Search USGS⌕ Search

Geology topics

Lorraine E. Flint

Publications and source records attributed to Lorraine E. Flint.

84 records · Page 5Linked to original sources

Estimating accumulation rates and physical properties of sediment behind a dam: Englebright Lake, Yuba River, northern California

Studies of reservoir sedimentation are vital to understanding scientific and management issues related to watershed sediment budgets, depositional processes, reservoir operations, and dam decommissioning. Here we quantify the mass, organic content, and grain-size distribution of a reservoir deposit in northern California by two methods of extrapolating measurements of sediment physical properties from cores to the entire volume of impounded material. Englebright Dam, completed in 1940, is located on the Yuba River in the Sierra Nevada foothills. A research program is underway to assess the feasibility of introducing wild anadromous fish species to the river upstream of the dam. Possible management scenarios include removing or lowering the dam, which could cause downstream transport of stored sediment. In 2001 the volume of sediments deposited behind Englebright Dam occupied 25.5% of the original reservoir capacity. The physical properties of this deposit were calculated using data from a coring campaign that sampled the entire reservoir sediment thickness (6–32 m) at six locations in the downstream ∼3/4 of the reservoir. As a result, the sediment in the downstream part of the reservoir is well characterized, but in the coarse, upstream part of the reservoir, only surficial sediments were sampled, so calculations there are more uncertain. Extrapolation from one-dimensional vertical sections of sediment sampled in cores to entire three-dimensional volumes of the reservoir deposit is accomplished via two methods, using assumptions of variable and constant layer thickness. Overall, the two extrapolation methods yield nearly identical estimates of the mass of the reservoir deposit of ∼26 × 10 6 metric tons (t) of material, of which 64.7–68.5% is sand and gravel. Over the 61 year reservoir history this corresponds to a maximum basin-wide sediment yield of ∼340 t/km 2 /yr, assuming no contribution from upstream parts of the watershed impounded by other dams. The uncertainties and limitations of the estimates of overall sediment quantities are discussed. Implications for watershed management and future reservoir sedimentation studies are also presented.

California↗

Fundamental concepts of recharge in the Desert Southwest: A regional modeling perspective

Recharge in arid basins does not occur in all years or at all locations within a basin. In the desert Southwest potential evapotranspiration exceeds precipitation on an average annual basis and, in many basins, on an average monthly basis. Ground-water traveltime from the surface to the water table and recharge to the water table vary temporally and spatially owing to variations in precipitation, air temperature, root zone and soil properties and thickness, faults and fractures, and hydrologic properties of geologic strata in the unsaturated zone. To highlight the fundamental concepts controlling recharge in the Southwest, and address the temporal and spatial variability of recharge, a basin characterization model was developed using a straightforward water balance approach to estimate potential recharge and runoff and allow for determination of the location of recharge within a basin. It provides a means for interbasin comparison of the mechanisms and processes that result in recharge and calculates the potential for recharge under current, wetter, and drier climates. Model estimates of recharge compare favorably with other methods estimating recharge in the Great Basin. Results indicate that net infiltration occurs in less than 5 percent of the area of a typical southwestern basin. Decadal-scale climatic cycles have substantially different influences over the extent of the Great Basin, with the southern portion receiving 220 percent higher recharge than the mean recharge during El Niño years in a positive phase of the Pacific Decadal Oscillation, whereas the northern portion receives only 48 percent higher recharge. In addition, climatic influences result in ground-water travel times that are expected to vary on time scales of days to centuries, making decadal-scale climate cycles significant for understanding recharge in arid lands.

Water Science and Application↗

Report on the May-June 2002 Englebright Lake deep coring campaign

This report describes the May-June 2002 Englebright Lake coring project. Englebright Lake is a 14- km-long reservoir on the Yuba River of northern California, impounded by Englebright Dam, which was completed in 1940. The sediments were cored to assess the current conditions in the reservoir as part of the California Bay-Delta Authority?s Upper Yuba River Studies Program. Sediment was collected using both hydraulic-piston and rotational coring equipment mounted on a floating drilling platform. Thirty boreholes were attempted at 7 sites spaced along the longitudinal axis of the reservoir. Complete sedimentary sections were recovered from 20 boreholes at 6 sites. In total, 335 m of sediment was cored, with 86% average recovery. The core sections (each up to 1.5 m long) were processed using a standard set of laboratory techniques, including geophysical logging of physical properties, splitting, visual descriptions, digital photography, and initial subsampling. This report presents the results of these analyses in a series of stratigraphic columns. Using the observed stratigraphy as a guide, several series of subsamples were collected for various sedimentologic, geochemical, and geochronological analyses. The results of laboratory analyses of most of these subsamples will be presented in future reports and articles.

California↗

Water-quality data from 2002 to 2003 and analysis of data gaps for development of total maximum daily loads in the Lower Klamath River Basin, California

The U.S. Geological Survey (USGS) collected water-quality data during 2002 and 2003 in the Lower Klamath River Basin, in northern California, to support studies of river conditions as they pertain to the viability of Chinook and Coho salmon and endangered suckers. To address the data needs of the North Coast Regional Water Quality Control Board for the development of Total Maximum Daily Loads (TMDLs), water temperature, dissolved oxygen, specific conductance, and pH were continuously monitored at sites on the Klamath, Trinity, Shasta, and Lost Rivers. Water-quality samples were collected and analyzed for selected nutrients, organic carbon, chlorophyll-a, pheophytin-a, and trace elements. Sediment oxygen demand was measured on the Shasta River. Results of analysis of the data collected were used to identify locations in the Lower Klamath River Basin and periods of time during 2002 and 2003 when river conditions were more likely to be detrimental to salmonid or sucker health because of occasional high water temperatures, low dissolved oxygen, and conditions that supported abundant populations of algae and aquatic plants. The results were also used to assess gaps in data by furthering the development of the conceptual model of water flow and quality in the Lower Klamath River Basin using available data and the current understanding of processes that affect water quality and by assessing needs for the develoment of mathematical models of the system. The most notable gap in information for the study area is in sufficient knowledge about the occurrence and productivity of algal communities. Other gaps in data include vertical water-quality profiles for the reservoirs in the study area, and in an adequate understanding of the chemical oxygen demands and the sediment oxygen demands in the rivers and of the influence of riparian shading on the rivers. Several mathematical models are discussed in this report for use in characterizing the river systems in the study area; also discussed are the specific data needed for the models, and the spatial and temporal data available as boundary conditions. The models will be useful for the future development of TMDLs for temperature, nutrients, and dissolved oxygen and for assessing the role of natural and anthropogenic sources of heat, oxygen-producing and -consuming substances, and nutrients in the Klamath, Shasta, and Lost Rivers.

Scientific Investigations Report↗

Physical and hydraulic properties of volcanic rocks from Yucca Mountain, Nevada

A database of physical and hydraulic properties was developed for rocks in the unsaturated zone at Yucca Mountain, Nevada, a site under consideration as a geologic repository for high‐level radioactive waste. The 5320 core samples were collected from 23 shallow (<100 m) and 10 deep (500–1000 m) vertical boreholes. Hydrogeologic units have been characterized in the unsaturated zone [ Flint , 1998] that represent rocks with ranges of welding, lithophysae, and high and low temperature alteration (as a result of the depositional, cooling, and alterational history of the lithostratigraphic layers). Lithostratigraphy, the hydrogeologic unit, and the corresponding properties are described. In addition, the physical properties of bulk density, porosity, and particle density; the hydraulic properties of saturated hydraulic conductivity and moisture retention characteristics; and the field water content were measured and compiled for each core sample.

Nevada↗

Influence of transitional volcanic strata on lateral diversion at Yucca Mountain, Nevada

Natural hydraulic barriers exist at Yucca Mountain, Nevada, a potential high‐level nuclear waste repository, that have been identified as possible lateral diversions for reducing deep percolation through the waste storage area. Historical development of the conceptual model of lateral diversion has been limited by available field data, but numerical investigations presented the possibility of significant lateral diversion due to the presence of a thin, porous rock layer, the Paintbrush nonwelded tuffs. Analytical analyses of the influence of transitional changes in properties suggest that minimal lateral diversion is likely at Yucca Mountain. Numerical models, to this point, have not accounted for the gradual transition of properties or the existence of multiple layers that could inadvertently influence the simulation of lateral diversion as an artifact of numerical model discretization. Analyses were made of subsurface matric potential measurements, and comparisons were made of surface infiltration estimates with deeper percolation flux calculations using chloride‐mass‐balance calculations and simulations of measured temperature profiles. These analyses suggest that insignificant lateral diversion has occurred above the repository horizon and that water generally moves vertically through the Paintbrush nonwelded tuffs.

Water Resources Research↗

Simulation of net infiltration and potential recharge using a distributed-parameter watershed model of the Death Valley region, Nevada and California

This report presents the development and application of the distributed-parameter watershed model, INFILv3, for estimating the temporal and spatial distribution of net infiltration and potential recharge in the Death Valley region, Nevada and California. The estimates of net infiltration quantify the downward drainage of water across the lower boundary of the root zone and are used to indicate potential recharge under variable climate conditions and drainage basin characteristics. Spatial variability in recharge in the Death Valley region likely is high owing to large differences in precipitation, potential evapotranspiration, bedrock permeability, soil thickness, vegetation characteristics, and contributions to recharge along active stream channels. The quantity and spatial distribution of recharge representing the effects of variable climatic conditions and drainage basin characteristics on recharge are needed to reduce uncertainty in modeling ground-water flow. The U.S. Geological Survey, in cooperation with the Department of Energy, developed a regional saturated-zone ground-water flow model of the Death Valley regional ground-water flow system to help evaluate the current hydrogeologic system and the potential effects of natural or human-induced changes. Although previous estimates of recharge have been made for most areas of the Death Valley region, including the area defined by the boundary of the Death Valley regional ground-water flow system, the uncertainty of these estimates is high, and the spatial and temporal variability of the recharge in these basins has not been quantified. To estimate the magnitude and distribution of potential recharge in response to variable climate and spatially varying drainage basin characteristics, the INFILv3 model uses a daily water-balance model of the root zone with a primarily deterministic representation of the processes controlling net infiltration and potential recharge. The daily water balance includes precipitation (as either rain or snow), snow accumulation, sublimation, snowmelt, infiltration into the root zone, evapotranspiration, drainage, water content change throughout the root-zone profile (represented as a 6-layered system), runoff (defined as excess rainfall and snowmelt) and surface water run-on (defined as runoff that is routed downstream), and net infiltration (simulated as drainage from the bottom root-zone layer). Potential evapotranspiration is simulated using an hourly solar radiation model to simulate daily net radiation, and daily evapotranspiration is simulated as an empirical function of root zone water content and potential evapotranspiration. The model uses daily climate records of precipitation and air temperature from a regionally distributed network of 132 climate stations and a spatially distributed representation of drainage basin characteristics defined by topography, geology, soils, and vegetation to simulate daily net infiltration at all locations, including stream channels with intermittent streamflow in response to runoff from rain and snowmelt. The temporal distribution of daily, monthly, and annual net infiltration can be used to evaluate the potential effect of future climatic conditions on potential recharge. The INFILv3 model inputs representing drainage basin characteristics were developed using a geographic information system (GIS) to define a set of spatially distributed input parameters uniquely assigned to each grid cell of the INFILv3 model grid. The model grid, which was defined by a digital elevation model (DEM) of the Death Valley region, consists of 1,252,418 model grid cells with a uniform grid cell dimension of 278.5 meters in the north-south and east-west directions. The elevation values from the DEM were used with monthly regression models developed from the daily climate data to estimate the spatial distribution of daily precipitation and air temperature. The elevation values were also used to simulate atmosp

Water-Resources Investigations Report↗

Evolution of the conceptual model of unsaturated zone hydrology at Yucca Mountain, Nevada

Yucca Mountain is an arid site proposed for consideration as the United States’ first underground high-level radioactive waste repository. Low rainfall (approximately 170 mm/yr) and a thick unsaturated zone (500–1000 m) are important physical attributes of the site because the quantity of water likely to reach the waste and the paths and rates of movement of the water to the saturated zone under future climates would be major factors in controlling the concentrations and times of arrival of radionuclides at the surrounding accessible environment. The framework for understanding the hydrologic processes that occur at this site and that control how quickly water will penetrate through the unsaturated zone to the water table has evolved during the past 15 yr. Early conceptual models assumed that very small volumes of water infiltrated into the bedrock (0.5–4.5 mm/yr, or 2–3 percent of rainfall), that much of the infiltrated water flowed laterally within the upper nonwelded units because of capillary barrier effects, and that the remaining water flowed down faults with a small amount flowing through the matrix of the lower welded, fractured rocks. It was believed that the matrix had to be saturated for fractures to flow. However, accumulating evidence indicated that infiltration rates were higher than initially estimated, such as infiltration modeling based on neutron borehole data, bomb-pulse isotopes deep in the mountain, perched water analyses and thermal analyses. Mechanisms supporting lateral diversion did not apply at these higher fluxes, and the flux calculated in the lower welded unit exceeded the conductivity of the matrix, implying vertical flow of water in the high permeability fractures of the potential repository host rock, and disequilibrium between matrix and fracture water potentials. The development of numerical modeling methods and parameter values evolved concurrently with the conceptual model in order to account for the observed field data, particularly fracture flow deep in the unsaturated zone. This paper presents the history of the evolution of conceptual models of hydrology and numerical models of unsaturated zone flow at Yucca Mountain, Nevada (Flint, A.L., Flint, L.E., Kwicklis, E.M., Bodvarsson, G.S., Fabryka-Martin, J.M., 2001. Hydrology of Yucca Mountain. Reviews of Geophysics in press). This retrospective is the basis for recommendations for optimizing the efficiency with which a viable and robust conceptual model can be developed for a complex site.

Nevada↗

Shallow infiltration processes at Yucca Mountain, Nevada: neutron logging data 1984-93

To determine site suitability of Yucca Mountain, Nevada, as a potential high-level radioactive waste repository, a study was devised to characterize net infiltration. This study involves a detailed data set produced from 99 neutron boreholes that consisted of volumetric water-content readings with depth from 1984 through 1993 at Yucca Mountain. Boreholes were drilled with minimal disturbance to the surrounding soil or rock in order to best represent field conditions. Boreholes were located in topographic positions representing infiltration zones identified as ridgetops, sideslopes, terraces, and active channels. Through careful field calibration, neutron moisture logs, collected on a monthly basis and representing most of the areal locations at Yucca Mountain, illustrated that the depth of penetration of seasonal moisture, important for escaping loss to evapotranspiration, was influenced by several factors. It was increased (1) by thin soil cover, especially in locations where thin soil is underlain by fractured bedrock; (2) on ridgetops; and (3) during the winter when evapotranspiration is low and runoff is less frequent. This data set helps to provide a seasonal and areal distribution of changes in volumetric water content with which to assess hydrologic processes contributing to net infiltration.

Nevada↗

Evaluation of measurement scale using imbibition experiments in volcanic tuffs

A major issue in the site characterization at Yucca Mountain, Nevada, a potential site for a high-level nuclear waste repository, is the relevance of laboratory-scale measurements on cores to field-scale processes, particularly water flow. Calculation of Philip`s sorptivity parameter using imbibition of water into rock was selected as a simple test to describe hydrologic parameters at both laboratory and field scales and to study effects of sample size and spatial variability. Laboratory-scale imbibition experiments were conducted on two sizes of core from two boreholes drilled in layered nonwelded tuff and fractured welded tuff. Laboratory experiments were compared with field experiments in the boreholes using neutron logs and a field-scale Mariotte system. Measured sorptivity for both sizes of core were virtually identical and both could predict field-scale sorptivity if enough samples were used to account for spatial heterogeneity. Core data was less useful in predicting the neutron log data due to the nature of the neutron probe measurement and difficulties in accounting for effects of the unique system geometry. Mean neutron log values could not predict the field results from the welded borehole due to fractures transmitting but not retaining water, and could not predict laboratory results because of scale and sampling volume differences. The mean neutron log data could, however, approximate the large-scale field results in the nonwelded borehole.

Nevada↗

Influence of long term climate change on net infiltration at Yucca Mountain, Nevada

Net infiltration and recharge at Yucca Mountain, Nevada, a potential site for a high level nuclear waste repository, are determined both by the rock properties and past and future changes in climate. A 1-dimensional model was constructed to represent a borehole being drilled through the unsaturated zone. The rock properties were matched to the lithologies expected to be encountered in the borehole. As current paleoclimate theory assumes that 18O increases with wetter and cooler global climates, a past climate scenario, built on depletion of 18O from ocean sediments was used as a basis for climate change over the past 700,000 years. The climate change was simulated by assigning net infiltration values as a linear function of 8O. Assuming the rock properties, lithologies and climate scenarios are correct, simulations indicated that Yucca Mountain is not in steady state equilibrium at the surface (<75 meters) when compared to measured data, but that the system could be at steady state conditions at depths of >250 meters. Based on the cyclic climate inputs, the near surface is currently in a long term drying trend (for the last 3,000 years) yet recharge into the water table is continuing to occur at an average rate equivalent to the average input rate of the climate model, indicating that conditions at depth are damped out over very long time periods. The Paintbrush Tuff nonwelded units, positioned between the Tiva Canyon and Topopah Spring welded Tuff Members, do not appear to act as capillary barrier and therefore would not perch water. The low porosity vitric caprock and basal vitrophyre of the Topopah Spring Member, however, act as restrictive layers. The higher porosity rock directly above the caprock reduces the potential for the caprock to perch water leaving the basal vitrophyre as the most likely location for perched water to develop.

Conference Paper↗