Search USGS⌕ Search

USGS · ofr20121012

Preparation and characterization of "Libby Amphibole" toxicological testing material

Abstract

The U.S. Environmental Protection Agency (USEPA) began work in Libby, Mont. in 1999 when an Emergency Response Team was sent to investigate local concern and media reports regarding asbestos-contaminated vermiculite. Since that time, the site has been granted Superfund status and site remediation to a safe level of asbestos has been ongoing. The amphibole asbestos from the Vermiculite Mountain vermiculite deposit near Libby, Mont. (Libby amphibole) is unusual in the sense that it is currently not classified as one of the regulated six asbestos minerals—chrysotile (a serpentine mineral) and the amphibole minerals amosite (asbestiform cummingtonite-grunerite), crocidolite (asbestiform riebeckite), asbestiform anthophyllite, asbestiform tremolite, and asbestiform actinolite. The amphiboles from the Vermiculite Mountain vermiculite deposit, primarily winchite and richterite, are related to tremolite and in the past have been referred to as sodium-rich tremolite or soda tremolite (Larsen, 1942; Boettcher, 1966; Wylie and Verkouteren, 2000; Gunter and others, 2003; Meeker and others, 2003). The public health issues in Libby, Mont. have brought to light many of the inconsistencies in the literature regarding fiber characteristics, nomenclature, and toxicology. To better understand the toxicological characteristics of the Libby amphibole, investigators require a sufficient quantity of material representing the range of fibrous amphiboles present in the vicinity of Vermiculite Mountain to use in toxicology studies. The material collected in 2000 (Meeker and others, 2003) has been exhausted and a second collection and preparation effort, funded by the USEPA, was conducted in 2007. Both the 2000 (LA2000) and 2007 (LA2007) materials were generated to support research needs identified by the USEPA and the National Toxicology Program, and new in-vivo and in-vitro toxicology studies are underway. This Open-File Report describes the process of preparation and summarizes the chemistry and mineralogy of the LA2007 toxicological testing material.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Heather Lowers, Stephen A. Wilson, Todd M. Hoefen, William Benzel, Gregory P. Meeker. 2012. Preparation and characterization of "Libby Amphibole" toxicological testing material. https://doi.org/10.3133/ofr20121012

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

ECCOE Landsat quarterly calibration and validation report—Quarter 2, 2026

Executive Summary The U.S. Geological Survey Earth Resources Observation and Science Calibration and Validation (Cal/Val) Center of Excellence (ECCOE) focuses on improving the accuracy, precision, calibration, and product quality of remote-sensing data, leveraging years of multiscale optical system geometric and radiometric calibration and characterization experience. The ECCOE Landsat Cal/Val Team continually monitors the geometric and radiometric performance of active Landsat missions and makes calibration adjustments, as needed, to maintain data quality at the highest level. This report provides observed geometric and radiometric analysis results for Landsats 8 and 9 for quarter 2 (April–June), 2026. All data used to compile the Cal/Val analysis results presented in this report are freely available from the U.S. Geological Survey EarthExplorer website: https://earthexplorer.usgs.gov.

Open-File Report↗

ECCOE Landsat quarterly calibration and validation report—Quarter 1, 2026

Executive Summary The U.S. Geological Survey Earth Resources Observation and Science Calibration and Validation (Cal/Val) Center of Excellence (ECCOE) focuses on improving the accuracy, precision, calibration, and product quality of remote-sensing data, leveraging years of multiscale optical system geometric and radiometric calibration and characterization experience. The ECCOE Landsat Cal/Val Team continually monitors the geometric and radiometric performance of active Landsat missions and makes calibration adjustments, as needed, to maintain data quality at the highest level. This report provides observed geometric and radiometric analysis results for Landsats 8 and 9 for quarter 1 (January–March) of 2026. All data used to compile the Cal/Val analysis results presented in this report are freely available from the U.S. Geological Survey EarthExplorer website: https://earthexplorer.usgs.gov . One specific activity that the ECCOE Landsat Cal/Val Team closely monitored was a Landsat 8 Thermal Infrared Sensor encoder alerts anomaly. On March 18, 2026, the Thermal Infrared Sensor instrument’s mechanism control electronics board reset, driving several parameters to default power-on values. Subsequent telemetry and analysis determined that no persistent hardware misconfiguration was present and no radiometric or geometric degradation was observed.

Open-File Report↗

Floods of June 20–July 6, 2024, in the Big Sioux River, Rock River, Little Sioux River, Ocheyedan River, and Floyd River Basins, northwestern Iowa

Major flooding occurred on June 20–July 6, 2024, in northwestern Iowa affecting the Big Sioux, Rock, Little Sioux, Ocheyedan, and Floyd River Basins. Heavy rain fell in northwestern Iowa, southwestern Minnesota, and southeastern South Dakota on June 20–22, 2024. Parts of northwestern Iowa recorded 2–6 inches of rainfall and localized amounts exceeding 12 inches. A maximum peak-of-record streamflow of 175,000 cubic feet per second at the U.S. Geological Survey streamgage Big Sioux River at Akron, Iowa (06485500), was recorded on June 22, 2024, and had an annual exceedance probability range of 0.2–0.49 percent. High-water marks were measured at four locations along the Big Sioux River between U.S. Interstate 29 at Sioux City, Iowa, upstream to Iowa Highway 10 north of Hawarden, Iowa, a distance of 75.7 river miles. A maximum peak-of-record streamflow of 157,000 cubic feet per second at the U.S. Geological Survey streamgage Rock River near Rock Valley, Iowa (06483500), was recorded on June 22, 2024, and had an annual exceedance probability of less than 0.2 percent. High-water marks were measured at eight locations along the Rock River between County Road B30 east of Hudson, South Dakota, upstream to Iowa Highway 9 at Rock Rapids, Iowa, a distance of 39.3 river miles. A maximum peak-of-record streamflow of 63,000 cubic feet per second at the U.S. Geological Survey streamgage Little Sioux River at Correctionville, Iowa (06606600), was recorded on June 24, 2024, and had an annual exceedance probability range of 0.2–0.49 percent. High-water marks were measured at 11 locations along the Little Sioux River between Iowa Highway 31 west of Correctionville, Iowa, upstream to U.S. Highway 18 north of Spencer, Iowa, a distance of 134.8 river miles. A maximum streamflow of 24,500 cubic feet per second at the U.S. Geological Survey streamgage Ocheyedan River near Spencer, Iowa (06605000), was recorded on June 22, 2024, and had an annual exceedance probability range of 0.2–0.49 percent. High-water marks were measured at three locations along the Ocheyedan River between County Road M38 west of Spencer, Iowa, upstream to U.S. Highway 18 west of Everly, Iowa, a distance of 12.8 river miles. A maximum streamflow of 41,000 cubic feet per second at the U.S. Geological Survey streamgage Floyd River at Alton, Iowa (06600100), was recorded on June 22, 2024, and had an annual exceedance probability range of 1–1.99 percent. High-water marks were measured at six locations along the Floyd River between Iowa Highway 3 at Le Mars, Iowa, upstream to Iowa Highway 10 at Alton, Iowa, a distance of 27.5 river miles. The high-water marks were used to develop flood profiles for the Big Sioux, Rock, Little Sioux, Ocheyedan, and Floyd Rivers.

Iowa, Minnesota, South Dakota↗