Search USGS⌕ Search

Geology topics

Myung W. Lee

Publications and source records attributed to Myung W. Lee.

At least 73 records · Page 4Linked to original sources
USGS2001

Reprocessing of multi-channel seismic-reflection data collected in the Chukchi Sea

Contained on this set of two CD-ROMs are stacked and migrated multi-channel seismic-reflection data for 44 lines recorded in the Chukchi Sea, northern Alaska, by the United States Geological Survey in 1977, 1978, and 1980. All data were reprocessed by the USGS in 2000 using updated methods. The resulting final data have both increased temporal and spatial resolution thus providing improved interpretability. An added benefit of these CD-ROMs is that they are a more stable, long-term archival medium for the data.

Open-File Report↗
USGS2000

Gas hydrates amount estimated from acoustic logs at the Blake Ridge, Sites 994, 995, and 997

The amount of in situ methane hydrates present in marine sediments is estimated at Ocean Drilling Program (ODP) Leg 164 drill sites on the Blake Ridge using acoustic logs. A weighted equation developed for relating the amount of hydrates concentrated in the pore space of unconsolidated sediments to the increase of acoustic velocities is applied to the acoustic logs using three sets of porosity distribution (porosity derived from bulk density logs, core porosity, and linear approximation of core porosity). Generally, the gas hydrate concentration increases with increasing depth toward the bottom-simulating reflector (BSR). The average gas hydrate concentration in the pore space varies between 12.1%, using porosity from the bulk density, and 3.8%, using core-derived porosity. The average hydrate concentrations in the pore space using core porosities are 3.9% (2.2 vol% of sediment), 5.7% (3.3 vol%) and 3.8% (2.2 vol%) at Sites 994, 995, and 997 respectively. These estimated concentrations are comparable to those calculated from chloride anomalies at these sites.

Proceedings of the Ocean Drilling Program: Scienti↗
USGS2000

Processing strategy for water-gun seismic data from the Gulf of Mexico

In order to study the regional distribution of gas hydrates and their potential relationship to a large-scale sea-fl oor failures, more than 1,300 km of near-vertical-incidence seismic profi les were acquired using a 15-in3 water gun across the upper- and middle-continental slope in the Garden Banks and Green Canyon regions of the Gulf of Mexico. Because of the highly mixed phase water-gun signature, caused mainly by a precursor of the source arriving about 18 ms ahead of the main pulse, a conventional processing scheme based on the minimum phase assumption is not suitable for this data set. A conventional processing scheme suppresses the reverberations and compresses the main pulse, but the failure to suppress precursors results in complex interference between the precursors and primary refl ections, thus obscuring true refl ections. To clearly image the subsurface without interference from the precursors, a wavelet deconvolution based on the mixedphase assumption using variable norm is attempted. This nonminimum- phase wavelet deconvolution compresses a longwave- train water-gun signature into a simple zero-phase wavelet. A second-zero-crossing predictive deconvolution followed by a wavelet deconvolution suppressed variable ghost arrivals attributed to the variable depths of receivers. The processing strategy of using wavelet deconvolution followed by a secondzero- crossing deconvolution resulted in a sharp and simple wavelet and a better defi nition of the polarity of refl ections. Also, the application of dip moveout correction enhanced lateral resolution of refl ections and substantially suppressed coherent noise.

Bulletin↗
USGS2000

Regional seismic lines reprocessed using post-stack processing techniques: National Petroleum Reserve, Alaska

This CD-ROM contains stacked, migrated, 2-Dimensional seismic reflection data and associated support information for 22 regional seismic lines (3,470 line-miles) recorded in the National Petroleum Reserve – Alaska (NPRA) from 1974 through 1981. Together, these lines constitute about one-quarter of the seismic data collected as part of the Federal Government’s program to evaluate the petroleum potential of the Reserve. The regional lines, which form a grid covering the entire NPRA, were created by combining various individual lines recorded in different years using different recording parameters. These data were reprocessed by the USGS using modern, post-stack processing techniques, to create a data set suitable for interpretation on interactive seismic interpretation computer workstations. Reprocessing was done in support of ongoing petroleum resource studies by the USGS Energy Program. The CD-ROM contains the following files: 1) 22 files containing the digital seismic data in standard, SEG-Y format; 2) 1 file containing navigation data for the 22 lines in standard SEG-P1 format; 3) 22 small scale graphic images of each seismic line in Adobe Acrobat ® PDF format; 4) a graphic image of the location map, generated from the navigation file, with hyperlinks to the graphic images of the seismic lines; 5) an ASCII text file with cross-reference information for relating the sequential trace numbers on each regional line to the line number and shotpoint number of the original component lines; and 6) an explanation of the processing used to create the final seismic sections (this document). The SEG-Y format seismic files and SEG-P1 format navigation file contain all the information necessary for loading the data onto a seismic interpretation workstation.

Alaska↗
USGS2000

Reprocessing of multi-channel seismic-reflection data collected in the Beaufort Sea

Contained on this set of two CD-ROMs are stacked and migrated multi-channel seismic-reflection data for 65 lines recorded in the Beaufort Sea by the United States Geological Survey in 1977. All data were reprocessed by the USGS using updated processing methods resulting in improved interpretability. Each of the two CD-ROMs contains the following files: 1) 65 files containing the digital seismic data in standard, SEG-Y format; 2) 1 file containing navigation data for the 65 lines in standard SEG-P1 format; 3) an ASCII text file with cross-reference information for relating the sequential trace numbers on each line to cdp numbers and shotpoint numbers; 4) 2 small scale graphic images (stacked and migrated) of a segment of line 722 in Adobe Acrobat (R) PDF format; 5) a graphic image of the location map, generated from the navigation file; 6) PlotSeis, an MS-DOS Application that allows PC users to interactively view the SEG-Y files; 7) a PlotSeis documentation file; and 8) an explanation of the processing used to create the final seismic sections (this document).

Open-File Report↗
USGS1999

Processing of single channel air and water gun data for imaging an impact structure at the Chesapeake Bay

Processing of 20 seismic profiles acquired in the Chesapeake Bay area aided in analysis of the details of an impact structure and allowed more accurate mapping of the depression caused by a bolide impact. Particular emphasis was placed on enhancement of seismic reflections from the basement. Application of wavelet deconvolution after a second zero-crossing predictive deconvolution improved the resolution of shallow reflections, and application of a match filter enhanced the basement reflections. The use of deconvolution and match filtering with a two-dimensional signal enhancement technique (F-X filtering) significantly improved the interpretability of seismic sections.

Bulletin↗
USGS1996

Seismic velocities for hydrate-bearing sediments using weighted equation

A weighted equation based on the three-phase time-average and Wood equations is applied to derive a relationship between the compressional wave (P wave) velocity and the amount of hydrates filling the pore space. The proposed theory predicts accurate P wave velocities of marine sediments in the porosity range of 40-80% and provides a practical means of estimating the amount of in situ hydrate using seismic velocity. The shear (S) wave velocity is derived under the assumption that the P to S wave velocity ratio of the hydrated sediments is proportional to the weighted average of the P to S wave velocity ratios of the constituent components of the sediment. In the case that all constituent components are known, a weighted equation using multiphase time-average and Wood equations is possible. However, this study showed that a three-phase equation with modified matrix velocity, compensated for the clay content, is sufficient to accurately predict the compressional wave velocities for the marine sediments. This theory was applied to the laboratory measurements of the P and S wave velocities in permafrost samples to infer the amount of ice in the unconsolidated sediment. The results are comparable to the results obtained by repeatedly applying the two-phase wave scattering theory. The theory predicts that the Poisson's ratio of the hydrated sediments decreases as the hydrate concentration increases and the porosity decreases. In consequence, the amplitude versus offset (AVO) data for the bottom-simulating reflections may reveal positive, negative, or no AVO anomalies depending on the concentration of hydrates in the sediments.

Journal of Geophysical Research B: Solid Earth↗
USGS1996

Amplitude blanking in seismic profiles from Lake Baikal

Imaging of the deepest sedimentary section in Lake Baikal using multichannel seismic profiling was hampered by amplitude blanking that is regionally extensive, is associated with water depths greater than about 900 m and occurs at sub-bottom depths of 1-2 km in association with the first water-bottom multiple. Application of a powerful multiple suppression technique improved the quality of occasional discontinuous, dipping primary reflections, but failed to substantially alter the non-reflective character of the blanking zone. Detailed analysis of amplitudes from original data and synthetic models show that the threshold for detecting primary energy in deep water of Lake Baikal occurs when the primary is about 14-20 dB less than the multiple energy. The blanking occurs because of anomalously low reflectivities of the deep sediments coupled with this 20 dB limitation in real data processing. The blanking cuts across seismic stratal boundaries, and is therefore probably unrelated to depositional lithologies. The deepest, early rift deposits, inferred to come from a mixed fluvial and lacustrine setting, do not easily explain the widespread and uniform character of the blanked deposits. More likely, blanking occurs because of processes or phenomena that physically alter the deposits, causing them to be non-reflective and/or highly attenuating. No single process explains all the observations, but a combination of diagenesis, overpressure, and the presence of dispersed free gas at sub-bottom depths of 1-2 km, offer plausible and possible conditions that contribute to blanking. Copyright ?? 1996 Published by Elsevier Science Ltd.

Marine and Petroleum Geology↗
USGS1996

National energy research seismic library; Powder River basin, Montana-Wyoming; surface reflection and vertical seismic profile data used in seismic-stratigraphic investigations for ground-water aquifers and hydrocarbon traps

This Digital Data Series publication contains both raw and processed seismic data recorded during the period 1975 through 1978 by several geophysical service companies under contract to the USGS in the following study areas of the Powder River Basin, Montana and Wyoming: 1. Powder River and Custer Counties, MT (T. 1 S., T. 1-2 N., R. 53-54 E.) 2. Carter County, MT (T. 57-58 N., R. 65 W.) and Crook County, WY (T. 9 S., R.57-58 E.) 3. Powder River and Carter Counties, MT (T. 8 S., R. 53-55 E.) 4. Niobrara County, WY (T. 36-38 N., R. 61-62 W.) and Weston County, WY (T. 45 N., R. 61 W.) Four multichannel Vibroseis seismic lines, six Vertical Seismic Profiles (VSP's), and associated support material (observer's notes, X-Y coordinates, elevations of source and receivers, for example) are included. The raw (unprocessed) field data and a processed version of each surface profile and VSP are contained in standard SEG-Y format files; support material are in ASCII format text files. The processed surface data are versions which were reprocessed by the USGS in 1995 using state-of-the-art seismic data processing software.

Data Series↗
USGS1995

Maps showing gas-hydrate distribution off the east coast of the United States

These maps present the inferred distribution of natural-gas hydrate within the sediments of the eastern United States continental margin (Exclusive Economic Zone) in the offshore region from Georgia to New Jersey (fig. 1). The maps, which were created on the basis of seismic interpretations, represent the first attempt to map volume estimates for gas hydrate. Gas hydrate forms a large reservoir for methane in oceanic sediments. Therefore it potentially may represent a future source of energy and it may influence climate change because methane is a very effective greenhouse gas. Hydrate breakdown probably is a controlling factor for sea-floor landslides, and its presence has significant effect on the acoustic velocity of sea-floor sediments.

East Coast↗