SEARCH · Search USGS

Results for “The Moon”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 recordsLinked to original sources

USGS2011

Sources and physical processes responsible for OH/H2O in the lunarsoil as revealed by the Moon Mineralogy Mapper (M3)

Analysis of two absorption features near 3 μ m in the lunar reflectance spectrum, observed by the orbiting M 3 spectrometer and interpreted as being due to OH and H 2 O, is presented, and the results are used to discuss the processes producing these molecules. This analysis focuses on the dependence of the absorptions on lunar physical properties, including composition, illumination, latitude, and temperature. Solar wind proton-induced hydroxylation is proposed as the creation process, and its products could be a source for other reported types of hydrogen-rich material and water. The irregular and damaged fine-grained lunar soil seems especially adapted for trapping solar wind protons and forming OH owing to abundant dangling oxygen bonds. The M 3 data reveal that the strengths of the two absorptions are correlated and widespread, and both are correlated with lunar composition but in different ways. Feldspathic material seems richer in OH. These results seem to rule out water from the lunar interior and cometary infall as major sources. There appear to be correlations of apparent band strengths with time of day and lighting conditions. However, thermal emission from the Moon reduces the apparent strengths of the M 3 absorptions, and its removal is not yet completely successful. Further, many of the lunar physical properties are themselves intercorrelated, and so separating these dependencies on the absorptions is difficult, due to the incomplete M 3 data set. This process should also operate on other airless silicate surfaces, such as Mercury and Vesta, which will be visited by the Dawn spacecraft in mid-2011.

Journal of Geophysical Research E: Planets↗

USGS2011

Newer views of the Moon: Comparing spectra from Clementine and the Moon Mineralogy Mapper

The Moon Mineralogy Mapper (M 3 ) provided the first global hyperspectral data of the lunar surface in 85 bands from 460 to 2980 nm. The Clementine mission provided the first global multispectral maps the lunar surface in 11 spectral bands across the ultraviolet-visible (UV-VIS) and near-infrared (NIR). In an effort to understand how M 3 improves our ability to analyze and interpret lunar data, we compare M 3 spectra with those from Clementine's UV-VIS and NIR cameras. The Clementine mission provided the first global multispectral maps the lunar surface in 11 spectral bands across the UV-VIS and NIR. We have found that M 3 reflectance values are lower across all wavelengths compared with albedos from both of Clementine's UV-VIS and NIR cameras. M 3 spectra show the Moon to be redder, that is, have a steeper continuum slope, than indicated by Clementine. The 1 μ m absorption band depths may be comparable between the instruments, but Clementine data consistently exhibit shallower 2 μ m band depths than M 3 . Absorption band minimums are difficult to compare due to the significantly different spectral resolutions.

Journal of Geophysical Research↗

USGS2024

Geologic constraints on the formation and evolution of Saturn’s mid-sized moons

Saturn’s mid-sized icy moons have complex relationships with Saturn’s interior, the rings, and with each other, which can be expressed in their shapes, interiors, and geology. Observations of their physical states can, thus, provide important constraints on the ages and formation mechanism(s) of the moons, which in turn informs our understanding of the formation and evolution of Saturn and its rings. Here, we describe the cratering records of the mid-sized moons and the value and limitations of their use for constraining the histories of the moons. We also discuss observational constraints on the interior structures of the moons and geologically-derived inferences on their thermal budgets through time. Overall, the geologic records of the moons (with the exception of Mimas) include evidence of epochs of high heat flows, short- and long-lived subsurface oceans, extensional tectonics, and considerable cratering. Curiously, Mimas presents no clear evidence of an ocean within its surface geology, but its rotation and orbit indicate a present-day ocean. While the moons need not be primordial to produce the observed levels of interior evolution and geologic activity, there is likely a minimum age associated with their development that has yet to be determined. Uncertainties in the populations impacting the moons makes it challenging to further constrain their formation timeframes using craters, whereas the characteristics of their cores and other geologic inferences of their thermal evolutions may help narrow down their potential histories. Disruptive collisions may have also played an important role in the formation and evolution of Saturn’s mid-sized moons, and even the rings of Saturn, although more sophisticated modeling is needed to determine the collision conditions that produce rings and moons that fit the observational constraints. Overall, the existence and physical characteristics of Saturn’s mid-sized moons provide critical benchmarks for the development of formation theories.

Space Science Reviews↗

USGS2014

California State Waters Map Series — Offshore of Half Moon Bay, California

In 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP), designed to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats, and geology within the 3-nautical-mile limit of California’s State Waters. The CSMP approach is to create highly detailed seafloor maps through collection, integration, interpretation, and visualization of swath sonar data, acoustic backscatter, seafloor video, seafloor photography, high-resolution seismic-reflection profiles, and bottom-sediment sampling data. The map products display seafloor morphology and character, identify potential marine benthic habitats, and illustrate both the surficial seafloor geology and shallow (to about 100 m) subsurface geology. The Offshore of Half Moon Bay map area is located in northern California, on the Pacific coast of the San Francisco Peninsula about 40 kilometers south of the Golden Gate. The city of Half Moon Bay, which is situated on the east side of the Half Moon Bay embayment, is the nearest significant onshore cultural center in the map area, with a population of about 11,000. The Pillar Point Harbor at the north edge of Half Moon Bay offers a protected landing for boats and provides other marine infrastructure. The map area lies offshore of the Santa Cruz Mountains, part of the northwest-trending Coast Ranges that run roughly parallel to the San Andreas Fault Zone. The Santa Cruz Mountains lie between the San Andreas Fault Zone and the San Gregorio Fault system. The flat coastal area, which is the most recent of numerous marine terraces, was formed by wave erosion about 105 thousand years ago. The higher elevation of this same terrace west of the Half Moon Bay Airport is caused by uplift on the Seal Cove Fault, a splay of the San Gregorio Fault Zone. Although originally incised into the rising terrain horizontally, the ancient terrace surface has been gently folded into a northwest-plunging syncline by compression related to right-lateral strike-slip movement along the San Gregorio Fault Zone. The lowest elevation coincides with the deepest part of Half Moon Bay; the terrace surface rises both to the north and to the south. Uplift in this map area has resulted in relatively shallow water depths within California’s State Waters and, thus, little accommodation space for sediment accumulation. Sediment is observed in the shelter of Half Moon Bay and on the outer half of the California’s State Waters shelf. Sediment in the area is mobile, often forming dunes and sand waves. A westward bend in the San Andreas Fault Zone, southeast of the map area, coupled with right-lateral movement along the Seal Cove Fault, which comes ashore in Pillar Point Harbor, has resulted in the folding and uplifting of sedimentary rocks of the Purisima Formation in the offshore. Differential erosion of these folded and faulted layers of the Purisima Formation has exposed the parallel curved-rock ridges that are visible on the seafloor from the headland at Pillar Point. During the winter, strong North Pacific storms generate large, long-period waves that shoal and break over this bedrock reef at the world-famous surfing location known as Mavericks. The Offshore of Half Moon Bay map area lies within the cold-temperate biogeographic zone that is called either the “Oregonian province” or the “northern California ecoregion.” This biogeographic province is maintained by the long-term stability of the southward-flowing California Current, an eastern limb of the North Pacific subtropical gyre that flows from Oregon to Baja California. At its midpoint off central California, the California Current transports subarctic surface (0–500 m deep) waters southward, about 150 to 1,300 km from shore. Seasonal northwesterly winds that are, in part, responsible for the California Current, generate coastal upwelling. The south end of the Oregonian province is at Point Conception (about 365 km south of the map area), although its associated phylogeographic group of marine fauna may extend beyond to the area offshore of Los Angeles in southern California. The ocean off central California has experienced a warming over the last 50 years that is driving an ecosystem shift away from the productive subarctic regime towards a depopulated subtropical environment. Seafloor habitats in the Offshore of Half Moon Bay map area, which lies within the Shelf (continental shelf) megahabitat, range from significant rocky outcrops that support kelp-forest communities nearshore to rocky-reef communities in deep water. Biological productivity resulting from coastal upwelling supports populations of sea birds such as Sooty Shearwater, Western Gull, Common Murre, Cassin’s Auklet, and many other less populous bird species. In addition, an observable recovery of Humpback and Blue Whales has occurred in the area; both species are dependent on coastal upwelling to provide nutrients. The large extent of exposed inner shelf bedrock supports large forests of “bull kelp,” which is well adapted for high wave-energy environments. Common fish species found in the kelp beds and rocky reefs include lingcod and various species of rockfish and greenling.

California↗

USGS2011

The Moon Mineralogy Mapper (M3) imaging spectrometer for lunar science: Instrument description, calibration, on‐orbit measurements, science data calibration and on‐orbit validation

The NASA Discovery Moon Mineralogy Mapper imaging spectrometer was selected to pursue a wide range of science objectives requiring measurement of composition at fine spatial scales over the full lunar surface. To pursue these objectives, a broad spectral range imaging spectrometer with high uniformity and high signal-to-noise ratio capable of measuring compositionally diagnostic spectral absorption features from a wide variety of known and possible lunar materials was required. For this purpose the Moon Mineralogy Mapper imaging spectrometer was designed and developed that measures the spectral range from 430 to 3000 nm with 10 nm spectral sampling through a 24 degree field of view with 0.7 milliradian spatial sampling. The instrument has a signal-to-noise ratio of greater than 400 for the specified equatorial reference radiance and greater than 100 for the polar reference radiance. The spectral cross-track uniformity is >90% and spectral instantaneous field-of-view uniformity is >90%. The Moon Mineralogy Mapper was launched on Chandrayaan-1 on the 22nd of October. On the 18th of November 2008 the Moon Mineralogy Mapper was turned on and collected a first light data set within 24 h. During this early checkout period and throughout the mission the spacecraft thermal environment and orbital parameters varied more than expected and placed operational and data quality constraints on the measurements. On the 29th of August 2009, spacecraft communication was lost. Over the course of the flight mission 1542 downlinked data sets were acquired that provide coverage of more than 95% of the lunar surface. An end-to-end science data calibration system was developed and all measurements have been passed through this system and delivered to the Planetary Data System (PDS.NASA.GOV). An extensive effort has been undertaken by the science team to validate the Moon Mineralogy Mapper science measurements in the context of the mission objectives. A focused spectral, radiometric, spatial, and uniformity validation effort has been pursued with selected data sets including an Earth-view data set. With this effort an initial validation of the on-orbit performance of the imaging spectrometer has been achieved, including validation of the cross-track spectral uniformity and spectral instantaneous field of view uniformity. The Moon Mineralogy Mapper is the first imaging spectrometer to measure a data set of this kind at the Moon. These calibrated science measurements are being used to address the full set of science goals and objectives for this mission.

Journal of Geophysical Research E: Planets↗

USGS2008

Radiometric calibration stability and inter-calibration of solar-band instruments in orbit using the moon

With the increased emphasis on monitoring the Earth's climate from space, more stringent calibration requirements are being placed on the data products from remote sensing satellite instruments. Among these are stability over decade-length time scales and consistency across sensors and platforms. For radiometer instruments in the solar reflectance wavelength range (visible to shortwave infrared), maintaining calibration on orbit is difficult due to the lack of absolute radiometric standards suitable for flight use. The Moon presents a luminous source that can be viewed by all instruments in Earth orbit. Considered as a solar diffuser, the lunar surface is exceedingly stable. The chief difficulty with using the Moon is the strong variations in the Moon's brightness with illumination and viewing geometry. This mandates the use of a photometric model to compare lunar observations, either over time by the same instrument or between instruments. The U.S. Geological Survey in Flagstaff, Arizona, under NASA sponsorship, has developed a model for the lunar spectral irradiance that explicitly accounts for the effects of phase, the lunar librations, and the lunar surface reflectance properties. The model predicts variations in the Moon's brightness with precision ???1% over a continuous phase range from eclipse to the quarter lunar phases. Given a time series of Moon observations taken by an instrument, the geometric prediction capability of the lunar irradiance model enables sensor calibration stability with sub-percent per year precision. Cross-calibration of instruments with similar passbands can be achieved with precision comparable to the model precision. Although the Moon observations used for intercomparison can be widely separated in phase angle and/or time, SeaWiFS and MODIS have acquired lunar views closely spaced in time. These data provide an example to assess inter-calibration biases between these two instruments.

Conference Paper↗

USGS1998

The clementine bistatic radar experiment: Evidence for ice on the moon

Ice deposits, derived from comets and water-bearing meteorites hitting the Moon over geological times, have long been postulated to exist in dark areas near the poles of the Moon. The characteristics of radio waves beamed from the Clementine spacecraft into the polar areas, reflected from the Moon's surface, and received on the large dish antennas of the Deep Space Network here on Earth show that roughly the volume of a small lake (0.9-1.8 km 3 ) of water ice makes up part of the Moon's surface layer near the south pole. The discovery of ice near the lunar south pole has important ramifications for a permanent return to the Moon. These deposits could be used to manufacture rocket propellant and to support human life on the Moon.

Solar System Research↗

USGS2022

Acquisition of Moon measurements by Earth orbiting sensors for lunar calibration

The reflected light from the Moon can be utilized as a reference for radiometric calibration by employing a model to generate reference values corresponding to the Moon observations made by instruments. Using a calibration target that is outside the atmosphere provides a distinct advantage for space-based instruments; however, the lunar irradiance sensed by satellite instruments naturally changes as the host spacecraft traverses its orbit. This article presents a study of the potential impact on lunar radiometric measurements due to their acquisition from an orbiting platform. A simulation of a Sun-synchronous orbit was coupled to the U.S. Geological Survey (USGS) lunar model to generate predicted irradiances for points along orbit passes through several lunations. These irradiance values exhibit variations tied to the spacecraft motion, arising primarily from changes in the Moon-sensor distance and the phase angle. The two effects are similar in overall magnitude, but their respective contributions depend on the time of month and the orbit. Relative changes in irradiance mostly fall within an envelope of ±0.006% per second, except at the smallest phase angles. These studies enable planning space-based Moon observations to minimize the change in the target irradiance, an important consideration for measurements acquired for radiometric characterization of the Moon.

IEEE Transactions on Geoscience and Remote Sensing↗

USGS1985

Topographic mapping of the Moon

Contour maps of the Moon have been compiled by photogrammetric methods that use stereoscopic combinations of all available metric photographs from the Apollo 15, 16, and 17 missions. The maps utilize the same format as the existing NASA shaded-relief Lunar Planning Charts (LOC-1, -2, -3, and -4), which have a scale of 1:2 750 000. The map contour interval is 500m. A control net derived from Apollo photographs by Doyle and others was used for the compilation. Contour lines and elevations are referred to the new topographic datum of the Moon, which is defined in terms of spherical harmonics from the lunar gravity field. Compilation of all four LOC charts was completed on analytical plotters from 566 stereo models of Apollo metric photographs that cover approximately 20% of the Moon. This is the first step toward compiling a global topographic map of the Moon at a scale of 1:5 000 000. ?? 1985 D. Reidel Publishing Company.

Earth, Moon and Planets↗

USGS2016

Complex explosive volcanic activity on the Moon within Oppenheimer crater

Oppenheimer Crater is a floor-fractured crater located within the South Pole-Aitken basin on the Moon, and exhibits more than a dozen localized pyroclastic deposits associated with the fractures. Localized pyroclastic volcanism on the Moon is thought to form as a result of intermittently explosive Vulcanian eruptions under low effusion rates, in contrast to the higher-effusion rate, Hawaiian-style fire fountaining inferred to form larger regional deposits. We use Lunar Reconnaissance Orbiter Camera images and Diviner Radiometer mid-infrared data, Chandrayaan-1 orbiter Moon Mineralogy Mapper near-infrared spectra, and Clementine orbiter Ultraviolet/Visible camera images to test the hypothesis that the pyroclastic deposits in Oppenheimer crater were emplaced via Vulcanian activity by constraining their composition and mineralogy. Mineralogically, we find that the deposits are variable mixtures of orthopyroxene and minor clinopyroxene sourced from the crater floor, juvenile clinopyroxene, and juvenile iron-rich glass, and that the mineralogy of the pyroclastics varies both across the Oppenheimer deposits as a whole and within individual deposits. We observe similar variability in the inferred iron content of pyroclastic glasses, and note in particular that the northwest deposit, associated with Oppenheimer U crater, contains the most iron-rich volcanic glass thus far identified on the Moon, which could be a useful future resource. We propose that this variability in mineralogy indicates variability in eruption style, and that it cannot be explained by a simple Vulcanian eruption. A Vulcanian eruption should cause significant country rock to be incorporated into the pyroclastic deposit; however, large areas within many of the deposits exhibit spectra consistent with high abundances of juvenile phases and very little floor material. Thus, we propose that at least the most recent portion of these deposits must have erupted via a Strombolian or more continuous fire fountaining eruption, and in some cases may have included an effusive component. These results suggest that localized lunar pyroclastic deposits may have a more complex origin and mode of emplacement than previously thought.

Icarus↗

USGS2023

Relationship between explosive and effusive volcanism in the Montes Apenninus region of the Moon

Lunar Pyroclastic Deposits (LPDs) are sites of explosive volcanism and often occur in areas of effusive volcanism on the Moon. On Earth, it has been observed that most volcanism has both effusive and explosive phases, whereas on the Moon, these two types of volcanism have typically been considered separately. We hypothesize that the relationship between explosive and effusive volcanism on the Moon is similar to what is observed on the Earth, where individual eruptions can experience multiple phases rather than one type of volcanism always preceding another or occurring separately. We present observations from the Moon Mineralogy Mapper detailing compositional relationships between volcanic features in the lunar Montes Apenninus region. We evaluated whether co-located LPDs and effusive features (e.g., rilles, mare) could have erupted from the same volcanic vent or even at the same time based on their compositional similarities and stratigraphic relationships. We found that the LPDs have varied stratigraphic relationships with co-located effusive features. We identified LPDs near sinuous rilles that may be related to the formation of the rille, where explosive and effusive volcanism occurred at the same vent (e.g., Mozart Rille), and LPDs that may be unrelated to the rille (e.g., Rimae Bode and Rima Bode LPD). Our results suggest that lunar volcanism can mirror terrestrial volcanism, with explosive and effusive eruptions demonstrating more complex dynamics and relationships than previously thought. This variability suggests that the relationship between LPDs and nearby volcanic features cannot be generalized for studies on their resource potential, eruption styles, or deposit volume.

Journal of Geophysical Research: Planets↗

USGS1996

Establishing the moon as a spectral radiance standard

A new automated observatory dedicated to the radiometry of the moon has been constructed to provide new radiance information for calibration of earth-orbiting imaging instruments, particularly Earth Observing System instruments. Instrumentation includes an imaging photometer with 4.5-in. resolution on a fully digital mount and a full-aperture radiance calibration source. Interference filters within 0.35–0.95 µm correspond to standard stellar magnitude systems, accommodate wavelengths of lunar spectral contrast, and approximate some band-passes of planned earth-orbiting instruments (ASTER, Landsat-7 ETM, MISR, MODIS, and SeaWIFS). The same equipment is used for lunar and stellar observations, with the use of an aperture stop in lunar imaging to comply with Nyquist's theorem and lengthen exposure times to avoid scintillation effects. A typical robotic night run involves observation of about 60 photometric standard stars and the moon; about 10 of the standard stars are observed repeatedly to determine atmospheric extinction, and the moon is observed several times. Observations are to be made on every photometric night during the bright half of the month for at least 4.5 years to adequately cover phase and libration variation. Each lunar image is reduced to absolute exoatmospheric radiance and reprojected to a fixed selenographic grid system. The collection of these images at various liberators and phase angles will be reduced to photometric models for each of the approximately 120 000 points in the lunar grid for each filter. Radiance models of the moon can then be produced for the precise geometry of an orbiting instrument observation. Expected errors are under 1% relative and 2.5% absolute. A second telescope operating from 1.0 to 2.5 µm is planned.

Journal of Atmospheric and Oceanic Technology↗

USGS2020

The Moon as a climate-quality radiometric calibration reference

On-orbit calibration requirements for a space-based climate observing system include long-term sensor response stability and reliable inter-calibration of multiple sensors, both contemporaneous and in succession. The difficulties with achieving these for reflected solar wavelength instruments are well known. The Moon can be considered a diffuse reflector of sunlight, and its exceptional photometric stability has enabled development of a lunar radiometric reference, manifest as a model that is queried for the specific conditions of Moon observations. The lunar irradiance model developed by the Robotic Lunar Observatory (ROLO) project has adequate precision for sensor response temporal trending, but a climate-quality lunar reference will require at least an order of magnitude improvement in absolute accuracy. To redevelop the lunar calibration reference with sub-percent uncertainty and SI traceability requires collecting new, high-accuracy Moon characterization measurements. This paper describes specifications for such measurements, along with a conceptual framework for reconstructing the lunar reference using them. Three currently active NASA-sponsored projects have objectives to acquire measurements that can support a climate-quality lunar reference: air-LUSI, dedicated lunar spectral irradiance measurements from the NASA ER-2 high altitude aircraft; ARCSTONE, dedicated lunar spectral reflectance measurements from a small satellite; and Moon viewing opportunities by CLARREO Pathfinder from the International Space Station.

Remote Sensing↗

USGS2011

Compositional diversity and geologic insights of the Aristarchus crater from Moon Mineralogy Mapper data

The Moon Mineralogy Mapper (M3) acquired high spatial and spectral resolution data of the Aristarchus Plateau with 140 m/pixel in 85 spectral bands from 0.43 to 3.0 m. The data were collected as radiance and converted to reflectance using the observational constraints and a solar spectrum scaled to the Moon-Sun distance. Summary spectral parameters for the area of mafic silicate 1 and 2 m bands were calculated from the M3 data and used to map the distribution of key units that were then analyzed in detail with the spectral data. This analysis focuses on five key compositional units in the region. (1) The central peaks are shown to be strongly enriched in feldspar and are likely from the upper plagioclase-rich crust of the Moon. (2) The impact melt is compositionally diverse with clear signatures of feldspathic crust, olivine, and glass. (3) The crater walls and ejecta show a high degree of spatial heterogeneity and evidence for massive breccia blocks. (4) Olivine, strongly concentrated on the rim, wall, and exterior of the southeastern quadrant of the crater, is commonly associated the impact melt. (5) There are at least two types of glass deposits observed: pyroclastic glass and impact glass. Copyright 2011 by the American Geophysical Union.

Journal of Geophysical Research E: Planets↗

USGS2012

Compositional variations on the Moon: Recalibration of Galileo solid‐state imaging data for the Orientale region and farside

Updated radiometric calibration and systematic processing procedures for Galileo solid‐state imaging (SSI) data from the first (1990) Earth‐Moon encounter are presented. These procedures were applied to a whole‐disk imaging sequence of the Moon centered near Mare Orientale, called Lunmap 14 (L14). Processing of L14 data included radiometric calibration, subpixel coregistration, scattered light removal, geometric control and reprojection, photometric normalization, and calibration to Earth‐based spectra. Coregistration and scattered‐light removal procedures are improvements over the initial calibration of the SSI mosaics. The effects of scattered light correction are best seen using a whole‐Moon view such as L14; resolution of the debated amounts of light scattering from within or outside the camera field of view is not necessary. Scattered light removal particularly affects the 1‐μm spectral region and has implications for interpretation of mafic mineral signatures in mare deposits of the lunar limb and farside. Recalibrated spectra indicate that mare ponds of the limb show moderately deep 1‐μm absorptions, and thus mafic mineral contents, comparable to those of other nearside basalts. Mafic mineral contents of Schiller‐Shickard cryptomaria are higher than previously thought and are similar to some low‐Ti nearside basalts. Many of the recalibrated spectra from South Pole/Aitken are similar to those of Schiller‐Schickard cryptomaria, suggesting that many of these soils represent a mixed mare/highland lithology. The hypothesis that there is an olivine enrichment in southern South Pole/Aitken basin is not supported strongly by spectra shown here.

Journal of Geophysical Research: Planets↗

USGS2012

The competition between thermal contraction and differentiation in the stress history of the Moon

The scarcity of both extension and compression features on the Moon strongly constrains the history of the lunar radius—to variations of less than ±1 km over the past 3.8 Gyr. This limit has traditionally been interpreted as requiring a delicate balance between thermal contraction of the near‐surface and expansion of a substantial cold interior region. Recent theories of lunar origin (e.g., giant impact), in contrast, favor a “hot” initial state. We propose that a reconciliation may be possible by taking account of the volume change Δ V / V | d due to differentiation. We calculate STP densities based on simplified normative mineralogies for a suite of estimates of the bulk lunar composition, of primary lunar basalt, and of the residuum left when the maximum amount of the latter is extracted from the former. Typically Δ V / V | d ≃ 2 to 5%—an expansion equivalent to heating by ∼10 3 K. Provided the timing of differentiation is correct, one might offset the cooling of a magma ocean as much as 630 km deep by differentiation of the remainder of the Moon (which need not start much below the solidus temperature). A large but not impossible amount of gabbroic melt production is implied: ∼100 times the volume of mare basalts known to have been extruded. We do not address the detailed genetic relationship of this melt to the basalts observed on the lunar surface but point out that it need not have reached the surface directly or even have entered the crust in order for the expansion to have occurred. To assess the timing of melt formation, we investigate a simple conductive lunar thermal model which takes account of both Δ V / V | d and thermal contraction. Our initial state is characterized by a central temperature T c and a depth Z 0 above which the material (derived from the magma ocean) is already at the solidus and is not suceptible to volume changes upon further differentiation. We find a range of models satisfying the limits on radius increase and decrease. The hottest has T c = 1210 K, Z 0 = 400 km; without Δ V / V | d , we would need a larger or colder (or both) core, e.g., T c ≲ 700 K for Z 0 = 200–400 km, in agreement with previous investigators. Our modeling thus lends credence to the idea that the Moon could have been initially ≳50% molten (with the remainder relatively close to the solidus) and yet experienced little volume change over the last 3.8 Gyr.

Journal of Geophysical Research B: Solid Earth↗

USGS2023

Moon-forming impactor as a source of Earth’s basal mantle anomalies

Seismic images of Earth’s interior have revealed two continent-sized anomalies with low seismic velocities, known as the large low-velocity provinces (LLVPs), in the lowermost mantle . The LLVPs are often interpreted as intrinsically dense heterogeneities that are compositionally distinct from the surrounding mantle . Here we show that LLVPs may represent buried relics of Theia mantle material (TMM) that was preserved in proto-Earth’s mantle after the Moon-forming giant impact . Our canonical giant-impact simulations show that a fraction of Theia’s mantle could have been delivered to proto-Earth’s solid lower mantle. We find that TMM is intrinsically 2.0–3.5% denser than proto-Earth’s mantle based on models of Theia’s mantle and the observed higher FeO content of the Moon. Our mantle convection models show that dense TMM blobs with a size of tens of kilometres after the impact can later sink and accumulate into LLVP-like thermochemical piles atop Earth’s core and survive to the present day. The LLVPs may, thus, be a natural consequence of the Moon-forming giant impact. Because giant impacts are common at the end stages of planet accretion, similar mantle heterogeneities caused by impacts may also exist in the interiors of other planetary bodies.

Nature↗

USGS1976

Steps to the moon

On July 20, 1969, man walked on the surface of the Moon and began a new chapter of his studies that will eventually disclose the geologic nature of the Earth's nearest neighbor. Although he has finally reached the Moon and sampled its substance, much work and study remain before he will know the full scientific significance of the first landing. This booklet briefly summarizes the steps man has taken to understand the Moon and what he thinks he has learned to date as a result of his centuries-long speculations and studies.

General Information Product↗