Search USGSSearch

USGS · ofr20161066

Preliminary investigation of groundwater flow and trichloroethene transport in the Surficial Aquifer System, Naval Industrial Reserve Ordnance Plant, Fridley, Minnesota

Abstract

Industrial practices at the Naval Industrial Reserve Ordnance Plant, in Fridley, Minnesota, caused soil and groundwater contamination. Some volatile organic compounds from the plant might have discharged to the Mississippi River, forced by the natural hydraulic gradient in the surficial aquifer system. The U.S. Environmental Protection Agency included the Naval Industrial Reserve Ordnance Plant on the Superfund National Priorities List in 1989. This report describes a preliminary characterization of trichloroethene transport in the surficial and Cambrian-Ordovician aquifer systems at the Naval Industrial Reserve Ordnance Plant. The characterization first involved simulation of 2001 conditions using a model, followed by an application of this 2001 simulator to 2011 conditions. The U.S. Geological Survey, in cooperation with the U.S. Department of the Navy, used a steady-state, uniform-density groundwater flow model to simulate measured potentiometric heads in aquifer systems on August 20, 2001, and a single-phase, conservative, non-reactive, miscible transport model to simulate trichloroethene concentrations in aquifer systems measured in 2001. The U.S. Department of the Navy furnished trichloroethene source areas and trichloroethene source area concentrations to the U.S. Geological Survey for this model simulation. Furnished delineations were postulated and informed by data collected from 1995 to 2011. The groundwater flow simulation of August 20, 2001, was superior to the trichloroethene transport simulation at replicating measurements; simulated potentiometric heads matched 90 percent of measured potentiometric heads on August 20, within 2 feet at selected locations whereas simulated trichloroethene concentration contours of 3, 10, 100, 1000, and 10,000 micrograms per liter (µg/L) correctly bounded 52 percent of measured concentrations in 2001 at selected locations. The degree to which the simulated trichloroethene plume does not match trichloroethene measurements in the surficial aquifer system during the 2001 simulation may suggest that furnished trichloroethene source areas and trichloroethene source area concentrations did not accurately represent all trichloroethene sources in the hydrogeologic system. During the model simulation of 2001, trichloroethene discharged to the Mississippi River. A simulated 900-foot-long zone of benthic trichloroethene discharge flux existed in the shallow flow zone, across which simulated trichloroethene discharged from the surficial aquifer system to the Mississippi River at simulated trichloroethene concentrations that ranged from 3 µg/L to more than 100 µg/L. The Mississippi River was not sampled for volatile organic compounds in Fridley, Minn., from 1999 to 2016 (the publication of this report). Trichloroethene concentrations were measured in wells close to the Mississippi River in the surficial aquifer system on the downgradient side of the Naval Industrial Reserve Ordnance Plant groundwater flow field; for example, at well MS–43 in the shallow flow zone of the surficial aquifer system 280 feet east of the Mississippi River between December 1999 and August 2012, trichloroethene concentrations ranged from 130 to 220 µg/L. The 220-µg/L maximum concentration was reached in March 2003 and October 2006. The August 2012 concentration was 140 µg/L. The August 20, 2001, groundwater flow model simulator and the 2001 trichloroethene transport simulator were applied to a groundwater extraction and treatment system that existed in 2011. Furnished trichloroethene source areas and concentrations in the 2001 simulator were replaced with different, furnished, hypothetical source areas and concentrations. Forcing in 2001 was replaced with forcing in 2011. No trichloroethene concentrations greater than 3 µg/L were simulated as discharging to the Mississippi River during applications of the 2001 simulator to the 2011 groundwater extraction and treatment system. These applications were not intended to represent historical conditions. Differences between furnished and actual trichloroethene sources may explain differences between measurements and simulation results for the 2001 trichloroethene transport simulator. Causes of differences between furnished and actual trichloroethene sources may cause differences between hypothetical application results and the performance of the actual U.S. Department of the Navy groundwater extraction and treatment system at the Naval Industrial Reserve Ordnance Plant. Other limitations may also cause differences between application results and performance.

Explore related subjects

90° N90° S · 180° W ← longitude → 180° E
Source-reported bounding extent: 45.02986219868277° to 45.25652199219273° latitude; -93.38172912597656° to -92.96905517578125° longitude. This indicates report coverage, not an exact sampling location. View area on OpenStreetMap.

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Jeffrey N. King, J. Hal Davis. 2016-05-16. Preliminary investigation of groundwater flow and trichloroethene transport in the Surficial Aquifer System, Naval Industrial Reserve Ordnance Plant, Fridley, Minnesota. https://doi.org/10.3133/ofr20161066

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

Special Contributing Area Loading Program user’s manual

Information on the Special Contributing Area Loading Program execution and functions are presented in this user’s manual. An appendix presents a potential improvement for the user to consider. The hydrologic routing simulation method to model flow through multiple reservoirs, or sewer system components, is described. The use of Special Contributing Areas is described to run a successful simulation, which includes user input of hydrologic time series of flow components and the necessary formats. Upon completion of a successful Special Contributing Area Loading Program simulation, the program outputs hydrologic time series and a descriptive text file containing the model results for each defined sub-unit, or Special Contributing Area. The output time series contain flows through, and overflows from, the three reservoirs in the series, and the text file contains input and output path locations.

Open-File Report

Estimating aftershock risk for entry into earthquake-damaged buildings

We present a simple method to estimate the risk of experiencing strong shaking from aftershocks during entry into earthquake-damaged buildings. We compute wait times until the probability of strong ground shaking from aftershocks reaches a predefined risk threshold; for example, a 0.4 percent probability of experiencing Modified Mercalli Intensity 7 or greater shaking during the planned building entry. We also develop a relation between aftershock probability and the probability of strong shaking, so that users can reference the U.S. Geological Survey aftershock forecast during an ongoing aftershock sequence to determine if the risk threshold has been met. We apply our method to active continental regions (for example, the Western United States), stable continental regions (for example, the Central and Eastern United States), and subduction zones (for example, Cascadia or Alaska).

Open-File Report

End-user needs for remote sensing wetlands of the Prairie Pothole Region of North America

The Prairie Pothole Region (PPR) of North America comprises globally important grassland and wetland ecosystems critical for numerous populations of migratory birds. Due to the importance of this region for migratory birds, and particularly waterfowl, and the threats of habitat loss due to intensifying agriculture, there is a mature and diverse system of conservation organizations, agencies, and partnerships that spends hundreds of millions of dollars annually on habitat conservation to support migratory bird populations. Remote sensing can be a powerful tool for observing and evaluating global change at large scales as well as expanding inferences from field studies to the broader landscape with statistical models. However, development and utilization of these tools has lagged behind their demand for several reasons, including concerns over spatial and temporal resolution and accuracy of products; perception of a misalignment with decision-maker needs; technological barriers such as skill sets of conservation professionals, computing resources, data access, and usability. In this report, we summarize the needs of conservation professionals and scientists who use or want to use remote sensing data products to inform science about wetland change and conservation of wetlands in the PPR. We assembled this information through several methods leading up to, during, and following a January 2026 PPR Wetland Remote Sensing Workshop. The workshop included United States and Canadian scientists, conservation professionals, and policy experts. Our goal was to bring together end-users and remote sensing product developers jointly to explore reducing the lag between product development and utilization of products to inform science and conservation. Specifically, we aimed to identify gaps in wetland remote sensing that limit effective monitoring, management, and conservation in the PPR, and to develop a framework that outlines pathways to address these gaps by fostering collaboration, improving communication networks, encouraging discussion, and building on existing and ongoing efforts. This report summarizes our participants’ descriptions of end-user needs and the outcomes of the workshop.

Prairie Pothole region