Geophysics↗