Search USGSSearch

USGS · 70261698

Salinity or sum of constituents— Methods comparison for computing dissolved solids concentrations in streams of the Upper Colorado River Basin

Abstract

The Colorado River is an important water source in the southwestern United States and northern Mexico. High concentrations of dissolved solids in the river, sourced mainly from the Upper Colorado River Basin (UCOL), cause hundreds of millions of dollars in damages annually to crops and infrastructure. Determinations of total dissolved solids (TDS) in river and tributary samples often rely on summed concentrations of constituents in solution reported as the sum of constituents (SOC), which includes the bicarbonate concentration converted to the equivalent carbonate mass that would be present as a residue after drying. Alternatively, salinity, similar to SOC but including the entire concentration of bicarbonate in solution, may be used as a measure of dissolved solids. Use of SOC results may under-represent actual dissolved-solids concentrations and loads in streams where bicarbonate is a substantial component of the dissolved solids in solution. The objective of this manuscript is to evaluate the differences between the SOC and salinity determinations of dissolved solids in UCOL streams and rivers. Water-quality data from the U.S. Geological Survey were used to compute salinity concentrations at UCOL stream sites for comparison with SOC determinations. Results from 8,001 samples at 418 UCOL sites indicate a median increase in dissolved solids of 20% (13% and 30%, 25th and 75th percentiles, respectively) using the salinity method compared with SOC results. Differences in dissolved solids attributable to the computational approach for handling bicarbonate at UCOL sites were significantly greater than laboratory variability based on results from 890 replicate analyses. Salinity may be a more useful indicator of water quality than SOC in systems with substantial proportions of bicarbonate in the composition of dissolved solids, including the Colorado River and UCOL sites.

Explore related subjects

90° N90° S · 180° W ← longitude → 180° E
Source-reported bounding extent: 35.26377010349002° to 43.360892248620246° latitude; -112.07478126793694° to -104.67840732485422° longitude. This indicates report coverage, not an exact sampling location. View area on OpenStreetMap.

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Fred D. Tillman, Matthew P. Miller, Daniel R. Wise, R. Blaine McCleskey, Natalie K. Day. 2024-12-17. Salinity or sum of constituents— Methods comparison for computing dissolved solids concentrations in streams of the Upper Colorado River Basin. https://doi.org/10.1371/journal.pwat.0000310

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

Hydrogeology, groundwater salinity distributions, and assessment of the effect of oil-production activities on groundwater in the Midway Valley area, western Kern County, San Joaquin Valley, California

This study seeks to determine the effects of oil field produced water disposal operations and well mechanical integrity issues on groundwater quality in oil fields in the southwest San Joaquin Valley, California. Whereas previous studies used groundwater wells to study shallow aquifers outside the oil fields, this study demonstrates that future approaches may use oil well geophysical logs to map groundwater head gradients, create salinity profiles and document changes in salinity over time in oil field areas with sparse groundwater well data and at depths greater than 330 m. We also incorporate an analysis of well histories to determine potential effects of compromised wellbore seals on changes in aquifer quality that cannot be explained by water disposal practices. Water quality in the aquifers is naturally brackish across most of the area, with better quality groundwater occurring in the eastern part. Geophysical logs are used to determine salinity variations within aquifers including the depth at which TDS exceeds 10,000 mg/L. This depth ranges from 366 m in the northwest to approximately 1,500 m in the southeast. Oil well porosity logs are used to determine water table elevations. These logs indicate the water table slopes south-southeast, showing the predominant groundwater flow direction is from oil field disposal areas toward better quality groundwater east of the oil fields. Geophysical logs show formation resistivity near some disposal facilities has decreased over time, indicating the salinity of the aquifer has increased due to disposal of saline produced water in injection wells and ponds. Oil well history analysis suggests that increased salinity over time in water-saturated sand intervals >1.5 km from disposal facilities may be caused by mechanical failures and/or incomplete borehole seals in poorly constructed or abandoned wellbores prevalent throughout the study area—particularly wells drilled prior to 1930.

California

Groundwater quality near an oil field in a stream-dominated recharge setting, California, USA

Alluvial valley aquifers are important sources of water supply in many areas but effects of co-located oil and gas development on these resources have not been widely reported, especially in settings where recharge is dominated by stream infiltration. Interpreting the presence of geochemical indicators in the context of hydrology, geology, and other factors provides a more complete understanding of the relations between groundwater and sources of oil-field fluids and aids in identifying risks associated with oil and gas development. Groundwater and Salinas River water samples were collected in an alluvial valley near the San Ardo Oil Field in Monterey County, California and analyzed for a wide range of dissolved chemical, gas, and isotopic constituents to determine if oil-field fluids (water and gas from oil-producing and non-producing zones) have mixed with fresh groundwater used for supply. Hydraulic gradients, age-dating tracers, and other geochemical indicators show that recharge from the Salinas River has the potential to dilute oil-field fluids that might migrate or seep into the aquifer. Groundwater and Salinas River water collected downgradient of the San Ardo Oil Field showed little or no evidence of mixing with oil-field fluids. Some samples within the oil field contained trace amounts of hydrocarbons or elevated temperatures, indicating that any potential effects from oil-field activities are minor or have been diluted by recharge from the Salinas River. The two samples with the most geochemical evidence of potential mixing with oil-field fluids (SP-18 and GW-17) were collected west of or along the Los Lobos fault, where naturally occurring hydrocarbons are near the land surface. Those samples are also near active or inactive oil-field wells, and so anthropogenic activities and pathways cannot be ruled out as a cause of trace detections of hydrocarbons and elevated temperatures in the aquifer.

California

Harmonization of aggregated freshwater biotic data to support continental and global assessment

Biodiversity loss and conservation are increasingly coming into focus in global policy fora, requiring information and assessments at wider spatial and temporal scales than previously considered. However, the monitoring framework required to support such data collection and assessment is lacking in many countries and is not harmonized across countries, hampering these efforts. Aggregation of existing freshwater data offers a solution to the problem of assessing status and trends of ecosystems and biodiversity at large spatial scales in the absence of nationally coordinated monitoring efforts. Analysis of aggregated data from different sources, collected using different protocols and with varying levels of metadata and supporting data, can be challenging and requires decisions regarding data comparability. In this paper, we identify the challenges inherent in harmonizing aggregated freshwater data for analysis, including general concerns related to research goals, spatial and temporal scale, sample selection, sampling effort, and site integrity. We also discuss the challenges related to measured parameters, sampled habitats, sample collection and processing methods, and data integrity for phytoplankton, benthic algae, macrophytes, zooplankton, benthic macroinvertebrates, fish, and supporting variables such as water and sediment chemistry. We provide a workflow to evaluate each of these challenges and make decisions about how best to work with the data. Finally, we review a case study from a large-scale analysis of freshwater data from the circumpolar Arctic region that exemplifies the encountered challenges and the chosen solutions. Through the description of the case study, we provide practical solutions to support aggregation and analysis of existing freshwater data. As global conversations about biodiversity status and trends continue, the demand for large-scale analyses of data from different sources will only grow. In the absence of globally harmonized monitoring, we are faced with the need to ensure comparability of data, making expert judgements where needed to support sound conclusions.

PLOS Water