Geology topics

Devin McPhillips

Publications and source records attributed to Devin McPhillips.

7 recordsLinked to original sources

USGS2026

3D semantic mapping of surface geological features

Semantic mapping in 3D is fundamental to a wide range of geoscientific studies and applications, including geomorphology, hazard assessment, and environmental monitoring. However, automatically segmenting geological features from large-scale photogrammetric datasets remains a significant challenge. We present a methodology to address this gap. Using overlapping images collected over environments of interest, Structure-from-Motion (SfM) produces georeferenced point clouds and estimates camera poses. Existing large vision models, such as Segment Anything Model, segment objects in the images, generating pixel-segmentation associations. To produce pixel-point associations, we project the points back onto the camera image planes. As objects are independently segmented across multiple images with different perspectives, we develop a segmentation mosaicking algorithm to build probabilistic point-segmentation associations that combines the pixel-segmentation associations and pixel-point associations. Our methodology is validated using both synthetic data generated by Kubric and real-world UAV-SfM data. The implementation is designed to be compatible with existing SfM software, including Agisoft and OpenDroneMap, for photogrammetry mapping in geoscience studies. As a case study, we apply our method to the semantic mapping of precariously balanced rocks (PBRs), which provide upper-bound constraints on historical ground motion shaking intensity. To support object-level identification of PBRs, we additionally integrated Grounding DINO, enabling text-prompted segmentation of features of interest within UAV imagery. This case study demonstrates the effectiveness of our method in generating a 3D semantic map of PBRs, enabling spatial distribution of PBR fragility for earthquake hazard analysis.

Computers & Geosciences↗

USGS2026

Characterizing precariously balanced rocks (PBRs) in the eastern United States for estimating maximum past earthquake ground motions

Fragile geologic features (FGFs) can be used to estimate an upper bound to the strength of earthquake ground shaking in the past thousands to tens of thousands of years. FGFs could be especially useful in the eastern United States, where few active faults are available for paleoseismic studies and where low seismic attenuation means that an earthquake could damage FGFs at large distances. This article describes a pilot study of one form of FGF, precariously balanced rocks (PBRs), in the Blue Ridge of Virginia, ∼160 km from the central Virginia seismic zone (CVSZ) and ∼100 km from Virginia’s Giles County seismic zone (GCSZ). The main goal is to develop and refine methods for studying PBRs in the eastern United States. Photogrammetric 3D models of the rocks were used to locate their centers of mass and delineate their basal contacts, with the latter corroborated by wrapping a wire around the bases to verify the circumferences. Relations between hill geometry and amplification were used to estimate topographic amplification. Seismometers on the PBRs provided the frequencies, amplitudes, and directions of rocking after giving the rocks gentle pushes. The levels of ground shaking likely to topple the rocks were compared with the median hazard curves from the U.S. Geological Survey’s National Seismic Hazard Model and were used to map magnitudes of earthquakes in the nearby region likely to topple the rocks. Results indicate that an M w ≥ 7.5 earthquake is needed in the CVSZ or near the 2020 Sparta, North Carolina, earthquake to topple the two most fragile PBRs and that an earthquake of ~ M w 7–7.5 in the GCSZ is needed. The fragilities and estimated ages of the PBRs (20–40 ka) are thus consistent with the absence of such events in the historical record in the nearby region.

eastern United States↗

USGS2026

From collision to subduction: Thermal-kinematic inversions constrain plate boundary structure and dip-slip activity in southwestern New Zealand

Constraints on three-dimensional fault system geometry and kinematics are required to understand both long-term tectonics and contemporary seismic hazard. In many cases, these parameters must be inferred from a combination of different data or analyses. Here, we invert low-temperature thermochronological data to quantitatively parameterize both the crustal-scale geometry and late Cenozoic dip-slip activity of the plate boundary system in southwest New Zealand. We find that the modern transpressive plate boundary system has accommodated the bulk of Australian-Pacific Plate convergence since establishment in the middle Miocene-early Pliocene. Shortening has occurred via (a) dextral-reverse slip on the moderate angle, listric central Alpine Fault décollement, and (b) reverse-slip on either the sharply curved, anti-listric northern Puysegur subduction interface or low-angle offshore thrust fault system that splays from the high-angle southern Alpine Fault at depth. We resolve late Cenozoic shortening rates on these structures that are indistinguishable, and interpret these to reflect the transfer of convergent deformation outboard of the predominantly strike-slip southern Alpine Fault. Our work helps elucidate the transition from strain localized oblique continental collision to strain partitioned subduction. We also provide an estimate of the across-strike width of the central-southern Alpine Fault section boundary at seismogenic depths. This is the first quantitative constraint on the geometry of a structural feature inferred to have arrested several major prehistoric earthquakes. This study furthers understanding of fault structure and dip-slip kinematics along the greatest sources of seismic hazard in and offshore of southwest New Zealand.

South Island↗

USGS2025

Seismic response of rock towers at the Trona Pinnacles (U.S.A.) to the 2019 Ridgecrest earthquake sequence: Theory, observations, and models

We analyze the seismic response of a class of fragile geologic features (FGFs), referred to as rock towers (RTs) at the Trona Pinnacles, a group of RTs in southern California that suffered strong shaking during the 2019 Ridgecrest earthquake sequence. FGFs, including RTs, may provide maximum constraints on past earthquake shaking intensity, and thereby support probabilistic seismic hazard assessments (PSHAs). In a rare case study, we explore the hypothesis that RT structural integrity is time dependent, as damage accumulates progressively. We develop finite‐element method (FEM) models of the RTs using photogrammetric shape models. We validate the models by comparing numerical simulations of their response to broadband ground shaking with low‐intensity seismic recordings obtained at the Pinnacles. Results of our simulations are in good agreement with the seismic recordings of actual earthquake aftershocks. We next use the results of the FEM models to analyze the response and evolution of RTs. Our analyses elucidate the influence of geometry over their seismic response, providing a rationale that may explain the rarity of slender RTs at Trona: high‐aspect‐ratio structures that respond in bending develop detrimental tensile stresses that crack the rock, whereas low‐aspect‐ratio ones’ response also includes shearing, which does not compromise material integrity as much as tension. Field measurements with a rebound hammer support this finding, suggesting that the material around the base of slender rocks has been weakened relative to other parts of the RT. We also study how to define simplified mechanical models (“archetypes”) to predict the natural frequencies of RTs. Results from our work illuminate the fundamental mechanisms of seismic response and progressive failure of RTs, and open new avenues of research to potentially incorporate these geologic features as long‐return period constraints on PSHA, in ways analogous to those of the widely used precariously balanced rocks.

California↗

USGS2025

A scientific vision and roadmap for earthquake rupture forecast developments, a USGS perspective

We articulate a scientific vision and roadmap for the development of improved Earthquake Rupture Forecast models, which are one of the two main modeling components used in modern seismic hazard and risk analysis. One primary future objective is to provide fully time-dependent models that include both elastic rebound and spatiotemporal clustering nationwide, which is particularly important for shorter-term hazard and risk considerations (e.g., earthquake insurance products). We also discuss the importance and perennial challenges associated with quantifying epistemic uncertainties, including those associated with deformation-model slip rates, un-quantified sampling errors with respect to off-fault seismicity, and any spatial covariances. The need for more physics-based approaches is also emphasized, as is the benefit of adding model valuation (quantifying usefulness) to our verification and validation protocols. Given the multidisciplinary and system-level nature of this activity, modular design is critical. Future updates will also draw from best-available science by both the United States Geological Survey and the external community. The primary goal of this paper is to highlight plans that guide research and facilitate community engagement with model development, especially with respect to lowering the entry barrier for early career scientists and engineers. The paper is written so readers can focus on the sections that interest them most (see table of contents), with the Introduction and Discussion providing a stand-alone overview and summary.

Bulletin of the Seismological Society of America↗

USGS2025

Strong shaking from past Cascadia Subduction Zone earthquakes encoded in coastal landforms

Strong earthquakes along subduction zones are often devastating events, but sparse records along some tectonic margins limit our understanding of seismic hazards. Constraining shaking intensities is critical, especially in subduction zones with infrequent but large-magnitude earthquakes like the Cascadia Subduction Zone (CSZ), where the lack of recorded ground motions has led to uncertainty in the severity and potential impacts of future earthquakes. Here we fill this observational gap with a novel inventory of quantitative estimates of past shaking intensities from geotechnical modeling of coastal landforms. One hundred fifty-four deep-seated landslides and 65 fragile geologic features constrain minimum and maximum peak ground accelerations, respectively. These estimates are broadly consistent with model predictions of M9 ruptures, suggesting strong shaking of 0.4–0.8 g during past CSZ earthquakes. Local discrepancies between our geologic shaking constraints and earthquake simulations may inform past rupture behavior, leading to better predictions of shaking intensity for future earthquakes.

California, Oregon, Washington↗

USGS2024

Precariously balanced rocks in northern New York and Vermont, U.S.A.: Ground-motion constraints and implications for fault sources

Precariously balanced rocks (PBRs) and other fragile geologic features have the potential to constrain the maximum intensity of earthquake ground shaking over millennia. Such constraints may be particularly useful in the eastern United States (U.S.), where few earthquake‐source faults are reliably identified, and moderate earthquakes can be felt at great distances due to low seismic attenuation. We describe five PBRs in northern New York and Vermont—a region of elevated seismic hazard associated with historical seismicity. These boulders appear to be among the most fragile PBRs in the region, based on reports from hobbyists. The PBRs are glacial erratics, best evidenced by glacial striations on bedrock pedestals. The pedestals themselves are locally high knobs, often situated on regionally high topography; this setting limits soil development and indicates that any outwash deposits were likely ephemeral. As a result, PBR ages can be reliably established by the retreat of the last continental ice sheet, ∼15–13 ka. To quantify the fragility of the PBRs, we surveyed them with ground‐based light detection and ranging and calculated geometric parameters from the point clouds, field observations, and seismic responses. Preliminary validation of the 2023 time‐independent U.S. National Seismic Hazard Model (NSHM) shows that the existence of PBRs is generally consistent with the median site‐specific hazard curves. Only the Blue Ridge Road site suggests a modest reduction in hazard. To visualize the ensemble of data, we mapped the minimum permissible distance to potential source faults around each PBR site as a function of source magnitude by using the ground‐motion models from the 2023 NSHM. Viewed in this manner, our data are consistent with potential M ∼6.5 earthquake‐source faults in many parts of the Lake Champlain Valley and northern Adirondack Mountains. Our work illustrates a potential pathway for better constraining earthquake‐source faults in regions of cryptic faults.

Bulletin of the Seismological Society of America↗