Geology topics

Scott Boyce

Publications and source records attributed to Scott Boyce.

18 recordsLinked to original sources

USGS2026

Salinas Valley integrated hydrologic and reservoir operations models, Monterey and San Luis Obispo Counties, California

The area surrounding the Salinas Valley groundwater basin in Monterey and San Luis Obispo Counties of California is a highly productive agricultural area, contributes substantially to the local economy, and provides a substantial portion of vegetables and other agricultural commodities to the Nation. This region of California provides about half of the Nation’s lettuce, celery, broccoli, and spinach each year. Thus, this agricultural area provides substantial volumes of agricultural products not just for California but for the United States. Changes in population and increased agricultural development, which includes a shift toward more water-intensive crops, and climate variability, have put increasing demand on both surface-water and groundwater resources in the valley. This situation has resulted in water management challenges in the Salinas Valley that generally relate to the distribution of the water supply throughout the basin. Where and when the water is present in the surface and subsurface does not coincide with where and when the water is needed. Historically, to deal with the distribution issue, water has been used conjunctively in the valley. Conjunctive use is a water management strategy that coordinates surface-water and groundwater use to maximize water availability. Groundwater is used throughout the Salinas Valley to meet water demands when surface-water supplies are insufficient. The availability of surface water is constrained by climate. Precipitation and streamflow vary seasonally and year to year. Although there are two reservoirs in the Salinas Valley to capture and store water during wet periods, the only conveyance of reservoir water to coastal agricultural areas is the Salinas River. Increasing demand for groundwater and surface-water resources throughout the Salinas Valley has resulted in undesirable effects from unsustainable water use, such as surface-water depletion, groundwater-level declines, storage depletion in the principal aquifers, and seawater intrusion. To address these escalating issues, local communities, water management agencies, and groundwater sustainability agencies are evaluating how to sustainably manage both their surface-water and groundwater resources. To meet water demands and reduce the undesirable effects of unsustainable water use, continued conjunctive management of surface water and groundwater would ideally incorporate strategies to deal with increases in demand and climate variability. To evaluate the challenging water management issues in the Salinas Valley, the U.S. Geological Survey, Monterey County Water Resources Agency, and the Salinas Valley Basin Groundwater Sustainability Agency developed a comprehensive suite of models that represent the Salinas Valley hydrogeologic system called the Salinas Valley System Model. The geologic framework is known as the Salinas Valley Geologic Framework and was developed to characterize the subsurface using various topographic and geologic data sources, including information on hydrogeologic units, their surfaces and extents, geologic structures, lithology, and elevations from borehole data and cross sections, as well as details on faults and existing models. The surface-water model is called the Salinas Valley Watershed Model and simulates the Salinas River watershed. Monthly surface-water inflows into the integrated hydrologic model domain were simulated using the Salinas Valley Watershed Model. The historical model uses historical climate data, water and land use data, and reservoir releases to simulate agricultural operations, including landscape water demands, diversions, and reclaimed wastewater. The operational model adds an embedded reservoir operations framework to the simulation of the historical model that allows specified operational rules to simulate reservoir releases and changes in reservoir storage. The operational model assumes current reservoir operations and constant land use, which differs from historical conditions. Thus, the operational model is a hypothetical baseline model that can be used by local water managers to evaluate and quantify potential benefits of water supply projects. Together, the geologic framework, watershed, historical, and operational models form a tool that can be used to simulate irrigated agriculture and associated reservoir operations of the integrated hydrologic system of the Salinas Valley.

California↗

USGS2026

Modeling future groundwater depletion to evaluate sustainability goals set under the Sustainable Groundwater Management Act in the critically overdrafted basins of the Central Valley, California, USA (2020–2070)

In 2014, California's Sustainable Groundwater Management Act (SGMA) mandated local agencies to devise and implement groundwater sustainability plans to address critically overdrafted conditions throughout the state's aquifers. However, the feasibility of these agencies' sustainability goals has not previously been assessed through a regional-scale, integrative lens. Here, we develop and analyze a novel, basin-wide database of 936 sustainability indicator wells located within Central Valley subbasins designated as critically overdrafted, most of which lie in the San Joaquin Valley. Our database shows 2040 groundwater elevation goals vary widely from 60 m above to 80 m below 2020 levels, with variability within and between adjacent subbasins. To evaluate the feasibility of achieving these goals, we coupled the database with a regional hydrologic model (Central Valley Hydrologic Model version 2) and simulated multiple future pumping scenarios. Results show that under increased groundwater demand, 60%–70% of indicator wells may fail to meet their 2040 goals. Even a 50% reduction from 2020 demand levels leaves nearly 40% of wells failing to meet their sustainability thresholds by 2040. Baseline models show that by 2070, up to 70% of wells could fail to meet their goals due to large-scale, spatially connected regions of groundwater depletion. This integrated framework, linking the first region-wide compilation of SGMA indicator wells with a regional groundwater model, demonstrates that many local sustainability goals may be unattainable with substantial (up to 50%) reductions in pumping. Additional management interventions, such as expanded recharge or coordinated demand reductions, may help achieve sustainability goals.

California↗

USGS2025

Salinas Valley integrated hydrologic and reservoir operations models, Monterey and San Luis Obispo Counties, California

The area surrounding the Salinas Valley groundwater basin in Monterey and San Luis Obispo Counties of California is a highly productive agricultural area, contributes significantly to the local economy, and provides a substantial portion of vegetables and other agricultural commodities to the Nation. This region of California provides about half of the Nation’s lettuce, celery, broccoli, and spinach each year. Thus, this agricultural area provides significant volumes of agricultural products not just for California but the entire United States. Changes in population and increased agricultural development, which includes a shift toward more water-intensive crops, and climate variability, have put increasing demand on both surface water and groundwater resources in the valley. This has resulted in water management challenges in the Salinas Valley that are predominantly related to distribution of water supply throughout the basin. Where and when the water is present in the surface and subsurface does not coincide with where and when the water is needed. To deal with the distribution issue, historically water has been used conjunctively in the valley. Conjunctive use is a water management strategy that coordinates surface water and groundwater use to maximize water availability. Groundwater is used throughout the Salinas Valley to meet water demands when surface water supplies are insufficient. Availability of surface water is constrained by climate. Precipitation and streamflow vary seasonally and year to year. Although there are two reservoirs in the Salinas Valley to capture and store water during wet periods, the only conveyance of reservoir water to coastal agricultural areas is the Salinas River. Increasing demand on groundwater and surface water resources throughout the Salinas Valley has resulted in undesirable effects of unsustainable water use, such as surface water depletion, groundwater level declines, storage depletion in the principal aquifers, and seawater intrusion. To address these escalating issues, local communities, water management agencies, and groundwater sustainability agencies are evaluating how to sustainably manage both their surface water and groundwater resources. To meet water demands and reduce undesirable effects of unsustainable water use, continued conjunctive management of surface water and groundwater would ideally incorporate strategies to deal with increases in demand and a variable climate. To evaluate the challenging water management issues in the Salinas Valley, the U.S. Geological Survey, Monterey County Water Resource Agency, and the Salinas Valley Basin Groundwater Sustainability Agency developed a comprehensive suite of models that represent the Salinas Valley Hydrogeologic system called the Salinas Valley System Model. The Salinas Valley Geologic Framework was developed to characterize the subsurface using various topographic and geologic data sources, including information on hydrogeologic units, their surfaces and extents, geologic structures, lithology, and elevations from borehole data and cross sections, as well as details on faults and existing models. The Salinas Valley Watershed Model simulates the entire Salinas River watershed. Monthly surface water inflows into the integrated hydrologic model domain were simulated using the Salinas Valley Watershed Model. The historical model uses historical climate data, water and land use data, and reservoir releases to simulate agricultural operations, including landscape water demands, diversions, and reclaimed wastewater. The operational model adds an embedded reservoir operations framework to the simulation of the historical model that allows specified operational rules to simulate reservoir releases and changes in reservoir storage. The operational model assumes current reservoir operations and constant land use, which differs from historical conditions. Thus, the operational model is a hypothetical baseline model that can be used by local water managers to evaluate and quantify potential benefits of water supply projects. Together, the geologic framework, watershed, historical, and operational models form a tool that can be used to simulate irrigated agriculture and associated reservoir operations of the integrated hydrologic system of the Salinas Valley.

EarthArXiv↗

USGS2024

Groundwater sustainability and land subsidence in California’s Central Valley

The Central Valley of California is one of the most prolific agricultural regions in the world. Agriculture is reliant on the conjunctive use of surface-water and groundwater. The lack of available surface-water and land-use changes have led to pumping-induced groundwater-level and storage declines, land subsidence, changes to streamflow and the environment, and the degradation of water quality. As a result, in part, the Sustainable Groundwater Management Act (SGMA) was developed. An examination of the components of SGMA and contextualizing regional model applications within the SGMA framework was undertaken to better understand and quantify many of the components of SGMA. Specifically, the U.S. Geological Survey (USGS) updated the Central Valley Hydrologic Model (CVHM) to assess hydrologic system responses to climatic variation, surface-water availability, land-use changes, and groundwater pumping. MODFLOW-OWHM has been enhanced to simulate the timing of land subsidence and attribute its inelastic and elastic portions. In addition to extending CVHM through 2019, the new version, CVHM2, includes several enhancements as follows: managed aquifer recharge (MAR), pumping with multi-aquifer wells, inflows from ungauged watersheds, and more detailed water-balance subregions, streamflow network, diversions, tile drains, land use, aquifer properties, and groundwater level and land subsidence observations. Combined with historical approximations, CVHM2 estimates approximately 158 km 3 of storage loss in the Central Valley from pre-development to 2019. About 15% of the total storage loss is permanent loss of storage from subsidence that has caused damage to infrastructure. Climate extremes will likely complicate the efforts of water managers to store more water in the ground. CVHM2 can provide data in the form of aggregated input datasets, simulate climatic variations and changes, land-use changes or water management scenarios, and resulting changes in groundwater levels, storage, and land subsidence to assist decision-makers in the conjunctive management of water supplies.

California↗

USGS2024

Evaluating seawater intrusion forecast uncertainty under climate change in the Pajaro Valley, California

Climate change and climate variability impacts such as rising sea levels have the potential to exacerbate seawater intrusion and the strain on coastal freshwater resources in already stressed groundwater basins such as those in the Pajaro Valley groundwater basin, California. Regional hydrologic models are often coupled with climate projections to forecast future hydrologic conditions and inform adaptive resources management strategies. However, there is high uncertainty in the future projections of water resources due to uncertainties from downscaling global general circulation models (GCMs) to local scale climate change projections, future land use changes, and the inherent uncertainty of developed hydrologic models. Future climate projections and the magnitude of their influence on modeled hydrologic drivers are highly variable. Therefore, to develop a forecast model, an ensemble of different projections can be used to capture a wider range of basin responses and the associated uncertainties in the modeled forecasts. Understanding the reliability and uncertainty of forecasts is important for developing climate adaptation strategies such as developing protective thresholds, particularly at the basin scale where the impacts are felt, and adaptation is implemented. To demonstrate this, an uncertainty analysis of groundwater level and seawater intrusion forecasts for the Pajaro Valley groundwater basin was performed using an ensemble of three future climate projections with the Pajaro Valley Integrated Hydrologic Model (PVIHM) and the first-order second moment (FOSM) method. FOSM uncertainty analysis of hydrologic forecasts across a multi-GCM climate ensemble provides an upper and lower bound of potential impacts of climate change on sustainability targets related to mitigating seawater intrusion. The groundwater level forecasts’ narrow range of variability can help policymakers in adaptation planning by constraining possible outcomes to a focused range for risk-management decisions. However, less than one-third of groundwater level forecasts met the current protection thresholds to prevent chronic lowering of groundwater. Therefore, sustainability targets may need to be reassessed. Relative to groundwater level changes, the seawater intrusion forecasts had larger uncertainty due to the GCM climate projections and the simulated hydrologic response that were compounded by the propagation of scaling and bias from the GCMs and model simplifications in simulating the coastal boundary.

California↗

USGS2023

Using an open-source tool to develop a three-dimensional hydrogeologic framework of the Kobo Valley, Ethiopia

Groundwater resource management requires understanding the groundwater basin’s hydrogeology and would be improved with the development of a three-dimensional hydrogeologic framework model (HFM). A wide range of methods and software exist to quantify the extent, structure, and properties of geologic systems. However, most geologic software is proprietary and cost-prohibitive for use in developing countries. GemPy is a Python-based, open-source (no-cost) tool for generating three-dimensional geological models. This study uses available data and GemPy to develop the Kobo Valley Hydrogeologic Framework Model (KV-HFM), a three-dimensional HFM for Kobo Valley in northern Ethiopia, which is part of the East African Rift System. The KV-HFM is a conceptual model that comprises the hydrostratigraphy, structural features, and hydraulic properties of the Kobo Valley groundwater system. The limited data described the extent and altitude of the hydrostratigraphic units using the GemPy implicit potential–field interpolation. The KV-HFM showed the existence of an east-to-west, structural-based groundwater divide composed of volcanic rock and clay. This divide splits the catchment into two groundwater systems with limited interconnected flow. This study illustrates the use of open-source software for developing an HFM using sparse, existing geologic data.

Afar Depression, Kobo Valley catchment↗

USGS2023

Recharge estimation approach in a data-scarce semi-arid region, Northern Ethiopian Rift Valley

Sustainable management of groundwater resources highly relies on the accurate estimation of recharge. However, accurate recharge estimation is a challenge, especially in data-scarce regions, as the existing models are data-intensive and require extensive parameterization. This study developed a process-based hydrologic model combining local and remotely sensed data for characterizing recharge in data-limited regions using a Basin Characterization Model (BCM). This study was conducted in Raya and Kobo Valleys, a semi-arid region in Northern Ethiopia, considering both the structural basin and the surrounding mountainous recharge areas. Climatic Research Unit monthly datasets for 1991 to 2020 and WaPOR actual evapotranspiration data were used. The model results show that the average annual recharge and surface runoff from 1991 to 2020 were 73 mm and 167 mm, respectively, with a substantial portion contributed along the front of the mountainous parts of the study area. The mountainous recharge occurred along and above the valleys as mountain-block and mountain-front recharge. The long-term estimates of the monthly recharge time series indicated that the water balance components follow the temporal pattern of rainfall amount. However, the relation of recharge to precipitation was nonlinearly related, showing the episodic nature of recharge in semi-arid regions. This study informed the spatial and temporal distribution of recharge and runoff hydrologic variables at fine spatial scales for each grid cell, allowing results to be summarized for various planning units, including farmlands. One third of the precipitation in the drainage basin becomes recharge and runoff, while the remaining is lost through evapotranspiration. The current study’s findings are vital for developing plans for sustainable management of water resources in semi-arid regions. Also, monthly groundwater withdrawals for agriculture should be regulated in relation to spatial and temporal recharge patterns. We conclude that combining scarce local data with global datasets and tools is a useful approach for estimating recharge to manage groundwater resources in data-scarce regions.

Kobo Valley, Riya Valley↗

USGS2022

Klamath natural flow study, Upper Klamath Basin groundwater flow model

The purpose of the Upper Klamath Basin Groundwater Flow Model (UKBGFM) is to simulate groundwater conditions in the Upper Klamath Basin under historical and predevelopment conditions. The UKBGFM quantifies estimates of and changes in groundwater levels, storage, pumping, drainage flow to tile drains, evapotranspiration, and flow between the Upper Klamath Basin and neighboring basins. The quantifications of base flow to streams and seepage to and from lakes and reservoirs can be used as inputs to the RiverWare Mass Balance Model (Zagona and others, 2001), a companion model being developed as part of the Klamath Natural Flow Study (KNFS).

California, Oregon↗

USGS2020

Rio Grande transboundary integrated hydrologic model and water-availability analysis, New Mexico and Texas, United States, and northern Chihuahua, Mexico

Changes in population, agricultural development and practices (including shifts to more water-intensive crops), and climate variability are increasing demands on available water resources, particularly groundwater, in one of the most productive agricultural regions in the Southwest—the Rincon and Mesilla Valley parts of Rio Grande Valley, Doña Ana and Sierra Counties, New Mexico, and El Paso County, Texas. The goal of this study was to produce an integrated hydrological simulation model to help evaluate water-management strategies, including conjunctive use of surface water and groundwater for historical conditions, and to support long-term planning for the Rio Grande Project. This report describes model construction and applications by the U.S. Geological Survey, working in cooperation and collaboration with the Bureau of Reclamation. This model, the Rio Grande Transboundary Integrated Hydrologic Model, simulates the most important natural and human components of the hydrologic system, including selected components related to variations in climate, thereby providing a reliable assessment of surface-water and groundwater conditions and processes that can inform water users and help improve planning for future conditions and sustained operations of the Rio Grande Project (RGP) by the Bureau of Reclamation. Model development included a revision of the conceptual model of the flow system, construction of a Transboundary Rio Grande Watershed Model (TRGWM) water-balance model using the Basin Characterization Model, and construction of an integrated hydrologic flow model with MODFLOW-One-Water Hydrologic Flow Model version 2 (referred to as MF-OWHM2). The hydrologic models were developed for and calibrated to historical conditions of water and land use, and parameters were adjusted so that simulated values closely matched available measurements (calibration). The calibrated model was then used to assess the use and movement of water in the Rincon Valley, Mesilla Basin, and northern part of the Conejos-Médanos Basin, with the entire region referred to as the “Transboundary Rio Grande” or TRG. These tools provide a means to understand hydrologic system response to the evolution of water use in the region, its availability, and potential operational constraints of the RGP. The conceptual model identified surface-water and groundwater inflows and outflows that included the movement and use of water both in natural and in anthropogenic systems. The groundwater-flow system is characterized by a layered geologic sedimentary sequence combined with the effects of groundwater pumping, operation of the RGP, natural runoff and recharge, and the application of irrigation water at the land surface that is captured and reused in an extensive network of canals and drains as part of the conjunctive use of water in the region. Historical groundwater-level fluctuations followed a cyclic pattern that were aligned with climate cycles, which collectively resulted in alternating periods of wet or dry years. Periods of drought that persisted for one or more years are associated with low surface-water availability that resulted in higher rates of groundwater-level decline. Rates of groundwater-level decline also increased during periods of agricultural intensification, which necessitated increasing use of groundwater as a source of irrigation water. Agriculture in the area was initially dominated by alfalfa and cotton, but since 1970 more water-intensive pecan orchards and vegetable production have become more common. Groundwater levels substantially declined in subregions where drier climate combined with increased demand, resulting in periods of reduced streamflows. Most of the groundwater was recharged in the Rio Grande Valley floor, and most of the pumpage and aquifer storage depletion was in Mesilla Basin agricultural subregions. A cyclic imbalance between inflows and outflows resulted in the modeled cyclic depletion (groundwater withdrawals in excess of natural recharge) of the groundwater basin during the 75-year simulation period of 1940–2014. Changes in groundwater storage can vary considerably from year to year, depending on land use, pumpage, and climate conditions. Climatic drivers of wet and dry years can greatly affect all inflows, outflows, and water use. Although streamflow and, to a minor extent, precipitation during inter-decadal wet-year periods replenished the groundwater historically, contemporary water use and storage depletion could have reduced the effects of these major recharge events. The average net groundwater flow-rate deficit for 1953–2014 was estimated to be about 1,090 acre-feet per year.

Chihuahua, New Mexico, Texas↗

USGS2020

One-Water Hydrologic Flow Model: A MODFLOW based conjunctive-use simulation software

The U.S. Geological Survey’s (USGS) Modular Ground-Water Flow Model (MODFLOW-2005) is a computer program that simulates groundwater flow by using finite differences. The MODFLOW-2005 framework uses a modular design that allows for the easy development and incorporation of new features called processes and packages that work with or modify inputs to the groundwater-flow equation. A process solves a flow equation or set of equations. For example, the central part of MODFLOW is the groundwater-flow process that solves the groundwater-flow equation; the surface-water routing process is an additional process that solves the surface-water flow equation. Packages are code related to the groundwater-flow process. For example, the subsidence package modifies the groundwater-flow process by including aquifer compaction effects on flow. With the development of new packages and processes, the MODFLOW-2005 base framework diverged into multiple independent versions designed for specific simulation needs. This divergence limited each independent MODFLOW release to its specific purpose, so that there was no longer a single, comprehensive, general-purpose hydraulic-simulation framework. The MODFLOW One-Water Hydrologic Flow Model (MF-OWHM, also informally known as OneWater) is an integrated hydrologic flow model that combines multiple MODFLOW-2005 variants in one cohesive simulation software; changes were made to enable multiple capabilities in one code. This fusion of the MODFLOW-2005 versions resulted in a simulation software that can be used to address and analyze a wide class of conjunctive-use, water-management, water-food-security, and climate-crop-water scenarios. As a second core version of MODFLOW-2005, MF-OWHM maintains backward compatibility with existing MODFLOW-2005 versions, with features that include the following: Process-based simulation. Saturated groundwater flow (three-dimensional). Surface-water flow (one- and two-dimensional). Stream and river flow. Lake and reservoir storage. Landscape simulation and irrigated agriculture. Land-use and crop simulation. Root uptake of groundwater. Actual evapotranspiration. Estimated irrigation demand. Reservoir operations. Aquifer compaction and subsidence by vertical model-grid deformation. Seawater intrusion by a sharp-interface assumption. Karst-aquifer and fractured-bedrock flow. Turbulent and laminar-pipe network flow. Unsaturated groundwater flow (one-dimensional). Internal linkages among the processes that couple hydraulic head, flow, and deformation. Redesigned code for faster simulation, increased user-input options, easier model updates, and more robust error reporting than in previous models. MF-OWHM is a MODFLOW-2005 based integrated hydrologic model that can simulate and analyze varying environmental conditions to allow for the evaluation of management options from many components of human and natural water movement through a physically based, supply and demand framework. The term “integrated,” in the context of this report, refers to the tight coupling of groundwater flow, surface-water flow, landscape processes, aquifer compaction and subsidence, reservoir operations, and conduit (karst) flow. Another benefit of this integrated hydrologic model is that models developed to run by MODFLOW-2005, MODFLOW-NWT, MODFLOW-CFP, or MODFLOW-FMP can also be simulated with MF-OWHM. At the time of this report’s publication, MF-OWHM version 2 (MF-OWHM2) does not include a direct internal simulation of snowmelt, advanced mountainous watershed rainfall-runoff simulation, detailed shallow soil-moisture accounting, or atmospheric moisture content. Atmospheric moisture may be accounted for indirectly by, optionally, specifying a pan-evaporation rate, reference evapotranspiration, and precipitation. These features are not included to ensure that simulation runtime remains short enough to enable the use of automated methods of calibrating model parameters to field observations, which typically require many simulation model runs. The MF-OWHM approach is to include as much detail as possible to simulate hydrological processes, providing the simulation runtimes remain reasonable enough to allow for robust parameter estimation and model calibration. To represent both natural and human-influenced flow, MF-OWHM integrates physically based flow processes derived from MODFLOW-2005 in a supply and demand framework. From this integration, the physically based movement of groundwater, surface water, imported water, and precipitation serve as supply to meet consumptive demands associated with irrigated and non-irrigated agriculture, natural vegetation, and urban water uses. Water consumption is determined by balancing the available water supply with water demand, leading to the concept of a demand-driven, supply-constrained simulation. The MF-OWHM Supply-and-Demand Framework is especially useful for the analysis of agricultural water use, where there are often few data available to describe changes in land-use through time, such as crop type and distribution, and the associated changes in groundwater pumpage. This framework attempts to satisfy each land-use water demand with available water supplies—that is, groundwater uptake, precipitation, and irrigation. An option provided in MF-OWHM2 is to automatically increase groundwater pumping for irrigation, which often is unknown, by the calculated residual between demand and the other available sources of supply. From large- to small-scale applications, the physically based supply and demand framework provides key capabilities for simulating and analyzing historical, current, and future conjunctive-use of surface water and groundwater. To achieve the physically based supply and demand framework, the MODFLOW-2005 standard of no inter-package and -process communication was relaxed for MF-OWHM2. Traditional MODFLOW simulation models required that all packages and processes interact through the groundwater-flow equation or by removing the water flow from the simulation domain. For example, the MODFLOW-2005 representation of a groundwater well extracts water from the groundwater-flow equation (by subtraction) and removes it from the simulation domain. This feature is available in the MF-OWHM framework, but options have been added to allow the specification of a use or destination of pumped groundwater within the model domain, for example, it can be used for irrigation, managed aquifer recharge, or return-flow to streams.

Techniques and Methods↗

USGS2020

Modeling the surface water and groundwater budgets of the US using MODFLOW-OWHM

Assessments of groundwater and surface water budgets at a large scale, such as the contiguous United States, often separately analyze the complex dynamics linking the surface and subsurface categories of water resources. These dynamics include recharge and groundwater contributions to streamflow. The time-varying simulation of these complex hydrologic dynamics, across large spatial and temporal scales, remains a scientific challenge due to the complexity of the processes and data availability. In this study, groundwater fluxes and surface hydrologic processes are simulated across the contiguous US for 1950-2010. The simulation estimates the monthly water budget components, such as groundwater recharge, surface runoff, and evapotranspiration; streamflow in major rivers is routed while accounting for groundwater exchange. Human impacts are included through groundwater pumping, and climate variability is included, including variability in precipitation, temperature and potential evapotranspiration. The simulated groundwater level and river discharge have strong correlation with USGS observation wells and streamflow gages, with R 2 values of 0.992 and 0.946, respectively. The simulated evapotranspiration is compared with three other published estimation methods, showing that it is able to capture the magnitude and seasonality of evapotranspiration over the Mississippi River basin. As such, the model is able to reasonably simulate the surface and groundwater budgets over the US, allowing for questions of the relative importance of climate and human impacts to be explored in the future.

Advances in Water Resources↗

USGS2019

Integrated hydrologic modeling of the Salinas River, California, for sustainable water management

The Salinas River is the largest river in California’s Central Coast region. Groundwater resources of the Salinas River basin are used to meet water supply needs, including crop irrigation and municipal water supply. Two large multipurpose reservoirs also supply irrigation and municipal water uses. Historical imbalances between supply and demand have resulted in sinking groundwater levels, seawater intrusion, regulatory actions on pumping, adjudication, and requirements for minimum in-stream fish flows. Present needs include finding replacement water supplies and improving watershed management to comply with legal mandates, adapt to future climate variability and landuse conversions, and improve environmental conditions. The Salinas Valley Integrated Hydrologic Model (SVIHM) was developed to help water managers evaluate and adjust to projected impacts on water supplies and demands in the Salinas Valley watershed caused by changes in land use, population, and climate. The SVIHM includes four modeling components: (1) the Basin Characterization Model (BCM), (2) the Hydrologic Simulation Program – FORTRAN (HSPF), (3) MODFLOW - One Water Hydrologic Model (MF-OWHM), and (4) the Surface Water Operations (SWO) package. The BCM and HSPF components compose the Salinas Valley Watershed Model (SVWM). The 4,530 square-mile (mi2) SVWM domain encompasses the entire Salinas River watershed, as well as coastal drainages adjacent to the Salinas River outflow, and includes two separate and connected HSPF model domains, the 2,540 mi2 upper Salinas River and the 1,990 mi2 lower Salinas River models. SVWM (1) simulates the water budget for the entire Salinas River basin containing both the SVIHM domain as well as the mountainous terrain of the tributary headwater areas not included in the SVIHM; and (2) was used to develop the 148 boundary inflows for the SVIHM. Simulated evapotranspiration (ET) is the largest component of the water budget after precipitation, with a 71-year average basin-wide ET of 13.9 in/yr, compared to the basin-wide average precipitation of 18.4 in/yr. Simulated ET ranges from 15 to 29 in/yr along the western side of the SVWM to less than 10 in/yr throughout the valley floor and in the southeast part of the Salinas River watershed. The simulated total 71-year average inflow to the SVIHM was 890 ft3/sec (about 640,000 acre-feet per year), with the highest average inflow of 270 ft3/sec simulated for the Nacimiento River; whereas, the simulated 71-year average streamflow at the mouth of the Salinas River was only about 190 ft3/sec, indicating that most of the streamflow generated in the Salinas River basin is lost to channel seepage. The lack of sustained baseflow causes streamflow to be highly sensitive to the temporal variability in precipitation, especially during the drier periods, and this increases the importance of developing adequate reservoir management, flow augmentation, and conjunctive water use scenarios for potential future drought periods and potentially increased temporal variability in precipitation.

California↗

USGS2018

Santa Barbara and Foothill groundwater basins Geohydrology and optimal water resources management—Developed using density dependent solute transport and optimization models

Groundwater has been a part of the city of Santa Barbara’s water-supply portfolio since the 1800s; however, since the 1960s, the majority of the city’s water has come from local surface water, and the remainder has come from groundwater, State Water Project, recycled water, increased water conservation, and as needed, seawater desalination. Although groundwater from the Santa Barbara and Foothill groundwater basins only accounts for a small percentage of the long-term supply, it is an important source of supplemental water during times of surface-water shortages. During the late 1980s and early 1990s, production wells extracted additional groundwater to compensate for drought related water-delivery shortfalls from other sources; in response, water levels declined substantially in the Santa Barbara and Foothill groundwater basins (below sea level in the Santa Barbara groundwater basin). In coastal basins that have groundwater extraction near shore, seawater intrusion is often a problem. Seawater intrusion in the Santa Barbara groundwater basin is thought to be more limited than in other coastal basins because of an offshore fault that acts as a partial barrier to groundwater flow. During the late 1980s and early 1990s, seawater intrusion was observed in the Santa Barbara groundwater basin, as indicated by increased chloride concentrations at several monitoring wells that ranged from 200 ft to 1,300 ft from the ocean and as close as 2,900 ft to the nearest pumping well. This demonstrated that seawater can intrude into the Santa Barbara groundwater basin when groundwater levels fall below sea level near the coast. The city of Santa Barbara is interested in developing a better understanding of the sustainability of its groundwater supplies. In 2014, California adopted historic legislation to manage its groundwater: the Sustainable Groundwater Management Act (SGMA). The SGMA requires the development and implementation of “Groundwater Sustainability Plans” in 127 priority groundwater basins; although Santa Barbara was not a designated priority basin, the city is taking steps to achieve sustainability. Sustainability was defined in the SGMA in terms of avoiding undesirable results: significant and unreasonable groundwater-level declines, reduction in groundwater storage, seawater intrusion, water-quality degradation, land subsidence, and surface-water depletion. In this project, a cooperative study between the U.S. Geological Survey (USGS) and the city of Santa Barbara, sustainable yield is defined as the volume of groundwater that can be pumped from storage without causing water-level drawdowns and the associated increases in seawater intrusion (as indicated by increases in measured chloride concentrations) at selected wells. In order to estimate the sustainability of Santa Barbara’s groundwater basins, a three-dimensional density-dependent groundwater-flow and solute-transport model (the Santa Barbara Flow and Transport Model, or SBFTM) was developed on the basis of an existing groundwater-flow model. To simulate seawater intrusion to the Santa Barbara Basin under various management strategies, the SBFTM uses the USGS code SEAWAT to simulate salinity transport and variable-density flow. The completed SBFTM was coupled with a management optimization tool, in this case a multi-objective evolutionary algorithm, to determine optimal pumping strategies that maximize the sustainable yield and at the same time satisfy user-defined drawdown and chloride-concentration constraints. As part of this study, a three-dimensional hydrogeologic framework model was developed to quantify the extent and hydrogeologic characteristics of the Santa Barbara and Foothill groundwater basins and to help define the discretization and hydraulic properties used in the SBFTM. The development of the hydrogeologic framework model required the collection and reconciliation of geologic and geophysical data from existing maps, reports, and databases, along with geologic and hydrologic data from recently drilled wells. These data were integrated into a three-dimensional hydrogeologic framework model that defines the stratigraphy and geometry of the aquifer zones and the major geologic structures in the basin. The hydrogeologic framework model also quantifies the variation in sediment grain size within each aquifer zone as the percentage of coarse-grained sediment. Previous studies indicated that there are two principal water-producing zones in the Santa Barbara groundwater basin, the upper and lower producing zones; an additional thin, productive zone was identified as part of this study. This “middle producing zone” is not as areally extensive as the upper and lower producing zones and only exists in the coastal part of Storage Unit I. These producing zones are bounded at depth by less productive shallow, middle, and deep zones. Two versions of the SBFTM were constructed: an initial-condition model and a modern transient model. The initial-condition model is a long-term transient model that simulates flow and solute-transport conditions during a period with limited anthropogenic influences preceeding the modern transient model. The simulation-transient model simulates flow and transport conditions from 1929 through 2013; however, because of data availability, the focus of the model calibration was 1972–2013. The SBFTM was calibrated to measured groundwater levels and drawdown, as well as measured chloride concentrations and change in concentrations, using a combination of automated and trial-and-error parameter-estimation techniques. A sensitivity analysis indicated that, in general, the SBFTM was most sensitive to recharge- and pumping-distribution parameters, specifically those controlling the amount of small-catchment recharge and the distribution of water extraction by hydrogeologic layer for production wells. The model was also sensitive to parameters controlling stream-recharge rates, horizontal and vertical hydraulic conductivity, and porosity. From 1929 to 1971, most of the water entering the area represented by the SBFTM was from creek and small-catchment recharge, and the majority of water leaving the SBFTM area was from pumping, discharge to creeks, and drains. In addition, about 37 percent of the total pumpage came from a net reduction in groundwater storage. From 1972 to 2013, the amount of water entering and leaving the SBFTM was fairly similar as that from 1929 to 1971, except the reduction in pumpage added about 17,000 acre-ft of water to storage. During this later period, there were also times of storage loss. For example, during July 1990, a month when approximately 705 acre-ft of groundwater was pumped in the study area, the pumpage was much greater than all sources of recharge combined, and about 382 acre-ft of water was removed from groundwater storage. Simulated hydraulic heads replicated the observed data to an acceptable matching of the measured water-level, flow direction, and vertical gradients. Simulated hydrographs for selected wells were in good agreement with the measured data, with an average residual of -2.7 ft and a standard deviation of 14.5 ft, indicating that the simulated heads, on average, underestimated the observed water levels. An examination of the model fit indicated that most of the discrepancies were lower simulated heads at wells proximal to production well sites. The simulated chloride concentrations reasonably matched the rising limbs of the measured breakthrough curves in terms of timing and magnitude; however, the simulation overestimated the chloride concentrations on the falling limbs. The overestimation of low chloride concentrations was attributed to the model overestimating the advance of the chloride front during periods of heavy pumping and underestimating the retreat of the chloride front during periods of low pumping. These simulation errors would result in a conservative response by local water managers to seawater intrusion. The SBFTM was used to develop a collection of predictive simulations optimized to produce pumping schedules that maximize yield, subject to a set of constraints and competing objectives. The simulations were grouped as scenarios that differed in their time horizon, initial conditions for groundwater levels and chloride concentrations, as well as precipitation, which was incorporated into the model through simulated recharge. Overall, five scenarios were developed in a multi-objective framework to obtain optimal pumping rates for all of the wells managed by the city, while minimizing excessive drawdown and seawater intrusion. For the current study, complexities in the simulation model and the optimization formulation required additional considerations. Incorporating the solute-transport equations to simulate chloride transport added a highly nonlinear process that is solved iteratively in each time step of the groundwater-flow model. These nonlinearities, coupled with the highly refined grid in the current model, creates challenges for many traditional optimization methods. Therefore, an optimization method was needed that could address nonlinear relationships as well as a very large problem size. Lastly, the optimization problem was reformulated to include multiple objectives without requiring convergence to a single solution. This approach, guided by the city’s objectives, allowed the maximum extraction of information from the complex simulation. Borg, a multi-objective evolutionary algorithm, was chosen as the optimization algorithm for this study for several reasons: (1) it is very computationally efficient; (2) it can run in parallel; (3) it requires little user input; and (4) it can solve for multiple competing objectives. The first three points allow the algorithm to proceed toward the optimal solutions at the fastest possible rate. The fourth point is advantageous for large, complex optimization problems because it is difficult to formulate the optimization problem in a way that produces only one optimal solution. The problem formulation consisted of four competing objectives and a constraint set in accordance with the main concerns of the city. The objectives were maximizing total pumpage, minimizing seawater intrusion, minimizing total drawdown in production wells, and minimizing the maximum drawdown. The constraints were pump capacity, meeting drinking-water standards for chloride, maintaining a specified minimum flowrate to a groundwater treatment plant, and maintaining minimum water levels in pumping wells. The decision variables either were quarterly pumpage by well or total pumpage by basin. Five optimization scenarios were developed that allow the decision makers to evaluate a range of optimal solutions for a variety of water levels and chloride concentrations as well as potential future climatic conditions. Three scenarios (1, 2, and 5) were multi-objective optimization formulations that allowed for variations in management preferences and climatic conditions. The other two scenarios (3 and 4) were designed to examine the optimization results to answer specific questions. Scenario 1 described the best-case sustainable yield assuming a “full” basin (that is, high initial water levels) and typical climate conditions for 10 years. Scenario 2 also started with a “full” basin; however, this was followed by a 10-year drought. Scenario 3 determined if an “empty” basin (that is, low initial water levels) would recover to full conditions (1998 conditions) given climate assumptions and optimal pumping schedules from scenarios 1 and 2. Scenario 4 was designed to produce decision rules that can be used by water managers to help choose an optimal pumping schedule based on measured water-level or chloride data. Scenario 5 identified future pumping schedules based on short-term climate variations during a 2-year management horizon. The results from scenarios 1 and 2 described the differences in maximum pumpage in the basin under typical and dry long-term climate projections, respectively. The scenario 1 results indicated the maximum 10-year pumpage of the basin was about 31,300 acre-ft under typical conditions and controlling simulated seawater intrusion and drawdowns. For scenario 2, less recharge over the 10-year dry climate produced a maximum pumpage estimate of 30,000 acre-ft to control seawater intrusion and drawdowns. The larger pumpage for scenario 1 resulted in more seawater intrusion, but less total drawdown, compared to that of scenario 2. Results for scenarios 3 and 4 showed the basin’s response to management actions combined with climate projections. Both scenarios used the optimal pumping schedules and the 10-year climates from scenarios 1 and 2. The scenario 3 results showed that under minimal pumping, the basin did not fully recover to 1998 water levels within 10 years under either climate scenario. The relatively larger recharge from the typical climate resulted in less drawdown at coastal monitoring wells after the 10-year recovery period than that from the dry climate. The location of the seawater intrusion front was not appreciably different between the scenarios, however. Scenario 4 used the optimal results from scenarios 1 and 2 to produce decision-rule curves that illustrated the pumpage for each basin, given measured levels of chloride concentration or drawdown. This allowed the use of additional measurements at monitoring wells to assess future management decisions on the basis of the sensitivity of observations of drawdown and seawater intrusion to various pumping rates. Scenario 5 allowed managers to investigate the effects of short-term climate variations on optimal pumping schedules. Three specific 2-year simulations were optimized: typical-to-dry (scenario 5A), dry-to-typical (scenario 5B), and dry-to-dry (scenario 5C). The most noteable result from scenario 5 was the overall reduction in optimal pumpage for most schedules in scenario 5C, when the climate is simulated as dry-to-dry. There are also many optimal pumping schedules that produced an overall increase in waterlevels over the two-year simulation period, regardless of climatic condition. Similar to scenario 2, the scenario 5C results represents conservative yield estimates under a minimal-precipitation climatic condition.

California↗

USGS2018

Rio Grande transboundary integrated hydrologic model and water-availability analysis, New Mexico and Texas, United States, and Northern Chihuahua, Mexico

Errata **September 28, 2018: The purpose of a USGS Open-file report (OFR) is dissemination of information that must be released immediately to fill a public need or information that is not sufficiently refined to warrant publication in one of the other USGS series. As part of that refinement process, an error was discovered in one of the input data sets of the Rio Grande Transboundary Integrated Hydrologic Model (RGTIHM) that this OFR was based upon. The error involved the assignment of storage properties to “phantom cells.” Phantom cells are required for most variants of MODFLOW that use a structured finite-difference grid when individual stratigraphic layers are represented as separate layers. Using phantom cells is a common practice that allows separate model layers to be maintained without having to combine stratigraphic layers into equivalent model layers or to use an unstructured grid. Typically, phantom cell horizontal hydraulic conductivities and storage properties are set to a small number and vertical hydraulic conductivities are set to a number large enough to allow vertical flow between the vertically adjacent layers. In the RGTIHM, the specific storage properties of the phantom cells for the upper (RGTIHM layers 3 and 4), middle (RGTIHM layers 5 and 6), and lower (RGTIHM layers 7 and 8) members of the Santa Fe Group were inadvertently assigned a value of 1 feet -1 . The revision of these specific storage values to a small number (1.0 x 10 -09 feet -1 ) required additional trial-and-error model calibration and a new sensitivity analysis. After calibration, the overall model fit remained similar to the fit described in the OFR, but the fit for many individual features such as project water available for diversions at the American Canal and Acequia Madre improved due to the reduction in flow coming from lower layers. Overall, there is still an average net depletion of groundwater flow, and the conclusions of the report are not changed. The revised average annual groundwater flow depletion simulated for the period 1953-2014 is -1,480 acre-feet/year for the entire model region, and -3,660 acre-feet/year for the portion of the model in the United States. The final version of the model will be the basis of the USGS Scientific Investigations Report that will supersede this OFR. An updated Model Archive of RGTIHM is available upon request to the USGS California Water Science Center. The corrected version of the model WAS the basis for the USGS Scientific Investigations Report that SUPERSEDED this Open-File Report.** Abstract Changes in population, agricultural development and practices (including shifts to more water-intensive crops), and climate variability are increasing demands on available water resources, particularly groundwater, in one of the most productive agricultural regions in the Southwest—the Rincon and Mesilla Valley parts of Rio Grande Valley, Doña Ana and Sierra Counties, New Mexico, and El Paso County, Texas. The goal of this study was to produce an integrated hydrological simulation model to help evaluate water-management strategies, including conjunctive use of surface water and groundwater for historical conditions, and to support long-term planning for the Rio Grande Project. This report describes model construction and applications by the U.S. Geological Survey, working in cooperation and collaboration with the Bureau of Reclamation. This model, the Rio Grande Transboundary Integrated Hydrologic Model, simulates the most important natural and human components of the hydrologic system, including selected components related to variations in climate, thereby providing a reliable assessment of surface-water and groundwater conditions and processes that can inform water users and help improve planning for future conditions and sustained operations of the Rio Grande Project (RGP) by the Bureau of Reclamation. Model development included a revision of the conceptual model of the flow system, construction of a Transboundary Rio Grande Watershed Model (TRGWM) water-balance model using the Basin Characterization Model (BCM), and construction of an integrated hydrologic flow model with MODFLOW-One-Water Hydrologic Flow Model (referred to as One Water). The hydrologic models were developed for and calibrated to historical conditions of water and land use, and parameters were adjusted so that simulated values closely matched available measurements (calibration). The calibrated model was then used to assess the use and movement of water in the Rincon Valley, Mesilla Basin, and northern part of the Conejos-Médanos Basin, with the entire region referred to as the “Transboundary Rio Grande” or TRG. These tools provide a means to understand hydrologic system response to the evolution of water use in the region, its availability, and potential operational constraints of the RGP. The conceptual model identified surface-water and groundwater inflows and outflows that included the movement and use of water both in natural and in anthropogenic systems. The groundwater-flow system is characterized by a layered geologic sedimentary sequence combined with the effects of groundwater pumping, operation of the RGP, natural runoff and recharge, and the application of irrigation water at the land surface that is captured and reused in an extensive network of canals and drains as part of the conjunctive use of water in the region. Historical groundwater-level fluctuations followed a cyclic pattern that were aligned with climate cycles, which collectively resulted in alternating periods of wet or dry years. Periods of drought that persisted for one or more years are associated with low surface-water availability that resulted in higher rates of groundwater-level decline. Rates of groundwater-level decline also increased during periods of agricultural intensification, which necessitated increasing use of groundwater as a source of irrigation water. Agriculture in the area was initially dominated by alfalfa and cotton, but since 1970 more water-intensive pecan orchards and vegetable production have become more common. Groundwater levels substantially declined in subregions where drier climate combined with increased demand, resulting in periods of reduced streamflows. Most of the groundwater was recharged in the Rio Grande Valley floor, and most of the pumpage and aquifer storage depletion was in Mesilla Basin agricultural subregions. A cyclic imbalance between inflows and outflows resulted in the modeled cyclic depletion (groundwater withdrawals in excess of natural recharge) of the groundwater basin during the 75-year simulation period of 1940–2014. Changes in groundwater storage can vary considerably from year to year, depending on land use, pumpage, and climate conditions. Climatic drivers of wet and dry years can greatly affect all inflows, outflows, and water use. Although streamflow and, to a minor extent, precipitation during inter-decadal wet-year periods replenished the groundwater historically, contemporary water use and storage depletion could have reduced the effects of these major recharge events. The average net groundwater flow-rate deficit for 1953–2014 was estimated to be about 8,990 acre-feet per year.

New Mexico, Northern Chihuahua, Texas↗

USGS2017

Stochastic programming with a joint chance constraint model for reservoir refill operation considering flood risk

Reservoir refill operation modeling attempts to maximize a set of benefits while minimizing risks. The benefits and risks can be in opposition to each other, such as having enough water for hydropower generation while leaving enough room for flood protection. In addition to multiple objects, the uncertainty of streamflow can make decision making difficult. This paper develops a stochastic optimization model for reservoir refill operation with the objective of maximizing the expected synthesized energy production for a cascade system of hydropower stations while considering flood risk. Streamflow uncertainty is addressed by discretized streamflow scenarios and flood risk is controlled by a joint chance constraint restricting the occurrence probability. With the variability of flood risk level, two advancing refill scenarios for exploring operation benefit are presented. Scenario I loosens the current stagewise storage bounds conditions and allows advancing reservoir refills but keeps the flood risk level the same as the refill policies obtained under the current storage bounds. Scenario II keeps the current storage bounds unchanged but allows increases in flood risk level. The proposed methodology is applied to the Xiluodu cascade system of reservoirs in China and investigates the optimal refill policies obtained by both scenarios. Compared with the benchmark obtained under the current storage bounds and lowest flood risk level, the results show (1) the synthesized energy production can be improved by 2.13% without changing the flood risk level under Scenario I, and (2) the synthesized energy production can also be increased by 0.21% at the expense of increasing the flood risk level by 4.4% when Scenario II is employed. As Scenario I produces higher benefit and lower risk than Scenario II, it is recommended to loosen the current stagewise storage bounds but to keep the flood risk level unchanged during refill operations.

Xiluodu Cascade Reservoir↗

USGS2015

Examples of deformation-dependent flow simulations of conjunctive use with MF-OWHM

The dependency of surface- and groundwater flows and aquifer hydraulic properties on deformation induced by changes in aquifer head is not accounted for in the standard version of MODFLOW. A new USGS integrated hydrologic model, MODFLOW-OWHM, incorporates this dependency by linking subsidence and mesh deformation with changes in aquifer transmissivity and storage coefficient, and with flows that also depend on aquifer characteristics and land-surface geometry. This new deformation-dependent approach is being used for the further development of the integrated Central Valley hydrologic model (CVHM) in California. Preliminary results from this application and from hypothetical test cases of similar systems show that changes in canal flows, stream seepage, and evapotranspiration from groundwater (ET gw ) are sensitive to deformation. Deformation feedback has been shown to also have an indirect effect on conjunctive surface- and groundwater use components with increased stream seepage and streamflows influencing surface-water deliveries and return flows. In the Central Valley model, land subsidence may significantly degrade the ability of the major canals to deliver surface water from the Delta to the San Joaquin and Tulare basins. Subsidence can also affect irrigation demand and ET gw , which, along with altered surface-water supplies, causes a feedback response resulting in changed estimates of groundwater pumping for irrigation. This modeling feature also may improve the impact assessment of dewatering-induced land subsidence/uplift (following irrigation pumping or coal-seam gas extraction) on surface receptors, inter-basin transfers, and surface infrastructure integrity.

Proceedings of the International Association of Hy↗

USGS2015

An integrated approach to conjunctive-use analysis with the one-water hydrologic flow model, MODFLOW-OWHM

The MODFLOW-2005 (MF) family of hydrologic simulators has diverged into multiple versions designed for specific needs, thus limiting their use to their respective designs. The One-Water Hydrologic Flow Model (MF-OWHM v1.0) is an integrated hydrologic flow model that is an enhanced fusion of multiple MF versions. While maintaining compatibility with existing MF versions, MF-OWHM includes: linkages for coupled heads, flows, and deformation; facilitation of self-updating models, additional observation and parameter options for higher-order calibrations; and redesigned code for faster simulations. This first release of MF-OWHM incorporates MODFLOW-2005 and the Farm Process (MF-FMP2), with new features (FMP3), combined with Local Grid Refinement (MF-LGR), Streamflow Routing (SFR), Surfacewater Routing Process (SWR), Seawater Intrusion (SWI), Riparian Evapotranspiration (RIP-ET), the Newton Formulation (MF-NWT), and more. MF-OWHM represents a complete integrated hydrologic model that fully links the movement and use of groundwater, surface water, and imported water for consumption by agriculture and natural vegetation on the landscape, and for potable and other uses. By retaining and keeping track of the water during simulation of the hydrosphere, MF-OWHM accounts for “all of the water everywhere and all of the time.” This provides the foundation needed to address integrated hydrologic problems such as evaluation of conjunctive-use alternatives and sustainability analysis, including potential adaptation and mitigation strategies, and best management practices.

Conference Paper↗

USGS2014

One-Water Hydrologic Flow Model (MODFLOW-OWHM)

The One-Water Hydrologic Flow Model (MF-OWHM) is a MODFLOW-based integrated hydrologic flow model (IHM) that is the most complete version, to date, of the MODFLOW family of hydrologic simulators needed for the analysis of a broad range of conjunctive-use issues. Conjunctive use is the combined use of groundwater and surface water. MF-OWHM allows the simulation, analysis, and management of nearly all components of human and natural water movement and use in a physically-based supply-and-demand framework. MF-OWHM is based on the Farm Process for MODFLOW-2005 (MF-FMP2) combined with Local Grid Refinement (LGR) for embedded models to allow use of the Farm Process (FMP) and Streamflow Routing (SFR) within embedded grids. MF-OWHM also includes new features such as the Surface-water Routing Process (SWR), Seawater Intrusion (SWI), and Riparian Evapotrasnpiration (RIP-ET), and new solvers such as Newton-Raphson (NWT) and nonlinear preconditioned conjugate gradient (PCGN). This IHM also includes new connectivities to expand the linkages for deformation-, flow-, and head-dependent flows. Deformation-dependent flows are simulated through the optional linkage to simulated land subsidence with a vertically deforming mesh. Flow-dependent flows now include linkages between the new SWR with SFR and FMP, as well as connectivity with embedded models for SFR and FMP through LGR. Head-dependent flows now include a modified Hydrologic Flow Barrier Package (HFB) that allows optional transient HFB capabilities, and the flow between any two layers that are adjacent along a depositional or erosional boundary or displaced along a fault. MF-OWHM represents a complete operational hydrologic model that fully links the movement and use of groundwater, surface water, and imported water for consumption by irrigated agriculture, but also of water used in urban areas and by natural vegetation. Supply and demand components of water use are analyzed under demand-driven and supply-constrained conditions. From large- to small-scale settings, MF-OWHM has the unique set of capabilities to simulate and analyze historical, present, and future conjunctive-use conditions. MF-OWHM is especially useful for the analysis of agricultural water use where few data are available for pumpage, land use, or agricultural information. The features presented in this IHM include additional linkages with SFR, SWR, Drain-Return (DRT), Multi-Node Wells (MNW1 and MNW2), and Unsaturated-Zone Flow (UZF). Thus, MF-OWHM helps to reduce the loss of water during simulation of the hydrosphere and helps to account for “all of the water everywhere and all of the time.” In addition to groundwater, surface-water, and landscape budgets, MF-OWHM provides more options for observations of land subsidence, hydraulic properties, and evapotranspiration (ET) than previous models. Detailed landscape budgets combined with output of estimates of actual evapotranspiration facilitates linkage to remotely sensed observations as input or as additional observations for parameter estimation or water-use analysis. The features of FMP have been extended to allow for temporally variable water-accounting units (farms) that can be linked to land-use models and the specification of both surface-water and groundwater allotments to facilitate sustainability analysis and connectivity to the Groundwater Management Process (GWM). An example model described in this report demonstrates the application of MF-OWHM with the addition of land subsidence and a vertically deforming mesh, delayed recharge through an unsaturated zone, rejected infiltration in a riparian area, changes in demand caused by deficiency in supply, and changes in multi-aquifer pumpage caused by constraints imposed through the Farm Process and the MNW2 Package, and changes in surface water such as runoff, streamflow, and canal flows through SFR and SWR linkages.

Techniques and Methods↗