Search USGS⌕ Search
Home/Archive/USGS

USGS · 70176567

Effect of roughness formulation on the performance of a coupled wave, hydrodynamic, and sediment transport model

Neil K. Ganju·Christopher R. Sherwood
View original source ↗Export metadata ↓

Abstract

A variety of algorithms are available for parameterizing the hydrodynamic bottom roughness associated with grain size, saltation, bedforms, and wave–current interaction in coastal ocean models. These parameterizations give rise to spatially and temporally variable bottom-drag coefficients that ostensibly provide better representations of physical processes than uniform and constant coefficients. However, few studies have been performed to determine whether improved representation of these variable bottom roughness components translates into measurable improvements in model skill. We test the hypothesis that improved representation of variable bottom roughness improves performance with respect to near-bed circulation, bottom stresses, or turbulence dissipation. The inner shelf south of Martha’s Vineyard, Massachusetts, is the site of sorted grain-size features which exhibit sharp alongshore variations in grain size and ripple geometry over gentle bathymetric relief; this area provides a suitable testing ground for roughness parameterizations. We first establish the skill of a nested regional model for currents, waves, stresses, and turbulent quantities using a uniform and constant roughness; we then gauge model skill with various parameterization of roughness, which account for the influence of the wave-boundary layer, grain size, saltation, and rippled bedforms. We find that commonly used representations of ripple-induced roughness, when combined with a wave–current interaction routine, do not significantly improve skill for circulation, and significantly decrease skill with respect to stresses and turbulence dissipation. Ripple orientation with respect to dominant currents and ripple shape may be responsible for complicating a straightforward estimate of the roughness contribution from ripples. In addition, sediment-induced stratification may be responsible for lower stresses than predicted by the wave–current interaction model.

Explore related subjects

Ocean ModellingArticle

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Neil K. Ganju, Christopher R. Sherwood. 2010. Effect of roughness formulation on the performance of a coupled wave, hydrodynamic, and sediment transport model. https://doi.org/10.1016/j.ocemod.2010.03.003

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

USGS2022

Smoothed Particle Hydrodynamics simulations of reef surf zone processes driven by plunging irregular waves

As waves interact with the slopes of coral reefs and other steep bathymetry profiles, plunging breaking usually occurs where the free surface overturns and violent water motion is triggered. Resolving these surf zone processes pose significant challenges for conventional mesh-based hydrodynamic models, due to the rapidly-deforming nature of the free surface and associated flows. Yet the accurate prediction of these surf zone hydrodynamics is critical for predicting a wide range of nearshore processes driven by wave breaking (e.g., wave dissipation and energy transfers; mean water levels and currents; and wave runup). In this study we assess the ability of the mesh-free, Lagrangian particle-based numerical modelling approach Smoothed Particle Hydrodynamics (SPH) based on DualSPHysics, to simulate the fine-scale hydrodynamic processes driven by irregular wave transformation over a fringing reef profile, by comparing results against detailed experimental observations from a physical modelling study. To greatly improve the computational efficiency, the SPH model was coupled to the mesh-based multi-layer nonhydrostatic wave-flow model SWASH. With this coupled approach, SWASH was used to efficiently simulate the evolution of non-breaking waves from the wavemaker up to the fore reef slope, with the SPH model then used to simulate the detailed hydrodynamic processes over the reef from just offshore of the breakpoint to the shoreline . The SPH model was able to accurately reproduce the complex free surface deformations during plunging breaking, the spectral evolution of waves across the reef flat (including nonlinear wave shape), the mean water levels and currents, and wave runup at the shoreline. Using the long duration simulations (>400 wave periods), the model was able to reproduce the full range of wave motions over the reef (from sea-swell to infragravity frequencies), including the increasing dominance of low frequency waves towards the shoreline and the large cross-reef standing wave motions excited by the reef geometry.

Ocean Modelling↗
USGS2021

An efficient method to calculate depth-integrated, phase-averaged momentum balances in non-hydrostatic models

Analysis of the mean (wave-averaged) momentum balance is a common approach used to explain the physical forcing driving wave set-up and mean currents in the nearshore zone. Traditionally this approach has been applied to phase-averaged models but has more recently been applied to phase-resolving models using post-processing, whereby model output is used to calculate each of the momentum terms. While phase-resolving models have the advantage of capturing the nonlinear properties of waves propagating in the nearshore (making them advantageous to enhance understanding of nearshore processes), the post-processing calculation of the momentum terms does not guarantee that the momentum balance closes. We show that this is largely due to the difficulty (or impossibility) of being consistent with the numerical approach. If the residual is of a similar magnitude as any of the relevant momentum terms (which is common with post-processing methods as we show), the analysis is largely compromised. Here we present a new method to internally calculate and extract the depth-integrated, mean momentum terms in the phase-resolving non-hydrostatic wave-flow model SWASH in a manner that is consistent with the numerical implementation. Further, we demonstrate the utility of the new method with two existing physical model studies. By being consistent with the numerical framework, the internal method calculates the momentum terms with a much lower residual at computer precision, combined with greatly reduced calculation time and output storage requirements compared to post-processing techniques. The method developed here allows the accurate evaluation of the depth-integrated, mean momentum terms of wave-driven flows while taking advantage of the more complete representation of the wave dynamics offered by phase-resolving models. Furthermore, it provides an opportunity for advances in the understanding of nearshore processes particularly at more complex sites where wave nonlinearity and energy transfers are important.

Ocean Modelling↗
USGS2015

Projected wave conditions in the Eastern North Pacific under the influence of two CMIP5 climate scenarios

Hindcast and 21st century winds, simulated by General Circulation Models (GCMs), were used to drive global- and regional-scale spectral wind-wave generation models in the Pacific Ocean Basin to assess future wave conditions along the margins of the North American west coast and Hawaiian Islands. Three-hourly winds simulated by four separate GCMs were used to generate an ensemble of wave conditions for a recent historical time-period (1976–2005) and projections for the mid and latter parts of the 21st century under two radiative forcing scenarios (RCP 4.5 and RCP 8.5), as defined by the fifth phase of the Coupled Model Inter-comparison Project (CMIP5) experiments. Comparisons of results from historical simulations with wave buoy and ERA-Interim wave reanalysis data indicate acceptable model performance of wave heights, periods, and directions, giving credence to generating projections. Mean and extreme wave heights are projected to decrease along much of the North American west coast. Extreme wave heights are projected to decrease south of ∼50°N and increase to the north, whereas extreme wave periods are projected to mostly increase. Incident wave directions associated with extreme wave heights are projected to rotate clockwise at the eastern end of the Aleutian Islands and counterclockwise offshore of Southern California. Local spatial patterns of the changing wave climate are similar under the RCP 4.5 and RCP 8.5 scenarios, but stronger magnitudes of change are projected under RCP 8.5. Findings of this study are similar to previous work using CMIP3 GCMs that indicates decreasing mean and extreme wave conditions in the Eastern North Pacific, but differ from other studies with respect to magnitude and local patterns of change. This study contributes toward a larger ensemble of global and regional climate projections needed to better assess uncertainty of potential future wave climate change, and provides model boundary conditions for assessing the impacts of climate change on coastal systems.

Ocean Modelling↗