Search USGS⌕ Search

SEARCH · Search USGS

Results for “Torch”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

13 recordsLinked to original sources
USGS1994

Evaluation of effects caused by high copper concentrations in Torch Lake, Michigan, on reproduction of yellow perch

Elevated concentrations of copper are present in Torch Lake, Michigan, an Environmental Protection Agency Superfund site. The sauger ( Stizostedion canadense ) population in Torch Lake has been extirpated and walleye ( Stizostedion vitreum ) populations are maintained by stocking. We used yellow perch ( Perca flavescens ) to determine if chronic exposure to elevated copper concentrations has reduced the reproductive success of percids. Ripe yellow perch from Torch Lake and Gratiot Lake, a reference site, were captured between 6 May and 6 June 1990. Crosses were made within each lake and between lakes (both combinations); five pairs of each type were attempted. Portions of each egg mass were reared in Torch Lake water (34 ng/mL copper) and reference site water (Rice Lake) until 4 days posthatch (20-d to 28-d). Copper concentrations were found to be over two times as high as in reference samples both in Torch Lake water and in gonads of perch from Torch Lake. The percentages of eggs hatched in Torch Lake and reference lake water were not significantly different, although a trend of reduced hatch in Torch Lake water was apparent. Likewise, no significant differences were indicated in hatching success among crosses. However, duration of hatching was significantly longer for Torch Lake egg masses than for reference lake egg masses, indicating that copper may affect reproductive success through disruption of hatch coordination with food availability or reduction of larval fitness.

Michigan↗
USGS1972

Feeding behavior of lake whitefish and lake herring in Torch Lake, Michigan

It is proposed that Haemoproteus nettionis (Johnston and Cleland, 1909) Coatney, 1936 be accepted as the correct name for the Haemoproteus of Anatidae. A list of synonyms and amended description of the parasite is given. Infections are reported from wood ducks (Aix sponsa) and from domestic ducks and geese, the last representing a new host record. Natural transmission was demonstrated at the Patuxent Research Refuge, Laurel, Maryland. Possible seasonal variation is suggested with active carriers present as early as mid-April among adult wood ducks and most active transmission occurring in June and early July with limited transmission earlier or later.

Progressive Fish-Culturist↗
USGS2025

Metal-rich lacustrine sediments from legacy mining perpetuate copper exposure to aquatic-riparian food webs

Historic copper mining left a legacy of metal-rich tailings resulting in ecological impacts along and within Torch Lake, an area of concern in the Keweenaw Peninsula, Michigan, USA. Given the toxicity of copper to invertebrates, this study assessed the influence of this legacy on present day nearshore aquatic and terrestrial ecosystems. We measured the metal (Co, Cu, Ni, Zn, Cd) and metalloid (As) concentrations in sediment, pore water, surface water, larval and adult insects, and two riparian spider taxa collected from Torch Lake and a nearby reference lake. Overall, elevated metal and metalloid concentrations, particularly Cu, were measured in all sediment samples and some surface and pore water samples collected from Torch Lake. For instance, Cu concentrations in the Torch Lake sediment were ∼200% higher than the reference lake and all measured concentrations exceeded predicted effects concentrations by at least ninefold. Within larval insect tissues, we observed 160% higher Cu concentrations than measured in the reference lake, and Cu was the only measured element above predicted effects concentrations in Torch Lake. Adult insects collected at both lakes had similar metal concentrations irrespective of exposure levels. Yet we found 100% higher copper concentrations in Torch Lake riparian spiders, demonstrating elevated exposure risk to insectivores across the aquatic-terrestrial boundary. Our results highlight that other metals in the mixture may not be as concerning to adjacent riparian ecosystems, but copper remains a contaminant of concern in Torch Lake 60 years after mining ceased.

Michigan↗
USGS2013

Lake Louise Water (USGS47): A new isotopic reference water for stable hydrogen and oxygen isotope measurements

"RATIONALE: Because of the paucity of isotopic reference waters for daily use, a new secondary isotopic reference material has been prepared from Lake Louise water from Alberta, Canada for international distribution. MOTHODS: This water was filtered, homogenized, loaded into glass ampoules, sealed with a torch, autoclaved to eliminate biological activity, and measured by dual-inlet isotope-ratio mass spectrometry. This isotopic reference water is available by the case of 144 glass ampoules containing 5 mL of water in each ampoule. RESULTS: The δ2H and δ18O values of this reference water are –150.2 ± 0.5 ‰ and –19.80 ± 0.02 ‰, respectively, relative to VSMOW on scales normalized such that the δ2H and δ18O values of SLAP reference water are, respectively, –428 and –55.5 ‰. Each uncertainty is an estimated expanded uncertainty (U = 2uc) about the reference value that provides an interval that has about a 95-percent probability of encompassing the true value. CONCLUSION: This isotopic reference material, designated as USGS47, is intended as one of two isotopic reference waters for daily normalization of stable hydrogen and stable oxygen isotopic analysis of water with a mass spectrometer or a laser absorption spectrometer. "

Rapid Communications in Mass Spectrometry↗
USGS2014

Biscayne aquifer drinking water (USGS45): a new isotopic reference material for δ 2 H and δ 18 O measurements of water

RATIONALE As a result of the scarcity of isotopic reference waters for daily use, a new secondary isotopic reference material for international distribution has been prepared from drinking water collected from the Biscayne aquifer in Ft. Lauderdale, Florida. METHODS This isotopic reference water was filtered, homogenized, loaded into glass ampoules, sealed with a torch, autoclaved to eliminate biological activity, and measured by dual-inlet isotope-ratio mass spectrometry. This reference material is available by the case of 144 glass ampoules containing either 4 mL or 5 mL of water in each ampoule. RESULTS The δ 2 H and δ 18 O values of this reference material are –10.3 ± 0.4 ‰ and –2.238 ± 0.011 ‰, respectively, relative to VSMOW, on scales normalized such that the δ 2 H and δ 18 O values of SLAP reference water are, respectively, –428 and –55.5 ‰. Each uncertainty is an estimated expanded uncertainty ( U  = 2 u c ) about the reference value that provides an interval that has about a 95 % probability of encompassing the true value. CONCLUSIONS This isotopic reference material, designated as USGS45, is intended as one of two isotopic reference waters for daily normalization of stable hydrogen and oxygen isotopic analysis of water with an isotope-ratio mass spectrometer or a laser absorption spectrometer.

Rapid Communications in Mass Spectrometry↗
USGS2015

A new isotopic reference material for stable hydrogen and oxygen isotope-ratio measurements of water—USGS50 Lake Kyoga Water

Rationale As a result of the need for isotopic reference waters having high δ 2 H VSMOW-SLAP and δ 18 O VSMOW-SLAP values for daily use, especially for tropical and equatorial-zone freshwaters, a new secondary isotopic reference material for international distribution was prepared from water collected from Lake Kyoga, Uganda. Methods This isotopic reference lakewater was filtered through a membrane with 0.2-µm pore size, homogenized, loaded into glass ampoules that were sealed with a torch and autoclaved to eliminate biological activity, and measured by dual-inlet isotope-ratio mass spectrometry. This reference material is available in a case of 144 glass ampoules each containing 5 mL of water. Results The δ 2 H and δ 18 O values of this reference material are +32.8 ± 0.4 and +4.95 ± 0.02 mUr (milliurey = 0.001 = 1 ‰), respectively, relative to VSMOW, on scales normalized such that the δ 2 H and δ 18 O values of SLAP reference water are, respectively, −428 and −55.5 mUr. Each uncertainty is an estimated expanded uncertainty ( U  = 2 u c ) about the reference value that provides an interval that has about a 95 % probability of encompassing the true value. Conclusions This isotopic reference material, designated as USGS50, is intended as one of two reference waters for daily normalization of stable hydrogen and oxygen isotopic analysis of water with an isotope-ratio mass spectrometer or a laser absorption spectrometer, of use especially for isotope-hydrology laboratories analyzing freshwater samples from equatorial and tropical regions.

Lake Kyoga↗
USGS2025

Effects of chronic metal exposure and metamorphosis on the microbiomes of larval and adult insects and riparian spiders through the aquatic-riparian food web

The macroinvertebrate microbiome controls various aspects of the host's physiology, from regulation of environmental contaminants to reproductive output. Aquatic insects provide critical nutritional subsidies linking aquatic and riparian food webs while simultaneously serving as a contaminant pathway for riparian insectivores in polluted ecosystems. Previous studies have characterized the transport and transfer of contaminants from aquatic to riparian ecosystems through insect metamorphosis, but both contaminant exposure and metamorphosis are energetically intensive processes that may cause host microbiomes to undergo radical transformation in structure and function, potentially affecting the host's physiology. We collected arthropods from three sites within Torch Lake, a historical copper mine in the Keweenaw Peninsula, Michigan, USA, and three sites within a nearby reference lake. Our objectives were to: 1) characterize the variation in microbiome communities and predicted metagenomic functions with legacy copper mining activity across space, among host types and family-level host taxonomy, 2) characterize how insect metamorphosis alters the microbiome community, including the degree of endosymbiotic infection, and predicted metagenomic function. We field-collected organisms, extracted their DNA, and sequenced the 16S region of the rRNA gene to characterize microbiome communities, then predicted metagenomic function. Site, lake, and host taxonomy affected the host microbiome community composition. Copper exposure increased the abundance of xenobiotic and lipid metabolism pathways in the Araneidae spider microbiome. Insect metamorphosis reduced the alpha diversity, altered the community composition, and predicted metagenomic function. We observed a bioconcentration of endosymbiotic bacteria in adult insects, especially holometabolous insects. Through metamorphosis, we observed a transition in function from xenobiotic degradation pathways to carbohydrate metabolism. Overall, contaminant exposure alters the microbiome composition in aquatic insects and riparian spiders and alters the function of the microbiome across the aquatic-riparian interface. Furthermore, metamorphosis is a critical element in shaping the aquatic insect microbiome across its life history.

Michigan↗
USGS2014

USGS48 Puerto Rico precipitation - A new isotopic reference material for δ 2 H and δ 18 O measurements of water

A new secondary isotopic reference material has been prepared from Puerto Rico precipitation, which was filtered, homogenised, loaded into glass ampoules, sealed with a torch, autoclaved to eliminate biological activity, and calibrated by dual-inlet isotope-ratio mass spectrometry. This isotopic reference material, designated as USGS48, is intended to be one of two isotopic reference waters for daily normalisation of stable hydrogen (δ 2 H) and stable oxygen (δ 18 O) isotopic analysis of water with a mass spectrometer or a laser absorption spectrometer. The δ 2 H and δ 18 O values of this reference water are−2.0±0.4 and−2.224±0.012 ‰, respectively, relative to Vienna Standard Mean Ocean Water on scales normalised such that the δ 2 H and δ 18 O values of Standard Light Antarctic Precipitation reference water are−428 and−55.5 ‰, respectively. Each uncertainty is an estimated expanded uncertainty ( U =2 u c ) about the reference value that provides an interval that has about a 95 % probability of encompassing the true value. This isotopic reference water is available by the case of 144 glass ampoules containing 5 mL of water in each ampoule.

Puerto Rico↗
USGS2016

Antarctic ice-core water (USGS49) – A new isotopic reference material for δ2H and δ18O measurements of water

As a result of the scarcity of isotopic reference waters for daily use, a new secondary isotopic reference material for international distribution has been prepared from ice-core water from the Amundsen–Scott South Pole Station. This isotopic reference material, designated as USGS49, was filtered, homogenised, loaded into glass ampoules, sealed with a torch, autoclaved to eliminate biological activity and measured by dual-inlet isotope-ratio mass spectrometry. The δ 2 H and δ 18 O values of USGS49 are −394.7 ± 0.4 and −50.55 ± 0.04 mUr (where mUr = 0.001 = ‰), respectively, relative to VSMOW, on scales normalised such that the δ 2 H and δ 18 O values of SLAP reference water are, respectively, −428 and −55.5 mUr. Each uncertainty is an estimated expanded uncertainty ( U = 2 u c ) about the reference value that provides an interval that has about a 95% probability of encompassing the true value. This isotopic reference material is intended as one of two isotopic reference waters for daily normalisation of stable hydrogen and oxygen isotopic analysis of water with an isotope-ratio mass spectrometer or a laser absorption spectrometer. It is available by the case of 144 glass ampoules or as a set of sixteen glass ampoules containing 5 ml of water in each ampoule.

Geostandards and Geoanalytical Research↗
USGS2009

Fire treatment effects on vegetation structure, fuels, and potential fire severity in western U.S. forests

Abstract. Forest structure and species composition in many western U.S. coniferous forests have been altered through fire exclusion, past and ongoing harvesting practices, and livestock grazing over the 20th century. The effects of these activities have been most pronounced in seasonally dry, low and mid-elevation coniferous forests that once experienced frequent, low to moderate intensity, fire regimes. In this paper, we report the effects of Fire and Fire Surrogate (FFS) forest stand treatments on fuel load profiles, potential fire behavior, and fire severity under three weather scenarios from six western U.S. FFS sites. This replicated, multisite experiment provides a framework for drawing broad generalizations about the effectiveness of prescribed fire and mechanical treatments on surface fuel loads, forest structure, and potential fire severity. Mechanical treatments without fire resulted in combined 1-, 10-, and 100-hour surface fuel loads that were significantly greater than controls at three of five FFS sites. Canopy cover was significantly lower than controls at three of five FFS sites with mechanical-only treatments and at all five FFS sites with the mechanical plus burning treatment; fire-only treatments reduced canopy cover at only one site. For the combined treatment of mechanical plus fire, all five FFS sites with this treatment had a substantially lower likelihood of passive crown fire as indicated by the very high torching indices. FFS sites that experienced significant increases in 1-, 10-, and 100-hour combined surface fuel loads utilized harvest systems that left all activity fuels within experimental units. When mechanical treatments were followed by prescribed burning or pile burning, they were the most effective treatment for reducing crown fire potential and predicted tree mortality because of low surface fuel loads and increased vertical and horizontal canopy separation. Results indicate that mechanical plus fire, fire-only, and mechanical-only treatments using whole-tree harvest systems were all effective at reducing potential fire severity under severe fire weather conditions. Retaining the largest trees within stands also increased fire resistance. ?? 2009 by the Ecological Society of America.

Ecological Applications↗
USGS1995

Sea otters and kelp forests in Alaska: Generality and variation in a community ecological paradigm

Multiscale patterns of spatial and temporal variation in density and population structure were used to evaluate the generality of a three—trophic—level cascade among sea otters (Enhydra lutris), invertebrate herbivores, and macroalgae in Alaska. The paradigm holds that where sea otters occur herbivores are rare and plants are abundant, whereas when sea otters are absent herbivores are relatively common and plants are rare. Spatial patterns were based on 20 randomly placed quadrats at 153 randomly selected sites distributed among five locations with and four locations without sea otters. Both sea urchin and kelp abundance differed significantly among locations with vs. without sea otters in the Aleutian Islands and southeast Alaska. There was little (Aleutian Islands) or no (southeast Alaska) overlap between sites with and without sea otters, in plots of kelp density against urchin biomass. Despite intersite variation in the abundance of kelps and herbivores, these analyses demonstrate that sea otter predation has a predictable and broadly generalizable influence on the structure of Alaskan kelp forests. The percent cover of algal turf and suspension feeder assemblages also differed significantly (although less dramatically) between locations with and without sea otters. Temporal variation in community structure was assessed over periods of from 3 to 15 yr at sites in the Aleutian Islands and southeast Alaska where sea otters were 1) continuously present, 2) continuously absent, or 3) becoming reestablished because of natural range expansion. Kelp and sea urchin abundance remained largely unchanged at most sites where sea otters were continuously present or absent, the one exception being at Torch Bay (southeast Alaska), where kelp abundance varied significantly through time and urchin abundance varied significantly among sites because of episodic and patchy disturbances. In contrast, kelp and sea urchin abundances changed significantly, and in the expected directions, at sites that were being recolonized by sea otters. Sea urchin biomass declined by 50% in the Aleutian Islands and by nearly 100% in southeast Alaska following the spread of sea otters into previously unoccupied habitats. In response to these different rates and magnitudes of urchin reduction by sea otter predation, increases in kelp abundance were abrupt and highly significant in southeast Alaska but much smaller and slower over similar time periods in the Aleutian Islands. The different kelp colonization rates between southeast Alaska and the Aleutian Islands appear to be caused by large—scale differences in echinoid recruitment coupled with size—selective predation by sea otters for larger urchins. The length of urchin jaws (correlated with test diameter, r 2 = 0.968) in sea otter scats indicates that sea urchins <15—20 mm test diameter are rarely eaten by foraging sea otters. Sea urchin populations in the Aleutian Islands included high densities of small individuals (<20 mm test diameter) at all sites and during all years sampled, whereas in southeast Alaska similarly sized urchins were absent from most populations during most years. Small (<30—35 mm test diameter) tetracycline—marked urchins in the Aleutian Islands grew at a maximum rate of °10 mm/yr; thus the population must have significant recruitment annually, or at least every several years. In contrast, echinoid recruitment in southeast Alaska was more episodic, with many years to perhaps decades separating significant events. Our findings help explain regional differences in recovery rates of kelp forests following recolonization by sea otters.

Alaska↗
USGS1995

Cerro Prieto geothermal field, Mexico; chemical analyses and other data for 58 samples collected in 1977-1979

This report releases the results of selected chemical analyses by the USGS of fluids collected from geothennal power production wells at the Cerro Prieto Geothennal Field, Mexico. Cerro Prieto, the world's largest producing hot-water geothennal field, is located 32 km southeast of Mexicali, Baja California. Comision Federal de Electricidad de Mexico (CFE) gave permission for, and assisted in, sample collection. Data collection and reported analyses was made by the U.S. Geological Survey. Data collected in 1977 and 1978 where published previously by Ball and Jenne (1983) which was about half the data given here. This report also includes samples collected in 1979 which were not previously released. These activities, including this data release, are supported by the U.S. Department of Energy. Analyses given in the following section were made by James W. Ball and E.A. Jenne. The data have been reviewed with the assistance of Cathy Janik, USGS, Menlo Park. Some, but not all, details from Ball and Jenne (1983) concerning collection, and preservation and analytical procedures are repeated here. Nehring and Trusdell (1977) also provide an outline of some of the issues involved in the difficult task of collecting samples from geothermal wells. The initial intent of the study was to provide basic data for use in determining how these fluids should be managed either in disposal or in reinjection. Some of the hot, corrosive brines were separated as two-phase (water and steam) samples under pressure using a coiled condenser tube submerged in an ice/water mixture (called "condensed" samples). It is not known if these were total flow samples. Other samples were collected from the brine sampling valve of the separators (called "flashed" samples). Analyses given in the following section area sorted by (1) well number, (2) date, and (3) sample type(s). Analysis was by a Spectraspan III d.c. argon plasma emission spectrometer with a Spectraject III torch (Ball and Jenne, 1983). Elements were determined in two groups using interchangeable cassettes. Group one included B, Mn, Cu, Zn, Si, Zr, Be, Mn, Sr, Ti, Ca, Fe, Ba, K, Na, Rb, and Al. Group two included As, Se, Bi, Zn, Cd, Sb, Cu, Ni, Hg, Mo, Co, Cr, Fe, V, Tl, Li, and Pb. Ball and Jenne (1983) noted that analysis of B, Ca, Mg, Ba, and Sr generally gave precise results. Movement of the plasma or grating was observed to affect sensitivity over short time periods even while the instrument was carefully standardized and optimized. Sensitivity was also a function of sample concentration. All samples at the time of analysis contained a white precipitate (perhaps colloidal silica) thus the reported concentrations may not accurately represent the concentrations present at the time of collection (Ball and Jenne, 1983). Additional details about specific elements are given in the section on "Evaluation of data" (Bliss, this volume) following the data table.

Open-File Report↗