Search USGS⌕ Search

USGS · sir20185110

Deep aquifer recharge in the Columbia River Basalt Group, upper Umatilla River Basin, northeastern Oregon

Abstract

Groundwater is an important component of the water resources of the upper Umatilla River Basin of northeastern Oregon. As such, understanding the capacity of the resource is vital. Past studies have estimated recharge in the study area. One recent study of the upper Umatilla River Basin indicated that about 80 percent of recharge entering the groundwater system is discharged to streams in the study area through shallow groundwater-flow paths, leaving about 20 percent of recharge to infiltrate deeper parts of the aquifer system. The purpose of this work is to quantify the spatial distribution and variability of deep aquifer recharge in the study area and to understand the reasons for a relatively low percentage of total recharge reaching the deeper parts of the groundwater-flow system. The study area is divided into two distinct physiographic regions—the highly dissected Blue Mountains and the lowland plains. Underlying both regions of the study area are basalts of the Columbia River Basalt Group (CRBG), which is the principal aquifer in the study area. Deep incision by streams in the Blue Mountains disrupts the lateral continuity of the CRBG aquifer units, and infiltrating water is more readily diverted laterally and discharged to streams and springs. In the lowland plains, incision is less pronounced. The shallow CRBG units might be disrupted, but deeper aquifer units retain their lateral continuity and enable groundwater to infiltrate deeper and flow laterally farther downgradient before discharging. Recharge to the deep basalt aquifers is estimated as the difference between total recharge and base flow. Total recharge is the portion of precipitation and applied irrigation water that infiltrates past the root zone to become groundwater recharge. Of this total recharge, a proportion discharges to springs and streams in the study area, and the remaining water infiltrates below the base level of streams and recharges the deep basalt aquifers and contributes to the regional groundwater flow system. The portion of total recharge that recharges the regional flow system is referred to as deep aquifer recharge. Total recharge is the portion of precipitation and applied irrigation water that infiltrates past the root zone to become groundwater recharge. It is the sum of recharge from precipitation and recharge from infiltration of irrigation water. Recharge from precipitation was calculated using a regression method developed for the Columbia Plateau. Recharge from infiltrating irrigation water was obtained from a water balance model developed for the Columbia Plateau. Base flow, the component of streamflow that represents groundwater discharge as opposed to runoff from the land surface, was estimated using the Base Flow Index Modified (BFI-Modified) method, an empirical hydrograph separation technique. Base flow was estimated in eight subbasins with streamgages within the study area. Five of the eight subbasins in which base flow was estimated had permitted water rights for irrigation that specified surface water as the primary source of water. Maximum surface-water withdrawal for irrigation was estimated for all subbasins in which water rights for irrigation occur. The base-flow estimate from BFI-Modified is assumed to be the minimum amount of base flow. The sum of the BFIModified base-flow estimate and the maximum permitted surface-water withdrawal estimate for each subbasin is assumed to be the maximum amount of base flow at the streamgage. These minimum and maximum estimates of base flow were used to calculate minimum and maximum values of deep aquifer recharge in each subbasin analyzed within the study area. Subbasin estimates were scaled up to the Blue Mountains and lowland plains regions, and to the entire study area. Mean annual total recharge for 1981–2010 in the subbasins, analyzed as part of this work, ranged from 6 inches (in.) in the Patawa and Wildhorse Creek subbasins in the lowland plains to as much as 20 in. in the Umatilla River above Meacham Creek subbasin. Mean annual total recharge totaled 4 in. in the lowland plains region and 14 in. in the Blue Mountains. Mean annual total recharge for the entire study area was 11 in. Mean annual base flow ranged from 1 in. in the Patawa and Wildhorse Creek subbasins in the lowland plains to as much as 14 in. in the Umatilla River above Meacham Creek subbasin in the Blue Mountains. Mean annual deep aquifer recharge ranged from 4 in. in the Patawa and Wildhorse Creek subbasins in the lowland plains to as much as 8 in. in the Isqu’ulktpe Creek subbasin in the Blue Mountains. Deep aquifer recharge was 3–4 in. in the lowland plains region and 6 in. in the Blue Mountains. Over the entire study area, mean annual deep aquifer recharge was 5 in. Most groundwater recharge (both total and deep aquifer) in the study area occurred in the Blue Mountains, which highlights the importance of the Blue Mountains as the principal source of groundwater for the study area and for aquifers farther downgradient. Total recharge in the Blue Mountains region represents 86 percent of the mean annual total recharge in the study area in an area that encompasses 65 percent of the study area. However, only 43–44 percent of the mean annual total recharge remains in the system to recharge the deeper, regional aquifer system because the rest is discharged as base flow within the Blue Mountains region. Within the lowland plains region of the study area, an estimated 67–84 percent of the mean annual total recharge remains in the system to recharge the deep, regional aquifer system. Although total recharge in the study area represents only 14 percent of the total recharge across the study area, it contributes 20–24 percent of the water to the deep aquifer. The difference in the percentage of deep groundwater recharge in the Blue Mountains and the lowland plains is attributed to differences in the degree of stream incision. Stream channels are more incised in the Blue Mountains region than they are in the lowland plains. The dissection of the landscape in the Blue Mountains disrupts the lateral continuity of the CRBG aquifer units and allows groundwater to discharge to springs and streams rather than infiltrate more deeply. In the lowland plains region, incision is much less pronounced and deeper CRBG units likely retain their lateral continuity, enabling groundwater to infiltrate more deeply than in the Blue Mountains.

Explore related subjects

90° N90° S · 180° W ← longitude → 180° E
Source-reported bounding extent: 45.25° to 46° latitude; -119° to -118° longitude. This indicates report coverage, not an exact sampling location. View area on OpenStreetMap.

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Esther M. Pischel, Henry M. Johnson, Stephen B. Gingerich. 2018-11-14. Deep aquifer recharge in the Columbia River Basalt Group, upper Umatilla River Basin, northeastern Oregon. https://doi.org/10.3133/sir20185110

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

Baseline water-quality inventory and summary for the Paterson Great Falls National Historical Park, New Jersey

The Paterson Great Falls National Historical Park (PAGR), established in 2011 in the City of Paterson, New Jersey, contains many cultural, historical, and natural resources. Because of the PAGR’s young age and limited resources, a long record of natural resource data is not available for use to guide future park management and planning decisions. A detailed natural resource inventory was identified as an immediate need in the “Foundation Document—Paterson Great Falls National Historical Park,” given the history of extensive industrial activity throughout the PAGR and the Passaic River Basin. The U.S. Geological Survey, in cooperation with the National Park Service and the Urban Waters Federal Partnership for the Lower Passaic River, inventoried water-quality monitoring efforts and compiled historical water-quality data from secondary data sources to define baseline conditions in the PAGR and the surrounding study area. This report documents the methods used to harmonize water-quality data aggregated from multiple sources for the PAGR study area. Procedures implemented during data harmonization include compiling data from multiple sources, assessing the dataset for completeness, addressing metadata concerns, and creating a consistent and quality-assured dataset for future analysis. The harmonized dataset contains 14 aggregated surface-water sites, 1,103 individual sampling days, and 32,000 water-quality records throughout the period of record defined for this study (1952–2021). Summary statistics and comparison to water-quality criteria are provided for focus parameters that can support PAGR management, including field properties, suspended material, total dissolved solids, specific conductance, chloride, sulfate, Escherichia coli, nutrients, contaminants of concern related to fish consumption advisories, and litter and floatable debris. A spatial data gap was identified for the recreational area near the base of the Great Falls and immediately downstream from a known combined sewer overflow discharge location. Analytic data gaps were identified for continuous streamflow and water-quality parameters, floatable debris characterization, and harmful algal blooms identification. Continuous collection of contaminants of concern was identified as a temporal data gap, as these parameters were not consistently collected within the study area. The water-quality data synthesis and summary presented in this report can assist PAGR staff in understanding the complex baseline water resources within the study area and can serve as a baseline to design future water-quality monitoring efforts and evaluate changes in water quality over time. The harmonized dataset, as well as future New Jersey Department of Environmental Protection and New Jersey Harbor Discharge Group monitoring data and assessments, can also be used to examine the status and trends in surface-water quality, support compliance with the Clean Water Act (33 U.S.C. 1251 et seq.), and further investigate changes to park water resources that can affect ecological and human health.

New Jersey↗

Slip tendency and dilation tendency of Quaternary faults in the Great Basin region, Arizona, California, Idaho, Nevada, Oregon, Utah, and Wyoming

This report presents the results of slip tendency and dilation tendency analysis of Quaternary faults in the Great Basin region, in the states of Arizona, California, Idaho, Nevada, Oregon, Utah, and Wyoming. This effort was undertaken as part of two studies: the U.S. Department of Energy Geothermal Technologies Office-funded Innovative Geothermal Exploration through Novel Investigations of Undiscovered Systems (INGENIOUS) project, which is a multidisciplinary, multi-institution effort to develop new methodologies and best practices to accelerate the discovery of new, commercially viable hydrothermal resources; and the U.S. Geological Survey Geothermal Resources Investigations Project. The goal of this work is to identify faults and fault segments that are appropriately oriented to be stress-loaded for slip or to dilate under the ambient stress conditions. Both conditions may make such faults more likely to host permeability and fluid flow relative to other faults in the region. Slip tendency and dilation tendency were calculated for all fault segments in the study area from the U.S. Geological Survey Quaternary Fault and Fold Database. Results demonstrate that faults with high slip tendency and dilation tendency are common in the Great Basin region. The areas containing many high slip tendency and dilation tendency fault segments are associated with high strain rates. These areas also host a relatively high proportion of the known hydrothermal systems. This indicates that faults with high slip tendency and dilation tendency in areas with high strain-rate are potentially most prospective for hosting hydrothermal systems. The database published in coordination with this report contains the slip tendency and dilation tendency results data, including the fault geometry and stress data used to calculate these quantities, for both the Great Basin study area and the smaller INGENIOUS study area.

Arizona, California, Idaho, Nevada, Oregon, Utah, ↗

A spatial analysis of the groundwater emergence flood hazard in Long Island, New York, and coastal areas surrounding Long Island Sound in New York, Connecticut, and Rhode Island

Long Island, New York, and nearby coastal areas surrounding Long Island Sound are densely populated and, like other coastal areas, are susceptible to flooding from several potential sources, including stormwater from precipitation events, tidal flooding and storm surge, and groundwater emergence flooding. Groundwater emergence fooding refers to the intersection of a rising water table with land surface or critical infrastructure. Many studies of flood drivers either neglect or only briefly discuss how shallow groundwater conditions may contribute to or exacerbate flood conditions. As a part of a comprehensive study of compound flood hazards in the coastal areas of Long Island and Long Island Sound, a spatial analysis was completed by the U.S. Geological Survey, in cooperation with the Environmental Protection Agency’s Long Island Sound Partnership, formerly called the Long Island Sound Study, using available regional datasets to characterize the potential hazard for groundwater emergence flooding. The approximately 3,100 square mile study area was subdivided into 11,407 grid cells that were 900 meters by 900 meters (approximately 3,000 feet by 3,000 feet), for the purpose of integrating the spatial datasets to calculate and map the groundwater emergence flood hazard. The depth to the water table, hydrologic soil groups, and National Land Cover Database were harmonized to the common grid. A groundwater emergence flood hazard score was calculated for each grid cell for current average conditions following a set of rules accounting for the depth to the water table and the percentage of area within each cell with slow infiltrating soils. A scenario with a higher sea-level position was also calculated for the Long Island part of the study area. The calculated groundwater emergence flood hazard score was reviewed in conjunction with the National Land Cover Database to identify developed areas and associated infrastructure that may be at risk of potential groundwater emergence flooding. Study results indicate that the groundwater emergence flood hazard is highest in coastal areas and near surface water where the water table is close to ground surface. Inland areas away from surface waterbodies are not likely to be exposed to groundwater emergence flooding. For Long Island, in the scenario with higher sea-level position, a greater groundwater emergence flood hazard is calculated for some locations closer to the coast and where land is submerged. Away from the coast and surface-water drainage, the groundwater emergence flood hazard is similar between the current average sea-level condition and the higher sea-level position scenario.

Connecticut, New York, Rhode Island↗