Geology topics

Jonathan A. Warrick

Publications and source records attributed to Jonathan A. Warrick.

At least 55 records · Page 3Linked to original sources

USGS2019

World’s largest dam removal reverses coastal erosion

Coastal erosion outpaces land generation along many of the world’s deltas and a significant percentage of shorelines, and human-caused alterations to coastal sediment budgets can be important drivers of this erosion. For sediment-starved and erosion-prone coasts, large-scale enhancement of sediment supply may be an important, but poorly understood, management option. Here we provide new topographic measurements that show the patterns and trends of beach accretion following the restoration of sediment supply from a massive dam removal project. River sediment was initially deposited in intertidal-to-subtidal deltaic lobes, and this sediment was reworked by ocean waves into subaerial river mouth bars over time scales of several months. These river mouth bars welded to the shoreline and then initiated waves of sediment accretion along adjacent upcoast and downcoast beaches. Although the downcoast shoreline has a high wave-angle setting, the sedimentation waves straightened the downcoast shoreline rather than forming self-organized quasi-periodic instabilities, which suggests that simple coastal evolution theory did not hold under these conditions. Combined with other mega-nourishment projects, these findings provide new understanding of littoral responses to the restoration of sediment supplies.

Washington↗

USGS2019

Characterizing the catastrophic 2017 Mud Creek Landslide, California, using repeat Structure-from-Motion (SfM) photogrammetry

Along the rugged coast of Big Sur, California, the Mud Creek landslide failed catastrophically on May 20, 2017 and destroyed over 400 m of scenic California State Highway 1. We collected structure-from-motion (SfM) photogrammetry data using airborne platforms that, when combined with existing airborne lidar data, revealed that the area exhibited significant topographic change and displacement before, during and after the catastrophic failure. Before the catastrophic failure we document two areas of elevated change in the zone of depletion, which aligned with the double-peaked head scarp produced by the catastrophic failure. The catastrophic failure extended from 337 m elevation to at least 8 m below sea level, was 490 m wide, displaced ~3 million m3 of earth and rock, and deposited landslide debris at least 175 m seaward of the original shoreline. The failure was not a complete slope-clearing event, however, and several upslope and lateral regions that did not slip into the ocean exhibited significant displacement and topographic change during the days and months after catastrophic failure. Additionally, we use the post-slide data to quantify several other processes, including the time-varying rates of talus accumulation and coastal erosion of the landslide toe. We conclude that repeat SfM surveys from aerial imagery can provide valuable information about landslide evolution and the potential for deep-seated landslide hazards – especially in the lead up to catastrophic failure – if photos are collected and processed regularly.

California↗

USGS2019

Optical wave gauging using deep neural networks

We develop a remote wave gauging technique to estimate wave height and period from imagery of waves in the surf zone. In this proof-of-concept study, we apply the same framework to three datasets: the first, a set of close-range monochrome infrared (IR) images of individual nearshore waves at Duck, NC, USA; the second, a set of visible (i.e. RGB) band orthomosaics of a larger nearshore area near Santa Cruz, CA, USA; and the third, a set of oblique (unrectified) images from the same site. The network is trained using coincident images and in situ wave measurements. The optical wave gauge (OWG) consists of a deep convolutional neural network (CNN) to extract features from imagery — called a ‘base model’, with additional layers to distill the feature information into lower dimensional spaces, and a final layer of dense neurons to predict continuously varying quantities. Four base models are compared. The OWG is trained for both individual wave height and period, and statistical quantities like significant wave height and peak wave period. The best performing OWG on the IR dataset achieved RMS errors of 0.14 m and 0.41 s for height and period, respectively, capturing up to 98% of the variance in these quantities. The best performing OWG on the visible band rectified dataset achieved RMS errors of 0.08 m and 0.79 s, respectively, for height and period. The same values for the oblique RGB imagery were 0.11 m and 0.81 s for height and period, respectively. Overall, wave height and period accuracy is sensitive to choice of base model; OWGs built upon MobilenetV2 tend to perform worst and those built on Inception-ResnetV2 have the smallest RMS error. The presence or otherwise of residual layers in the model makes little systematic difference to the final OWG accuracy. Smaller batch sizes used in model training tend to result in more accurate OWGs. An out-of-calibration validation, using images associated with wave heights or periods outside the range of values represented in the training data, showed that the ability for OWGs to predict the bottom 5% of low wave heights and the top 5% of high wave heights was reasonably good, but the same was not generally true of wave period. The same framework, not optimized for either dataset, predicts both quantities with high accuracy when trained on imagery, despite the differences in electromagnetic band, perspective, and scale. The OWG estimates wave properties from an image in less than 100 ms on a modestly sized CPU, allowing for the possibility of continuous real-time wave estimates.

California, North Carolina↗

USGS2019

Integrating structure from motion, numerical modelling and field measurements to understand carbonate sediment transport in coral reef canopies

Reef canopies are complex and extremely variable across a range of spatial scales. This variability affects the velocity above as well as within the canopy, and directly impacts the transport of sediment along the bed as well as suspended in the water column. How a canopy affects the transport of sediment is important to understand and predict changes in the position of the adjacent shoreline, particularly as reefs change. In this study, high-resolution seabed complexity models derived from photogrammetry for low roughness and high roughness canopy sites at Moloka’i (Hawai’i) are combined with direct field measurements and three-dimensional numerical modelling to investigate these canopy and sub-canopy impacts on velocity and sediment transport.

Hawaii↗

USGS2018

Do we know how much fluvial sediment reaches the sea? Decreased river monitoring of U.S. coastal rivers

Given the present and future changing climate and human changes to land use and river control, river sediment fluxes to coastal systems are changing and will continue to change in the future. To delineate these changes and their effects, it is increasingly important to document the fluxes of river-borne sediment discharged to the sea. Unfortunately, broad-scale river sediment monitoring programs established more than 50 years ago in the U.S. have diminished substantially and now focus principally on the largest rivers and estuaries. Unless addressed, these data gaps will provide significant challenges in addressing fundamental scientific and management questions about the effects of climate change and sea-level rise in our estuaries and on our coasts.

Hydrological Processes↗

USGS2018

Morphodynamic evolution following sediment release from the world’s largest dam removal

Sediment pulses can cause widespread, complex changes to rivers and coastal regions. Quantifying landscape response to sediment-supply changes is a long-standing problem in geomorphology, but the unanticipated nature of most sediment pulses rarely allows for detailed measurement of associated landscape processes and evolution. The intentional removal of two large dams on the Elwha River (Washington, USA) exposed ~30 Mt of impounded sediment to fluvial erosion, presenting a unique opportunity to quantify source-to-sink river and coastal responses to a massive sediment-source perturbation. Here we evaluate geomorphic evolution during and after the sediment pulse, presenting a 5-year sediment budget and morphodynamic analysis of the Elwha River and its delta. Approximately 65% of the sediment was eroded, of which only ~10% was deposited in the fluvial system. This restored fluvial supply of sand, gravel, and wood substantially changed the channel morphology. The remaining ~90% of the released sediment was transported to the coast, causing ~60 ha of delta growth. Although metrics of geomorphic change did not follow simple time-coherent paths, many signals peaked 1–2 years after the start of dam removal, indicating combined impulse and step-change disturbance responses.

Washington↗

USGS2018

Projected 21st century coastal flooding in the Southern California Bight. Part 1: Development of the third generation CoSMoS model

Due to the effects of climate change over the course of the next century, the combination of rising sea levels, severe storms, and coastal change will threaten the sustainability of coastal communities, development, and ecosystems as we know them today. To clearly identify coastal vulnerabilities and develop appropriate adaptation strategies due to projected increased levels of coastal flooding and erosion, coastal managers need local-scale hazards projections using the best available climate and coastal science. In collaboration with leading scientists world-wide, the USGS designed the Coastal Storm Modeling System (CoSMoS) to assess the coastal impacts of climate change for the California coast, including the combination of sea-level rise, storms, and coastal change. In this project, we directly address the needs of coastal resource managers in Southern California by integrating a vast range of global climate change projections in a thorough and comprehensive numerical modeling framework. In Part 1 of a two-part submission on CoSMoS, methods and the latest improvements are discussed, and an example of hazard projections is presented.

Journal of Marine Science and Engineering↗

USGS2018

Science partnership between U.S. Geological Survey and the Lower Elwha Klallam Tribe—Understanding the Elwha River Dam Removal Project

After nearly a century of producing power, two large hydroelectric dams on the Elwha River in Washington State were removed during 2011 to 2014 to restore the river ecosystem and recover imperiled salmon populations. Roughly two-thirds of the 21 million cubic meters of sediment—enough to fill nearly 2 million dump trucks—contained behind the dams was released downstream, which restored natural processes and initiated important changes to the river, estuarine, and marine ecosystems. A multidisciplinary team of scientists from the Lower Elwha Klallam Tribe, academia, non-governmental organizations, Federal and state agencies, and the U.S. Geological Survey collected key data before, during, and after dam removal to understand the outcomes of this historic project on the Elwha River ecosystem.

Washington↗

USGS2018

Coherence between coastal and river flooding along the California coast

Water levels around river mouths are intrinsically determined by sea level and river discharge. If storm-associated coastal water-level anomalies coincide with extreme river discharge, landscapes near river mouths will be flooded by the hydrodynamic interactions of these two water masses. Unfortunately, the temporal relationships between ocean and river water masses are not well understood. The coherence between extreme river discharge and coastal water levels at six California river mouths across different climatic and geographic regions was examined. Data from river gauges, wave buoys, and tide gauges from 2007 to 2014 were integrated to investigate the relationships between extreme river discharge and coastal water levels near the mouths of the Eel, Russian, San Lorenzo, Ventura, Arroyo Trabuco, and San Diego rivers. Results indicate that mean and extreme coastal water levels during extreme river discharge are significantly higher compared with background conditions. Elevated coastal water levels result from the combination of nontidal residuals (NTRs) and wave setups. Mean and extreme (>99th percentile of observations) NTRs are 3–20 cm and ∼30 cm higher during extreme river discharge conditions, respectively. Mean and extreme wave setups are up to 40 cm and ∼20–90 cm higher during extreme river discharge than typical conditions, respectively. These water-level anomalies were generally greatest for the northern rivers and least for the southern rivers. Time-series comparisons suggest that increases in NTRs are largely coherent with extreme river discharge, owing to the low atmospheric pressure systems associated with storms. The potential flooding risks of the concurrent timing of these water masses are tempered by the mixed, semidiurnal tides of the region that have amplitudes of 2–2.5 m. In summary, flooding hazard assessments for floodplains near California river mouths for current or future conditions with sea-level rise should include the temporal coherence of fluvial and oceanic water levels.

California↗

USGS2018

Rapid, remote assessment of Hurricane Matthew impacts using four-dimensional structure-from-motion photogrammetry

Timely assessment of coastal landforms and structures after storms is important for evaluating storm impacts, aiding emergency response and restoration, and initializing and assessing morphological models. Four-dimensional multiview photogrammetry, also known as structure from motion (4D SfM), provides a method for generating three-dimensional reconstructions of landscapes at two times (before and after events) using only photos and existing information for ground control points. Here, these techniques were applied using National Oceanic and Atmospheric Administration (NOAA)-obtained oblique aerial photos taken before (2015) and immediately after Hurricane Matthew (2016) to assess coastal changes near Matanzas, Florida. This work demonstrated that 3D digital elevation models can be constructed within 48 hours of postevent photo collection without on-site ground control measurements. One advantage of timely SfM elevation-change assessments is that they avoid confusion of storm impacts with changes that occur after the event but before LIDAR surveys can be performed. The accuracy and precision of the 4D SfM maps were assessed a posteriori using the first-available LIDAR data, which were collected more than a month after the hurricane, and 11 independent ground-truth survey points measured a week after the hurricane. Horizontal coordinates of the 4D SfM reconstruction were biased by an average of 0.79 m (0.83 m root-mean-square difference; RMSD) compared with the ground-truth points, but vertical elevations were more accurate. They were biased from the LIDAR by −0.09 to −0.25 m, with ∼0.20 m RMSD from both the LIDAR data and five ground-truth points with good vertical positioning and 0.25 m RMSD from LIDAR data along a 60-m stretch of pavement. This level of precision was sufficient to quantify geomorphological change that was often in excess of 1 m. The methodology is conducive for rapid assessment of changes along short stretches (tens of kilometers) of coast with modest resources and could be scaled up for larger regions.

Florida↗

USGS2017

Increased sediment load during a large-scale dam removal changes nearshore subtidal communities

The coastal marine ecosystem near the Elwha River was altered by a massive sediment influx—over 10 million tonnes—during the staged three-year removal of two hydropower dams. We used time series of bathymetry, substrate grain size, remotely sensed turbidity, scuba dive surveys, and towed video observations collected before and during dam removal to assess responses of the nearshore subtidal community (3 m to 17 m depth). Biological changes were primarily driven by sediment deposition and elevated suspended sediment concentrations. Macroalgae, predominantly kelp and foliose red algae, were abundant before dam removal with combined cover levels greater than 50%. Where persistent sediment deposits formed, macroalgae decreased greatly or were eliminated. In areas lacking deposition, macroalgae cover decreased inversely to suspended sediment concentration, suggesting impacts from light reduction or scour. Densities of most invertebrate and fish taxa decreased in areas with persistent sediment deposition; however, bivalve densities increased where mud deposited over sand, and flatfish and Pacific sand lance densities increased where sand deposited over gravel. In areas without sediment deposition, most invertebrate and fish taxa were unaffected by increased suspended sediment or the loss of algae cover associated with it; however, densities of tubeworms and flatfish, and primary cover of sessile invertebrates increased suggesting benefits of increased particulate matter or relaxed competition with macroalgae for space. As dam removal neared completion, we saw evidence of macroalgal recovery that likely owed to water column clearing, indicating that long-term recovery from dam removal effects may be starting. Our results are relevant to future dam removal projects in coastal areas and more generally to understanding effects of increased sedimentation on nearshore subtidal benthic communities.

Washington↗

USGS2017

Coastal habitat and biological community response to dam removal on the Elwha River

Habitat diversity and heterogeneity play a fundamental role in structuring ecological communities. Dam emplacement and removal can fundamentally alter habitat characteristics, which in turn can affect associated biological communities. Beginning in the early 1900s, the Elwha and Glines Canyon dams in Washington, USA, withheld an estimated 30 million tonnes of sediment from river, coastal, and nearshore habitats. During the staged removal of these dams—the largest dam removal project in history—over 14 million tonnes of sediment were released from the former reservoirs. Our interdisciplinary study in coastal habitats—the first of its kind—shows how the physical changes to the river delta and estuary habitats during dam removal were linked to responses in biological communities. Sediment released during dam removal resulted in over a meter of sedimentation in the estuary and over 400 m of expansion of the river mouth delta landform. These changes increased the amount of supratidal and intertidal habitat, but also reduced the influx of seawater into the pre-removal estuary complex. The effects of these geomorphic and hydrologic changes cascaded to biological systems, reducing the abundance of macroinvertebrates and fish in the estuary and shifting community composition from brackish to freshwater-dominated species. Vegetation did not significantly change on the delta, but pioneer vegetation increased during dam removal, coinciding with the addition of newly available habitat. Understanding how coastal habitats respond to large-scale human stressors—and in some cases the removal of those stressors—is increasingly important as human uses and restoration activities increase in these habitats.

Washington↗

USGS2017

Ephemeral seafloor sedimentation during dam removal: Elwha River, Washington

The removal of the Elwha and Glines Canyon dams from the Elwha River in Washington, USA, resulted in the erosion and transport of over 10 million m 3 of sediment from the former reservoirs and into the river during the first two years of the dam removal process. Approximately 90% of this sediment was transported through the Elwha River and to the coast at the Strait of Juan de Fuca. To evaluate the benthic dynamics of increased sediment loading to the nearshore , we deployed a tripod system in ten meters of water to the east of the Elwha River mouth that included a profiling current meter and a camera system. With these data, we were able to document the frequency and duration of sedimentation and turbidity events, and correlate these events to physical oceanographic and river conditions. We found that seafloor sedimentation occurred regularly during the heaviest sediment loading from the river, but that this sedimentation was ephemeral and exhibited regular cycles of deposition and erosion caused by the strong tidal currents in the region. Understanding the frequency and duration of short-term sediment disturbance events is instrumental to interpreting the ecosystem-wide changes that are occurring in the nearshore habitats around the Elwha River delta.

Washington↗

USGS2017

Coastal river plumes: Collisions and coalescence

Plumes of buoyant river water spread in the ocean from river mouths, and these plumes influence water quality, sediment dispersal, primary productivity, and circulation along the world’s coasts. Most investigations of river plumes have focused on large rivers in a coastal region, for which the physical spreading of the plume is assumed to be independent from the influence of other buoyant plumes. Here we provide new understanding of the spreading patterns of multiple plumes interacting along simplified coastal settings by investigating: (i) the relative likelihood of plume-to-plume interactions at different settings using geophysical scaling, (ii) the diversity of plume frontal collision types and the effects of these collisions on spreading patterns of plume waters using a two-dimensional hydrodynamic model, and (iii) the fundamental differences in plume spreading patterns between coasts with single and multiple rivers using a three-dimensional hydrodynamic model. Geophysical scaling suggests that coastal margins with numerous small rivers (watershed areas < 10,000 km 2 ), such as found along most active geologic coastal margins, were much more likely to have river plumes that collide and interact than coastal settings with large rivers (watershed areas > 100,000 km 2 ). When two plume fronts meet, several types of collision attributes were found, including refection, subduction and occlusion. We found that the relative differences in pre-collision plume densities and thicknesses strongly influenced the resulting collision types. The three-dimensional spreading of buoyant plumes was found to be influenced by the presence of additional rivers for all modeled scenarios, including those with and without Coriolis and wind. Combined, these results suggest that plume-to-plume interactions are common phenomena for coastal regions offshore of the world’s smaller rivers and for coastal settings with multiple river mouths in close proximity, and that the spreading and fate of river waters in these settings will be strongly influenced by these interactions. We conclude that new investigations are needed to characterize how plumes interact offshore of river mouths to better understand the transport and fate of terrestrial sources of pollution, nutrients and other materials in the ocean.

Progress in Oceanography↗

USGS2017

New techniques to measure cliff change from historical oblique aerial photographs and structure-from-motion photogrammetry

Oblique aerial photograph surveys are commonly used to document coastal landscapes. Here it is shown that adequate overlap may exist in these photographic records to develop topographic models with Structure-from-Motion (SfM) photogrammetric techniques. Using photographs of Fort Funston, California, from the California Coastal Records Project, imagery were combined with ground control points in a four-dimensional analysis that produced topographic point clouds of the study area’s cliffs for 5 years spanning 2002 to 2010. Uncertainty was assessed by comparing point clouds with airborne LIDAR data, and these uncertainties were related to the number and spatial distribution of ground control points used in the SfM analyses. With six or more ground control points, the root mean squared errors between the SfM and LIDAR data were less than 0.30 m (minimum 1⁄4 0.18 m), and the mean systematic error was less than 0.10 m. The SfM results had several benefits over traditional airborne LIDAR in that they included point coverage on vertical- to-overhanging sections of the cliff and resulted in 10–100 times greater point densities. Time series of the SfM results revealed topographic changes, including landslides, rock falls, and the erosion of landslide talus along the Fort Funston beach. Thus, it was concluded that SfM photogrammetric techniques with historical oblique photographs allow for the extraction of useful quantitative information for mapping coastal topography and measuring coastal change. The new techniques presented here are likely applicable to many photograph collections and problems in the earth sciences.

Journal of Coastal Research↗

USGS2016

Community for Data Integration 2015 annual report

The Community for Data Integration (CDI) continued to experience success in fiscal year 2015. The CDI community members have been sharing, learning, and collaborating through monthly forums, workshops, working groups, and funded projects. In fiscal year 2015, CDI coordinated 10 monthly forums with 16 different speakers from the U.S. Geological Survey and external partners; funded 11 collaborative projects; and hosted an in-person, four-day workshop, which attracted 168 (134 in-person and 34 remote) data practitioners, data providers, and data consumers from across the USGS, academia, industry, and other government agencies. The Citizen Science, Connected Devices, Data Management, Semantic Web, and Tech Stack Working Groups continued to accomplish great things in fiscal year 2015. These working groups were major stakeholders in planning the 2015 CDI Workshop; they continued developing solutions to pressing challenges, and they brought in speakers throughout the year for more focused presentations and discussions. Additionally, a new working group formed during the 2015 CDI Workshop—the Earth-Science Themes Working Group.

Open-File Report↗

USGS2016

Dam Removal Information Portal (DRIP)—A map-based resource linking scientific studies and associated geospatial information about dam removals

The removal of dams has recently increased over historical levels due to aging infrastructure, changing societal needs, and modern safety standards rendering some dams obsolete. Where possibilities for river restoration, or improved safety, exceed the benefits of retaining a dam, removal is more often being considered as a viable option. Yet, as this is a relatively new development in the history of river management, science is just beginning to guide our understanding of the physical and ecological implications of dam removal. Ultimately, the “lessons learned” from previous scientific studies on the outcomes dam removal could inform future scientific understanding of ecosystem outcomes, as well as aid in decision-making by stakeholders. We created a database visualization tool, the Dam Removal Information Portal (DRIP), to display map-based, interactive information about the scientific studies associated with dam removals. Serving both as a bibliographic source as well as a link to other existing databases like the National Hydrography Dataset, the derived National Dam Removal Science Database serves as the foundation for a Web-based application that synthesizes the existing scientific studies associated with dam removals. Thus, using the DRIP application, users can explore information about completed dam removal projects (for example, their location, height, and date removed), as well as discover sources and details of associated of scientific studies. As such, DRIP is intended to be a dynamic collection of scientific information related to dams that have been removed in the United States and elsewhere. This report describes the architecture and concepts of this “metaknowledge” database and the DRIP visualization tool.

Open-File Report↗

USGS2016

Highstand shelf fans: The role of buoyancy reversal in the deposition of a new type of shelf sand body

Although sea-level highstands are typically associated with sediment-starved continental shelves, high sea level does not hinder major river floods. Turbidity currents generated by plunging of sediment-laden rivers at the fluvial-marine interface, known as hyperpycnal flows, allow for cross-shelf transport of suspended sand beyond the coastline. Hyperpycnal flows in southern California have deposited six subaqueous fans on the shelf of the northern Santa Barbara Channel in the Holocene. Using eight cores and nine grab samples, we describe the deposits, age, and stratigraphic architecture of two fans in the Santa Barbara Channel. Fan lobes have up to 3 m of relief and are composed of multiple hyperpycnite beds &sim;5 cm to 40 cm thick. Deposit architecture and geometry suggest the hyperpycnal flows became positively buoyant and lifted off the seabed, resulting in well-sorted, structureless, elongate sand lobes. Contrary to conventional sequence stratigraphic models, the presence of these features on the continental shelf suggests that active-margin shelves may locally develop high-quality reservoir sand bodies during sea-level highstands, and that such shelves need not be solely the site of sediment bypass. These deposits may provide a Quaternary analogue to many well-sorted sand bodies in the rock record that are interpreted as turbidites but lack typical Bouma-type features.

Geological Society of America Bulletin↗