Geology topics

Ryan J. McAleer

Publications and source records attributed to Ryan J. McAleer.

At least 37 records · Page 2Linked to original sources

USGS2024

Ion exchange processes for CO2 mineralization using industrial waste streams: Pilot plant demonstration and life cycle assessment

An attractive technique for removing CO 2 from the environment is sequestration within stable carbonate solids (e. g., calcite). However, continuous addition of alkalinity is required to achieve favorable conditions for carbonate precipitation (pH>8) from aqueous streams containing dissolved CO 2 (pH<4.5) and Ca 2+ ions. In this study, a pH-swing process using ion exchange was demonstrated to process 300 L of produced water brine per day for CO 2 mineralization. Proton titration capacities were quantified for aqueous streams in equilibrium with gas streams at various concentrations of CO 2 (pCO 2 =0.03–0.20 atm) and at various flow rates (0.5–2.0 L min −1 ). Energy intensities for the process were determined to be between 30 and 65 kWh per tonne of CO 2 sequestered depending on the composition of the brine stream. A life cycle assessment was performed to analyze the net carbon emissions of the technology which indicated a net CO 2 reduction for pCO 2 ≥0.12 atm (−0.06–−0.39 kg CO 2 e per kg precipitated CaCO 3 ) utilizing calcium-rich brines. The results from this study indicate the ion exchange process can be used as a scalable method to provide alkalinity necessary for the capture and storage of CO 2 in Ca-rich waste streams.

Chemistry Select↗

USGS2024

Insights into glendonite formation from the upper Oligocene Sagavanirktok Formation, North Slope, Alaska

The type locality for the upper Oligocene Nuwok Member of the Sagavanirktok Formation (Carter Creek, North Slope, Alaska, USA) contains abundant occurrence of glendonite, a pseudomorph after the calcium carbonate mineral ikaite, which typically forms in the shallow subsurface of cold marine sediments. The region during the time of Nuwok Member deposition was located at a high latitude, similar to today, and the study site is characterized by sands and silty muds interpreted here to have been deposited in coastal and shelfal marine environments. Isotopic (Sr) and biostratigraphic (foraminifera) evidence presented here refine the depositional age of the outcrop to approximately 24 Ma. Glendonites occur in two basic forms: radial clusters, commonly centered around a single larger primary crystal ( approx. 10 cm; Type A) and larger single blades generally without accessory crystals (approx. 15–25 cm; Type B). Microscopic examination revealed a sequence of multiple types of replacive calcite that formed as a direct result of ikaite transformation: Type 1 rhombohedral crystals characterized by microporous and inclusion-rich cores and concentric zones, Type 2A, composed of clear calcite that overgrew and augmented Type 1 crystals, and inclusion-rich, microcrystalline Type 2B, which formed a matrix surrounding the rhombs and commonly dominates the outer rims of glendonite specimens. Type 3 calcite precipitated as fibrous, botryoidal epitaxial cement atop previous phases and is not ikaite-derived. These phases are distributed in similar ways in all examined specimens and are consistent with several previously described glendonite occurrences around the world, despite differing diagenetic and geologic histories. Stable isotope evidence (δ13C and δ18O) suggests sourcing of glendonite carbon from both organic and methanogenic sources. Glendonites of the Nuwok Member can therefore assist in the determination of a more comprehensive ikaite transformation model, improving our understanding of glendonite formation and the sedimentological and environmental context of their occurrence. Oligocene glendonites are uncommon globally; the well-preserved occurrence described here can allow future studies to better reconstruct Arctic environmental conditions and paleoclimates during this time.

Alaska↗

USGS2024

Cathodoluminescence differentiates sedimentary organic matter types

High-resolution scanning electron microscopy (SEM) visualization of sedimentary organic matter is widely utilized in the geosciences for evaluating microscale rock properties relevant to depositional environment, diagenesis, and the processes of fluid generation, transport, and storage. However, despite thousands of studies which have incorporated SEM methods, the inability of SEM to differentiate sedimentary organic matter types has hampered the pace of scientific advancement. In this study, we show that SEM-cathodoluminescence (CL) properties can be used to identify and characterize sedimentary organic matter at low thermal maturity conditions. Eleven varied mudstone samples with a broad array of sedimentary organic matter types, ranging from the Paleoproterozoic to Eocene in age, were investigated. Sedimentary organic matter fluorescence intensity and CL intensity showed an almost one-to-one correspondence, with certain exceptions in three samples potentially related to radiolytic alteration. Therefore, because CL emission can be used as a proxy for fluorescence emission from sedimentary organic matter, CL emission during SEM visualization can be used to differentiate fluorescent from non-fluorescent sedimentary organic matter. This result will allow CL to be used as a visual means to quickly differentiate sedimentary organic matter types without employing correlative optical microscopy and could be widely and rapidly adapted for SEM-based studies in the geosciences.

Scientific Reports↗

USGS2024

Deformation-induced graphitization and muscovite recrystallization in a ductile fault zone

A suite of slate samples collected along a 2 km transect crossing the Lishan fault in central Taiwan were evaluated to assess the role of ductile deformation in natural graphitization at lower greenschist facies metamorphic conditions. The process of natural aromatization, or graphitization, of an organic precursor is well established as a thermally driven process; however, experimental studies have shown that the energy provided by deformation can substantially reduce the activation energy required for graphitization. This study provides a natural example of deformation-induced graphitization. A strain gradient approaching the Lishan fault was established by scanning electron microscope imaging and X-ray diffraction analysis of phyllosilicates and quartz that showed an increase in the strength of slaty cleavage development via dissolution-precipitation processes. Thermal conditions were constrained to be near isothermal using calcite-dolomite geothermometry. Raman spectroscopic results from carbonaceous material, including D1-full width-at-half-maximum (FWHM), G-FWHM, Raman band separation (RBS), and a lesser-known vibrational mode B 2g -FWHM, showed robust linear trends across the same sampling transect. However, the G-FWHM parameter showed a trend opposite of that expected from thermally driven graphitization. The Raman results are interpreted to reflect a strain-driven reduction in graphite crystallite size (decrease in G-FWHM) but improvement in structural ordering in individual coherent domains. A multiple linear regression with an R 2 value of 0.92 predicts the graphite D1-FWHM values from the XRD-derived ratio of muscovite populations and muscovite microstrain, demonstrating the concomitant recrystallization of silicates and carbonaceous material across the strain gradient, despite the disparate processes accommodating the deformation. This study demonstrates the role of deformation in natural graphitization and provides a new perspective on the use of graphite as a geothermometer in strongly deformed greenschist facies rocks.

Journal of Metamorphic Geology↗

USGS2024

Evaluation of coal mine drainage and associated precipitates for radium and rare earth element concentrations

Coal mine drainage (CMD) and associated metal-rich precipitates have recently been proposed as unconventional sources of rare earth elements (REEs). However, the potential occurrence of radium (Ra), a known carcinogen, with the REE-bearing phases has not been investigated. We hypothesized that Ra may occur in solids that are precipitated from CMD as a “radiobarite” solid solution ((Ba,Sr,Ra)SO 4 ) and/or adsorbed with hydrous metal oxides. REEs have been documented to sorb or co-precipitate with iron (Fe), manganese (Mn), and aluminum (Al) oxyhydroxide in CMD solids. Likewise, Ra has been documented to sorb to hydrous Fe and Mn oxides especially where sulfate (SO 4 ) and/or barium (Ba) concentrations are insufficient to precipitate radiobarite. Thus, we conducted the first-ever survey of Ra concentrations in corresponding CMD water and solid samples in the United States. Samples were analyzed from 4 untreated and 9 treated CMD sites in both the bituminous and anthracite coal regions of Pennsylvania across a range of pH and SO 4 concentrations. The dissolved Ra in CMD was relatively low (<0.5 Bq/L), consistent with radiobarite solubility; however, CMD solids were largely composed of amorphous Fe, Al, and Mn oxyhydroxide and silicate minerals. Ra was associated with Mn-enriched CMD solids, upwards of 875 Bq/kg. Total REE + yttrium (Y) content in the CMD solids was enriched upwards of 3600 mg/kg and was significantly correlated with Al content. These preliminary results suggest that REE extraction may target Al-rich solids to avoid Ra in Mn-rich solids.

Pennsylvania↗

USGS2024

Ore mineralization in the Mofete and San Vito geothermal fields, Campi Flegrei volcanic complex, Naples, Italy

The Mofete and San Vito geothermal fields, located west of Naples, Italy, are part of the Campi Flegrei volcanic complex. In the 1970s, exploratory wells were drilled to a depth of ~3000 m in an attempt to locate high-enthalpy fluids for potential power production. Drill core samples from Mofete wells (MF1, MF2, and MF5) and from San Vito wells (SV1 and SV3) contain authigenic ore mineralization. Pyrite, pyrrhotite, and galena are abundant. Less common are chalcopyrite, sphalerite, arsenopyrite, and scheelite; rare are millerite, violarite, native bismuth, tellurobismuthite, cassiterite, molybdenite, and acanthite. Mineral chemistry was determined by electron microprobe wavelength dispersive spectroscopy aided by a scanning electron microscope equipped with energy-dispersive spectroscopy. The mineral assemblage suggests a low sulfidation environment and the absence of pyrrhotite in the MF1 well and upper part of the SV1 well indicates variable sulfur activity. Both molybdenite and scheelite were identified in samples SV1–2860 and SV3–2353 and scheelite in the SV3 well is zoned with variable Mo 6+ content; low Mo 6+ zones show blue cathodoluminescence, whereas, zones with high Mo 6+ content are yellow to brown. Zoned scheelite and the occurrence of both Mo-bearing minerals attest to the variability of ƒO 2 and ƒS 2 in the geothermal fluid.

Naples↗

USGS2024

Mesoproterozoic to Paleozoic tectonics, Pleistocene landforms, and Holocene seismicity in the Blue Ridge: Results from integrated studies of the 9 August 2020, Mw 5.1 earthquake area near Sparta, North Carolina, USA

This field trip examines the results of integrated geologic studies of the 9 August 2020, M w 5.1 earthquake near Sparta, North Carolina, USA. The earthquake generated ~4 km of coseismic surface rupture of the Little River fault and uplifted a surface area of ~11 km 2 . The Little River fault is a thrust fault oriented 110–130°/45–70°SW, and mapped fault segments are en echelon with scarp heights from <5–30 cm. The epicenter is in polydeformed rocks of the Ashe and Alligator Back Metamorphic Suites in the eastern Blue Ridge. Bedrock structure formed during multiple Paleozoic orogenies; the regional foliation strikes NE-SW and dips SE (mean orientation 063°/52°SE). Mapping identified late Paleozoic veins and shear zones, a regional joint set striking 330–340° and 250–240°, and brittle faults that cut the Paleozoic foliation. Brittle faults oriented similar to the Little River fault are mapped up to 4 km along strike from the coseismic rupture along Bledsoe Creek valley, and the combined length of the Little River fault system is ~8 km. Paleoseismic trenches across the Little River fault corroborate the reactivation of an older fault by the 2020 earthquake and reveal two events during late Pleistocene (<50 ka). Surficial mapping identified several terrace deposits, including a deposit along Bledsoe Creek that yielded a 26 Al/ 10 Be isochron burial age of 0.46 ± 0.13 Ma and overlies a brittle fault, thus constraining the timing of movement of the fault at that location. Paleoliquefaction studies document soft-sediment deformation features in alluvium that may represent paleoseismic events. Collectively, these results highlight long-lived paleoseismicity of the Blue Ridge and that the 9 August 2020 earthquake reactivated an older, suitably oriented brittle fault in the bedrock. The Little River fault is an example of a previously unknown but active fault lying outside of known seismic zones with demonstrated recurrence of paleo-ruptures, raising questions about the assumption that damaging earthquakes are limited to areas of ongoing background seismicity, which is counter to seismic hazard assessments in the eastern United States. Bedrock mapping separates eastern Blue Ridge lithostratigraphy of the Lynchburg Group and Ashe and Alligator Back Metamorphic Suites into separate fault-bound packages juxtaposed over various 1.3–1.0 Ga basement rocks of the northern French Broad massif by the Gossan Lead fault.

North Carolina↗

USGS2023

Extrusion tectonism of Indochina reassessed: constraints from 40Ar/39Ar geochronology from the Day Nui Con Voi metamorphic massif, Vietnam

The extrusion tectonic model for the southeastern margin of the Himalayan orogeny links the crustal shear activity along the Red River Shear Zone (RRSZ) to the opening of the South China Sea (SCS). The Day Nui Con Voi (DNCV) metamorphic massif in northern Vietnam strikes NW-SE, is bounded by the RRSZ to the south and continues along the strike where it meets the SCS. The DNCV is thus a critical area to document thermotectonic history in order to advance our understanding of the tectonic evolution of Indochina extrusion and its relationship to the opening of the SCS. Our new 40 Ar/ 39 Ar data combined with microstructural and petrological analyses constrained the timing of the left-lateral shearing of the RRSZ and revealed the thermal evolution of the DNCV metamorphic massif. Three ductile deformation events were observed. D 1 formed NNW-SSE striking upright folds under granulite to upper amphibolite facies conditions. D 2 was a horizontal to sub-horizontal folding event that occurred at amphibolite facies conditions. D 3 was a doming event that formed NW-SE striking up-right folds bounded by left-lateral shearing mylonite belts along the two limbs. The S/C fabrics were defined by muscovite fish, quartz + albite + K-feldspar aggregates, and muscovite folia. The D 3 doming event exhumed the DNCV metamorphic massif from amphibolite facies conditions to the lower greenschist facies conditions. The 40 Ar/ 39 Ar ages obtained from amphibole (∼26 Ma), phlogopite (∼25 Ma), muscovites (∼24-23 Ma), biotite (∼25-23 Ma), and K-feldspars (∼25-22 Ma) from different structural domains of the DNCV metamorphic massif indicated a rapid exhumation ∼26–22 Ma. We interpreted this as the time period for the D 3 event, with the onset of left-lateral shearing occurring around 24 Ma based on ages obtained from syn-kinematic muscovites. This age was much younger than the initiation of sea-floor spreading of the SCS (since 32 Ma) but coincided with the age for the ridge jump event in the SCS. Based on these new data, we proposed that extrusion tectonism cannot be the cause for the initial opening of the SCS. Rather, the extrusion of the Indochina block was temporally correlative with the southward ridge jump event of the already opened SCS.

Day Nui Con Voi massif↗

USGS2023

Redefinition of the Petersburg batholith and implications for crustal inheritance in the Dinwiddie terrane, Virginia, USA

Field relations as well as geochemical and petrologic studies of metaigneous rocks assigned to the Pennsylvanian–Permian Petersburg batholith identify at least two distinct rock types: foliated metagranitoid gneiss and massive to porphyritic granite. Foliated metagranitoid gneiss of mostly granodioritic composition is geochemically distinct from associated massive and porphyritic granitic rocks. These gneissic rocks yield radiometric ages from ca. 425 Ma to ca. 403 Ma and document that many of the rocks assigned to the late Paleozoic Petersburg batholith are 100 m.y. older than the youngest portions of the composite batholith and are part of an earlier infrastructural terrane. Two samples of massive equigranular granite southwest of Petersburg, Virginia, yield ages of ca. 321 Ma and ca. 317 Ma, which are 15–20 m.y. older than ca. 300 Ma ages for porphyritic granite, massive granite, and monzodiorite near Richmond, Virginia. Geologic mapping shows that the Early Pennsylvanian granite southwest of Petersburg is separated from Late Pennsylvanian to early Permian granite near Richmond by a map-scale septum of Silurian–Devonian foliated metagranitoid gneiss, referred to herein as the informal Pocoshock Creek gneiss. Laser ablation–inductively coupled plasma–mass spectrometry data from one sample of a quartz-muscovite felsic schist xenolith show a peak age mode of ca. 529 Ma that we interpret to be the maximum depositional age. Inherited zircons from foliated metagranitoid gneiss and massive equigranular granite range from ca. 631 Ma to ca. 376 Ma, but many are Cambrian. Neoproterozoic–Cambrian quartz-muscovite felsic schist and amphibolite, Silurian–Devonian Pocoshock Creek gneiss, and Pennsylvanian–Permian granite comprise a fault-bounded terrane referred to herein as the Dinwiddie terrane. Ages of inherited cores in zircon from igneous rocks and limited detrital zircon geochronology suggest the terrane is of peri-Gondwanan affinity. U/Pb ages of healed fractures in zircon grains from foliated metagranitoid gneiss indicate low-grade deformation of the gneiss at ca. 378–376 Ma, while ca. 320–280 Ma rims on many grains record intrusion of late Paleozoic granite. The temperature-time-deformation history of the Dinwiddie terrane is distinct from the adjacent Goochland and Roanoke Rapids terranes. Orogen-scale dextral transpression likely translated the Dinwiddie terrane southward during the Alleghanian orogeny, at which time they were intruded by Pennsylvanian to Permian granite.

Virginia↗

USGS2023

A novel non-destructive workflow for examining germanium and co-substituents in ZnS

A suite of complementary techniques was used to examine germanium (Ge), a byproduct critical element, and co-substituent trace elements in ZnS and mine wastes from four mineral districts where germanium is, or has been, produced within the United States. This contribution establishes a comprehensive workflow for characterizing Ge and other trace elements, which captures the full heterogeneity of samples through extensive pre-characterization. This process proceeded from optical microscopy, to scanning electron microscopy and cathodoluminescence (CL) imaging, to electron microprobe analysis, prior to synchrotron-based investigations. Utilizing non-destructive techniques enabled reanalysis, which proved essential for verifying observations and validating unexpected results. In cases where the Fe content was <0.3 wt% in ZnS, cathodoluminescence imaging proved to be an efficient means to qualitatively identify trace element zonation that could then be further explored by other micro-focused techniques. Micro-focused X-ray diffraction was used to map the distribution of the non-cubic ZnS polymorph, whereas micro-focused X-ray fluorescence (μ-XRF) phase mapping distinguished between Ge 4+ hosted in primary ZnS and a weathering product, hemimorphite [Zn 4 Si 2 O 7 (OH) 2 ·H 2 O]. Microprobe data and μ-XRF maps identified spatial relationships among trace elements in ZnS and implied substitutional mechanisms, which were further explored using Ge and copper (Cu) X-ray absorption near-edge spectroscopy (XANES). Both oxidation states of Ge (4+ and 2+) were identified in ZnS along with, almost exclusively, monovalent Cu. However, the relative abundance of Ge oxidation states varied among mineral districts and, sometimes, within samples. Further, bulk XANES measurements typically agreed with micro-focused XANES (μ-XANES) spectra, but unique micro-environments were detected, highlighting the importance of complementary bulk and micro-focused measurements. Some Ge μ-XANES utilized a high energy resolution fluorescence detector, which improved spectral resolution and spectral signal-to-noise ratio. This detector opens new opportunities for exploring byproduct critical elements in complex matrices. Overall, the non-destructive workflow employed here can be extended to other byproduct critical elements to more fully understand fundamental ore enrichment processes, which have practical implications for critical element exploration, resource quantification, and extraction.

Frontiers in Earth Science↗

USGS2023

Mapping ancient sedimentary organic matter molecular structure at nanoscales using optical photothermal infrared spectroscopy

Elucidating the molecular structure of sedimentary organic matter (SOM) is key to understanding petroleum generation processes, as well as ancient sedimentary environments. SOM structure is primarily controlled by biogenic source material (e.g., marine vs. terrigenous), depositional conditions, and subsurface thermal history. Additional factors, e.g., strain, may also impact the molecular structure of SOM. Multiple spatially resolved approaches exist for in situ evaluation of SOM, including Raman and infrared spectroscopies, as well as mass spectrometric methods. While these methods have enabled increased understanding of the occurrence and distribution of SOM functional groups, they suffer from disadvantages including low spatial resolution (infrared spectroscopy), limited molecular information (Raman spectroscopy), and sample destruction (mass spectrometric methods). Recent technological advances have resulted in infrared spectrometers capable of breaking the Abbe diffraction limit, greatly increasing the spatial resolutions accessible for an infrared measurement. Here we utilize optical photothermal infrared spectroscopy (O-PTIR) to record maps of functional group distributions at 500 nm spatial resolution in Tasmanites (algal microfossils) from the Upper Devonian Ohio Shale. These data allow for discrimination between Tasmanites , adjacent SOM, and fine-grained minerals. Additionally, functional group distributions within Tasmanites were found to be generally homogenous, although slight variations exist between the body and fold apices (zones of greatest deformation) which may indicate strain-induced chemical reactions. The data presented here represent the first application of O-PTIR to study SOM, highlighting the promise of this analytical approach for future studies evaluating the molecular composition of geologic materials at sub-micron scales.

Organic Geochemistry↗

USGS2023

The Sukari gold deposit, Egypt: Geochemical and geochronological constraints on the ore genesis and implications for regional exploration

The Sukari gold deposit (>15 Moz Au) in the Eastern Desert of Egypt is hosted by a deformed granitoid stock (Sukari tonalite-trondhjemite intrusion) and mainly occurs as a network of crosscutting sulfide-bearing quartz (± carbonate) veins and intensely sulfidized-silicified-sericitized wall rock. Emplacement of the Sukari intrusion into a tectonized Neoproterozoic accretionary complex was controlled by a system of NE- to NNE-trending oblique faults that are related to a deep-seated positive flower structure. A robust genetic model has been hampered by the poorly understood relationships between gold mineralization and host rocks. In this study, zircon U-Pb ages of three samples from the Sukari intrusion define a crystallization age of ~695 ± 2 Ma. In contrast, hydrothermal sericite from the ore zone yields an 40 Ar/ 39 Ar age of ~625 ± 3 Ma, which coincides with the onset of major sinistral transpression in the region. Features including sigmoidal morphology of gold quartz veins and abundant subhorizontal tension gashes alongside widespread brecciation and recrystallization suggest that quartz veining occurred during renewed shortening and exhumation through the brittle-ductile transition. Petrographic and micro-X-ray fluorescence (µXRF) studies indicate that disseminated gold and sulfides, commonly associated with sericite and carbonate alteration, are mostly confined to stylolitic bands in the quartz veins. Oscillatory and sector zoning patterns, irregular As-rich bands, and truncations between early- and late-genetic pyrites reflect variations in temperature and mechanism of ore deposition, demonstrated by variable As/S and Co/Ni ratios in the different pyrite generations. Laser ablation-inductively coupled plasma-mass spectrometry analysis pinpoints the covariance of gold and arsenic contents in pyrite, but free milling gold inclusions in microfractures consistently have a mercury-bearing electrum composition, depicting different ore formation stages. Ore fluids with δ 34 S H 2 s "> S H 2 s values of –1.9 to –3.0‰, modeled from gold-associated pyrite and arsenopyrite assemblages with nearly identical δ 34 S values, suggest a likely single source of sulfur. Alternatively, multisourced sulfur could have extensively mixed and equilibrated by fluid reaction with carbonaceous wall rock. Gold deposition was triggered by abrupt changes in fluid pH and ƒ f O 2 "> O 2 ⁠ . As an implication for future exploration, sites of maximized strain gradients adjacent to granitoid bodies along extensive transpression zones in the district could be highly prospective targets, particularly where imprinted by sericite-carbonate ± graphite alteration.

Sukari gold deposit↗

USGS2023

Geology of the Mount Rogers area, revisited: Evidence of Neoproterozoic continental rifting, glaciation, and the opening and closing of the Iapetus Ocean, Blue Ridge, VA–NC–TN

Recent field and geochronological studies in eight 7.5-minute quadrangles near Mount Rogers in Virginia, North Carolina and Tennessee recognize (1) important stratigraphic and structural relationships for the Neoproterozoic Mount Rogers and Konnarock Formations, and the northeast end of the Mountain City window; (2) the separation of Mesoproterozoic rocks of the Blue Ridge into three age groups; and (3) the timing and emplacement of the Blue Ridge thrust sheet. The study area includes folded and faulted Paleozoic strata of the Valley and Ridge in the northwest juxtaposed by metamorphic and igneous rocks of the Blue Ridge to the southeast. In the Valley and Ridge, Cambrian to Middle Ordovician carbonate and clastic rocks are exposed in a syncline in the Pulaski thrust sheet; these rocks are overridden by the Blue Ridge thrust sheet. The northeast end of the Mountain City window is interpreted as a simple window; the Stone Mountain fault is folded and continues as the Iron Mountain fault on the NW-side of the window. The Stone Mountain fault does not exist at the surface to the NE near the Razor Ridge volcanic center. Instead, a continuous section of Proterozoic gneisses, Mount Rogers Formation, Konnarock Formation and Chilhowee Group is now recognized. Rhyolites of the Mount Rogers Formation range from 760–749Ma, with detrital zircon age populations from associated volcaniclastic rocks indicating magmatism and rifting began by ~780 Ma. Rhyolite outliers in the Konnarock Formation and a change from rift-related clastic rocks of the Mount Rogers Formation transitioning to maroon laminites, mudstones and laminites with dropstones, suggest that the Konnarock Formation may be as old as ~751 Ma. Mesoproterozoic crystalline rocks of the Blue Ridge, previously referred to as the Cranberry Gneiss, are distinguished based on field relationships and SHRIMP U–Pb zircon geochronology: (1) ~1.33 Ga pre-Grenvillian crust; (2) 1190–1140 Ma granitoids (early magmatic suite); and (3) 1075–1030 Ma granitoids (late magmatic suite). Multiple greenschist-facies high-strain zones, including the 2–11 km wide Fries high-strain zone, occur in the Blue Ridge thrust sheet. Fabrics across the Fries and Gossan Lead faults have similar orientations and NW–directed contractional deformation. 40 Ar/ 39 Ar hornblende, muscovite, and K-feldspar ages indicate the western and eastern Blue Ridge had different thermal histories. The eastern Blue Ridge (Gossan Lead thrust sheet) experienced a 360–340 Ma amphibolite facies event prior to juxtaposition with the western Blue Ridge. 40 Ar/ 39 Ar muscovite ages in western Blue Ridge rocks document greenschist facies metamorphism and deformation and emplacement of the Blue Ridge thrust sheet at ~340 Ma; the Catface and Fries faults are tentatively interpreted to be contemporaneous. After initial emplacement of the Blue Ridge thrust sheet at ~340 Ma, shortening was accommodated by westward translation along the basal decollement, which carried the Blue Ridge thrust sheet to its current position.

North Carolina, Tennessee, Virginia↗

USGS2022

Vein-type gold formation during late extensional collapse of the Eastern Desert, Egypt: the Gidami deposit

Orogenic gold deposits, though construed to focused fluid flow during orogenesis, commonly post-date the main accretionary events. Several lines of evidence indicate that orogenic gold formation in the Arabian–Nubian Shield continued through the orogen collapse stage and associated rapid exhumation and thermal re-equilibration. The Gidami gold deposit in the Eastern Desert of Egypt is associated with post-foliation, brittle-ductile shear zones that deformed a weakly foliated tonalite-trondhjemite massif dated as ~ 704 Ma (U–Pb zircon age). Gold-sulfide quartz veins exhibit textural features indicative of repeated mylonitization, recrystallization, and muscovite crystallization. New 40 Ar/ 39 Ar ages of muscovite flakes from the auriferous quartz veins and from the altered wallrock overlap within analytical uncertainty at ~ 583 Ma, which corresponds to the climax of extension-related wrenching and rapid exhumation in the region (~ 596 to 582 Ma). Laser ablation-inductively coupled plasma-mass spectrometry (LA-ICP-MS) data coupled with microtextural characteristics suggest that early formed pyrite generations experienced substantial fluid-mediated recrystallization, and that a set of metals was remobilized by later fluids. A late generation of fibrous pyrite, ubiquitous in microfractures, deposited while the veins re-opened and deformed. The occurrence of free gold particles along with a late-paragenetic assemblage of galena-sphalerite-chalcopyrite(± hessite ± cervelleite) was related to influx of low salinity, metalliferous H 2 O-NaCl-CO 2 -CH 4 fluids as indicated by the fluid inclusion laser Raman spectroscopy and microthermometry results. Au-mobilization and redeposition at T ≤ 350 °C and P ~ 1 to 1.7 kbar, triggered by intermittent fluid pluses and thermal re-equilibration, were most likely stimulated by extensional structures and within-plate magmatism. Coincident province- and deposit-scale pressure–temperature-time data highlight the pivotal role of the orogenic collapse tectonics in gold endowment in the Central Eastern Desert’s crust.

Gidami deposit↗

USGS2022

Bedrock geologic map of the Crown Point quadrangle, Essex County, New York, and Addison County, Vermont

The bedrock geology of the 7.5-minute Crown Point quadrangle consists of deformed and metamorphosed Mesoproterozoic gneisses of the Adirondack Highlands unconformably overlain by weakly deformed lower Paleozoic sedimentary rocks of the Champlain Valley. The Mesoproterozoic rocks occur on the eastern edge of the Adirondack Highlands and represent an extension of the Grenville Province of Laurentia. Granulite facies Mesoproterozoic paragneiss, marble, and amphibolite hosted the emplacement of granitic orthogneiss at approximately 1.18–1.15 giga-annum (Ga, billion years before present). The earliest of four phases of deformation (D1) is characterized by gneissosity, rarely preserved F1 isoclinal folds, and migmatite in the host rocks. Subsequent D2 deformation produced a composite penetrative gneissosity, migmatite, and isoclinal F2 folds. Towards the end of D2, felsic magmatism (including the regionally extensive Lyon Mountain Granite Gneiss, abbreviated “LMG”) spread by penetrative migration as semiconcordant alkali feldspar granite sheets subparallel to S2 into previously deformed lithologies. The LMG crystallized at approximately 1.15 Ga and displays synkinematic F2 folds thus constraining the time of D2 deformation. Exhumation during D3 produced F3 folds exhibited in regional domes and basins, such as the Keeney Mountain synform, local reactivation of the S2 foliation, partial melting, metamorphism, metasomatism, iron ore remobilization, and intrusion of magnetite-bearing pegmatite both as layer-parallel sills and crosscutting dikes. D4 created NE- and NW-trending boudinage, local high-grade ductile shear zones, and crosscutting granitic pegmatite dikes. Kilometer (km)-scale lineaments readily observed in lidar data are Ediacaran mafic dikes and Phanerozoic brittle faults. The Paleozoic rocks are part of the Early Cambrian to Late Ordovician great American carbonate bank on the ancient margin of Laurentia. Cambrian-Ordovician stratigraphy records an approximately 1-km-thick section and a transition from synrift clastics to passive margin peritidal carbonate buildups to gradually deeper water subtidal to shelf carbonates during foreland basin development associated with the Taconic orogeny. The Paleozoic rocks are weakly folded and block faulted. Large areas of the Champlain Valley are covered by undifferentiated glacial deposits, some of which contain mapped landslides. The map also shows waste rock piles and tailings from historical mining operations and large areas of artificial fill. This study was undertaken to improve our understanding of the bedrock geology in the Adirondack Highlands, establish a modern framework for 1:24,000-scale bedrock geologic mapping in the Adirondacks, provide a context for historical iron mines in the eastern Adirondacks, and update the stratigraphy of the Champlain Valley in New York and Vermont. This Scientific Investigations Map of the Crown Point 7.5-minute quadrangle consists of a map sheet, an explanatory pamphlet, and a geographic information system database that includes bedrock geologic units, faults, outcrops, and structural geologic information. The map sheet includes a bedrock geologic map, a correlation of map units, a description of map units, an explanation of map symbols, three cross sections, and a simplified surficial geologic map that includes lidar percent slope. The explanatory pamphlet includes a discussion of the geology. The bedrock geologic map on the map sheet is multi-layered and has been designed to enable the user to turn off the surficial map layer to view the concealed bedrock map units.

New York, Vermont↗

USGS2022

U-Pb and fission-track data from zircon and apatite resolve latest- and post-Alleghanian thermal histories along the Fall Line of the Atlantic margin of the southeastern United States

Although the Atlantic continental margin of the eastern United States is an archetypal passive margin, episodes of rejuvenation following continental breakup are increasingly well documented. To better constrain this history of rejuvenation along the southern portion of this continental margin, we present zircon U-Pb (ZUPb) age, zircon fission-track (ZFT) age, apatite U-Pb (AUPb) age, and apatite fission-track (AFT) age and length data from six bedrock samples. The samples were collected along the boundary between the exposed Appalachian hinterland (Piedmont province) and the updip limit of passive margin strata (Coastal Plain province). The samples were collected from central Virginia southward to the South Carolina–Georgia border. ZUPb age distributions are generally consistent with geologic mapping in each of the sample areas. The AUPb data are highly discordant owing to high common-Pb abundances, but for two plutons at the northern and southern ends of the sample area, they define a discordia regression line that indicates substantial Permo-Triassic exhumation-driven cooling. ZFT age distributions are highly dispersed but define central values ranging from Permian to Jurassic. AFT data mostly appear to define a singular underlying cooling age, generally approximately Jurassic or Early Cretaceous. Apatite fission tracks are moderately long (mean lengths in the range of ~13.5 µm), however track lengths for one sample in central North Carolina are shorter (~12.5 µm). To interpret the post-breakup thermal history, we present inverse models of time-temperature history for the five plutonic samples. The models show a history of (1) rapid cooling (>10 °C/m.y.) from deep-crustal to near-surface temperatures by the Triassic, (2) hundreds of degrees of Triassic reheating, (3) Jurassic–Early Cretaceous cooling (at rates of 1–10 °C/m.y.), and (4) slow Late Cretaceous–Cenozoic cooling (~1 °C/m.y.). An additional suite of forward models is presented to further evaluate the magnitude of maximum Triassic reheating at one sample site that is particularly well constrained by thermal maturity data. The model results and geologic reasoning suggest that the inverse models may overestimate Triassic paleotemperatures but that other aspects of the inverse modeling are robust. Overall, this thermal history can be reconciled with several aspects of the lithostratigraphy of distal parts of the continental margin, including the lack of Jurassic–earliest Cretaceous strata beneath the southern Atlantic coastal plain and Cretaceous–Cenozoic grain-size trends.

Geosphere↗

USGS2022

Germanium redistribution during weathering of Zn mine wastes: Implications for environmental mobility and recovery of a critical mineral

Germanium (Ge) is a metal used in emerging energy technologies, communications, and defense, and has been deemed critical by the United States due to its essential applications and scarce supply. Germanium is recovered as a byproduct of zinc (Zn) sulfides, and mining and processing of these materials lead to waste that could act both as a source of extractable Ge and a source for exposure to humans and ecosystems. Yet the distribution, speciation, and mineral hosts of Ge in mining-impacted areas are poorly understood. The Tar Creek Superfund Site, a former Zn mining area and Ge producer, is a natural laboratory to understand the environmental behavior and economic implications of Ge in mine wastes. We studied the distribution and behavior of Ge in solid wastes at the Tar Creek Superfund Site using bulk and microanalytical techniques. In wastes at this site we find that Ge has been redistributed from its original host, sphalerite (ZnS), to the fine-grained weathering product hemimorphite (Zn4Si2O7(OH)2·H2O), which impacts germanium's mobility, bioaccessibility, and potential for recovery. We provide chemical and mineralogical evidence of this redistribution, along with an evaluation of the oxidation state and molecular-scale substitution of Ge into sphalerite, hemimorphite, and quartz. Geochemical modeling shows that hemimorphite is more stable than sphalerite in waste piles and provides a stable secondary repository for Ge. However, hemimorphite is fine-grained, and if ingested or inhaled is readily soluble, with the potential to release Ge. Lastly, we discuss other sites internationally where similar behavior may be important. This study shows that weathering can have a significant impact on the distribution, speciation, and mineral hosts of Ge in mine wastes; directly influence mobilization from waste piles and subsequent availability to humans and ecosystems; and dictate metallurgical strategies to target Ge for recovery.

Oklahoma↗

USGS2022

Evaluating aromatization of solid bitumen generated in the presence and absence of water: Implications for solid bitumen reflectance as a thermal proxy

Geological models for petroleum generation suggest thermal conversion of oil-prone sedimentary organic matter in the presence of water promotes increased liquid saturate yield, whereas absence of water causes formation of an aromatic, cross-linked solid bitumen residue. To test the influence of hydrogen from water, organic-rich (22 wt% total organic carbon , TOC) mudrock samples from the Eocene lacustrine Green River Formation Mahogany zone oil shale were pyrolyzed under hydrous and anhydrous conditions in closed system batch reactors at temperatures between 300 and 370 °C for 72 h. Pre- and post-pyrolysis samples were characterized using petrographic approaches including optical microscopy , reflectance, Raman spectroscopy , and scanning electron and transmission electron microscopy to quantify differences in relative appearance, abundance, and composition of solid bitumen newly generated during the pyrolysis experiments. Petrographic analyses were supplemented by geochemical screening measurements (TOC content and programmed temperature pyrolysis). Results show post-hydrous pyrolysis residues contain lower TOC, are comprised of solid bitumen with greater aromaticity , and have textures indicative of lower viscosities, relative to anhydrous residues from the same temperature pyrolysis conditions. These observations suggest solid bitumen forming from thermal conversion of oil-prone sedimentary organic matter under anhydrous conditions may be less aromatic, although more cross-linked, than solid bitumen forming under hydrous conditions at the same time-temperature combination. To explain these results, we suggest that a radical disproportionation mechanism is favored in the presence of hydrogen donated from water, and that this disproportionation promotes aromatization in the solid residue with concomitant expulsion of saturated hydrocarbons.

International Journal of Coal Geology↗