Search USGS⌕ Search

SEARCH · Search USGS

Results for “The Mountain Geologist”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,224 recordsLinked to original sources
USGS2025

Integrated stratigraphic and geochemical analysis of organic-rich intervals of the Lewis Shale in the eastern Washakie Basin, Wyoming

Geological studies in the Cretaceous Western Interior Seaway (KWIS) in North America reveal highly variable sedimentological conditions on its western shore caused by rapidly changing sea level and detrital input during the seaway’s closure. Here we examine a 601-foot (183 meters) continuous core through the lower part of the Maastrichtian Lewis Shale in the eastern Washakie Basin, Wyoming, through integrating stratigraphic and geochemical analyses to better understand organic matter deposition and preservation during the final marine transgression within the seaway. The core penetrates eight organic-rich flooding intervals (F1-F8) and a regional condensed section, informally known as the Asquith marker. The lower portions of the core record sediment input from a southern source, likely the Sierra Madre/Park Ranges, while the upper part records sediment input from a northern source, likely the Granite Mountains. This provenance transition is supported by regional stratigraphic analysis and changes in bulk mineral and trace metal composition. The Asquith marker and early flooding surfaces are enriched in oil-prone, marine organic matter deposited under dysoxic to euxinic conditions, whereas younger flooding surfaces show increased terrigenous input and poorer preservation conditions. The Asquith marker is identified as a prime oil-prone source rock. Although younger flooding surfaces also exhibit favorable source-rock properties, their generative potential is reduced due to increased clastic and terrigenous organic matter deposition caused by regression. These results emphasize the importance of sediment source variability, organic matter preservation, and changing redox conditions to provide insight into the sediment provenance and petroleum potential of the Lewis Shale in the context of the final transgression within the KWIS.

Colorado, Wyoming↗
USGS2007

Divisions of geologic time—Major chronostratigraphic and geochronologic units

Effective communication in the geosciences requires consistent uses of stratigraphic nomenclature, especially divisions of geologic time. A geologic time scale is composed of standard stratigraphic divisions based on rock sequences and calibrated in years. Over the years, the development of new dating methods and refinement of previous ones have stimulated revisions to geologic time scales. Since the mid-1990s, geologists from the U.S. Geological Survey (USGS), State geological surveys, academia, and other organizations have sought a consistent time scale to be used in communicating ages of geologic units in the United States. Many international debates have occurred over names and boundaries of units, and various time scales have been used by the geoscience community. For consistency purposes, the USGS Geologic Names Committee and the Association of American State Geologists developed Divisions of Geologic Time .

Fact Sheet↗
USGS2018

Divisions of geologic time—Major chronostratigraphic and geochronologic units

Introduction Effective communication in the geosciences requires a consistent nomenclature for stratigraphic units and, especially, for divisions of geologic time. A geologic time scale is composed of standard stratigraphic divisions based on rock sequences and is calibrated in years. Geologists from the U.S. Geological Survey (USGS), State geological surveys, academia, and other organizations require a consistent time scale to be used in communicating ages of geo­logic units in the United States. Many international debates have occurred over names and boundaries of units, and various time scales have been used by the geoscience community. For consistent usage of time terms, the USGS Geologic Names Committee and the Association of American State Geologists devel­oped the Divisions of Geologic Time ; the 2018 update in this fact sheet contains the unit names and boundary age estimates ratified by the International Commission on Stratigraphy in 2018. Scientists may use other published time scales, provided that these are specified and referenced.

Fact Sheet↗
USGS2025

Airborne geophysical efforts for critical mineral systems mapping in the southern Midcontinent, USA

The increasing global demand for critical minerals to support energy and technological advancement has accelerated exploration and research efforts for these essential resources. Since 2019, the United States Geological Survey (USGS) Earth Mapping Resources Initiative (EMRI) has worked to modernize geologic mapping of the Nation to better understand its critical mineral resources. To further this initiative, the USGS has flown a series of high-resolution airborne magnetic and radiometric surveys over large areas of the southern Midcontinent. The surveys cover known critical mineral deposits and areas with the potential to host additional critical minerals based on the presence of one or more overlapping mineral systems. One aspect of EMRI emphasizes close collaboration between the USGS and the Association of American State Geologists, as well as other government and industry partners to leverage geophysical, geological, and geochemical expertise on both regional and local scales. The EMRI high-resolution airborne survey data provide new insights into the geophysical framework of the southern Midcontinent and its critical mineral endowment. Additionally, discoveries made from the data have directed new studies for critical mineral exploration.

southern Midcontinent↗
USGS2026

Geologic map of the Sierra Nevada, California and western Nevada

THE GEOLOGIC MAP OF THE SIERRA NEVADA is a core component of the Sierra Nevada Earth Science Atlas, which also includes geophysical, neotectonic, economic, and geochronologic data. The map illustrates the distribution of geologic units across the Sierra Nevada and related adjacent areas. Geologic units are grouped by type and age into three categories: Principally Paleozoic and Mesozoic metasedimentary and metavolcanic wall rocks, most of which are grouped into terranes; Paleozoic and Mesozoic plutons and intrusive suites, which intrude the wall rocks and form the core batholith of the range; and Late Cretaceous and Cenozoic sedimentary and volcanic rocks and surficial deposits that unconformably overlap the older units. Related rock units were combined and simplified for presentation at a scale of 1:400,000, as shown in the list of map units and associated correlation of map units (Plate 1B) and description of map units (Appendix A). Tectonic faulting, folding and uplift have overprinted the rocks and have strongly influenced the spatial distribution of units and the distinct morphology of the Sierra Nevada as we see it today. The Atlas is the result of collaborative work by scientists and mapmakers from the California Geological Survey and the U.S. Geological Survey. The Atlas was originally envisioned by the late geologist Warren Nokleberg (1939-2021), who contributed much to the initial geologic map compilation

California, Nevada↗
USGS2026

Preliminary geology of the North Meadow Creek Area, Tobacco Root Mountains, southwest Montana: The North Meadow Creek Fault

This report documents a previously unmapped fault, informally referred to herein as the North Meadow Creek fault, on the east flank of the Tobacco Mountains of southwestern Montana. This fault has an apparently long and complex history, including Quaternary offset of an older alluvial terrace, offset of a debris flow of presumed Pleistocene age, offset of rhyolite lava flows of presumed Tertiary age from their presumed source several kilometers east, on the opposite side of the fault, and offset and possible rotation of blocks of Archean gneiss on northeast side of the fault. The western part of the fault is covered by glacial moraines of two apparent ages, both Pleistocene.

Montana↗
USGS2025

Stable isotope composition and geochemistry of calcite and dolomite in the Mountain Pass carbonatite: A lens into petrogenesis

Carbonatites host most of the global rare earth element (REE) deposits. The petrogenesis of these rocks, including magmatic and post-magmatic processes, are poorly understood but critical in forming and upgrading these deposits. The Mountain Pass carbonatite, which hosts the only active REE mine in North America, is lithologically variable but consistently contains >50% calcite and/or dolomite. Multiple generations of carbonates are evident, suggesting bulk analysis of carbonate minerals would generate a mixed isotopic and geochemical signature. In-situ stable carbon and oxygen isotopes, combined with geochemical analysis and petrography, distinguish carbonate generations, trace the source region of the carbonatite magma, and link carbonate genesis to REE mineralization throughout the intrusion. Primary carbon and oxygen isotope values outside the accepted mantle range may suggest a subduction-related carbon and oxygen source in the mantle. Deformation textures in primary calcite indicate syn- or post-crystallization ductile flow. Carbonates with secondary textures and heavy δ 13 C and δ 18 O values are associated with ore mineralization, suggesting fluid mobilization was important in concentrating REE and upgrading of the Mountain Pass deposit.

California↗
USGS2026

Early Miocene volcanic rocks and associated tectonics, Lava Hills and southern Bristol Mountains, California

Volcanic rocks of latest Oligocene to early Miocene age form an east-west belt across part of the central eastern Mojave Desert from the Whipple Mountains on the east to the Rosamond Hills on the west. We term this the central belt because it is separated from northern and southern belts by swaths with no volcanic rocks. Limited geochronologic data indicate that much of the belt is latest Oligocene and early Miocene in age, about 24 to 19 Ma, a finding that is consistent with these rocks being overlain by the 18.8 Ma Peach Spring Tuff in many places. We describe Miocene geology in a central area of the belt, in the Lava Hills, southern Bristol Mountains, and southern Old Dad Mountains. Sedimentary basins formed coeval with early andesite to rhyolite volcanism, progressing from fluvial and lacustrine tuffaceous sandstone to volcanic lavas, tuffs, and breccias, indicating that early basins formed proximal to volcanic edifices. Higher strata are fluvial and lacustrine with lavas punctuating the sequence. Although basins may partly have been formed within topographic lows bounded by volcanic domes, plateaus, and stratovolcanoes, consistent stratigraphic sections over wide areas indicate that tectonic basin evolution affected broad areas. The volcanic section is capped by local basalt flows and the regional Peach Spring Tuff. Limited data on normal faults support interpretations of early extensional basin development caused by northeast-southwest oriented stretching. Later extension caused stratal rotations, tilting early deposits down to the southwest. This tilted and subsequently beveled basin architecture was overlain by the youngest volcanic deposits, primarily rhyolite and basalt. The Peach Spring Tuff, 18.8 Ma, lies within this upper unit. Similar stratigraphic and structural relations are exposed in the nearby Marble Mountains and Van Winkle Mountain sections, reinforcing that a broad area underwent similar volcanism and tectonism. In our study area the upper unit is only very gently tilted except near dextral strike-slip faults of the eastern California shear zone. These late Miocene to Recent faults are represented as four main fault zones spaced about 5 km apart, representing distributed shear north of the Bristol Lake basin.

California↗
USGS2025

The role of bedrock circulation depth and porosity in mountain streamflow response to prolonged drought

Quantitative understanding is lacking on how the depth of active groundwater circulation in bedrock affects mountain streamflow response to a multi‐year drought. We use an integrated hydrological model to explore the sensitivity of a variety of streamflow metrics to bedrock circulation depth and porosity under a plausible extreme drought scenario lasting up to 5 years. Endmember depth versus hydraulic conductivity relationships and porosity values for fractured crystalline rock are simulated. With drought, a deeper circulation system with higher drainable porosity more effectively buffers minimum flow and significantly limits perennial stream loss in comparison to a shallow circulation system. Streamflow buffering is accomplished through extensive groundwater storage loss. However, deeper circulation systems experience prolonged recovery from drought in comparison to storage‐limited shallow systems. Research highlights the importance of characterizing the deeper bedrock hydrogeology in mountainous watersheds to better understand and predict drought impacts on stream ecosystem health and water resource sustainability.

Colorado↗
USGS2026

Mid-Cretaceous porphyritic magmatism in the Beartooth Mountains of the northern Laramide foreland and its connection to Frontier Formation sediment dispersal in Bighorn basin, Montana-Wyoming (USA), and Cordilleran tectonism

Porphyritic intrusions in the southeast Beartooth Mountains and porphyritic cobbles from the Torchlight conglomerate of the Cenomanian Frontier Formation in Bighorn basin (Montana-Wyoming, USA) bear striking resemblance. We utilize geologic mapping, petrography, geochemistry, and geochronology to characterize rocks from both locations and test whether the Beartooth Mountains area was the provenance for Bighorn basin cobbles. Mapping on Line Creek Plateau in the Beartooth Mountains shows three units with porphyritic phenocrysts consisting dominantly of plagioclase, plagioclase + potassium feldspar, and plagioclase + quartz. Petrography shows embayed quartz, opacitic rims, and zoned plagioclase. Geochemistry characterizes the intrusions as trachydacite to trachyte and trace elements exhibit enrichment in light rare earth elements and slight depletion in heavy rare earth elements relative to primitive mantle. Zircon U-Pb dating shows substantial Archean inheritance and ca. 104−92 Ma dates; some samples display multiple mid-Cretaceous date populations. Bighorn basin porphyritic cobbles exhibit similar modal mineralogy, near-identical geochemistry, and Archean inheritance and mid-Cretaceous geochronology. We suggest the porphyritic cobbles were sourced from basement-hosted porphyritic intrusions now exposed in the Beartooth Mountains, given that geochemistry does not agree with coeval volcanic sources along the Frontier Formation depositional fairway (Idaho batholith) or sedimentary-hosted Beartooth Mountains porphyritic sills intruded into Cambrian shale. Stratigraphic evidence does not support kilometer-scale mid-Cretaceous Beartooth Mountains exhumation to expose basement-hosted porphyritic intrusions, and we therefore present a volcanic hypothesis to bring rocks to the surface. This mid-Cretaceous multimillion-year magmatism is unexplained by tectonic models for the north-central Laramide foreland, and thus we further explore the emplacement processes, spatiotemporal significance, and tectonic implications of these rocks.

Montana, Wyoming↗
USGS2025

“Leaky weirs” capture alluvial deposition and enhance seasonal mountain-front recharge in dryland streams

“Leaky weirs” are rock structures installed in dryland streams, which are anchored into exposed bedrock, loosely cemented, and designed to allow water to slowly pass through. They are being tested at a ranch in southeastern Arizona, USA, to restore and conserve the historic range and desert wetlands. Data are collected to assess how leaky weirs impact surface water, subsurface water, and groundwater recharge—including stream discharge, timing, and depth of infiltration, and groundwater elevations. Three adjacent watersheds, two with outlets just below leaky weirs and one with leaky weirs farther upstream, were instrumented with water-level loggers, wildlife cameras, and crest stage instruments with temperature sensors in the soil. As most groundwater recharge is assumed to be focused along the mountain fronts in this region, mountain-block recharge is also evaluated to differentiate between the two using isotope analyses. Finally, a single, late-season flood event is scrutinized to consider the leaky weir effect on all monitored components in the water budget. Results indicated groundwater flow is primarily from the mountains to the east via older, regional mountain-block recharge. However, the development of shallow alluvial aquifers is supported by the leaky weirs, that slow flows, capture permeable sediments, and allow infiltration, thus enhancing mountain-front recharge. In turn, these new pockets of water help support the restoration of historic wetlands. Sediment accumulates where leaky weirs are installed, reducing flashy peak flows, and resulting in a series of infiltration ponds along the channel that support vegetation during growing seasons and recharge the shallow aquifer during non-growing seasons.

Arizona↗
USGS2025

Mapping bedrock outcrops in the Sierra Nevada Mountains (California, USA) using machine learning

Accurate, high-resolution maps of bedrock outcrops can be valuable for applications such as models of land–atmosphere interactions, mineral assessments, ecosystem mapping, and hazard mapping. The increasing availability of high-resolution imagery can be coupled with machine learning techniques to improve regional bedrock outcrop maps. In the United States, the existing 30 m U.S. Geological Survey (USGS) National Land Cover Database (NLCD) tends to misestimate extents of barren land, which includes bedrock outcrops. This impacts many calculations beyond bedrock mapping, including soil carbon storage, hydrologic modeling, and erosion susceptibility. Here, we tested if a machine learning (ML) model could more accurately map exposed bedrock than NLCD across the entire Sierra Nevada Mountains (California, USA). The ML model was trained to identify pixels that are likely bedrock from 0.6 m imagery from the National Agriculture Imagery Program (NAIP). First, we labeled exposed bedrock at twenty sites covering more than 83 km 2 (0.13%) of the Sierra Nevada region. These labels were then used to train and test the model, which gave 83% precision and 78% recall, with a 90% overall accuracy of correctly predicting bedrock. We used the trained model to map bedrock outcrops across the entire Sierra Nevada region and compared the ML map with the NLCD map. At the twenty labeled sites, we found the NLCD barren land class, even though it includes more than just bedrock outcrops, accounted for only 41% and 40% of mapped bedrock from our labels and ML predictions, respectively. This substantial difference illustrates that ML bedrock models can have a role in improving land-cover maps, like NLCD, for a range of science applications.

California↗
USGS1998

Characterization of hydrogeologic units using matrix properties, Yucca Mountain, Nevada

Determination of the suitability of Yucca Mountain, in southern Nevada, as a geologic repository for high-level radioactive waste requires the use of numerical flow and transport models. Input for these models includes parameters that describe hydrologic properties and the initial and boundary conditions for all rock materials within the unsaturated zone, as well as some of the upper rocks in the saturated zone. There are 30 hydrogeologic units in the unsaturated zone, and each unit is defined by limited ranges where a discrete volume of rock contains similar hydrogeologic properties. These hydrogeologic units can be easily located in space by using three-dimensional lithostratigraphic models based on relation- ships of the properties with the lithostratigraphy. Physical properties of bulk density, porosity, and particle density; flow properties of saturated hydraulic conductivity and moisture-retention characteristics; and the state variables (variables describing the current state of field conditions) of saturation and water potential were determined for each unit. Units were defined using (1) a data base developed from 4,892 rock samples collected from the coring of 23 shallow and 8 deep boreholes, (2) described lithostratigraphic boundaries and corresponding relations to porosity, (3) recognition of transition zones with pronounced changes in properties over short vertical distances, (4) characterization of the influence of mineral alteration on hydrologic properties such as permeability and moisture-retention characteristics, and (5) a statistical analysis to evaluate where boundaries should be adjusted to minimize the variance within layers. This study describes the correlation of hydrologic properties to porosity, a property that is well related to the lithostratigraphy and depositional and cooling history of the volcanic deposits and can, therefore, be modeled to be distributed laterally. Parameters of the hydrogeologic units developed in this study and the relation of flow properties to porosity that are described can be used to produce detailed and accurate representations of the core-scale hydrologic processes ongoing at Yucca Mountain.

Nevada↗
USGS2026

Groundwater budget for the Mountain Home area, southern Idaho, 2022–23

The U.S. Geological Survey, with funding from the Idaho Department of Water Resources, developed a groundwater budget for the Mountain Home area in southern Idaho for irrigation year 2023 (November 1, 2022–October 31, 2023). This study focused on the water balance across the Cinder Cone Butte Critical Groundwater Area (CGWA), Mountain Home Groundwater Management Area (GWMA), and the rest of the study area (RoSA), compiling data from various sources, including precipitation records, groundwater level measurements, metered groundwater pumpage data, surface water diversions and evapotranspiration (ET) estimates derived from remote sensing satellite imagery, and ground-based reference data. Key inflow components included recharge from applied surface water irrigation (which incorporates incidental recharge from irrigation practices and conveyance losses), estimated tributary streamflow, and estimated mountain block recharge. The key outflow components were groundwater pumpage for irrigation, municipal, industrial, and domestic uses, and ET. Recharge from applied irrigation and mountain block recharge were the largest inflows, and groundwater pumpage for irrigation was the largest outflow. The CGWA had a positive groundwater budget residual of 2,170 acre-feet (acre-ft), which contrasts with observed long-term groundwater level declines and historical trends of storage depletion. This positive residual is likely associated with unquantified outflows, including lateral groundwater flow out of the subregion, or other complexities, such as overestimated tributary contributions relative to the actual recharge for the 2023 water budget. The GWMA exhibited a positive residual of 56,563 acre-ft, primarily owing to recharge from applied surface water irrigation and areal recharge during a wetter-than-average year, which allowed irrigation entities to deliver more water from in-basin and out-of-basin reservoirs. The RoSA showed a large positive residual of 124,933 acre-ft. The interpretation of these positive residuals must account for significant uncertainties, including estimations of areal recharge, tributary streamflow (particularly losses and diversions), ET, the volume of surface water loss to the Snake River, lateral groundwater flows between subregions and across study area boundaries, and the unquantified groundwater discharge to the Snake River. These uncertainties, in combination with the complex hydrogeologic controls on water movement and limitations of remotely sensed data, directly affect the accuracy of water availability assessments. Future data collection efforts would help reduce these uncertainties and support water resource management decisions in the Mountain Home area. Key efforts could include installing additional streamflow gaging stations (particularly to quantify tributary losses and gains and surface water losses to the Snake River), improving groundwater pumpage metering, and validating remotely sensed ET data with ground-based measurements. Furthermore, to better quantify unrepresented or highly uncertain fluxes, focused investigations on groundwater discharge to the Snake River, lateral groundwater flows between subregions and across study area boundaries, and a more robust determination of the actual influence and volume of mountain block recharge would help refine future water availability assessments for the Mountain Home area.

Idaho↗
USGS2026

Insights into Mountain Pass carbonatite formation from in-situ sulfur isotopes and geochemistry of sulfate and sulfide minerals

The Mountain Pass carbonatite stock hosts a world-class rare earth element deposit and may be classified as a carbonate-sulfate igneous rock, as it contains on average > 50 volume percent carbonate minerals and 20 to 30 volume percent sulfate minerals. The sulfates range in composition from barite to celestine and locally occur with sparse sulfide minerals. We investigate the origin of sulfur enrichment and the occurrence of sulfur-bearing minerals in the Mountain Pass carbonatite with in-situ sulfur isotope and mineral chemistry. Barite cores with δ 34 S of 1 to 3‰ do not coexist with sulfides, whereas celestine rims with δ 34 S of > 3‰ are associated with sulfides with δ 34 S < -10‰. We propose a model in which sulfur-bearing sediments were subducted during episodes of plate convergence in the Mojave Province that preceded Mountain Pass magmatism. Metasomatism of the overlying mantle by melts derived from the subducted sediments generated an unusually carbon- and sulfur-rich source to yield carbonatite magmas. Sulfur from primary carbonatite magmas and ~ 1 to 7% sulfur from subducted sediment melts yielded a slightly enriched δ 34 S composition (relative to depleted mantle δ 34 S of -1‰) for early crystallizing barite. Celestine rims on magmatic barite cores formed at low, hydrothermal temperatures (< 350 °C) based on S isotope thermometry for equilibrium celestine-galena and celestine-pyrite pairs. The sparse sulfides in the carbonatite stock are not in equilibrium with the primary barite cores and therefore do not permit S isotope thermometry estimates of magmatic temperatures. The S/Se ratios of sulfide minerals (> 3,400) typically exceed primitive mantle values (S/Se of 3,340), also consistent with their derivation from hydrothermal fluids. Trace occurrences of sulfide and sulfate minerals in alkaline silicate stocks related to the carbonatite stock have similar δ 34 S compositions and yield similarly low formation temperatures, suggesting regionally extensive and chemically similar sulfur-bearing hydrothermal fluids that imparted lithologically diverse rocks with a consistent sulfur isotope fingerprint.

California, Nevada↗
USGS2025

Geochemistry and radiogenic isotopes constrain the mantle source region of the Mountain Pass Intrusive Suite, California

The Mountain Pass carbonatite stock is the largest rare earth element (REE) deposit and only active REE mine in the United States. The carbonatite intrusion and spatially associated alkaline silicate intrusions constitute the Mountain Pass Intrusive Suite, which is located within the Mojave Province in California. Both the carbonatite and the alkaline silicate rocks are enriched in large ion lithophile elements and light REEs, and less enriched to depleted in high field strength elements, indicating the mantle source region was metasomatically enriched in incompatible trace elements. The cause of this metasomatic mantle enrichment and the genetic relationship between the carbonatite and the alkaline silicate stocks are poorly understood. In this study, major and trace element geochemical data and isotopic (Rb-Sr, Sm-Nd, and Lu-Hf) data are presented to constrain genesis of the Mountain Pass Intrusive Suite, from mantle source region to the intrusion of the stocks. Our geochemical data are consistent with derivation of the alkaline silicate and carbonatite melts through partial melting from a shared mantle source region rather than through liquid immiscibility or fractional crystallization and separation of a carbothermal fluid. Although the Rb-Sr isotopic system in the Mountain Pass Intrusive Suite is disturbed at the whole-rock scale, the isotopic systems for whole-rock Sm-Nd (εNd i = ‐2.2 ± 0.8) and zircon Lu-Hf (εHf i = 0.1 ± 1.1) are robust and support mantle derivation of the magmas. Geochemical modeling using experimentally derived partition coefficients was used to identify possible causes of enrichment in incompatible elements through metasomatism in the mantle source region. Modeling of metasomatism by melts derived by partial melting of deeply subducted carbonated sediments approximates observed Mountain Pass Intrusive Suite trace element chemistry. Scattered εHf i in inherited zircon (2.8 ± 2.6) is consistent with derivation from an arc-related environment with substantial crustal contamination. Paleotectonic studies in the Mojave Province indicate that regional subduction preceded emplacement of the Mountain Pass Intrusive Suite by ∼300 Ma. Melting of the Mountain Pass source region may have been caused by post-collisional thermal relaxation and extension.

California↗
USGS2008

Geology and geochemistry of Jurassic plutonic rocks, Baboquivari Mountains, south-central Arizona

Among the plutons of the Jurassic magmatic arc segment in southern Arizona, northern Sonora, and southern California, two distinctive rock types dominate, occurring together in numerous mountain ranges: porphyritic, titanite-bearing hornblende-biotite granodiorite; and biotite leucogranite. These characteristic rocks are particularly well preserved and well exposed around Kitt Peak, in the Baboquivari Mountains, southern Arizona. The Middle to early Late Jurassic Kitt Peak Plutonic Suite (KPPS) comprises three units: Aguirre Peak Quartz Diorite (APQD;<170 Ma, >=165 Ma, U-Pb), chiefly hornblende mesodiorite; Kitt Peak Granodiorite (KPGD; 165 Ma), hornblende-biotite granodiorite and monzogranite; and Pavo Kug Granite (PKG; 159 Ma), equigranular biotite leucogranite. This range also hosts a fourth, regionally unusual, Jurassic plutonic unit: the Baboquivari Peak Perthite Granite, related to post-arc, Late Jurassic crustal extension. Binary variation diagrams, incompatible element patterns, and REE spectra indicate APQD and KPGD are consanguineous. APQD basaltic mesodiorite evidently approximates the parental magma for the APQD–KPGD series. More evolved rocks of this series evidently formed by combinations of fractional crystallization and mixing with or assimilation of crustal material. PKG is less directly related to APQD and KPGD than these two are to one another.

Arizona, Sonora↗