Geology topics

Claudia Flores

Publications and source records attributed to Claudia Flores.

7 recordsLinked to original sources

USGS2025

Kilometers-scale subsidence of the inner Puerto Rico Trench wall since the Pleistocene

We have observed a thin veneer of Pleistocene-age carbonate rocks on the southern side of Mona Block, a seamount northwest of Puerto Rico, above a water depth of 1800 m. Mona Block is located within the inner wall of the Puerto Rico Trench. A similar veneer of carbonate rocks (corals and pavement) was encountered during a deep submergence vehicle (DSV) Alvin dive in 1976 on the north side of Mona Block at depths of 3650–2900 m. We also observed a remnant Oligocene–Pliocene carbonate platform at a depth of 2080 m on the east side of the block. Restoring the carbonate outcrops to near sea level implies that Mona Block, with a summit currently at 670 m bsl, was an island with an elevation of ≥1000 m until the mid-Pleistocene and has subsided and tilted to the north thereafter. We suggest that the observed subsidence was caused by the foundering or retreating North American slab, which gave rise to the anomalously deep Puerto Rico Trench. Our estimated trench wall subsidence varies nonlinearly from ~800 m in the distal part to ≥3700 m near the trench. Carbonate platform subsidence north of Puerto Rico is older (mid-Pliocene), suggesting that subsidence and, by inference, trench collapse had propagated westward with time. Mona Block is thus a yardstick for studying mantle processes associated with slab retreat and foundering.

Geology↗

USGS2024

Field geology under the sea with a remotely operated vehicle: Mona Rift, Puerto Rico

We implemented concepts of field geology at great ocean depths by constructing virtual outcrops from a string of overlapping video frames collected by remotely operated vehicles (ROVs). This lower-cost alternative to drilling boreholes allows stratigraphic extension into the offshore and regional interpretation of marine seismic profiles. The imagery was collected along a dive transect on the western wall of Mona Rift, a deep and narrow rift northwest of Puerto Rico, between water depths of 1560 m and 3927 m. The northern coast of Puerto Rico and its large offshore area are underlain by a mid-Eocene and younger forearc basin topped by a thick carbonate platform. There are no drill holes offshore, and tying seismic lines across the shoreline there is problematic. We describe our virtual outcrop and constrain its age and stratigraphy using seven rock samples collected by ROV and compare the outcrop's stratigraphy to deep boreholes and outcrops on land. Our formation descriptions and ages agree, for the most part, with those on land, but we identified a 100-m-thick section that is represented on land by an unconformity. Our stratigraphic interpretation indicates lateral variations in formation thicknesses and establishes a cross-section for additional sampling of the Eocene–Pliocene geology. It also suggests that Mona Rift has formed since the mid-Pliocene. The presence or absence of ferromanganese (Fe-Mn) crust on rocks along the transect may be correlated with the smoothness of the rock surface.

Mona Rift, Puerto Rico↗

USGS2024

Photogrammetry of the deep seafloor from archived unmanned submersible exploration dives

Large amounts of video images have been collected for decades by scientific and governmental organizations in deep (>1000 m) water using manned and unmanned submersibles and towed cameras. The collected images were analyzed individually or were mosaiced in small areas with great effort. Here, we provide a workflow for utilizing modern photogrammetry to construct virtual geological outcrops hundreds or thousands of meters in length from these archived video images. The photogrammetry further allows quantitative measurements of these outcrops, which were previously unavailable. Although photogrammetry had been carried out in recent years in the deep sea, it had been limited to small areas with pre-defined overlapping dive paths. Here, we propose a workflow for constructing virtual outcrops from archived exploration dives, which addresses the complicating factors posed by single non-linear and variable-speed vehicle paths. These factors include poor navigation, variable lighting, differential color attenuation due to variable distance from the seafloor, and variable camera orientation with respect to the vehicle. In particular, the lack of accurate navigation necessitates reliance on image quality and the establishment of pseudo-ground-control points to build the photogrammetry model. Our workflow offers an inexpensive method for analyzing deep-sea geological environments from existing video images, particularly when coupled with rock samples.

Journal of Marine Science and Engineering↗

USGS2023

Crustal structure across the central Dead Sea Transform and surrounding areas: Insights into tectonic processes in continental transforms

New geophysical profiles across the central Dead Sea Transform (DST) near the Sea of Galilee, Israel, and surrounding highlands, augmented by static stress modeling, allow us to study continental transform plate deformation. The DST separates a ∼10 km thick sedimentary column above a thinned (16–23 km) crust to the west from a ∼7 km column above a ∼30-km thick crust to the east. Crustal thinning starts under the DST, as observed also farther south, indicating that the DST is indeed located along the boundary between the Arabian plate and its continental margin. Moho step here is gradual. The DST's eastern shoulder dips westward toward the DST unlike the upward flexed shoulder observed farther south, perhaps delineating the northern limit of a thinner and hotter lithosphere. The shape of the Sea of Galilee is modeled as an asymmetric pull-apart basin formed by a left-lateral stepover of 2.6 km between slightly divergent and underlapping strike-slip fault strands dipping 70° to the west. Reflection data indicate that these strands are not connected. Several fault traces within the Sea of Galilee have previously been suggested to carry part of the relative plate motion. However, given slip along the main DST faults, Coulomb stress will increase only on fault portions in the northern part of the lake, in accord with the geographical distribution of seismicity, suggesting that these faults are likely secondary. Mismatch between the DST strand locations in the geophysical profiles and the subsidence model, may reflect temporal changes in fault geometry.

Tectonics↗

USGS2023

Seafloor observations eliminate a landslide as the source of the 1918 Puerto Rico Tsunami

The 11 October 1918 devastating tsunami in northwest Puerto Rico had been used as an example for earthquake‐induced landslide tsunami hazard. Three pieces of evidence pointed to a landslide as the origin of the tsunami: the discovery of a large submarine landslide scar from bathymetry data collected by shipboard high‐resolution multibeam sonar, reported breaks of submarine cable within the scar, and the fit of tsunami models to flooding observations. Newly processed seafloor imagery collected by remotely operated vehicle (ROV) show, however, pervasive Fe–Mn crust (patina) on the landslide walls and floor, indicating that the landslide scar is at least several hundred years old. C 14 "> 14 C dates of sediment covering the landslide floor verify this interpretation. Although we have not searched the region systematically for an alternative tsunami source, we propose a possible source—a two‐segment normal‐fault rupture along the eastern wall of Mona rift. The proposed fault location matches the published normal faults with steep bathymetry and is close to the International Seismological Center–Global Earthquake Model catalog locations of the 1918 mainshock and aftershocks. The ROV observations further show fresh vertical slickensides and rock exposure along the proposed fault trace. Hydrodynamic models from an M w "> M w 7.2 earthquake rupture along the eastern wall of the rift faithfully reproduce the reported tsunami amplitudes, polarities, and arrival times. Our analysis emphasizes the value of close‐up observations and physical samples to augment remote sensing data in natural hazard studies.

Puerto Rico↗

USGS2017

Geologic controls on submarine slope failure along the central U.S. Atlantic margin: Insights from the Currituck Slide Complex

Multiple styles of failure, ranging from densely spaced, mass transport driven canyons to the large, slab-type slope failure of the Currituck Slide, characterize adjacent sections of the central U.S. Atlantic margin that appear to be defined by variations in geologic framework. Here we use regionally extensive, deep penetration multichannel seismic (MCS) profiles to reconstruct the influence of the antecedent margin physiography on sediment accumulation along the central U.S. Atlantic continental shelf-edge, slope, and uppermost rise from the Miocene to Present. These data are combined with high-resolution sparker MCS reflection profiles and multibeam bathymetry data across the Currituck Slide Complex. Pre-Neogene allostratigraphic horizons beneath the slope are generally characterized by low gradients and convex downslope profiles. This is followed by the development of thick, prograded deltaic clinoforms during the middle Miocene. Along-strike variations in morphology of a regional unconformity at the top of this middle Miocene unit appear to have set the stage for differing styles of mass transport along the margin. Areas north and south of the Currituck Slide are characterized by oblique margin morphology, defined by an angular shelf-edge and a relatively steep (> 8°), concave slope profile. Upper slope sediment bypass, closely spaced submarine canyons, and small, localized landslides confined to canyon heads and sidewalls characterize these sectors of the margin. In contrast, the Currituck region is defined by a sigmoidal geometry, with a rounded shelf-edge rollover and gentler slope gradient (< 6°). Thick (> 800 m), regionally continuous stratified slope deposits suggest the low gradient Currituck region was a primary depocenter for fluvial inputs during multiple sea level lowstands. These results imply that the rounded, gentle slope physiography developed during the middle Miocene allowed for a relatively high rate of subsequent sediment accumulation, thus providing a mechanism for compaction–induced overpressure that preconditioned the Currituck region for failure. Detailed examination of the regional geological framework illustrates the importance of both sediment supply and antecedent slope physiography in the development of large, potentially unstable depocenters along passive margins.

Marine Geology↗

USGS2016

Observations of seismicity and ground motion in the northeast U.S. Atlantic margin from ocean bottom seismometer data

Earthquake data from two short-period ocean-bottom seismometer (OBS) networks deployed for over a year on the continental slope off New York and southern New England were used to evaluate seismicity and ground motions along the continental margin. Our OBS networks located only one earthquake of M c ∼1.5 near the shelf edge during six months of recording, suggesting that seismic activity (M Lg >3.0) of the margin as far as 150–200 km offshore is probably successfully monitored by land stations without the need for OBS deployments. The spectral acceleration from two local earthquakes recorded by the OBS was found to be generally similar to the acceleration from these earthquakes recorded at several seismic stations on land and to hybrid empirical acceleration relationships for eastern North America. Therefore, the seismic attenuation used for eastern North America can be extended in this region at least to the continental slope. However, additional offshore studies are needed to verify these preliminary conclusions.

Seismological Research Letters↗