Geology topics
Research about Idaho
Source-linked reports with geographic coverage including Idaho.
Fish assemblages and environmental variables associated with hard-rock mining in the Coeur d'Alene River basin, Idaho
As part of the U.S. Geological Survey's National Water Quality Assessment Program, fish assemblages, environmental variables, and associated mine densities were evaluated at 18 test and reference sites during the summer of 2000 in the Coeur d'Alene and St. Regis river basins in Idaho and Montana. Multimetric and multivariate analyses were used to examine patterns in fish assemblages and the associated environmental variables representing a gradient of mining intensity. The concentrations of cadmium (Cd), lead (Pb), and zinc (Zn) in water and streambed sediment found at test sites in watersheds where production mine densities were at least 0.2 mines/km 2 (in a 500-m stream buffer) were significantly higher than the concentrations found at reference sites. Many of these metal concentrations exceeded Ambient Water Quality Criteria (AWQC) and the Canadian Probable Effect Level guidelines for streambed sediment. Regression analysis identified significant relationships between the production mine densities and the sum of Cd, Pb, and Zn concentrations in water and streambed sediment (r 2 = 0.69 and 0.66, respectively; P < 0.01). Zinc was identified as the primary metal contaminant in both water and streambed sediment. Eighteen fish species in the families Salmonidae, Cottidae, Cyprinidae, Catostomidae, Centrarchidae, and Ictaluridae were collected. Principal components analysis of 11 fish metrics identified two distinct groups of sites corresponding to the reference and test sites, predominantly on the basis of the inverse relationship between percent cottids and percent salmonids (r = -0.64; P < 0.05). Streams located downstream from the areas of intensive hard-rock mining in the Coeur d'Alene River basin contained fewer native fish and lower abundances as a result of metal enrichment, not physical habitat degradation. Typically, salmonids were the predominant species at test sites where Zn concentrations exceeded the acute AWQC. Cottids were absent at these sites, which suggests that they are more severely affected by elevated metals than are salmonids.
Demography of a population collapse: The Northern Idaho ground squirrel (Spermophilus brunneus brunneus)
We studied the demography of a population of Northern Idaho ground squirrels ( Spermophilus brunneus brunneus ) in Adams Co., Idaho. The population was completely censused yearly from 1987 to 1999, during which time it declined from 272 to 10 animals. The finite population growth rate, based on a Leslie matrix model of average life-history parameters, was only 0.72 (i.e., significantly <1.0). Growth rate was more sensitive to proportional changes in juvenile female survival than to any other single life-history parameter. Comparisons with self-sustaining populations of closely related ground squirrel species revealed that juvenile survival and breeding rates of yearling females were anomalously low. We believe that the ultimate cause of the population's collapse was inadequacy of food resources, particularly seeds, due to drying of the habitat and changes in plant species composition, likely the result of fire suppression and grazing. No 'rescue' by immigration occurred, probably because S. b. brunneus seldom disperse long distances and fire suppression has allowed conifers to encroach on inhabited meadows, shrinking them and closing dispersal routes. The proximate cause of the population's collapse was mortality of older breeding females, which reduced the mean age of breeders. Younger females had lower average pregnancy rates and litter sizes. To place our results in context we developed a new, general classification of anthropogenic population declines, based on whether they are caused by changes in the means of the life-history parameters (blatant disturbances), their variances (inappropriate variations), or the correlations among them (evolutionary traps). Many S. b. brunneus populations have disappeared in recent years, apparently due to blatant disturbances, especially loss of habitat and changes in food-plant composition, resulting in inadequate prehibernation nutrition and starvation overwinter. In addition, our study population may have been caught in an evolutionary trap, because the vegetational cues that could potentially enable the animals to adjust reproduction to the anticipated food supply no longer correlate with availability of fat-laden seeds.
Kilometer-scale rapid transport of naphthalene sulfonate tracer in the unsaturated zone at the Idaho National Engineering and Environmental Laboratory
To investigate possible long-range flow paths through the interbedded basalts and sediments of a 200-m-thick unsaturated zone, we applied a chemical tracer to seasonally filled infiltration ponds on the Snake River Plain in Idaho. This site is near the Subsurface Disposal Area for radioactive and other hazardous waste at the Idaho National Engineering and Environmental Laboratory. Within 4 mo, we detected tracer in one of 13 sampled aquifer wells, and in eight of 11 sampled perched-water wells as far as 1.3 km away. These detections show that (i) low-permeability layers in the unsaturated zone divert some flow horizontally, but do not prevent rapid transport to the aquifer; (ii) horizontal convective transport rates within the unsaturated zone may exceed 14 m d −1 , perhaps through essentially saturated basalt fractures, tension cracks, lava tubes, or rubble zones; and (iii) some perched water beneath the Subsurface Disposal Area derives from episodic surface water more than 1 km away. Such rapid and far-reaching flow may be common throughout the Snake River Plain, and possibly occurs in other locations that have a geologically complex unsaturated zone and comparable sources of infiltrating water.
Epigenetic lead, zinc, silver, antimony, tin, and gold veins in Boulder Basin, Blaine and Custer Counties, Idaho: Potential for economic tin mineralization
Boulder Basin is in a northwest-trending belt of allochthonous Paleozoic rocks in the Boulder Mountains of central Idaho. Regional Tertiary extension resulted in widespread normal faulting and coeval emplacement of shallow-level intrusions and extrusive rocks of the Challis Volcanic Group. Epigenetic lead-zinc-silver-antimony-tin-gold vein deposits formed during Tertiary extension and are hosted within Paleozoic strata. The major orebodies are in the lower plate of the Boulder Basin thrust fault, in massive quartzite of the Middle Pennsylvanian to Lower Permian Wood River Formation. Anomalous concentrations of tin are present in the base-metal mineral assemblage of the Boulder Basin ore deposits. The tin-bearing veins in Boulder Basin are strikingly similar to Bolivian tin deposits. The deposit model for Bolivian tin deposits identifies buried tin porphyry below the tin-bearing vein system.
Mineralogical characterization of strata of the Meade Peak phosphatic shale member of the Permian Phosphoria Formation: Channel and individual rock samples of measured section J and their relationship to measured sections A and B, central part of Rasmussen Ridge, Caribou County, Idaho
The Permian Phosphoria Formation of southeastern Idaho hosts one of the largest phosphate deposits in the world. Despite the economic significance of this Formation, the fine-grained nature of the phosphorite has discouraged detailed mineralogical characterization and quantification studies. Recently, selenium and other potentially toxic trace elements in mine wastes have drawn increased attention to this formation, and motivated additional study. This study uses powder X-ray diffraction (XRD), with Rietveld quantification software, to quantify and characterize the mineralogy of composite channel samples and individual samples collected from the stratigraphic sections measured by the U.S. Geological Survey in the Meade Peak Member of the Permian Phosphoria Formation at the Enoch Valley mine on Rasmussen Ridge, approximately 15 miles northeast of Soda Springs, Idaho.
Statistical tables and charts showing geochemical variation in the Mesoproterozoic Big Creek, Apple Creek, and Gunsight formations, Lemhi group, Salmon River Mountains and Lemhi Range, central Idaho
The principal purpose of this report is to provide a reference archive for results of a statistical analysis of geochemical data for metasedimentary rocks of Mesoproterozoic age of the Salmon River Mountains and Lemhi Range, central Idaho. Descriptions of geochemical data sets, statistical methods, rationale for interpretations, and references to the literature are provided. Three methods of analysis are used: R-mode factor analysis of major oxide and trace element data for identifying petrochemical processes, analysis of variance for effects of rock type and stratigraphic position on chemical composition, and major-oxide ratio plots for comparison with the chemical composition of common clastic sedimentary rocks.
Composition of the Rex Chert and associated rocks of the Permian Phosphoria Formation: Soda Springs area, SE Idaho
This study, one in a series, reports bulk chemical and mineralogical compositions, as well as petrographic and outcrop descriptions of rocks collected from three measured outcrop sections of the Rex Chert member of the Phosphoria Formation in SE Idaho. The three measured sections were chosen from ten outcrops of Rex Chert that were described in the field. The Rex Chert overlies the Meade Peak Phosphatic Shale Member of the Phosphoria Formation, the source of phosphate ore in the region. Rex Chert removed as overburden comprises part of the material disposed in waste-rock piles during phosphate mining. It has been proposed that the chert be used to cap and isolate waste piles, thereby inhibiting the leaching of potentially toxic elements into the environment. It is also used to surface roads in the mining district. The rock samples studied here constitute a set of individual chert beds that are representative of each stratigraphic section sampled. The informally named cherty shale member that overlies the Rex Chert in measured section 1 was also described and sampled. The upper Meade Peak and the transition zone to the Rex Chert were described and sampled in section 7. The cherts are predominantly spicularite composed of granular and mosaic quartz, and sponge spicules, with various but minor amounts of other fossils and detrital grains. The cherty shale member and transition rocks between the Meade Peak and Rex Chert are siliceous siltstones and argillaceous cherts with ghosts of sponge spicules and somewhat more detrital grains than the chert. The overwhelmingly dominant mineral is quartz, although carbonate beds are rare in each section and are composed predominantly of calcite and dolomite in addition to quartz. Feldspar, mica, clay minerals, calcite, dolomite, and carbonate fluorapatite are minor to trace minerals in the chert. The mean concentrations of oxides and elements in the Rex Chert and the cherty shale member are dominated by SiO2, which averages 94.6%. Organic-carbon contents are generally very low in the chert, but are up to 1.8 wt. % in cherty shale member samples and up to 3.3% in samples from the transition between the Meade Peak and Rex Chert. Likewise, phosphate (P2O5) is generally low in the chert, but can be up to 3.1% in individual beds. Selenium concentrations in Rex Chert and cherty shale member samples vary from <0.2 to 138 ppm, with a mean concentration of 7.0 ppm. This mean Se content is heavily dependent on two values of 101 and 138 ppm for rocks from the transition zone between the Meade Peak and Rex Chert. Without those two samples, the mean Se concentration would be <1.0 ppm. Other elements of environmental interest, As, Cr, V, Zn, Hg, and Cd, are generally near or below their content in average continental shale. Stratigraphic changes (equivalent to temporal changes in the depositional basin) in chemical composition of rocks are notable either as uniform changes through the sections or as distinct differences in the mean composition of rocks that compose the upper and lower halves of the sections. Q-mode factors are interpreted to represent the following rock and mineral components: chert-silica component consisting of Si (± Ba); phosphorite-phosphate component composed of P, Ca, As, Y, V, Cr, Sr, and La (± Fe, Zn, Cu, Ni, Li, Se, Nd, Hg); shale component composed of Al, Na, Zr, K, Ba, Li, and organic C (± Ti, Mg, Se, Ni, Fe, Sr, V, Mn, Zn); carbonate component (dolomite, calcite, silicified carbonates) composed of carbonate C, Mg, Ca, and Si (± Mn); tentatively organic matter-hosted elements (and/or sulfide-sulfate phases) composed of Cu (± organic C, Zn, Mn Si, Ni, Hg, and Li). Selenium shows a dominant association with the shale component, but correlations and Qmode factors also indicate that organic matter (within the shale component) and carbonate fluorapatite may host a portion of the Se. Consideration of larger numbers of factors in Qmode analysis indicates that native Se (a factor containing Se (± Ba)) may also comprise a minor component of the Se compliment.
Mineralogical characterization of weathered and less weathered strata of the Meade Peak phosphatic shale member of the Permian Phosphoria Formation: Measured sections E and F, Rasmussen Ridge, and measured sections G and H, Sage Creek area of the Webster Range, Caribou County, Idaho
The Permian Phosphoria Formation of the western U.S. includes one of the largest phosphate deposits in the world. Despite the economic significance of this formation, its fine-grained nature has discouraged detailed mineralogical characterization and quantitative studies. Recently, selenium and other potentially hazardous trace elements in mine wastes have drawn increased attention to these rocks and motivated more extensive study. Part of this effort has focused on a more detailed geological and mineralogical characterization of the rocks. This study uses powder X-ray diffraction (XRD) with Rietveld quantification software to characterize the mineralogy of channel samples from stratigraphic sections measured by the U.S. Geological Survey in the Meade Peak Phosphatic Shale Member of the Permian Phosphoria Formation. Measured sections are at the Rasmussen Ridge mine and at the Smoky Canyon mine approximately 15 and 25 miles, respectively, northeast of Soda Springs, Idaho. The dominant minerals present in these samples are carbonate-fluorapatite, which is the most common phosphatic ore mineral in this and other marine phosphorites, quartz, muscovite, albite, orthoclase, the ammonium feldspar buddingtonite (NH4AlSi3O8), dolomite, and calcite. Because of their potential for hosting trace elements such as Se, the presence of minor pyrite and sphalerite is also noteworthy. Analysis of the carbonate content in the carbonate-fluorapatite by Rietveld refinement shows relatively low carbonate contents, generally between 2 ? 3% (wt.) CO3 2- in the apatite structure, compared to other marine phosphorites.
Structural geology of western part of Lemhi Range, east-central Idaho
The Poison Creek Anticline is a major fold that occupies a large part of the western part of the Lemhi Range. The fold is now broken by normal faults, but removal of displacement on the normal faults permitted reconstruction of the anticline. The fold formed during late Mesozoic compressional deformation in the hinterland of the Cordilleran thrust belt. It is in the hanging wall of the Poison Creek thrust fault, a major fault in east-central Idaho, that displaced Proterozoic strata over lower Paleozoic rocks.
Three-dimensional measurements of flow in uncased wells completed in basalt, Mountain Home Air Force Base, Idaho, March 2000
Several ground-water monitoring wells on the Mountain Home Air Force Base in southwestern Idaho were constructed in February 2000 to replace existing monitoring wells that became ineffective as a result of declining water levels. Upon completion of the replacement wells, borehole geophysical logs were collected, including natural gamma radiation, electromagnetic induction, caliper, fluid temperature, and resistivity. A prototype borehole acoustic doppler velocimeter (B-ADV) was used to make experimental three-dimensional measurements of lateral and vertical flow in two of the replacement wells, MW11–2 and MW3–2, each 450 feet deep, to better understand ground-water flow in the basalt underlying this area. Measurements indicated two independent flow zones in each well: unit B, from about 380 to about 415 feet below land surface, and unit C, from about 415 to about 430 feet below land surface. In each well, direction of flow in unit B was north-northwest toward Canyon Creek and, in unit C, south-southwest toward the Snake River. Measurements also indicated downward intraborehole flow in both wells. Unit B appeared to represent a local-scale flow regime; unit C appeared to represent a regional flow regime. This information suggests the existence of a complex three-dimensional hydrogeologic setting that cannot be discriminated easily on conventional waterlevel maps. Although data from only two wells are insufficient to construct a conceptual model of the ground-water flow regime, these experimental results demonstrate the capability of the B-ADV to obtain detailed flow measurements that, combined with data from other types of geophysical logs, discrete measurements of hydraulic head, and water chemistry, would aid in future studies and management of the ground-water resources, including contaminant transport and remediation.
Dissolved cadmium, zinc, and lead loads from ground-water seepage into the South Fork Coeur d'Alene River system, northern Idaho, 1999
The valley of the South Fork Coeur d’Alene River and some of its tributaries have been heavily impacted by the dispersion of metal-enriched materials from the Coeur d’Alene mining district since 1884. The valley floor, including the unconsolidated valley-fill/flood-plain aquifers, is a major holding area for mine tailings. The U.S. Geological Survey, in cooperation with the U.S. Environmental Protection Agency, characterized groundwater and surface-water relations for parts of the South Fork Coeur d’Alene River Basin and quantified the loading of dissolved metals into the South Fork Coeur d’Alene River system from groundwater seepage. This information can be used to determine the effects of dissolved metal from ground-water seepage on the river system and to evaluate the necessity and feasibility of remediation along gaining reaches. This study defines a field approach that can be repeated during and after the implementation of remediation solutions to measure the effectiveness of these efforts in reducing loading to streams. The study area includes three reaches along the South Fork Coeur d’Alene River valley in the Coeur d’Alene mining district in central Shoshone County, northern Idaho: a 3.3-mile reach of Canyon Creek at Woodland Park, a 4.8-mile reach of the South Fork Coeur d’Alene River near Osburn, and a 6.5-mile reach of the South Fork Coeur d’Alene River near Kellogg and Smelterville. Seepage studies were conducted during July 27–29; September 17–19; and October 15–17, 1999. Each seepage study was conducted over a 3-day period, during which each station was measured on a daily basis for streamflow, and waterquality samples were collected. The consecutiveday approach allowed for an evaluation of variability in streamflow gains and losses and metal loading that resulted from changing hydrologic conditions. During the July, September, and October seepage studies, ground-water seepage was the predominant source for gains in dissolved cadmium and zinc loads in the three study reaches, whereas tributary inflow loads were a minor source. The overall average net gain in dissolved zinc load from ground-water seepage into the South Fork Coeur d’Alene River near Kellogg and Smelterville was about 730 pounds per day, compared with the net gains in Canyon Creek at Woodland Park and the South Fork Coeur d’Alene River near Osburn, which were roughly similar at 150 and 218 pounds per day, respectively. The net gain in dissolved cadmium load from ground-water seepage into the three river reaches was about two orders of magnitude less than the gain in dissolved zinc. On the South Fork Coeur d’Alene River study reaches near Osburn and near Kellogg and Smelterville, no pattern associated with an increase or decrease in dissolved lead load along gaining or losing subreaches was recognizable. Canyon Creek at Woodland Park was the only study reach where ground-water seepage contributed appreciably to the dissolved lead load; the average net gain was 1.5 pounds per day. The average dissolved lead loads leaving South Fork Coeur d’Alene River study reaches (corrected for tributary inflow along the study reaches) near Osburn and near Kellogg and Smelterville were 1.4 and 0.8 pounds per day less, respectively, than the loads entering the study reaches. The decrease in dissolved lead could be the result of lead adsorbing onto organic and inorganic sediment surfaces and (or) coprecipitating with iron and manganese oxides. These forms of lead likely will be resuspended into the water column at high flows.
Analysis of nitrate (NO3-N) concentration trends in 25 ground-water-quality management areas, Idaho, 1961-2001
In Idaho, drinking-water supplies are pumped from relatively shallow ground-water zones where water quality has great potential for degradation by land- and water-use activities. One indicator of water quality, and one of the most widespread contaminants in Idaho ground water related to land and water uses, is dissolved nitrate. In December 2000, the U.S. Geological Survey, in cooperation with the Idaho Department of Environmental Quality, began a study to compile and assess nitrate data for ground water in 25 ground-water-quality management areas in Idaho. The primary objective of the study was to determine whether statistically significant trends in ground-water concentrations were discernible. Data included ground-water analyses but not analyses of water from springs, drains, or thermal water sources. A total of 8,465 nitrate analyses were compiled from 2,931 wells in the 25 priority areas; analyses dates ranged from June 1961 to February 2001. A time-period comparison was used to assess general trends in nitrate concentrations within individual priority areas. A time-series comparison was used to assess trends in nitrate concentrations from selected wells in each priority area. In time-period assessments, general trends in an area were evaluated by compiling nitrate data for selected time intervals to determine whether the population distributions were significantly different between one period and another. Data within each priority area were sorted into decades— 1970s, 1980s, and 1990s—for long-term trend assessment. The 1990s data also were divided into sets of selected years corresponding to Statewide Ambient Ground-Water Quality Program sampling cycles—1991 through 1994, 1995 through 1998, and a partial cycle, 1999 through 2000—for shortterm trend assessment. Data were analyzed by summary statistics, boxplots, and the Mann- Whitney statistical test. Long-term increasing trends in nitrate concentrations were evident for 6 of 25 priority areas, and long-term decreasing trends were evident for 4 of 25 areas. Short-term increasing trends were evident for 7 of 25 areas, and a short-term decreasing trend was evident for only 1 area. No long-term nitrate trends were evident for 7 of 25 areas, and no shortterm trends were evident for 15 of 25 areas. Data were insufficient for long-term trend assessment in 8 areas and for short-term assessment in 2 areas. Time-series trend analyses were conducted on data from wells with 7 or more nitrate analyses and longest periods of record, at least 10 years between oldest and most recent analyses. Because long-term records were available for so few wells and well construction data were not available for several of these wells, time-series analyses were not helpful to the nitrate trend assessment study. Trend results may be strongly affected by well construction, hydrogeologic environments, and changes in density and areal distribution of wells and analyses. The utility of nitrate trend assessments in priority areas would be improved by more consistent and specific well location descriptions between agencies; well construction and major water-yielding zone information to accompany the water-quality data for each well; and addition of historical nitrate data to data bases, particularly analyses prior to about 1990. Investigations of the possible effects of changing priority area boundaries and time periods on both long-term and short-term trend assessments are needed. Addition of these kinds of information would allow assessment of trends associated with hydrology and geology of each area and would provide a much stronger basis for trend assessment than currently possible.
A statistical model for estimating stream temperatures in the Salmon and Clearwater River basins, central Idaho
A water-quality standard for temperature is critical for the protection of threatened and endangered salmonids, which need cold, clean water to sustain life. The Idaho Department of Environmental Quality has established temperature standards to protect salmonids, yet little is known about the normal range of temperatures of most Idaho streams. A single temperature standard for all streams does not take into account the natural temperature variation of streams or the existence of naturally warm waters. To address these issues and to help the Idaho Department of Environmental Quality revise the existing State temperature standards for aquatic life, temperature data from more than 200 streams and rivers in the salmon and Clearwater River Basins were collected. From these data, a statistical model was developed for estimating stream temperatures on the basis of subbasin and site characteristics and climatic factors. Stream temperatures were monitored hourly for approximately 58 days during July, August, and September 2000 at relatively undisturbed sites in subbasins in the Salmon and Clearwater River Basins in central Idaho. The monitored subbasins vary widely in size, elevation, drainage area, vegetation cover, and other characteristics. The resulting data were analyzed for statistical correlations with subbasin and site characteristics to establish the most important factors affecting stream temperature. Maximum daily average stream temperatures were strongly correlated with elevation and total upstream drainage area; weaker correlations were noted with stream depth and width and aver-age subbasin slope. Stream temperatures also were correlated with certain types of vegetation cover, but these variables were not significant in the final model. The model takes into account seasonal temperature fluctuations, site elevation, total drainage area, average subbasin slope, and the deviation of daily average air temperature from a 30-year normal daily average air temperature. The goodness-of-fit of the model varies with day of the year. Overall, temperatures can be estimated with 95-percent confidence to within approximately plus or minus 4 degrees Celsius. The model performed well when tested on independent stream-temperature data previously collected by the U.S. Geological Survey and other agencies. Although the model provides insight into the natural temperature potential of a wide variety of streams and rivers in the Salmon and Clearwater River Basins, it has limitations. It is based on data collected in only one summer, during which temperatures were higher and streamflows were lower than normal. The effects of changes in streamflow on the effectiveness of the model are not known. Because the model is based on data from minimally disturbed or undisturbed streams, it should not be applied to streams known to be significantly affected by human activities such as disturbance of the streambed, diversion and return of water by irrigation ditches, and removal of riparian vegetation. Finally, because the model is based on data from streams in the Salmon and Clearwater River Basins and reflects climatological and landscape characteristics of those basins, it should not be applied to streams outside this region.
Lead poisoning of waterfowl by contaminated sediment in the Coeur D'Alene River
The Coeur d'Alene River basin in Idaho has been contaminated by mine tailings that have impaired the health of wildlife since the early 1900s. In other parts of the world, virtually all lead poisoning of waterfowl is caused by the ingestion of manmade lead artifacts, primarily spent lead shotshell pellets or, occasionally, fishing sinkers. However, in the Coeur d'Alene River basin in Idaho, nonartifactual lead poisoning was the ultimate cause of death of most of 219 (77%) of 285 waterfowl carcasses that had been found sick or dead from 1992 through 1997. The majority of these 219 waterfowl (172 tundra swans [Cygnus columbianus], 33 Canada geese [Branta canadensis], and 14 other species) were poisoned by ingesting river sediment that was contaminated with lead. The next most common cause of death (20 instances, 7%) was lead poisoning accompanied by ingested shotshell pellets. The remaining 46 waterfowl succumbed to trauma, infectious diseases (aspergillosis, avian cholera, tuberculosis), or miscellaneous problems, or the cause of death was not determined.