Geology topics

Lydia M. Staisch

Publications and source records attributed to Lydia M. Staisch.

25 records · Page 2Linked to original sources

USGS2018

Bedrock mapping and seismic hazard assessment at Gold Basin landslide, Washington

The Gold Basin landslide is located along the South Fork Stillaguamish River, within the Mount Baker-Snoqualmie National Forest in western Washington State. Recent concerns related to slope stability after the 2014 State Route 530 Landslide near Oso, Washington, forced the closure of the U.S. Forest Service Gold Basin Campground in May of 2014. In addition to safety concerns for National Forest visitors, the landslide-derived sediment pulses shed into the South Fork Stillaguamish River may harm migrant salmon spawning grounds, an important resource for the Stillaguamish Tribe of Indians and for public anglers. The Gold Basin landslide is composed of three active lobes and has an approximate footprint of 566,560 m 2 . Each lobe consists of steep topographic escarpments contained largely within Pleistocene glacial outwash sediments and debris flow and earth flow deposits at the base. In addition to landslides confined within the Pleistocene glacial strata, bedrock landslides are also apparent on lidar imagery of the study area. Bedrock landslides may pose additional hazard to the area, either during stochastic hillslope failure or during strong ground motion events. Potential seismic sources include the proximal Darrington-Devils Mountain and southern Whidbey Island fault zones, as well as the offshore Cascadia Subduction Zone. Previous analyses of hillslope stability in the Cascade Range suggests that rock mass strength is a useful way of characterizing bedrock and fracture patterns in order to understand potential landslide-prone landscape. The goals of this investigation are to assess the glacial strata and bedrock geology of the Gold Basin landslide and adjacent areas and to assess how the geology and geomorphology within the study area affect the likelihood of coseismic landsliding.

Washington↗

USGS2018

Crustal structure and quaternary acceleration of deformation rates in central Washington revealed by stream profile inversion, potential field geophysics, and structural geology of the Yakima folds

Post‐Miocene tectonic uplift along fault‐cored anticlines within central Washington produced the Yakima Fold Province, a region of active NNE‐SSW shortening in the Cascadian backarc. The relative timing and rate of deformation along individual structures is coarsely defined yet imperative for seismic hazard assessment. In this work, we use geomorphic and geophysical mapping, stream profile inversion, and balanced cross‐section methods to constrain fault geometries and slip rates in the Yakima Canyon region. We extract stream profiles from LiDAR data and analytically solve for the rate of relative rock uplift along several active fault‐cored anticlines. To constrain the fault geometries at depth and the long‐term magnitude of deformation, we constructed two line‐balanced cross sections across the folds with forward‐modeled magnetic and gravity anomaly data. Our stream profile results indicate an increase of incision rates in the Pleistocene, and we infer the increase is tectonically controlled. We estimate modern slip rates between 0.4 and 0.6 mm/year accommodated on reverse faults that core the Manastash Ridge, Umtanum Ridge, and Selah Butte anticlines and establish that these faults reactivate and invert older normal faults in basement rocks. Finally, we calculate the time required to accumulate sufficient strain energy for a large magnitude earthquake (M ≥ 7) along individual structures in the Yakima Fold Province. Results show that the Yakima folds likely accommodate large magnitude earthquakes and that it takes several hundred to several thousand years to accumulate sufficient strain energy for an M ≥ 7 earthquake.

Washington↗

USGS2018

Geothermal potential of the Umatilla Indian Reservation, Oregon: Evidence from detailed geophysical investigations

Recent geologic and geophysical investigations were undertaken in northeastern Oregon to better assess earthquake hazards in the region and determine relative favorability for geothermal energy development on lands of the Confederated Tribes of the Umatilla Indian Reservation (CTUIR). This work was funded in part by a Bureau of Indian Affairs grant awarded to the CTUIR to identify areas most suitable for further exploration of geothermal resources. Results from this work were utilized as inputs to a geothermal favorability modeling process that led to the identification of target sites for further geothermal investigation. Beyond the geothermal aspect of this project, the region is of great tectonic significance as it marks the intersection of two major physiographic and geophysical features, the Klamath-Blue Mountain lineament (KBL) and Olympic-Wallowa lineament (OWL), inferred to represent major basement boundaries. The Thorn Hollow and Hite faults, which appear to be major linkages between the KBL and OWL, run through the study area. New aeromagnetic, gravity and magnetotelluric (MT) surveying, along with fault analyses, were conducted as part of this effort. Detailed geophysical exploration resulted in the collection of 1,380 new gravity stations, 34,524-line kilometers of aeromagnetic data (covering 12,524 km2) and measurements from 36 MT stations. Two-dimensional (2D) forward-modeling was executed along several profiles using gravity and aeromagnetic data, combined with existing geologic mapping and rock property constraints measured from hand samples and outcrops. These models are used to define lithologic contacts in the subsurface in the absence of well logs or borehole data to determine possible geothermal fluid reservoirs, as well as identify major structures that may act as conduits for the upward migration of geothermal fluids.

Oregon↗

USGS2017

The story of a Yakima fold and how it informs Late Neogene and Quaternary backarc deformation in the Cascadia subduction zone, Manastash anticline, Washington, USA

The Yakima folds of central Washington, USA, are prominent anticlines that are the primary tectonic features of the backarc of the northern Cascadia subduction zone. What accounts for their topographic expression and how much strain do they accommodate and over what time period? We investigate Manastash anticline, a north vergent fault propagation fold typical of structures in the fold province. From retrodeformation of line- and area-balanced cross sections, the crust has horizontally shortened by 11% (0.8–0.9 km). The fold, and by inference all other folds in the fold province, formed no earlier than 15.6 Ma as they developed on a landscape that was reset to negligible relief following voluminous outpouring of Grande Ronde Basalt. Deformation is accommodated on two fault sets including west-northwest striking frontal thrust faults and shorter north to northeast striking faults. The frontal thrust fault system is active with late Quaternary scarps at the base of the range front. The fault-cored Manastash anticline terminates to the east at the Naneum anticline and fault; activity on the north trending Naneum structures predates emplacement of the Grande Ronde Basalt. The west trending Yakima folds and west striking thrust faults, the shorter north to northeast striking faults, and the Naneum fault together constitute the tectonic structures that accommodate deformation in the low strain rate environment in the backarc of the Cascadia Subduction Zone.

Washington↗

USGS2017

Miocene−Pleistocene deformation of the Saddle Mountains: Implications for seismic hazard in central Washington, USA

The Yakima fold province, located in the backarc of the Cascadia subduction zone, is a region of active strain accumulation and deformation distributed across a series of fault-cored folds. The geodetic network in central Washington has been used to interpret large-scale N-S shortening and westward-increasing strain; however, geodetic data are unable to resolve shortening rates across individual structures in this low-strain-rate environment. Resolving fault geometries, slip rates, and timing of faulting in the Yakima fold province is critically important to seismic hazard assessment for nearby infrastructure and population centers. The Saddle Mountains anticline is one of the most prominent Yakima folds. It is unique within the Yakima fold province in that the syntectonic strata of the Ringold Formation are preserved and provide a record of deformation and drainage reorganization. Here, we present new stratigraphic columns, U-Pb zircon tephra ages, U-series caliche ages, and geophysical modeling that constrain two line-balanced and retrodeformed cross sections. These new constraints indicate that the Saddle Mountains anticline has accommodated 1.0−1.3 km of N-S shortening since 10 Ma, that shortening increases westward along the anticline, and that the average slip rate has increased 6-fold since 6.8 Ma. Provenance analysis suggests that the source terrane for the Ringold Formation was similar to that of the modern Snake River Plain. Using new slip rates and structural constraints, we calculate the strain accumulation time, interpretable as a recurrence interval, for earthquakes on the Saddle Mountains fault and find that large-magnitude earthquakes could rupture along the Saddle Mountains fault every 2−11 k.y.

Washington↗

USGS2016

Differential uplift and incision of the Yakima River terraces, central Washington State

The fault-related Yakima folds deform Miocene basalts and younger deposits of the Columbia Plateau in central Washington State. Geodesy implies ~2 mm/yr of NNE directed shortening across the folds, but until now the distribution and rates of Quaternary deformation among individual structures has been unclear. South of Ellensburg, Washington, the Yakima River cuts a ~600 m deep canyon across several Yakima folds, preserving gravel-mantled strath terraces that record progressive bedrock incision and related rock uplift. Here we integrate cosmogenic isochron burial dating of the strath terrace gravels with lidar analysis and field mapping to quantify rates of Quaternary differential incision and rock uplift across two folds transected by the Yakima River: Manastash and Umtanum Ridge. Isochron burial ages from in situ produced 26 Al and 10 Be at seven sites across the folds date episodes of strath terrace formation over the past ~2.9 Ma. Average bedrock incision rates across the Manastash (~88 m/Myr) and Umtanum Ridge (~46 m/Myr) anticlines are roughly 4 to 8 times higher than rates in the intervening syncline (~14 m/Myr) and outside the canyon (~10 m/Myr). These contrasting rates demonstrate differential bedrock incision driven by ongoing Quaternary rock uplift across the folds at rates corresponding to ~0.13 and ~0.06 mm/yr shortening across postulated master faults dipping 30 ± 10°S beneath the Manastash and Umtanum Ridge anticlines, respectively. The reported Quaternary shortening across the anticlines accounts for ~10% of the ~2 mm/yr geodetic budget, suggesting that other Yakima structures actively accommodate the remaining contemporary deformation.

Washington↗

USGS2016

Building a subduction zone observatory

Subduction zones contain many of Earth’s most remarkable geologic structures, from the deepest oceanic trenches to glacier-covered mountains and steaming volcanoes. These environments formed through spectacular events: Nature’s largest earthquakes, tsunamis, and volcanic eruptions are born here.

Eos, Earth and Space Science News↗