Search USGS⌕ Search

USGS · ofr77302

Catalog of earthquakes in the Santa Barbara Channel area for the period January 1, 1972 to December 31, 1973

Abstract

The Santa Barbara Channel region forms the western most area of the Transverse Ranges, and is one of the most seismically active areas in the State of California. Instrumentally recorded earthquakes throughout southern California have been reported by the Seismological Laboratory of the California Institute of Technology (CALTECH) since 1932. Earthquake data for the period 1934 to 1963 were analyzed by Allen and others (1965) and related to regional geologic structures in southern California. Sylvester and others (1970) discussed the earthquake swarm that occurred in the Santa Barbara channel during the period from June 26 to August 3, 1968 with respect to the seismic history of the channel. The U. S. Geological Survey (USGS) (Vedder and others, 1969a) prepared a report on the geology, petroleum development, and seismicity of the Santa Barbara Channel region subsequent to an offshore oil-well blowout in the Dos Cuadras Offshore oil field. In that report, Hamilton and others (1969) reviewed the regional seismicity and its possible effects on the region. They noted that the existing seismic network precluded identification of individual active faults within the channel. A network of seismograph stations was established in late 1969 by the U. S. Geological Survey to monitor earthquakes in and around the Santa Barbara Channel. The purpose of this network is to provide data to gain insight into the tectonic and physical processes responsible for the generation of damaging earthquakes in the Santa Barbara Channel region. Lee and Vedder, (1973) reported the earthquakes located by this network for the period from January 1, 1970 to December 31, 1971, and showed that the earthquake activity appears to be spatially related to recognized faults in the region. This report contains a catalog of earthquakes in the Santa Barbara Channel region for the period from January 1, 1972 to December 31, 1973. It is prepared in a manner similar to that of the catalog contained in Lee and Vedder (1973) for the preceding two year period. These catalogs contain the basic study of seismicity in the Santa Barbara Channel region. The data contained in these catalogs provides a foundation for further study of the seismicity in tectonics of the Santa Barbara Channel region.

Explore related subjects

90° N90° S · 180° W ← longitude → 180° E
Source-reported bounding extent: 32.534156° to 42.009247° latitude; -124.409591° to -114.134768° longitude. This indicates report coverage, not an exact sampling location. View area on OpenStreetMap.

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Sharon L. Kirkman, William L. Ellsworth. 1977. Catalog of earthquakes in the Santa Barbara Channel area for the period January 1, 1972 to December 31, 1973. https://doi.org/10.3133/ofr77302

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

Floods of June 20–July 6, 2024, in the Big Sioux River, Rock River, Little Sioux River, Ocheyedan River, and Floyd River Basins, northwestern Iowa

Major flooding occurred on June 20–July 6, 2024, in northwestern Iowa affecting the Big Sioux, Rock, Little Sioux, Ocheyedan, and Floyd River Basins. Heavy rain fell in northwestern Iowa, southwestern Minnesota, and southeastern South Dakota on June 20–22, 2024. Parts of northwestern Iowa recorded 2–6 inches of rainfall and localized amounts exceeding 12 inches. A maximum peak-of-record streamflow of 175,000 cubic feet per second at the U.S. Geological Survey streamgage Big Sioux River at Akron, Iowa (06485500), was recorded on June 22, 2024, and had an annual exceedance probability range of 0.2–0.49 percent. High-water marks were measured at four locations along the Big Sioux River between U.S. Interstate 29 at Sioux City, Iowa, upstream to Iowa Highway 10 north of Hawarden, Iowa, a distance of 75.7 river miles. A maximum peak-of-record streamflow of 157,000 cubic feet per second at the U.S. Geological Survey streamgage Rock River near Rock Valley, Iowa (06483500), was recorded on June 22, 2024, and had an annual exceedance probability of less than 0.2 percent. High-water marks were measured at eight locations along the Rock River between County Road B30 east of Hudson, South Dakota, upstream to Iowa Highway 9 at Rock Rapids, Iowa, a distance of 39.3 river miles. A maximum peak-of-record streamflow of 63,000 cubic feet per second at the U.S. Geological Survey streamgage Little Sioux River at Correctionville, Iowa (06606600), was recorded on June 24, 2024, and had an annual exceedance probability range of 0.2–0.49 percent. High-water marks were measured at 11 locations along the Little Sioux River between Iowa Highway 31 west of Correctionville, Iowa, upstream to U.S. Highway 18 north of Spencer, Iowa, a distance of 134.8 river miles. A maximum streamflow of 24,500 cubic feet per second at the U.S. Geological Survey streamgage Ocheyedan River near Spencer, Iowa (06605000), was recorded on June 22, 2024, and had an annual exceedance probability range of 0.2–0.49 percent. High-water marks were measured at three locations along the Ocheyedan River between County Road M38 west of Spencer, Iowa, upstream to U.S. Highway 18 west of Everly, Iowa, a distance of 12.8 river miles. A maximum streamflow of 41,000 cubic feet per second at the U.S. Geological Survey streamgage Floyd River at Alton, Iowa (06600100), was recorded on June 22, 2024, and had an annual exceedance probability range of 1–1.99 percent. High-water marks were measured at six locations along the Floyd River between Iowa Highway 3 at Le Mars, Iowa, upstream to Iowa Highway 10 at Alton, Iowa, a distance of 27.5 river miles. The high-water marks were used to develop flood profiles for the Big Sioux, Rock, Little Sioux, Ocheyedan, and Floyd Rivers.

Iowa, Minnesota, South Dakota↗

Special Contributing Area Loading Program user’s manual

Information on the Special Contributing Area Loading Program execution and functions are presented in this user’s manual. An appendix presents a potential improvement for the user to consider. The hydrologic routing simulation method to model flow through multiple reservoirs, or sewer system components, is described. The use of Special Contributing Areas is described to run a successful simulation, which includes user input of hydrologic time series of flow components and the necessary formats. Upon completion of a successful Special Contributing Area Loading Program simulation, the program outputs hydrologic time series and a descriptive text file containing the model results for each defined sub-unit, or Special Contributing Area. The output time series contain flows through, and overflows from, the three reservoirs in the series, and the text file contains input and output path locations.

Open-File Report↗

Estimating aftershock risk for entry into earthquake-damaged buildings

We present a simple method to estimate the risk of experiencing strong shaking from aftershocks during entry into earthquake-damaged buildings. We compute wait times until the probability of strong ground shaking from aftershocks reaches a predefined risk threshold; for example, a 0.4 percent probability of experiencing Modified Mercalli Intensity 7 or greater shaking during the planned building entry. We also develop a relation between aftershock probability and the probability of strong shaking, so that users can reference the U.S. Geological Survey aftershock forecast during an ongoing aftershock sequence to determine if the risk threshold has been met. We apply our method to active continental regions (for example, the Western United States), stable continental regions (for example, the Central and Eastern United States), and subduction zones (for example, Cascadia or Alaska).

Open-File Report↗