Search USGSSearch

Geology topics

Myung W. Lee

Publications and source records attributed to Myung W. Lee.

At least 91 records · Page 5Linked to original sources

A method of estimating the amount of in-situ gas hydrates in deep marine sediments

The bulk volume of gas hydrate in marine sediment can be estimated by measuring interval velocities and amplitude blanking of hydrated zones from true-amplitude processed multichannel seismic reflection data. In general, neither velocity nor amplitude information is adequate to independently estimate hydrate concentration. We propose a method that uses amplitude blanking calibrated by interval-velocity information to quantify hydrate concentrations in the Blake Ridge area of the U.S. Atlantic continental margin. On the Blake Ridge, blanking occurs in conjunction with relatively low interval velocities. The model that best explains this relation linearly mixes two end-member sediments, hydrated and unhydrated sediment. Hydrate concentration in the hydrate end-member can be calculated from a weighted equation that uses velocity estimated from the seismic data, known properties of pure hydrate, and porosity inferred from a velocity/porosity relationship. Amplitude blanking can be predicted as the proportions of hydrated and unhydrated sediment change across a reflection boundary. Our analysis of a small area near DSDP 533 indicates that the amount of gas hydrates is about 6% in total volume when interval velocity is used as a criterion and about 9.5% when amplitude information is used. This compares with a calculated value of about 8% derived from the only available measurement in DSDP 533.

Open-File Report

Deep crustal structure of the Precambrian basement beneath northern Lake Michigan, midcontinent North America

A deep seismic-reflection profile in northern Lake Michigan, midcontinent North America, provides a cross section of the crust across the 1850 Ma Penokean orogen, in which an Early Proterozoic island-arc complex was deformed between two converging Archean continental masses. The island-arc crust is about 40 km thick and has a few kilometres of intensely reflective rocks near its base, above which it is variably reflective to transparent. The Archean terranes have thicker crust, as much as 50 km, the lower 20-25 km of which is strongly reflective. Abrupt offsets of Moho near terrane boundaries may have been preserved since accretion during the Penokean orogeny.

Geology

An analysis of a seismic reflection from the base of a gas hydrate zone, offshore Peru

Seismic reflection data recorded near ODP Site 688, offshore Peru, exhibit a persistent bottom-simulating reflector (BSR) from a depth corresponding to the theoretical base of the gas hydrate stability field. Although gas hydrate has been recovered in cores from scientific drilling in both the Pacific and the Atlantic, drilling in areas exhibiting a BSR has usually been avoided because of the perceived risk of releasing free gas trapped beneath the hydrated sediments. To carry out a quantitative analysis of the BSR, the seismic data were reprocessed using signature deconvolution and true amplitude recovery techniques. Synthetic seismograms that were created using acoustic parameters extracted from the seismic data and physical properties from Site 688 borehole measurement were compared to the observed seismic data to estimate the thickness of the free-gas zone. Results indicate the BSR is discontinuous laterally. Where the BSR is of high amplitude, free gas in a zone 5.5-17 m thick beneath the hydrated sediments provides the observed waveform; where the BSR amplitude is low, the free-gas zone is much thinner than 5.5 m or is entirely absent.

American Association of Petroleum Geologists Bulle

Pre- and poststack migration of GLIMPCE reflection data

GLIMPCE deep Seismic reflection profiles across the Midcontinent Rift System beneath Lake Superior reveal a central asymmetric rift with an enormous thickness of volcanic and sedimentary rocks. True amplitude cmp-processing, poststack and prestack migration and forward modelling are used to improve images of steeply dipping faults, unconformities and other discontinuities in the deep Seismic data. With prestack migration important steeply dipping structural features of the Lake Superior data set are revealed for the first time. Improved images of high-angle normal faults, later reactivated as reverse faults, provide key structural information for understanding the evolution of the rift system. Results illustrate that structural interpretations of complex deep reflection records, such as those recorded by GLIMPCE, should always be based on migrated data. Furthermore, depth-migrated sections provide useful starting models for forward velocity modelling of seismic data.

Lake Superior

Patrick Draw field, Wyoming - 1 seismic expression of subtle strat trap in Upper Cretaceous Almond

The east flank of the Rock Springs uplift and the adjacent Wamsutter arch contain several large hydrocarbon accumulations. Among these accumulations are Patrick Draw field, which produces oil and gas from a stratigraphic trap in the Upper Cretaceous Almond formation, and Table Rock field, a faulted anticlinal trap that produces gas from multiple Tertiary, Mesozoic, and Paleozoic reservoirs. The principal petroleum reservoir in Patrick Draw field is a sandstone at the top of the Almond formation. This sandstone attains a maximum thickness of 35ft and piches out westward into relatively impervious silt-stone and shale that constitute the trapping facies. The objective of this investigation is to determine whether or not the stratigraphic trap at Patrick Draw can be detected on a 12 fold, common depth point seismic profile acquired by Forest Oil Corp. and its partners. The seismic line is 18.5 miles long and crosses Patrick Draw and Table Rock fields.

Wyoming

Processing and attenuation of noise in deep seismic-reflection data from the Gulf of Maine

The U.S. Geological Survey deep crustal studies reflection profile across the Gulf of Maine off southeastern New England was affected by three sources of noise: side-scattered noise, multiples, and 20-Hz whale sounds. The special processing most effective in minimizing this noise consisted of a combination of frequency-wavenumber (F-K) filtering, predictive deconvolution, and spectral whitening, each applied in the shot domain (prestack). Application of the F-K filter to remove side-scatter noise in the poststack domain resulted in a much poorer quality profile. The prestack noise suppression processing techniques resulted in a reflection profile with good signal-to-noise ratios and reliable strong reflections, especially at depths equivalent to the lower crust (24-34 km). Certain geologic features, such as a buried rift basin and a crustal fault are resolved much better within the upper crust after this processing. Finite difference migration of these data using realistic velocities produced excellent results. Migration was essential to distinguish between abundant dipping and subhorizontal reflections in the lower crust as well as to show an essentially transparent upper mantle. ?? 1989 Kluwer Academic Publishers.

Marine Geophysical Research

Low-frequency radiation from point sources in a fluid-filled borehole

Far-field displacement fields have been derived for an impulsive point force acting on a fluid-filled borehole wall under the assumption that the borehole diameter is small compared to the wavelength involved. The displacements due to an arbitrary source can be computed easily by combining the solutions for the impulsive sources. In general, the borehole source generates not only longitudinal and vertically polarized shear waves, but also horizontally polarized shear waves. This study also indicates that only the axisymmetric motion around the borehole due to normal stress is affected by the fluid in the borehole. In the long-wavelength limit, the presence of the fluid does not affect the radiation from tangential sources into the surrounding medium.

Geophysics

Optimization of one-way wave equations

The theory of wave extrapolation is based on the square-root equation or one-way equation. The full wave equation represents waves which propagate in both directions. On the contrary, the square-root equation represents waves propagating in one direction only.

Geophysics