Geology topics

Erin E. Marsh

Publications and source records attributed to Erin E. Marsh.

At least 19 recordsLinked to original sources

USGS2025

Geochemistry of quartz and fluid inclusions associated with gold, tungsten, and antimony in the Stibnite-Yellow Pine district, Idaho

Deposits in the historic Stibnite-Yellow Pine district in east-central Idaho were mined for Ag, Au, Hg, Sb, and W. Ore is hosted in breccia and fault zones along NE-striking faults that transect the Atlanta lobe of the Late Cretaceous Idaho batholith and metamorphosed Neoproterozoic to lower Paleozoic rocks. Geochronological studies have delineated five superimposed and zoned hydrothermal events in the mining district which range in age from Late Cretaceous to the Eocene. They formed the following consecutive assemblages: (1) vein and disseminated pre-ore milky quartz (± calcite), muscovite, and brassy pyrite with minor molybdenite and base metal sulfides; (2) vein and disseminated quartz, calcite, sericite, auriferous-pyrite, and arsenopyrite; (3) potassium feldspar, quartz, dolomite, and calcite with vein and disseminated scheelite ± pyrite and arsenopyrite; (4) Au-Ag veins that contain adularia; and (5) breccia, vein, and disseminated quartz, calcite, and stibnite with minor Ag sulfosalts and distal zones of cinnabar and realgar at Fern and Hermes mines. In this study, the pressure, temperature, and composition of ore-forming fluids were measured in Au-, W-, and Sb-bearing samples collected from drill core and surface exposures. Using optical petrography, scanning electron microscopy cathodoluminescence (SEM-CL) and electron microprobe cathodoluminescence (EMPA-CL) imaging, as well as electron microprobe (EMP) and laser ablation-inductively coupled plasma-mass spectrometry trace element analyses, four major overprinting generations of hydrothermal quartz are defined. Fluid inclusion assemblages (FIAs) in each generation of quartz were characterized by microthermometry and laser Raman spectroscopy. Quartz and fluid inclusion paragenesis are as follows: (Qi) altered and overprinted Qi with no coeval FIAs that formed before or during event 1; (Q1) early veins as well as disseminated quartz with dull gray SEM-CL and H 2 O-NaCl-CO 2 FIAs that formed at minimum temperatures and pressures of 281° to 358°C and 1346 to 1789 bar during event 2 (Au); (Q2) vein and disseminated quartz, often euhedral, with H 2 O-NaCl ± CO 2 ± CH 4 FIAs that formed at minimum temperatures and pressures of 183° to 213°C and 72 to 602 bar during event 3 (W); and (Q3) euhedral and disseminated quartz with H 2 O-NaCl FIAs that formed at minimum temperature and pressures of 156° to 161°C and 5 to 6 bar during event 5 (Sb). Stibnite hosts H 2 O-NaCl FIAs trapped at minimum temperatures and pressures of 150° to 189°C and 5 to 12 bar that are similar to those of Q3-hosted FIAs. The quartz paragenetic history in the district follows a progressive temporal path from Tienriched quartz deposited by a relatively deep and higher temperature aqueous-carbonic fluid to a Li, Al, and Sb enriched quartz precipitated from a lower temperature aqueous fluid. Gases in fluid inclusion extracts from ore and gangue minerals were analyzed by mass spectrometry. Noble gas isotope analysis of fluid inclusion extracts revealed three signatures. Pre-ore Qi has R/R A (the isotopic ratio of the sample 3 He/ 4 He to atmospheric 3 He/ 4 He (1.384 × 10 −6 )) values that reflect the composition of the crustal melt-derived Atlanta lobe of the Idaho batholith. Quartz (Q1) and auriferous arsenian pyrite of hydrothermal event 2 have 20 Ne/ 4 He and R/R A values that plot along the air-crust mixing line, and these gases were likely introduced by metamorphic fluids derived from metasedimentary rocks. Stibnite with associated quartz (Q3 ± Q2) have 20 Ne/ 4 He and R/R A values that extend from the air-crust mixing line to the air-mantle mixing line, showing a shift from a crustal signature to an overprinting mantle signature. Late calcite has 20 Ne/ 4 He and R/R A values that extend from air toward the mantle end member, which suggests that magmatic volatiles condensed into meteoric groundwater late in the paragenesis. A mantle volatile source is also supported by high 20 Ne/ 22 Ne ratios. The Stibnite-Yellow Pine district is similar to other Au-W-Sb districts around the world in ore fluid chemistries, with late-stage stibnite being a product of cooling. The fluid pressure-temperature-composition (P-T-X) estimates and the crustal source of He during hydrothermal event 2 gold mineralization are characteristic of orogenic Au deposits, and the observed inclusion reequilibration textures indicate that trapped fluid inclusions were deformed during transitions between the brittle-ductile environment. Scheelite was deposited during event 3 with Q2 quartz and is overgrown by Q3 quartz and stibnite. Our interpretation of the quartz texture, chemistry, and fluid inclusion P-T-X data suggest that Au, W, and Sb mineralization occurred as hydrothermal fluids evolved from H 2 O-NaCl-CO 2 at >300°C and depths of ~4 to 6 km near the ductile to brittle transition to H 2 O-NaCl at ~150°C and epithermal depths as the Idaho batholith was exhumed. Geochronology indicates that from the Late Cretaceous to early Eocene, overprinting hydrothermal events formed deep orogenic Au, intermediate W, and shallow epithermal Au-Ag and Sb. Without comprehensive geochronologic constraints, our fluid inclusion data and textural observations could be interpreted as a single evolving hydrothermal system, as has been done in many other mining districts with similar mineralization.

Idaho↗

USGS2025

Fluid evolution and timing of the Stibnite-Yellow Pine district, Idaho

Gold, antimony, and tungsten resources of the Stibnite-Yellow Pine district, Idaho, are hosted in complexly faulted Late Cretaceous Atlanta Lobe of the Idaho batholith and surrounding Neoproterozoic-Paleozoic metamorphic rocks. This study utilizes detailed petrography and trace element chemistry of quartz to establish relative timing relationships between successive ore forming events and provide textural constraints for the interpretation of geochronologic data. Textures are discussed in the context of fluid inclusion populations that provide evidence into the P-T-X evolution of the hydrothermal system. Results reveal that the deposits contain multiple overprinting generations of hydrothermal quartz, each with distinct cathodoluminescence (CL) signature, trace element chemistry, and fluid inclusion populations. Quartz textures record a complex history of recrystallization, dissolution, and successive overgrowth as fluids evolved towards lower temperatures and CO2 contents. Quartz associated with the main stage of Au deposition contains relatively high concentrations of Ti, with low concentrations of all other elements measured. Later quartz generations are depleted in Ti, but show elevated Al concentrations, with significant concentrations of Sb measured in quartz associated with stibnite. Textural and geochemical evidence suggests that the system evolved from deeper mesozonal Au-W deposition towards more shallow epizonal Sb-(Ag) deposition during a period of rapid uplift.

Idaho↗

USGS2025

Geology and geochemistry of Ni-Co laterite occurrences of northern California and southern Oregon

Ni-Co laterite occurrences in the Klamath Mountains of southern Oregon and northern California contain Ni, Co, and Sc values comparable to global deposits. However, they are thin and limited in extent, often occurring as landslides and slumps. Olivine in the parent material contains Ni and Co and enstatite contains Sc. Through pervasive weathering, these elements where concentrated in Fe- and Mn-oxides. Unlike the mined Nickel Mountian deposit near Riddle, Oregon, these occurrences have no hydrous-Mg silicate minerals. Although the region experienced pervasive weathering in the Eocene, preservation of the laterite profiles was limited in the Klamath Mountains due to accelerated uplift and erosion compared to the Coast Range Provence.

Conference Paper↗

USGS2023

Reconnaissance mineral and cathodoluminescence studies of gold occurrences in the Pogo-Black Mountain area, eastern interior Alaska, USA

The Pogo Au deposit is the largest of a number of gold occurrences in eastern interior Alaska, that occur along a broad trend from west of Pogo to Black Mountain. Some of these occurrences are hosted in amphibolite facies gneisses and others in mid-Cretaceous igneous rocks that intruded the older metamorphic rocks. All occurrences contain arsenopyrite and pyrite. Whole rock geochemical trends distinguish most metamorphic rock-hosted vein prospects (strong Bi-Te-Au correlations) and intrusion-hosted occurrences (weak As-Au correlations). Brecciated quartz veins in metamorphic rocks have paragentically late Bi-Te (±S) + Au that post-dates Fe-As sulphide deposition. High grade vein samples from the Tibbs Creek intrusion-hosted deposits contain pyrite and arsenopyrite, generally lack Bi-Te minerals, but can contain paragentically younger euhedral quartz, stibnite and carbonate. Cathodoluminescence studies of gold-rich samples indicate that quartz dissolution occurred during the syn- to post-tectonic Bi-Te-Au deposition, and the later stibnite event. In the case of metamorphic rock-hosted deposits (e.g., Pogo, Gray Lead), Bi-Te and gold deposition commonly occurs in microfractures within quartz veins; the limited quartz in these fractures have distinctive CL response. We propose that gold deposition is related to changes in P-T conditions rather than fluid-rock chemical reactions. Similar quartz dissolution textures affect the void-filling euhedral quartz before or during stibnite and carbonate mineralization in the high-grade Au samples from Blue Lead.

Alaska↗

USGS2022

Fluids and melts at the magmatic-hydrothermal transition, recorded by unidirectional solidification textures at Saginaw Hill, Arizona, USA

Fluid exsolution and melt evolution at the magmatic-hydrothermal transition are critical processes driving the metal enrichment of porphyry systems. Coeval fluid and melt inclusion assemblages in unidirectional solidification textures (USTs) at Saginaw Hill—a small, porphyry Cu system in southwestern Arizona—record a dynamic and repetitious process of fluid accumulation and release. The cores of quartz crystals throughout the UST bands host coeval silicate melt and brine inclusions but lack vapor-rich inclusions. This could indicate preferential expulsion of vapor and trapping of high-density brine during episodes of fracturing or the direct exsolution of single-phase high-salinity brine from the silicate melt. In contrast, the rims of UST quartz host abundant coeval brine and vapor inclusions, consistent with liquid-vapor immiscibility at lower pressures compared to the corresponding quartz cores. This transition from dominantly coeval silicate melt inclusions and brine in phenocryst cores to coeval brine and vapor in the rims suggests that the Saginaw Hill system underwent cyclic processes of fluid exsolution, accumulation, overpressure, and decompression at relatively stable temperatures (consistently ~650°C) during UST formation. Melt inclusion data indicate that the melt at this stage was highly fractionated and tended toward muscovite saturation. Metal concentrations in the brine were comparable to or higher than those in fluids reported in world-class porphyry Cu systems and were likely the result of both igneous fractionation and the high chloride content of the exsolved fluids. While limited in scale, Saginaw Hill provides evidence for processes that are predicted to occur at the magmatic-hydrothermal transition during the formation of large, well-mineralized porphyry systems.

Arizona↗

USGS2022

Tungsten skarn potential of the Yukon-Tanana Upland, eastern Alaska, USA—A mineral resource assessment

Tungsten (W) is used in a variety of industrial and technological applications and has been identified as a critical mineral for the United States, India, the European Union, and other countries. These countries rely on W imports mostly from China, which leaves them vulnerable to supply disruption. Consequently, the U.S. government has a current initiative to understand domestic resource potential. The eastern Alaska portion of the Yukon-Tanana Upland (YTU), is prospective for W skarn deposits, the major source of global W supply. The regional geology consists of juxtaposed Paleozoic lithotectonic packages that were reaccreted to North America in the Mesozoic . Multiple subsequent episodes of arc-related magmatism intruded the lithotectonic packages, accompanied by W skarn formation mostly associated with 100–90 Ma intrusions; major W skarn deposits in Canada are part of the same metallogenic event (e.g., Mactung, Cantung). In this paper, we present an assessment for undiscovered W skarn resources for parts of the lesser-explored western (Alaskan) portion of the YTU. We used GIS proximity analysis to map the intersection of pluton and carbonate-bearing rocks to define three permissive tracts for W skarn deposits. The permissive tracts were qualitatively assessed by mineral potential mapping using region-wide sediment geochemistry and mineral concentrate datasets. This analysis showed that much of the western YTU has high potential for undiscovered W skarn deposits, whereas the eastern and southern YTU had only isolated areas of medium to high potential. Historical production and the quality of the geochemistry data of the western YTU tract (ca. 9200 km 2 ) permitted a quantitative assessment of undiscovered W resources. Probabilistic estimates by a panel of 20 experts predicted a 70% chance of one to three undiscovered W skarn deposits in the western YTU tract. The rationale for favorability employed by the expert panel included favorable lithology, previous production, clustering of previously mined deposits, W placers in the area, lack of recent exploration, pan concentrates containing W minerals, and W geochemical anomalies. Estimates were combined with a global grade and tonnage model for W skarns in a Monte Carlo simulation and provided a median estimate of undiscovered resources of 94 kt WO 3 . If the undiscovered W skarn deposits are located close to infrastructure (e.g., near Fairbanks, or close to roads and/or power grid), application of an economic filter indicates that the median total economically recoverable WO 3 is 63 kt with a net present value (NPV) of $330 million USD (2008 dollars). Whereas if deposits are far from infrastructure, median recoverable WO 3 is only 30 kt and the NPV is $44 million. Our models for contained WO 3 resources and NPV estimates for the western YTU tract are considerably lower than the known resources in skarns in adjacent areas in Canada. Estimates for the western YTU are also lower than preliminary estimates for undiscovered W skarn deposits in areas of the western conterminous United States. We speculate that lower permeability and continuity of favorable carbonate rock horizons in the relatively higher-grade metamorphic country rocks in the Alaska portion of the YTU may explain some of the differences in prospectivity. More detailed geologic mapping, modern geochemistry, and geophysical surveys are needed to refine the resource potential of the whole YTU. Regardless, quantitative mineral resource assessment provides a useful tool for making first-order regional estimates of undiscovered resources, identifying target areas for new data acquisition, and guiding research on the fundamental controls of district-scale metallogenic endowments.

Alaska↗

USGS2022

Late Jurassic-Early Cretaceous orogenic gold mineralization in the Klamath Mountains, California: Constraints from 40Ar/39Ar dating of hydrothermal muscovite

The Klamath Mountains gold province is the second most important historical producer in California, having produced more than 7 Moz of gold from both lode and placer sources. Hydrothermal muscovite grains from gold-bearing veins provide the first 40 Ar/ 39 Ar age constraints indicative of a protracted period of mineralization in the Klamath Mountains. The data indicate that the window for orogenic gold mineralization in the Klamath Mountains was from ∼160–140 Ma, coinciding in age with the oldest orogenic gold deposits in the Sierra Nevada foothills province to the south, although mineralization continued in the latter along the Mother Lode belt for another 20–30 million years. Despite the broad age overlap between hydrothermal activity and magmatism, the former relates to a regional thermal event, and there is no genetic link between the two. Instead, a correlation exists between the timing of lode gold formation and discrete tectonic events, changes in stress regime, and fault movement. The maximum age corresponds to a major plate reorganization in the Pacific basin and initial gold mineralization continuing into the Sierra Nevada foothills gold province to the south. The minimum age corresponds to the westerly lateral offset of the Klamath Mountains from the Sierra Nevada and the then-active arc, marking the termination of both magmatism and gold-producing hydrothermal activity in the Klamath Mountains. Lode gold mineralization in the Klamath Mountains is compatible with a crustal source of metals and fluids that were released during metamorphic devolatilization and focused via hydrothermal fluid flow along regional faults.

California↗

USGS2022

Early Neoproterozoic gold deposits of the Alto Guaporé province, southwestern Amazon craton, western Brazil

The Alto Guaporé gold province, southwestern Amazon craton, contains gold deposits that have been mined since the beginning of the 18th century and these deposits, together, have modern-day, pre-mining gold resources of at least 1.8 Moz. The ore is associated with quartz vein systems along the southeastern part of the Aguapei belt, a ~35-km-wide and ~500-km-long, NNW-trending shear zone formed due to reactivation of a terrane-bounding suture. The Aguapei belt evolved by ca. 1150 to 1100 Ma rifting and deposition of siliciclastic sediments in an aulacogen basin, followed by deformation and low-grade metamorphism of the sedimentary sequences during 1100 to 900 Ma terrane collision along the craton margin. The deformation was characterized by a compressional regime until ca. 950 Ma and transition to a transpressional setting during the final 50 m.y. The gold deposits are hosted in a variety of structures that are second-order to the main Aguapei shear zone. The Ernesto and Pau-a-Pique deposits are located ~40 km apart and at jogs along the Aguapei belt. They are marginal to pre-ore igneous rocks, with Ernesto hosted in the basal part of the metasedimentary Fortuna Formation that overlies tonalite and Pau-a-Pique at the contact between metasedimentary rocks and diorite. Three deformational phases comprise the compressional (D 1 to D 2 ) to transpressional (D 3 ) tectonic events. In the Pau-a-Pique deposit and the deeper level of the Ernesto deposit, the ore-bearing veins are bedding parallel and follow D 2 strike-slip and reverse fault zones, respectively. However, the veins formed during D 3 reactivation of the older structures by an array of oblique accommodation faults. In contrast, ores at shallower levels of Ernesto, both in discordant and bedding-parallel veins, are hosted within a ~20-m-thick rigid metaconglomerate with associated dilation due to the structural complexity as sedimentary rocks of the Aguapei Group were folded around the dome-shaped roof of the pre-ore tonalite. The ores in both deposits, as well as in many other deposits of the province, are characterized by disseminated and vein-hosted pyrite. Gold occurs mainly as inclusions in the pyrite, with other hydrothermal phases comprising muscovite, Fe-Ti oxides, and minor apatite, chalcopyrite, and galena. Fluid inclusion data, coupled with stable isotope geochemistry and geothermometry, indicate that gold precipitated from a low-salinity, CO 2 -rich fluid at ~300°C and ~2.5 kbar. The source for the fluid and gold was the interbedded pelites during devolatilization of the Aguapei Group sequence. The aqueous-carbonic fluid inclusions and the narrow range of δ 18 O values of quartz (12 ± 1 ‰ ) from many auriferous veins from the central part of the province represent a regional ore-forming fluid. The broad range of δ D for hydrous minerals (–116 to –55 ‰ ) reflects influx of small amounts of meteoric water into the steeply dipping shear zones during postgold exhumation. The 40 Ar/ 39 Ar geochronology from hydrothermal muscovite indicates a widespread hydrothermal event along the belt between 928 and 920 Ma. Collectively, the geological, geochronological, and geochemical data suggest that metamorphic fluids migrated laterally into and then upward along the Aguapei belt and deposited gold in lower-order structures where strain gradients existed between lithounits. The province has many characteristics of large orogenic gold provinces worldwide and represents a highly prospective and underexplored target region for early Neoproterozoic gold, a time period that generally is not well endowed in gold ores.

Alto Guaporé gold province, Amazon craton↗

USGS2022

Trace elements in quartz: Insights into source and fluid evolution in magmatic-hydrothermal systems

Quartz trace elements record information about fluid evolution as well as metal migration and precipitation. Here, we summarize most of the reported (including this study) quartz trace element data ( N = ~4,600) generated by laser ablation-inductively coupled plasma-mass spectrometry (LA-ICP-MS) on various textural types and paragenetic stages of quartz in I-type porphyry-epithermal (Cu-Mo-Au-Ag-Te) and S- and A-type granitegreisen (Sn-W and rare metal) systems in the world. The results show that Li versus Al diagrams, combined with Ti-Ge-As-Sb contents, can be used to decipher the source and evolution of fluids in magmatic-hydrothermal systems. In I-type porphyry-epithermal systems, magmatic quartz has low Li/Al ratios from 0.001 to 0.173 ( N = 483) with a mean of 0.039 ± 0.032. Hydrothermal quartz has progressively higher Li and Al concentrations that are dominated by cooling along fluid pathways. Quartz evolves from Ti rich to Ge rich from early to late stages in porphyry hydrothermal veins and is As and Sb rich in epithermal veins. In S- and A-type granite-greisen systems, magmatic quartz has high Li/Al ratios from 0.007 to 0.502 ( N = 604) with a mean of 0.130 ± 0.063 and from 0.009 to 0.327 ( N = 325) with a mean of 0.126 ± 0.065, respectively. Hydrothermal quartz has progressively lower Li and Al concentrations that are dominated by fluid-rock reactions and cooling along fluid pathways. Quartz evolves with decreasing Ti concentrations from magmatic to hydrothermal stages. Ge is abundant in pegmatite quartz in S-type systems. Variations in pH or precipitation rate along fluid pathways have a small influence on Li/Al ratios. The variation of quartz trace elements with elevation in individual systems suggests that they can be used as a vector to guide exploration in magmatic-hydrothermal systems.

Economic Geology↗

USGS2020

A fundamental role of carbonate–sulfate melts in the formation of iron oxide–apatite deposits

Genetic models for iron oxide–apatite deposits are controversial and span a spectrum from orthomagmatic to hydrothermal endmembers. This lack of consensus is rooted in uncertainties as to the nature and origin of ore-forming fluids in these systems. Here, we present a fluid-inclusion study of mineralizing fluids at two iron oxide–apatite deposits (Buena Vista, Nevada and Iron Springs, Utah). We found that the inclusions in both systems comprise both aqueous brine and ubiquitous iron-rich carbonate–sulfate melts. These melts were found throughout the paragenesis of both deposits and show a tremendous capacity to transport ferric iron. Hence, we argue that orthomagmatic fluids played a role in mineralization at both Buena Vista and Iron Springs, and that the main ore-forming fluid was an iron-rich carbonate–sulfate melt formed by the assimilation and anatexis of evaporite-bearing carbonate rocks. The geological conditions that give rise to carbonate–sulfate melts are also a common feature of other classic iron oxide–apatite systems worldwide. Hence, we argue that the process of assimilation, anatexis and immiscibility of carbonate–sulfate melts is fundamental to iron oxide–apatite formation and provides a common link between iron oxide–apatite systems in different geological settings.

Nature Geoscience↗

USGS2019

Geochemistry of hematite veins in IOA-IOCG deposits of SE Missouri, USA: Relation to felsic magmatism and caldera lakes

The paragenesis, textures, and chemical compositions of secondary hematite in regional potassic altered rhyolites, four IOA deposits, the sedimentary iron deposit at Pilot Knob and the Boss IOCG deposit in SE Missouri were determined and compared to primary magnetite from the IOA and IOCG deposits. Magnetite is composed of elements characteristics of mafic to intermediate intrusions whereas hematite is enriched in elements characteristic of felsic igneous rocks. These results suggest that magnetite formed from fluids discharged from mafic to intermediate composition intrusions. Hematite precipitated from fluids discharged from felsic intrusions or fluids that evolved in caldera lakes. Hematite in the sedimentary iron deposit at Pilot Knob formed in an evaporative caldera lake with fluid inputs from felsic intrusions.

Missouri↗

USGS2019

Absence of magnetite microlites, geochemistry of magnetite veins and replacements in IOA deposits, SE Missouri, USA: Relations to intermediate intrusions

The paragenesis, textures, and chemical compositions of magnetite in two mafic to intermediate intrusions and four IOA deposits in SE Missouri were studied to discriminate between igneous and hydrothermal sources. In this study, we found that replacement magnetite with mineral inclusion-rich cores yields erroneously high Ti, Al, Si, Mg, and Mn contents as determined by EMP and LA-ICP-MS due to rutile and silicate inclusions. Thus, identification of high-Ti microlites on the basis of inclusion-rich cores with high Ti contents is an analytical artefact. Since the high-Ti magnetite microlite flotation model is critically dependent on this type of analysis, it may be invalid. The presence of coarse-grained high-Ti vein magnetite with ilmenite lamellae enveloped by replacement magnetite with inclusion-rich cores in ore zones suggests that the veins were high-temperature conduits for low-temperature replacement ores. The trace element compositions of vein and replacement magnetite suggest that iron was sourced from mafic to intermediate intrusions. These results support a magmatic-hydrothermal origin for IOA systems in SE Missouri.

Missouri↗

USGS2016

Mineral thermometry and fluid inclusion studies of the Pea Ridge iron oxide-apatite–rare earth element deposit, Mesoproterozoic St. Francois Mountains Terrane, southeast Missouri, USA

Mineral thermometry and fluid inclusion studies were conducted on variably altered and mineralized samples from the Mesoproterozoic Pea Ridge iron oxide-apatite (IOA)-rare earth element (REE) deposit in order to constrain P-T conditions, fluid chemistry, and the source of salt and volatiles during early magnetite and later REE mineralization. Scanning electron microscopy (SEM)-cathodoluminescence and SEM-backscatter electron images show that quartz and rutile precipitated before, during, and after magnetite and REE mineral growth. Ti-in-quartz and Zr-in-rutile equilibration temperatures range from ≤350° to 750°C in the amphibole, magnetite, hematite, and silicified zones where T increased during magnetite and quartz growth and dropped precipitously after fracturing and brecciation. Late drusy quartz cements within a REE-rich breccia pipe record the lowest T (≤315°–400°C). Liquid-, vapor-rich, and hypersaline (±hematite, calcite) fluid inclusions are common and liquid CO 2 is present locally. Salinities define three populations: saline (10–27 wt % NaCl equiv), hypersaline (34–>60 wt % NaCl equiv), and dilute (0–10 wt % NaCl equiv ). The wide range of eutectic melting temperatures (−67° to −19°C) suggests that saline inclusions trapped variable proportions of a CaCl-MgCl-FeCl-bearing fluid end member and an NaCl-KCl fluid end member. Homogenization temperatures and pressures of these saline inclusions suggest they were trapped when fluids unmixed into brine and vapor at T <350°C, P <15 MPa, and a depth of ~1.5 km. Hypersaline inclusions were trapped at low T and P (~200°C and ~1 MPa) along the V + L + H curve when the system vented to the paleosurface. Data for dilute inclusions in late drusy quartz from the REE-rich breccia pipe are indicative of a boiling epithermal environment. The Na/Cl, Na/K, and Cl/Br ratios of fluid inclusion extracts provide evidence for mixtures of magmatic hydrothermal fluids and evaporated seawater. Extracts from magnetite, hematite, and pyrite plot in the magmatic-hydrothermal field, indicating that Fe was derived from a magmatic source. Their enrichments in Mg and Ca are consistent with a mafic magmatic source. The positive correlation between Na/Mg and Na/Ca ratios may be due to halite saturation or albitization of igneous rocks. Extracts from barite in the REE-rich breccia pipes are enriched in Na and Br and plot near the seawater evaporation trend. He is highly enriched relative to Ne and Ar in fluid inclusion extracts, which precludes air as a source of He. Although the He is mostly of crustal origin, pyrite with a 3 He/ 4 He (R/R A ) of 0.1 contains up to 12% mantle He. Many extracts have low 20 Ne/ 22 Ne ratios due to nucleogenic production of 22 Ne in high F/O minerals such as fluorapatite or F biotite. The arrays of data for 3 He/ 4 He (R/R A ) and 22 Ne/ 20 Ne suggest that volatiles were derived from two sources, a moderate F mafic magma containing mantle He and a high F silicic magma with crustal He. Together with other evidence cited in this report, these data (1) support a magmatic hydrothermal origin for the Mesoproterozoic magnetite-apatite deposit with ore fluids derived from a concealed mafic to intermediate-composition intrusion, (2) suggest that the REE minerals in breccia pipes were either derived from apatite or precipitated in response to decompression and cooling during breccia pipe formation, (3) provide evidence for the influx of basinal brine, magmatic fluids from granitic intrusions, and meteoric water after breccia pipe formation, and (4) show that Pea Ridge was relatively unaffected by the late Paleozoic Mississippi Valley-type (MVT) Pb-Zn system in overlying Cambrian sedimentary rocks.

Missouri↗

USGS2016

A salt diapir-related Mississippi Valley-type deposit: The Bou Jaber Pb-Zn-Ba-F deposit, Tunisia: Fluid inclusion and isotope study

The Bou Jaber Ba-F-Pb-Zn deposit is located at the edge of the Bou Jaber Triassic salt diapir in the Tunisia Salt Diapir Province. The ores are unconformity and fault-controlled and occur as subvertical column-shaped bodies developed in dissolution-collapse breccias and in cavities within the Late Aptian platform carbonate rocks, which are covered unconformably by impermeable shales and marls of the Fahdene Formation (Late Albian–Cenomanian age). The host rock is hydrothermally altered to ankerite proximal to and within the ore bodies. Quartz, as fine-grained bipyramidal crystals, formed during hydrothermal alteration of the host rocks. The ore mineral assemblage is composed of barite, fluorite, sphalerite, and galena in decreasing abundance. The ore zones outline distinct depositional events: sphalerite-galena, barite-ankerite, and fluorite. Fluid inclusions, commonly oil-rich, have distinct fluid salinities and homogenization temperatures for each of these events: sphalerite-galena (17 to 24 wt% NaCl eq., and Th from 112 to 136 °C); ankerite-barite (11 to 17 wt% NaCl eq., and Th from 100 to 130 °C); fluorite (19 to 21 wt% NaCl eq., Th from 140 to 165 °C). The mean temperature of the ore fluids decreased from sphalerite (125 °C) to barite (115 °C) and increased during fluorite deposition (152 °C); then decreased to &sim;110 °C during late calcite precipitation. Laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) analyses of fluid inclusions in fluorite are metal rich (hundreds to thousands ppm Pb, Zn, Cu, Fe) but the inclusions in barite are deficient in Pb, Zn, Cu, Fe. Inclusions in fluorite have Cl/Br and Na/Br ratios of several thousand, consistent with dissolution of halite while the inclusions analysed in barite have values lower than seawater which are indicative of a Br-enriched brine derived from evaporation plus a component of halite dissolution. The salinity of the barite-hosted fluid inclusions is less than obtained simply by the evaporation of seawater to halite saturation and requires a dilution of more than two times by meteoric water. The higher K/Na values in fluid inclusions from barite suggest that the brines interacted with K-rich rocks in the basement or siliciclastic sediments in the basin. Carbonate gangue minerals (ankerite and calcite) have δ 13 C and δ 18 O values that are close to the carbonate host rock and indicate fluid equilibrium between carbonate host rocks and hydrothermal brines. The δ 34 S values for sphalerite and galena fall within a narrow range (1 to 10 &permil;) with a bulk value of 7.5 &permil;, indicating a homogeneous source of sulfur. The δ 34 S values of barite are also relatively homogeneous (22 &permil;), with 6 &permil; higher than the δ 34 S of local and regional Triassic evaporites (15 &permil;). The latter are believed to be the source of sulfate. Temperature of deposition together with sulfur isotope data indicate that the reduced sulfur in sulfides was derived through thermochemical sulfate reduction of Triassic sulfate via hydrocarbons produced probably from Late Cretaceous source rocks. The 87 Sr/ 86 Sr ratio in the Bou Jaber barite (0.709821 to 0.711408) together with the lead isotope values of Bou Jaber galena ( 206 Pb/ 204 Pb = 18.699 to 18.737; 207 Pb/ 204 Pb = 15.635 to 15.708 and 208 Pb/ 204 Pb = 38.321 to 38.947) show that metals were extracted from homogeneous crustal source(s). The tectonic setting of the Bou Jaber ore deposit, the carbonate nature of the host rocks, the epigenetic style of the mineralization and the mineral associations, together with sulfur and oxygen isotope data and fluid inclusion data show that the Bou Jaber lead-zinc mineralization has the major characteristics of a salt diapir-related Mississippi Valley-type (MVT) deposit with superimposed events of fluorite and of barite deposition. Field relations are consistent with mineral deposition during the Eocene–Miocene Alpine orogeny from multiple hydrothermal events: (1) Zn-Pb sulfides formed by mixing of two fluids: one fluid metal-rich but reduced sulfur-poor and a second fluid reduced sulfur-rich; (2) barite precipitation involved the influx of a meteoric water component that mixed with a barium-rich fluid; and (3) fluorite precipitated from a highly saline fluid with higher temperatures.

Mineralium Deposita↗

USGS2016

Critical elements in sediment-hosted deposits (clastic-dominated Zn-Pb-Ag, Mississippi Valley-type Zn-Pb, sedimentary rock-hosted Stratiform Cu, and carbonate-hosted Polymetallic Deposits): A review: Chapter 12

Some sediment-hosted base metal deposits, specifically the clastic-dominated (CD) Zn-Pb deposits, carbonate-hosted Mississippi Valley-type (MVT) deposits, sedimentary-rock hosted stratiform copper deposits, and carbonate-hosted polymetallic (“Kipushi type”) deposits, are or have been important sources of critical elements including Co, Ga, Ge, and Re. The generally poor data concerning trace element concentrations in these types of sediment-hosted ores suggest that there may be economically important concentrations of critical elements yet to be recognized.

Book chapter↗

USGS2015

Mineral potential for nickel, copper, platinum group elements(PGE), and chromium deposits hosted in ultramafic rocks in the Islamic Republic of Mauritania (phase V, deliverable 67)

PRISM-I summary documents mention the presence of mafic-ultramafic igneous intrusive rocks in several areas of Mauritania and a number of chromium (Cr) and copper-nickel (Cu-Ni (±Co, Au)) occurrences associated with them. Permissive geologic settings generally include greenstone belts of any age, layered mafic-ultramafic and unlayered gabbro-anorthosite intrusive complexes in cratonic settings, ophiolite complexes, flood basalt provinces, and fluid-rich shear zones cutting accumulations of mafic-ultramafic rocks. Regions of Mauritania having these characteristics that are discussed in PRISM-I texts include the Mesoarchean greenstone belts of the TasiastTijirit terrane in the southwestern Rgueïbat Shield, two separate layered ultramafic complexes in the Amsaga Complex west of Atar, serpentinized metadunites in Mesoarchean rocks of the Rgueïbat Shield in the Zednes map sheet, several lateritized annular mafic-ultramafic complexes in the Paleoproterozoic northwestern portion of the Rgueïbat Shield, and the serpentinized ophiolitic segments of the Gorgol Noir Complex in the axial portion of the southern Mauritanides. Bureau de Recherches Géologiques et Minières (BRGM) work in the “Extreme Sud” zone also suggests that small copper occurrences associated with the extensive Jurassic microgabbroic intrusive rocks in the Taoudeni Basin of southeastern Mauritania could have potential for magmatic Cu-Ni (PGE, Co, Au) sulfide mineralization. Similarly, Jurassic mafic intrusive rocks in the northeastern Taoudeni Basin may be permissive. Known magmatic Cu-Ni deposits of these types in Mauritania are few in number and some uncertainty exists as to the nature of several of the more important ones.

Open-File Report↗

USGS2015

Mineral potential tracts for orogenic, Carlin-like, and epithermal gold deposits in the Islamic Republic of Mauritania, (phase V, deliverable 69)

The gold resources of Mauritania presently include two important deposits and a series of poorly studied prospects. The Tasiast belt of deposits, which came into production in 2007, is located in the southwestern corner of the Rgueïbat Shield and defines a world-class Paleoproterozoic(?) orogenic gold ore system. The producing Guelb Moghrein deposit occurs along a shear zone in Middle Archean rocks at the bend in the Northern Mauritanides and is most commonly stated to be an iron oxide-copper-gold (IOCG) type of deposit, although it also has some important characteristics of orogenic gold and skarn deposits. Both major deposits are surrounded by numerous prospects that show similar mineralization styles. The Guelb Moghrein deposit, and IOCG deposit types in general are discussed in greater detail in a companion report by Fernette (2015). In addition, many small gold prospects, which are probably orogenic gold occurrences and are suggested to be early Paleozoic in age, occur along the length of Southern Mauritanides. Existing data indicate the gold deposits and prospects in Mauritania have a sulfide assemblage most commonly dominated by pyrrhotite and chalcopyrite, and have ore-related fluids with apparently high salinities. A preliminary evaluation of these gold data can be used to develop broad, firstorder tracts defining favorable and permissive areas for gold resources; detailed metamorphic and structural maps are required for more detailed future tract definition. Such a first-order assessment can, nonetheless, broadly identify four tracts of gold resource potential. Three of these are favorable for discovery of new orogenic gold deposits. One tract, although not favorable, is nevertheless permissive for discovery of epithermal gold deposits. Tract 1 is defined by favorable medium metamorphic grade greenstone belts within vast areas of unfavorable high metamorphic grade, Mesoarchean and Paleoproterozoic granite-gneiss basement of the Rgueïbat Shield. Faults >200 km in length following the general strike of the greenstone belts; lineament intersections with both exposed and buried parts of greenstone belts within 500 m of the surface, as defined by aeromagnetic data (Finn and Anderson, 2015); and areas of banded iron formation (BIF) in the belts are particularly favorable areas for hosting gold resources in orogenic gold deposits within and along the margins of the greenstone belts. Tracts 2 and 3, also for orogenic gold, reflect the favorable Proterozoic-Cambrian metamorphic rocks of the Northern and Southern Mauritanides, with >200-km-long faults following the general strike of the range, and areas underlain by ultramafic and BIF rocks being particularly favorable. Outcrops of Triassic-Jurassic igneous rocks along the margins of the Taoudeni Basin define tract 4, which is permissive for epithermal gold deposits. Although extensive data are lacking for the area, carbonate units along the northern side of the Taoudeni Basin could be considered permissive host rocks for Carlin-type mineralization, but the deep-water carbonate lithologies are typically not favorable for such.

Open-File Report↗

USGS2015

Database of mineral deposits in the Islamic Republic of Mauritania (phase V, deliverables 90 and 91)

Three ore deposits databases from previous studies were evaluated and combined with new known mineral occurrences into one database, which can now be used to manage information about the known mineral occurrences of Mauritania. The Microsoft Access 2010 database opens with the list of tables and forms held within the database and a Switchboard control panel from which to easily navigate through the existing mineral deposit data and to enter data for new deposit locations. The database is a helpful tool for the organization of the basic information about the mineral occurrences of Mauritania. It is suggested the database be administered by a single operator in order to avoid data overlap and override that can result from shared real time data entry. It is proposed that the mineral occurrence database be used in concert with the geologic maps, geophysics and geochemistry datasets, as a publicly advertised interface for the abundant geospatial information that the Mauritanian government can provide to interested parties.

Open-File Report↗