Search USGS⌕ Search

Geology topics

Research about California, Nevada

Source-linked reports with geographic coverage including California, Nevada.

At least 127 records · Page 7Linked to original sources
USGS2010

Multiple phases of basin formation along the Stateline fault system in the Pahrump and Mesquite Valleys, Nevada and California

Two phases of deformation are needed to describe the Cenozoic tectonic evolution of the Pahrump and Mesquite basins in the southern Great Basin and eastern Mojave Desert, United States. By interpreting seismic reflection and gravity observations along with bedrock and surficial mapping, we infer an extensional phase of basin formation followed by a transtensional phase, in this area straddling the border of southern Nevada and southeastern California. We reprocessed ∼220 line km of industry seismic reflection data from the Pahrump and Mesquite Valleys to emphasize reflections in the basin fill, and combined these results with analysis of gravity data. The seismic lines portray the complex geometry of the Stateline fault system, a major Neogene dextral strike-slip system that passes through these valleys, and provide evidence for multiple ages of faulting along structures that bound the Pahrump basin. Locally thick sequences of preextensional Tertiary sedimentary rocks are cut by large-offset, relatively high-angle normal faults that record a phase of extensional basin formation that preceded transtension. The existence of preextensional basins beneath the Pahrump and Mesquite Valleys bears on tectonic reconstruction of the region and suggests that tilted ranges blocks to the west of these valleys need not restore to positions immediately adjacent to the Spring Mountains to the east. Subsequent dextral offset on the Stateline fault system resulted in the formation of steep-sided basins, local arching and tectonic inversion, and the burial of earlier-formed normal faults with coarse clastic detritus. Gravity models that are constrained to match the basin architecture observed in the seismic lines require lateral variations in basin-fill and bedrock density, and they confirm that the Paleozoic outcrop of Black Butte, a topographic high separating the Pahrump and Mesquite Valleys, is unrooted to underlying bedrock.

California, Nevada↗
USGS2010

Death Valley regional groundwater flow system, Nevada and California: Hydrogeologic framework and transient groundwater flow model

A numerical three-dimensional (3D) transient groundwater flow model of the Death Valley region was developed by the U.S. Geological Survey for the U.S. Department of Energy programs at the Nevada Test Site and at Yucca Mountain, Nevada. Decades of study of aspects of the groundwater flow system and previous less extensive groundwater flow models were incorporated and reevaluated together with new data to provide greater detail for the complex, digital model. A 3D digital hydrogeologic framework model (HFM) was developed from digital elevation models, geologic maps, borehole information, geologic and hydrogeologic cross sections, and other 3D models to represent the geometry of the hydrogeologic units (HGUs). Structural features, such as faults and fractures, that affect groundwater flow also were added. The HFM represents Precambrian and Paleozoic crystalline and sedimentary rocks, Mesozoic sedimentary rocks, Mesozoic to Cenozoic intrusive rocks, Cenozoic volcanic tuffs and lavas, and late Cenozoic sedimentary deposits of the Death Valley regional groundwater flow system (DVRFS) region in 27 HGUs. Information from a series of investigations was compiled to conceptualize and quantify hydrologic components of the groundwater flow system within the DVRFS model domain and to provide hydraulic-property and head-observation data used in the calibration of the transient-flow model. These studies reevaluated natural groundwater discharge occurring through evapotranspiration (ET) and spring flow; the history of groundwater pumping from 1913 through 1998; groundwater recharge simulated as net infiltration; model boundary inflows and outflows based on regional hydraulic gradients and water budgets of surrounding areas; hydraulic conductivity and its relation to depth; and water levels appropriate for regional simulation of prepumped and pumped conditions within the DVRFS model domain. Simulation results appropriate for the regional extent and scale of the model were provided by acquiring additional data, by reevaluating existing data using current technology and concepts, and by refining earlier interpretations to reflect the current understanding of the regional groundwater flow system. Groundwater flow in the Death Valley region is composed of several interconnected, complex groundwater flow systems. Groundwater flow occurs in three subregions in relatively shallow and localized flow paths that are superimposed on deeper, regional flow paths. Regional groundwater flow is predominantly through a thick Paleozoic carbonate rock sequence affected by complex geologic structures from regional faulting and fracturing that can enhance or impede flow. Spring flow and ET are the dominant natural groundwater discharge processes. Groundwater also is withdrawn for agricultural, commercial, and domestic uses. Groundwater flow in the DVRFS was simulated using MODFLOW-2000, the U.S. Geological Survey 3D finitedifference modular groundwater flow modeling code that incorporates a nonlinear least-squares regression technique to estimate aquifer parameters. The DVRFS model has 16 layers of defined thickness, a finite-difference grid consisting of 194 rows and 160 columns, and uniform cells 1,500 meters (m) on each side. Prepumping conditions (before 1913) were used as the initial conditions for the transient-state calibration. The model uses annual stress periods with discrete recharge and discharge components. Recharge occurs mostly from infiltration of precipitation and runoff on high mountain ranges and from a small amount of underflow from adjacent basins. Discharge occurs primarily through ET and spring discharge (both simulated as drains) and water withdrawal by pumping and, to a lesser amount, by underflow to adjacent basins simulated by constant-head boundaries. All parameter values estimated by the regression are reasonable and within the range of expected values. The simulated hydraulic heads of the final calibrated transient model generally fit observed heads reasonably well (residuals with absolute values less than 10 meters) with two exceptions: in most areas of nearly flat hydraulic gradient the fit is considered moderate (residuals with absolute values of 10 to 20 meters), and in areas of steep hydraulic gradient along the Eleana Range and western part of Yucca Flat, southern part of the Owlshead Mountains, southern part of the Bullfrog Hills, and the north-northwestern part of the model domain (residuals with absolute values greater than 20 meters). Groundwater discharge residuals are fairly random, with as many areas where simulated flows are less than observed flows as areas where simulated flows are greater. The highest unweighted groundwater discharge residuals occur at Death Valley, Sarcobatus Flat (northeastern area), Tecopa, and early observations at Manse Spring in Pahrump Valley. High weighted-discharge residuals were computed in Indian Springs Valley and parts of Death Valley. Most of these inaccuracies in head and discharge can be attributed to insufficient representation of the hydrogeology in the HFM and(or) discharge estimates, misrepresentation of water levels, and(or) model error associated with grid-cell size. The model represents the large and complex groundwater flow system of the Death Valley region at a greater degree of refinement and accuracy than has been possible previously. The representation of detail provided by the 3D digital hydrogeologic framework model and the numerical groundwater flow model enabled greater spatial accuracy in every model parameter. The lithostratigraphy and structural effects of the hydrogeologic framework; recharge estimates from simulated net infiltration; discharge estimates from ET, spring flow, and pumping; and boundary inflow and outflow estimates all were reevaluated, some additional data were collected, and accuracy was improved. Uncertainty in the results of the flow model simulations can be reduced by improving on the quality, interpretation, and representation of the water-level and discharge observations used to calibrate the model and improving on the representation of the HGU geometries, the spatial variability of HGU material properties, the flow model physical framework, and the hydrologic conditions.

California, Nevada↗
USGS2009

Mercury flux to sediments of Lake Tahoe, California–Nevada

We report estimates of mercury (Hg) flux to the sediments of Lake Tahoe, California–Nevada: 2 and 15–20 µg/m 2 /year in preindustrial and modern sediments, respectively. These values result in a modern to preindustrial flux ratio of 7.5–10, which is similar to flux ratios recently reported for other alpine lakes in California, and greater than the value of 3 typically seen worldwide. We offer plausible hypotheses to explain the high flux ratios, including (1) proportionally less photoreduction and evasion of Hg with the onset of cultural eutrophication and (2) a combination of enhanced regional oxidation of gaseous elemental Hg and transport of the resulting reactive gaseous Hg to the surface with nightly downslope flows of air. If either of these mechanisms is correct, it could lead to local/regional solutions to lessen the impact of globally increasing anthropogenic emissions of Hg on Lake Tahoe and other alpine ecosystems.

California, Nevada↗
USGS2009

Transport and natural attenuation of Cu, Zn, As, and Fe in the acid mine drainage of Leviathan and Bryant Creeks

The Leviathan and Bryant Creek (LBC) drainage system, on the border of California and Nevada, flows through overburden and waste from a former open-pit sulfur mine. The drainage contains acid mine waters with high concentrations of several trace elements, including Cu, Zn, and As, derived from oxidative weathering of sulfides in the wastes and altered bedrock. In June and October, 1982, the mainstream and tributary flows of the LBC drainage were measured and the waters sampled and analyzed for major and trace elements. Empirical mass flow and metal attenuation rates were determined, and chemical models were used to examine mechanisms of trace element removal during downstream transport. In June the flow in the mainstream was 2-5 times greater than in October, and with higher contributions from the acid mine effluent. Seasonal variations in the attenuation rates of Cu, Zn, and As were directly related to this increase in acid mine-effluent production, and to the consequent increase in the acidity of the mainstream drainage. Although As concentrations immediately below the mine site were high in June, As was readily removed from solution by adsorption onto an assumed iron(III) oxyhydroxysulfate precipitate, whereas Cu was incompletely adsorbed and Zn remained unaffected by adsorption. In October, the smaller discharge of acidic LBC drainage waters were more readily diluted (and neutralized) by other regional tributaries. Arsenic concentrations remained low, and both Cu and Zn were removed from solution by adsorption onto iron(III) oxyhydroxysulfate in the lower regions of the LBC drainage system.

California, Nevada↗
USGS2009

Groundwater quality data for the Tahoe-Martis study unit, 2007: Results from the California GAMA Program

Groundwater quality in the approximately 460-square-mile Tahoe–Martis study unit was investigated in June through September 2007 as part of the Priority Basin Project of the Groundwater Ambient Monitoring and Assessment (GAMA) Program. The GAMA Priority Basin Project was developed in response to the Groundwater Quality Monitoring Act of 2001 and is being conducted by the U.S. Geological Survey (USGS) in cooperation with the California State Water Resources Control Board (SWRCB). The study was designed to provide a spatially unbiased assessment of the quality of raw groundwater used for public water supplies within the Tahoe–Martis study unit (Tahoe–Martis) and to facilitate statistically consistent comparisons of groundwater quality throughout California. Samples were collected from 52 wells in El Dorado, Placer, and Nevada Counties. Forty-one of the wells were selected using a spatially distributed, randomized grid-based method to provide statistical representation of the study area (grid wells), and 11 were selected to aid in evaluation of specific water-quality issues (understanding wells). The groundwater samples were analyzed for a large number of synthetic organic constituents (volatile organic compounds [VOC], pesticides and pesticide degradates, and pharmaceutical compounds), constituents of special interest (perchlorate and N -nitrosodimethylamine [NDMA]), naturally occurring inorganic constituents (nutrients, major and minor ions, and trace elements), radioactive constituents, and microbial indicators. Naturally occurring isotopes (tritium, carbon-14, strontium isotope ratio, and stable isotopes of hydrogen and oxygen of water), and dissolved noble gases also were measured to help identify the sources and ages of the sampled groundwater. In total, 240 constituents and water-quality indicators were investigated. Three types of quality-control samples (blanks, replicates, and samples for matrix spikes) each were collected at 12 percent of the wells, and the results obtained from these samples were used to evaluate the quality of the data for the groundwater samples. Field blanks rarely contained detectable concentrations of any constituent, suggesting that data for the groundwater samples were not compromised by possible contamination during sample collection, handling or analysis. Differences between replicate samples were within acceptable ranges. Matrix spike recoveries were within acceptable ranges for most compounds. This study did not attempt to evaluate the quality of water delivered to consumers; after withdrawal from the ground, raw water typically is treated, disinfected, or blended with other waters to maintain water quality. Regulatory thresholds apply to water that is served to the consumer, not to raw groundwater. However, to provide some context for the results, concentrations of constituents measured in the raw groundwater were compared with regulatory and nonregulatory health-based thresholds established by the U.S. Environmental Protection Agency (USEPA) and the California Department of Public Health (CDPH), and with aesthetic and technical thresholds established by CDPH. Comparisons between data collected for this study and drinking-water thresholds are for illustrative purposes only and do not indicate of compliance or noncompliance with regulatory thresholds. The concentrations of most constituents detected in groundwater samples from the Tahoe–Martis wells were below drinking-water thresholds. Organic compounds (VOCs and pesticides) were detected in about 40 percent of the samples from grid wells, and most concentrations were less than 1/100th of regulatory and nonregulatory health-based thresholds, although the conentration of perchloroethene in one sample was above the USEPA maximum contaminant level (MCL-US). Concentrations of all trace elements and nutrients in samples from grid wells were below regulatory and nonregulatory health-based thresholds, with five exceptions. Concentrations of arsenic were above the MCL-US in 20 percent of the samples from grid wells. Gross alpha particle activity (MCL-US), boron (CDPH notification level, NL-CA), and molybdenum (USEPA lifetime health advisory, HAL-US) were each detected above thresholds in two of the samples from grid wells, and radon (proposed alternative MCL-US) was detected above the threshold in one sample from a grid well. Most of the samples from Tahoe–Martis grid wells had concentrations of major elements, total dissolved solids, and trace elements below the CDPH secondary maximum contaminant levels, nonenforceable thresholds set for aesthetic and technical concerns. Fifteen percent of the samples from grid wells contained iron, manganese, or total dissolved solids at concentrations above these levels.

California, Nevada↗
USGS2009

Geochemical database for igneous rocks of the ancestral Cascades Arc— Southern segment, California and Nevada

Volcanic rocks that form the southern segment of the Cascades magmatic arc are an important manifestation of Cenozoic subduction and associated magmatism in western North America. Until recently, these rocks had been little studied and no systematic compilation of existing composition data had been assembled. This report is a compilation of all available chemical data for igneous rocks that constitute the southern segment of the ancestral Cascades magmatic arc and complement a previously completed companion compilation that pertains to rocks that constitute the northern segment of the arc. Data for more than 2,000 samples from a diversity of sources were identified and incorporated in the database. The association between these igneous rocks and spatially and temporally associated mineral deposits is well established and suggests a probable genetic relationship. The ultimate goal of the related research is an evaluation of the time-space-compositional evolution of magmatism associated with the southern Cascades arc segment and identification of genetic associations between magmatism and mineral deposits in this region.

California, Nevada↗
USGS2009

Hydrogeology of the Lake Tahoe Basin, California and Nevada

Ground water in the Lake Tahoe basin is the primary source of domestic and municipal water supply and an important source of inflow to Lake Tahoe. Over the past 30-40 years, Federal, State, and local agencies, and research institutions have collected hydrologic data to quantify the ground-water resources in the Lake Tahoe basin. These data are dispersed among the various agencies and institutions that collected the data and generally are not available in a format suitable for basin-wide assessments. To successfully and efficiently manage the ground-water resources throughout the Lake Tahoe basin, the U.S. Geological Survey (USGS) in cooperation with the U.S. Forest Service (USFS) compiled and evaluated the pertinent geologic, geophysical, and hydrologic data, and built a geodatabase incorporating the consolidated and standardized data for the Lake Tahoe basin that is relevant for examining the extent and characteristics of the hydrogeologic units that comprise the aquifers.

California, Nevada↗
USGS2008

Noise in GPS displacement measurements from southern California and southern Nevada

Time series of position changes estimated from data from 236 continuously recording GPS receivers operating in Southern California and Southern Nevada are evaluated for noise models that characterize their temporal correlations. The lengths of the time series range between 3.5 and 10 years. After adjusting these data for postseismic deformation, offsets, and annual periodicities, I find that about one-half of the time series have temporal correlations that are categorized as either flicker or random-walk noise. The remaining time series can be best categorized as either a combination of flicker and random-walk; power law noise; first-order Gauss-Markov plus random-walk noise; or power law plus broadband, seasonal noise. A variety of geodetic monuments are used in Southern California and Nevada, including deeply braced designs, cement piers, pins drilled in outcrop, and buildings. When I evaluate the noise for each time series in terms of an estimate of the standard error in velocity, I find that the sites with the smallest errors are those located in Nevada using deeply braced monuments. Sites that are installed within regions of active pumping, both for groundwater and oil, had the largest standard errors in velocity. Comparison of monument stability, as measured by standard error in rate, with average, annual rainfall nearby indicates a marginally significant correlation. In addition, even though regional filtering removed much of the common-mode signals in these time series, there still remains a common-mode seasonal signal which can and should be removed.

California, Nevada↗
USGS2008

A Miocene to Pleistocene climate and elevation record of the Sierra Nevada (California)

Orographic precipitation of Pacific-sourced moisture creates a rain shadow across the central part of the Sierra Nevada (California) that contrasts with the southern part of the range, where seasonal monsoonal precipitation sourced to the south obscures this rain shadow effect. Orographic rainout systematically lowers the hydrogen isotope composition of precipitation (δ D ppt ) and therefore δ D ppt reflects a measure of the magnitude of the rain shadow. Hydrogen isotope compositions of volcanic glass (δ D glass ) hydrated at the earth's surface provide a unique opportunity to track the elevation and precipitation history of the Sierra Nevada and adjacent Basin and Range Province. Analysis of 67 well dated volcanic glass samples from widespread volcanic ash-fall deposits located from the Pacific coast to the Basin and Range Province demonstrates that between 0.6 and 12.1 Ma the hydrogen isotope compositions of meteoric water displayed a large (>40‰) decrease from the windward to the leeward side of the central Sierra Nevada, consistent with the existence of a rain shadow of modern magnitude over that time. Evidence for a Miocene-to-recent rain shadow of constant magnitude and systematic changes in the longitudinal climate and precipitation patterns strongly suggest that the modern first-order topographic elements of the Sierra Nevada characterized the landscape over at least the last 12 million years.

California, Nevada↗
USGS2008

Traveltime data for the Truckee River between Tahoe City, California, and Vista, Nevada, 2006 and 2007

Traveltime measurements were made during 2006 and 2007 along the Truckee River between Tahoe City, Calif., and Vista, Nev. Fluorescent rhodamine WT dye was injected at various locations along the river during streamflows ranging from 143 to 2,660 cubic feet per second. The resulting data, presented in tabular and graphic form, may be useful to water-quality modelers or water-resources managers concerned with predicting the movement of soluble contaminants accidentally spilled into the Truckee River. The data provided in this report also could be used to determine the dispersion-related characteristics (duration and magnitude of pollutant concentrations) that may be expected in the Truckee River.

California, Nevada↗
USGS2008

Calculation of the rate of M≥6.5 earthquakes for California and adjacent portions of Nevada and Mexico

One of the key issues in the development of an earthquake recurrence model for California and adjacent portions of Nevada and Mexico is the comparison of the predicted rates of earthquakes with the observed rates. Therefore, it is important to make an accurate determination of the observed rate of M>6.5 earthquakes in California and the adjacent region. We have developed a procedure to calculate observed earthquake rates from an earthquake catalog, accounting for magnitude uncertainty and magnitude rounding. We present a Bayesian method that corrects for the effect of the magnitude uncertainty in calculating the observed rates. Our recommended determination of the observed rate of M>6.5 in this region is 0.246 ± 0.085 (for two sigma) per year, although this rate is likely to be underestimated because of catalog incompleteness and this uncertainty estimate does not include all sources of uncertainty.

California, Nevada↗
USGS2008

Preliminary geologic map of the southern Funeral Mountains and adjacent ground-water discharge sites, Inyo County, California, and Nye County, Nevada

This map covers the southern part of the Funeral Mountains, and adjacent parts of four structural basins - Furnace Creek, Amargosa Valley, Opera House, and central Death Valley. It extends over three full 7.5-minute quadrangles, and parts of eleven others - a total area of about 950 square kilometers. The boundaries of this map were drawn to include all of the known proximal hydrogeologic features that may affect the flow of ground water that discharges from the springs of the Furnace Creek wash area, in the west-central part of the map. These springs provide the major potable water supply for Death Valley National Park.

California, Nevada↗
USGS2007

Stratigraphy, paleomagnetism, and anisotropy of magnetic susceptibility of the Miocene Stanislaus Group, central Sierra Nevada and Sweetwater Mountains, California and Nevada

Paleomagnetism and anisotropy of magnetic susceptibility (AMS) reveal pyroclastic flow patterns, stratigraphic correlations, and tectonic rotations in the Miocene Stanislaus Group, an extensive volcanic sequence in the central Sierra Nevada, California, and in the Walker Lane of California and Nevada. The Stanislaus Group (Table Mountain Latite, Eureka Valley Tuff, and the Dardanelles Formation) is a useful stratigraphic marker for understanding the post–9-Ma major faulting of the easternmost Sierra Nevada, uplift of the mountain range, and transtensional tectonics within the central Walker Lane. The Table Mountain Latite has a distinctively shallow reversed-polarity direction (I = −26.1°, D = 163.1°, and α 95 = 2.7°) at sampling sites in the foothills and western slope of the Sierra Nevada. In ascending order, the Eureka Valley Tuff comprises the Tollhouse Flat Member (I = −62.8°, D = 159.9°, α 95 = 2.6°), By-Day Member (I = 52.4°, D = 8.6°, α 95 = 7.2°), and Upper Member (I = 27.9°, D = 358.0°, α 95 = 10.4°). The Dardanelles Formation has normal polarity. From the magnetization directions of the Eureka Valley Tuff in the central Walker Lane north of Mono Lake and in the Anchorite Hills, we infer clockwise, vertical-axis rotations of ∼10° to 26° to be a consequence of dextral shear. The AMS results from 19 sites generally show that the Eureka Valley Tuff flowed outward from its proposed source area, the Little Walker Caldera, although several indicators are transverse to radial flow. AMS-derived flow patterns are consistent with mapped channels in the Sierra Nevada and Walker Lane.

California, Nevada↗
USGS2006

Heterogeneity in fire severity within early season and late season prescribed burns in a mixed-conifer forest

Structural heterogeneity in forests of the Sierra Nevada was historically produced through variation in fire regimes and local environmental factors. The amount of heterogeneity that prescription burning can achieve might now be more limited owing to high fuel loads and increased fuel continuity. Topography, woody fuel loading, and vegetative composition were quantified in plots within replicated early and late season burn units. Two indices of fire severity were evaluated in the same plots after the burns. Scorch height ranged from 2.8 to 25.4 m in early season plots and 3.1 to 38.5 m in late season plots, whereas percentage of ground surface burned ranged from 24 to 96% in early season plots and from 47 to 100% in late season plots. Scorch height was greatest in areas with steeper slopes, higher basal area of live trees, high percentage of basal area composed of pine, and more small woody fuel. Percentage of area burned was greatest in areas with less bare ground and rock cover (more fuel continuity), steeper slopes, and units burned in the fall (lower fuel moisture). Thus topographic and biotic factors still contribute to the abundant heterogeneity in fire severity with prescribed burning, even under the current high fuel loading conditions. Burning areas with high fuel loads in early season when fuels are moister may lead to patterns of heterogeneity in fire effects that more closely approximate the expected patchiness of historical fires.

California, Nevada↗
USGS2006

Back to the basics: Lake Tahoe, California /Nevada: Geography and mathematics

Back to the Basics: Lake Tahoe, California/Nevada* continues the Wetland Education Through Maps and Aerial Photography (WETMAAP) Program of exercises on teaching foundational map reading and spatial differentiation skills. It is the third published exercise from the Back to the Basics series developed by the WETMAAP Program. The current exercise modified is from the Lake Tahoe Back to the Basics workshop offered during the annual National Council for Geographic Education meeting. The focus of this exercise is on geography and mathematics, a unification of skills for spatial analysis and measurement.

California, Nevada↗
USGS2006

Ground-water modeling of the Death Valley Region, Nevada and California

The Death Valley regional ground-water flow system (DVRFS) of southern Nevada and eastern California covers an area of about 100,000 square kilometers and contains very complex geology and hydrology. Using a computer model to represent the complex system, the U.S. Geological Survey simulated ground-water flow in the Death Valley region for use with U.S. Department of Energy projects in southern Nevada. The model was created to help address contaminant cleanup activities associated with the underground nuclear testing conducted from 1951 to 1992 at the Nevada Test Site and to support the licensing process for the proposed geologic repository for high-level nuclear waste at Yucca Mountain, Nevada.

California, Nevada↗
USGS2006

A simulation model of land-use change in the Lake Tahoe Basin of California and Nevada, as used in a decision-support system

The Tahoe Land-Use Change model is a stochastic, spatially explicit simulation of future land-use change—in particular, development and retirement of individual parcels—in the Lake Tahoe Basin of California and Nevada. The Federal, State, and regional management agencies responsible for the basin are revising and integrating their 20-year plans to meet various goals, including maintaining or improving several environmental (e.g., lake clarity, forest health) and socioeconomic (e.g., affordable housing) characteristics. To assist this effort, the model projects the long-term outcomes of land-use-management decisions, including those relating to existing and potential government regulations, development activities, and conservation practices. The model results are probabilistic maps of parcel-specific changes in land use and the resulting changes in the amount and locations of developed parcels and land-use change. To capture the uncertainties and variation in the exact parcels of land selected for development or retirement by individuals acting in the basin, a single model run includes multiple iterations, from which cumulative statistics are taken to describe the results. The purpose of the model is to generate changes in the amounts and types of land use and land cover that form inputs to a basinwide model of pollutant loading to Lake Tahoe, which, in turn, generates inputs to a lake-clarity model. Together, these three models form a chain of tools that link land-use decisions to changes in a critical environmental quality—the clarity of Lake Tahoe—within a decision-support context. Eventually, these three models will become part of a larger, more complete decision-support system.

California, Nevada↗