Search USGS⌕ Search

SEARCH · Search USGS

Results for “Scientific Drilling”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 recordsLinked to original sources
USGS1986

SALTON SEA SCIENTIFIC DRILLING PROJECT: SCIENTIFIC PROGRAM.

The Salton Sea Scientific Drilling Project, was spudded on 24 October 1985, and reached a total depth of 10,564 ft. (3. 2 km) on 17 March 1986. There followed a period of logging, a flow test, and downhole scientific measurements. The scientific goals were integrated smoothly with the engineering and economic objectives of the program and the ideal of 'science driving the drill' in continental scientific drilling projects was achieved in large measure. The principal scientific goals of the project were to study the physical and chemical processes involved in an active, magmatically driven hydrothermal system. To facilitate these studies, high priority was attached to four areas of sample and data collection, namely: (1) core and cuttings, (2) formation fluids, (3) geophysical logging, and (4) downhole physical measurements, particularly temperatures and pressures.

Bulletin. Geothermal Resources Council↗
USGS1988

Salton Sea Scientific Drilling Program

The Salton Sea Scientific Drilling Program (SSSDP) was the first large-scale drilling project undertaken by the U.S Continental Scientific Drilling Program. The objectives of the SSSDP were (1) to drill a deep well into the Salton Sea Geothermal Field in the Imperial Valley of California, (2) to retrieve a high percentage of core and cuttings along the entire depth of the well, (3) to obtain a comprehensive suite of geophysical logs, (4) to conduct flow tests at two depths (and to take fluid samples therefrom), and (5) to carry out several downhole experiments. These activites enabled the U.S Geological Survey and cooperating agencies to study the physical and chemical processes involved in an active hydrothermal system driven by a molten-rock heat source. This program, orginally conceived by Wilfred A. Elders, professor of geology at the University of California at Riverside, was coordinated under an inter-agency accord among the Geological Survey, the U.S Department of Energy, and the National Science Foundation.

California↗
USGS2007

Unique microbial community in drilling fluids from Chinese continental scientific drilling

Circulating drilling fluid is often regarded as a contamination source in investigations of subsurface microbiology. However, it also provides an opportunity to sample geological fluids at depth and to study contained microbial communities. During our study of deep subsurface microbiology of the Chinese Continental Scientific Deep drilling project, we collected 6 drilling fluid samples from a borehole from 2290 to 3350 m below the land surface. Microbial communities in these samples were characterized with cultivation-dependent and -independent techniques. Characterization of 16S rRNA genes indicated that the bacterial clone sequences related to Firmicutes became progressively dominant with increasing depth. Most sequences were related to anaerobic, thermophilic, halophilic or alkaliphilic bacteria. These habitats were consistent with the measured geochemical characteristics of the drilling fluids that have incorporated geological fluids and partly reflected the in-situ conditions. Several clone types were closely related to Thermoanaerobacter ethanolicus, Caldicellulosiruptor lactoaceticus , and Anaerobranca gottschalkii , an anaerobic metal-reducer, an extreme thermophile, and an anaerobic chemoorganotroph, respectively, with an optimal growth temperature of 50–68°C. Seven anaerobic, thermophilic Fe(III)-reducing bacterial isolates were obtained and they were capable of reducing iron oxide and clay minerals to produce siderite, vivianite, and illite. The archaeal diversity was low. Most archaeal sequences were not related to any known cultivated species, but rather to environmental clone sequences recovered from subsurface environments. We infer that the detected microbes were derived from geological fluids at depth and their growth habitats reflected the deep subsurface conditions. These findings have important implications for microbial survival and their ecological functions in the deep subsurface.

Geomicrobiology Journal↗
USGS1986

Preliminary report on geophysical well-logging activity on the Salton Sea Scientific Drilling Project, Imperial Valley, California

The Salton Sea Scientific Drilling Project has culminated in a 10,564-ft deep test well, State 2-14 well, in the Imperial Valley of southern California. A comprehensive scientific program of drilling, coring, and downhole measurements, which was conducted for about 5 months, has obtained much scientific information concerning the physical and chemical processes associated with an active hydrothermal system. This report primarily focuses on the geophysical logging activities at the State 2-14 well and provides early dissemination of geophysical data to other investigators working on complementary studies. Geophysical-log data were obtained by a commercial logging company and by the U.S. Geological Survey (USGS). Most of the commercial logs were obtained during three visits to the site; only one commercial log was obtained below a depth of 6,000 ft. The commercial logs obtained were dual induction, natural gamma, compensated neutron formation density, caliper and sonic. The USGS logging effort consisted of four primary periods, with many logs extending below a depth of 6,000 ft. The USGS logs obtained were temperature, caliper, natural gamma, gamma spectral, epithermal neutron, acoustic velocity, full-waveform, and acoustic televiewer. Various problems occurred throughout the drilling phase of the Salton Sea Scientific Drilling Project that made successful logging difficult: (1) borehole constrictions, possibly resulting from mud coagulation, (2) maximum temperatures of about 300 C, and (3) borehole conditions unfavorable for logging because of numerous zones of fluid loss, cement plugs, and damage caused by repeated trips in and out of the hole. These factors hampered and compromised logging quality at several open-hole intervals. The quality of the logs was dependent on the degree of probe sophistication and sensitivity to borehole-wall conditions. Digitized logs presented were processed on site and are presented in increments of 1,000 ft. A summary of the numerous factors that may be relevant to this interpretation also is presented. (Lantz-PTT)

Open-File Report↗
USGS1996

Isotopic evolution of Mauna Kea volcano: Results from the initial phase of the Hawaii Scientific Drilling Project

We have examined the Sr, Nd, and Pb isotopic compositions of Mauna Kea lavas recovered by the first drilling phase of the Hawaii Scientific Drilling Project. These lavas, which range in age from ∼200 to 400 ka, provide a detailed record of chemical and isotopic changes in basalt composition during the shield/postshield transition and extend our record of Mauna Kea volcanism to a late-shield period roughly equivalent to the last ∼100 ka of Mauna Loa activity. Stratigraphic variations in isotopic composition reveal a gradual shift over time toward a more depleted source composition (e.g., higher 143 Nd/ 144 Nd, lower 87 Sr/ 86 Sr, and lower 3 He/ 4 He). This gradual evolution is in sharp contrast with the abrupt appearance of alkalic lavas at ∼240 ka recorded by the upper 50 m of Mauna Kea lavas from the core. Intercalated tholeiitic and alkalic lavas from the uppermost Mauna Kea section are isotopically indistinguishable. Combined with major element evidence (e.g., decreasing SiO 2 and increasing FeO) that the depth of melt segregation increased during the transition from tholeiitic to alkalic volcanism, the isotopic similarity of tholeiitic and alkalic lavas argues against significant lithosphere involvement during melt generation. Instead, the depleted isotopic signatures found in late shield-stage lavas are best explained by increasing the proportion of melt generated from a depleted upper mantle component entrained and heated by the rising central plume. Direct comparison of Mauna Kea and Mauna Loa lavas erupted at equivalent stages in these volcanoes' life cycles reveals persistent chemical and isotopic differences independent of the temporal evolution of each volcano. The oldest lavas recovered from the drillcore are similar to modern Kilauea lavas, but are distinct from Mauna Loa lavas. Mauna Kea lavas have higher 143 Nd/ 144 Nd and 206 Pb/ 204 Pb and lower 87 Sr/ 86 Sr. Higher concentrations of incompatible trace elements in primary magmas, lower SiO 2 , and higher FeO also indicate that Mauna Kea lavas formed through smaller degrees of partial melting at greater depth than Mauna Loa lavas. These chemical and isotopic differences are consistently found between volcanoes along the western “Loa” and eastern “Kea” trends and reflect large-scale variations in source composition and melting environment. We propose a simple model of a radially zoned plume centered beneath the Loa trend. Loa trend lavas generated from the hot plume axis reflect high degrees of partial melting from a source containing a mixture of enriched plume-source material and entrained lower mantle. Kea trend lavas, in contrast, are generated from the cooler, peripheral portions of the plume, record lower degrees of partial melting, and tap a source containing a greater proportion of depleted upper mantle.

Journal of Geophysical Research B: Solid Earth↗
USGS2008

Physical rock properties in and around a conduit zone by well-logging in the Unzen Scientific Drilling Project, Japan

The objective of the Unzen Scientific Drilling Project (USDP) is not only to reveal the structure and eruption history of the Unzen volcano but also to clarify the ascent and degassing mechanisms of the magma conduit. Conduit drilling (USDP-4) was conducted in 2004, which targeted the magma conduit for the 1990-95 eruption. The total drilled length of USDP-4 was 1995.75??m. Geophysical well logging, including resistivity, gamma-ray, spontaneous potential, sonic-wave velocity, density, neutron porosity, and Fullbore Formation MicroImager (FMI), was conducted at each drilling stage. Variations in the physical properties of the rocks were revealed by the well-log data, which correlated with not only large-scale formation boundaries but also small-scale changes in lithology. Such variations were evident in the lava dike, pyroclastic rocks, and breccias over depth intervals ranging from 1 to 40??m. These data support previous models for structure of the lava conduit, in that they indicate the existence of alternating layers of high-resistivity and high P-wave velocity rocks corresponding to the lava dikes, in proximity to narrower zones exhibiting high porosity, low resistivity, and low P-wave velocity. These narrow, low-porosity zones are presumably higher in permeability than the adjacent rocks and may form preferential conduits for degassing during magma ascent. ?? 2008 Elsevier B.V.

Journal of Volcanology and Geothermal Research↗
USGS2011

Deep scientific drilling in the San Andreas Fault Zone

A deep scientific drilling experiment in San Andreas fault zone would provide data essential to understanding the structure, composition, mechanical behavior, and physical state of an active, major plate-boundary fault. Toward this end, we are working with an international team of scientists and engineers to propose a long-term, integrated program of surface-based geological and geophysical investigations and deep drilling along the San Andreas fault system. Prior to drilling, a suite of comparative geodynamic models will be developed incorporating detailed investigations of geology, crustal structure, geophysical environment, hydrology, seismotectonics, and fault-movement history at each of the candidate sites. These studies will have a major impact on our understanding of the structure and physical properties of the San Andreas fault system and will form a critical framework for applying the knowledge gained in a deep San Andreas borehole to other segments of the fault and other tectonic environments.

California, Nevada↗
USGS2005

Structure and stress state of Hawaiian island basalts penetrated by the Hawaii Scientific Drilling Project deep core hole

As part of the Hawaii Scientific Drilling Project (HSDP), an exploratory hole was drilled in 1993 to a depth of 1056 meters below sea level (mbsl) and a deeper hole was drilled to 3098 mbsl in 1999. A set of geophysical well logs was obtained in the deeper hole that provides fundamental information regarding the structure and the state of stress that exist within a volcanic shield. The acoustic televiewer generates digital, magnetically oriented images of the borehole wall, and inspection of this log yields a continuous record of fracture orientation with depth and also with age to 540 ka. The data depict a clockwise rotation in fracture strike through the surficial Mauna Loa basalts that settles to a constant heading in the underlying Mauna Kea rocks. This behavior reflects the depositional slope directions of lavas and the locations of volcanic sources relative to the drill site. The deviation log delineates the trajectory of the well bore in three-dimensional space. This path closely follows changes in fracture orientation with depth as the drill bit is generally prodded perpendicular to fracture strike during the drilling process. Stress-induced breakouts observed in the televiewer log identify the orientations ot the maximum and minimum horizontal principal stresses to be north-south and east-west, respectively. This stress state is attributed to the combination of a sharp break in onshore-offshore slope that reduces stress east-west and the emergence of Kilauea that increases stress north-south. Breakouts are extensive and appear over approximately 30% of the open hole. Copyright 2005 by the American Geophysical Union.

Journal of Geophysical Research B: Solid Earth↗
USGS1989

Answers from deep inside the Earth; Continental Scientific Drilling at Cajon Pass, California

Drilling of a 12,000-foot-deep scientific well has been completed at Cajon Pass in southern California to measure crustal properties, to determine crustal structure, and to better understanding the generation of earthquakes along the San Andreas fault. A joint effort of the National Science Foundation (NFS) and the U.S Geological Survey (USGS), the well was begun in November 1986, and is one of the first projects to be undertaken in the new national Continental Scientific Drilling Program. This program aims to enchance our knowledge of the compostiion, sturcture, dynamics, and evolution of the continental crust and of how these factors affect the origin and distribution of mineral and energy resources and natural phenomena such as volcanic eruptions and earthquakes.

California↗
USGS2012

Thermal regime of the State 2-14 well, Salton Sea Scientific Drilling Project

Temperature logs were made repeatedly during breaks in drilling and both during and after flow tests in the Salton Sea Scientific Drilling Project well (State 2–14). The purpose of these logs was to assist in identifying zones of fluid loss or grain and to characterize reservoir temperatures. At the conclusion of the active phase of the project, a series of logs was begun in an attempt to establish the equilibrium temperature profile. Initially, we were able to log to depths below 3 km, but beginning in late May of 1986, it was impossible to log below about 1.8 km owing to casing failure. Our best estimates of formation temperature below 1.8 km are 305° ± 5°C at 1890 m and 355° ± 10°C at 3170 m. For the upper 1.8 km the latest temperature log (October 24, 1986), using a digital “slickline” (heat-shielded downhole recording) device, was within a few degrees Celsius of equilibrium, as confirmed by a more recent log (July 31, 1987) to a depth of ∼ 1 km. As in most other wells in the Salton Sea geothermal field, there is an impermeable, thermally conductive “cap” on the hydrothermal system; this cap extends to a depth of more than 900 m at the State 2–14 well. Thermal conductivities of 19 samples of drill cuttings from this interval were measured at room temperature. The conductivity values were corrected for in situ porosity as determined from geophysical logs and for the effects of elevated temperature. Thermal gradients decrease from about 250 mK m −1 (same as degrees Celsius per kilometer) in the upper few hundred meters to just below 200 mK m −1 near the base of the conductive cap. Using one interpretation, thermal conductivities increase with depth (mainly because of decreasing porosity), resulting in component heat flows that agree reasonably well with the mean of about 450 m W m −2 . This value agrees well with heat flow data from shallow wells within the Salton Sea geothermal field. A second interpretation, in which measured temperature coefficients of quartz- and carbonate-rich rocks are used to correct thermal conductivity, results in lower mean conductivities that are roughly constant with depth and, consequently, systematically decreasing heat flux averaging about 350 mW m −2 below 300 m. This interpretation is consistent with the inference (from fluid inclusion studies) that the rocks in this part of the field were once several tens of degrees Celsius hotter than they are now. The age of this possible disturbance is estimated at a few thousand years.

Journal of Geophysical Research Solid Earth↗
USGS2012

Chemistry and geothermometry of brine produced from the Salton Sea Scientific drill hole, Imperial Valley, California

The December 29–30, 1985, flow test of the State 2–14 well, also known as the Salton Sea Scientific drill hole, produced fluid from a depth of 1865–1877 m at a reservoir temperature of 305° ± 5°C. Another flow test at a depth of 3170 m produced brine contaminated by drilling fluid and diesel oil. Therefore we focus on the first flow test. Samples were collected at five different flashing pressures. The brines are Na-Ca-K-Cl-type waters with very high metal and low SO 4 and HCO 3 contents. Compositions of the flashed brines were normalized relative to the 25°C densities of the solutions, and an ionic charge balance was achieved by adjusting the Na concentration. The composition of the preflashed reservoir fluid was calculated using enthalpy-chloride relations applied to the normalized and charge-balanced brines. The calculated total dissolved solids in the preflashed reservoir fluid ranges from about 24.8 wt %, assuming insignificant thermal losses from the erupting fluid before sampling, to 26.0 wt %, assuming a 10% enthalpy loss by conduction of thermal energy through casing and surface piping. The preferred total dissolved solids of the reservoir fluid is 25.05 wt %. The calculated specific density of the preflashed reservoir fluid at 305°C and 1870 m depth ranges from 0.9980 (no thermal loss prior to sampling) to 1.0107 ± 0.0023 g cm −3 (10% thermal loss). Of the various cation geothermometers that are now in common use, the Na-K-Ca method gives a temperature (310°C) closest to the measured temperature (305°C) in the production horizon. Calculated Na/K geothermometer temperatures, using equations suggested by different investigators, range from 326° to 364°C. The Mg/K 2 method gives a temperature of about 350°C, Mg/Li 2 about 282°, and Na/Li 395°–418°C.

Journal of Geophysical Research Solid Earth↗
USGS2019

The Bouse Formation: A controversial Neogene archive of the evolving Colorado River: A scientific drilling workshop report (Feb. 28-March 3, 2019-Bluewater Resort, Parker, Arizona, USA

Neogene deposits of the lower Colorado River valley, especially the Miocene(?) and early Pliocene Bouse Formation, have been the focus of intense debate regarding the early paleoenvironmental history of this important continental-scale river system in southwestern North America and its integration with the proto-Gulf of California. Fine-grained units within these Neogene deposits also hold a promising archive of Pliocene paleoclimate history for this part of the world. Because the depocenter deposits of the Bouse Formation and the deposits that overlie and underlie it are poorly exposed and highly weathered, the formation is ripe for study through collection of drill cores. A workshop was held 28 February–3 March 2019 in Parker, AZ, USA, to discuss how scientific drilling might be employed to help resolve the Bouse controversies and improve our understanding of paleoclimate history in the region.

Arizona, California, Nevada↗
USGS1996

Hydrogeology of the Hawaii Scientific Drilling Project borehole KP-1 1. Hydraulic conditions adjacent to the well bore

Temperature and formation resistivity logs obtained in borehole KP-1 of the Hawaii Scientific Drilling Project indicate that the adjacent formation is characterized by several zones of distinctly different average temperature and water salinity. A series of hydraulic analyses and water sampling programs were conducted to rule out the possibility of local hydraulic effects associated with the presence of the borehole in the generation of these apparent groundwater zones. Hydraulic tests and sampling with the borehole cased to a depth of 710 m and open below that depth indicate that the deep aquifer contains seawater at a temperature nearly identical to that of the open ocean at the same depth. Various analyses give estimates of aquifer transmissivity of about 10-3 m2/s in the vicinity of the borehole. Isolation of this deeper aquifer from the overlying groundwater zones was investigated by perforating the casing at six locations and then measuring the changes in water level in the borehole, in the salinity of the fluid column, in the temperature profile of the fluid column, and in the rate of flow in the fluid column induced by the perforations. These results positively confirm that the zones of distinctly different formation properties indicated on the temperature and resistivity logs are not caused by flow in or around casing. Flow and fluid column salinity induced by the perforations also confirm significant differences between the hydraulic heads and geochemistry of the different groundwater zones inferred from the well logs.

Journal of Geophysical Research B: Solid Earth↗
USGS2022

Alaska North Slope terrestrial gas hydrate systems: Insights from scientific drilling

A wealth of information has been accumulated regarding the occurrence of gas hydrates in nature, leading to significant advancements in our understanding of the geologic controls on their occurrence in both the terrestrial and marine settings of the Arctic. Gas hydrate accumulations discovered in the Alaska North Slope have been the focus of several important geoscience and production testing research programs. The Mount Elbert Gas Hydrate Stratigraphic Test Well of 2007 yielded one of the most complete geologic datasets on Arctic gas hydrate systems and important reservoir engineering data. The 2011/2012 field test of the Iġnik Sikumi gas hydrate production test well provided important insight into gas hydrate production technologies, yielding additional information on the petrophysical properties of gas hydrate reservoir systems. The Hydrate-01 Stratigraphic Test Well, drilled late in 2018, confirmed the geologic conditions at an Alaska North Slope drill site that was selected for an extended gas hydrate production test. In 2018, the US Geological Survey used information derived from previous scientific drilling programs to assess the volume of undiscovered, technically recoverable gas resources at a mean estimate of about 54 trillion cubic feet (~1.5 trillion cubic meters) within the gas hydrates in the North Slope of Alaska. This assessment has shown that the amount of gas stored as gas hydrates in this area is equal to about half of the known volume of conventional natural gas resources in the region.

Alaska↗
USGS2003

Paleointensity in Hawaiian Scientific Drilling Project Hole (HSDP2): Results from submarine basaltic glass

Paleointensity estimates based on the high quality Thellier‐Thellier data from the early Brunhes (420–780 ka) are rare (only 30 in the published literature). The Second Hawaiian Scientific Drilling Project (HSDP2) drill hole recovered submarine volcanics spanning the approximate time period of 420–550 ka. These are of particular interest for absolute paleointensity studies owing to the abundance of fresh submarine basaltic glass, which can preserve an excellent record of ancient geomagnetic field intensity. We present here new results of Thellier‐Thellier paleointensity experiments that nearly double the number of reliable paleointensity data available for the early Brunhes. We also show that the magnetizations of the associated submarine basalts are dominated by viscous magnetizations and therefore do not reflect the true ancient geomagnetic field intensity at the time of extrusion. The viscous contamination is particularly severe because of a combination of low blocking temperatures in the basalts and relatively high temperatures in the deeper parts of the drill core. Our new data, when placed on the approximate timescale available for HSDP and HSDP2, are at odds with other contemporaneous paleointensity data. The discrepancy can be reconciled by adjusting the HSDP timescales to be younger by about 35 kyr.

Geochemistry, Geophysics, Geosystems↗
USGS2025

Potential for continental scientific drilling to inform fault mechanics and earthquake science

Our understanding of fault mechanics and earthquake processes remains limited, largely due to minimal direct observations near active faults at seismogenic depths. This lack of data restricts our ability to accurately assess and mitigate both natural and human-induced seismic hazards. However, recent advancements in drilling capabilities and downhole sensing technologies offer an opportunity: the ability to observe the physical conditions within a volume near active fault zones. In this contribution, we highlight how scientific drilling can provide access to the near-fault environment, enabling measurements of the stress, temperature, fluid pressure, and rock properties at depths where ruptures initiate, propagate, and arrest. These observations are essential to refine models of earthquake nucleation and dynamic rupture, bridging gaps between laboratory experiments, numerical simulations, and surface observations. These insights can advance fundamental understanding in earthquake science but also support the development of more effective seismic hazard assessments and risk mitigation strategies.

Seismica↗
USGS2022

Virtual special issue of recent advances on gas hydrates scientific drilling in Alaska

Gas hydrate refers to a non-stoichiometric clathrate that forms spontaneously in the natural environment whenever sufficient quantities of gases of appropriate size (most commonly methane) interact with abundant water under specific conditions of temperature and pressure. (1,2) Such conditions occur wherever the shallow geothermal gradient has been suppressed by either deepwater or thick permafrost, allowing for relatively low temperatures to coexist with elevated pressures. The volume of gas hydrate on Earth is difficult to constrain, (3) but it is sufficient that gas hydrate is a meaningful potential component of (1) the long-term natural cycling of carbon, (2) the nearer term environmental changes in response to warming climates, (4) and (3) future energy supply systems. Since the initial recognition of gas hydrate as an abundant component in nature in the late 1960s, a series of scientific drilling expeditions conducted by both the Integrated Ocean Discovery Program (and successors) and national research and development programs in Canada, Japan, China, the United States, South Korea, and others (5) have explored the occurrence and nature of gas hydrates. In particular, the desire for expanded energy supply options to support the economic development and energy security for nations around the globe is currently motivating a broad range of laboratory and numerical simulation studies in support of an ongoing series of field-based scientific tests of the potential commercial viability of gas extraction from natural gas hydrate deposits. (6)

Journal of Energy & Fuels↗
USGS1993

Deep hydraulic fracturing stress measurements in the KTB (Germany) and Cajon Pass (USA) Scientific Drilling Projects: A summary

The determination of in situ stresses along deep vertical profiles was declared a key issue for two scientific deep drilling projects: the German Continental Deep Drilling Project (KTB) situated in northeast Bavaria in an area of complex variscian thrust tectonics and the CAJON PASS Project, located only about 4 km from the San Andreas Fault Zone In southern California. In the KTB project 7 successful hydrofrac stress measurements could be completed in a 4 km deep pilot hole between 0.8 to 3.0 km. At the Cajon Pass site a series of 23 hydrofrac stress measurements was performed in 2 wells between 0.9 to 3.5 km.

Bavaria, California↗