Search USGS⌕ Search

USGS · 70216772

Evaluation of seismic hazard models with fragile geologic features

Abstract

We provide an overview of a 2019 workshop on the use of fragile geologic features (FGFs) to evaluate seismic hazard models. FGFs have been scarcely utilized in the evaluation of seismic hazard models, despite nearly 30 yr having passed since the first recognition of their potential value. Recently, several studies have begun to focus on the implementation of FGFs in seismic hazard modeling. The workshop was held to capture a “snapshot” of the state‐of‐the‐art in FGF work and to define key research areas that would increase confidence in FGF‐based evaluation of seismic hazard models. It was held at the annual meeting of the Southern California Earthquake Center on 8 September 2019, and the conveners were Mark Stirling (University of Otago, New Zealand) and Michael Oskin (University of California, Davis). The workshop attracted 44 participants from a wide range of disciplines. The main topics of discussion were FGF fragility age estimation (age at which an FGF achieved its current fragile geometry), fragility estimation, FGF‐based evaluation of seismic hazard models, and ethical considerations relating to documentation and preservation of FGFs. There are now many scientists working on, or motivated to work on, FGFs, and more types of FGFs are being worked on than just the precariously balanced rock (PBR) variety. One of the ideas presented at the workshop is that fragility ages for FGFs should be treated stochastically rather than assuming that all share a common age. In a similar vein, new studies propose more comprehensive methods of fragility assessment beyond peak ground acceleration and peak ground velocity‐based approaches. Two recent studies that apply PBRs to evaluate probabilistic seismic hazard models use significantly different methods of evaluation. Key research needs identified from the workshop will guide future, focused efforts that will ultimately facilitate the uptake of FGFs in seismic hazard analysis.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Mark W. Stirling, Mike Oskin, J. Ramon Arrowsmith, Anna H. Rood, Christine A. Goulet, Lisa Grant Ludwig, Tamarah King, Albert Kottke, Julian C. Lozos, Chris L M Madugo, Devin McPhillips, Dylan Rood, Norman Sleep, Christine Wittich. 2020-10-28. Evaluation of seismic hazard models with fragile geologic features. https://doi.org/10.1785/0220200197

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

Time for an updated macroseismic scale

Macroseismology plays a crucial role in earthquake hazard and risk analyses, linking past earthquake occurrences and impacts with those of the present and future. The popularity of internet-based community contributions and the usefulness of intensities for communicating seismic hazards, early warning, and impacts to the public have all bolstered the use of macroseismology beyond its traditional utility in characterizing sources and shaking from historical and modern earthquakes (Wald et al., 2023). Nevertheless, many modern approaches for collecting building damage data and assigning macroseismic intensities suffer limitations. Many countries do not or no longer routinely collect such data, and even after significant and even catastrophic earthquakes, building damage data are often not collected or shared systematically, nor are field-based macroseismic intensities professionally assigned. Additionally, the United States (U.S.), Canada, and other nations still use variations of the Modified Mercalli Intensity (MMI) scale (Wood and Neumann, 1931) for assigning macroseismic intensities. At nearly 100 years old, the MMI scale predates most modern building types. As a result, the scale is silent about and blind to building damage that now matters to most domestic occupants. It says nothing about single- or multi-unit wood-frame buildings, the predominant type of residential structure in the US and Canada, whose damage is a particularly important indicator of shaking intensity, nor about the collapse or safety of modern building types. Importantly, the dependence on the U.S. Geological Survey’s “Did You Feel It?” (DYFI) for domestic intensity data collection limits their accuracy type at higher, damaging intensity levels, where attention to building type is requisite. The MMI and some of its widely used variants are often poorly documented; there is no official version, nor is it even clear which version of the scale was employed in many studies (Musson, 2002). The MMI scale is consistent with—but is more limited than—the 1998 European Macroseismic Scale (EMS-98, Grünthal, 1998). The new International Macroseismic Scale of 2025 (IMS-25; Grünthal et al., 2025) builds on EMS-98—a well-documented, modern scale already widely used in Europe and well beyond. IMS-25 further expands EMS-98 internationally by enhancing the EMS-98 vulnerability table and damage grade collections to include more worldwide building types and their evolving design codes. Because the IMS requires well-defined vulnerability classes and damage grades specific to various structural types, its worldwide adoption will help unify post-event data collection on building damage. Similarly, the IMS requires statistical analyses of damage levels for specific structural types, ensuring that building damage sampling is sufficient for other important engineering analyses, such as the derivation of fragility functions, calibration of loss models, and the assessment of losses and damages after significant events

Seismological Research Letters↗

Amploc: A complete Python workflow for amplitude-based locations

Amplitude‐based locations are well suited for characterizing long‐duration seismic sources that may migrate with time, such as debris flows, avalanches, rockfall, and volcanic tremor. Although amplitude‐based location methods have existed for decades, their adoption in real‐time monitoring systems remains limited. We present a complete Python‐based workflow that includes station corrections, amplitude‐based location algorithms, and interactive review tools that are appropriate for real‐time use. The algorithms themselves are not new; however, Amploc integrates several previously published methods into a unified operational framework. The workflow also introduces a browser‐based graphical interface that allows users to review real‐time location results using formats familiar to many observatories. By integrating calibration, location algorithms, and visualization tools, Amploc lowers the barrier to operational use of amplitude‐based locations and improves characterization of phenomena that inform hazard assessments such as long‐period earthquakes, volcanic tremor, and debris flows.

British Columbia, Oregon, Washington↗

Global seasonal microseism intensity and hemispheric asymmetry

Earth’s microseism wavefield dominates seismic background levels at periods between approximately 4 and 20 s, and reflects periodic and secular variations in ocean swell energy. Ocean wave energy couples to the seismic wavefield via distinct primary microseism and secondary microseism (PM and SM) source mechanisms, which are excited by basal swell tractions and seafloor pressure variations due to crossing seas, respectively. This study examines annual amplitude variations for the globally dominant PM (14–20 s) and SM (4–10 s) period bands. Annual harmonic variations are represented by four‐term Fourier series fits to vertical‐component seasonally smoothed acceleration time series from 73 stations in the Global Seismographic and GEOSCOPE networks with over 20 yr of recording and at least 75% data completeness. These annual periodic functions fit between 14%–95% (PM) and 22%–97% (SM) of signal variance. Station annual peak‐to‐peak variations range between 1.2–14.3 dB (PM) and 1.5–20.6 dB (SM). An asymmetry in microseism features exists between the Northern (NH) and Southern (SH) Hemispheres. High‐latitude NH stations show highly correlated PM and SM annual amplitude variations. This character dominates the wider extratropical NH but diminishes at tropical latitudes, and widespread relative PM–SM decorrelation is observed in the SH. These hemispheric characteristics reflect systematic differences in both extratropical storm activity and ocean wave state. Greater annual variation and seasonal predictability in the NH reflect the influence of the large continental landmasses that enhance both storm intensity seasonality and SM‐generating coastal wave reflection. Notable clusters of low PM–SM correlation stations are also observed in continental Antarctica due to seasonal sea ice influences, and in East Asia, reflecting unusual PM and SM source responses to South Asian monsoonal and tropical cyclone ocean wave influences.

Seismological Research Letters↗