Geology topics

Marieke Dechesne

Publications and source records attributed to Marieke Dechesne.

18 recordsLinked to original sources

USGS2026

Forest canopy decline under elevated CO2 during the Paleocene-Eocene Thermal Maximum

Uncertainty remains regarding the impact of rapid anthropogenic warming on forest ecosystem structure, biodiversity, and function. As an analog, we reconstruct forest canopy density and compositional change in Wyoming, USA, through the Paleocene-Eocene Thermal Maximum (PETM), an interval of abrupt carbon increase and warming ~56 million years ago. We develop a proxy to quantify leaf area index and assess shifts in floral composition using palynomorphs. Forest canopies opened abruptly at onset of PETM warming, landscape erosion increased, and vegetation shifted from broad-leaved angiosperm to fern- and palm-dominated ecosystems. When combined with regional data, these patterns suggest that continental-scale changes in plant communities cause landscape destabilization. These shifts also have implications for multimillennial-scale hydrologic and carbon cycle feedbacks in the climate system.

Wyoming↗

USGS2026

Constraining the onset of carboniferous cyclicity in the Arkoma Basin of the Midcontinent, North America: Implications for calibrating a globally significant latest Bashkirian transgression

Cyclothems are defined by the repeat juxtaposition of littoral and open marine successions over short stratigraphic distances (meters to 10's of meters) and are interpreted to be driven by glacioeustatic forcing of sea level during the late Paleozoic Ice Age. The concept of cyclothems was defined in the Midcontinent region of the United States. However, correlating the Midcontinent region to other cyclic successions is difficult, which is the result of no geochronologic control for the Midcontinent biostratigraphic framework. We present the first high-resolution U Pb zircon CA-ID-TIMS and feldspar 40 Ar/ 39 Ar age control for the onset of Midcontinent cyclothem deposition in the Arkoma Basin, Arkansas USA. Geochronologic control is obtained from a volcaniclastic unit preserved in the newly recovered Dare Creek #1 core. We integrate these data with biostratigraphic, lithostratigraphic and trace element analyses to investigate the timing, stratigraphic and geochemical response to late Paleozoic climate forcing. The lowermost Atoka Formation is associated with the onset of five high frequency transgressive-regressive cycles, which are defined by nearshore sandstones juxtaposed on top of offshore marine mudstones and are associated with changes in salinity and redox conditions. The Trace Creek Member of the lower Atoka Formation hosts a thick, organic-rich black shale, which defines the last and maximum transgression of the lower Atoka Formation in the Arkoma Basin, in the latest Bashkirian. Base-level records from time equivalent stratigraphic successions from Arrow Canyon, Nevada, U.S.A. and the Donets Basin, Ukraine also record a maximum transgression in the latest Bashkirian. The synchroneity of maximum flooding events from multiple basins which span the low latitudes in the latest Bashkirian support that cyclothem deposition was controlled by allostratigraphic forcing mechanisms, likely glacioeustatic forcing resulting from dynamic glaciation in high-latitude Gondwana.

Arkansas, Oklahoma↗

USGS2025

Cenozoic stratigraphy of Colorado

As a successor to previous Colorado stratigraphy charts (MS-53 Colorado Stratigraphic Chart and MS-54 Cretaceous Stratigraphy of Colorado), this Colorado Geological Survey (CGS) publication resulted from a collaboration between the CGS, USGS, and the Denver Museum of Nature and Science (DMNS). The chart was designed to illustrate Cenozoic stratigraphy spanning the state’s many sedimentary basins. It builds upon the work of dozens of colleagues and updates Richard Pearl’s seminal 1974 stratigraphy chart. The chart leverages the community’s stratigraphic work in both the subsurface and outcrop, and depicts new geochronologic constraints for many units. To facilitate comparison of strata to external forcing factors, the chart employs a linear timescale. Each unit’s dominant depositional environment is depicted, as are major mountain building events, erosional events, and regional unconformities.

Colorado↗

USGS2024

Peri-Gondwanan sediment in the Arkoma Basin derived from the north: The detrital zircon record of a uniquely concentrated non-Laurentian source signal in the late Paleozoic

During the assembly of Pangea, peri-Gondwanan terranes collided with the eastern and southern margins of Laurentia and brought with them unique detrital zircon U-Pb signatures. Discriminating between individual peri-Gondwanan terranes in the detrital record is difficult due to their similar geologic histories. However, characterization of this provenance is critical for understanding late Paleozoic sediment routing during development of Pangea. Along southeastern Laurentia, in the Arkoma Basin (present-day Arkansas and eastern Oklahoma, southeastern United States), we identified Middle Pennsylvanian (Desmoinesian) strata that exhibit a concentrated peri-Gondwanan detrital zircon signature (e.g., ca. 800–550 Ma). Although several southern peri-Gondwanan terranes (e.g., Maya, Suwannee) are closer to the Arkoma Basin, geologic data, such as predominantly north-to-south paleocurrents and proximal-to-distal facies relationships in these Desmoinesian strata, support a northern source (e.g., Ganderia, Avalonia, Meguma). Further evidence of a northern source comes from detrital zircon source mapping, which reveals the persistence of this peri-Gondwanan signal in depocenters to the north of the basin after the signal had diminished in the Arkoma Basin. To this end, bottom-up detrital zircon source modeling, source mapping, regional stratigraphy, paleocurrent data, and sandstone petrography allow us to reconstruct the evolution of this Middle Pennsylvanian (Desmoinesian) sediment pathway in the context of intraplate and plate-margin tectonic activity. This reconstruction documents processes affecting Earth’s surface (e.g., tectonics, climate) during the assembly of Pangea and describes in detail part of a dynamic continental-scale drainage system.

Geosphere↗

USGS2024

Influence of inherited structure on flexural extension in foreland basin systems: Evidence from the northern Arkoma basin and southern Ozark dome, USA

Extensional faults are key components of foreland basin systems. They form within the upper crust in response to flexure of the lithosphere and accommodate subsidence within the foredeep and forebulge depozones. Such faults are excellent proxies for orogenic system evolution and control the distribution of natural resources and hazards. However, the spatiotemporal evolution of flexural extension has not been documented previously at a regional scale, thereby limiting our understanding of underlying geodynamic controls. Here, we resolve late Paleozoic flexural extension in the northern Arkoma basin and southern Ozark dome, USA. We synthesize a large database of previous mapping, existing research, subsurface data, and geophysical data into 3D geologic and 2D kinematic models. Mesh surfaces representing several key horizons from the Carboniferous Period (ca. 335-306 Ma) were constructed. These surfaces were built from oil and gas well tops (n = ∼10,000) and surface geologic map contacts using an advanced kriging method. The mesh surfaces are offset by a complex 3D fault network, allowing detailed analysis of along-strike and down-dip variations in fault displacement. Analysis of the 3D model reveals a regular and repeated fault segmentation pattern wherein E -W striking, left- and foreland-stepping en échelon normal faults are segmented by inherited NE striking basement faults. Maximum vertical separation along the E -W normal faults is generally focused between the inherited NE-trending faults. This suggests that the inherited basement faults delocalized extensional strain during late Paleozoic normal faulting. Maximum vertical separation and fault localization may correlate to areas with high-amplitude positive magnetic anomalies interpreted as Mesoproterozoic granitic rocks. Speculative covariance of magnetic anomalies and fault displacements implies that the relatively strong basement granite concentrated stress, leading to localized faulting within the relatively thin sedimentary cover. Lastly, we show that flexural extension migrated southeast to northwest from the Chesterian-Morrowan (ca. 335-319 Ma) to the Desmoinesian (ca. 306 Ma). The migratory flexural extension may be explained by diachronous loading during Pangean assembly, or by synchronous loading but variable load compensation due to inherent factors.

Arkansas, Oklahoma↗

USGS2022

The Seamless Integrated Geologic Mapping (SIGMa) extension to the Geologic Map Schema (GeMS)

Geologic maps are the fundamental building blocks of surface and subsurface three-dimensional geologic framework models of the Earth’s crust. However, as the production and availability of geologic map databases continues to increase, inconsistent data models and the lack of synthesized, national geologic map data at scales appropriate for informed decision making negatively affect the functional integration of geologic map data with other national datasets. The Geologic Map Schema (GeMS) is the publication and archive database standard for geologic map data funded by the U.S. Geological Survey National Cooperative Geologic Mapping Program, and standardizes the organization and content of a single map database. However, synthesizing multiple databases into a seamless geologic map database creates a different set of challenges and database needs than GeMS was designed to accommodate. The Seamless Integrated Geologic Mapping (SIGMa) extension is designed to expand the capabilities of GeMS by enabling integration of map-based geoscience data. In particular, the SIGMa extension enables capturing a diverse and ever-changing set of map units, produced by many contributors operating independently, and by incremental and noncontiguous assembly and publication. Feature-level metadata fields allow data sources and digital compilation methods to be attributed separately and a relational structure is designed to support the link between data sources and features attributed with multiple data sources. Instead of paragraph-style map-unit descriptions that can be highly inconsistent, SIGMa parses fundamental map-unit attributes, including material, genetic process, and age, into thematically specific fields. The SIGMa extension uses a hierarchical map-unit organization to facilitate a dynamic and evolving, formation-level stratigraphic framework. The hierarchy is developed around geologic provinces that represent temporally restricted geologic events, processes, and settings. Geologic provinces can include magmatic events, depositional settings associated with tectonic processes or stable continental margins, and processes that are actively shaping the modern landscape. A geologic province hierarchy places map units into a geologic context at subregional to continental scales and provides the flexibility to support incremental assembly of the stratigraphy.

Scientific Investigations Report↗

USGS2022

Tectonic influence on axial-transverse sediment routing in the Denver Basin

Detrital zircon U-Pb and (U-Th)/He ages from latest Cretaceous–Eocene strata of the Denver Basin provide novel insights into evolving sediment sourcing, recycling, and dispersal patterns during deposition in an intracontinental foreland basin. In total, 2464 U-Pb and 78 (U-Th)/He analyses of detrital zircons from 21 sandstone samples are presented from outcrop and drill core in the proximal and distal portions of the Denver Basin. Upper Cretaceous samples that predate uplift of the southern Front Range during the Laramide orogeny (Pierre Shale, Fox Hills Sandstone, and Laramie Formation) contain prominent Late Cretaceous (84–77 Ma), Jurassic (169–163 Ma), and Proterozoic (1.69–1.68 Ga) U-Pb ages, along with less abundant Paleozoic through Archean zircon grain ages. These grain ages are consistent with sources in the western U.S. Cordillera, including the Mesozoic Cordilleran magmatic arc and Yavapai-Mazatzal basement, with lesser contributions of Grenville and Appalachian zircon recycled from older sedimentary sequences. Mesozoic zircon (U-Th)/He ages confirm Cordilleran sources and/or recycling from the Sevier orogenic hinterland. Five of the 11 samples from syn-Laramide basin fill (latest Cretaceous–Paleocene D1 Sequence) and all five samples from the overlying Eocene D2 Sequence are dominated by 1.1–1.05 Ga zircon ages that are interpreted to reflect local derivation from the ca. 1.1 Ga Pikes Peak batholith. Corresponding late Mesoproterozoic to early Neoproterozoic zircon (U-Th)/He ages are consistent with local sourcing from the southern Front Range that underwent limited Mesozoic–Cenozoic unroofing. The other six samples from the D1 Sequence yielded detrital zircon U-Pb ages similar to pre-Laramide units, with major U-Pb age peaks at ca. 1.7 and 1.4 Ga but lacking the 1.1 Ga age peak found in the other syn-Laramide samples. One of these samples yielded abundant Mesozoic and Paleozoic (U-Th)/He ages, including prominent Early and Late Cretaceous peaks. We propose that fill of the Denver Basin represents the interplay between locally derived sediment delivered by transverse drainages that emanated from the southern Front Range and a previously unrecognized, possibly extraregional, axial-fluvial system. Transverse alluvial-fluvial fans, preserved in proximal basin fill, record progressive unroofing of southern Front Range basement during D1 and D2 Sequence deposition. Deposits of the upper and lower D1 Sequence across the basin were derived from these fans that emanated from the southern Front Range. However, the finer-grained, middle portion of the D1 Sequence that spans the Cretaceous-Paleogene boundary was deposited by both transverse (proximal basin fill) and axial (distal basin fill) fluvial systems that exhibit contrasting provenance signatures. Although both tectonic and climatic controls likely influenced the stratigraphic development of the Denver Basin, the migration of locally derived fans toward and then away from the thrust front suggests that uplift of the southern Front Range may have peaked at approximately the Cretaceous-Paleogene boundary.

Colorado↗

USGS2021

Geologic and hydrogeologic characteristics of the White River Formation, Lance Formation, and Fox Hills Sandstone, northern greater Denver Basin, southeastern Laramie County, Wyoming

In cooperation with the Wyoming State Engineer’s Office, the U.S. Geological Survey studied the geologic and hydrogeologic characteristics of Cenozoic and Upper Cretaceous strata at a location in southeastern Laramie County within the Wyoming part of the Cheyenne Basin, the northern subbasin of the greater Denver Basin. The study aimed to improve understanding of the aquifers/aquifer systems in these strata, motivated in part by declining groundwater levels and interest in exploring future groundwater supplies. Based on detailed geologic characterization using information obtained by drilling and coring a 960-foot-(ft) deep exploratory borehole, and comparisons with previously published descriptions, identified Cenozoic lithostratigraphic units included 40 ft of Quaternary older alluvial fan deposits consisting of an unconsolidated mixture of sand and gravel with lesser quantities of silt and clay in varying proportions and the underlying 407.3-ft-thick White River Formation of late Eocene-Oligocene age consisting largely of mudrocks with sparse thin beds of sandstone, muddy gravel, and conglomeratic mudrocks. Identified Upper Cretaceous lithostratigraphic units included the 351.6-ft-thick Lance Formation, consisting of terrestrial sedimentary rocks including mudrocks (muddy shale and silty and sandy shale, siltstone, claystone, and mudstone) interbedded with much smaller quantities of very fine- to medium-grained muddy and silty sandstone and coal; the 79.6-ft-thick Fox Hills Sandstone, consisting of a transitional marine sequence of muddy or silty sandstone present in five individual beds; and 86.7 ft of the upper transition member of the Pierre Shale, consisting largely of marine sedimentary rocks such as muddy shale. Beds of the upper and lower Fox Hills Sandstone were separated by tongues of the Lance Formation and upper transition member of the Pierre Shale, respectively. The White River hydrogeologic unit, consisting of the entire White River Formation or Group at the study site, did not contain any substantial secondary permeability features in the mudrocks that composed almost all the unit. A monitoring well (BR–1) was completed in the White River aquifer with the well screen open to the only coarse-grained unit (muddy sandstone) that had sufficient thickness and permeability to be considered as an aquifer. Sampling of the well for a broad suite of constituents indicated groundwater generally was of excellent quality except dissolved arsenic was detected at a concentration greater than the U.S. Environmental Protection Agency (EPA) Maximum Contaminant Level, and dissolved sodium was measured at a concentration greater than several EPA Drinking Water Advisory Levels (DWAs) for the constituent. Well development, well purging for groundwater sampling, and calculated aquifer properties indicated the sandstone aquifer screened by monitoring well BR–1 was not very productive. Analysis of the well water-level responses in BR–1 to atmospheric loading and Earth tides indicated the responses were consistent with a confined-aquifer response with wellbore-storage effects. Hydraulic properties estimated based on these responses yielded values of hydraulic conductivity ( K , 0.057 foot per day [ft/d]), specific storage ( Ss , 1.6×10 −6 per foot [ft −1 ]) and porosity ( n , 0.43). Water levels filtered to remove the effects of atmospheric loading and Earth tides indicated an upward trend (+1.13 foot per year [ft/yr]) during the period analyzed, September 5, 2014, to September 30, 2017. Lithologic characteristics of the Lance hydrogeologic unit, consisting of the entire Lance Formation at the study site, indicated a potential aquifer in a “sandy” interval in the upper part of the unit. Most of the Lance hydrogeologic unit below the “sandy” interval consisted of various low-permeability lithologies unlikely to yield substantial quantities of water. This lower part of the hydrogeologic unit likely functions as a confining unit separating the underlying Lance-Fox Hills aquifer. A geologic cross section constructed for this study indicated fine-grained sediments composed most of the Lance Formation/hydrogeologic unit not only at the study location, but also throughout southern Laramie County along the line of section and throughout the Wyoming and Colorado parts of the Cheyenne Basin. A monitoring well (LN–1) completed in a sandstone bed in the “sandy” interval of the Lance hydrogeologic unit produced a mean of about 23 gallons per minute (gal/min) during well development, indicating sandstone beds can form moderately productive confined subaquifers in this part of the hydrogeologic unit. Analysis of the well water-level responses in well LN–1 to atmospheric loading and Earth tides indicated the responses were consistent with a confined-aquifer response. Hydraulic properties estimated based on these responses yielded values for a lower bounding K of 0.60 ft/d, Ss of 1.6×10 −6 ft −1 , and n of 0.38. Water levels filtered to remove the effects of atmospheric loading and Earth tides indicated a downward trend (−0.86 ft/yr) during the period analyzed (November 8, 2014, to September 30, 2017). Analyses for a broad suite of constituents in samples from well LN–1 indicated groundwater quality generally was excellent, although dissolved sodium was measured at a concentration greater than two EPA DWA levels for the constituent. Because of the absence of any overlying or intertonguing sandstone beds belonging to the lower/basal part of the Lance Formation, the Lance-Fox Hills aquifer at the study site consisted only of the five sandstone beds of the Fox Hills Sandstone. The cross section constructed for this study illustrated how the Fox Hills Sandstone, and thus, most of the Lance-Fox Hills aquifer, consists of a series of sandstone bodies that overlap (shingle) upward to the east across southern Laramie County. These bodies collectively form a fairly continuous body of sandstone, thus potentially forming an areally extensive aquifer across southern Laramie County, and by extension, throughout most of the formation’s extent in the Wyoming part of the Cheyenne Basin, as is the case in the Colorado part of the basin. A monitoring well (FH–1) completed in part of the thickest sandstone bed of the Lance-Fox Hills aquifer was moderately to highly productive and easily produced 25 to 30 gal/min after development. Substantially larger water production rates likely could be obtained by penetrating the full thickness of this bed and by completing a well open to the other overlying and underlying sandstone beds of the aquifer. Analysis of the water-level responses in well FH–1 to atmospheric loading and Earth tides indicated the responses were consistent with a confined-aquifer response. Hydraulic properties computed based on these responses yielded values for a lower bounding estimate for K of 0.26 ft/d, for Ss of 1.0×10 −6 ft −1 , and for n of 0.41. Water levels filtered to remove the effects of atmospheric loading and Earth tides indicated a downward trend (−1.74 ft/yr) during the period analyzed, December 19, 2014, to September 30, 2017. Sampling of monitoring well FH–1 and two production wells completed in the Fox Hills Sandstone in other parts of Laramie County indicated groundwater quality generally is excellent, although pH exceeded a recommended EPA aesthetic drinking-water standard (Secondary Maximum Contaminant Level) in two of three sampled wells, total dissolved solids concentrations exceeded the Secondary Maximum Contaminant Level in one of the two sampled production wells, and dissolved sodium was measured in all three sampled wells at a concentration greater than two EPA DWA levels for the constituent. The Wyoming Class II agricultural (irrigation) sodium adsorption ratio standard of 8 was exceeded in all three sampled wells, indicating these waters are not suitable for irrigation use. Computed vertical hydraulic gradients indicated a strong potential for downward flow throughout the groundwater system at the study site, including from the low-yielding aquifer in the upper White River Formation/hydrogeologic unit (monitoring well BR–1) to the sandstone subaquifer in the Lance Formation/hydrogeologic unit (monitoring well LN–1), and from the Lance subaquifer (monitoring well LN–1) to the sandstone bed/aquifer that composes much of the Lance-Fox Hills aquifer thickness at the study site (monitoring well FH–1). However, large hydraulic-head differences between wells indicated high resistance to vertical flow attributable to the low vertical hydraulic conductivity of intervening strata, which consisted almost entirely of low-permeability mudrocks. The confined nature of the sandstone aquifers monitored by the various wells coupled with dissimilarities between groundwater-level fluctuations and trends in groundwater levels indicated downward flow through the intervening strata (primarily mudrocks in the various lithostratigraphic/hydrogeologic units) between the examined sets of wells likely was small.

Wyoming↗

USGS2021

Evidence for variable precipitation and discharge from Upper Cretaceous–Paleogene fluvial deposits of the Raton Basin, Colorado–New Mexico, U.S.A.

The Raton Basin of Colorado–New Mexico, USA, is the southeasternmost basin of the Laramide intraforeland province of North America. It hosts a thick succession (4.5 km or 15,000 ft) of Upper Cretaceous to Paleogene marine and continental strata that were deposited in response to the final regression of the Western Interior Seaway and the onset of Laramide intraforeland deformation. The Upper Cretaceous–Paleogene Raton and Poison Canyon formations were previously described as meandering river and braided river deposits that represented distal and proximal members of rivers that drained the basin-bounding Sangre de Cristo–Culebra uplift. We present new observations of fluvial-channel architecture that show that both formations contain the deposits of sinuous fluvial channels. However, fluvial channels of the Raton Formation formed in ever-wet environments and were affected by steady discharge, whereas channels of the overlying Poison Canyon Formation formed in drier environments and were affected by variable discharge. The apparent transition in fluvial discharge characteristics was coeval with the progradation of fluvial fans across the Raton Basin during the Paleocene, emanating from the ancestral Sangre de Cristo–Culebra uplift. The construction of fluvial fans, coupled with the sedimentary features observed within, highlights the dual control of Laramide deformation and early Cenozoic climatic patterns on the sedimentary evolution of the Raton Basin.

Colorado, New Mexico↗

USGS2021

Beach placer mineral deposits along localized paleoshorelines of the western Interior Seaway, upper cretaceous Fox Hills sandstone, eastern Denver Basin, Colorado

Beach placers deposited within the Fox Hills Sandstone along the eastern flank of the Denver Basin contain minerals deemed critical in 2018 by the U.S. Department of the Interior. These marine beach placers, or paleoplacers, were deposited in the Late Cretaceous along the western edge of the retreating Western Interior Seaway (WIS). Preliminary investigations determined that these deposits contain potential critical mineral resources including titanium, zirconium, hafnium, and rare earth elements (REE). This report contains the results of a limited investigation conducted by the CGS in this area to provide additional information on the nature of these mineral deposits. The following tasks were completed during this investigation: review and summary of publicly available documents and publications; collection of samples and stratigraphic analysis of accessible outcrops; mineralogical analysis of select samples; and laboratory analysis of samples for select critical mineral concentrations. This report may assist with future mineral exploration efforts in this area and provide insight into the retreat of the WIS during the Late Cretaceous.

Report↗

USGS2020

A new stratigraphic framework and constraints for the position of the Paleocene-Eocene boundary in the rapidly subsiding Hanna Basin, Wyoming

The Paleocene–Eocene strata of the rapidly subsiding Hanna Basin give insights in sedimentation patterns and regional paleogeography during the Laramide orogeny and across the climatic event at the Paleocene–Eocene Thermal Maximum (PETM). Abundant coalbeds and carbonaceous shales of the fluvial, paludal, and lacustrine strata of the Hanna Formation offer a different depositional setting than PETM sections described in the nearby Piceance and Bighorn Basins, and the uniquely high sediment accumulation rates give an expanded and near-complete record across this interval. Stratigraphic sections were measured for an ~1250 m interval spanning the Paleocene–Eocene boundary across the northeastern syncline of the basin, documenting depositional changes between axial fluvial sandstones, basin margin, paludal, floodplain, and lacustrine deposits. Leaf macrofossils, palynology, mollusks, δ13C isotopes of bulk organic matter, and zircon sample locations were integrated within the stratigraphic framework and refined the position of the PETM. As observed in other basins of the same age, an interval of coarse, amalgamated sandstones occurs as a response to the PETM. Although this pulse of relatively coarser sediment appears related to climate change at the PETM, it must be noted that several very similar sandstone bodies occur with the Hanna Formation. These sandstones occur in regular intervals and have an apparent cyclic pattern; however, age control is not sufficient yet to address the origin of the cyclicity. Signs of increased ponding and lake expansion upward in the section appear to be a response to basin isolation by emerging Laramide uplifts.

Wyoming↗

USGS2019

Plant and insect herbivore community variation across the Paleocene–Eocene boundary in the Hanna Basin, southeastern Wyoming

Ecosystem function and stability are highly affected by internal and external stressors. Utilizing paleobotanical data gives insight into the evolutionary processes an ecosystem undergoes across long periods of time, allowing for a more complete understanding of how plant and insect herbivore communities are affected by ecosystem imbalance. To study how plant and insect herbivore communities change during times of disturbance, we quantified community turnover across the Paleocene–Eocene boundary in the Hanna Basin, southeastern Wyoming. This particular location is unlike other nearby Laramide basins because it has an abundance of late Paleocene and Eocene coal and carbonaceous shales and paucity of well-developed paleosols, suggesting perpetually high water availability. We sampled approximately 800 semi-intact dicot leaves from five stratigraphic levels, one of which occurs late in the Paleocene–Eocene thermal maximum (PETM). Field collections were supplemented with specimens at the Denver Museum of Nature & Science. Fossil leaves were classified into morphospecies and herbivore damage was documented for each leaf. We tested for changes in plant and insect herbivore damage diversity using rarefaction and community composition using non-metric multidimensional scaling ordinations. We also documented changes in depositional environment at each stratigraphic level to better contextualize the environment of the basin. Plant diversity was highest during the mid-late Paleocene and decreased into the Eocene, whereas damage diversity was highest at the sites with low plant diversity. Plant communities significantly changed during the late PETM and do not return to pre-PETM composition. Insect herbivore communities also changed during the PETM, but, unlike plant communities, rebound to their pre-PETM structure. These results suggest that insect herbivore communities responded more strongly to plant community composition than to the diversity of species present.

Wyoming↗

USGS2019

Geologic map of the Hartsel Quadrangle, Park County, Colorado

The Hartsel quadrangle sits nearly in the center of the complex South Park Laramide structural basin. Generally, the basin can be described as an asymmetrical down-faulted feature, dipping to the east. It is bounded by two northwest-trending uplifts: the Sawatch uplift to the west and the Front Range uplift to the east. The west-verging Elkhorn thrust, which places Proterozoic intrusive and metamorphic rocks within the Front Range uplift over Phanerozoic sediments in the basin, passes just east of the quadrangle. Seismic data and deep oil and gas well logs indicate that a series of imbricate thrust faults extend west, and in front of, the Elk horn thrust fault. The Hartsel uplift is a westward-jutting structural salient of the Front Range uplift that brings Proterozoic rocks farther into the basin south of the town of Hartsel. The quadrangle also spans the late Paleozoic boundary between the central Colorado trough (DeVoto, 1972) to the west and Frontrangia (Mallory, 1958) to the east. The Neogene Rio Grande rift system lies to the west of South Park Basin in the upper Arkansas River valley. Examples of Neogene extension can be found throughout South Park, as described by Stark and others (1949), De Voto (1971), and Ruleman and others (2011). In addition, there is evidence of ongoing local deformation related to dissolution and possible collapse of Paleozoic evaporite deposits across much of the west side of the basin (Kirkham and others, 2012).

Colorado↗

USGS2016

South Park, Colorado: The interplay of tectonics and sedimentation creates one of Colorado’s crown jewels

Recent mapping efforts and hydrocarbon exploration in the South Park Basin have brought to light the magnitude in complexity of a structural basin already recognized for its unique sedimentary and tectonic setting. This fi eld trip to one of Colorado’s scenic gems will examine how Paleozoic, Mesozoic, and Cenozoic strata record the tectonic signatures of at least three orogenic episodes. We will cross the Elkhorn–Williams Range thrust system into the structural block caught between Laramide uplifts, and preserving synorogenic sediments from the Pennsylvanian– Permian ancestral Rocky Mountain tectonic episode in juxtaposition with synorogenic sediments from the subsequent Laramide tectonic episode. Late Cretaceous marine sediments from the Western Interior Seaway caught up in complex fold-fault structures between Laramide uplifts create targets for petroleum exploration. Evidence of evaporitic tectonism originating from Pennsylvanian evaporite deposits and hinting at structural complexity dots the landscape. The trip will also explore a postLaramide surface preserved in a graben developed in the hanging wall of the Elkhorn fault system and view post-Laramide volcanic features. Glacier-carved ranges held up by Precambrian crystalline basement and Paleozoic sediments hardened by contact metamorphism from Paleogene stocks and sills rim the basin. Pleistocene glaciofl uvial deposits fan out from the high ranges to blanket the highly deformed basin, masking many of the primary structural features.

Colorado↗

USGS2016

Stratigraphic architecture of a fluvial-lacustrine basin-fill succession at Desolation Canyon, Uinta Basin, Utah: Reference to Walthers’ Law and implications for the petroleum industry

A continuous window into the fluvial-lacustrine basin-fill succession of the Uinta Basin is exposed along a 48-mile (77-kilometer) transect up the modern Green River from Three Fords to Sand Wash in Desolation Canyon, Utah. In ascending order the stratigraphic units are: 1) Flagstaff Limestone, 2) lower Wasatch member of the Wasatch Formation, 3) middle Wasatch member of the Wasatch Formation, 4) upper Wasatch member of the Wasatch Formation, 5) Uteland Butte member of the lower Green River Formation, 6) lower Green River Formation, 7) Renegade Tongue of the lower Green River Formation, 8) middle Green River Formation, and 9) the Mahogany oil shale zone marking the boundary between the middle and upper Green River Formations. This article uses regional field mapping, geologic maps, photographs, and descriptions of the stratigraphic unit including: 1) bounding surfaces, 2) key upward stratigraphic characteristics within the unit, and 3) longitudinal changes along the river transect. This information is used to create a north-south cross section through the basin-fill succession and a detailed geologic map of Desolation Canyon. The cross section documents stratigraphic relationships previously unreported and contrasts with earlier interpretations in two ways: 1) abrupt upward shifts in the stratigraphy documented herein, contrast with the gradual interfingering relationships proposed by Ryder et al., (1976) and Fouch et al., (1994) , 2) we document fluvial deposits of the lower and middle Wasatch to be distinct and more widespread than previously recognized. In addition, we document that the Uteland Butte member of the lower Green River Formation was deposited in a lacustrine environment in Desolation Canyon. Two large-scale (member-scale) upward patterns are noted: Waltherian, and non-Waltherian. The upward successions in Waltherian progressions record progradation or retrogradation of a linked fluvial-lacustrine system across the area; whereas the upward successions in non-Waltherian progressions record large-scale changes in the depositional system that are not related to progradation or retrogradation of the ancient lacustrine shoreline. Four Waltherian progressions are noted: 1) the Flagstaff Limestone to lower Wasatch Formation member records the upward transition from lacustrine to fluvial—or shallowing-upward succession; 2) the upper Wasatch to Uteland Butte records the upward transition from fluvial to lacustrine—or a deepening upward succession; 3) the Uteland Butte to Renegade Tongue records the upward transition from lacustrine to fluvial—a shallowing-upward succession; and 4) the Renegade Tongue to Mahogany oil shale interval records the upward transition from fluvial to lacustrine—a deepening upward succession. The two non-Waltherian progressions in the study area are: 1) the lower to middle Wasatch, which records the abrupt shift from low to high net-sand content fluvial system, and 2) the middle to upper Wasatch, which records the abrupt shift from high to intermediate net-sand content fluvial system.

Utah↗

USGS2016

Field guide to Laramide basin evolution and drilling activity in North Park and Middle Park, Colorado

Overview of the geologic history of the North Park–Middle Park area and its past and recent drilling activity. Field trip stops highlight basin formation and the consequences of geologic configuration on oil and gas plays and development. The starting point is the west flank of the Denver Basin to compare and contrast the latest Cretaceous through Eocene basin fill on both flanks of the Front Range, before exploring sediments of the same age in the North Park – Middle Park intermontane basin.

Colorado↗

USGS2013

Laramide basin CSI: Comprehensive stratigraphic investigations of Paleogene sediments in the Colorado Headwaters Basin, north-central Colorado

The Paleogene sedimentary deposits of the Colorado Headwaters Basin provide a detailed proxy record of regional deformation and basin subsidence during the Laramide orogeny in north-central Colorado and southern Wyoming. This field trip presents extensive evidence from sedimentology, stratigraphy, structure, palynology, and isotope geochronology that shows a complex history that is markedly different from other Laramide synorogenic basins in the vicinity. We show that the basin area was deformed by faulting and folding before, during, and after deposition of the Paleogene rocks. Internal unconformities have been identified that further reflect the interaction of deformation, subsidence, and sedimentation. Uplift of Proterozoic basement blocks that make up the surrounding mountain ranges today occurred late in basin history. Evidence is given to reinterpret the Independence Mountain uplift as the result of significant normal faulting (not thrusting), probably in middle Tertiary time. While the Denver and Cheyenne Basins to the east were subsiding and accumulating sediment during Late Cretaceous time, the Colorado Headwaters Basin region was experiencing vertical uplift and erosion. At least 1200 m of the upper part of the marine Upper Cretaceous Pierre Shale was regionally removed, along with Fox Hills Sandstone shoreline deposits of the receding Interior Seaway as well as any Laramie Formation–type continental deposits. Subsidence did not begin in the Colorado Headwaters Basin until after 60.5 Ma, when coarse, chaotic, debris-flow deposits of the Paleocene Windy Gap Volcanic Member of the Middle Park Formation began to accumulate along the southern basin margin. These volcaniclastic conglomerate deposits were derived from local, mafic-alkalic volcanic sources (and transitory deposits in the drainage basin), and were rapidly transported into a deep lake system by sediment gravity currents. The southern part of the basin subsided rapidly (roughly 750–1000 m/m.y.) and the drainage system delivered increasing proportions of arkosic debris from uplifted Proterozoic basement and more intermediate-composition volcanic-porphyry materials from central Colorado sources. Other margins of the Colorado Headwaters Basin subsided at slightly different times. Subsidence was preceded by variable amounts of gentle tilting and localized block-fault uplifts. The north-central part of the basin that was least-eroded in early Paleocene time was structurally inverted and became the locus of greatest subsidence during later Paleocene-Eocene time. Middle Paleocene coal-mires formed in the topographically lowest eastern part of the basin, but the basin center migrated to the western side by Eocene time when coal was deposited in the Coalmont district. In between, persistent lakes of variable depths characterized the central basin area, as evidenced by well-preserved deltaic facies. Fault-fold deformation within the Colorado Headwaters Basin strongly affected the Paleocene fluvial-lacustrine deposits, as reflected in the steep limbs of anticline-syncline pairs within the McCallum fold belt and the steep margins of the Breccia Spoon syncline. Slivers of Proterozoic basement rock were also elevated on steep reverse faults in late Paleocene time along the Delaney Butte–Sheep Mountain–Boettcher Ridge structure. Eocene deposits, by and large, are only gently folded within the Colorado Headwaters Basin and thus reflect a change in deformation history. The Paleogene deposits of the Colorado Headwaters Basin today represent only a fragment of the original extent of the depositional basin. Basal, coarse conglomerate deposits that suggest proximity to an active basin margin are relatively rare and are limited to the southern and northwestern margins of the relict basin. The northeastern margin of the preserved Paleogene section is conspicuously fine-grained, which indicates that any contemporaneous marginal uplift was far removed from the current extent of preserved fluvial-lacustrine sediments. The conspicuous basement uplifts of Proterozoic rock that flank the current relict Paleogene basin deposits are largely post-middle Eocene in age and are not associated with any Laramide synuplift fluvial deposits. The east-west–trending Independence Mountain fault system that truncates the Colorado Headwaters Basin on the north with an uplifted Proterozoic basement block is reinterpreted in this report. Numerous prior analyses had concluded that the fault was a low-angle, south-directed Laramide thrust that overlapped the northern margin of the basin. We conclude instead that the fault is more likely a Neogene normal fault that truncates all prior structure and belongs to a family of sub-parallel west-northwest–trending normal faults that offset upper Oligocene-Miocene fluvial deposits of the Browns Park–North Park Formations.

Colorado↗

USGS2008

Stratigraphic models for deep-water sedimentary systems

Stratigraphic models predict sedimentary architecture. Prediction requires understanding systems across a sufficient range of scales. To be predictive a model must address the interaction of multiple process-response relationships. For deep-water systems these processes include (1) subaqueous flow initiation and transformation, (2) linkages between channel, levee and lobe processes, and (3) shelf-to-basin profile evolution. Thickness, lithology and the geomorphic hierarchy of sedimentary bodies are responses that can be used to define phases in deep-water episodes recording both external (allogenic) and internal (autogenic) controls. Shelf-to-basin studies of the Middle Permian Brushy Canyon Formation demonstrate that the more complete basinal record correlates to an incomplete shelf record; this incongruity impacts recognition of allogenic forcing. Preserving the signature of external controls, internal changes in local gradient and topography also impact the deep-water record requiring complete basin analysis. Independent but nested autogenic and allogenic stratigraphic models address these challenges and predict patterns of deep-water sedimentation. Tectonics and climate modulate sediment supply and sea level, which are considered the principal allogenic controls on deep-water sedimentation as described by the phases of the AIGR ( Adjustment-Initiation-Growth-Retreat ) model. The complete AIGR cycle commences with the Adjustment (A) phase, which defines the initial profile gradient and topography. The Initiation (I), Growth (G), and Retreat (R) phases describe variations in sedimentary response. Autogenic controls on deep-water sedimentation include (1) lateral offset and compensational stacking of lobes, (2) channel migration, switching and avulsion, and (3) longitudinal translation of the channel-lobe transition zone. The BCFS ( Build-Cut-Fill-Spill ) model describes autogenic controls on local gradient and confinement based on a hierarchy of channel-fill, channel-flank, and lobe sedimentary bodies, which vary in proportion and arrangement in each phase. The sedimentation phases of the AIGR and BCFS models describe the systematic increase and decrease in sedimentation energy recorded in hierarchical stratigraphy. When linked to gradient, the models form the axes of a sedimentary system energy matrix (SSEM) for sedimentary architecture. The BCFS model for submarine channels is embedded within the AIGR basin model and, together they facilitate the correlation of a hierarchy of internally and externally generated stratigraphic cycles.

Book chapter↗