Geology topics

Einat Lev

Publications and source records attributed to Einat Lev.

11 recordsLinked to original sources

USGS2026

Dynamics and evolution of the Kı̄lauea lower East Rift Zone 2018 fissure 8 lava flow and implications for multiphase magma properties

The 2018 Kı̄lauea lower East Rift Zone (KLERZ) eruption was one of the most voluminous eruptions on the Island of Hawai’i in the past 200 years, leading to major disruption and destroying over 700 homes and structures. The majority of the erupted magma was emitted as a lava flow from Ahu’ailā’au (fissure 8), which was active from late May to early August. To better understand the evolution of long-lived channelized lava flows, we examined the evolution of velocity, texture, and inferred rheology of the fissure 8 lava in space and time. We quantified lava flow surface velocities using particle image velocimetry in more than 200 aerial videos that span the lava flow duration and length. Velocity measurements were analyzed together with vesicularity and crystallinity measurements from 9 co-located post-eruptive field samples to understand the textural evolution of this flow and its impact on lava rheology and flow velocity. The fissure 8 flow was highly vesicular, with 79%–88% vesicularity at the vent, decreasing to 16%–26% vesicularity 12.5 km from the vent. The volume fraction occupied by crystals 50 in size increased from 6% at the vent to about 18% at 12.5 km downstream. We find that the effective flow viscosity increased at a quadratic rate with distance. Using experimentally determined liquid viscosity and applying established models to account for the effect of crystals and bubbles, we attribute this increase primarily to textural evolution driven initially by the near-vent loss of deformable bubbles and later by cooling and crystal growth. We demonstrate the importance of accounting for the evolution of vesicularity and the role of vesicles by showing that utilizing this capability in the open-source thermo-rheological lava flow propagation model PyFLOWGO allows for more accurate predictions of the observed flow velocities. Our modeling results suggest that small bubbles behaving rigidly are required to simulate the observed flow length, speed, and viscosities. Flow velocities of the fissure 8 lava also varied with time, driven by near-daily collapse events of the summit caldera. Temporal velocity changes were characterized by a period of steep acceleration, with the volumetric flux peaking around 4 h after a caldera collapse, followed by a period of gradual deceleration lasting up to 40 h or until the next collapse event. We use this temporal behavior to estimate the compressibility of the magma inside the plumbing system between the summit reservoir and the lower East Rift Zone. Overall, quantifying the spatial and temporal evolution of the KLERZ eruption provides information about magma and lava properties that can inform predictive modeling and hazard assessment during an eruption.

Hawaii↗

USGS2024

Mapping and classification of volcanic deposits using multi-sensor unoccupied aerial systems

The deposits from volcanic eruptions represent the record of activity at a volcano. Identification, classification, and interpretation of these deposits are crucial to the understanding of volcanic processes and assessing hazards. However, deposits often cover large areas and can be difficult or dangerous to access, making field mapping dangerous and time-consuming. Remote sensing techniques are often used to map and identify the deposits of volcanic eruptions, though these techniques present their own trade-offs in terms of image resolution, wavelength, and observation frequency. Here, we present a new approach for mapping and classifying volcanic deposits using a multi-sensor unoccupied aerial system (UAS), and demonstrate its application on lava and tephra deposits associated with the 2018 eruption of Sierra Negra volcano (Galápagos Archipelago, Ecuador). We surveyed the study area and collected visible and thermal infrared (TIR) images. We used structure-from-motion photogrammetry to create a digital elevation model (DEM) from the visual images and calculated the solar heating rate of the surface from temperature maps based on the TIR images. We find that the solar heating rate is highest for tephra deposits and lowest for ʻaʻā lava, with pāhoehoe lava having intermediate values. This is consistent with the solar heating rate correlating to the density and particle size of the surface. The solar heating rate for the lava flow also decreases with increasing distance from the vent, consistent with an increase in density as the lava degasses. We combined the surface roughness (calculated from the DEM) and the solar heating rate of the surface to remotely classify tephra deposits and different lava morphologies. We applied both supervised and unsupervised machine learning algorithms and demonstrate that supervised methods can replicate the manual classification while the unsupervised method can identify major surface units with no ground truth information. These methods allow for remote mapping and classification at high spatial resolution (< 1 meter) of a variety of volcanic deposits, with potential for application to deposits from other processes (e.g., fluvial, glacial) and deposits on other planetary bodies.

Galápagos Archipelago, Sierra Negra volcano↗

USGS2023

Lessons learned from the 2022 CONVERSE Monogenetic Volcanism Response Scenario exercise

When volcanic unrest occurs, the scientific community can advance fundamental understanding of volcanic systems, but only with coordination before, during, and after the event across academic and governmental agencies. To develop a coordinated response plan, the Community Network for Volcanic Eruption Response (CONVERSE) orchestrated a scenario exercise centered around a hypothetical volcanic crisis in Arizona’s San Francisco Volcanic Field (SFVF). The exercise ran virtually from February 4 to March 4, 2022. Over 60 scientists from both academic and governmental spheres participated. The scenario exercise was assessed for its effectiveness in supporting collaborative production of knowledge, catalyzing transdisciplinary collaboration, supporting researcher confidence, and fostering a culture of inclusion within the volcanology community. This identified a need to support early career researchers through community and allyship. Overall, the 2022 CONVERSE exercise demonstrated how a fully remote, extended scenario can be authentically implemented and help broaden participation within the volcano science community.

Arizona↗

USGS2022

Outgassing through magmatic fractures enables effusive eruption of silicic magma

Several mechanisms have been proposed to allow highly viscous silicic magma to outgas efficiently enough to erupt effusively. There is increasing evidence that challenges the classic foam-collapse model in which gas escapes through permeable bubble networks, and instead suggests that magmatic fracturing and/or accompanying localized fragmentation and welding within the conduit play an important role in outgassing. The 2011–2012 eruption at Cordón Caulle volcano, Chile, provides direct observations of the role of magmatic fractures. This eruption exhibited a months-long hybrid phase, in which rhyolitic lava extrusion was accompanied by vigorous gas-and-tephra venting through fractures in the lava dome surface. Some of these fractures were preserved as tuffisites (tephra-filled veins) in erupted lava and bombs. We integrate constraints from petrologic analyses of erupted products and video analyses of gas-and-tephra venting to construct a model for magma ascent in a conduit. The one-dimensional, two-phase, steady-state model considers outgassing through deforming permeable bubble networks, magmatic fractures, and adjacent wall rock. Simulations for a range of plausible magma ascent conditions indicate that the eruption of low-porosity lava observed at Cordón Caulle volcano occurs because of significant gas flux through fracture networks in the upper conduit. This modeling emphasizes the important role that outgassing through magmatic fractures plays in sustaining effusive or hybrid eruptions of silicic magma and in facilitating explosive-effusive transitions.

Puyehue Cordon Caulle volcanic complex↗

USGS2020

Volcanological applications of unoccupied aircraft systems (UAS): Developments, strategies, and future challenges

Unoccupied aircraft systems (UAS) are developing into fundamental tools for tackling the grand challenges in volcanology; here, we review the systems used and their diverse applications. UAS can typically provide image and topographic data at two orders of magnitude better spatial resolution than space-based remote sensing, and close-range observations at temporal resolutions down to those of video frame rates. Responsive deployments facilitate dense time-series measurements, unique opportunities for geophysical surveys, sample collection from hostile environments such as volcanic plumes and crater lakes, and emergency deployment of ground-based sensors (and robots) into hazardous regions. UAS have already been used to support hazard management and decision-makers during eruptive crises. As technologies advance, increased system capabilities, autonomy and availability, supported by more diverse and lighter-weight sensors, will offer unparalleled potential for hazard monitoring. UAS are expected to provide opportunities for pivotal advances in our understanding of complex physical and chemical volcanic processes.

Volcanica↗

USGS2020

Lava–water interaction and hydrothermal activity within the 2014–2015 Holuhraun Lava Flow Field, Iceland

Lava that erupted during the 2014–2015 Holuhraun eruption in Iceland flowed into a proglacial river system, resulting in aqueous cooling of the lava and an ephemeral hydrothermal system. We carried out a monitoring study of this system from 2015 to 2018 to document the cooling of the lava over this time, using thermocouple measurements and data-logging sensors. The heat loss rate from advection through this hydrothermal system in August 2015 was ~5.5 × 10 8 W; since eruption, aqueous cooling likely accounted for ~1% of the total heat loss from the lava. This estimate excludes steam losses from fumaroles as well as any groundwater that was not released to the surface, and thus is a lower bound. Near the terminus of the flow, advection of heat by flowing water may have locally accounted for tens of percent of the total cooling of that part of the flow. Our data quantify the importance of water cooling for this lava flow and can be compared with models to better understand lava–water interactions more generally. We also provide detailed methods for simple, low-cost monitoring of similar instances in the future.

Holuhraun Lava Flow Field↗

USGS2019

A global synthesis of lava lake dynamics

Active lava lakes represent a variety of open-vent volcanism in which a sizeable body of lava accumulates at the top of the magma column, constrained by the vent and/or crater geometry. The longevity of lava lakes reflects a balancing of cooling and outgassing occurring at the surface by input of hot and gas-rich magma from below. Due to their longevity and relative accessibility, lava lakes provide a natural laboratory for studying fundamental volcanic processes such as degassing, convection and cooling. This article examines all seven lakes that existed at the time of writing, located in the Pacific, Antarctica, Africa, and South and Central America. They span all tectonic environments, and a range of magma compositions. We focus on analysis of the lake surface motion using image velocimetry, which reveals both similarities and contrasts in outgassing and lake dynamics when comparing the different lakes. We identify two categories of lake behavior: Organized (Erta ’Ale, Nyiragongo, K¯ılauea after 2011, and Erebus) and Chaotic (Villarrica,Masaya, Marum). This division does not map directly to lake size, viscosity, gas emission rate, or temperature. Instead, when examined together, we find that the lakes follow a linear relationship between average surface speed and the ratio of total gas flux to lake surface area. This relationship points to the importance of both flux and lake size in addition to the total volumetric outgassing rate, and suggests a shared deep mechanism controls the supply of heat and gas to all lakes. On the other hand, the differences between Chaotic and Organized lakes highlight the important role of the geometry of the conduit-lake transition, which superimposes a shallow signal on that of the deep circulation. The spatial patterns of surface motion we document suggest the release of gas bubbles at Chaotic lakes is more efficient (i.e., bubbles are less likely to be retained and recycled) compared with Organized lakes. In addition, the data presented here indicate that the solidified crust of Organized lakes plays a role in regulating convection and outgassing in lava lakes.

Journal of Volcanology and Geothermal Research↗

USGS2019

Analog experiments of lava flow emplacement

Laboratory experiments that simulate lava flows have been in use by volcanologists for many years. The behavior of flows in the lab, where “eruption” parameters, material properties, and environmental settings are tightly controlled, provides insight into the influence of various factors on flow evolution. A second benefit of laboratory lava flows is to provide a set of observations with which numerical models of flow emplacement can be tested. Models of lava flow emplacement vary in mathematical approach, physical assumptions, and computational cost. Nonetheless, all models require thorough testing and evaluation, and laboratory experiments produce an excellent test for models. This paper provides a primer on modern analog laboratory lava flow experiments. It reviews scaling con- siderations and provides quantitative information meant to guide future experimentalists in designing their experiments to be relevant to natural processes. Traditional and novel laboratory techniques are described, including a discussion of current limitations. New insights from recent experiments highlight the impact of topographic conditions and highlight the importance of considering bed roughness, major obstacles, and slope breaks. The influence of episodic or non-uniform effusion rate is demonstrated through recent experi- mental works. Lastly, the paper discusses several open questions about lava flow emplacement and the ways in which future improvements in experimental methods, such as the ability to utilize three-phase suspensions and materials with complex rheologies and to image the interior of flows could help answer these.

Annals of Geophysics↗

USGS2017

Benchmarking computational fluid dynamics models of lava flow simulation for hazard assessment, forecasting, and risk management

Numerical simulations of lava flow emplacement are valuable for assessing lava flow hazards, forecasting active flows, designing flow mitigation measures, interpreting past eruptions, and understanding the controls on lava flow behavior. Existing lava flow models vary in simplifying assumptions, physics, dimensionality, and the degree to which they have been validated against analytical solutions, experiments, and natural observations. In order to assess existing models and guide the development of new codes, we conduct a benchmarking study of computational fluid dynamics (CFD) models for lava flow emplacement, including VolcFlow, OpenFOAM, FLOW-3D, COMSOL, and MOLASSES. We model viscous, cooling, and solidifying flows over horizontal planes, sloping surfaces, and into topographic obstacles. We compare model results to physical observations made during well-controlled analogue and molten basalt experiments, and to analytical theory when available. Overall, the models accurately simulate viscous flow with some variability in flow thickness where flows intersect obstacles. OpenFOAM, COMSOL, and FLOW-3D can each reproduce experimental measurements of cooling viscous flows, and OpenFOAM and FLOW-3D simulations with temperature-dependent rheology match results from molten basalt experiments. We assess the goodness-of-fit of the simulation results and the computational cost. Our results guide the selection of numerical simulation codes for different applications, including inferring emplacement conditions of past lava flows, modeling the temporal evolution of ongoing flows during eruption, and probabilistic assessment of lava flow hazard prior to eruption. Finally, we outline potential experiments and desired key observational data from future flows that would extend existing benchmarking data sets.

Journal of Applied Volcanology↗

USGS2016

Shallow and deep controls on lava lake surface motion at Kīlauea Volcano

Lava lakes provide a rare window into magmatic behavior, and lake surface motion has been used to infer deeper properties of the magmatic system. At Halema'uma'u Crater, at the summit of Kīlauea Volcano, multidisciplinary observations for the past several years indicate that lava lake surface motion can be broadly divided into two regimes: 1) stable and 2) unstable. Stable behavior is driven by lava upwelling from deeper in the lake (presumably directly from the conduit) and is an intrinsic process that drives lava lake surface motion most of the time. This stable behavior can be interrupted by periods of unstable flow (often reversals) driven by spattering – a shallowly-rooted process often extrinsically triggered by small rockfalls from the crater wall. The bursting bubbles at spatter sources create void spaces and a localized surface depression which draws and consumes surrounding surface crust. Spattering is therefore a location of lava downwelling, not upwelling. Stable (i.e. deep, upwelling-driven) and unstable (i.e. shallow, spattering-driven) behavior often alternate through time, have characteristic surface velocities, flow directions and surface temperature regimes, and also correspond to changes in spattering intensity, outgassing rates, lava level and seismic tremor. These results highlight that several processes, originating at different depths, can control the motion of the lava lake surface, and long-term interdisciplinary monitoring is required to separate these influences. These observations indicate that lake surface motion is not always a reliable proxy for deeper lake or magmatic processes. From these observations, we suggest that shallow outgassing (spattering), not lake convection, drives the variations in lake motion reported at Erta 'Ale lava lake.

Hawaii↗

USGS2015

Diverting lava flows in the lab

Recent volcanic eruptions in Hawai'i, Iceland and Cape Verde highlight the challenges of mitigating hazards when lava flows threaten infrastructure. Diversion barriers are the most common form of intervention, but historical attempts to divert lava flows have met with mixed success and there has been little systematic analysis of optimal barrier design. We examine the interaction of viscous flows of syrup and molten basalt with barriers in the laboratory. We find that flows thicken immediately upslope of an obstacle, forming a localized bow wave that can overtop barriers. Larger bow waves are generated by faster flows and by obstacles oriented at a high angle to the flow direction. The geometry of barriers also influences flow behaviour. Barriers designed to split or dam flows will slow flow advance, but cause the flow to widen, whereas oblique barriers can effectively divert flows, but may also accelerate flow advance. We argue that to be successful, mitigation of lava-flow hazards must incorporate the dynamics of lava flow–obstacle interactions into barrier design. The same generalizations apply to the effect of natural topographic features on flow geometry and advance rates .

Nature Geoscience↗